Initial commit -- Makefile working if your sketch use only default functions and libraries (like delay and Serial)

Blink.pde

@@ -0,0 +1,14 @@
+//Blink example
+
+#define LED 13
+
+void setup() {
+	pinMode(LED, OUTPUT);
+}
+
+void loop() {
+	digitalWrite(LED, HIGH);
+	delay(1000);
+	digitalWrite(LED, LOW);
+	delay(100);
+}

Makefile

@@ -0,0 +1,83 @@
+###############################################################################
+#                     Makefile for Arduino Duemilanove/Uno                    #
+#                  http://github.com/turicas/arduinoMakefile                  #
+#                                                                             #
+#                     Created by Álvaro Justen aka Turicas                    #
+#             alvarojusten [no-spam_AT_] gmail [_DOT_no-spam] com             #
+#                         http://twitter.com/turicas                          #
+#                                                                             #
+#                               License: GPLv2                                #
+#                   http://www.gnu.org/licenses/gpl-2.0.html                  #
+###############################################################################
+
+#Sketch, board and IDE path configuration (in general change only this section)
+# The sketch filename without .pde (should be in ./)
+SKETCH_NAME=Blink
+# The port Arduino is connected (use /dev/ttyUSB0 for Duemilanove)
+PORT=/dev/ttyACM0
+# The path of Arduino IDE
+ARDUINO_DIR=/home/alvaro/arduino-0022
+# Boardy type: use "arduino" for Uno or "skt500v1" for Duemilanove
+BOARD_TYPE=arduino
+# Baud-rate: use "115200" for Uno or "19200" for Duemilanove
+BAUD_RATE=115200
+
+#Compiler and uploader configuration
+ARDUINO_CORE=$(ARDUINO_DIR)/hardware/arduino/cores/arduino
+INCLUDE=-I. -I$(ARDUINO_DIR)/hardware/arduino/cores/arduino
+TMP_DIR=/tmp/build_arduino
+MCU=atmega328p
+DF_CPU=16000000
+CC=/usr/bin/avr-gcc
+CPP=/usr/bin/avr-g++
+AVR_OBJCOPY=/usr/bin/avr-objcopy 
+AVRDUDE=/usr/bin/avrdude
+CC_FLAGS=-g -Os -w -Wall -ffunction-sections -fdata-sections -fno-exceptions -std=gnu99
+CPP_FLAGS=-g -Os -w -Wall -ffunction-sections -fdata-sections -fno-exceptions
+AVRDUDE_CONF=/etc/avrdude.conf
+
+
+all:		clean compile upload
+
+clean:
+		rm -rf "$(TMP_DIR)"
+
+
+compile:
+		mkdir $(TMP_DIR)
+		echo '#include "WProgram.h"' > "$(TMP_DIR)/$(SKETCH_NAME).cpp"
+		cat $(SKETCH_NAME).pde >> "$(TMP_DIR)/$(SKETCH_NAME).cpp"
+		#$(CPP) -MM -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) "$(TMP_DIR)/$(SKETCH_NAME).cpp" -MF "$(TMP_DIR)/$(SKETCH_NAME).d" -MT "$(TMP_DIR)/$(SKETCH_NAME).o"
+		$(CPP) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) "$(TMP_DIR)/$(SKETCH_NAME).cpp" -o "$(TMP_DIR)/$(SKETCH_NAME).o"
+		
+		#Arduino core .c dependecies:
+		$(CC) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CC_FLAGS) $(ARDUINO_CORE)/pins_arduino.c -o $(TMP_DIR)/pins_arduino.o
+		$(CC) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CC_FLAGS) $(ARDUINO_CORE)/WInterrupts.c -o $(TMP_DIR)/WInterrupts.o
+		$(CC) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CC_FLAGS) $(ARDUINO_CORE)/wiring_analog.c -o $(TMP_DIR)/wiring_analog.o
+		$(CC) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CC_FLAGS) $(ARDUINO_CORE)/wiring.c -o $(TMP_DIR)/wiring.o
+		$(CC) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CC_FLAGS) $(ARDUINO_CORE)/wiring_digital.c -o $(TMP_DIR)/wiring_digital.o
+		$(CC) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CC_FLAGS) $(ARDUINO_CORE)/wiring_pulse.c -o $(TMP_DIR)/wiring_pulse.o
+		$(CC) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CC_FLAGS) $(ARDUINO_CORE)/wiring_shift.c -o $(TMP_DIR)/wiring_shift.o
+
+		#Arduino core .cpp dependecies:
+		$(CPP) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) $(ARDUINO_CORE)/HardwareSerial.cpp -o $(TMP_DIR)/HardwareSerial.o
+		$(CPP) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) $(ARDUINO_CORE)/main.cpp -o $(TMP_DIR)/main.o
+		$(CPP) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) $(ARDUINO_CORE)/Print.cpp -o $(TMP_DIR)/Print.o
+		$(CPP) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) $(ARDUINO_CORE)/Tone.cpp -o $(TMP_DIR)/Tone.o
+		$(CPP) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) $(ARDUINO_CORE)/WMath.cpp -o $(TMP_DIR)/WMath.o
+		$(CPP) -c -mmcu=$(MCU) -DF_CPU=$(DF_CPU) $(INCLUDE) $(CPP_FLAGS) $(ARDUINO_CORE)/WString.cpp -o $(TMP_DIR)/WString.o
+
+		#TODO: compile libraries here
+		#TODO: use .d files to track dependencies and compile them -> change .c by -MM and use -MF to generate .d
+
+		$(CC) -mmcu=$(MCU) -lm -Wl,--gc-sections -Os -o $(TMP_DIR)/$(SKETCH_NAME).elf $(TMP_DIR)/*.o
+		$(AVR_OBJCOPY) -O ihex -R .eeprom $(TMP_DIR)/$(SKETCH_NAME).elf $(TMP_DIR)/$(SKETCH_NAME).hex
+
+reset:
+		stty --file $(PORT) hupcl
+		sleep 0.1
+		stty --file $(PORT) -hupcl
+
+
+upload:
+		$(AVRDUDE) -q -V -p $(MCU) -C $(AVRDUDE_CONF) -c $(BOARD_TYPE) -b $(BAUD_RATE) -P $(PORT) -U flash:w:$(TMP_DIR)/$(SKETCH_NAME).hex:i