wellton/OpenBCI_32bit_Library
1
0
Fork 0
Código Issues Pull Requests Ações Pacotes Projetos Versões Wiki Atividade
Arquivos
1d658784d76d9dfd4cbcecb29fd4596b91ac5c37
OpenBCI_32bit_Library/OpenBCI_32bit_Library.cpp
T
AJ Keller 1d658784d7 Fix numerous examples
2017-07-05 16:09:17 -04:00

3390 linhas
112 KiB
C++
Original Anotar Histórico

/*
OpenBCI 32bit Library
Place the containing folder into your libraries folder insdie the arduino folder in your Documents folder
This library will work with a single OpenBCI 32bit board, or
an OpenBCI 32bit board with an OpenBCI Daisy Module attached.
*/
#include "OpenBCI_32bit_Library.h"
/***************************************************/
/** PUBLIC METHODS *********************************/
/***************************************************/
// CONSTRUCTOR
OpenBCI_32bit_Library::OpenBCI_32bit_Library() {
initializeVariables();
}
/**
* @description: The function the OpenBCI board will call in setup.
* @author: AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::begin(void) {
// Bring the board up
boardBegin();
}
/**
* @description: The function the OpenBCI board will call in setup. Turns sniff mode
* on and allows you to tap into the serial port that is broken out on the OpenBCI
* 32bit board. You must alter this file:
* On Mac:
* `/Users/username/Documents/Arduino/hardware/chipkit-core/pic32/variants/openbci/Board_Defs.h`
* On Windows:
* `C:\Users\username\Documents\Arduino\hardware\chipkit-core\pic32\variants\openbci\Board_Defs.h`
* Specifically lines `311` and `313` from `7` and `10` to `11` and `12` for
* `_SER1_TX_PIN` and `_SER1_RX_PIN` respectively. Check out this sweet gif if
* you are a visual person http://g.recordit.co/3jH01sMD6Y.gif
* You will need to reflash your board! But now you can connect to pins `11`
* `12` via a FTDI serial port driver, really any serial to USB driver would
* work. Remember to use 3V3, 115200 baud, and have a common ground!
* @author: AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::beginDebug(void) {
beginDebug(OPENBCI_BAUD_RATE);
}
void OpenBCI_32bit_Library::beginDebug(uint32_t baudRate) {
// Bring the board up
curBoardMode = BOARD_MODE_DEBUG;
boolean started = boardBeginDebug(baudRate);
if (started) {
Serial1.println("Board up"); sendEOT();
} else {
Serial1.println("Board err"); sendEOT();
}
}
/**
* @description: The function the OpenBCI board will call in setup. This sets up the hardware serial port on D11 and D12
* @param `baudRate` {uint32_t} - The baud rate of the new secondary serial port
* @author: AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::beginSerial1(void) {
beginSerial1(OPENBCI_BAUD_RATE);
}
/**
* @description: The function the OpenBCI board will call in setup. This sets up the hardware serial port on D11 and D12
* @param `baudRate` {uint32_t} - The baud rate of the new secondary serial port
* @author: AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::beginSerial1(uint32_t baudRate) {
// Initalize the serial 1 port
pinMode(OPENBCI_PIN_SERIAL1_TX,OUTPUT);
pinMode(OPENBCI_PIN_SERIAL1_RX,INPUT);
if (Serial1) {
Serial1.end();
}
Serial1.begin(baudRate);
}
/**
* @description Called in every `loop()` and checks `Serial0`
* @returns {boolean} - `true` if there is data ready to be read
*/
boolean OpenBCI_32bit_Library::hasDataSerial0(void) {
// TODO: Need to undo this comment out
// if (!Serial0) return false;
// if (!iSerial0.rx) return false;
if (iSerial0.rx && Serial0.available()) {
return true;
} else {
return false;
}
}
/**
* @description Called in every `loop()` and checks `Serial0`
* @returns {boolean} - `true` if there is data ready to be read
*/
boolean OpenBCI_32bit_Library::hasDataSerial1(void) {
// TODO: Need to undo this comment out
// if (Serial1) return false;
// if (!iSerial1.rx) return false;
if (iSerial1.rx && Serial1.available()) {
return true;
} else {
return false;
}
}
/**
* @description Called if `hasDataSerial0` is true, returns a char from `Serial0`
* @returns {char} - A char from the serial port
*/
char OpenBCI_32bit_Library::getCharSerial0(void) {
return Serial0.read();
}
/**
* @description Called if `hasDataSerial1` is true, returns a char from `Serial1`
* @returns {char} - A char from the serial port
*/
char OpenBCI_32bit_Library::getCharSerial1(void) {
return Serial1.read();
}
/**
* @description While processing incoming multi byte messages these will turn
* true.
* @return {boolean} - True if processing a message and false otherwise
*/
boolean OpenBCI_32bit_Library::isProcessingMultibyteMsg(void) {
return isProcessingIncomingSettingsChannel || isProcessingIncomingSettingsLeadOff || settingBoardMode || settingSampleRate;
}
/**
* @description Process one char at a time from serial port. This is the main
* command processor for the OpenBCI system. Considered mission critical for
* normal operation.
* @param `character` {char} - The character to process.
* @return {boolean} - `true` if the command was recognized, `false` if not
*/
boolean OpenBCI_32bit_Library::processChar(char character) {
// Serial0.print("pC: "); Serial0.print(character); Serial0.print(" 0x"); Serial0.println(character, HEX);
if (curBoardMode == BOARD_MODE_DEBUG) {
Serial1.print("pC: "); Serial1.println(character);
}
if (isProcessingMultibyteMsg()) {
if (isProcessingIncomingSettingsChannel) {
processIncomingChannelSettings(character);
} else if (isProcessingIncomingSettingsLeadOff) {
processIncomingLeadOffSettings(character);
} else if (settingBoardMode) {
processIncomingBoardMode(character);
} else if (settingSampleRate) {
processIncomingSampleRate(character);
}
} else { // Normal...
switch (character){
//TURN CHANNELS ON/OFF COMMANDS
case OPENBCI_CHANNEL_OFF_1:
streamSafeChannelDeactivate(1);
break;
case OPENBCI_CHANNEL_OFF_2:
streamSafeChannelDeactivate(2);
break;
case OPENBCI_CHANNEL_OFF_3:
streamSafeChannelDeactivate(3);
break;
case OPENBCI_CHANNEL_OFF_4:
streamSafeChannelDeactivate(4);
break;
case OPENBCI_CHANNEL_OFF_5:
streamSafeChannelDeactivate(5);
break;
case OPENBCI_CHANNEL_OFF_6:
streamSafeChannelDeactivate(6);
break;
case OPENBCI_CHANNEL_OFF_7:
streamSafeChannelDeactivate(7);
break;
case OPENBCI_CHANNEL_OFF_8:
streamSafeChannelDeactivate(8);
break;
case OPENBCI_CHANNEL_OFF_9:
streamSafeChannelDeactivate(9);
break;
case OPENBCI_CHANNEL_OFF_10:
streamSafeChannelDeactivate(10);
break;
case OPENBCI_CHANNEL_OFF_11:
streamSafeChannelDeactivate(11);
break;
case OPENBCI_CHANNEL_OFF_12:
streamSafeChannelDeactivate(12);
break;
case OPENBCI_CHANNEL_OFF_13:
streamSafeChannelDeactivate(13);
break;
case OPENBCI_CHANNEL_OFF_14:
streamSafeChannelDeactivate(14);
break;
case OPENBCI_CHANNEL_OFF_15:
streamSafeChannelDeactivate(15);
break;
case OPENBCI_CHANNEL_OFF_16:
streamSafeChannelDeactivate(16);
break;
case OPENBCI_CHANNEL_ON_1:
streamSafeChannelActivate(1);
break;
case OPENBCI_CHANNEL_ON_2:
streamSafeChannelActivate(2);
break;
case OPENBCI_CHANNEL_ON_3:
streamSafeChannelActivate(3);
break;
case OPENBCI_CHANNEL_ON_4:
streamSafeChannelActivate(4);
break;
case OPENBCI_CHANNEL_ON_5:
streamSafeChannelActivate(5);
break;
case OPENBCI_CHANNEL_ON_6:
streamSafeChannelActivate(6);
break;
case OPENBCI_CHANNEL_ON_7:
streamSafeChannelActivate(7);
break;
case OPENBCI_CHANNEL_ON_8:
streamSafeChannelActivate(8);
break;
case OPENBCI_CHANNEL_ON_9:
streamSafeChannelActivate(9);
break;
case OPENBCI_CHANNEL_ON_10:
streamSafeChannelActivate(10);
break;
case OPENBCI_CHANNEL_ON_11:
streamSafeChannelActivate(11);
break;
case OPENBCI_CHANNEL_ON_12:
streamSafeChannelActivate(12);
break;
case OPENBCI_CHANNEL_ON_13:
streamSafeChannelActivate(13);
break;
case OPENBCI_CHANNEL_ON_14:
streamSafeChannelActivate(14);
break;
case OPENBCI_CHANNEL_ON_15:
streamSafeChannelActivate(15);
break;
case OPENBCI_CHANNEL_ON_16:
streamSafeChannelActivate(16);
break;
// TEST SIGNAL CONTROL COMMANDS
case OPENBCI_TEST_SIGNAL_CONNECT_TO_GROUND:
activateAllChannelsToTestCondition(ADSINPUT_SHORTED,ADSTESTSIG_NOCHANGE,ADSTESTSIG_NOCHANGE);
break;
case OPENBCI_TEST_SIGNAL_CONNECT_TO_PULSE_1X_SLOW:
activateAllChannelsToTestCondition(ADSINPUT_TESTSIG,ADSTESTSIG_AMP_1X,ADSTESTSIG_PULSE_SLOW);
break;
case OPENBCI_TEST_SIGNAL_CONNECT_TO_PULSE_1X_FAST:
activateAllChannelsToTestCondition(ADSINPUT_TESTSIG,ADSTESTSIG_AMP_1X,ADSTESTSIG_PULSE_FAST);
break;
case OPENBCI_TEST_SIGNAL_CONNECT_TO_DC:
activateAllChannelsToTestCondition(ADSINPUT_TESTSIG,ADSTESTSIG_AMP_2X,ADSTESTSIG_DCSIG);
break;
case OPENBCI_TEST_SIGNAL_CONNECT_TO_PULSE_2X_SLOW:
activateAllChannelsToTestCondition(ADSINPUT_TESTSIG,ADSTESTSIG_AMP_2X,ADSTESTSIG_PULSE_SLOW);
break;
case OPENBCI_TEST_SIGNAL_CONNECT_TO_PULSE_2X_FAST:
activateAllChannelsToTestCondition(ADSINPUT_TESTSIG,ADSTESTSIG_AMP_2X,ADSTESTSIG_PULSE_FAST);
break;
// CHANNEL SETTING COMMANDS
case OPENBCI_CHANNEL_CMD_SET: // This is the first byte that tells us to expect more commands
isProcessingIncomingSettingsChannel = true;
numberOfIncomingSettingsProcessedChannel = 1;
break;
// LEAD OFF IMPEDANCE DETECTION COMMANDS
case OPENBCI_CHANNEL_IMPEDANCE_SET:
isProcessingIncomingSettingsLeadOff = true;
numberOfIncomingSettingsProcessedLeadOff = 1;
break;
case OPENBCI_CHANNEL_DEFAULT_ALL_SET: // reset all channel settings to default
if(!streaming) {
printAll("updating channel settings to");
printAll(" default");
sendEOT();
}
streamSafeSetAllChannelsToDefault();
break;
case OPENBCI_CHANNEL_DEFAULT_ALL_REPORT: // report the default settings
reportDefaultChannelSettings();
break;
// DAISY MODULE COMMANDS
case OPENBCI_CHANNEL_MAX_NUMBER_8: // use 8 channel mode
if(daisyPresent){
removeDaisy();
}
break;
case OPENBCI_CHANNEL_MAX_NUMBER_16: // use 16 channel mode
if(daisyPresent == false){
attachDaisy();
}
if(daisyPresent){
printAll("16");
} else {
printAll("8");
}
sendEOT();
break;
// STREAM DATA AND FILTER COMMANDS
case OPENBCI_STREAM_START: // stream data
if(curAccelMode == ACCEL_MODE_ON){
enable_accel(RATE_25HZ);
} // fire up the accelerometer if you want it
// Serial0.println("streamStart - pc");
streamStart(); // turn on the fire hose
break;
case OPENBCI_STREAM_STOP: // stop streaming data
if(curAccelMode == ACCEL_MODE_ON){
disable_accel();
} // shut down the accelerometer if you're using it
streamStop();
break;
// INITIALIZE AND VERIFY
case OPENBCI_MISC_SOFT_RESET:
boardReset(); // initialize ADS and read device IDs
break;
// QUERY THE ADS AND ACCEL REGITSTERS
case OPENBCI_MISC_QUERY_REGISTER_SETTINGS:
if (!streaming) {
printAllRegisters(); // print the ADS and accelerometer register values
}
break;
// TIME SYNC
case OPENBCI_TIME_SET:
// Set flag to send time packet
if (!streaming && iSerial0.tx) {
Serial0.print("Time stamp ON");
sendEOT();
}
curTimeSyncMode = TIME_SYNC_MODE_ON;
setCurPacketType();
break;
case OPENBCI_TIME_STOP:
// Stop the Sync
if (!streaming) {
Serial0.print("Time stamp OFF");
sendEOT();
}
curTimeSyncMode = TIME_SYNC_MODE_OFF;
setCurPacketType();
break;
// BOARD TYPE SET TYPE
case OPENBCI_BOARD_MODE_SET:
settingBoardMode = true;
numberOfIncomingSettingsProcessedBoardType = 0;
optionalArgCounter = 0;
break;
// Sample rate set
case OPENBCI_SAMPLE_RATE_SET:
settingSampleRate = true;
break;
case OPENBCI_WIFI_ATTACH:
if (wifi.attach()) {
printSuccess();
printSerial("Wifi attached");
sendEOT();
} else {
printFailure();
printSerial("Wifi not attached");
sendEOT();
}
break;
case OPENBCI_WIFI_REMOVE:
if (wifi.remove()) {
printSuccess();
printSerial("Wifi removed");
} else {
printFailure();
printSerial("Wifi not removed");
}
sendEOT();
break;
case OPENBCI_WIFI_STATUS:
if (wifi.present) {
printAll("Wifi present");
} else {
printAll("Wifi not present, send {");
printAll(" to attach the shield");
}
sendEOT();
break;
case OPENBCI_WIFI_RESET:
wifi.reset();
printSerial("Wifi soft reset");
sendEOT();
break;
default:
return false;
}
}
return true;
}
/**
* Used to turn on or off the accel, will change the current packet type!
* @param yes {boolean} - True if you want to use it
*/
void OpenBCI_32bit_Library::useAccel(boolean yes) {
curAccelMode = yes ? ACCEL_MODE_ON : ACCEL_MODE_OFF;
setCurPacketType();
}
/**
* Used to turn on or off time syncing/stamping, will change the current packet type!
* @param yes {boolean} - True if you want to use it
*/
void OpenBCI_32bit_Library::useTimeStamp(boolean yes) {
curTimeSyncMode = yes ? TIME_SYNC_MODE_ON : TIME_SYNC_MODE_OFF;
setCurPacketType();
}
/**
* @description Reads a status register to see if there is new accelerometer
* data. This also takes into account if using accel or not.
* @returns {boolean} `true` if the accelerometer has new data.
*/
boolean OpenBCI_32bit_Library::accelHasNewData(void) {
return LIS3DH_DataAvailable();
}
/**
* @description Reads from the accelerometer to get new X, Y, and Z data. Updates
* the global array `axisData`.
*/
void OpenBCI_32bit_Library::accelUpdateAxisData(void) {
LIS3DH_updateAxisData();
}
/**
* @description Reads from the accelerometer to get new X, Y, and Z data.
*/
void OpenBCI_32bit_Library::accelWriteAxisDataSerial(void) {
LIS3DH_writeAxisDataSerial();
}
/**
* @description Reads from the accelerometer to get new X, Y, and Z data.
*/
void OpenBCI_32bit_Library::accelWriteAxisDataWifi(void) {
LIS3DH_writeAxisDataWifi();
}
/**
* @description: This is a function that is called once and confiures all pins on
* the PIC32 uC
* @author: AJ Keller (@pushtheworldllc)
*/
boolean OpenBCI_32bit_Library::boardBegin(void) {
// Initalize the serial port baud rate
Serial0.begin(OPENBCI_BAUD_RATE);
// Set serial 0 to true for rx and tx
iSerial0.tx = true;
iSerial0.rx = true;
iSerial0.baudRate = OPENBCI_BAUD_RATE;
pinMode(OPENBCI_PIN_LED, OUTPUT);
digitalWrite(OPENBCI_PIN_LED, HIGH);
pinMode(OPENBCI_PIN_PGC, OUTPUT);
// Startup the interrupt
boardBeginADSInterrupt();
// Do a soft reset
boardReset();
return true;
}
void OpenBCI_32bit_Library::boardBeginADSInterrupt(void) {
// Startup for interrupt
setIntVector(_EXTERNAL_4_VECTOR, ADS_DRDY_Service); // connect interrupt to ISR
setIntPriority(_EXTERNAL_4_VECTOR, 4, 0); // set interrupt priority and sub priority
clearIntFlag(_EXTERNAL_4_IRQ); // these two need to be done together
setIntEnable(_EXTERNAL_4_IRQ); // clear any flags before enabing the irq
}
/**
* @description: This is a function that is called once and confiures all pins on
* the PIC32 uC
* @author: AJ Keller (@pushtheworldllc)
*/
boolean OpenBCI_32bit_Library::boardBeginDebug(void) {
// Initalize the serial port baud rate
Serial0.begin(OPENBCI_BAUD_RATE);
iSerial0.tx = true;
iSerial0.rx = true;
iSerial0.baudRate = OPENBCI_BAUD_RATE;
// setSerialInfo(iSerial0, true, true, OPENBCI_BAUD_RATE);
// Serial1.print("begin S0 tx "); Serial1.println(iSerial0.tx ? "on" : "off");
// Initalize the serial debug port
Serial1.begin(OPENBCI_BAUD_RATE);
iSerial1.tx = true;
iSerial1.rx = true;
iSerial1.baudRate = OPENBCI_BAUD_RATE;
// setSerialInfo(iSerial1, true, true, OPENBCI_BAUD_RATE);
// Serial1.print("begin S1 tx "); Serial1.println(iSerial1.tx ? "on" : "off");
// Startup for interrupt
boardBeginADSInterrupt();
// Do a soft reset
boardReset();
return true;
}
/**
* @description: This is a function that is called once and confiures the Pic to run in secondary serial mode
* @param baudRate {int} - The baudRate you want the secondary serial port to run at.
* @author: AJ Keller (@pushtheworldllc)
*/
boolean OpenBCI_32bit_Library::boardBeginDebug(uint8_t baudRate) {
// Initalize the serial port baud rate
Serial0.begin(OPENBCI_BAUD_RATE);
iSerial0.tx = true;
iSerial0.rx = true;
iSerial0.baudRate = OPENBCI_BAUD_RATE;
// setSerialInfo(iSerial0, true, true, OPENBCI_BAUD_RATE);
// Serial1.print("begin S0 tx "); Serial1.println(iSerial0.tx ? "on" : "off");
// Initalize the serial debug port
Serial1.begin(baudRate);
iSerial1.tx = true;
iSerial1.rx = true;
iSerial1.baudRate = baudRate;
// setSerialInfo(iSerial1, true, true, OPENBCI_BAUD_RATE);
// Serial1.print("begin S1 tx "); Serial1.println(iSerial1.tx ? "on" : "off");
// Startup for interrupt
boardBeginADSInterrupt();
// Do a soft reset
boardReset();
return true;
}
/**
* @description: This is a function that can be called multiple times, this is
* what we refer to as a `soft reset`. You will hear/see this
* many times.
* @author: AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::boardReset(void) {
initialize(); // initalizes accelerometer and on-board ADS and on-daisy ADS if present
delay(500);
configureLeadOffDetection(LOFF_MAG_6NA, LOFF_FREQ_31p2HZ);
Serial0.println("OpenBCI V3 8-16 channel");
Serial0.print("On Board ADS1299 Device ID: 0x"); Serial0.println(ADS_getDeviceID(ON_BOARD),HEX);
if(daisyPresent){ // library will set this in initialize() if daisy present and functional
Serial0.print("On Daisy ADS1299 Device ID: 0x"); Serial0.println(ADS_getDeviceID(ON_DAISY),HEX);
}
Serial0.print("LIS3DH Device ID: 0x"); Serial0.println(LIS3DH_getDeviceID(),HEX);
Serial0.println("Firmware: v3.0.0");
sendEOT();
delay(5);
wifi.reset();
}
/**
* @description: Simple method to send the EOT over serial...
* @author: AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::sendEOT(void) {
printSerial("$$$");
wifi.sendStringLast();
}
void OpenBCI_32bit_Library::activateAllChannelsToTestCondition(byte testInputCode, byte amplitudeCode, byte freqCode)
{
boolean wasStreaming = streaming;
// Stop streaming if you are currently streaming
if (streaming) {
streamStop();
}
//set the test signal to the desired state
configureInternalTestSignal(amplitudeCode,freqCode);
//change input type settings for all channels
changeInputType(testInputCode);
// Restart stream if need be
if (wasStreaming) {
streamStart();
} else {
printSuccess();
printAll("Configured internal test signal.");
sendEOT();
}
}
void OpenBCI_32bit_Library::processIncomingBoardMode(char c) {
if (c == OPENBCI_BOARD_MODE_SET) {
printSuccess();
printAll(getBoardMode());
sendEOT();
} else if (isDigit(c)) {
uint8_t digit = c - '0';
if (digit <= BOARD_MODE_DIGITAL) {
setBoardMode(digit);
printSuccess();
printAll(getBoardMode());
sendEOT();
} else {
printFailure();
printAll("board mode value out of bounds.");
sendEOT();
}
} else {
printFailure();
printAll("invalid board mode value.");
sendEOT();
}
settingBoardMode = false;
}
/**
* Used to set the board mode of the system.
* @param newBoardMode The board mode to swtich to
*/
void OpenBCI_32bit_Library::setBoardMode(uint8_t newBoardMode) {
curBoardMode = (BOARD_MODE)newBoardMode;
switch (curBoardMode) {
case BOARD_MODE_ANALOG:
curAccelMode = ACCEL_MODE_OFF;
pinMode(11, INPUT);
pinMode(12, INPUT);
#ifdef USE_WIFI
if (!wifi.present) pinMode(13, INPUT);
#else
pinMode(13, INPUT);
#endif
break;
case BOARD_MODE_DIGITAL:
curAccelMode = ACCEL_MODE_OFF;
pinMode(11, INPUT);
pinMode(12, INPUT);
pinMode(17, INPUT);
// #if USE_WIFI
if (!wifi.present) pinMode(13, INPUT);
if (!wifi.present) pinMode(18, INPUT);
// #else
// pinMode(13, INPUT);
// pinMode(18, INPUT);
// #endif
break;
case BOARD_MODE_DEBUG:
curAccelMode = ACCEL_MODE_ON;
boardBeginDebug();
break;
case BOARD_MODE_DEFAULT:
curAccelMode = ACCEL_MODE_ON;
boardBegin();
break;
}
setCurPacketType();
}
void OpenBCI_32bit_Library::setSampleRate(uint8_t newSampleRateCode) {
curSampleRate = (SAMPLE_RATE)newSampleRateCode;
initialize_ads();
}
const char* OpenBCI_32bit_Library::getSampleRate() {
switch (curSampleRate) {
case SAMPLE_RATE_16000:
return "16000";
case SAMPLE_RATE_8000:
return "8000";
case SAMPLE_RATE_4000:
return "4000";
case SAMPLE_RATE_2000:
return "2000";
case SAMPLE_RATE_1000:
return "1000";
case SAMPLE_RATE_500:
return "500";
case SAMPLE_RATE_250:
default:
return "250";
}
}
const char* OpenBCI_32bit_Library::getBoardMode(void) {
switch (curBoardMode) {
case BOARD_MODE_DEBUG:
return "debug";
case BOARD_MODE_ANALOG:
return "analog";
case BOARD_MODE_DIGITAL:
return "digital";
case BOARD_MODE_DEFAULT:
default:
return "default";
}
}
void OpenBCI_32bit_Library::processIncomingSampleRate(char c) {
if (c == OPENBCI_SAMPLE_RATE_SET) {
printSuccess();
printAll(getSampleRate());
sendEOT();
} else if (isDigit(c)) {
uint8_t digit = c - '0';
if (digit <= SAMPLE_RATE_250) {
if (!streaming) {
setSampleRate(digit);
printSuccess();
printAll("Sample rate is ");
printAll(getSampleRate());
printAll("Hz");
sendEOT();
}
} else {
if (!streaming) {
printFailure();
printAll("sample value out of bounds");
sendEOT();
}
}
} else {
if (!streaming) {
printFailure();
printAll("invalid sample value");
sendEOT();
}
}
settingSampleRate = false;
}
/**
* @description When a 'x' is found on the serial port, we jump to this function
* where we continue to read from the serial port and read the
* remaining 7 bytes.
*/
void OpenBCI_32bit_Library::processIncomingChannelSettings(char character) {
if (character == OPENBCI_CHANNEL_CMD_LATCH && numberOfIncomingSettingsProcessedChannel < OPENBCI_NUMBER_OF_BYTES_SETTINGS_CHANNEL - 1) {
// We failed somehow and should just abort
numberOfIncomingSettingsProcessedChannel = 0;
// put flag back down
isProcessingIncomingSettingsChannel = false;
if (!streaming) {
printFailure();
printAll("too few chars");
sendEOT();
}
return;
}
switch (numberOfIncomingSettingsProcessedChannel) {
case 1: // channel number
currentChannelSetting = getChannelCommandForAsciiChar(character);
break;
case 2: // POWER_DOWN
channelSettings[currentChannelSetting][POWER_DOWN] = getNumberForAsciiChar(character);
break;
case 3: // GAIN_SET
channelSettings[currentChannelSetting][GAIN_SET] = getGainForAsciiChar(character);
break;
case 4: // INPUT_TYPE_SET
channelSettings[currentChannelSetting][INPUT_TYPE_SET] = getNumberForAsciiChar(character);
break;
case 5: // BIAS_SET
channelSettings[currentChannelSetting][BIAS_SET] = getNumberForAsciiChar(character);
break;
case 6: // SRB2_SET
channelSettings[currentChannelSetting][SRB2_SET] = getNumberForAsciiChar(character);
break;
case 7: // SRB1_SET
channelSettings[currentChannelSetting][SRB1_SET] = getNumberForAsciiChar(character);
break;
case 8: // 'X' latch
if (character != OPENBCI_CHANNEL_CMD_LATCH) {
if (!streaming) {
printFailure();
printAll("Err: 9th char not X");
sendEOT();
}
// We failed somehow and should just abort
numberOfIncomingSettingsProcessedChannel = 0;
// put flag back down
isProcessingIncomingSettingsChannel = false;
}
break;
default: // should have exited
if (!streaming) {
printFailure();
printAll("Err: too many chars");
sendEOT();
}
// We failed somehow and should just abort
numberOfIncomingSettingsProcessedChannel = 0;
// put flag back down
isProcessingIncomingSettingsChannel = false;
return;
}
// increment the number of bytes processed
numberOfIncomingSettingsProcessedChannel++;
if (numberOfIncomingSettingsProcessedChannel == (OPENBCI_NUMBER_OF_BYTES_SETTINGS_CHANNEL)) {
// We are done processing channel settings...
if (!streaming) {
char buf[2];
printSuccess();
printAll("Channel set for ");
printAll(itoa(currentChannelSetting + 1, buf, 10));
sendEOT();
}
// Set channel settings
streamSafeChannelSettingsForChannel(currentChannelSetting + 1, channelSettings[currentChannelSetting][POWER_DOWN], channelSettings[currentChannelSetting][GAIN_SET], channelSettings[currentChannelSetting][INPUT_TYPE_SET], channelSettings[currentChannelSetting][BIAS_SET], channelSettings[currentChannelSetting][SRB2_SET], channelSettings[currentChannelSetting][SRB1_SET]);
// Reset
numberOfIncomingSettingsProcessedChannel = 0;
// put flag back down
isProcessingIncomingSettingsChannel = false;
}
}
/**
* @description When a 'z' is found on the serial port, we jump to this function
* where we continue to read from the serial port and read the
* remaining 4 bytes.
* @param `character` - {char} - The character you want to process...
*/
void OpenBCI_32bit_Library::processIncomingLeadOffSettings(char character) {
if (character == OPENBCI_CHANNEL_IMPEDANCE_LATCH && numberOfIncomingSettingsProcessedLeadOff < OPENBCI_NUMBER_OF_BYTES_SETTINGS_LEAD_OFF - 1) {
// We failed somehow and should just abort
// reset numberOfIncomingSettingsProcessedLeadOff
numberOfIncomingSettingsProcessedLeadOff = 0;
// put flag back down
isProcessingIncomingSettingsLeadOff = false;
if (!streaming) {
printFailure();
printAll("too few chars");
sendEOT();
}
return;
}
switch (numberOfIncomingSettingsProcessedLeadOff) {
case 1: // channel number
currentChannelSetting = getChannelCommandForAsciiChar(character);
break;
case 2: // pchannel setting
leadOffSettings[currentChannelSetting][PCHAN] = getNumberForAsciiChar(character);
break;
case 3: // nchannel setting
leadOffSettings[currentChannelSetting][NCHAN] = getNumberForAsciiChar(character);
break;
case 4: // 'Z' latch
if (character != OPENBCI_CHANNEL_IMPEDANCE_LATCH) {
if (!streaming) {
printFailure();
printAll("Err: 5th char not Z");
sendEOT();
}
// We failed somehow and should just abort
// reset numberOfIncomingSettingsProcessedLeadOff
numberOfIncomingSettingsProcessedLeadOff = 0;
// put flag back down
isProcessingIncomingSettingsLeadOff = false;
}
break;
default: // should have exited
if (!streaming) {
printFailure();
printAll("Err: too many chars");
sendEOT();
}
// We failed somehow and should just abort
// reset numberOfIncomingSettingsProcessedLeadOff
numberOfIncomingSettingsProcessedLeadOff = 0;
// put flag back down
isProcessingIncomingSettingsLeadOff = false;
return;
}
// increment the number of bytes processed
numberOfIncomingSettingsProcessedLeadOff++;
if (numberOfIncomingSettingsProcessedLeadOff == (OPENBCI_NUMBER_OF_BYTES_SETTINGS_LEAD_OFF)) {
// We are done processing lead off settings...
if (!streaming) {
char buf[3];
printSuccess();
printAll("Lead off set for ");
printAll(itoa(currentChannelSetting + 1, buf, 10));
sendEOT();
}
// Set lead off settings
streamSafeLeadOffSetForChannel(currentChannelSetting + 1,leadOffSettings[currentChannelSetting][PCHAN],leadOffSettings[currentChannelSetting][NCHAN]);
// reset numberOfIncomingSettingsProcessedLeadOff
numberOfIncomingSettingsProcessedLeadOff = 0;
// put flag back down
isProcessingIncomingSettingsLeadOff = false;
}
}
// <<<<<<<<<<<<<<<<<<<<<<<<< BOARD WIDE FUNCTIONS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
void OpenBCI_32bit_Library::initialize(){
pinMode(SD_SS,OUTPUT); digitalWrite(SD_SS,HIGH); // de-select SDcard if present
pinMode(BOARD_ADS, OUTPUT); digitalWrite(BOARD_ADS,HIGH);
pinMode(DAISY_ADS, OUTPUT); digitalWrite(DAISY_ADS,HIGH);
pinMode(LIS3DH_SS,OUTPUT); digitalWrite(LIS3DH_SS,HIGH);
spi.begin();
spi.setSpeed(4000000); // use 4MHz for ADS and LIS3DH
spi.setMode(DSPI_MODE0); // default to SD card mode!
initialize_ads(); // hard reset ADS, set pin directions
initialize_accel(SCALE_4G); // set pin directions, G scale, DRDY interrupt, power down
}
// void __USER_ISR ADS_DRDY_Service() {
void __USER_ISR ADS_DRDY_Service() {
clearIntFlag(_EXTERNAL_4_IRQ); // clear the irq, or else it will continually interrupt!
if(bitRead(PORTA,0) == 0){
board.channelDataAvailable = true;
}
}
void OpenBCI_32bit_Library::initializeVariables(void) {
// Bools
channelDataAvailable = false;
daisyPresent = false;
isProcessingIncomingSettingsChannel = false;
isProcessingIncomingSettingsLeadOff = false;
settingBoardMode = false;
settingSampleRate = false;
streaming = false;
verbosity = false; // when verbosity is true, there will be Serial feedback
// Nums
currentChannelSetting = 0;
lastSampleTime = 0;
numberOfIncomingSettingsProcessedChannel = 0;
numberOfIncomingSettingsProcessedLeadOff = 0;
numberOfIncomingSettingsProcessedBoardType = 0;
sampleCounter = 0;
timeOfLastRead = 0;
// Enums
curAccelMode = ACCEL_MODE_ON;
curBoardMode = BOARD_MODE_DEFAULT;
curPacketType = PACKET_TYPE_ACCEL;
curSampleRate = SAMPLE_RATE_250;
curTimeSyncMode = TIME_SYNC_MODE_OFF;
// Structs
initializeSerialInfo(iSerial0);
initializeSerialInfo(iSerial1);
}
void OpenBCI_32bit_Library::initializeSerialInfo(SerialInfo si) {
setSerialInfo(si, false, false, OPENBCI_BAUD_RATE);
}
void OpenBCI_32bit_Library::setSerialInfo(SerialInfo si, boolean rx, boolean tx, uint32_t baudRate) {
si.baudRate = baudRate;
si.rx = rx;
si.tx = tx;
}
void OpenBCI_32bit_Library::printAllRegisters(){
if(!isRunning){
Serial0.println("\nBoard ADS Registers");
printADSregisters(BOARD_ADS);
if(daisyPresent){
Serial0.println("\nDaisy ADS Registers");
printADSregisters(DAISY_ADS);
}
Serial0.println("\nLIS3DH Registers");
LIS3DH_readAllRegs();
sendEOT();
}
}
void OpenBCI_32bit_Library::sendChannelData() {
sendChannelData(curPacketType);
}
/**
* @description Writes data to wifi and/or serial port.
*
* Adds stop byte `OPENBCI_EOP_STND_ACCEL`. See `OpenBCI_32bit_Library_Definitions.h`
*/
void OpenBCI_32bit_Library::sendChannelData(PACKET_TYPE packetType) {
if (wifi.tx) {
sendChannelDataWifi(packetType, false);
if (daisyPresent) sendChannelDataWifi(packetType, true);
}
// Send over bluetooth
if (iSerial0.tx || iSerial1.tx) sendChannelDataSerial(packetType);
if (packetType == PACKET_TYPE_ACCEL) LIS3DH_zeroAxisData();
if (packetType == PACKET_TYPE_RAW_AUX || packetType == PACKET_TYPE_RAW_AUX_TIME_SYNC) zeroAuxData();
sampleCounter++;
}
/**
* @description Writes channel data to serial port in the correct stream packet format.
* @param `packetType` {PACKET_TYPE} - The type of packet to send
* Adds stop byte see `OpenBCI_32bit_Library.h` enum PACKET_TYPE
*/
void OpenBCI_32bit_Library::sendChannelDataSerial(PACKET_TYPE packetType) {
writeSerial(OPENBCI_BOP); // 1 byte - 0x41
writeSerial(sampleCounter); // 1 byte
ADS_writeChannelData(); // 24 bytes
switch (packetType) {
case PACKET_TYPE_ACCEL:
accelWriteAxisDataSerial(); // 6 bytes
break;
case PACKET_TYPE_ACCEL_TIME_SET:
sendTimeWithAccelSerial();
curPacketType = PACKET_TYPE_ACCEL_TIME_SYNC;
break;
case PACKET_TYPE_ACCEL_TIME_SYNC:
sendTimeWithAccelSerial();
break;
case PACKET_TYPE_RAW_AUX_TIME_SET:
sendTimeWithRawAuxSerial();
curPacketType = PACKET_TYPE_RAW_AUX_TIME_SYNC;
break;
case PACKET_TYPE_RAW_AUX_TIME_SYNC:
sendTimeWithRawAuxSerial();
break;
case PACKET_TYPE_RAW_AUX:
default:
writeAuxDataSerial(); // 6 bytes
break;
}
writeSerial((uint8_t)(PCKT_END | packetType)); // 1 byte
}
/**
* @description Writes channel data to wifi in the correct stream packet format.
* @param `packetType` {PACKET_TYPE} - The type of packet to send
* @param `daisy` {boolean} - If this packet for the daisy
* Adds stop byte see `OpenBCI_32bit_Library.h` enum PACKET_TYPE
*/
void OpenBCI_32bit_Library::sendChannelDataWifi(PACKET_TYPE packetType, boolean daisy) {
wifi.storeByteBufTx((uint8_t)(PCKT_END | packetType)); // 1 byte
wifi.storeByteBufTx(sampleCounter); // 1 byte
ADS_writeChannelDataWifi(daisy); // 24 bytes
switch (packetType) {
case PACKET_TYPE_ACCEL:
accelWriteAxisDataWifi(); // 6 bytes
break;
case PACKET_TYPE_ACCEL_TIME_SET:
sendTimeWithAccelWifi();
curPacketType = PACKET_TYPE_ACCEL_TIME_SYNC;
break;
case PACKET_TYPE_ACCEL_TIME_SYNC:
sendTimeWithAccelWifi();
break;
case PACKET_TYPE_RAW_AUX_TIME_SET:
sendTimeWithRawAuxWifi();
curPacketType = PACKET_TYPE_RAW_AUX_TIME_SYNC;
break;
case PACKET_TYPE_RAW_AUX_TIME_SYNC:
sendTimeWithRawAuxWifi();
break;
case PACKET_TYPE_RAW_AUX:
default:
writeAuxDataWifi(); // 6 bytes
break;
}
wifi.flushBufferTx();
}
/**
* @description Writes channel data and `auxData` array to serial port in
* the correct stream packet format.
*
* Adds stop byte `OPENBCI_EOP_STND_RAW_AUX`. See `OpenBCI_32bit_Library_Definitions.h`
*/
void OpenBCI_32bit_Library::sendRawAuxWifi(void) {
writeAuxDataWifi(); // 6 bytes
}
/**
* @description Writes channel data, `axisData` array, and 4 byte unsigned time
* stamp in ms to serial port in the correct stream packet format.
*
* `axisData` will be split up and sent on the samples with `sampleCounter` of
* 7, 8, and 9 for X, Y, and Z respectively. Driver writers parse accordingly.
*
* If the global variable `sendTimeSyncUpPacket` is `true` (set by `processChar`
* getting a time sync set `<` command) then:
* Adds stop byte `OPENBCI_EOP_ACCEL_TIME_SET` and sets `sendTimeSyncUpPacket`
* to `false`.
* Else if `sendTimeSyncUpPacket` is `false` then:
* Adds stop byte `OPENBCI_EOP_ACCEL_TIME_SYNCED`
*/
void OpenBCI_32bit_Library::sendTimeWithAccelSerial(void) {
// send two bytes of either accel data or blank
switch (sampleCounter % 10) {
case ACCEL_AXIS_X: // 7
LIS3DH_writeAxisDataForAxisSerial(ACCEL_AXIS_X);
break;
case ACCEL_AXIS_Y: // 8
LIS3DH_writeAxisDataForAxisSerial(ACCEL_AXIS_Y);
break;
case ACCEL_AXIS_Z: // 9
LIS3DH_writeAxisDataForAxisSerial(ACCEL_AXIS_Z);
break;
default:
writeSerial((byte)0x00); // high byte
writeSerial((byte)0x00); // low byte
break;
}
writeTimeCurrentSerial(lastSampleTime); // 4 bytes
}
/**
* @description Writes channel data, `axisData` array, and 4 byte unsigned time
* stamp in ms to serial port in the correct stream packet format.
*
* `axisData` will be split up and sent on the samples with `sampleCounter` of
* 7, 8, and 9 for X, Y, and Z respectively. Driver writers parse accordingly.
*
* If the global variable `sendTimeSyncUpPacket` is `true` (set by `processChar`
* getting a time sync set `<` command) then:
* Adds stop byte `OPENBCI_EOP_ACCEL_TIME_SET` and sets `sendTimeSyncUpPacket`
* to `false`.
* Else if `sendTimeSyncUpPacket` is `false` then:
* Adds stop byte `OPENBCI_EOP_ACCEL_TIME_SYNCED`
*/
void OpenBCI_32bit_Library::sendTimeWithAccelWifi(void) {
// send two bytes of either accel data or blank
switch (sampleCounter % 10) {
case ACCEL_AXIS_X: // 7
LIS3DH_writeAxisDataForAxisWifi(ACCEL_AXIS_X);
break;
case ACCEL_AXIS_Y: // 8
LIS3DH_writeAxisDataForAxisWifi(ACCEL_AXIS_Y);
break;
case ACCEL_AXIS_Z: // 9
LIS3DH_writeAxisDataForAxisWifi(ACCEL_AXIS_Z);
break;
default:
wifi.storeByteBufTx((byte)0x00); // high byte
wifi.storeByteBufTx((byte)0x00); // low byte
break;
}
writeTimeCurrentWifi(lastSampleTime); // 4 bytes
}
/**
* Using publically available state variables to drive packet type settings
*/
void OpenBCI_32bit_Library::setCurPacketType(void) {
if (curAccelMode == ACCEL_MODE_ON && curTimeSyncMode == TIME_SYNC_MODE_ON) {
curPacketType = PACKET_TYPE_ACCEL_TIME_SET;
} else if(curAccelMode == ACCEL_MODE_OFF && curTimeSyncMode == TIME_SYNC_MODE_ON) {
curPacketType = PACKET_TYPE_RAW_AUX_TIME_SET;
} else if(curAccelMode == ACCEL_MODE_OFF && curTimeSyncMode == TIME_SYNC_MODE_OFF) {
curPacketType = PACKET_TYPE_RAW_AUX;
} else { // default accel on mode
// curAccelMode == ACCEL_MODE_ON && curTimeSyncMode == TIME_SYNC_MODE_OFF
curPacketType = PACKET_TYPE_ACCEL;
}
}
/**
* @description Writes channel data, `auxData[0]` 2 bytes, and 4 byte unsigned
* time stamp in ms to serial port in the correct stream packet format.
*
* If the global variable `sendTimeSyncUpPacket` is `true` (set by `processChar`
* getting a time sync set `<` command) then:
* Adds stop byte `OPENBCI_EOP_RAW_AUX_TIME_SET` and sets `sendTimeSyncUpPacket`
* to `false`.
* Else if `sendTimeSyncUpPacket` is `false` then:
* Adds stop byte `OPENBCI_EOP_RAW_AUX_TIME_SYNCED`
*/
void OpenBCI_32bit_Library::sendTimeWithRawAuxSerial(void) {
writeSerial(highByte(auxData[0])); // 2 bytes of aux data
writeSerial(lowByte(auxData[0]));
writeTimeCurrentSerial(lastSampleTime); // 4 bytes
}
void OpenBCI_32bit_Library::writeAuxDataSerial(void){
for(int i = 0; i < 3; i++){
writeSerial((uint8_t)highByte(auxData[i])); // write 16 bit axis data MSB first
writeSerial((uint8_t)lowByte(auxData[i])); // axisData is array of type short (16bit)
}
}
/**
* @description Writes channel data, `auxData[0]` 2 bytes, and 4 byte unsigned
* time stamp in ms to serial port in the correct stream packet format.
*/
void OpenBCI_32bit_Library::sendTimeWithRawAuxWifi(void) {
wifi.storeByteBufTx(highByte(auxData[0])); // 2 bytes of aux data
wifi.storeByteBufTx(lowByte(auxData[0]));
writeTimeCurrentWifi(lastSampleTime); // 4 bytes
}
void OpenBCI_32bit_Library::writeAuxDataWifi(void){
for(int i = 0; i < 3; i++){
wifi.storeByteBufTx((uint8_t)highByte(auxData[i])); // write 16 bit axis data MSB first
wifi.storeByteBufTx((uint8_t)lowByte(auxData[i])); // axisData is array of type short (16bit)
}
}
void OpenBCI_32bit_Library::zeroAuxData(void) {
for(int i = 0; i < 3; i++){
auxData[i] = 0; // reset auxData bytes to 0
}
}
void OpenBCI_32bit_Library::writeTimeCurrent(void) {
uint32_t newTime = millis(); // serialize the number, placing the MSB in lower packets
for (int j = 3; j >= 0; j--) {
write((uint8_t)(newTime >> (j*8)));
}
}
void OpenBCI_32bit_Library::writeTimeCurrentSerial(uint32_t newTime) {
// serialize the number, placing the MSB in lower packets
for (int j = 3; j >= 0; j--) {
writeSerial((uint8_t)(newTime >> (j*8)));
}
}
void OpenBCI_32bit_Library::writeTimeCurrentWifi(uint32_t newTime) {
// serialize the number, placing the MSB in lower packets
for (int j = 3; j >= 0; j--) {
wifi.storeByteBufTx((uint8_t)(newTime >> (j*8)));
}
}
//SPI communication method
byte OpenBCI_32bit_Library::xfer(byte _data)
{
byte inByte;
inByte = spi.transfer(_data);
return inByte;
}
//SPI chip select method
void OpenBCI_32bit_Library::csLow(int SS)
{ // select an SPI slave to talk to
switch(SS){
case BOARD_ADS:
spi.setMode(DSPI_MODE1);
spi.setSpeed(4000000);
digitalWrite(BOARD_ADS, LOW);
break;
case LIS3DH_SS:
spi.setMode(DSPI_MODE3);
spi.setSpeed(4000000);
digitalWrite(LIS3DH_SS, LOW);
break;
case SD_SS:
spi.setMode(DSPI_MODE0);
spi.setSpeed(20000000);
digitalWrite(SD_SS, LOW);
break;
case DAISY_ADS:
spi.setMode(DSPI_MODE1);
spi.setSpeed(4000000);
digitalWrite(DAISY_ADS, LOW);
break;
case BOTH_ADS:
spi.setMode(DSPI_MODE1);
spi.setSpeed(4000000);
digitalWrite(BOARD_ADS,LOW);
digitalWrite(DAISY_ADS,LOW);
break;
default:
break;
}
}
void OpenBCI_32bit_Library::csHigh(int SS)
{ // deselect SPI slave
switch(SS){
case BOARD_ADS:
digitalWrite(BOARD_ADS, HIGH);
break;
case LIS3DH_SS:
digitalWrite(LIS3DH_SS, HIGH);
break;
case SD_SS:
digitalWrite(SD_SS, HIGH);
break;
case DAISY_ADS:
digitalWrite(DAISY_ADS, HIGH);
break;
case BOTH_ADS:
digitalWrite(BOARD_ADS, HIGH);
digitalWrite(DAISY_ADS, HIGH);
break;
default:
break;
}
spi.setSpeed(20000000);
spi.setMode(DSPI_MODE0); // DEFAULT TO SD MODE!
}
// <<<<<<<<<<<<<<<<<<<<<<<<< END OF BOARD WIDE FUNCTIONS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
// *************************************************************************************
// <<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ADS1299 FUNCTIONS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
void OpenBCI_32bit_Library::initialize_ads(){
// recommended power up sequence requiers >Tpor (~32mS)
delay(50);
pinMode(ADS_RST,OUTPUT);
digitalWrite(ADS_RST,LOW); // reset pin connected to both ADS ICs
delayMicroseconds(4); // toggle reset pin
digitalWrite(ADS_RST,HIGH); // this will reset the Daisy if it is present
delayMicroseconds(20); // recommended to wait 18 Tclk before using device (~8uS);
// initalize the data ready chip select and reset pins:
pinMode(ADS_DRDY, INPUT); // we get DRDY asertion from the on-board ADS
delay(40);
resetADS(BOARD_ADS); // reset the on-board ADS registers, and stop DataContinuousMode
delay(10);
WREG(CONFIG1,(ADS1299_CONFIG1_DAISY | curSampleRate),BOARD_ADS); // tell on-board ADS to output its clk, set the data rate to 250SPS
delay(40);
resetADS(DAISY_ADS); // software reset daisy module if present
delay(10);
daisyPresent = smellDaisy(); // check to see if daisy module is present
if(!daisyPresent){
WREG(CONFIG1,(ADS1299_CONFIG1_DAISY_NOT | curSampleRate),BOARD_ADS); // turn off clk output if no daisy present
numChannels = 8; // expect up to 8 ADS channels
}else{
numChannels = 16; // expect up to 16 ADS channels
}
// DEFAULT CHANNEL SETTINGS FOR ADS
defaultChannelSettings[POWER_DOWN] = NO; // on = NO, off = YES
defaultChannelSettings[GAIN_SET] = ADS_GAIN24; // Gain setting
defaultChannelSettings[INPUT_TYPE_SET] = ADSINPUT_NORMAL;// input muxer setting
defaultChannelSettings[BIAS_SET] = YES; // add this channel to bias generation
defaultChannelSettings[SRB2_SET] = YES; // connect this P side to SRB2
defaultChannelSettings[SRB1_SET] = NO; // don't use SRB1
for(int i=0; i<numChannels; i++){
for(int j=0; j<6; j++){
channelSettings[i][j] = defaultChannelSettings[j]; // assign default settings
}
useInBias[i] = true; // keeping track of Bias Generation
useSRB2[i] = true; // keeping track of SRB2 inclusion
}
boardUseSRB1 = daisyUseSRB1 = false;
writeChannelSettings(); // write settings to the on-board and on-daisy ADS if present
WREG(CONFIG3,0b11101100,BOTH_ADS); delay(1); // enable internal reference drive and etc.
for(int i=0; i<numChannels; i++){ // turn off the impedance measure signal
leadOffSettings[i][PCHAN] = OFF;
leadOffSettings[i][NCHAN] = OFF;
}
verbosity = false; // when verbosity is true, there will be Serial feedback
firstDataPacket = true;
streaming = false;
}
//////////////////////////////////////////////
///////////// STREAM METHODS /////////////////
//////////////////////////////////////////////
/**
* @description Used to activate a channel, if running must stop and start after...
* @param channelNumber int the channel you want to change
* @author AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::streamSafeChannelActivate(byte channelNumber) {
boolean wasStreaming = streaming;
// Stop streaming if you are currently streaming
if (streaming) {
streamStop();
}
// Activate the channel
activateChannel(channelNumber);
// Restart stream if need be
if (wasStreaming) {
streamStart();
}
}
/**
* @description Used to deactivate a channel, if running must stop and start after...
* @param channelNumber int the channel you want to change
* @author AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::streamSafeChannelDeactivate(byte channelNumber){
boolean wasStreaming = streaming;
// Stop streaming if you are currently streaming
if (streaming) {
streamStop();
}
// deactivate the channel
deactivateChannel(channelNumber);
// Restart stream if need be
if (wasStreaming) {
streamStart();
}
}
/**
* @description Used to set lead off for a channel, if running must stop and start after...
* @param `channelNumber` - [byte] - The channel you want to change
* @param `pInput` - [byte] - Apply signal to P input, either ON (1) or OFF (0)
* @param `nInput` - [byte] - Apply signal to N input, either ON (1) or OFF (0)
* @author AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::streamSafeLeadOffSetForChannel(byte channelNumber, byte pInput, byte nInput) {
boolean wasStreaming = streaming;
// Stop streaming if you are currently streaming
if (streaming) {
streamStop();
}
changeChannelLeadOffDetect(channelNumber);
// leadOffSetForChannel(channelNumber, pInput, nInput);
// Restart stream if need be
if (wasStreaming) {
streamStart();
}
}
/**
* @description Used to set lead off for a channel, if running must stop and start after...
* @param see `.channelSettingsSetForChannel()` for parameters
* @author AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::streamSafeChannelSettingsForChannel(byte channelNumber, byte powerDown, byte gain, byte inputType, byte bias, byte srb2, byte srb1) {
boolean wasStreaming = streaming;
// Stop streaming if you are currently streaming
if (streaming) {
streamStop();
}
writeChannelSettings(channelNumber);
// channelSettingsSetForChannel(channelNumber, powerDown, gain, inputType, bias, srb2, srb1);
// Restart stream if need be
if (wasStreaming) {
streamStart();
}
}
/**
* @description Used to report (Serial0.print) the default channel settings
* if running must stop and start after...
* @author AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::streamSafeReportAllChannelDefaults(void) {
boolean wasStreaming = streaming;
// Stop streaming if you are currently streaming
if (streaming) {
streamStop();
}
reportDefaultChannelSettings();
// Restart stream if need be
if (wasStreaming) {
streamStart();
}
}
/**
* @description Used to set all channels on Board (and Daisy) to the default
* channel settings if running must stop and start after...
* @author AJ Keller (@pushtheworldllc)
*/
void OpenBCI_32bit_Library::streamSafeSetAllChannelsToDefault(void) {
boolean wasStreaming = streaming;
// Stop streaming if you are currently streaming
if (streaming) {
streamStop();
}
setChannelsToDefault();
// Restart stream if need be
if (wasStreaming) {
streamStart();
}
}
/**
* @description Call this to start the streaming data from the ADS1299
* @returns boolean if able to start streaming
*/
void OpenBCI_32bit_Library::streamStart(){ // needs daisy functionality
if (wifi.tx) {
uint8_t gains[numChannels];
for (uint8_t i = 0; i < numChannels; i++) {
gains[i] = channelSettings[i][GAIN_SET];
}
// TODO: Remove this debug line
wifi.sendGains(numChannels, gains);
}
streaming = true;
startADS();
if (curBoardMode == BOARD_MODE_DEBUG) {
Serial1.println("ADS Started");
}
}
/**
* @description Call this to stop streaming from the ADS1299
* @returns boolean if able to stop streaming
*/
void OpenBCI_32bit_Library::streamStop(){
streaming = false;
stopADS();
if (curBoardMode == BOARD_MODE_DEBUG) {
Serial1.println("ADS Stopped");
}
}
//////////////////////////////////////////////
////////////// DAISY METHODS /////////////////
//////////////////////////////////////////////
boolean OpenBCI_32bit_Library::smellDaisy(void){ // check if daisy present
boolean isDaisy = false;
byte setting = RREG(ID_REG,DAISY_ADS); // try to read the daisy product ID
if(verbosity){Serial0.print("Daisy ID 0x"); Serial0.println(setting,HEX); sendEOT();}
if(setting == ADS_ID) {isDaisy = true;} // should read as 0x3E
return isDaisy;
}
void OpenBCI_32bit_Library::removeDaisy(void){
if(daisyPresent){
// Daisy removed
SDATAC(DAISY_ADS);
RESET(DAISY_ADS);
STANDBY(DAISY_ADS);
daisyPresent = false;
if(!isRunning) {
printAll("daisy removed");
sendEOT();
}
}else{
if(!isRunning) {
printAll("no daisy to remove!");
sendEOT();
}
}
}
void OpenBCI_32bit_Library::attachDaisy(void){
WREG(CONFIG1,(ADS1299_CONFIG1_DAISY | curSampleRate),BOARD_ADS); // tell on-board ADS to output the clk, set the data rate to 250SPS
delay(40);
resetADS(DAISY_ADS); // software reset daisy module if present
delay(10);
daisyPresent = smellDaisy();
if(!daisyPresent){
WREG(CONFIG1,(ADS1299_CONFIG1_DAISY_NOT | curSampleRate),BOARD_ADS); // turn off clk output if no daisy present
numChannels = 8; // expect up to 8 ADS channels
if(!isRunning) {
printAll("no daisy to attach!");
}
}else{
numChannels = 16; // expect up to 16 ADS channels
if(!isRunning) {
printAll("daisy attached");
}
}
}
//reset all the ADS1299's settings. Stops all data acquisition
void OpenBCI_32bit_Library::resetADS(int targetSS)
{
int startChan, stopChan;
if(targetSS == BOARD_ADS) {startChan = 1; stopChan = 8;}
if(targetSS == DAISY_ADS) {startChan = 9; stopChan = 16;}
RESET(targetSS); // send RESET command to default all registers
SDATAC(targetSS); // exit Read Data Continuous mode to communicate with ADS
delay(100);
// turn off all channels
for (int chan=startChan; chan <= stopChan; chan++) {
deactivateChannel(chan);
}
}
void OpenBCI_32bit_Library::setChannelsToDefault(void){
for(int i=0; i<numChannels; i++){
for(int j=0; j<6; j++){
channelSettings[i][j] = defaultChannelSettings[j];
}
useInBias[i] = true; // keeping track of Bias Generation
useSRB2[i] = true; // keeping track of SRB2 inclusion
}
boardUseSRB1 = daisyUseSRB1 = false;
writeChannelSettings(); // write settings to on-board ADS
for(int i=0; i<numChannels; i++){ // turn off the impedance measure signal
leadOffSettings[i][PCHAN] = OFF;
leadOffSettings[i][NCHAN] = OFF;
}
changeChannelLeadOffDetect(); // write settings to all ADS
WREG(MISC1,0x00,BOARD_ADS); // open SRB1 switch on-board
if(daisyPresent){ WREG(MISC1,0x00,DAISY_ADS); } // open SRB1 switch on-daisy
}
// void OpenBCI_32bit_Library::setChannelsToDefault(void){
// // Reset the global channel settings array to default
// resetChannelSettingsArrayToDefault(channelSettings);
// // Write channel settings to board (and daisy) ADS
// channelSettingsArraySetForAll();
// // Reset the global lead off settings array to default
// resetLeadOffArrayToDefault(leadOffSettings);
// // Write lead off settings to board (and daisy) ADS
// leadOffSetForAllChannels();
// WREG(MISC1,0x00,BOARD_ADS); // open SRB1 switch on-board
// if(daisyPresent){ // open SRB1 switch on-daisy
// WREG(MISC1,0x00,DAISY_ADS);
// }
// }
/**
* @description Writes the default channel settings over the serial port
*/
void OpenBCI_32bit_Library::reportDefaultChannelSettings(void){
Serial0.write(getDefaultChannelSettingForSettingAscii(POWER_DOWN)); // on = NO, off = YES
Serial0.write(getDefaultChannelSettingForSettingAscii(GAIN_SET)); // Gain setting
Serial0.write(getDefaultChannelSettingForSettingAscii(INPUT_TYPE_SET)); // input muxer setting
Serial0.write(getDefaultChannelSettingForSettingAscii(BIAS_SET)); // add this channel to bias generation
Serial0.write(getDefaultChannelSettingForSettingAscii(SRB2_SET)); // connect this P side to SRB2
Serial0.write(getDefaultChannelSettingForSettingAscii(SRB1_SET)); // don't use SRB1
sendEOT();
}
/**
* @description Set all channels using global channelSettings array
* @author AJ Keller (@pushtheworldllc)
*/
// void OpenBCI_32bit_Library::channelSettingsArraySetForAll(void) {
// byte channelNumberUpperLimit;
// // The upper limit of the channels, either 8 or 16
// channelNumberUpperLimit = daisyPresent ? OPENBCI_NUMBER_OF_CHANNELS_DAISY : OPENBCI_NUMBER_OF_CHANNELS_DEFAULT;
// // Loop through all channels
// for (byte i = 1; i <= channelNumberUpperLimit; i++) {
// // Set for this channel
// channelSettingsSetForChannel(i, channelSettings[i][POWER_DOWN], channelSettings[i][GAIN_SET], channelSettings[i][INPUT_TYPE_SET], channelSettings[i][BIAS_SET], channelSettings[i][SRB2_SET], channelSettings[i][SRB1_SET]);
// }
// }
/**
* @description Set channel using global channelSettings array for channelNumber
* @param `channelNumber` - [byte] - 1-16 channel number
* @author AJ Keller (@pushtheworldllc)
*/
// void OpenBCI_32bit_Library::channelSettingsArraySetForChannel(byte channelNumber) {
// // contstrain the channel number to 0-15
// char index = getConstrainedChannelNumber(channelNumber);
// // Set for this channel
// channelSettingsSetForChannel(channelNumber, channelSettings[index][POWER_DOWN], channelSettings[index][GAIN_SET], channelSettings[index][INPUT_TYPE_SET], channelSettings[index][BIAS_SET], channelSettings[index][SRB2_SET], channelSettings[index][SRB1_SET]);
// }
/**
* @description To add a usability abstraction layer above channel setting commands. Due to the
* extensive and highly specific nature of the channel setting command chain.
* @param `channelNumber` - [byte] (1-16) for index, so convert channel to array prior
* @param `powerDown` - [byte] - YES (1) or NO (0)
* Powers channel down
* @param `gain` - [byte] - Sets the gain for the channel
* ADS_GAIN01 (0b00000000) // 0x00
* ADS_GAIN02 (0b00010000) // 0x10
* ADS_GAIN04 (0b00100000) // 0x20
* ADS_GAIN06 (0b00110000) // 0x30
* ADS_GAIN08 (0b01000000) // 0x40
* ADS_GAIN12 (0b01010000) // 0x50
* ADS_GAIN24 (0b01100000) // 0x60
* @param `inputType` - [byte] - Selects the ADC channel input source, either:
* ADSINPUT_NORMAL (0b00000000)
* ADSINPUT_SHORTED (0b00000001)
* ADSINPUT_BIAS_MEAS (0b00000010)
* ADSINPUT_MVDD (0b00000011)
* ADSINPUT_TEMP (0b00000100)
* ADSINPUT_TESTSIG (0b00000101)
* ADSINPUT_BIAS_DRP (0b00000110)
* ADSINPUT_BIAL_DRN (0b00000111)
* @param `bias` - [byte] (YES (1) -> Include in bias (default), NO (0) -> remove from bias)
* selects to include the channel input in bias generation
* @param `srb2` - [byte] (YES (1) -> Connect this input to SRB2 (default),
* NO (0) -> Disconnect this input from SRB2)
* Select to connect (YES) this channel's P input to the SRB2 pin. This closes
* a switch between P input and SRB2 for the given channel, and allows the
* P input to also remain connected to the ADC.
* @param `srb1` - [byte] (YES (1) -> connect all N inputs to SRB1,
* NO (0) -> Disconnect all N inputs from SRB1 (default))
* Select to connect (YES) all channels' N inputs to SRB1. This effects all pins,
* and disconnects all N inputs from the ADC.
* @author AJ Keller (@pushtheworldllc)
*/
// void OpenBCI_32bit_Library::channelSettingsSetForChannel(byte channelNumber, byte powerDown, byte gain, byte inputType, byte bias, byte srb2, byte srb1) {
// byte setting, targetSS;
// // contstrain the channel number to 0-15
// char index = getConstrainedChannelNumber(channelNumber);
// // Get the slave select pin for this channel
// targetSS = getTargetSSForConstrainedChannelNumber(index);
// if (sniffMode && Serial1) {
// if (targetSS == BOARD_ADS) {
// Serial1.print("Set channel "); Serial1.print(channelNumber); Serial1.println(" settings");
// }
// }
// // first, disable any data collection
// SDATAC(targetSS); delay(1); // exit Read Data Continuous mode to communicate with ADS
// setting = 0x00;
// // Set the power down bit
// if(powerDown == YES) {
// setting |= 0x80;
// }
// // Set the gain bits
// setting |= gain;
// // Set input type bits
// setting |= inputType;
// if(srb2 == YES){
// setting |= 0x08; // close this SRB2 switch
// useSRB2[index] = true; // keep track of SRB2 usage
// }else{
// useSRB2[index] = false;
// }
// byte channelNumberRegister = 0x00;
// // Since we are addressing 8 bit registers, we need to subtract 8 from the
// // channelNumber if we are addressing the Daisy ADS
// if (targetSS == DAISY_ADS) {
// channelNumberRegister = index - OPENBCI_NUMBER_OF_CHANNELS_DEFAULT;
// } else {
// channelNumberRegister = index;
// }
// WREG(CH1SET+channelNumberRegister, setting, targetSS); // write this channel's register settings
// // add or remove from inclusion in BIAS generation
// setting = RREG(BIAS_SENSP,targetSS); //get the current P bias settings
// if(bias == YES){
// useInBias[index] = true;
// bitSet(setting,channelNumberRegister); //set this channel's bit to add it to the bias generation
// }else{
// useInBias[index] = false;
// bitClear(setting,channelNumberRegister); // clear this channel's bit to remove from bias generation
// }
// WREG(BIAS_SENSP,setting,targetSS); delay(1); //send the modified byte back to the ADS
// setting = RREG(BIAS_SENSN,targetSS); //get the current N bias settings
// if(bias == YES){
// bitSet(setting,channelNumberRegister); //set this channel's bit to add it to the bias generation
// }else{
// bitClear(setting,channelNumberRegister); // clear this channel's bit to remove from bias generation
// }
// WREG(BIAS_SENSN,setting,targetSS); delay(1); //send the modified byte back to the ADS
// byte startChan = targetSS == BOARD_ADS ? 0 : OPENBCI_CHANNEL_MAX_NUMBER_8 - 1;
// byte endChan = targetSS == BOARD_ADS ? OPENBCI_CHANNEL_MAX_NUMBER_8 : OPENBCI_CHANNEL_MAX_NUMBER_16 - 1;
// // if SRB1 is closed or open for one channel, it will be the same for all channels
// if(srb1 == YES){
// for(int i=startChan; i<endChan; i++){
// channelSettings[i][SRB1_SET] = YES;
// }
// if(targetSS == BOARD_ADS) boardUseSRB1 = true;
// if(targetSS == DAISY_ADS) daisyUseSRB1 = true;
// setting = 0x20; // close SRB1 swtich
// }
// if(srb1 == NO){
// for(int i=startChan; i<endChan; i++){
// channelSettings[i][SRB1_SET] = NO;
// }
// if(targetSS == BOARD_ADS) boardUseSRB1 = false;
// if(targetSS == DAISY_ADS) daisyUseSRB1 = false;
// setting = 0x00; // open SRB1 switch
// }
// WREG(MISC1,setting,targetSS);
// }
// write settings for ALL 8 channels for a given ADS board
// channel settings: powerDown, gain, inputType, SRB2, SRB1
void OpenBCI_32bit_Library::writeChannelSettings(){
boolean use_SRB1 = false;
byte setting, startChan, endChan, targetSS;
for(int b=0; b<2; b++){
if(b == 0){ targetSS = BOARD_ADS; startChan = 0; endChan = 8; }
if(b == 1){
if(!daisyPresent){ return; }
targetSS = DAISY_ADS; startChan = 8; endChan = 16;
}
SDATAC(targetSS); delay(1); // exit Read Data Continuous mode to communicate with ADS
for(byte i=startChan; i<endChan; i++){ // write 8 channel settings
setting = 0x00;
if(channelSettings[i][POWER_DOWN] == YES){setting |= 0x80;}
setting |= channelSettings[i][GAIN_SET]; // gain
setting |= channelSettings[i][INPUT_TYPE_SET]; // input code
if(channelSettings[i][SRB2_SET] == YES){
setting |= 0x08; // close this SRB2 switch
useSRB2[i] = true; // remember SRB2 state for this channel
}else{
useSRB2[i] = false; // rememver SRB2 state for this channel
}
WREG(CH1SET+(i-startChan),setting,targetSS); // write this channel's register settings
// add or remove this channel from inclusion in BIAS generation
setting = RREG(BIAS_SENSP,targetSS); //get the current P bias settings
if(channelSettings[i][BIAS_SET] == YES){
bitSet(setting,i-startChan); useInBias[i] = true; //add this channel to the bias generation
}else{
bitClear(setting,i-startChan); useInBias[i] = false; //remove this channel from bias generation
}
WREG(BIAS_SENSP,setting,targetSS); delay(1); //send the modified byte back to the ADS
setting = RREG(BIAS_SENSN,targetSS); //get the current N bias settings
if(channelSettings[i][BIAS_SET] == YES){
bitSet(setting,i-startChan); //set this channel's bit to add it to the bias generation
}else{
bitClear(setting,i-startChan); // clear this channel's bit to remove from bias generation
}
WREG(BIAS_SENSN,setting,targetSS); delay(1); //send the modified byte back to the ADS
if(channelSettings[i][SRB1_SET] == YES){
use_SRB1 = true; // if any of the channel setting closes SRB1, it is closed for all
}
} // end of CHnSET and BIAS settings
} // end of board select loop
if(use_SRB1){
for(int i=startChan; i<endChan; i++){
channelSettings[i][SRB1_SET] = YES;
}
WREG(MISC1,0x20,targetSS); // close SRB1 swtich
if(targetSS == BOARD_ADS){ boardUseSRB1 = true; }
if(targetSS == DAISY_ADS){ daisyUseSRB1 = true; }
}else{
for(int i=startChan; i<endChan; i++){
channelSettings[i][SRB1_SET] = NO;
}
WREG(MISC1,0x00,targetSS); // open SRB1 switch
if(targetSS == BOARD_ADS){ boardUseSRB1 = false; }
if(targetSS == DAISY_ADS){ daisyUseSRB1 = false; }
}
}
// write settings for a SPECIFIC channel on a given ADS board
void OpenBCI_32bit_Library::writeChannelSettings(byte N){
byte setting, startChan, endChan, targetSS;
if(N < 9){ // channels 1-8 on board
targetSS = BOARD_ADS; startChan = 0; endChan = 8;
}else{ // channels 9-16 on daisy module
if(!daisyPresent) { return; }
targetSS = DAISY_ADS; startChan = 8; endChan = 16;
}
// function accepts channel 1-16, must be 0 indexed to work with array
N = constrain(N-1,startChan,endChan-1); //subtracts 1 so that we're counting from 0, not 1
// first, disable any data collection
SDATAC(targetSS); delay(1); // exit Read Data Continuous mode to communicate with ADS
setting = 0x00;
if(channelSettings[N][POWER_DOWN] == YES) setting |= 0x80;
setting |= channelSettings[N][GAIN_SET]; // gain
setting |= channelSettings[N][INPUT_TYPE_SET]; // input code
if(channelSettings[N][SRB2_SET] == YES){
setting |= 0x08; // close this SRB2 switch
useSRB2[N] = true; // keep track of SRB2 usage
}else{
useSRB2[N] = false;
}
WREG(CH1SET+(N-startChan), setting, targetSS); // write this channel's register settings
// add or remove from inclusion in BIAS generation
setting = RREG(BIAS_SENSP,targetSS); //get the current P bias settings
if(channelSettings[N][BIAS_SET] == YES){
useInBias[N] = true;
bitSet(setting,N-startChan); //set this channel's bit to add it to the bias generation
}else{
useInBias[N] = false;
bitClear(setting,N-startChan); // clear this channel's bit to remove from bias generation
}
WREG(BIAS_SENSP,setting,targetSS); delay(1); //send the modified byte back to the ADS
setting = RREG(BIAS_SENSN,targetSS); //get the current N bias settings
if(channelSettings[N][BIAS_SET] == YES){
bitSet(setting,N-startChan); //set this channel's bit to add it to the bias generation
}else{
bitClear(setting,N-startChan); // clear this channel's bit to remove from bias generation
}
WREG(BIAS_SENSN,setting,targetSS); delay(1); //send the modified byte back to the ADS
// if SRB1 is closed or open for one channel, it will be the same for all channels
if(channelSettings[N][SRB1_SET] == YES){
for(int i=startChan; i<endChan; i++){
channelSettings[i][SRB1_SET] = YES;
}
if(targetSS == BOARD_ADS) boardUseSRB1 = true;
if(targetSS == DAISY_ADS) daisyUseSRB1 = true;
setting = 0x20; // close SRB1 swtich
}
if(channelSettings[N][SRB1_SET] == NO){
for(int i=startChan; i<endChan; i++){
channelSettings[i][SRB1_SET] = NO;
}
if(targetSS == BOARD_ADS) boardUseSRB1 = false;
if(targetSS == DAISY_ADS) daisyUseSRB1 = false;
setting = 0x00; // open SRB1 switch
}
WREG(MISC1,setting,targetSS);
}
// deactivate the given channel.
void OpenBCI_32bit_Library::deactivateChannel(byte N) {
byte setting, startChan, endChan, targetSS;
if(N < 9){
targetSS = BOARD_ADS; startChan = 0; endChan = 8;
}else{
if(!daisyPresent) { return; }
targetSS = DAISY_ADS; startChan = 8; endChan = 16;
}
SDATAC(targetSS); delay(1); // exit Read Data Continuous mode to communicate with ADS
N = constrain(N-1,startChan,endChan-1); //subtracts 1 so that we're counting from 0, not 1
setting = RREG(CH1SET+(N-startChan),targetSS); delay(1); // get the current channel settings
bitSet(setting,7); // set bit7 to shut down channel
bitClear(setting,3); // clear bit3 to disclude from SRB2 if used
WREG(CH1SET+(N-startChan),setting,targetSS); delay(1); // write the new value to disable the channel
//remove the channel from the bias generation...
setting = RREG(BIAS_SENSP,targetSS); delay(1); //get the current bias settings
bitClear(setting,N-startChan); //clear this channel's bit to remove from bias generation
WREG(BIAS_SENSP,setting,targetSS); delay(1); //send the modified byte back to the ADS
setting = RREG(BIAS_SENSN,targetSS); delay(1); //get the current bias settings
bitClear(setting,N-startChan); //clear this channel's bit to remove from bias generation
WREG(BIAS_SENSN,setting,targetSS); delay(1); //send the modified byte back to the ADS
leadOffSettings[N][0] = leadOffSettings[N][1] = NO;
changeChannelLeadOffDetect(N+1);
}
void OpenBCI_32bit_Library::activateChannel(byte N)
{
byte setting, startChan, endChan, targetSS;
if(N < 9){
targetSS = BOARD_ADS; startChan = 0; endChan = 8;
}else{
if(!daisyPresent) { return; }
targetSS = DAISY_ADS; startChan = 8; endChan = 16;
}
N = constrain(N-1,startChan,endChan-1); // 0-7 or 8-15
SDATAC(targetSS); // exit Read Data Continuous mode to communicate with ADS
setting = 0x00;
// channelSettings[N][POWER_DOWN] = NO; // keep track of channel on/off in this array REMOVE?
setting |= channelSettings[N][GAIN_SET]; // gain
setting |= channelSettings[N][INPUT_TYPE_SET]; // input code
if(useSRB2[N] == true){channelSettings[N][SRB2_SET] = YES;}else{channelSettings[N][SRB2_SET] = NO;}
if(channelSettings[N][SRB2_SET] == YES) {bitSet(setting,3);} // close this SRB2 switch
WREG(CH1SET+(N-startChan),setting,targetSS);
// add or remove from inclusion in BIAS generation
if(useInBias[N]){channelSettings[N][BIAS_SET] = YES;}else{channelSettings[N][BIAS_SET] = NO;}
setting = RREG(BIAS_SENSP,targetSS); //get the current P bias settings
if(channelSettings[N][BIAS_SET] == YES){
bitSet(setting,N-startChan); //set this channel's bit to add it to the bias generation
useInBias[N] = true;
}else{
bitClear(setting,N-startChan); // clear this channel's bit to remove from bias generation
useInBias[N] = false;
}
WREG(BIAS_SENSP,setting,targetSS); delay(1); //send the modified byte back to the ADS
setting = RREG(BIAS_SENSN,targetSS); //get the current N bias settings
if(channelSettings[N][BIAS_SET] == YES){
bitSet(setting,N-startChan); //set this channel's bit to add it to the bias generation
}else{
bitClear(setting,N-startChan); // clear this channel's bit to remove from bias generation
}
WREG(BIAS_SENSN,setting,targetSS); delay(1); //send the modified byte back to the ADS
setting = 0x00;
if(targetSS == BOARD_ADS && boardUseSRB1 == true) setting = 0x20;
if(targetSS == DAISY_ADS && daisyUseSRB1 == true) setting = 0x20;
WREG(MISC1,setting,targetSS); // close all SRB1 swtiches
}
// change the lead off detect settings for all channels
void OpenBCI_32bit_Library::changeChannelLeadOffDetect()
{
byte setting, startChan, endChan, targetSS;
for(int b=0; b<2; b++){
if(b == 0){ targetSS = BOARD_ADS; startChan = 0; endChan = 8; }
if(b == 1){
if(!daisyPresent){ return; }
targetSS = DAISY_ADS; startChan = 8; endChan = 16;
}
SDATAC(targetSS); delay(1); // exit Read Data Continuous mode to communicate with ADS
byte P_setting = RREG(LOFF_SENSP,targetSS);
byte N_setting = RREG(LOFF_SENSN,targetSS);
for(int i=startChan; i<endChan; i++){
if(leadOffSettings[i][PCHAN] == ON){
bitSet(P_setting,i-startChan);
}else{
bitClear(P_setting,i-startChan);
}
if(leadOffSettings[i][NCHAN] == ON){
bitSet(N_setting,i-startChan);
}else{
bitClear(N_setting,i-startChan);
}
WREG(LOFF_SENSP,P_setting,targetSS);
WREG(LOFF_SENSN,N_setting,targetSS);
}
}
}
// change the lead off detect settings for specified channel
void OpenBCI_32bit_Library::changeChannelLeadOffDetect(byte N)
{
byte setting, targetSS, startChan, endChan;
if(N < 9){
targetSS = BOARD_ADS; startChan = 0; endChan = 8;
}else{
if(!daisyPresent) { return; }
targetSS = DAISY_ADS; startChan = 8; endChan = 16;
}
N = constrain(N-1,startChan,endChan-1);
SDATAC(targetSS); delay(1); // exit Read Data Continuous mode to communicate with ADS
byte P_setting = RREG(LOFF_SENSP,targetSS);
byte N_setting = RREG(LOFF_SENSN,targetSS);
if(leadOffSettings[N][PCHAN] == ON){
bitSet(P_setting,N-startChan);
}else{
bitClear(P_setting,N-startChan);
}
if(leadOffSettings[N][NCHAN] == ON){
bitSet(N_setting,N-startChan);
}else{
bitClear(N_setting,N-startChan);
}
WREG(LOFF_SENSP,P_setting,targetSS);
WREG(LOFF_SENSN,N_setting,targetSS);
}
void OpenBCI_32bit_Library::configureLeadOffDetection(byte amplitudeCode, byte freqCode)
{
amplitudeCode &= 0b00001100; //only these two bits should be used
freqCode &= 0b00000011; //only these two bits should be used
byte setting, targetSS;
for(int i=0; i<2; i++){
if(i == 0){ targetSS = BOARD_ADS; }
if(i == 1){
if(!daisyPresent){ return; }
targetSS = DAISY_ADS;
}
setting = RREG(LOFF,targetSS); //get the current bias settings
//reconfigure the byte to get what we want
setting &= 0b11110000; //clear out the last four bits
setting |= amplitudeCode; //set the amplitude
setting |= freqCode; //set the frequency
//send the config byte back to the hardware
WREG(LOFF,setting,targetSS); delay(1); //send the modified byte back to the ADS
}
}
// // deactivate the given channel.
// void OpenBCI_32bit_Library::deactivateChannel(byte N)
// {
// byte setting, startChan, endChan, targetSS;
// if(N < 9){
// targetSS = BOARD_ADS; startChan = 0; endChan = 8;
// }else{
// if(!daisyPresent) { return; }
// targetSS = DAISY_ADS; startChan = 8; endChan = 16;
// }
// SDATAC(targetSS); delay(1); // exit Read Data Continuous mode to communicate with ADS
// N = constrain(N-1,startChan,endChan-1); //subtracts 1 so that we're counting from 0, not 1
//
// setting = RREG(CH1SET+(N-startChan),targetSS); delay(1); // get the current channel settings
// bitSet(setting,7); // set bit7 to shut down channel
// bitClear(setting,3); // clear bit3 to disclude from SRB2 if used
// WREG(CH1SET+(N-startChan),setting,targetSS); delay(1); // write the new value to disable the channel
//
// //remove the channel from the bias generation...
// setting = RREG(BIAS_SENSP,targetSS); delay(1); //get the current bias settings
// bitClear(setting,N-startChan); //clear this channel's bit to remove from bias generation
// WREG(BIAS_SENSP,setting,targetSS); delay(1); //send the modified byte back to the ADS
//
// setting = RREG(BIAS_SENSN,targetSS); delay(1); //get the current bias settings
// bitClear(setting,N-startChan); //clear this channel's bit to remove from bias generation
// WREG(BIAS_SENSN,setting,targetSS); delay(1); //send the modified byte back to the ADS
//
// leadOffSettings[N][PCHAN] = leadOffSettings[N][NCHAN] = NO;
// leadOffSetForChannel(N+1, NO, NO);
// }
// void OpenBCI_32bit_Library::activateChannel(byte N)
// {
// byte setting, startChan, endChan, targetSS;
// if(N < 9){
// targetSS = BOARD_ADS; startChan = 0; endChan = 8;
// }else{
// if(!daisyPresent) { return; }
// targetSS = DAISY_ADS; startChan = 8; endChan = 16;
// }
// N = constrain(N-1,startChan,endChan-1); // 0-7 or 8-15
// SDATAC(targetSS); // exit Read Data Continuous mode to communicate with ADS
// setting = 0x00;
// // channelSettings[N][POWER_DOWN] = NO; // keep track of channel on/off in this array REMOVE?
// setting |= channelSettings[N][GAIN_SET]; // gain
// setting |= channelSettings[N][INPUT_TYPE_SET]; // input code
// if(useSRB2[N] == true){channelSettings[N][SRB2_SET] = YES;}else{channelSettings[N][SRB2_SET] = NO;}
// if(channelSettings[N][SRB2_SET] == YES) {bitSet(setting,3);} // close this SRB2 switch
// WREG(CH1SET+(N-startChan),setting,targetSS);
// // add or remove from inclusion in BIAS generation
// if(useInBias[N]){channelSettings[N][BIAS_SET] = YES;}else{channelSettings[N][BIAS_SET] = NO;}
// setting = RREG(BIAS_SENSP,targetSS); //get the current P bias settings
// if(channelSettings[N][BIAS_SET] == YES){
// bitSet(setting,N-startChan); //set this channel's bit to add it to the bias generation
// useInBias[N] = true;
// }else{
// bitClear(setting,N-startChan); // clear this channel's bit to remove from bias generation
// useInBias[N] = false;
// }
// WREG(BIAS_SENSP,setting,targetSS); delay(1); //send the modified byte back to the ADS
// setting = RREG(BIAS_SENSN,targetSS); //get the current N bias settings
// if(channelSettings[N][BIAS_SET] == YES){
// bitSet(setting,N-startChan); //set this channel's bit to add it to the bias generation
// }else{
// bitClear(setting,N-startChan); // clear this channel's bit to remove from bias generation
// }
// WREG(BIAS_SENSN,setting,targetSS); delay(1); //send the modified byte back to the ADS
// setting = 0x00;
// if(targetSS == BOARD_ADS && boardUseSRB1 == true) setting = 0x20;
// if(targetSS == DAISY_ADS && daisyUseSRB1 == true) setting = 0x20;
// WREG(MISC1,setting,targetSS); // close all SRB1 swtiches
// }
//////////////////////////////////////////////
///////////// LEAD OFF METHODS ///////////////
//////////////////////////////////////////////
/**
* @description Runs through the `leadOffSettings` global array to set/change
* the lead off signals for all inputs of all channels.
* @author AJ Keller (@pushtheworldllc)
*/
// void OpenBCI_32bit_Library::leadOffSetForAllChannels(void) {
// byte channelNumberUpperLimit;
// // The upper limit of the channels, either 8 or 16
// channelNumberUpperLimit = daisyPresent ? OPENBCI_NUMBER_OF_CHANNELS_DAISY : OPENBCI_NUMBER_OF_CHANNELS_DEFAULT;
// // Loop through all channels
// for (int i = 1; i <= channelNumberUpperLimit; i++) {
// leadOffSetForChannel((byte)i,leadOffSettings[i-1][PCHAN],leadOffSettings[i-1][NCHAN]);
// }
// }
/**
* @description Used to set lead off for a channel
* @param `channelNumber` - [byte] - The channel you want to change
* @param `pInput` - [byte] - Apply signal to P input, either ON (1) or OFF (0)
* @param `nInput` - [byte] - Apply signal to N input, either ON (1) or OFF (0)
* @author AJ Keller (@pushtheworldllc)
*/
// void OpenBCI_32bit_Library::leadOffSetForChannel(byte channelNumber, byte pInput, byte nInput) {
// // contstrain the channel number to 0-15
// channelNumber = getConstrainedChannelNumber(channelNumber);
// // Get the slave select pin for this channel
// byte targetSS = getTargetSSForConstrainedChannelNumber(channelNumber);
// // exit Read Data Continuous mode to communicate with ADS
// SDATAC(targetSS);
// delay(1);
// // Read P register
// byte P_setting = RREG(LOFF_SENSP,targetSS);
// // Read N register
// byte N_setting = RREG(LOFF_SENSN,targetSS);
// // Since we are addressing 8 bit registers, we need to subtract 8 from the
// // channelNumber if we are addressing the Daisy ADS
// if (targetSS == DAISY_ADS) {
// channelNumber -= OPENBCI_NUMBER_OF_CHANNELS_DEFAULT;
// }
// // If pInput is ON then we want to set, otherwise we want to clear
// if (pInput == ON) {
// bitSet(P_setting, channelNumber);
// } else {
// bitClear(P_setting, channelNumber);
// }
// // Write to the P register
// WREG(LOFF_SENSP,P_setting,targetSS);
// // If nInput is ON then we want to set, otherwise we want to clear
// if (nInput == ON) {
// bitSet(N_setting, channelNumber);
// } else {
// bitClear(N_setting, channelNumber);
// }
// // Write to the N register
// WREG(LOFF_SENSN,N_setting,targetSS);
// }
/**
* @description This sets the LOFF register on the Board ADS and the Daisy ADS
* @param `amplitudeCode` - [byte] - The amplitude of the of impedance signal.
* See `.setleadOffForSS()` for complete description
* @param `freqCode` - [byte] - The frequency of the impedance signal can be either.
* See `.setleadOffForSS()` for complete description
* @author AJ Keller (@pushtheworldllc)
*/
// void OpenBCI_32bit_Library::leadOffConfigureSignalForAll(byte amplitudeCode, byte freqCode)
// {
// // Set the lead off detection for the on board ADS
// leadOffConfigureSignalForTargetSS(BOARD_ADS, amplitudeCode, freqCode);
// // if the daisy board is present, set that register as well
// if (daisyPresent) {
// leadOffConfigureSignalForTargetSS(DAISY_ADS, amplitudeCode, freqCode);
// }
// }
/**
* @description This sets the LOFF (lead off) register for the given ADS with slave
* select
* @param `targetSS` - [byte] - The Slave Select pin.
* @param `amplitudeCode` - [byte] - The amplitude of the of impedance signal.
* LOFF_MAG_6NA (0b00000000)
* LOFF_MAG_24NA (0b00000100)
* LOFF_MAG_6UA (0b00001000)
* LOFF_MAG_24UA (0b00001100)
* @param `freqCode` - [byte] - The frequency of the impedance signal can be either.
* LOFF_FREQ_DC (0b00000000)
* LOFF_FREQ_7p8HZ (0b00000001)
* LOFF_FREQ_31p2HZ (0b00000010)
* LOFF_FREQ_FS_4 (0b00000011)
* @author Joel/Leif/Conor (@OpenBCI) Summer 2014
*/
// void OpenBCI_32bit_Library::leadOffConfigureSignalForTargetSS(byte targetSS, byte amplitudeCode, byte freqCode) {
// byte setting;
// amplitudeCode &= 0b00001100; //only these two bits should be used
// freqCode &= 0b00000011; //only these two bits should be used
// setting = RREG(LOFF,targetSS); //get the current bias settings
// //reconfigure the byte to get what we want
// setting &= 0b11110000; //clear out the last four bits
// setting |= amplitudeCode; //set the amplitude
// setting |= freqCode; //set the frequency
// //send the config byte back to the hardware
// WREG(LOFF,setting,targetSS); delay(1); //send the modified byte back to the ADS
// }
//Configure the test signals that can be inernally generated by the ADS1299
void OpenBCI_32bit_Library::configureInternalTestSignal(byte amplitudeCode, byte freqCode)
{
byte setting, targetSS;
for(int i=0; i<2; i++){
if(i == 0){ targetSS = BOARD_ADS;}
if(i == 1){
if(daisyPresent == false){ return; }
targetSS = DAISY_ADS;
}
if (amplitudeCode == ADSTESTSIG_NOCHANGE) amplitudeCode = (RREG(CONFIG2,targetSS) & (0b00000100));
if (freqCode == ADSTESTSIG_NOCHANGE) freqCode = (RREG(CONFIG2,targetSS) & (0b00000011));
freqCode &= 0b00000011; //only the last two bits are used
amplitudeCode &= 0b00000100; //only this bit is used
byte setting = 0b11010000 | freqCode | amplitudeCode; //compose the code
WREG(CONFIG2,setting,targetSS); delay(1);
if (curBoardMode == BOARD_MODE_DEBUG) {
Serial1.print("Wrote to CONFIG2: ");
Serial1.print(setting,BIN);
}
}
}
void OpenBCI_32bit_Library::changeInputType(byte inputCode){
for(int i=0; i<numChannels; i++){
channelSettings[i][INPUT_TYPE_SET] = inputCode;
}
// OLD CODE REVERT
//channelSettingsArraySetForAll();
writeChannelSettings();
}
// Start continuous data acquisition
void OpenBCI_32bit_Library::startADS(void) // NEEDS ADS ADDRESS, OR BOTH?
{
sampleCounter = 0;
firstDataPacket = true;
RDATAC(BOTH_ADS); // enter Read Data Continuous mode
delay(1);
START(BOTH_ADS); // start the data acquisition
delay(1);
isRunning = true;
}
/**
* @description Check status register to see if data is available from the ADS1299.
* @returns {boolean} - `true` if data is available
*/
boolean OpenBCI_32bit_Library::isADSDataAvailable(void) {
return (!(digitalRead(ADS_DRDY)));
}
// CALLED WHEN DRDY PIN IS ASSERTED. NEW ADS DATA AVAILABLE!
void OpenBCI_32bit_Library::updateChannelData(){
// this needs to be reset, or else it will constantly flag us
channelDataAvailable = false;
lastSampleTime = millis();
boolean downsample = true;
if (iSerial0.tx == false && iSerial1.baudRate > OPENBCI_BAUD_RATE_MIN_NO_AVG) {
downsample = false;
}
updateBoardData(downsample);
if(daisyPresent) {updateDaisyData(downsample);}
switch (curBoardMode) {
case BOARD_MODE_ANALOG:
auxData[0] = analogRead(A5);
auxData[1] = analogRead(A6);
#ifdef USE_WIFI
if (!wifi.present) {
auxData[2] = analogRead(A7);
}
#else
auxData[2] = analogRead(A7);
#endif
break;
case BOARD_MODE_DIGITAL:
auxData[0] = digitalRead(11) << 8 | digitalRead(12);
#ifdef USE_WIFI
auxData[1] = (wifi.present ? 0 : digitalRead(13) << 8) | digitalRead(17);
auxData[2] = wifi.present ? 0 : digitalRead(18);
#else
auxData[1] = (digitalRead(13) << 8) | digitalRead(17);
auxData[2] = digitalRead(18);
#endif
break;
case BOARD_MODE_DEBUG:
case BOARD_MODE_DEFAULT:
break;
}
}
void OpenBCI_32bit_Library::updateBoardData(void){
updateBoardData(true);
}
void OpenBCI_32bit_Library::updateBoardData(boolean downsample){
byte inByte;
int byteCounter = 0;
if(daisyPresent && !firstDataPacket && downsample){
for(int i=0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){ // shift and average the byte arrays
lastBoardChannelDataInt[i] = boardChannelDataInt[i]; // remember the last samples
}
}
csLow(BOARD_ADS); // open SPI
for(int i=0; i<3; i++){
inByte = xfer(0x00); // read status register (1100 + LOFF_STATP + LOFF_STATN + GPIO[7:4])
boardStat = (boardStat << 8) | inByte;
}
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){
for(int j = 0; j < OPENBCI_ADS_BYTES_PER_CHAN; j++){ // read 24 bits of channel data in 8 3 byte chunks
inByte = xfer(0x00);
boardChannelDataRaw[byteCounter] = inByte; // raw data goes here
byteCounter++;
boardChannelDataInt[i] = (boardChannelDataInt[i]<<8) | inByte; // int data goes here
}
}
csHigh(BOARD_ADS); // close SPI
// need to convert 24bit to 32bit if using the filter
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){ // convert 3 byte 2's compliment to 4 byte 2's compliment
if(bitRead(boardChannelDataInt[i],23) == 1){
boardChannelDataInt[i] |= 0xFF000000;
} else{
boardChannelDataInt[i] &= 0x00FFFFFF;
}
}
if(daisyPresent && !firstDataPacket && downsample){
byteCounter = 0;
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){ // take the average of this and the last sample
meanBoardChannelDataInt[i] = (lastBoardChannelDataInt[i] + boardChannelDataInt[i])/2;
}
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){ // place the average values in the meanRaw array
for(int b=2; b>=0; b--){
meanBoardDataRaw[byteCounter] = (meanBoardChannelDataInt[i] >> (b*8)) & 0xFF;
byteCounter++;
}
}
}
if(firstDataPacket == true){
firstDataPacket = false;
}
}
/**
* @description Read from the Daisy's ADS1299 chip and fill the core arrays with
* new data. Defaults to downsampling if the daisy is present.
* @author AJ Keller (@aj-ptw)
*/
void OpenBCI_32bit_Library::updateDaisyData(void){
updateDaisyData(true);
}
/**
* @description Read from the Daisy's ADS1299 chip and fill the core arrays with
* new data.
* @param `downsample` {boolean} - Averages the last sample with the current to
* cut the sample rate in half.
* @author AJ Keller (@aj-ptw)
*/
void OpenBCI_32bit_Library::updateDaisyData(boolean downsample){
byte inByte;
int byteCounter = 0;
if(daisyPresent && !firstDataPacket && downsample){
for(int i=0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){ // shift and average the byte arrays
lastDaisyChannelDataInt[i] = daisyChannelDataInt[i]; // remember the last samples
}
}
// Open SPI
csLow(DAISY_ADS);
// Read status register (1100 + LOFF_STATP + LOFF_STATN + GPIO[7:4])
// TODO: Do we really need to read this status register ever time?
for(int i = 0; i < 3; i++){
inByte = xfer(0x00);
daisyStat = (daisyStat << 8) | inByte;
}
// Read 24 bits of channel data in 8 3 byte chunks
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){
for(int j = 0; j < OPENBCI_ADS_BYTES_PER_CHAN; j++){
inByte = xfer(0x00);
daisyChannelDataRaw[byteCounter] = inByte; // raw data goes here
byteCounter++;
daisyChannelDataInt[i] = (daisyChannelDataInt[i]<<8) | inByte; // int data goes here
}
}
// Close SPI
csHigh(DAISY_ADS);
// Convert 24bit to 32bit
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){
// Convert 3 byte 2's compliment to 4 byte 2's compliment
if(bitRead(daisyChannelDataInt[i],23) == 1){
daisyChannelDataInt[i] |= 0xFF000000;
}else{
daisyChannelDataInt[i] &= 0x00FFFFFF;
}
}
if(daisyPresent && !firstDataPacket && downsample){
byteCounter = 0;
// Average this sample with the last sample
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){
meanDaisyChannelDataInt[i] = (lastDaisyChannelDataInt[i] + daisyChannelDataInt[i])/2;
}
// Place the average values in the meanRaw array
for(int i = 0; i < OPENBCI_ADS_CHANS_PER_BOARD; i++){
for(int b = 2; b >= 0; b--){
meanDaisyDataRaw[byteCounter] = (meanDaisyChannelDataInt[i] >> (b*8)) & 0xFF;
byteCounter++;
}
}
}
if(firstDataPacket == true) {
firstDataPacket = false;
}
}
// Stop the continuous data acquisition
void OpenBCI_32bit_Library::stopADS()
{
STOP(BOTH_ADS); // stop the data acquisition
delay(1);
SDATAC(BOTH_ADS); // stop Read Data Continuous mode to communicate with ADS
delay(1);
isRunning = false;
}
void OpenBCI_32bit_Library::printSerial(int i) {
if (iSerial0.tx) {
Serial0.print(i);
}
if (iSerial1.tx) {
Serial1.print(i);
}
}
void OpenBCI_32bit_Library::printSerial(char c) {
if (iSerial0.tx) {
Serial0.print(c);
}
if (iSerial1.tx) {
Serial1.print(c);
}
}
void OpenBCI_32bit_Library::printSerial(int c, int arg) {
if (iSerial0.tx) {
Serial0.print(c, arg);
}
if (iSerial1.tx) {
Serial1.print(c, arg);
}
}
void OpenBCI_32bit_Library::printSerial(const char *c) {
if (c != NULL) {
for (int i = 0; i < strlen(c); i++) {
printSerial(c[i]);
}
}
}
void OpenBCI_32bit_Library::printlnSerial(void) {
printSerial("\n");
}
void OpenBCI_32bit_Library::printlnSerial(char c) {
printSerial(c);
printlnSerial();
}
void OpenBCI_32bit_Library::printlnSerial(int c) {
printSerial(c);
printlnSerial();
}
void OpenBCI_32bit_Library::printlnSerial(int c, int arg) {
printSerial(c, arg);
printlnSerial();
}
void OpenBCI_32bit_Library::printlnSerial(const char *c) {
printSerial(c);
printlnSerial();
}
void OpenBCI_32bit_Library::write(uint8_t b) {
#ifdef USE_WIFI
wifi.storeByteBufTx(b);
#endif
writeSerial(b);
}
void OpenBCI_32bit_Library::writeSerial(uint8_t c) {
if (iSerial0.tx) {
Serial0.write(c);
}
if (iSerial1.tx) {
Serial1.write(c);
}
}
void OpenBCI_32bit_Library::ADS_writeChannelData() {
ADS_writeChannelDataAvgDaisy();
ADS_writeChannelDataNoAvgDaisy();
}
// #ifdef USE_WIFI
void OpenBCI_32bit_Library::ADS_writeChannelDataWifi(boolean daisy) {
if (daisy) {
// Send daisy
for(int i = 0; i < 24; i++) {
wifi.storeByteBufTx(daisyChannelDataRaw[i]);
}
} else {
// Send on board
for(int i = 0; i < 24; i++) {
wifi.storeByteBufTx(boardChannelDataRaw[i]);
}
}
}
// #endif
void OpenBCI_32bit_Library::ADS_writeChannelDataAvgDaisy() {
if (iSerial0.tx || (iSerial1.tx && iSerial1.baudRate <= OPENBCI_BAUD_RATE_MIN_NO_AVG)) {
if (daisyPresent) {
// Code that runs with daisy present
if(sampleCounter % 2 != 0) { //CHECK SAMPLE ODD-EVEN AND SEND THE APPROPRIATE ADS DATA
for(int i = 0; i < OPENBCI_NUMBER_BYTES_PER_ADS_SAMPLE; i++) {
writeSerial(meanBoardDataRaw[i]);
}
} else {
for(int i = 0; i < OPENBCI_NUMBER_BYTES_PER_ADS_SAMPLE; i++) {
writeSerial(meanDaisyDataRaw[i]);
}
}
// Code that runs without the daisy present
} else {
for(int i = 0; i < 24; i++) {
writeSerial(boardChannelDataRaw[i]);
}
}
}
}
void OpenBCI_32bit_Library::ADS_writeChannelDataNoAvgDaisy() {
if (iSerial1.tx && iSerial1.baudRate > OPENBCI_BAUD_RATE_MIN_NO_AVG) {
// Don't run this function if the serial baud rate is not greater then the
// minimum
// Always write board ADS data
for(int i = 0; i < OPENBCI_NUMBER_BYTES_PER_ADS_SAMPLE; i++) {
writeSerial(boardChannelDataRaw[i]);
}
// Only write daisy data if present
if (daisyPresent) {
for(int i = 0; i < OPENBCI_NUMBER_BYTES_PER_ADS_SAMPLE; i++) {
writeSerial(daisyChannelDataRaw[i]);
}
}
}
}
//print out the state of all the control registers
void OpenBCI_32bit_Library::printADSregisters(int targetSS)
{
boolean prevverbosityState = verbosity;
verbosity = true; // set up for verbosity output
RREGS(0x00,0x0C,targetSS); // read out the first registers
delay(10); // stall to let all that data get read by the PC
RREGS(0x0D,0x17-0x0D,targetSS); // read out the rest
verbosity = prevverbosityState;
}
byte OpenBCI_32bit_Library::ADS_getDeviceID(int targetSS) { // simple hello world com check
byte data = RREG(ID_REG,targetSS);
if(verbosity){ // verbosity otuput
Serial0.print("On Board ADS ID ");
printHex(data); Serial0.println();
sendEOT();
}
return data;
}
//System Commands
void OpenBCI_32bit_Library::WAKEUP(int targetSS) {
csLow(targetSS);
xfer(_WAKEUP);
csHigh(targetSS);
delayMicroseconds(3); //must wait 4 tCLK cycles before sending another command (Datasheet, pg. 35)
}
void OpenBCI_32bit_Library::STANDBY(int targetSS) { // only allowed to send WAKEUP after sending STANDBY
csLow(targetSS);
xfer(_STANDBY);
csHigh(targetSS);
}
void OpenBCI_32bit_Library::RESET(int targetSS) { // reset all the registers to default settings
csLow(targetSS);
xfer(_RESET);
delayMicroseconds(12); //must wait 18 tCLK cycles to execute this command (Datasheet, pg. 35)
csHigh(targetSS);
}
void OpenBCI_32bit_Library::START(int targetSS) { //start data conversion
csLow(targetSS);
xfer(_START); // KEEP ON-BOARD AND ON-DAISY IN SYNC
csHigh(targetSS);
}
void OpenBCI_32bit_Library::STOP(int targetSS) { //stop data conversion
csLow(targetSS);
xfer(_STOP); // KEEP ON-BOARD AND ON-DAISY IN SYNC
csHigh(targetSS);
}
void OpenBCI_32bit_Library::RDATAC(int targetSS) {
csLow(targetSS);
xfer(_RDATAC); // read data continuous
csHigh(targetSS);
delayMicroseconds(3);
}
void OpenBCI_32bit_Library::SDATAC(int targetSS) {
csLow(targetSS);
xfer(_SDATAC);
csHigh(targetSS);
delayMicroseconds(10); //must wait at least 4 tCLK cycles after executing this command (Datasheet, pg. 37)
}
// THIS NEEDS CLEANING AND UPDATING TO THE NEW FORMAT
void OpenBCI_32bit_Library::RDATA(int targetSS) { // use in Stop Read Continuous mode when DRDY goes low
byte inByte; // to read in one sample of the channels
csLow(targetSS); // open SPI
xfer(_RDATA); // send the RDATA command
for(int i=0; i<3; i++){ // read in the status register and new channel data
inByte = xfer(0x00);
boardStat = (boardStat<<8) | inByte; // read status register (1100 + LOFF_STATP + LOFF_STATN + GPIO[7:4])
}
if(targetSS == BOARD_ADS){
for(int i = 0; i<8; i++){
for(int j=0; j<3; j++){ // read in the new channel data
inByte = xfer(0x00);
boardChannelDataInt[i] = (boardChannelDataInt[i]<<8) | inByte;
}
}
for(int i=0; i<8; i++){
if(bitRead(boardChannelDataInt[i],23) == 1){ // convert 3 byte 2's compliment to 4 byte 2's compliment
boardChannelDataInt[i] |= 0xFF000000;
}else{
boardChannelDataInt[i] &= 0x00FFFFFF;
}
}
}else{
for(int i = 0; i<8; i++){
for(int j=0; j<3; j++){ // read in the new channel data
inByte = xfer(0x00);
daisyChannelDataInt[i] = (daisyChannelDataInt[i]<<8) | inByte;
}
}
for(int i=0; i<8; i++){
if(bitRead(daisyChannelDataInt[i],23) == 1){ // convert 3 byte 2's compliment to 4 byte 2's compliment
daisyChannelDataInt[i] |= 0xFF000000;
}else{
daisyChannelDataInt[i] &= 0x00FFFFFF;
}
}
}
csHigh(targetSS); // close SPI
}
byte OpenBCI_32bit_Library::RREG(byte _address,int targetSS) { // reads ONE register at _address
byte opcode1 = _address + 0x20; // RREG expects 001rrrrr where rrrrr = _address
csLow(targetSS); // open SPI
xfer(opcode1); // opcode1
xfer(0x00); // opcode2
regData[_address] = xfer(0x00);// update mirror location with returned byte
csHigh(targetSS); // close SPI
if (verbosity){ // verbosity output
printRegisterName(_address);
printHex(_address);
Serial0.print(", ");
printHex(regData[_address]);
Serial0.print(", ");
for(byte j = 0; j<8; j++){
Serial0.print(bitRead(regData[_address], 7-j));
if(j!=7) Serial0.print(", ");
}
Serial0.println();
}
return regData[_address]; // return requested register value
}
// Read more than one register starting at _address
void OpenBCI_32bit_Library::RREGS(byte _address, byte _numRegistersMinusOne, int targetSS) {
byte opcode1 = _address + 0x20; // RREG expects 001rrrrr where rrrrr = _address
csLow(targetSS); // open SPI
xfer(opcode1); // opcode1
xfer(_numRegistersMinusOne); // opcode2
for(int i = 0; i <= _numRegistersMinusOne; i++){
regData[_address + i] = xfer(0x00); // add register byte to mirror array
}
csHigh(targetSS); // close SPI
if(verbosity){ // verbosity output
for(int i = 0; i<= _numRegistersMinusOne; i++){
printRegisterName(_address + i);
printHex(_address + i);
Serial0.print(", ");
printHex(regData[_address + i]);
Serial0.print(", ");
for(int j = 0; j<8; j++){
Serial0.print(bitRead(regData[_address + i], 7-j));
if(j!=7) Serial0.print(", ");
}
Serial0.println();
delay(30);
}
}
}
void OpenBCI_32bit_Library::WREG(byte _address, byte _value, int target_SS) { // Write ONE register at _address
byte opcode1 = _address + 0x40; // WREG expects 010rrrrr where rrrrr = _address
csLow(target_SS); // open SPI
xfer(opcode1); // Send WREG command & address
xfer(0x00); // Send number of registers to read -1
xfer(_value); // Write the value to the register
csHigh(target_SS); // close SPI
regData[_address] = _value; // update the mirror array
if(verbosity){ // verbosity output
Serial0.print("Register ");
printHex(_address);
Serial0.println(" modified.");
sendEOT();
}
}
void OpenBCI_32bit_Library::WREGS(byte _address, byte _numRegistersMinusOne, int targetSS) {
byte opcode1 = _address + 0x40; // WREG expects 010rrrrr where rrrrr = _address
csLow(targetSS); // open SPI
xfer(opcode1); // Send WREG command & address
xfer(_numRegistersMinusOne); // Send number of registers to read -1
for (int i=_address; i <=(_address + _numRegistersMinusOne); i++){
xfer(regData[i]); // Write to the registers
}
csHigh(targetSS);
if(verbosity){
Serial0.print("Registers ");
printHex(_address); Serial0.print(" to ");
printHex(_address + _numRegistersMinusOne);
Serial0.println(" modified");
sendEOT();
}
}
// <<<<<<<<<<<<<<<<<<<<<<<<< END OF ADS1299 FUNCTIONS >>>>>>>>>>>>>>>>>>>>>>>>>
// ******************************************************************************
// <<<<<<<<<<<<<<<<<<<<<<<<< LIS3DH FUNCTIONS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
void OpenBCI_32bit_Library::initialize_accel(byte g){
byte setting = g | 0x08; // mask the g range for REG4
pinMode(LIS3DH_DRDY,INPUT); // setup dataReady interupt from accelerometer
LIS3DH_write(TMP_CFG_REG, 0x00); // DISable ADC inputs, enable temperature sensor
LIS3DH_write(CTRL_REG1, 0x08); // disable accel, low power mode
LIS3DH_write(CTRL_REG2, 0x00); // don't use the high pass filter
LIS3DH_write(CTRL_REG3, 0x00); // no interrupts yet
LIS3DH_write(CTRL_REG4, setting); // set scale to g, high resolution
LIS3DH_write(CTRL_REG5, 0x00); // no boot, no fifo
LIS3DH_write(CTRL_REG6, 0x00);
LIS3DH_write(REFERENCE, 0x00);
DRDYpinValue = lastDRDYpinValue = digitalRead(LIS3DH_DRDY); // take a reading to seed these variables
}
void OpenBCI_32bit_Library::enable_accel(byte Hz){
for(int i=0; i<3; i++){
axisData[i] = 0; // clear the axisData array so we don't get any stale news
}
byte setting = Hz | 0x07; // mask the desired frequency
LIS3DH_write(CTRL_REG1, setting); // set freq and enable all axis in normal mode
LIS3DH_write(CTRL_REG3, 0x10); // enable DRDY1 on INT1 (tied to PIC pin 0, LIS3DH_DRDY)
}
void OpenBCI_32bit_Library::disable_accel(){
LIS3DH_write(CTRL_REG1, 0x08); // power down, low power mode
LIS3DH_write(CTRL_REG3, 0x00); // disable DRDY1 on INT1
}
byte OpenBCI_32bit_Library::LIS3DH_getDeviceID(){
return LIS3DH_read(WHO_AM_I);
}
boolean OpenBCI_32bit_Library::LIS3DH_DataAvailable(){
boolean x = false;
if((LIS3DH_read(STATUS_REG2) & 0x08) > 0) x = true; // read STATUS_REG
return x;
}
boolean OpenBCI_32bit_Library::LIS3DH_DataReady(){
boolean r = false;
DRDYpinValue = digitalRead(LIS3DH_DRDY); // take a look at LIS3DH_DRDY pin
if(DRDYpinValue != lastDRDYpinValue){ // if the value has changed since last looking
if(DRDYpinValue == HIGH){ // see if this is the rising edge
r = true; // if so, there is fresh data!
}
lastDRDYpinValue = DRDYpinValue; // keep track of the changing pin
}
return r;
}
void OpenBCI_32bit_Library::LIS3DH_writeAxisDataSerial(void){
for(int i = 0; i < 3; i++){
writeSerial(highByte(axisData[i])); // write 16 bit axis data MSB first
writeSerial(lowByte(axisData[i])); // axisData is array of type short (16bit)
}
}
void OpenBCI_32bit_Library::LIS3DH_writeAxisDataForAxisSerial(uint8_t axis) {
if (axis > 2) axis = 0;
writeSerial(highByte(axisData[axis])); // write 16 bit axis data MSB first
writeSerial(lowByte(axisData[axis])); // axisData is array of type short (16bit)
}
// #ifdef USE_WIFI
void OpenBCI_32bit_Library::LIS3DH_writeAxisDataWifi(void){
for(int i = 0; i < 3; i++){
wifi.storeByteBufTx(highByte(axisData[i])); // write 16 bit axis data MSB first
wifi.storeByteBufTx(lowByte(axisData[i])); // axisData is array of type short (16bit)
}
}
void OpenBCI_32bit_Library::LIS3DH_writeAxisDataForAxisWifi(uint8_t axis) {
if (axis > 2) axis = 0;
wifi.storeByteBufTx(highByte(axisData[axis])); // write 16 bit axis data MSB first
wifi.storeByteBufTx(lowByte(axisData[axis])); // axisData is array of type short (16bit)
}
// #endif
void OpenBCI_32bit_Library::LIS3DH_zeroAxisData(void){
for(int i = 0; i < 3; i++){
axisData[i] = 0;
}
}
byte OpenBCI_32bit_Library::LIS3DH_read(byte reg){
reg |= READ_REG; // add the READ_REG bit
csLow(LIS3DH_SS); // take spi
spi.transfer(reg); // send reg to read
byte inByte = spi.transfer(0x00); // retrieve data
csHigh(LIS3DH_SS); // release spi
return inByte;
}
void OpenBCI_32bit_Library::LIS3DH_write(byte reg, byte value){
csLow(LIS3DH_SS); // take spi
spi.transfer(reg); // send reg to write
spi.transfer(value); // write value
csHigh(LIS3DH_SS); // release spi
}
int OpenBCI_32bit_Library::LIS3DH_read16(byte reg){ // use for reading axis data.
int inData;
reg |= READ_REG | READ_MULTI; // add the READ_REG and READ_MULTI bits
csLow(LIS3DH_SS); // take spi
spi.transfer(reg); // send reg to start reading from
inData = spi.transfer(0x00) | (spi.transfer(0x00) << 8); // get the data and arrange it
csHigh(LIS3DH_SS); // release spi
return inData;
}
int OpenBCI_32bit_Library::getX(){
return LIS3DH_read16(OUT_X_L);
}
int OpenBCI_32bit_Library::getY(){
return LIS3DH_read16(OUT_Y_L);
}
int OpenBCI_32bit_Library::getZ(){
return LIS3DH_read16(OUT_Z_L);
}
void OpenBCI_32bit_Library::LIS3DH_updateAxisData(){
axisData[0] = getX();
axisData[1] = getY();
axisData[2] = getZ();
}
void OpenBCI_32bit_Library::LIS3DH_readAllRegs(){
byte inByte;
for (int i = STATUS_REG_AUX; i <= WHO_AM_I; i++){
inByte = LIS3DH_read(i);
Serial0.print("0x0");Serial0.print(i,HEX);
Serial0.print("\t");Serial0.println(inByte,HEX);
delay(20);
}
Serial0.println();
for (int i = TMP_CFG_REG; i <= INT1_DURATION; i++){
inByte = LIS3DH_read(i);
// printRegisterName(i);
Serial0.print("0x");Serial0.print(i,HEX);
Serial0.print("\t");Serial0.println(inByte,HEX);
delay(20);
}
Serial0.println();
for (int i = CLICK_CFG; i <= TIME_WINDOW; i++){
inByte = LIS3DH_read(i);
Serial0.print("0x");Serial0.print(i,HEX);
Serial0.print("\t");Serial0.println(inByte,HEX);
delay(20);
}
}
// <<<<<<<<<<<<<<<<<<<<<<<<< END OF LIS3DH FUNCTIONS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
// String-Byte converters for ADS
void OpenBCI_32bit_Library::printRegisterName(byte _address) {
switch(_address){
case ID_REG:
printAll("ADS_ID, "); break;
case CONFIG1:
printAll("CONFIG1, "); break;
case CONFIG2:
printAll("CONFIG2, "); break;
case CONFIG3:
printAll("CONFIG3, "); break;
case LOFF:
printAll("LOFF, "); break;
case CH1SET:
printAll("CH1SET, "); break;
case CH2SET:
printAll("CH2SET, "); break;
case CH3SET:
printAll("CH3SET, "); break;
case CH4SET:
printAll("CH4SET, "); break;
case CH5SET:
printAll("CH5SET, "); break;
case CH6SET:
printAll("CH6SET, "); break;
case CH7SET:
printAll("CH7SET, "); break;
case CH8SET:
printAll("CH8SET, "); break;
case BIAS_SENSP:
printAll("BIAS_SENSP, "); break;
case BIAS_SENSN:
printAll("BIAS_SENSN, "); break;
case LOFF_SENSP:
printAll("LOFF_SENSP, "); break;
case LOFF_SENSN:
printAll("LOFF_SENSN, "); break;
case LOFF_FLIP:
printAll("LOFF_FLIP, "); break;
case LOFF_STATP:
printAll("LOFF_STATP, "); break;
case LOFF_STATN:
printAll("LOFF_STATN, "); break;
case GPIO:
printAll("GPIO, "); break;
case MISC1:
printAll("MISC1, "); break;
case MISC2:
printAll("MISC2, "); break;
case CONFIG4:
printAll("CONFIG4, "); break;
default:
break;
}
}
// Used for printing HEX in verbosity feedback mode
void OpenBCI_32bit_Library::printHex(byte _data){
Serial0.print("0x");
if(_data < 0x10) Serial0.print("0");
Serial0.print(_data, HEX);
}
void OpenBCI_32bit_Library::printFailure() {
printAll("Failure: ");
}
void OpenBCI_32bit_Library::printSuccess() {
printAll("Success: ");
}
void OpenBCI_32bit_Library::printAll(const char *arr) {
printSerial(arr);
// #ifdef USE_WIFI
wifi.sendStringMulti(arr);
// #endif
}
void OpenBCI_32bit_Library::printlnAll(const char *arr) {
printlnSerial(arr);
// #ifdef USE_WIFI
wifi.sendStringLast(arr);
// #endif
}
/**
* @description Converts ascii character to byte value for channel setting bytes
* @param `asciiChar` - [char] - The ascii character to convert
* @return [char] - Byte number value of acsii character, defaults to 0
* @author AJ Keller (@pushtheworldllc)
*/
char OpenBCI_32bit_Library::getChannelCommandForAsciiChar(char asciiChar) {
switch(asciiChar){
case OPENBCI_CHANNEL_CMD_CHANNEL_1:
return 0x00;
case OPENBCI_CHANNEL_CMD_CHANNEL_2:
return 0x01;
case OPENBCI_CHANNEL_CMD_CHANNEL_3:
return 0x02;
case OPENBCI_CHANNEL_CMD_CHANNEL_4:
return 0x03;
case OPENBCI_CHANNEL_CMD_CHANNEL_5:
return 0x04;
case OPENBCI_CHANNEL_CMD_CHANNEL_6:
return 0x05;
case OPENBCI_CHANNEL_CMD_CHANNEL_7:
return 0x06;
case OPENBCI_CHANNEL_CMD_CHANNEL_8:
return 0x07;
case OPENBCI_CHANNEL_CMD_CHANNEL_9:
return 0x08;
case OPENBCI_CHANNEL_CMD_CHANNEL_10:
return 0x09;
case OPENBCI_CHANNEL_CMD_CHANNEL_11:
return 0x0A;
case OPENBCI_CHANNEL_CMD_CHANNEL_12:
return 0x0B;
case OPENBCI_CHANNEL_CMD_CHANNEL_13:
return 0x0C;
case OPENBCI_CHANNEL_CMD_CHANNEL_14:
return 0x0D;
case OPENBCI_CHANNEL_CMD_CHANNEL_15:
return 0x0E;
case OPENBCI_CHANNEL_CMD_CHANNEL_16:
return 0x0F;
default:
return 0x00;
}
}
/**
* @description Converts ascii '0' to number 0 and ascii '1' to number 1
* @param `asciiChar` - [char] - The ascii character to convert
* @return [char] - Byte number value of acsii character, defaults to 0
* @author AJ Keller (@pushtheworldllc)
*/
char OpenBCI_32bit_Library::getYesOrNoForAsciiChar(char asciiChar) {
switch (asciiChar) {
case '1':
return ACTIVATE;
case '0':
default:
return DEACTIVATE;
}
}
/**
* @description Converts ascii character to get gain from channel settings
* @param `asciiChar` - [char] - The ascii character to convert
* @return [char] - Byte number value of acsii character, defaults to 0
* @author AJ Keller (@pushtheworldllc)
*/
char OpenBCI_32bit_Library::getGainForAsciiChar(char asciiChar) {
char output = 0x00;
if (asciiChar < '0' || asciiChar > '6') {
asciiChar = '6'; // Default to 24
}
output = asciiChar - '0';
return output << 4;
}
/**
* @description Converts ascii character to get gain from channel settings
* @param `asciiChar` - [char] - The ascii character to convert
* @return [char] - Byte number value of acsii character, defaults to 0
* @author AJ Keller (@pushtheworldllc)
*/
char OpenBCI_32bit_Library::getNumberForAsciiChar(char asciiChar) {
if (asciiChar < '0' || asciiChar > '9') {
asciiChar = '0';
}
// Convert ascii char to number
asciiChar -= '0';
return asciiChar;
}
/**
* @description Used to set the channelSettings array to default settings
* @param `setting` - [byte] - The byte you need a setting for....
* @returns - [byte] - Retuns the proper byte for the input setting, defualts to 0
*/
byte OpenBCI_32bit_Library::getDefaultChannelSettingForSetting(byte setting) {
switch (setting) {
case POWER_DOWN:
return NO;
case GAIN_SET:
return ADS_GAIN24;
case INPUT_TYPE_SET:
return ADSINPUT_NORMAL;
case BIAS_SET:
return YES;
case SRB2_SET:
return YES;
case SRB1_SET:
default:
return NO;
}
}
/**
* @description Used to set the channelSettings array to default settings
* @param `setting` - [byte] - The byte you need a setting for....
* @returns - [char] - Retuns the proper ascii char for the input setting, defaults to '0'
*/
char OpenBCI_32bit_Library::getDefaultChannelSettingForSettingAscii(byte setting) {
switch (setting) {
case GAIN_SET: // Special case where GAIN_SET needs to be shifted first
return (ADS_GAIN24 >> 4) + '0';
default: // All other settings are just adding the ascii value for '0'
return getDefaultChannelSettingForSetting(setting) + '0';
}
}
/**
* @description Convert user channelNumber for use in array indexs by subtracting 1,
* also make sure N is not greater than 15 or less than 0
* @param `channelNumber` - [byte] - The channel number
* @return [byte] - Constrained channel number
*/
char OpenBCI_32bit_Library::getConstrainedChannelNumber(byte channelNumber) {
return constrain(channelNumber - 1, 0, OPENBCI_NUMBER_OF_CHANNELS_DAISY - 1);
}
/**
* @description Get slave select pin for channelNumber
* @param `channelNumber` - [byte] - The channel number
* @return [byte] - Constrained channel number
*/
char OpenBCI_32bit_Library::getTargetSSForConstrainedChannelNumber(byte channelNumber) {
// Is channelNumber in the range of default [0,7]
if (channelNumber < OPENBCI_NUMBER_OF_CHANNELS_DEFAULT) {
return BOARD_ADS;
} else {
return DAISY_ADS;
}
}
/**
* @description Used to set the channelSettings array to default settings
* @param `channelSettingsArray` - [byte **] - Takes a two dimensional array of
* length OPENBCI_NUMBER_OF_CHANNELS_DAISY by 6 elements
*/
void OpenBCI_32bit_Library::resetChannelSettingsArrayToDefault(byte channelSettingsArray[][OPENBCI_NUMBER_OF_CHANNEL_SETTINGS]) {
// Loop through all channels
for (int i = 0; i < OPENBCI_NUMBER_OF_CHANNELS_DAISY; i++) {
channelSettingsArray[i][POWER_DOWN] = getDefaultChannelSettingForSetting(POWER_DOWN); // on = NO, off = YES
channelSettingsArray[i][GAIN_SET] = getDefaultChannelSettingForSetting(GAIN_SET); // Gain setting
channelSettingsArray[i][INPUT_TYPE_SET] = getDefaultChannelSettingForSetting(INPUT_TYPE_SET); // input muxer setting
channelSettingsArray[i][BIAS_SET] = getDefaultChannelSettingForSetting(BIAS_SET); // add this channel to bias generation
channelSettingsArray[i][SRB2_SET] = getDefaultChannelSettingForSetting(SRB2_SET); // connect this P side to SRB2
channelSettingsArray[i][SRB1_SET] = getDefaultChannelSettingForSetting(SRB1_SET); // don't use SRB1
useInBias[i] = true; // keeping track of Bias Generation
useSRB2[i] = true; // keeping track of SRB2 inclusion
}
boardUseSRB1 = daisyUseSRB1 = false;
}
/**
* @description Used to set the channelSettings array to default settings
* @param `channelSettingsArray` - [byte **] - A two dimensional array of
* length OPENBCI_NUMBER_OF_CHANNELS_DAISY by 2 elements
*/
void OpenBCI_32bit_Library::resetLeadOffArrayToDefault(byte leadOffArray[][OPENBCI_NUMBER_OF_LEAD_OFF_SETTINGS]) {
// Loop through all channels
for (int i = 0; i < OPENBCI_NUMBER_OF_CHANNELS_DAISY; i++) {
leadOffArray[i][PCHAN] = OFF;
leadOffArray[i][NCHAN] = OFF;
}
}
OpenBCI_32bit_Library board;
Referência em uma Nova Issue Ver Git Blame Copiar Link Permanente