Add files via upload

Tutorials/011-Daisy_Getting_Started_Guide.md

@@ -0,0 +1,58 @@
+# Daisy Getting Started Guide
+
+This guide will walk you through getting 16-channel input on your Cyton+Daisy Module
+
+## I. SET UP YOUR CYTON BOARD
+
+Refer to the Cyton Tutorial page:
+[Cyton Getting Started Guide](http://docs.openbci.com/Tutorials/01-Cyton_Getting%20Started_Guide).
+
+Follow the guide through the end of Step V. CONNECT YOURSELF TO OPENBCI 
+
+## II. WHAT YOU NEED
+
+1. OpenBCI Daisy Module
+2. Y-Splitter Cable
+3. Electrode cables with female header termination on one end
+
+
+
+#### 1. [OpenBCI Daisy Module](https://shop.openbci.com/collections/frontpage/products/cyton-daisy-biosensing-boards-16-channel?variant=38959256526)
+<img src="https://github.com/OpenBCI/Docs/blob/master/assets/images/Daisy%20Front%20Image.jpg?raw=true" width="60%">
+
+#### 2. Y-Splitter Cable
+
+<img src="https://github.com/OpenBCI/Docs/blob/master/assets/images/Daisy%20Y-Splitter%20Image.jpg?raw=true" width="60%">
+	 
+#### 3. Electrode Cables with female header termination on one end
+
+<img src="https://github.com/OpenBCI/Docs/blob/master/assets/images/Daisy%20Female%20Header%20Termination%20Image.jpg?raw=true" width="60%">
+
+## III. ASSEMBLY
+
+### 1) Add the Daisy extension onto the Cyton Board 
+<img src="https://github.com/OpenBCI/Docs/blob/master/assets/images/Cyton%2BDaisy%20Front%20Image.JPG?raw=true" width="60%">
+
+### 2) Connect Y-Splitter Cable
+<img src="https://github.com/OpenBCI/Docs/blob/master/assets/images/Cyton%2BDaisy%2BY-Splitter.JPG?raw=true" width="60%">
+
+The Y-Splitter connects the bottom SRB pin of the Daisy Board to the bottom SRB pin of the Cyton Board
+
+### 3) Connect the bottom BIAS pin of the Cyton to your reference point
+
+<img src="https://github.com/OpenBCI/Docs/blob/master/assets/images/Cyton_Daisy_BIAS.jpg?raw=true" width="60%">
+
+### 4) Connect Cyton and Daisy bottom pins N1P through N8P to leads
+
+<img src="https://github.com/OpenBCI/Docs/blob/master/assets/images/MarkIV/Cyton_Daisy_Setup.JPG?raw=true" width="80%">
+
+Use the 16 of the color coded cables that came with your Ultracortex MarkIV headset.
+
+Connect Cyton bottom pins N1P through N8P to the cables, shown above. Then, connect the remaining 8 cables to Daisy bottom pins N1P through N8P. Color order does not matter. 
+
+Refer to the Ultracortex Mark IV [tutorial](http://docs.openbci.com/Headware/01-Ultracortex-Mark-IV) to learn how to connect the male terminations of the color coded cables to the electrodes on the headset.
+
+If you did not purchase a headset, you can use 16 of our [Gold Cup Electrodes](https://shop.openbci.com/collections/frontpage/products/openbci-gold-cup-electrodes?variant=9056028163), [Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958), or [Header Pin to Touch Proof Electrode Adapter](https://shop.openbci.com/collections/frontpage/products/touch-proof-electrode-cable-adapter?variant=31007211715).
+
+
+