bugfix: retraction count max

Contributes to Ultimaker/Uranium#42

.gitignore

@@ -13,4 +13,13 @@ _obj
 .*.swp
 *.gcode
 CuraEngine
+build/*
+*~
+NUL
+CuraEngine.layout
+CuraEngine.cbp
+documentation/html/*
+documentation/latex/*
 
+*kdev*
+*.kate-swp

CMakeLists.txt

@@ -0,0 +1,71 @@
+project(CuraEngine)
+
+cmake_minimum_required(VERSION 2.8.12)
+
+find_package(Arcus REQUIRED)
+
+if(NOT ${CMAKE_VERSION} VERSION_LESS 3.1)
+    set(CMAKE_CXX_STANDARD 11)
+else()
+    set(CMAKE_CXX_FLAGS "-std=c++11")
+endif()
+
+# Add warnings
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
+
+if(NOT APPLE AND NOT WIN32)
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -static-libstdc++")
+elseif(APPLE)
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
+endif()
+
+include_directories(${CMAKE_CURRENT_BINARY_DIR} libs)
+
+add_library(clipper STATIC libs/clipper/clipper.cpp)
+
+set(engine_SRCS
+    src/bridge.cpp
+    src/comb.cpp
+    src/commandSocket.cpp
+    src/gcodeExport.cpp
+    src/gcodePlanner.cpp
+    src/infill.cpp
+    src/inset.cpp
+    src/layerPart.cpp
+    src/main.cpp
+    src/mesh.cpp
+    src/multiVolumes.cpp
+    src/pathOrderOptimizer.cpp
+    src/polygonOptimizer.cpp
+    src/raft.cpp
+    src/settingRegistry.cpp
+    src/settings.cpp
+    src/skin.cpp
+    src/skirt.cpp
+    src/slicer.cpp
+    src/support.cpp
+    src/timeEstimate.cpp
+    src/Weaver.cpp
+    src/Wireframe2gcode.cpp
+
+    src/modelFile/modelFile.cpp
+
+    src/utils/gettime.cpp
+    src/utils/logoutput.cpp
+    src/utils/polygonUtils.cpp
+)
+
+protobuf_generate_cpp(engine_PB_SRCS engine_PB_HEADERS Cura.proto)
+
+add_executable(CuraEngine ${engine_SRCS} ${engine_PB_SRCS})
+target_link_libraries(CuraEngine clipper Arcus)
+
+add_executable(Test src/test.cpp)
+target_link_libraries(Test clipper)
+
+if (UNIX)
+    target_link_libraries(CuraEngine pthread)
+endif()
+
+include(GNUInstallDirs)
+install(TARGETS CuraEngine DESTINATION ${CMAKE_INSTALL_BINDIR})

Cura.proto

@@ -0,0 +1,86 @@
+syntax = "proto3";
+
+package Cura;
+
+// typeid 1
+message ObjectList {
+    repeated Object objects = 1;
+}
+
+message Object {
+    int64 id = 1;
+    bytes vertices = 2; //An array of 3 floats.
+    bytes normals = 3; //An array of 3 floats.
+    bytes indices = 4; //An array of ints.
+    repeated Setting settings = 5; // Setting override per object, overruling the global settings.
+}
+
+// typeid 3
+message Progress {
+    float amount = 1;
+}
+
+// typeid 2
+message SlicedObjectList {
+    repeated SlicedObject objects = 1;
+}
+
+message SlicedObject {
+    int64 id = 1;
+
+    repeated Layer layers = 2;
+}
+
+message Layer {
+    int32 id = 1;
+
+    float height = 2;
+    float thickness = 3;
+
+    repeated Polygon polygons = 4;
+}
+
+message Polygon {
+    enum Type {
+        NoneType = 0;
+        Inset0Type = 1;
+        InsetXType = 2;
+        SkinType = 3;
+        SupportType = 4;
+        SkirtType = 5;
+        InfillType = 6;
+        SupportInfillType = 7;
+    }
+    Type type = 1;
+    bytes points = 2;
+    float line_width = 3;
+}
+
+// typeid 4
+message GCodeLayer {
+    int64 id = 1;
+    bytes data = 2;
+}
+
+// typeid 5
+message ObjectPrintTime {
+    int64 id = 1;
+    float time = 2;
+    float material_amount = 3;
+}
+
+// typeid 6
+message SettingList {
+    repeated Setting settings = 1;
+}
+
+message Setting {
+    string name = 1;
+
+    bytes value = 2;
+}
+
+// typeid 7
+message GCodePrefix {
+    bytes data = 2;
+}

Makefile

@@ -1,53 +0,0 @@
-#
-# Makefile for CuraEngine
-#
-
-# simplest working invocation to compile it
-#g++ main.cpp modelFile/modelFile.cpp clipper/clipper.cpp -o CuraEngine
-
-VERSION ?= DEV
-CXX ?= g++
-CFLAGS += -c -Wall -Wextra -O3 -fomit-frame-pointer -DVERSION=\"$(VERSION)\"
-# also include debug symbols
-#CFLAGS+=-ggdb
-LDFLAGS +=
-SOURCES  = bridge.cpp comb.cpp gcodeExport.cpp infill.cpp inset.cpp layerPart.cpp main.cpp optimizedModel.cpp pathOrderOptimizer.cpp polygonOptimizer.cpp raft.cpp settings.cpp skin.cpp skirt.cpp slicer.cpp support.cpp timeEstimate.cpp
-SOURCES += clipper/clipper.cpp modelFile/modelFile.cpp utils/gettime.cpp utils/logoutput.cpp utils/socket.cpp
-OBJECTS = $(SOURCES:.cpp=.o)
-EXECUTABLE = ./CuraEngine
-UNAME := $(shell uname)
-
-ifeq ($(UNAME), Linux)
-	OPEN_HTML=firefox
-	LDFLAGS += --static
-endif
-ifeq ($(UNAME), Darwin)
-	OPEN_HTML=open
-	#For MacOS force to build
-	CFLAGS += -force_cpusubtype_ALL -mmacosx-version-min=10.6 -arch x86_64 -arch i386
-	LDFLAGS += -force_cpusubtype_ALL -mmacosx-version-min=10.6 -arch x86_64 -arch i386
-endif
-ifeq ($(UNAME), MINGW32_NT-6.1)
-	#For windows make it large address aware, which allows the process to use more then 2GB of memory.
-	EXECUTABLE := $(EXECUTABLE).exe
-	CFLAGS += -march=pentium4
-	LDFLAGS += -Wl,--large-address-aware -lm -lwsock32
-endif
-
-all: $(SOURCES) $(EXECUTABLE)
-
-$(EXECUTABLE): $(OBJECTS)
-	$(CXX) $(OBJECTS) -o $@ $(LDFLAGS)
-
-.cpp.o:
-	$(CXX) $(CFLAGS) $< -o $@
-
-test: $(EXECUTABLE)
-	python _tests/runtest.py $(abspath $(EXECUTABLE))
-
-## clean stuff
-clean:
-	rm -f $(EXECUTABLE) $(OBJECTS)
-
-help:
-	@cat Makefile |grep \#\#| grep \: |cut -d\# -f3

README.md

@@ -5,9 +5,9 @@ The CuraEngine is a C++ console application for 3D printing GCode generation. It
 The CuraEngine is pure C++ and uses Clipper from http://www.angusj.com/delphi/clipper.php
 There are no external dependences and Clipper is included in the source code without modifications.
 
-This is just a console application for GCode generation. For a full graphical application look at https://github.com/daid/Cura with is the graphical frontend for CuraEngine.
+This is just a console application for GCode generation. For a full graphical application look at https://github.com/daid/Cura which is the graphical frontend for CuraEngine.
 
-The CuraEngine can be used seperately or in other applications. Feel free to add it to your application. But to take note of the License.
+The CuraEngine can be used seperately or in other applications. Feel free to add it to your application. But please take note of the License.
 
 License
 =======
@@ -16,11 +16,52 @@ Terms of the license can be found in the LICENSE file. Or at http://www.gnu.org/
 
 But in general it boils down to: You need to share the source of any CuraEngine modifications if you make an application with the CuraEngine. (Even if you make a web-based slicer, you still need to share the source!)
 
+How to Install
+==============
+1. Clone the repository from https://github.com/Ultimaker/CuraEngine.git (the URL at the right hand side of this page).
+2. Install Protobuf (see below)
+3. Install libArcus (see https://github.com/Ultimaker/libArcus)
+
+In order to compile CuraEngine, either use CMake or start a project in your preferred IDE. 
+CMake compilation:
+1. Navigate to the CuraEngine directory and execute the following commands
+2. $ mkdir build && cd build
+3. $ cmake ..
+4. $ make
+
+Project files generation:
+1. Navigate to the CuraEngine directory and execute the following commands
+2. cmake . -G "CodeBlocks - Unix Makefiles"
+3. (for a list of supported IDE's see http://www.cmake.org/Wiki/CMake_Generator_Specific_Information#Code::Blocks_Generator)
+
+Installing Protobuf
+-------------------
+1. Be sure to have libtool installed.
+2. Download protobuf from https://github.com/google/protobuf/ (download ZIP and unZIP at desired location, or clone the repo) The protocol buffer is used for communication between the CuraEngine and the GUI.
+3. Before installing protobuf, change autogen.sh : comment line 18 to line 38 using '#'s. This removes the dependency on gtest-1.7.0.
+4. Run autogen.sh from the protobuf directory: 
+   $ ./autogen.sh
+5. $ ./configure
+6. $ make
+7. $ make install     # Requires superused priviliges.
+8. (In case the shared library cannot be loaded, you can try "sudo ldconfig" on Linux systems)
+
+Running
+=======
+Other than running CuraEngine from a frontend, such as PluggableCura, one can run CuraEngine from the command line.
+An example run for an UM2 machine looks as follows:
+* Navigate to the CuraEngine directory and execute the following
+```
+./build/CuraEngine -v -j fdmprinter.json -s machine_start_gcode=";FLAVOR:UltiGCode
+;TIME:10000000
+;MATERIAL:2000
+;MATERIAL2:0" -s mesh_position_x=115.0 -s mesh_position_y=112.5 -s mesh_position_z=0 -s material_diameter=1.128 -o "output/test.gcode" "/path/to/model.stl"
+```
 
 Internals
 =========
 
-The Cura Engine is structured as mainly .h files. This is not standard for an C++ project. However, using less cpp files makes the optimizer work harder and removes linking error issues. It's partialy a result of lazyness but also for optimalizations.
+The Cura Engine is structured as mainly .h files. This is not standard for a C++ project. However, using less cpp files makes the optimizer work harder and removes linking error issues. It's partialy a result of lazyness but comes in handy for optimalizations.
 
 The .h files contain different steps called from the main.cpp file. The main.cpp file contains the global slicing logic.
 
@@ -45,20 +86,20 @@ The OptimizedModel is a 3D model stored with vertex<->face relations. This gives
 
 Slicer
 ======
-While usually the whole GCode generation process is called Slicing. The slicer in the CuraEngine is the piece of code that generates layers. Each layer has closed 2D polygons.
+While usually the whole GCode generation process is called 'slicing', the Slicer in the CuraEngine is the piece of code that generates layers. Each layer contains closed 2D polygons.
 These polygons are generated in a 2 step process. First all triangles are cut into lines per layer, for each layer a "line segment" is added to that layer.
 Next all these line-segments are connected to eachother to make Polygons. The vertex<->face relations of the OptimizedModel help to make this process fast, as there is a huge chance that 2 connecting faces also make 2 connecting line-segments.
-This code also fixes up small holes in the 3D model, so your model doesn't need to be perfect Manifold. It also accounts for incorrect normals, so it can flip around line-segments to fit end-to-end.
+This code also patches up small holes in the 3D model, so your model doesn't need to be a perfect Manifold. It also deals with incorrect normals, so it can flip around line-segments to fit end-to-end.
 
 After the Slicer we have closed Polygons which can be used in Clipper, as Clipper can only opperate on closed 2D polygons.
 
 LayerParts
 ==========
-An important concept to grasp is the LayerParts. LayerParts are seperate parts inside a single layer. For example, if you have a cube. Then each layer has a single LayerPart. However, if you have a table, then the layers which build the legs have a LayerPart per leg, and thus there will be 4 LayerParts.
-A LayerPart is a seperated area inside a single layer which does not touch any other LayerParts. Most operations run on LayerParts as it reduces the amount of data to process. During GCode generation handling each LayerPart as an own step makes sure you never travel between LayerParts and thus reducing the amount of external travel.
+An important concept to grasp is the idea of LayerParts. LayerParts are seperate parts inside a single layer. For example, in a solid cube each layer has a single LayerPart. However, in a table the layers which cover the legs have a LayerPart per leg, and thus there will be 4 LayerParts.
+A LayerPart is a seperated area inside a single layer which does not touch any other LayerParts. Most operations run on LayerParts as it reduces the amount of data to be processed. During GCode generation handling each LayerPart as a separate step makes sure you never travel between LayerParts which reduces the amount of external travel.
 LayerParts are generated after the Slicer step.
 
-To generate the LayerParts Clipper is used. A Clipper union with extended results gives a list of Polygons with holes in them. Each polygon is a LayerPart, and the holes are added to this LayerPart.
+In order to generate the LayerParts, Clipper is used. A Clipper union with extended results gives a list of Polygons with holes in them. Each polygon is a LayerPart, and the holes are added to this LayerPart.
 
 
 Insets
@@ -70,12 +111,12 @@ Up/Down skin
 The skin code generates the fully filled areas, it does this with some heavy boolean Clipper action. The skin step uses data from different layers to get the job done. Check the code for details.
 The sparse infill area code is almost the same as the skin code. With the difference that it keeps the other areas and uses different offsets.
 
-Note that these steps generate the areas, not the actual infill lines. The infill line paths are generated later on. So the result of this step are list of Polygons which are the areas that need to be filled.
+Note that these steps generate the areas, not the actual infill lines. The infill line paths are generated later on. So the result of this step are lists of Polygons which are the areas that need to be filled.
 
 GCode generation
 ================
 The GCode generation is quite a large bit of code. As a lot is going on here. Important bits here are:
 * PathOrderOptimizer: This piece of code needs to solve a TravelingSalesmanProblem. Given a list of polygons/lines it tries to find the best order in which to print them. It currently does this by finding the closest next polygon to print.
 * Infill: This code generates a group of lines from an area. This is the code that generates the actuall infill pattern. There is also a concentric infill function, which is currently not used.
-* Comb: The combing code is the code that tries to avoid holes when moving around the head without printing. This code also detects when it fails. The final GCode generator uses the combing code while generating the final GCode. So they interact closely.
-* GCodeExport: The GCode export is a 2 step process. First it collects all the paths for a layer that it needs to print, this includes all moves, prints, extrusion widths. And then it generates the final GCode. This is the only piece of code that has knowledge about GCode, and to generate a different flavor of GCode it will be the only piece that needs adjustment. All volumatric calculations also happen here.
+* Comb: The combing code is the code that tries to avoid holes when moving the head around without printing. This code also detects when it fails. The final GCode generator uses the combing code while generating the final GCode. So they interact closely.
+* GCodeExport: The GCode export is a 2 step process. First it collects all the paths for a layer that it needs to print, this includes all moves, prints, extrusion widths. And then it generates the final GCode. This is the only piece of code that has knowledge about GCode keywords and syntax;meshmdhfdhfdhf to generate a different flavor of GCode it will be the only piece that needs adjustment. All volumatric calculations also happen here.

_tests/runtest.py

@@ -1,14 +0,0 @@
-#!/usr/bin/python
-
-import sys
-import subprocess
-
-def main(engine):
-	p = subprocess.Popen([engine, '-c', 'supportAngle=60', '-c', 'supportEverywhere=1', '_tests/testModel.stl'], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
-	p.communicate()
-	if p.wait() != 0:
-		print "Engine failed to report success on test object slice..."
-		sys.exit(1)
-
-if __name__ == '__main__':
-	main(sys.argv[1])

documentation/Link_to_index.html

@@ -0,0 +1 @@
+html/index.html

documentation/code_conventions.md

@@ -0,0 +1,126 @@
+Code Conventions
+=======
+Note that the code convention described here have not all yet been fully implemented.
+
+Bracketing and indenting
+-----
+~~~~~~~~~~~~~~~{.cpp}
+if (condition) // brackets always on new lines
+{ // allways a bracket after an if, for, while, etc.
+    // indent always with 4 spaces, never with tabs
+}
+else // else on new line
+{
+    // more code
+}
+~~~~~~~~~~~~~~~
+
+Naming conventions
+------
+ * variables: lower_case_with_underscores
+ * functions: loweCamelCase
+ * classes: UpperCamelCase
+ * macros: UPPER_CASE_WITH_UNDERSCORES
+~~~~~~~~~~~~~~~{.cpp}
+#define UPPER_CASE_MACRO 1
+
+class UpperCamelCase
+{
+private:
+    MemberVariableObject with_underscores;
+public:
+    MemberVariableObject with_underscores;
+
+public:
+    UpperCamelCase();
+    ~UpperCamelCase();
+    
+    // start with input variable(s) and end with output variable(s)
+    void lowerCamelCaseFunctions(ParamObject& also_with_underscores)
+    {
+        LocalObject under_scores;
+    }
+private:
+    void putFunctionsAndVariablesInSeperatePublicPrivateBlocks();
+};
+~~~~~~~~~~~~~~~
+
+Ordering
+----
+~~~~~~~~~~~~~~~{.cpp}
+class Example
+{
+    // start with input variable(s) and end with output parameter(s) 
+    void function1(ParamObject& input_variable, int setting_parameter, ParamObject2& return_parameter)
+    {
+        function2();
+        function3();
+    }
+    
+    // place functions called solely by one other function below it chronologically
+    void function2();
+    
+    void function3();
+};
+~~~~~~~~~~~~~~~
+
+Documentation
+----
+We use [Doxygen](www.doxygen.org/) to generate documentation. Try to keep your documentation in doxygen style.
+
+Here's a small example:
+~~~~~~~~~~~~~~~{.cpp}
+/ *!
+ * Doxygen style comments!
+ *
+ * \param param1 explanation may refer to another \p param2
+ * /
+void function(int param1, int param2)
+{
+    // non-doxygen style comments on implementation details
+}
+
+int member; //!< inline doxygen comment on the entry to the left
+~~~~~~~~~~~~~~~
+
+Files
+--------
+For a file Foo.h (UpperCamelCase):
+~~~~~~~~~~~~~~~{.cpp}
+#ifndef FOO_H
+#define FOO_H
+// [content]
+#endif//FOO_H
+~~~~~~~~~~~~~~~
+
+
+Other
+----
+~~~~~~~~~~~~~~~{.cpp}
+#include <all>
+#include <includes>
+#include <on>
+#include <top>
+
+#include <first_system_includes>
+
+#include <then_library_includes>
+
+#include "finally_local_includes"
+
+enum class EnumExample 
+{
+    ELEM0 = 0,
+    ELEM1 = 1
+}
+~~~~~~~~~~~~~~~
+
+Illegal syntax
+----
+~~~~~~~~~~~~~~~{.cpp}
+void function()
+{
+    if (condition)
+        single_line_outside_code_block(); // always use braces!
+}; // unneccesary semicolon after function definition is not allowed
+~~~~~~~~~~~~~~~

documentation/glossary.md

@@ -0,0 +1,11 @@
+Glossary
+========
+
+
+Term/Synonyms | Meaning
+--- | ---
+Island/Part | isolated/unconnected part in 2D slice
+Inset | perimeter, the perimeters which are laid down around the infill
+Slicing | The act of extracting the contours of the object at a certain height (not the whole process which would also include gcode generation etc.)
+Tower (support) | A strut to reinforce parts of the support which would otherwise be unstable.
+Weaver / Neith / WirePrint | A non-layer-wise form of printing 'in thin air'

documentation/mainpage.md

@@ -0,0 +1,10 @@
+CuraEngine {#mainpage}
+=======
+
+This is the documentation for CuraEngine, the back-end slicer of Cura.
+
+[Overview](documentation/overview.md)
+
+[Glossary](documentation/glossary.md)
+
+[Code Conventions](documentation/code_conventions.md)

documentation/overview.md

@@ -0,0 +1,68 @@
+Overview
+========
+
+Internals
+---------
+
+The Cura Engine is structured as mainly .h files. This is not standard for an C++ project. However, using less cpp files makes the optimizer work harder and removes linking error issues. It's partialy a result of lazyness but also for optimalizations.
+
+The .h files contain different steps called from the main.cpp file. The main.cpp file contains the global slicing logic.
+
+The slicing process follows the following global steps:
+* Load 3D model
+* Analize and fix 3D model
+* Slice 3D model into 2D layers
+* Build LayerParts from sliced layers
+* Generate Insets
+* Generate up/down skins areas
+* Generate sparse infill areas
+* Generate GCode for each layer
+
+Each step has more logic in it. But this is a general overview.
+All data for the engine is stored in the "SliceDataStorage". It's important to remember that only the data from the previous step is valid.
+
+Coordinates are stored in 64bit integers as microns in the code. So if you see a value of 1000 then this mean 1mm of distance. This is because Clipper works on 64bit integers and microns give a high enough resolution without limiting the size too much. Note that there are some bits and pieces of code that need to be careful about 64bit overflows, especially calculating lengths sqrt(x*x+y*y) can cause overflows.
+
+OptimizedModel
+--------------
+The OptimizedModel is a 3D model stored with vertex<->face relations. This gives touching face relations which are used later on to slice into layers faster.
+
+Slicer
+------
+While usually the whole GCode generation process is called Slicing. The slicer in the CuraEngine is the piece of code that generates layers. Each layer has closed 2D polygons.
+These polygons are generated in a 2 step process. First all triangles are cut into lines per layer, for each layer a "line segment" is added to that layer.
+Next all these line-segments are connected to eachother to make Polygons. The vertex<->face relations of the OptimizedModel help to make this process fast, as there is a huge chance that 2 connecting faces also make 2 connecting line-segments.
+This code also fixes up small holes in the 3D model, so your model doesn't need to be perfect Manifold. It also accounts for incorrect normals, so it can flip around line-segments to fit end-to-end.
+
+After the Slicer we have closed Polygons which can be used in Clipper, as Clipper can only opperate on closed 2D polygons.
+
+LayerParts
+----------
+An important concept to grasp is the LayerParts. LayerParts are seperate parts inside a single layer. For example, if you have a cube. Then each layer has a single LayerPart. However, if you have a table, then the layers which build the legs have a LayerPart per leg, and thus there will be 4 LayerParts.
+A LayerPart is a seperated area inside a single layer which does not touch any other LayerParts. Most operations run on LayerParts as it reduces the amount of data to process. During GCode generation handling each LayerPart as an own step makes sure you never travel between LayerParts and thus reducing the amount of external travel.
+LayerParts are generated after the Slicer step.
+
+To generate the LayerParts Clipper is used. A Clipper union with extended results gives a list of Polygons with holes in them. Each polygon is a LayerPart, and the holes are added to this LayerPart.
+
+Polygons
+--------
+Holes are polygons in counter-clockwise (or at-least, in the other direction) and the polygons are guaranteed to be "even-odd", so every crossing of polygon lines will switch from "fill" to "empty".
+
+Insets
+------
+Insets are also called "Perimeters" or "Loops" sometimes. Generating the insets is only a small bit of code, as Clipper does most of the heavy lifting.
+
+Up/Down skin
+------------
+The skin code generates the fully filled areas, it does this with some heavy boolean Clipper action. The skin step uses data from different layers to get the job done. Check the code for details.
+The sparse infill area code is almost the same as the skin code. With the difference that it keeps the other areas and uses different offsets.
+
+Note that these steps generate the areas, not the actual infill lines. The infill line paths are generated later on. So the result of this step are list of Polygons which are the areas that need to be filled.
+
+GCode generation
+----------------
+The GCode generation is quite a large bit of code. As a lot is going on here. Important bits here are:
+* PathOrderOptimizer: This piece of code needs to solve a TravelingSalesmanProblem. Given a list of polygons/lines it tries to find the best order in which to print them. It currently does this by finding the closest next polygon to print.
+* Infill: This code generates a group of lines from an area. This is the code that generates the actuall infill pattern. There is also a concentric infill function, which is currently not used.
+* Comb: The combing code is the code that tries to avoid holes when moving around the head without printing. This code also detects when it fails. The final GCode generator uses the combing code while generating the final GCode. So they interact closely.
+* GCodeExport: The GCode export is a 2 step process. First it collects all the paths for a layer that it needs to print, this includes all moves, prints, extrusion widths. And then it generates the final GCode. This is the only piece of code that has knowledge about GCode, and to generate a different flavor of GCode it will be the only piece that needs adjustment. All volumatric calculations also happen here.

fffProcessor.h

@@ -1,631 +0,0 @@
-#ifndef FFF_PROCESSOR_H
-#define FFF_PROCESSOR_H
-
-#include "utils/socket.h"
-
-#define GUI_CMD_REQUEST_MESH 0x01
-#define GUI_CMD_SEND_POLYGONS 0x02
-#define GUI_CMD_FINISH_OBJECT 0x03
-
-//FusedFilamentFabrication processor.
-class fffProcessor
-{
-private:
-    int maxObjectHeight;
-    int fileNr;
-    GCodeExport gcode;
-    ConfigSettings& config;
-    TimeKeeper timeKeeper;
-    ClientSocket guiSocket;
-
-    GCodePathConfig skirtConfig;
-    GCodePathConfig inset0Config;
-    GCodePathConfig insetXConfig;
-    GCodePathConfig fillConfig;
-    GCodePathConfig supportConfig;
-public:
-    fffProcessor(ConfigSettings& config)
-    : config(config)
-    {
-        fileNr = 1;
-        maxObjectHeight = 0;
-    }
-
-    void guiConnect(int portNr)
-    {
-        guiSocket.connectTo("127.0.0.1", portNr);
-    }
-
-    void sendPolygonsToGui(const char* name, int layerNr, int32_t z, Polygons& polygons)
-    {
-        guiSocket.sendNr(GUI_CMD_SEND_POLYGONS);
-        guiSocket.sendNr(polygons.size());
-        guiSocket.sendNr(layerNr);
-        guiSocket.sendNr(z);
-        guiSocket.sendNr(strlen(name));
-        guiSocket.sendAll(name, strlen(name));
-        for(unsigned int n=0; n<polygons.size(); n++)
-        {
-            PolygonRef polygon = polygons[n];
-            guiSocket.sendNr(polygon.size());
-            guiSocket.sendAll(polygon.data(), polygon.size() * sizeof(Point));
-        }
-    }
-
-    bool setTargetFile(const char* filename)
-    {
-        gcode.setFilename(filename);
-        if (gcode.isOpened())
-            gcode.writeComment("Generated with Cura_SteamEngine %s", VERSION);
-        return gcode.isOpened();
-    }
-
-    bool processFile(const char* input_filename)
-    {
-        if (!gcode.isOpened())
-            return false;
-
-        TimeKeeper timeKeeperTotal;
-        SliceDataStorage storage;
-        preSetup();
-        if (!prepareModel(storage, input_filename))
-            return false;
-
-        processSliceData(storage);
-        writeGCode(storage);
-
-        logProgress("process", 1, 1);//Report the GUI that a file has been fully processed.
-        log("Total time elapsed %5.2fs.\n", timeKeeperTotal.restart());
-        guiSocket.sendNr(GUI_CMD_FINISH_OBJECT);
-
-        return true;
-    }
-
-    void finalize()
-    {
-        if (!gcode.isOpened())
-            return;
-        gcode.finalize(maxObjectHeight, config.moveSpeed, config.endCode.c_str());
-    }
-
-private:
-    void preSetup()
-    {
-        skirtConfig.setData(config.printSpeed, config.extrusionWidth, "SKIRT");
-        inset0Config.setData(config.inset0Speed, config.extrusionWidth, "WALL-OUTER");
-        insetXConfig.setData(config.insetXSpeed, config.extrusionWidth, "WALL-INNER");
-        fillConfig.setData(config.infillSpeed, config.extrusionWidth, "FILL");
-        supportConfig.setData(config.printSpeed, config.extrusionWidth, "SUPPORT");
-
-        for(unsigned int n=1; n<MAX_EXTRUDERS;n++)
-            gcode.setExtruderOffset(n, config.extruderOffset[n].p());
-        gcode.setFlavor(config.gcodeFlavor);
-        gcode.setRetractionSettings(config.retractionAmount, config.retractionSpeed, config.retractionAmountExtruderSwitch, config.minimalExtrusionBeforeRetraction, config.retractionZHop);
-    }
-
-    bool prepareModel(SliceDataStorage& storage, const char* input_filename)
-    {
-        timeKeeper.restart();
-        SimpleModel* model = NULL;
-        if (input_filename[0] == '$')
-        {
-            model = new SimpleModel();
-            for(unsigned int n=0; input_filename[n]; n++)
-            {
-                model->volumes.push_back(SimpleVolume());
-                SimpleVolume* volume = &model->volumes[model->volumes.size()-1];
-                guiSocket.sendNr(GUI_CMD_REQUEST_MESH);
-
-                int32_t vertexCount = guiSocket.recvNr();
-                int pNr = 0;
-                log("Reading mesh from socket with %i vertexes\n", vertexCount);
-                Point3 v[3];
-                while(vertexCount)
-                {
-                    float f[3];
-                    guiSocket.recvAll(f, 3 * sizeof(float));
-                    FPoint3 fp(f[0], f[1], f[2]);
-                    v[pNr++] = config.matrix.apply(fp);
-                    if (pNr == 3)
-                    {
-                        volume->addFace(v[0], v[1], v[2]);
-                        pNr = 0;
-                    }
-                    vertexCount--;
-                }
-            }
-        }else{
-            log("Loading %s from disk...\n", input_filename);
-            model = loadModelFromFile(input_filename, config.matrix);
-        }
-        if (!model)
-        {
-            logError("Failed to load model: %s\n", input_filename);
-            return false;
-        }
-        log("Loaded from disk in %5.3fs\n", timeKeeper.restart());
-        log("Analyzing and optimizing model...\n");
-        OptimizedModel* optimizedModel = new OptimizedModel(model, Point3(config.objectPosition.X, config.objectPosition.Y, -config.objectSink));
-        for(unsigned int v = 0; v < model->volumes.size(); v++)
-        {
-            log("  Face counts: %i -> %i %0.1f%%\n", (int)model->volumes[v].faces.size(), (int)optimizedModel->volumes[v].faces.size(), float(optimizedModel->volumes[v].faces.size()) / float(model->volumes[v].faces.size()) * 100);
-            log("  Vertex counts: %i -> %i %0.1f%%\n", (int)model->volumes[v].faces.size() * 3, (int)optimizedModel->volumes[v].points.size(), float(optimizedModel->volumes[v].points.size()) / float(model->volumes[v].faces.size() * 3) * 100);
-            log("  Size: %f %f %f\n", INT2MM(optimizedModel->modelSize.x), INT2MM(optimizedModel->modelSize.y), INT2MM(optimizedModel->modelSize.z));
-            log("  vMin: %f %f %f\n", INT2MM(optimizedModel->vMin.x), INT2MM(optimizedModel->vMin.y), INT2MM(optimizedModel->vMin.z));
-            log("  vMax: %f %f %f\n", INT2MM(optimizedModel->vMax.x), INT2MM(optimizedModel->vMax.y), INT2MM(optimizedModel->vMax.z));
-            log("  vMin: %f %f %f\n", INT2MM(model->min().x), INT2MM(model->min().y), INT2MM(model->min().z));
-            log("  vMax: %f %f %f\n", INT2MM(model->max().x), INT2MM(model->max().y), INT2MM(model->max().z));
-            log("  Matrix: %f %f %f\n", config.matrix.m[0][0], config.matrix.m[1][0], config.matrix.m[2][0]);
-            log("  Matrix: %f %f %f\n", config.matrix.m[0][1], config.matrix.m[1][1], config.matrix.m[2][1]);
-            log("  Matrix: %f %f %f\n", config.matrix.m[0][2], config.matrix.m[1][2], config.matrix.m[2][2]);
-            if (INT2MM(optimizedModel->modelSize.x) > 10000.0 || INT2MM(optimizedModel->modelSize.y)  > 10000.0 || INT2MM(optimizedModel->modelSize.z) > 10000.0)
-            {
-                logError("Object is way to big, CuraEngine bug?");
-                exit(1);
-            }
-        }
-        delete model;
-        log("Optimize model %5.3fs \n", timeKeeper.restart());
-        //om->saveDebugSTL("c:\\models\\output.stl");
-
-        log("Slicing model...\n");
-        vector<Slicer*> slicerList;
-        for(unsigned int volumeIdx=0; volumeIdx < optimizedModel->volumes.size(); volumeIdx++)
-        {
-            Slicer* slicer = new Slicer(&optimizedModel->volumes[volumeIdx], config.initialLayerThickness - config.layerThickness / 2, config.layerThickness, config.fixHorrible & FIX_HORRIBLE_KEEP_NONE_CLOSED, config.fixHorrible & FIX_HORRIBLE_EXTENSIVE_STITCHING);
-            slicerList.push_back(slicer);
-            for(unsigned int layerNr=0; layerNr<slicer->layers.size(); layerNr++)
-            {
-                //Reporting the outline here slows down the engine quite a bit, so only do so when debugging.
-                //sendPolygonsToGui("outline", layerNr, slicer->layers[layerNr].z, slicer->layers[layerNr].polygonList);
-                sendPolygonsToGui("openoutline", layerNr, slicer->layers[layerNr].z, slicer->layers[layerNr].openPolygonList);
-            }
-        }
-        log("Sliced model in %5.3fs\n", timeKeeper.restart());
-
-        log("Generating support map...\n");
-        generateSupportGrid(storage.support, optimizedModel, config.supportAngle, config.supportEverywhere > 0, config.supportXYDistance, config.supportZDistance);
-
-        storage.modelSize = optimizedModel->modelSize;
-        storage.modelMin = optimizedModel->vMin;
-        storage.modelMax = optimizedModel->vMax;
-        delete optimizedModel;
-
-        log("Generating layer parts...\n");
-        for(unsigned int volumeIdx=0; volumeIdx < slicerList.size(); volumeIdx++)
-        {
-            storage.volumes.push_back(SliceVolumeStorage());
-            createLayerParts(storage.volumes[volumeIdx], slicerList[volumeIdx], config.fixHorrible & (FIX_HORRIBLE_UNION_ALL_TYPE_A | FIX_HORRIBLE_UNION_ALL_TYPE_B | FIX_HORRIBLE_UNION_ALL_TYPE_C));
-            delete slicerList[volumeIdx];
-            
-            //Add the raft offset to each layer.
-            for(unsigned int layerNr=0; layerNr<storage.volumes[volumeIdx].layers.size(); layerNr++)
-                storage.volumes[volumeIdx].layers[layerNr].printZ += config.raftBaseThickness + config.raftInterfaceThickness;
-        }
-        log("Generated layer parts in %5.3fs\n", timeKeeper.restart());
-        return true;
-    }
-
-    void processSliceData(SliceDataStorage& storage)
-    {
-        //carveMultipleVolumes(storage.volumes);
-        generateMultipleVolumesOverlap(storage.volumes, config.multiVolumeOverlap);
-        //dumpLayerparts(storage, "c:/models/output.html");
-
-        const unsigned int totalLayers = storage.volumes[0].layers.size();
-        for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
-        {
-            for(unsigned int volumeIdx=0; volumeIdx<storage.volumes.size(); volumeIdx++)
-            {
-                int insetCount = config.insetCount;
-                if (config.spiralizeMode && int(layerNr) < config.downSkinCount && layerNr % 2 == 1)//Add extra insets every 2 layers when spiralizing, this makes bottoms of cups watertight.
-                    insetCount += 5;
-                SliceLayer* layer = &storage.volumes[volumeIdx].layers[layerNr];
-                generateInsets(layer, config.extrusionWidth, insetCount);
-
-                for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
-                {
-                    if (layer->parts[partNr].insets.size() > 0)
-                    {
-                        sendPolygonsToGui("inset0", layerNr, layer->printZ, layer->parts[partNr].insets[0]);
-                        for(unsigned int inset=1; inset<layer->parts[partNr].insets.size(); inset++)
-                            sendPolygonsToGui("insetx", layerNr, layer->printZ, layer->parts[partNr].insets[inset]);
-                    }
-                }
-            }
-            logProgress("inset",layerNr+1,totalLayers);
-        }
-        if (config.enableOozeShield)
-        {
-            for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
-            {
-                Polygons oozeShield;
-                for(unsigned int volumeIdx=0; volumeIdx<storage.volumes.size(); volumeIdx++)
-                {
-                    for(unsigned int partNr=0; partNr<storage.volumes[volumeIdx].layers[layerNr].parts.size(); partNr++)
-                    {
-                        oozeShield = oozeShield.unionPolygons(storage.volumes[volumeIdx].layers[layerNr].parts[partNr].outline.offset(MM2INT(2.0)));
-                    }
-                }
-                storage.oozeShield.push_back(oozeShield);
-            }
-
-            for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
-                storage.oozeShield[layerNr] = storage.oozeShield[layerNr].offset(-MM2INT(1.0)).offset(MM2INT(1.0));
-            int offsetAngle = tan(60.0*M_PI/180) * config.layerThickness;//Allow for a 60deg angle in the oozeShield.
-            for(unsigned int layerNr=1; layerNr<totalLayers; layerNr++)
-                storage.oozeShield[layerNr] = storage.oozeShield[layerNr].unionPolygons(storage.oozeShield[layerNr-1].offset(-offsetAngle));
-            for(unsigned int layerNr=totalLayers-1; layerNr>0; layerNr--)
-                storage.oozeShield[layerNr-1] = storage.oozeShield[layerNr-1].unionPolygons(storage.oozeShield[layerNr].offset(-offsetAngle));
-        }
-        log("Generated inset in %5.3fs\n", timeKeeper.restart());
-
-        for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
-        {
-            if (!config.spiralizeMode || int(layerNr) < config.downSkinCount)    //Only generate up/downskin and infill for the first X layers when spiralize is choosen.
-            {
-                for(unsigned int volumeIdx=0; volumeIdx<storage.volumes.size(); volumeIdx++)
-                {
-                    generateSkins(layerNr, storage.volumes[volumeIdx], config.extrusionWidth, config.downSkinCount, config.upSkinCount, config.infillOverlap);
-                    generateSparse(layerNr, storage.volumes[volumeIdx], config.extrusionWidth, config.downSkinCount, config.upSkinCount);
-
-                    SliceLayer* layer = &storage.volumes[volumeIdx].layers[layerNr];
-                    for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
-                        sendPolygonsToGui("skin", layerNr, layer->printZ, layer->parts[partNr].skinOutline);
-                }
-            }
-            logProgress("skin",layerNr+1,totalLayers);
-        }
-        log("Generated up/down skin in %5.3fs\n", timeKeeper.restart());
-
-        if (config.wipeTowerSize > 0)
-        {
-            PolygonRef p = storage.wipeTower.newPoly();
-            p.add(Point(storage.modelMin.x - 3000, storage.modelMax.y + 3000));
-            p.add(Point(storage.modelMin.x - 3000, storage.modelMax.y + 3000 + config.wipeTowerSize));
-            p.add(Point(storage.modelMin.x - 3000 - config.wipeTowerSize, storage.modelMax.y + 3000 + config.wipeTowerSize));
-            p.add(Point(storage.modelMin.x - 3000 - config.wipeTowerSize, storage.modelMax.y + 3000));
-
-            storage.wipePoint = Point(storage.modelMin.x - 3000 - config.wipeTowerSize / 2, storage.modelMax.y + 3000 + config.wipeTowerSize / 2);
-        }
-
-        generateSkirt(storage, config.skirtDistance, config.extrusionWidth, config.skirtLineCount, config.skirtMinLength, config.initialLayerThickness);
-        generateRaft(storage, config.raftMargin);
-
-        sendPolygonsToGui("skirt", 0, config.initialLayerThickness, storage.skirt);
-
-        for(unsigned int volumeIdx=0; volumeIdx<storage.volumes.size(); volumeIdx++)
-        {
-            for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
-            {
-                for(unsigned int partNr=0; partNr<storage.volumes[volumeIdx].layers[layerNr].parts.size(); partNr++)
-                {
-                    if (layerNr > 0)
-                        storage.volumes[volumeIdx].layers[layerNr].parts[partNr].bridgeAngle = bridgeAngle(&storage.volumes[volumeIdx].layers[layerNr].parts[partNr], &storage.volumes[volumeIdx].layers[layerNr-1]);
-                    else
-                        storage.volumes[volumeIdx].layers[layerNr].parts[partNr].bridgeAngle = -1;
-                }
-            }
-        }
-    }
-
-    void writeGCode(SliceDataStorage& storage)
-    {
-        if (fileNr == 1)
-        {
-            if (gcode.getFlavor() == GCODE_FLAVOR_ULTIGCODE)
-            {
-                gcode.writeCode(";FLAVOR:UltiGCode");
-                gcode.writeCode(";TIME:<__TIME__>");
-                gcode.writeCode(";MATERIAL:<FILAMENT>");
-                gcode.writeCode(";MATERIAL2:<FILAMEN2>");
-            }
-            gcode.writeCode(config.startCode.c_str());
-        }else{
-            gcode.writeFanCommand(0);
-            gcode.resetExtrusionValue();
-            gcode.writeRetraction();
-            gcode.setZ(maxObjectHeight + 5000);
-            gcode.writeMove(gcode.getPositionXY(), config.moveSpeed, 0);
-            gcode.writeMove(Point(storage.modelMin.x, storage.modelMin.y), config.moveSpeed, 0);
-        }
-        fileNr++;
-
-        unsigned int totalLayers = storage.volumes[0].layers.size();
-        gcode.writeComment("Layer count: %d", totalLayers);
-
-        if (config.raftBaseThickness > 0 && config.raftInterfaceThickness > 0)
-        {
-            sendPolygonsToGui("support", 0, config.raftBaseThickness, storage.raftOutline);
-            sendPolygonsToGui("support", 0, config.raftBaseThickness + config.raftInterfaceThickness, storage.raftOutline);
-            
-            GCodePathConfig raftBaseConfig(config.initialLayerSpeed, config.raftBaseLinewidth, "SUPPORT");
-            GCodePathConfig raftInterfaceConfig(config.initialLayerSpeed, config.raftInterfaceLinewidth, "SUPPORT");
-            {
-                gcode.writeComment("LAYER:-2");
-                gcode.writeComment("RAFT");
-                GCodePlanner gcodeLayer(gcode, config.moveSpeed, config.retractionMinimalDistance);
-                if (config.supportExtruder > 0)
-                    gcodeLayer.setExtruder(config.supportExtruder);
-                gcodeLayer.setAlwaysRetract(true);
-                gcode.setZ(config.raftBaseThickness);
-                gcode.setExtrusion(config.raftBaseThickness, config.filamentDiameter, config.filamentFlow);
-                gcodeLayer.addPolygonsByOptimizer(storage.raftOutline, &raftBaseConfig);
-
-                Polygons raftLines;
-                generateLineInfill(storage.raftOutline, raftLines, config.raftBaseLinewidth, config.raftLineSpacing, config.infillOverlap, 0);
-                gcodeLayer.addPolygonsByOptimizer(raftLines, &raftBaseConfig);
-
-                gcodeLayer.writeGCode(false, config.raftBaseThickness);
-            }
-
-            {
-                gcode.writeComment("LAYER:-1");
-                gcode.writeComment("RAFT");
-                GCodePlanner gcodeLayer(gcode, config.moveSpeed, config.retractionMinimalDistance);
-                gcodeLayer.setAlwaysRetract(true);
-                gcode.setZ(config.raftBaseThickness + config.raftInterfaceThickness);
-                gcode.setExtrusion(config.raftInterfaceThickness, config.filamentDiameter, config.filamentFlow);
-
-                Polygons raftLines;
-                generateLineInfill(storage.raftOutline, raftLines, config.raftInterfaceLinewidth, config.raftLineSpacing, config.infillOverlap, 90);
-                gcodeLayer.addPolygonsByOptimizer(raftLines, &raftInterfaceConfig);
-
-                gcodeLayer.writeGCode(false, config.raftInterfaceThickness);
-            }
-        }
-
-        int volumeIdx = 0;
-        for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
-        {
-            logProgress("export", layerNr+1, totalLayers);
-
-            if (int(layerNr) < config.initialSpeedupLayers)
-            {
-                int n = config.initialSpeedupLayers;
-                skirtConfig.setData(config.printSpeed * layerNr / n + config.initialLayerSpeed * (n - layerNr) / n, config.extrusionWidth, "SKIRT");
-                inset0Config.setData(config.inset0Speed * layerNr / n + config.initialLayerSpeed * (n - layerNr) / n, config.extrusionWidth, "WALL-OUTER");
-                insetXConfig.setData(config.insetXSpeed * layerNr / n + config.initialLayerSpeed * (n - layerNr) / n, config.extrusionWidth, "WALL-INNER");
-                fillConfig.setData(config.infillSpeed * layerNr / n + config.initialLayerSpeed * (n - layerNr) / n, config.extrusionWidth, "FILL");
-                supportConfig.setData(config.printSpeed * layerNr / n + config.initialLayerSpeed * (n - layerNr) / n, config.extrusionWidth, "SUPPORT");
-            }else{
-                skirtConfig.setData(config.printSpeed, config.extrusionWidth, "SKIRT");
-                inset0Config.setData(config.inset0Speed, config.extrusionWidth, "WALL-OUTER");
-                insetXConfig.setData(config.insetXSpeed, config.extrusionWidth, "WALL-INNER");
-                fillConfig.setData(config.infillSpeed, config.extrusionWidth, "FILL");
-                supportConfig.setData(config.printSpeed, config.extrusionWidth, "SUPPORT");
-            }
-
-            gcode.writeComment("LAYER:%d", layerNr);
-            if (layerNr == 0)
-                gcode.setExtrusion(config.initialLayerThickness, config.filamentDiameter, config.filamentFlow);
-            else
-                gcode.setExtrusion(config.layerThickness, config.filamentDiameter, config.filamentFlow);
-
-            GCodePlanner gcodeLayer(gcode, config.moveSpeed, config.retractionMinimalDistance);
-            int32_t z = config.initialLayerThickness + layerNr * config.layerThickness;
-            z += config.raftBaseThickness + config.raftInterfaceThickness;
-            gcode.setZ(z);
-
-            bool printSupportFirst = (storage.support.generated && config.supportExtruder > 0 && config.supportExtruder == gcodeLayer.getExtruder());
-            if (printSupportFirst)
-                addSupportToGCode(storage, gcodeLayer, layerNr);
-
-            for(unsigned int volumeCnt = 0; volumeCnt < storage.volumes.size(); volumeCnt++)
-            {
-                if (volumeCnt > 0)
-                    volumeIdx = (volumeIdx + 1) % storage.volumes.size();
-                addVolumeLayerToGCode(storage, gcodeLayer, volumeIdx, layerNr);
-            }
-            if (!printSupportFirst)
-                addSupportToGCode(storage, gcodeLayer, layerNr);
-
-            //Finish the layer by applying speed corrections for minimal layer times
-            gcodeLayer.forceMinimalLayerTime(config.minimalLayerTime, config.minimalFeedrate);
-
-            int fanSpeed = config.fanSpeedMin;
-            if (gcodeLayer.getExtrudeSpeedFactor() <= 50)
-            {
-                fanSpeed = config.fanSpeedMax;
-            }else{
-                int n = gcodeLayer.getExtrudeSpeedFactor() - 50;
-                fanSpeed = config.fanSpeedMin * n / 50 + config.fanSpeedMax * (50 - n) / 50;
-            }
-            if (int(layerNr) < config.fanFullOnLayerNr)
-            {
-                //Slow down the fan on the layers below the [fanFullOnLayerNr], where layer 0 is speed 0.
-                fanSpeed = fanSpeed * layerNr / config.fanFullOnLayerNr;
-            }
-            gcode.writeFanCommand(fanSpeed);
-
-            gcodeLayer.writeGCode(config.coolHeadLift > 0, int(layerNr) > 0 ? config.layerThickness : config.initialLayerThickness);
-        }
-
-        log("Wrote layers in %5.2fs.\n", timeKeeper.restart());
-        gcode.tellFileSize();
-        gcode.writeFanCommand(0);
-
-        //Store the object height for when we are printing multiple objects, as we need to clear every one of them when moving to the next position.
-        maxObjectHeight = std::max(maxObjectHeight, storage.modelSize.z);
-    }
-
-    //Add a single layer from a single mesh-volume to the GCode
-    void addVolumeLayerToGCode(SliceDataStorage& storage, GCodePlanner& gcodeLayer, int volumeIdx, int layerNr)
-    {
-        int prevExtruder = gcodeLayer.getExtruder();
-        bool extruderChanged = gcodeLayer.setExtruder(volumeIdx);
-        if (layerNr == 0 && volumeIdx == 0)
-        {
-            if (storage.skirt.size() > 0)
-                gcodeLayer.addTravel(storage.skirt[storage.skirt.size()-1].closestPointTo(gcode.getPositionXY()));
-            gcodeLayer.addPolygonsByOptimizer(storage.skirt, &skirtConfig);
-        }
-
-        SliceLayer* layer = &storage.volumes[volumeIdx].layers[layerNr];
-        if (extruderChanged)
-            addWipeTower(storage, gcodeLayer, layerNr, prevExtruder);
-
-        if (storage.oozeShield.size() > 0 && storage.volumes.size() > 1)
-        {
-            gcodeLayer.setAlwaysRetract(true);
-            gcodeLayer.addPolygonsByOptimizer(storage.oozeShield[layerNr], &skirtConfig);
-            sendPolygonsToGui("oozeshield", layerNr, layer->printZ, storage.oozeShield[layerNr]);
-            gcodeLayer.setAlwaysRetract(!config.enableCombing);
-        }
-
-        PathOrderOptimizer partOrderOptimizer(gcode.getPositionXY());
-        for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
-        {
-            partOrderOptimizer.addPolygon(layer->parts[partNr].insets[0][0]);
-        }
-        partOrderOptimizer.optimize();
-
-        for(unsigned int partCounter=0; partCounter<partOrderOptimizer.polyOrder.size(); partCounter++)
-        {
-            SliceLayerPart* part = &layer->parts[partOrderOptimizer.polyOrder[partCounter]];
-
-            if (config.enableCombing)
-                gcodeLayer.setCombBoundary(&part->combBoundery);
-            else
-                gcodeLayer.setAlwaysRetract(true);
-
-            if (config.insetCount > 0)
-            {
-                if (config.spiralizeMode)
-                {
-                    if (int(layerNr) >= config.downSkinCount)
-                        inset0Config.spiralize = true;
-                    if (int(layerNr) == config.downSkinCount && part->insets.size() > 0)
-                        gcodeLayer.addPolygonsByOptimizer(part->insets[0], &insetXConfig);
-                }
-                for(int insetNr=part->insets.size()-1; insetNr>-1; insetNr--)
-                {
-                    if (insetNr == 0)
-                        gcodeLayer.addPolygonsByOptimizer(part->insets[insetNr], &inset0Config);
-                    else
-                        gcodeLayer.addPolygonsByOptimizer(part->insets[insetNr], &insetXConfig);
-                }
-            }
-
-            Polygons fillPolygons;
-            int fillAngle = 45;
-            if (layerNr & 1)
-                fillAngle += 90;
-            //int sparseSteps[1] = {config.extrusionWidth};
-            //generateConcentricInfill(part->skinOutline, fillPolygons, sparseSteps, 1);
-            generateLineInfill(part->skinOutline, fillPolygons, config.extrusionWidth, config.extrusionWidth, config.infillOverlap, (part->bridgeAngle > -1) ? part->bridgeAngle : fillAngle);
-            //int sparseSteps[2] = {config.extrusionWidth*5, config.extrusionWidth * 0.8};
-            //generateConcentricInfill(part->sparseOutline, fillPolygons, sparseSteps, 2);
-            if (config.sparseInfillLineDistance > 0)
-            {
-                if (config.sparseInfillLineDistance > config.extrusionWidth * 4)
-                {
-                    generateLineInfill(part->sparseOutline, fillPolygons, config.extrusionWidth, config.sparseInfillLineDistance * 2, config.infillOverlap, 45);
-                    generateLineInfill(part->sparseOutline, fillPolygons, config.extrusionWidth, config.sparseInfillLineDistance * 2, config.infillOverlap, 45 + 90);
-                }
-                else
-                {
-                    generateLineInfill(part->sparseOutline, fillPolygons, config.extrusionWidth, config.sparseInfillLineDistance, config.infillOverlap, fillAngle);
-                }
-            }
-
-            gcodeLayer.addPolygonsByOptimizer(fillPolygons, &fillConfig);
-            //sendPolygonsToGui("infill", layerNr, layer->z, fillPolygons);
-
-            //After a layer part, make sure the nozzle is inside the comb boundary, so we do not retract on the perimeter.
-            if (!config.spiralizeMode || int(layerNr) < config.downSkinCount)
-                gcodeLayer.moveInsideCombBoundary(config.extrusionWidth * 2);
-        }
-        gcodeLayer.setCombBoundary(NULL);
-    }
-
-    void addSupportToGCode(SliceDataStorage& storage, GCodePlanner& gcodeLayer, int layerNr)
-    {
-        if (!storage.support.generated)
-            return;
-
-        if (config.supportExtruder > -1)
-        {
-            int prevExtruder = gcodeLayer.getExtruder();
-            if (gcodeLayer.setExtruder(config.supportExtruder))
-                addWipeTower(storage, gcodeLayer, layerNr, prevExtruder);
-
-            if (storage.oozeShield.size() > 0 && storage.volumes.size() == 1)
-            {
-                gcodeLayer.setAlwaysRetract(true);
-                gcodeLayer.addPolygonsByOptimizer(storage.oozeShield[layerNr], &skirtConfig);
-                gcodeLayer.setAlwaysRetract(!config.enableCombing);
-            }
-        }
-        int32_t z = config.initialLayerThickness + layerNr * config.layerThickness;
-        SupportPolyGenerator supportGenerator(storage.support, z);
-        for(unsigned int volumeCnt = 0; volumeCnt < storage.volumes.size(); volumeCnt++)
-        {
-            SliceLayer* layer = &storage.volumes[volumeCnt].layers[layerNr];
-            for(unsigned int n=0; n<layer->parts.size(); n++)
-                supportGenerator.polygons = supportGenerator.polygons.difference(layer->parts[n].outline.offset(config.supportXYDistance));
-        }
-        //Contract and expand the suppory polygons so small sections are removed and the final polygon is smoothed a bit.
-        supportGenerator.polygons = supportGenerator.polygons.offset(-config.extrusionWidth * 3);
-        supportGenerator.polygons = supportGenerator.polygons.offset(config.extrusionWidth * 3);
-        sendPolygonsToGui("support", layerNr, z, supportGenerator.polygons);
-
-        vector<Polygons> supportIslands = supportGenerator.polygons.splitIntoParts();
-
-        PathOrderOptimizer islandOrderOptimizer(gcode.getPositionXY());
-        for(unsigned int n=0; n<supportIslands.size(); n++)
-        {
-            islandOrderOptimizer.addPolygon(supportIslands[n][0]);
-        }
-        islandOrderOptimizer.optimize();
-
-        for(unsigned int n=0; n<supportIslands.size(); n++)
-        {
-            Polygons& island = supportIslands[islandOrderOptimizer.polyOrder[n]];
-
-            Polygons supportLines;
-            if (config.supportLineDistance > 0)
-            {
-                switch(config.supportType)
-                {
-                case SUPPORT_TYPE_GRID:
-                    if (config.supportLineDistance > config.extrusionWidth * 4)
-                    {
-                        generateLineInfill(island, supportLines, config.extrusionWidth, config.supportLineDistance*2, config.infillOverlap, 0);
-                        generateLineInfill(island, supportLines, config.extrusionWidth, config.supportLineDistance*2, config.infillOverlap, 90);
-                    }else{
-                        generateLineInfill(island, supportLines, config.extrusionWidth, config.supportLineDistance, config.infillOverlap, (layerNr & 1) ? 0 : 90);
-                    }
-                    break;
-                case SUPPORT_TYPE_LINES:
-                    generateLineInfill(island, supportLines, config.extrusionWidth, config.supportLineDistance, config.infillOverlap, 0);
-                    break;
-                }
-            }
-
-            gcodeLayer.forceRetract();
-            if (config.enableCombing)
-                gcodeLayer.setCombBoundary(&island);
-            if (config.supportType == SUPPORT_TYPE_GRID)
-                gcodeLayer.addPolygonsByOptimizer(island, &supportConfig);
-            gcodeLayer.addPolygonsByOptimizer(supportLines, &supportConfig);
-            gcodeLayer.setCombBoundary(NULL);
-        }
-    }
-
-    void addWipeTower(SliceDataStorage& storage, GCodePlanner& gcodeLayer, int layerNr, int prevExtruder)
-    {
-        if (config.wipeTowerSize < 1)
-            return;
-        //If we changed extruder, print the wipe/prime tower for this nozzle;
-        gcodeLayer.addPolygonsByOptimizer(storage.wipeTower, &supportConfig);
-        Polygons fillPolygons;
-        generateLineInfill(storage.wipeTower, fillPolygons, config.extrusionWidth, config.extrusionWidth, config.infillOverlap, 45 + 90 * (layerNr % 2));
-        gcodeLayer.addPolygonsByOptimizer(fillPolygons, &supportConfig);
-
-        //Make sure we wipe the old extruder on the wipe tower.
-        gcodeLayer.addTravel(storage.wipePoint - config.extruderOffset[prevExtruder].p() + config.extruderOffset[gcodeLayer.getExtruder()].p());
-    }
-};
-
-#endif//FFF_PROCESSOR_H

gcodeExport.cpp

@@ -1,615 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include <stdarg.h>
-
-#include "gcodeExport.h"
-#include "pathOrderOptimizer.h"
-#include "timeEstimate.h"
-#include "settings.h"
-#include "utils/logoutput.h"
-
-#if defined(__APPLE__) && defined(__MACH__)
-//On MacOS the file offset functions are always 64bit.
-#define off64_t off_t
-#define ftello64 ftello
-#define fseeko64 fseeko
-#endif
-
-GCodeExport::GCodeExport()
-: currentPosition(0,0,0)
-{
-    extrusionAmount = 0;
-    extrusionPerMM = 0;
-    retractionAmount = 4.5;
-    minimalExtrusionBeforeRetraction = 0.0;
-    extrusionAmountAtPreviousRetraction = -10000;
-    extruderSwitchRetraction = 14.5;
-    extruderNr = 0;
-    currentFanSpeed = -1;
-    
-    totalPrintTime = 0.0;
-    for(unsigned int e=0; e<MAX_EXTRUDERS; e++)
-        totalFilament[e] = 0.0;
-    
-    currentSpeed = 0;
-    retractionSpeed = 45;
-    isRetracted = true;
-    memset(extruderOffset, 0, sizeof(extruderOffset));
-    f = stdout;
-}
-
-GCodeExport::~GCodeExport()
-{
-    if (f && f != stdout)
-        fclose(f);
-}
-
-void GCodeExport::replaceTagInStart(const char* tag, const char* replaceValue)
-{
-    if (f == stdout)
-    {
-        log("Replace:%s:%s\n", tag, replaceValue);
-        return;
-    }
-    off64_t oldPos = ftello64(f);
-    
-    char buffer[1024];
-    fseeko64(f, 0, SEEK_SET);
-    fread(buffer, 1024, 1, f);
-    
-    char* c = strstr(buffer, tag);
-    memset(c, ' ', strlen(tag));
-    if (c) memcpy(c, replaceValue, strlen(replaceValue));
-    
-    fseeko64(f, 0, SEEK_SET);
-    fwrite(buffer, 1024, 1, f);
-    
-    fseeko64(f, oldPos, SEEK_SET);
-}
-
-void GCodeExport::setExtruderOffset(int id, Point p)
-{
-    extruderOffset[id] = p;
-}
-
-void GCodeExport::setFlavor(int flavor)
-{
-    this->flavor = flavor;
-}
-int GCodeExport::getFlavor()
-{
-    return this->flavor;
-}
-
-void GCodeExport::setFilename(const char* filename)
-{
-    f = fopen(filename, "w+");
-}
-
-bool GCodeExport::isOpened()
-{
-    return f != NULL;
-}
-
-void GCodeExport::setExtrusion(int layerThickness, int filamentDiameter, int flow)
-{
-    double filamentArea = M_PI * (INT2MM(filamentDiameter) / 2.0) * (INT2MM(filamentDiameter) / 2.0);
-    if (flavor == GCODE_FLAVOR_ULTIGCODE)//UltiGCode uses volume extrusion as E value, and thus does not need the filamentArea in the mix.
-        extrusionPerMM = INT2MM(layerThickness);
-    else
-        extrusionPerMM = INT2MM(layerThickness) / filamentArea * double(flow) / 100.0;
-}
-
-void GCodeExport::setRetractionSettings(int retractionAmount, int retractionSpeed, int extruderSwitchRetraction, int minimalExtrusionBeforeRetraction, int zHop)
-{
-    this->retractionAmount = INT2MM(retractionAmount);
-    this->retractionSpeed = retractionSpeed;
-    this->extruderSwitchRetraction = INT2MM(extruderSwitchRetraction);
-    this->minimalExtrusionBeforeRetraction = INT2MM(minimalExtrusionBeforeRetraction);
-    this->retractionZHop = zHop;
-}
-
-void GCodeExport::setZ(int z)
-{
-    this->zPos = z;
-}
-
-Point GCodeExport::getPositionXY()
-{
-    return Point(currentPosition.x, currentPosition.y);
-}
-
-int GCodeExport::getPositionZ()
-{
-    return currentPosition.z;
-}
-
-int GCodeExport::getExtruderNr()
-{
-    return extruderNr;
-}
-
-double GCodeExport::getTotalFilamentUsed(int e)
-{
-    if (e == extruderNr)
-        return totalFilament[e] + extrusionAmount;
-    return totalFilament[e];
-}
-
-double GCodeExport::getTotalPrintTime()
-{
-    return totalPrintTime;
-}
-
-void GCodeExport::updateTotalPrintTime()
-{
-    totalPrintTime += estimateCalculator.calculate();
-    estimateCalculator.reset();
-}
-
-void GCodeExport::writeComment(const char* comment, ...)
-{
-    va_list args;
-    va_start(args, comment);
-    fprintf(f, ";");
-    vfprintf(f, comment, args);
-    fprintf(f, "\n");
-    va_end(args);
-}
-
-void GCodeExport::writeLine(const char* line, ...)
-{
-    va_list args;
-    va_start(args, line);
-    vfprintf(f, line, args);
-    fprintf(f, "\n");
-    va_end(args);
-}
-
-void GCodeExport::resetExtrusionValue()
-{
-    if (extrusionAmount != 0.0 && flavor != GCODE_FLAVOR_MAKERBOT)
-    {
-        fprintf(f, "G92 E0\n");
-        totalFilament[extruderNr] += extrusionAmount;
-        extrusionAmountAtPreviousRetraction -= extrusionAmount;
-        extrusionAmount = 0.0;
-    }
-}
-
-void GCodeExport::writeDelay(double timeAmount)
-{
-    fprintf(f, "G4 P%d\n", int(timeAmount * 1000));
-    totalPrintTime += timeAmount;
-}
-
-void GCodeExport::writeMove(Point p, int speed, int lineWidth)
-{
-    if (lineWidth != 0)
-    {
-        Point diff = p - getPositionXY();
-        if (isRetracted)
-        {
-            if (retractionZHop > 0)
-                fprintf(f, "G1 Z%0.2f\n", INT2MM(currentPosition.z));
-            if (flavor == GCODE_FLAVOR_ULTIGCODE)
-            {
-                fprintf(f, "G11\n");
-            }else{
-                fprintf(f, "G1 F%i E%0.5lf\n", retractionSpeed * 60, extrusionAmount);
-                currentSpeed = retractionSpeed;
-                estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(p.X), INT2MM(p.Y), INT2MM(zPos), extrusionAmount), currentSpeed);
-            }
-            if (extrusionAmount > 10000.0) //According to https://github.com/Ultimaker/CuraEngine/issues/14 having more then 21m of extrusion causes inaccuracies. So reset it every 10m, just to be sure.
-                resetExtrusionValue();
-            isRetracted = false;
-        }
-        extrusionAmount += extrusionPerMM * INT2MM(lineWidth) * vSizeMM(diff);
-        fprintf(f, "G1");
-    }else{
-        fprintf(f, "G0");
-    }
-    
-    if (currentSpeed != speed)
-    {
-        fprintf(f, " F%i", speed * 60);
-        currentSpeed = speed;
-    }
-    fprintf(f, " X%0.2f Y%0.2f", INT2MM(p.X - extruderOffset[extruderNr].X), INT2MM(p.Y - extruderOffset[extruderNr].Y));
-    if (zPos != currentPosition.z)
-        fprintf(f, " Z%0.2f", INT2MM(zPos));
-    if (lineWidth != 0)
-        fprintf(f, " E%0.5lf", extrusionAmount);
-    fprintf(f, "\n");
-    
-    currentPosition = Point3(p.X, p.Y, zPos);
-    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusionAmount), currentSpeed);
-}
-
-void GCodeExport::writeRetraction()
-{
-    if (retractionAmount > 0 && !isRetracted && extrusionAmountAtPreviousRetraction + minimalExtrusionBeforeRetraction < extrusionAmount)
-    {
-        if (flavor == GCODE_FLAVOR_ULTIGCODE)
-        {
-            fprintf(f, "G10\n");
-        }else{
-            fprintf(f, "G1 F%i E%0.5lf\n", retractionSpeed * 60, extrusionAmount - retractionAmount);
-            currentSpeed = retractionSpeed;
-            estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusionAmount - retractionAmount), currentSpeed);
-        }
-        if (retractionZHop > 0)
-            fprintf(f, "G1 Z%0.2f\n", INT2MM(currentPosition.z + retractionZHop));
-        extrusionAmountAtPreviousRetraction = extrusionAmount;
-        isRetracted = true;
-    }
-}
-
-void GCodeExport::switchExtruder(int newExtruder)
-{
-    if (extruderNr == newExtruder)
-        return;
-    
-    resetExtrusionValue();
-    extruderNr = newExtruder;
-
-    if (flavor == GCODE_FLAVOR_ULTIGCODE)
-    {
-        fprintf(f, "G10 S1\n");
-    }else{
-        fprintf(f, "G1 F%i E%0.4lf\n", retractionSpeed * 60, extrusionAmount - extruderSwitchRetraction);
-        currentSpeed = retractionSpeed;
-    }
-    isRetracted = true;
-    if (flavor == GCODE_FLAVOR_MAKERBOT)
-        fprintf(f, "M135 T%i\n", extruderNr);
-    else
-        fprintf(f, "T%i\n", extruderNr);
-}
-
-void GCodeExport::writeCode(const char* str)
-{
-    fprintf(f, "%s\n", str);
-}
-
-void GCodeExport::writeFanCommand(int speed)
-{
-    if (currentFanSpeed == speed)
-        return;
-    if (speed > 0)
-    {
-        if (flavor == GCODE_FLAVOR_MAKERBOT)
-            fprintf(f, "M126 T0 ; value = %d\n", speed * 255 / 100);
-        else
-            fprintf(f, "M106 S%d\n", speed * 255 / 100);
-    }
-    else
-    {
-        if (flavor == GCODE_FLAVOR_MAKERBOT)
-            fprintf(f, "M127 T0\n");
-        else
-            fprintf(f, "M107\n");
-    }
-    currentFanSpeed = speed;
-}
-
-int GCodeExport::getFileSize(){
-    return ftell(f);
-}
-void GCodeExport::tellFileSize() {
-    float fsize = (float) ftell(f);
-    if(fsize > 1024*1024) {
-        fsize /= 1024.0*1024.0;
-        log("Wrote %5.1f MB.\n",fsize);
-    }
-    if(fsize > 1024) {
-        fsize /= 1024.0;
-        log("Wrote %5.1f kilobytes.\n",fsize);
-    }
-}
-
-void GCodeExport::finalize(int maxObjectHeight, int moveSpeed, const char* endCode)
-{
-    writeFanCommand(0);
-    writeRetraction();
-    setZ(maxObjectHeight + 5000);
-    writeMove(getPositionXY(), moveSpeed, 0);
-    writeCode(endCode);
-    log("Print time: %d\n", int(getTotalPrintTime()));
-    log("Filament: %d\n", int(getTotalFilamentUsed(0)));
-    log("Filament2: %d\n", int(getTotalFilamentUsed(1)));
-    
-    if (getFlavor() == GCODE_FLAVOR_ULTIGCODE)
-    {
-        char numberString[16];
-        sprintf(numberString, "%d", int(getTotalPrintTime()));
-        replaceTagInStart("<__TIME__>", numberString);
-        sprintf(numberString, "%d", int(getTotalFilamentUsed(0)));
-        replaceTagInStart("<FILAMENT>", numberString);
-        sprintf(numberString, "%d", int(getTotalFilamentUsed(1)));
-        replaceTagInStart("<FILAMEN2>", numberString);
-    }
-}
-
-GCodePath* GCodePlanner::getLatestPathWithConfig(GCodePathConfig* config)
-{
-    if (paths.size() > 0 && paths[paths.size()-1].config == config && !paths[paths.size()-1].done)
-        return &paths[paths.size()-1];
-    paths.push_back(GCodePath());
-    GCodePath* ret = &paths[paths.size()-1];
-    ret->retract = false;
-    ret->config = config;
-    ret->extruder = currentExtruder;
-    ret->done = false;
-    return ret;
-}
-void GCodePlanner::forceNewPathStart()
-{
-    if (paths.size() > 0)
-        paths[paths.size()-1].done = true;
-}
-
-GCodePlanner::GCodePlanner(GCodeExport& gcode, int travelSpeed, int retractionMinimalDistance)
-: gcode(gcode), travelConfig(travelSpeed, 0, "travel")
-{
-    lastPosition = gcode.getPositionXY();
-    comb = NULL;
-    extrudeSpeedFactor = 100;
-    travelSpeedFactor = 100;
-    extraTime = 0.0;
-    totalPrintTime = 0.0;
-    forceRetraction = false;
-    alwaysRetract = false;
-    currentExtruder = gcode.getExtruderNr();
-    this->retractionMinimalDistance = retractionMinimalDistance;
-}
-GCodePlanner::~GCodePlanner()
-{
-    if (comb)
-        delete comb;
-}
-
-void GCodePlanner::addTravel(Point p)
-{
-    GCodePath* path = getLatestPathWithConfig(&travelConfig);
-    if (forceRetraction)
-    {
-        if (!shorterThen(lastPosition - p, retractionMinimalDistance))
-        {
-            path->retract = true;
-        }
-        forceRetraction = false;
-    }else if (comb != NULL)
-    {
-        vector<Point> pointList;
-        if (comb->calc(lastPosition, p, pointList))
-        {
-            for(unsigned int n=0; n<pointList.size(); n++)
-            {
-                path->points.push_back(pointList[n]);
-            }
-        }else{
-            if (!shorterThen(lastPosition - p, retractionMinimalDistance))
-                path->retract = true;
-        }
-    }else if (alwaysRetract)
-    {
-        if (!shorterThen(lastPosition - p, retractionMinimalDistance))
-            path->retract = true;
-    }
-    path->points.push_back(p);
-    lastPosition = p;
-}
-
-void GCodePlanner::addExtrusionMove(Point p, GCodePathConfig* config)
-{
-    getLatestPathWithConfig(config)->points.push_back(p);
-    lastPosition = p;
-}
-
-void GCodePlanner::moveInsideCombBoundary(int distance)
-{
-    if (!comb || comb->checkInside(lastPosition)) return;
-    Point p = lastPosition;
-    if (comb->moveInside(&p, distance))
-    {
-        //Move inside again, so we move out of tight 90deg corners
-        comb->moveInside(&p, distance);
-        if (comb->checkInside(p))
-        {
-            addTravel(p);
-            //Make sure the that any retraction happens after this move, not before it by starting a new move path.
-            forceNewPathStart();
-        }
-    }
-}
-
-void GCodePlanner::addPolygon(PolygonRef polygon, int startIdx, GCodePathConfig* config)
-{
-    Point p0 = polygon[startIdx];
-    addTravel(p0);
-    for(unsigned int i=1; i<polygon.size(); i++)
-    {
-        Point p1 = polygon[(startIdx + i) % polygon.size()];
-        addExtrusionMove(p1, config);
-        p0 = p1;
-    }
-    if (polygon.size() > 2)
-        addExtrusionMove(polygon[startIdx], config);
-}
-
-void GCodePlanner::addPolygonsByOptimizer(Polygons& polygons, GCodePathConfig* config)
-{
-    PathOrderOptimizer orderOptimizer(lastPosition);
-    for(unsigned int i=0;i<polygons.size();i++)
-        orderOptimizer.addPolygon(polygons[i]);
-    orderOptimizer.optimize();
-    for(unsigned int i=0;i<orderOptimizer.polyOrder.size();i++)
-    {
-        int nr = orderOptimizer.polyOrder[i];
-        addPolygon(polygons[nr], orderOptimizer.polyStart[nr], config);
-    }
-}
-
-void GCodePlanner::forceMinimalLayerTime(double minTime, int minimalSpeed)
-{
-    Point p0 = gcode.getPositionXY();
-    double travelTime = 0.0;
-    double extrudeTime = 0.0;
-    for(unsigned int n=0; n<paths.size(); n++)
-    {
-        GCodePath* path = &paths[n];
-        for(unsigned int i=0; i<path->points.size(); i++)
-        {
-            double thisTime = vSizeMM(p0 - path->points[i]) / double(path->config->speed);
-            if (path->config->lineWidth != 0)
-                extrudeTime += thisTime;
-            else
-                travelTime += thisTime;
-            p0 = path->points[i];
-        }
-    }
-    double totalTime = extrudeTime + travelTime;
-    if (totalTime < minTime && extrudeTime > 0.0)
-    {
-        double minExtrudeTime = minTime - travelTime;
-        if (minExtrudeTime < 1)
-            minExtrudeTime = 1;
-        double factor = extrudeTime / minExtrudeTime;
-        for(unsigned int n=0; n<paths.size(); n++)
-        {
-            GCodePath* path = &paths[n];
-            if (path->config->lineWidth == 0)
-                continue;
-            int speed = path->config->speed * factor;
-            if (speed < minimalSpeed)
-                factor = double(minimalSpeed) / double(path->config->speed);
-        }
-        
-        //Only slow down with the minimal time if that will be slower then a factor already set. First layer slowdown also sets the speed factor.
-        if (factor * 100 < getExtrudeSpeedFactor())
-            setExtrudeSpeedFactor(factor * 100);
-        else
-            factor = getExtrudeSpeedFactor() / 100.0;
-        
-        if (minTime - (extrudeTime / factor) - travelTime > 0.1)
-        {
-            //TODO: Use up this extra time (circle around the print?)
-            this->extraTime = minTime - (extrudeTime / factor) - travelTime;
-        }
-        this->totalPrintTime = (extrudeTime / factor) + travelTime;
-    }else{
-        this->totalPrintTime = totalTime;
-    }
-}
-
-void GCodePlanner::writeGCode(bool liftHeadIfNeeded, int layerThickness)
-{
-    GCodePathConfig* lastConfig = NULL;
-    int extruder = gcode.getExtruderNr();
-
-    for(unsigned int n=0; n<paths.size(); n++)
-    {
-        GCodePath* path = &paths[n];
-        if (extruder != path->extruder)
-        {
-            extruder = path->extruder;
-            gcode.switchExtruder(extruder);
-        }else if (path->retract)
-        {
-            gcode.writeRetraction();
-        }
-        if (path->config != &travelConfig && lastConfig != path->config)
-        {
-            gcode.writeComment("TYPE:%s", path->config->name);
-            lastConfig = path->config;
-        }
-        int speed = path->config->speed;
-        
-        if (path->config->lineWidth != 0)// Only apply the extrudeSpeedFactor to extrusion moves
-            speed = speed * extrudeSpeedFactor / 100;
-        else
-            speed = speed * travelSpeedFactor / 100;
-        
-        if (path->points.size() == 1 && path->config != &travelConfig && shorterThen(gcode.getPositionXY() - path->points[0], path->config->lineWidth * 2))
-        {
-            //Check for lots of small moves and combine them into one large line
-            Point p0 = path->points[0];
-            unsigned int i = n + 1;
-            while(i < paths.size() && paths[i].points.size() == 1 && shorterThen(p0 - paths[i].points[0], path->config->lineWidth * 2))
-            {
-                p0 = paths[i].points[0];
-                i ++;
-            }
-            if (paths[i-1].config == &travelConfig)
-                i --;
-            if (i > n + 2)
-            {
-                p0 = gcode.getPositionXY();
-                for(unsigned int x=n; x<i-1; x+=2)
-                {
-                    int64_t oldLen = vSize(p0 - paths[x].points[0]);
-                    Point newPoint = (paths[x].points[0] + paths[x+1].points[0]) / 2;
-                    int64_t newLen = vSize(gcode.getPositionXY() - newPoint);
-                    if (newLen > 0)
-                        gcode.writeMove(newPoint, speed, path->config->lineWidth * oldLen / newLen);
-                    
-                    p0 = paths[x+1].points[0];
-                }
-                gcode.writeMove(paths[i-1].points[0], speed, path->config->lineWidth);
-                n = i - 1;
-                continue;
-            }
-        }
-        
-        bool spiralize = path->config->spiralize;
-        if (spiralize)
-        {
-            //Check if we are the last spiralize path in the list, if not, do not spiralize.
-            for(unsigned int m=n+1; m<paths.size(); m++)
-            {
-                if (paths[m].config->spiralize)
-                    spiralize = false;
-            }
-        }
-        if (spiralize)
-        {
-            //If we need to spiralize then raise the head slowly by 1 layer as this path progresses.
-            float totalLength = 0.0;
-            int z = gcode.getPositionZ();
-            Point p0 = gcode.getPositionXY();
-            for(unsigned int i=0; i<path->points.size(); i++)
-            {
-                Point p1 = path->points[i];
-                totalLength += vSizeMM(p0 - p1);
-                p0 = p1;
-            }
-            
-            float length = 0.0;
-            p0 = gcode.getPositionXY();
-            for(unsigned int i=0; i<path->points.size(); i++)
-            {
-                Point p1 = path->points[i];
-                length += vSizeMM(p0 - p1);
-                p0 = p1;
-                gcode.setZ(z + layerThickness * length / totalLength);
-                gcode.writeMove(path->points[i], speed, path->config->lineWidth);
-            }
-        }else{
-            for(unsigned int i=0; i<path->points.size(); i++)
-            {
-                gcode.writeMove(path->points[i], speed, path->config->lineWidth);
-            }
-        }
-    }
-    
-    gcode.updateTotalPrintTime();
-    if (liftHeadIfNeeded && extraTime > 0.0)
-    {
-        gcode.writeComment("Small layer, adding delay of %f", extraTime);
-        gcode.writeRetraction();
-        gcode.setZ(gcode.getPositionZ() + MM2INT(3.0));
-        gcode.writeMove(gcode.getPositionXY(), travelConfig.speed, 0);
-        gcode.writeMove(gcode.getPositionXY() - Point(-MM2INT(20.0), 0), travelConfig.speed, 0);
-        gcode.writeDelay(extraTime);
-    }
-}

gcodeExport.h

@@ -1,221 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef GCODEEXPORT_H
-#define GCODEEXPORT_H
-
-#include <stdio.h>
-
-#include "settings.h"
-#include "comb.h"
-#include "utils/intpoint.h"
-#include "utils/polygon.h"
-#include "timeEstimate.h"
-
-//The GCodeExport class writes the actual GCode. This is the only class that knows how GCode looks and feels.
-//  Any customizations on GCodes flavors are done in this class.
-class GCodeExport
-{
-private:
-    FILE* f;
-    double extrusionAmount;
-    double extrusionPerMM;
-    double retractionAmount;
-    int retractionZHop;
-    double extruderSwitchRetraction;
-    double minimalExtrusionBeforeRetraction;
-    double extrusionAmountAtPreviousRetraction;
-    Point3 currentPosition;
-    Point extruderOffset[MAX_EXTRUDERS];
-    int currentSpeed, retractionSpeed;
-    int zPos;
-    bool isRetracted;
-    int extruderNr;
-    int currentFanSpeed;
-    int flavor;
-    
-    double totalFilament[MAX_EXTRUDERS];
-    double totalPrintTime;
-    TimeEstimateCalculator estimateCalculator;
-public:
-    
-    GCodeExport();
-    
-    ~GCodeExport();
-    
-    void replaceTagInStart(const char* tag, const char* replaceValue);
-    
-    void setExtruderOffset(int id, Point p);
-    
-    void setFlavor(int flavor);
-    int getFlavor();
-    
-    void setFilename(const char* filename);
-    
-    bool isOpened();
-    
-    void setExtrusion(int layerThickness, int filamentDiameter, int flow);
-    
-    void setRetractionSettings(int retractionAmount, int retractionSpeed, int extruderSwitchRetraction, int minimalExtrusionBeforeRetraction, int zHop);
-    
-    void setZ(int z);
-    
-    Point getPositionXY();
-    
-    int getPositionZ();
-
-    int getExtruderNr();
-    
-    double getTotalFilamentUsed(int e);
-
-    double getTotalPrintTime();
-    void updateTotalPrintTime();
-    
-    void writeComment(const char* comment, ...);
-
-    void writeLine(const char* line, ...);
-    
-    void resetExtrusionValue();
-    
-    void writeDelay(double timeAmount);
-    
-    void writeMove(Point p, int speed, int lineWidth);
-    
-    void writeRetraction();
-    
-    void switchExtruder(int newExtruder);
-    
-    void writeCode(const char* str);
-    
-    void writeFanCommand(int speed);
-    
-    void finalize(int maxObjectHeight, int moveSpeed, const char* endCode);
-
-    int getFileSize();
-    void tellFileSize();
-};
-
-//The GCodePathConfig is the configuration for moves/extrusion actions. This defines at which width the line is printed and at which speed.
-class GCodePathConfig
-{
-public:
-    int speed;
-    int lineWidth;
-    const char* name;
-    bool spiralize;
-    
-    GCodePathConfig() : speed(0), lineWidth(0), name(NULL), spiralize(false) {}
-    GCodePathConfig(int speed, int lineWidth, const char* name) : speed(speed), lineWidth(lineWidth), name(name), spiralize(false) {}
-    
-    void setData(int speed, int lineWidth, const char* name)
-    {
-        this->speed = speed;
-        this->lineWidth = lineWidth;
-        this->name = name;
-    }
-};
-
-class GCodePath
-{
-public:
-    GCodePathConfig* config;
-    bool retract;
-    int extruder;
-    vector<Point> points;
-    bool done;//Path is finished, no more moves should be added, and a new path should be started instead of any appending done to this one.
-};
-
-//The GCodePlanner class stores multiple moves that are planned.
-// It facilitates the combing to keep the head inside the print.
-// It also keeps track of the print time estimate for this planning so speed adjustments can be made for the minimal-layer-time.
-class GCodePlanner
-{
-private:
-    GCodeExport& gcode;
-    
-    Point lastPosition;
-    vector<GCodePath> paths;
-    Comb* comb;
-    
-    GCodePathConfig travelConfig;
-    int extrudeSpeedFactor;
-    int travelSpeedFactor;
-    int currentExtruder;
-    int retractionMinimalDistance;
-    bool forceRetraction;
-    bool alwaysRetract;
-    double extraTime;
-    double totalPrintTime;
-private:
-    GCodePath* getLatestPathWithConfig(GCodePathConfig* config);
-    void forceNewPathStart();
-public:
-    GCodePlanner(GCodeExport& gcode, int travelSpeed, int retractionMinimalDistance);
-    ~GCodePlanner();
-    
-    bool setExtruder(int extruder)
-    {
-        if (extruder == currentExtruder)
-            return false;
-        currentExtruder = extruder;
-        return true;
-    }
-    
-    int getExtruder()
-    {
-        return currentExtruder;
-    }
-
-    void setCombBoundary(Polygons* polygons)
-    {
-        if (comb)
-            delete comb;
-        if (polygons)
-            comb = new Comb(*polygons);
-        else
-            comb = NULL;
-    }
-    
-    void setAlwaysRetract(bool alwaysRetract)
-    {
-        this->alwaysRetract = alwaysRetract;
-    }
-    
-    void forceRetract()
-    {
-        forceRetraction = true;
-    }
-    
-    void setExtrudeSpeedFactor(int speedFactor)
-    {
-        if (speedFactor < 1) speedFactor = 1;
-        this->extrudeSpeedFactor = speedFactor;
-    }
-    int getExtrudeSpeedFactor()
-    {
-        return this->extrudeSpeedFactor;
-    }
-    void setTravelSpeedFactor(int speedFactor)
-    {
-        if (speedFactor < 1) speedFactor = 1;
-        this->travelSpeedFactor = speedFactor;
-    }
-    int getTravelSpeedFactor()
-    {
-        return this->travelSpeedFactor;
-    }
-    
-    void addTravel(Point p);
-    
-    void addExtrusionMove(Point p, GCodePathConfig* config);
-    
-    void moveInsideCombBoundary(int distance);
-
-    void addPolygon(PolygonRef polygon, int startIdx, GCodePathConfig* config);
-
-    void addPolygonsByOptimizer(Polygons& polygons, GCodePathConfig* config);
-    
-    void forceMinimalLayerTime(double minTime, int minimalSpeed);
-    
-    void writeGCode(bool liftHeadIfNeeded, int layerThickness);
-};
-
-#endif//GCODEEXPORT_H

infill.cpp

@@ -1,79 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "infill.h"
-
-void generateConcentricInfill(Polygons outline, Polygons& result, int offsets[], int offsetsSize)
-{
-    int step = 0;
-    while(1)
-    {
-        for(unsigned int polygonNr=0; polygonNr<outline.size(); polygonNr++)
-            result.add(outline[polygonNr]);
-        outline = outline.offset(-offsets[step]);
-        if (outline.size() < 1)
-            break;
-        step = (step + 1) % offsetsSize;
-    }
-}
-
-int compare_int64_t(const void* a, const void* b)
-{
-    int64_t n = (*(int64_t*)a) - (*(int64_t*)b);
-    if (n < 0) return -1;
-    if (n > 0) return 1;
-    return 0;
-}
-
-void generateLineInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation)
-{
-    Polygons outline = in_outline.offset(extrusionWidth * infillOverlap / 100);
-    PointMatrix matrix(rotation);
-    
-    outline.applyMatrix(matrix);
-    
-    AABB boundary(outline);
-    
-    boundary.min.X = ((boundary.min.X / lineSpacing) - 1) * lineSpacing;
-    int lineCount = (boundary.max.X - boundary.min.X + (lineSpacing - 1)) / lineSpacing;
-    vector<vector<int64_t> > cutList;
-    for(int n=0; n<lineCount; n++)
-        cutList.push_back(vector<int64_t>());
-
-    for(unsigned int polyNr=0; polyNr < outline.size(); polyNr++)
-    {
-        Point p1 = outline[polyNr][outline[polyNr].size()-1];
-        for(unsigned int i=0; i < outline[polyNr].size(); i++)
-        {
-            Point p0 = outline[polyNr][i];
-            int idx0 = (p0.X - boundary.min.X) / lineSpacing;
-            int idx1 = (p1.X - boundary.min.X) / lineSpacing;
-            int64_t xMin = p0.X, xMax = p1.X;
-            if (p0.X > p1.X) { xMin = p1.X; xMax = p0.X; }
-            if (idx0 > idx1) { int tmp = idx0; idx0 = idx1; idx1 = tmp; }
-            for(int idx = idx0; idx<=idx1; idx++)
-            {
-                int x = (idx * lineSpacing) + boundary.min.X + lineSpacing / 2;
-                if (x < xMin) continue;
-                if (x >= xMax) continue;
-                int y = p0.Y + (p1.Y - p0.Y) * (x - p0.X) / (p1.X - p0.X);
-                cutList[idx].push_back(y);
-            }
-            p1 = p0;
-        }
-    }
-    
-    int idx = 0;
-    for(int64_t x = boundary.min.X + lineSpacing / 2; x < boundary.max.X; x += lineSpacing)
-    {
-        qsort(cutList[idx].data(), cutList[idx].size(), sizeof(int64_t), compare_int64_t);
-        for(unsigned int i = 0; i + 1 < cutList[idx].size(); i+=2)
-        {
-            if (cutList[idx][i+1] - cutList[idx][i] < extrusionWidth / 5)
-                continue;
-            PolygonRef p = result.newPoly();
-            p.add(matrix.unapply(Point(x, cutList[idx][i])));
-            p.add(matrix.unapply(Point(x, cutList[idx][i+1])));
-        }
-        idx += 1;
-    }
-}
-

infill.h

@@ -1,10 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef INFILL_H
-#define INFILL_H
-
-#include "utils/polygon.h"
-
-void generateConcentricInfill(Polygons outline, Polygons& result, int offsets[], int offsetsSize);
-void generateLineInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
-
-#endif//INFILL_H

inset.cpp

@@ -1,45 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "inset.h"
-#include "polygonOptimizer.h"
-
-void generateInsets(SliceLayerPart* part, int offset, int insetCount)
-{
-    part->combBoundery = part->outline.offset(-offset);
-    if (insetCount == 0)
-    {
-        part->insets.push_back(part->outline);
-        return;
-    }
-    
-    for(int i=0; i<insetCount; i++)
-    {
-        part->insets.push_back(Polygons());
-        part->insets[i] = part->outline.offset(-offset * i - offset/2);
-        optimizePolygons(part->insets[i]);
-        if (part->insets[i].size() < 1)
-        {
-            part->insets.pop_back();
-            break;
-        }
-    }
-}
-
-void generateInsets(SliceLayer* layer, int offset, int insetCount)
-{
-    for(unsigned int partNr = 0; partNr < layer->parts.size(); partNr++)
-    {
-        generateInsets(&layer->parts[partNr], offset, insetCount);
-    }
-    
-    //Remove the parts which did not generate an inset. As these parts are too small to print,
-    // and later code can now assume that there is always minimal 1 inset line.
-    for(unsigned int partNr = 0; partNr < layer->parts.size(); partNr++)
-    {
-        if (layer->parts[partNr].insets.size() < 1)
-        {
-            layer->parts.erase(layer->parts.begin() + partNr);
-            partNr -= 1;
-        }
-    }
-}
-

inset.h

@@ -1,11 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef INSET_H
-#define INSET_H
-
-#include "sliceDataStorage.h"
-
-void generateInsets(SliceLayerPart* part, int offset, int insetCount);
-
-void generateInsets(SliceLayer* layer, int offset, int insetCount);
-
-#endif//INSET_H

libs/DO_NOT_CHANGE_THESE

@@ -0,0 +1,3 @@
+These libraries are extern, and while they're utilized by this project,
+they are in fact not actually developed on this repository.
+If changes are desired for these projects, please refer to their official repositories.

libs/clipper/License.txt

@@ -1,26 +1,26 @@
-The Clipper Library (including Delphi, C++ & C# source code, other accompanying
-code, examples and documentation), hereafter called "the Software", has been 
-released under the following license, terms and conditions:
-
-Boost Software License - Version 1.0 - August 17th, 2003
-http://www.boost.org/LICENSE_1_0.txt
-
-Permission is hereby granted, free of charge, to any person or organization 
-obtaining a copy of the Software covered by this license to use, reproduce, 
-display, distribute, execute, and transmit the Software, and to prepare 
-derivative works of the Software, and to permit third-parties to whom the 
-Software is furnished to do so, all subject to the following:
-
-The copyright notices in the Software and this entire statement, including the 
-above license grant, this restriction and the following disclaimer, must be 
-included in all copies of the Software, in whole or in part, and all derivative 
-works of the Software, unless such copies or derivative works are solely in the 
-form of machine-executable object code generated by a source language processor.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
-FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL 
-THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY 
-DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING 
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 
-THE SOFTWARE.
+The Clipper Library (including Delphi, C++ & C# source code, other accompanying
+code, examples and documentation), hereafter called "the Software", has been 
+released under the following license, terms and conditions:
+
+Boost Software License - Version 1.0 - August 17th, 2003
+http://www.boost.org/LICENSE_1_0.txt
+
+Permission is hereby granted, free of charge, to any person or organization 
+obtaining a copy of the Software covered by this license to use, reproduce, 
+display, distribute, execute, and transmit the Software, and to prepare 
+derivative works of the Software, and to permit third-parties to whom the 
+Software is furnished to do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including the 
+above license grant, this restriction and the following disclaimer, must be 
+included in all copies of the Software, in whole or in part, and all derivative 
+works of the Software, unless such copies or derivative works are solely in the 
+form of machine-executable object code generated by a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL 
+THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY 
+DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING 
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 
+THE SOFTWARE.

libs/clipper/README

@@ -1,376 +1,376 @@
-=====================================================================
-Clipper Change Log
-=====================================================================
-
-v6.1.3 (19 January 2014)
-* Fixed potential endless loop condition when adding open 
-  paths to Clipper.
-* Fixed missing implementation of SimplifyPolygon function 
-  in C++ code.
-* Fixed incorrect upper range constant for polygon coordinates 
-  in Delphi code.
-* Added PointInPolygon function. 
-* Overloaded MinkowskiSum function to accommodate multi-contour 
-  paths.  
-
-v6.1.2 (15 December 2013)
-* Fixed broken C++ header file.
-* Minor improvement to joining polygons.
-
-v6.1.1 (13 December 2013)
-* Fixed a couple of bugs affecting open paths that could 
-  raise unhandled exceptions.
-  
-v6.1.0 (12 December 2013)
-* Deleted: Previously deprecated code has been removed. 
-* Modified: The OffsetPaths function is now deprecated as it has 
-  been replaced by the ClipperOffset class which is much more 
-  flexible. 
-* Bugfixes: Several minor bugs have been fixed including 
-  occasionally an incorrect nesting within the PolyTree structure.
-
-v6.0.0 (30 October 2013)
-* Added: Open path (polyline) clipping. A new 'Curves' demo 
-  application showcases this (see the 'Curves' directory). 
-* Update: Major improvement in the merging of 
-  shared/collinear edges in clip solutions (see Execute). 
-* Added: The IntPoint structure now has an optional 'Z' member. 
-  (See the precompiler directive use_xyz.) 
-* Added: Users can now force Clipper to use 32bit integers 
-  (via the precompiler directive use_int32) instead of using 
-  64bit integers.
-* Modified: To accommodate open paths, the Polygon and Polygons 
-  structures have been renamed Path and Paths respectively. The 
-  AddPolygon and AddPolygons methods of the ClipperBase class 
-  have been renamed AddPath and AddPaths respectively. Several 
-  other functions have been similarly renamed. 
-* Modified: The PolyNode Class has a new IsOpen property. 
-* Modified: The Clipper class has a new ZFillFunction property. 
-* Added: MinkowskiSum and MinkowskiDiff functions added. 
-* Added: Several other new functions have been added including 
-  PolyTreeToPaths, OpenPathsFromPolyTree and ClosedPathsFromPolyTree. 
-* Added: The Clipper constructor now accepts an optional InitOptions 
-  parameter to simplify setting properties. 
-* Bugfixes: Numerous minor bugs have been fixed. 
-* Deprecated: Version 6 is a major upgrade from previous versions 
-  and quite a number of changes have been made to exposed structures 
-  and functions. To minimize inconvenience to existing library users, 
-  some code has been retained and some added to maintain backward 
-  compatibility. However, because this code will be removed in a 
-  future update, it has been marked as deprecated and a precompiler 
-  directive use_deprecated has been defined.
-
-v5.1.6 (23 May 2013)
-* BugFix: CleanPolygon function was buggy.
-* Changed: The behaviour of the 'miter' JoinType has been 
-  changed so that when squaring occurs, it's no longer 
-  extended up to the miter limit but is squared off at 
-  exactly 'delta' units. (This improves the look of mitering 
-  with larger limits at acute angles.) 
-* Added: New OffsetPolyLines function
-* Update: Minor code refactoring and optimisations
-
-v5.1.5 (5 May 2013)
-* Added: ForceSimple property to Clipper class
-* Update: Improved documentation  
-
-v5.1.4 (24 March 2013)
-* Update: CleanPolygon function enhanced.
-* Update: Documentation improved.  
-
-v5.1.3 (14 March 2013)
-* Bugfix: Minor bugfixes.
-* Update: Documentation significantly improved.  
-
-v5.1.2 (26 February 2013)
-* Bugfix: PolyNode class was missing a constructor. 
-* Update: The MiterLimit parameter in the OffsetPolygons 
-  function has been renamed Limit and can now also be used to 
-  limit the number of vertices used to construct arcs when 
-  JoinType is set to jtRound.
-
-v5.1.0 (17 February 2013)
-* Update: ExPolygons has been replaced with the PolyTree & 
-  PolyNode classes to more fully represent the parent-child 
-  relationships of the polygons returned by Clipper. 
-* Added: New CleanPolygon and CleanPolygons functions. 
-* Bugfix: Another orientation bug fixed.
-
-v5.0.2 - 30 December 2012
-* Bugfix: Significant fixes in and tidy of the internal 
-  Int128 class (which is used only when polygon coordinate 
-  values are greater than ±0x3FFFFFFF (~1.07e9)). 
-* Update: The Area algorithm has been updated and is faster. 
-* Update: Documentation updates. The newish but undocumented 
-  'CheckInputs' parameter of the OffsetPolygons function has been 
-  renamed 'AutoFix' and documented too. The comments on rounding 
-  have also been improved (ie clearer and expanded).
-
-v4.10.0 - 25 December 2012
-* Bugfix: Orientation bugs should now be resolved (finally!).
-* Bugfix: Bug in Int128 class
-
-v4.9.8 - 2 December 2012
-* Bugfix: Further fixes to rare Orientation bug.
-
-v4.9.7 - 29 November 2012
-* Bugfix: Bug that very rarely returned the wrong polygon 
-  orientation.
-* Bugfix: Obscure bug affecting OffsetPolygons when using 
-  jtRound for the JoinType parameter and when polygons also
-  contain very large coordinate values (> +/-100000000000).
-
-v4.9.6 - 9 November 2012
-* Bugfix: Another obscure bug related to joining polygons.
-
-v4.9.4 - 2 November 2012
-* Bugfix: Bugs in Int128 class occasionally causing 
-  wrong orientations.
-* Bugfix: Further fixes related to joining polygons.
-
-v4.9.0 - 9 October 2012
-* Bugfix: Obscure bug related to joining polygons.
-
-v4.8.9 - 25 September 2012
-* Bugfix: Obscure bug related to precision of intersections.
-          
-v4.8.8 - 30 August 2012
-* Bugfix: Fixed bug in OffsetPolygons function introduced in 
-  version 4.8.5.
-
-v4.8.7 - 24 August 2012
-* Bugfix: ReversePolygon function in C++ translation was broken.
-* Bugfix: Two obscure bugs affecting orientation fixed too.
-
-v4.8.6 - 11 August 2012
-* Bugfix: Potential for memory overflow errors when using 
-  ExPolygons structure.
-* Bugfix: The polygon coordinate range has been reduced to 
-  +/- 0x3FFFFFFFFFFFFFFF (4.6e18).
-* Update: ReversePolygons function was misnamed ReversePoints in C++.
-* Update: SimplifyPolygon function now takes a PolyFillType parameter.
-          
-v4.8.5 - 15 July 2012
-* Bugfix: Potential for memory overflow errors in OffsetPolygons().
-
-v4.8.4 - 1 June 2012
-* Bugfix: Another obscure bug affecting ExPolygons structure.
-
-v4.8.3 - 27 May 2012
-* Bugfix: Obscure bug causing incorrect removal of a vertex.
-
-v4.8.2 - 21 May 2012
-* Bugfix: Obscure bug could cause an exception when using 
-  ExPolygon structure.
-
-v4.8.1 - 12 May 2012
-* Update: Cody tidy and minor bug fixes.
-
-v4.8.0 - 30 April 2012
-* Bugfix: Occasional errors in orientation fixed. 
-* Update: Added notes on rounding to the documentation. 
-
-v4.7.6 - 11 April 2012
-* Fixed a bug in Orientation function (affecting C# translations only).
-* Minor documentation update.
-
-v4.7.5 - 28 March 2012
-* Bugfix: Fixed a recently introduced bug that occasionally caused an 
-  unhandled exception in C++ and C# translations. 
-
-v4.7.4 - 15 March 2012
-* Bugfix: Another minor bugfix.
-
-v4.7.2 - 4 March 2012
-* Bugfix: Fixed bug introduced in ver 4.7 which sometimes caused 
-  an exception if ExPolygon structure was passed to Clipper's 
-  Execute method. 
-
-v4.7.1 - 3 March 2012
-* Bugfix: Rare crash when JoinCommonEdges joined polygons that 
-  'cancelled' each other. 
-* Bugfix: Clipper's internal Orientation method occasionally 
-  returned wrong result. 
-* Update: Improved C# code (thanks to numerous excellent suggestions 
-  from David Piepgrass) 
-
-v4.7 - 10 February 2012
-* Improved the joining of output polygons sharing a common edge.
-
-v4.6.6 - 3 February 2012
-* Bugfix: Another obscure bug occasionally causing incorrect 
-  polygon orientation. 
-
-v4.6.5 - 17 January 2012
-* Bugfix: Obscure bug occasionally causing incorrect hole 
-  assignment in ExPolygon structure. 
-
-v4.6.4 - 8 November 2011
-* Added: SimplifyPolygon and SimplifyPolygons functions.
-
-v4.6.3 - 11 November 2011
-* Bugfix: Fixed another minor mitering bug in OffsetPolygons.
-
-v4.6.2 - 10 November 2011
-* Bugfix: Fixed a rare bug in the orientation of polygons 
-  returned by Clipper's Execute() method.
-* Bugfix: Previous update introduced a mitering bug in the
-  OffsetPolygons function.
-
-v4.6 - 29 October 2011
-* Added: Support for Positive and Negative polygon fill 
-  types (in addition to the EvenOdd and NonZero fill types).
-* Bugfix: The OffsetPolygons function was generating the 
-  occasional artefact when 'shrinking' polygons.
-
-v4.5.5 - 8 October 2011
-* Bugfix: Fixed an obscure bug in Clipper's JoinCommonEdges 
-  method. 
-* Update: Replaced IsClockwise function with Orientation 
-  function. The orientation issues affecting OffsetPolygons 
-  should now be finally resolved.
-* Change: The Area function once again returns a signed value.
- 
-v4.5.1 - 28 September 2011
-* Deleted: The UseFullCoordinateRange property has been 
-  deleted since integer range is now managed implicitly. 
-* BugFix: Minor bug in OffsetPolygon mitering. 
-* Change: C# JoinType enum moved from Clipper class to 
-  ClipperLib namespace. 
-* Change: The Area function now returns the absolute area 
-  (irrespective of orientation). 
-* Change: The IsClockwise function now requires a second 
-  parameter - YAxisPositiveUpward - to accommodate displays 
-  with Y-axis oriented in either direction
-
-v4.4.4 - 10 September 2011
-* Change: Deleted jtButt from JoinType (used by the 
-  OffsetPolygons function). 
-* BugFix: Fixed another minor bug in OffsetPolygons function. 
-* Update: Further improvements to the help file
-
-v4.4.3 - 29 August 2011
-* BugFix: fixed a minor rounding issue in OffsetPolygons 
-  function (affected C++ & C# translations). 
-* BugFix: fixed a minor bug in OffsetPolygons' function 
-  declaration (affected C++ translation only). 
-* Change: 'clipper' namespace changed to 'ClipperLib' 
-  namespace in both C++ and C# code to remove the ambiguity 
-  between the Clipper class and the namespace. (This also 
-  required numerous updates to the accompanying demos.)
-
-v4.4.2 - 26 August 2011
-* BugFix: minor bugfixes in Clipper. 
-* Update: the OffsetPolygons function has been significantly 
-  improved by offering 4 different join styles. 
-
-v4.4.0 - 6 August 2011
-* BugFix: A number of minor bugs have been fixed that mostly 
-  affected the new ExPolygons structure. 
-
-v4.3.0 - 17 June 2011
-* New: ExPolygons structure that explicitly associates 'hole' 
-  polygons with their 'outer' container polygons.
-* New: Execute method overloaded so the solution parameter 
-  can now be either Polygons or ExPolygons.  
-* BugFix: Fixed a rare bug in solution polygons orientation. 
-
-v4.2.8 - 21 May 2011
-* Update: JoinCommonEdges() improved once more. 
-* BugFix: Several minor bugs fixed. 
-
-v4.2.6 - 1 May 2011
-* Bugfix: minor bug in SlopesEqual function.
-* Update: Merging of output polygons sharing common edges 
-  has been significantly inproved
-
-v4.2.4 - 26 April 2011
-  Input polygon coordinates can now contain the full range of 
-  signed 64bit integers (ie +/-9,223,372,036,854,775,807). This 
-  means that floating point values can be converted to and from 
-  Clipper's 64bit integer coordinates structure (IntPoint) and  
-  still retain a precision of up to 18 decimal places. However, 
-  since the large-integer math that supports this expanded range 
-  imposes a small cost on performance (~15%), a new property 
-  UseFullCoordinateRange has been added to the Clipper class to 
-  allow users the choice of whether or not to use this expanded 
-  coordinate range. If this property is disabled, coordinate values 
-  are restricted to +/-1,500,000,000.
-
-v4.2 - 12 April 2011
-  JoinCommonEdges() code significantly improved plus other minor 
-  improvements.
-
-v4.1.2 - 9 April 2011
-* Update: Minor code tidy. 
-* Bugfix: Possible endless loop in JoinCommonEdges() in clipper.pas.
-
-v4.1.1 - 8 April 2011
-* Update: All polygon coordinates are now stored as 64bit integers
-  (though they're still restricted to range -1.5e9 to +1.5e9 pending 
-  the inclusion of code supporting 64bit math).
-* Change: AddPolygon and AddPolygons methods now return boolean 
-  values. 
-* Bugfix: Bug in JoinCommonEdges() caused potential endless loop. 
-* Bugfix: Bug in IsClockwise(). (C++ code only)
-
-v4.0 - 5 April 2011
-* Clipper 4 is a major rewrite of earlier versions. The biggest 
-  change is that floating point values are no longer used, 
-  except for the storing of edge slope values. The main benefit 
-  of this is the issue of numerical robustness has been 
-  addressed. Due to other major code improvements Clipper v4 
-  is approximately 40% faster than Clipper v3. 
-* The AddPolyPolygon method has been renamed to AddPolygons. 
-* The IgnoreOrientation property has been removed. 
-* The clipper_misc library has been merged back into the 
-  main clipper library.
-  
-v3.1.0 - 17 February 2011
-* Bugfix: Obscure bug in TClipperBase.SetDx method that caused 
-  problems with very small edges ( edges <1/1000th pixel in size).
-  
-v3.0.3 - 9 February 2011
-* Bugfix: Significant bug, but only in C# code.
-* Update: Minor refactoring.
-
-v3.0 - 31 January 2011
-* Update: Major rewrite of the portion of code that calculates 
-  the output polygons' orientation.
-* Update: Help file significantly improved.
-* Change: Renamed ForceOrientation property to IgnoreOrientation. 
-  If the orientation of output polygons is not important, or can 
-  be managed separately, clipping routines can be sped up by about 
-  60% by setting IgnoreOrientation to true. Defaults to false.
-* Change: The OffsetPolygon and Area functions have been moved to 
-  the new unit - clipper_misc. 
-
-2.99 - 15 January 2011
-* Bugfix: Obscure bug in AddPolygon method could cause an endless loop. 
-
-2.8 - 20 November 2010
-* Updated: Output polygons which previously shared a common 
-  edge are now merged. 
-* Changed: The orientation of outer polygons is now clockwise 
-  when the display's Y axis is positive downwards (as is 
-  typical for most Windows applications). Inner polygons 
-  (holes) have the opposite orientation.
-* Added: Support module for Cairo Graphics Library (with demo). 
-* Updated: C# and C++ demos.
-
-2.522 - 15 October 2010
-* Added C# translation (thanks to Olivier Lejeune) and 
-  a link to Ruby bindings (thanks to Mike Owens).
-
-2.0 - 30 July 2010
-* Clipper now clips using both the Even-Odd (alternate) and 
-  Non-Zero (winding) polygon filling rules. (Previously Clipper 
-  assumed the Even-Odd rule for polygon filling.)
-  
-1.4c - 16 June 2010
-* Added C++ support for AGG graphics library 
-  
-1.2s - 2 June 2010
-* Added C++ translation of clipper.pas
-
+=====================================================================
+Clipper Change Log
+=====================================================================
+
+v6.1.3 (19 January 2014)
+* Fixed potential endless loop condition when adding open 
+  paths to Clipper.
+* Fixed missing implementation of SimplifyPolygon function 
+  in C++ code.
+* Fixed incorrect upper range constant for polygon coordinates 
+  in Delphi code.
+* Added PointInPolygon function. 
+* Overloaded MinkowskiSum function to accommodate multi-contour 
+  paths.  
+
+v6.1.2 (15 December 2013)
+* Fixed broken C++ header file.
+* Minor improvement to joining polygons.
+
+v6.1.1 (13 December 2013)
+* Fixed a couple of bugs affecting open paths that could 
+  raise unhandled exceptions.
+  
+v6.1.0 (12 December 2013)
+* Deleted: Previously deprecated code has been removed. 
+* Modified: The OffsetPaths function is now deprecated as it has 
+  been replaced by the ClipperOffset class which is much more 
+  flexible. 
+* Bugfixes: Several minor bugs have been fixed including 
+  occasionally an incorrect nesting within the PolyTree structure.
+
+v6.0.0 (30 October 2013)
+* Added: Open path (polyline) clipping. A new 'Curves' demo 
+  application showcases this (see the 'Curves' directory). 
+* Update: Major improvement in the merging of 
+  shared/collinear edges in clip solutions (see Execute). 
+* Added: The IntPoint structure now has an optional 'Z' member. 
+  (See the precompiler directive use_xyz.) 
+* Added: Users can now force Clipper to use 32bit integers 
+  (via the precompiler directive use_int32) instead of using 
+  64bit integers.
+* Modified: To accommodate open paths, the Polygon and Polygons 
+  structures have been renamed Path and Paths respectively. The 
+  AddPolygon and AddPolygons methods of the ClipperBase class 
+  have been renamed AddPath and AddPaths respectively. Several 
+  other functions have been similarly renamed. 
+* Modified: The PolyNode Class has a new IsOpen property. 
+* Modified: The Clipper class has a new ZFillFunction property. 
+* Added: MinkowskiSum and MinkowskiDiff functions added. 
+* Added: Several other new functions have been added including 
+  PolyTreeToPaths, OpenPathsFromPolyTree and ClosedPathsFromPolyTree. 
+* Added: The Clipper constructor now accepts an optional InitOptions 
+  parameter to simplify setting properties. 
+* Bugfixes: Numerous minor bugs have been fixed. 
+* Deprecated: Version 6 is a major upgrade from previous versions 
+  and quite a number of changes have been made to exposed structures 
+  and functions. To minimize inconvenience to existing library users, 
+  some code has been retained and some added to maintain backward 
+  compatibility. However, because this code will be removed in a 
+  future update, it has been marked as deprecated and a precompiler 
+  directive use_deprecated has been defined.
+
+v5.1.6 (23 May 2013)
+* BugFix: CleanPolygon function was buggy.
+* Changed: The behaviour of the 'miter' JoinType has been 
+  changed so that when squaring occurs, it's no longer 
+  extended up to the miter limit but is squared off at 
+  exactly 'delta' units. (This improves the look of mitering 
+  with larger limits at acute angles.) 
+* Added: New OffsetPolyLines function
+* Update: Minor code refactoring and optimisations
+
+v5.1.5 (5 May 2013)
+* Added: ForceSimple property to Clipper class
+* Update: Improved documentation  
+
+v5.1.4 (24 March 2013)
+* Update: CleanPolygon function enhanced.
+* Update: Documentation improved.  
+
+v5.1.3 (14 March 2013)
+* Bugfix: Minor bugfixes.
+* Update: Documentation significantly improved.  
+
+v5.1.2 (26 February 2013)
+* Bugfix: PolyNode class was missing a constructor. 
+* Update: The MiterLimit parameter in the OffsetPolygons 
+  function has been renamed Limit and can now also be used to 
+  limit the number of vertices used to construct arcs when 
+  JoinType is set to jtRound.
+
+v5.1.0 (17 February 2013)
+* Update: ExPolygons has been replaced with the PolyTree & 
+  PolyNode classes to more fully represent the parent-child 
+  relationships of the polygons returned by Clipper. 
+* Added: New CleanPolygon and CleanPolygons functions. 
+* Bugfix: Another orientation bug fixed.
+
+v5.0.2 - 30 December 2012
+* Bugfix: Significant fixes in and tidy of the internal 
+  Int128 class (which is used only when polygon coordinate 
+  values are greater than ±0x3FFFFFFF (~1.07e9)). 
+* Update: The Area algorithm has been updated and is faster. 
+* Update: Documentation updates. The newish but undocumented 
+  'CheckInputs' parameter of the OffsetPolygons function has been 
+  renamed 'AutoFix' and documented too. The comments on rounding 
+  have also been improved (ie clearer and expanded).
+
+v4.10.0 - 25 December 2012
+* Bugfix: Orientation bugs should now be resolved (finally!).
+* Bugfix: Bug in Int128 class
+
+v4.9.8 - 2 December 2012
+* Bugfix: Further fixes to rare Orientation bug.
+
+v4.9.7 - 29 November 2012
+* Bugfix: Bug that very rarely returned the wrong polygon 
+  orientation.
+* Bugfix: Obscure bug affecting OffsetPolygons when using 
+  jtRound for the JoinType parameter and when polygons also
+  contain very large coordinate values (> +/-100000000000).
+
+v4.9.6 - 9 November 2012
+* Bugfix: Another obscure bug related to joining polygons.
+
+v4.9.4 - 2 November 2012
+* Bugfix: Bugs in Int128 class occasionally causing 
+  wrong orientations.
+* Bugfix: Further fixes related to joining polygons.
+
+v4.9.0 - 9 October 2012
+* Bugfix: Obscure bug related to joining polygons.
+
+v4.8.9 - 25 September 2012
+* Bugfix: Obscure bug related to precision of intersections.
+          
+v4.8.8 - 30 August 2012
+* Bugfix: Fixed bug in OffsetPolygons function introduced in 
+  version 4.8.5.
+
+v4.8.7 - 24 August 2012
+* Bugfix: ReversePolygon function in C++ translation was broken.
+* Bugfix: Two obscure bugs affecting orientation fixed too.
+
+v4.8.6 - 11 August 2012
+* Bugfix: Potential for memory overflow errors when using 
+  ExPolygons structure.
+* Bugfix: The polygon coordinate range has been reduced to 
+  +/- 0x3FFFFFFFFFFFFFFF (4.6e18).
+* Update: ReversePolygons function was misnamed ReversePoints in C++.
+* Update: SimplifyPolygon function now takes a PolyFillType parameter.
+          
+v4.8.5 - 15 July 2012
+* Bugfix: Potential for memory overflow errors in OffsetPolygons().
+
+v4.8.4 - 1 June 2012
+* Bugfix: Another obscure bug affecting ExPolygons structure.
+
+v4.8.3 - 27 May 2012
+* Bugfix: Obscure bug causing incorrect removal of a vertex.
+
+v4.8.2 - 21 May 2012
+* Bugfix: Obscure bug could cause an exception when using 
+  ExPolygon structure.
+
+v4.8.1 - 12 May 2012
+* Update: Cody tidy and minor bug fixes.
+
+v4.8.0 - 30 April 2012
+* Bugfix: Occasional errors in orientation fixed. 
+* Update: Added notes on rounding to the documentation. 
+
+v4.7.6 - 11 April 2012
+* Fixed a bug in Orientation function (affecting C# translations only).
+* Minor documentation update.
+
+v4.7.5 - 28 March 2012
+* Bugfix: Fixed a recently introduced bug that occasionally caused an 
+  unhandled exception in C++ and C# translations. 
+
+v4.7.4 - 15 March 2012
+* Bugfix: Another minor bugfix.
+
+v4.7.2 - 4 March 2012
+* Bugfix: Fixed bug introduced in ver 4.7 which sometimes caused 
+  an exception if ExPolygon structure was passed to Clipper's 
+  Execute method. 
+
+v4.7.1 - 3 March 2012
+* Bugfix: Rare crash when JoinCommonEdges joined polygons that 
+  'cancelled' each other. 
+* Bugfix: Clipper's internal Orientation method occasionally 
+  returned wrong result. 
+* Update: Improved C# code (thanks to numerous excellent suggestions 
+  from David Piepgrass) 
+
+v4.7 - 10 February 2012
+* Improved the joining of output polygons sharing a common edge.
+
+v4.6.6 - 3 February 2012
+* Bugfix: Another obscure bug occasionally causing incorrect 
+  polygon orientation. 
+
+v4.6.5 - 17 January 2012
+* Bugfix: Obscure bug occasionally causing incorrect hole 
+  assignment in ExPolygon structure. 
+
+v4.6.4 - 8 November 2011
+* Added: SimplifyPolygon and SimplifyPolygons functions.
+
+v4.6.3 - 11 November 2011
+* Bugfix: Fixed another minor mitering bug in OffsetPolygons.
+
+v4.6.2 - 10 November 2011
+* Bugfix: Fixed a rare bug in the orientation of polygons 
+  returned by Clipper's Execute() method.
+* Bugfix: Previous update introduced a mitering bug in the
+  OffsetPolygons function.
+
+v4.6 - 29 October 2011
+* Added: Support for Positive and Negative polygon fill 
+  types (in addition to the EvenOdd and NonZero fill types).
+* Bugfix: The OffsetPolygons function was generating the 
+  occasional artefact when 'shrinking' polygons.
+
+v4.5.5 - 8 October 2011
+* Bugfix: Fixed an obscure bug in Clipper's JoinCommonEdges 
+  method. 
+* Update: Replaced IsClockwise function with Orientation 
+  function. The orientation issues affecting OffsetPolygons 
+  should now be finally resolved.
+* Change: The Area function once again returns a signed value.
+ 
+v4.5.1 - 28 September 2011
+* Deleted: The UseFullCoordinateRange property has been 
+  deleted since integer range is now managed implicitly. 
+* BugFix: Minor bug in OffsetPolygon mitering. 
+* Change: C# JoinType enum moved from Clipper class to 
+  ClipperLib namespace. 
+* Change: The Area function now returns the absolute area 
+  (irrespective of orientation). 
+* Change: The IsClockwise function now requires a second 
+  parameter - YAxisPositiveUpward - to accommodate displays 
+  with Y-axis oriented in either direction
+
+v4.4.4 - 10 September 2011
+* Change: Deleted jtButt from JoinType (used by the 
+  OffsetPolygons function). 
+* BugFix: Fixed another minor bug in OffsetPolygons function. 
+* Update: Further improvements to the help file
+
+v4.4.3 - 29 August 2011
+* BugFix: fixed a minor rounding issue in OffsetPolygons 
+  function (affected C++ & C# translations). 
+* BugFix: fixed a minor bug in OffsetPolygons' function 
+  declaration (affected C++ translation only). 
+* Change: 'clipper' namespace changed to 'ClipperLib' 
+  namespace in both C++ and C# code to remove the ambiguity 
+  between the Clipper class and the namespace. (This also 
+  required numerous updates to the accompanying demos.)
+
+v4.4.2 - 26 August 2011
+* BugFix: minor bugfixes in Clipper. 
+* Update: the OffsetPolygons function has been significantly 
+  improved by offering 4 different join styles. 
+
+v4.4.0 - 6 August 2011
+* BugFix: A number of minor bugs have been fixed that mostly 
+  affected the new ExPolygons structure. 
+
+v4.3.0 - 17 June 2011
+* New: ExPolygons structure that explicitly associates 'hole' 
+  polygons with their 'outer' container polygons.
+* New: Execute method overloaded so the solution parameter 
+  can now be either Polygons or ExPolygons.  
+* BugFix: Fixed a rare bug in solution polygons orientation. 
+
+v4.2.8 - 21 May 2011
+* Update: JoinCommonEdges() improved once more. 
+* BugFix: Several minor bugs fixed. 
+
+v4.2.6 - 1 May 2011
+* Bugfix: minor bug in SlopesEqual function.
+* Update: Merging of output polygons sharing common edges 
+  has been significantly inproved
+
+v4.2.4 - 26 April 2011
+  Input polygon coordinates can now contain the full range of 
+  signed 64bit integers (ie +/-9,223,372,036,854,775,807). This 
+  means that floating point values can be converted to and from 
+  Clipper's 64bit integer coordinates structure (IntPoint) and  
+  still retain a precision of up to 18 decimal places. However, 
+  since the large-integer math that supports this expanded range 
+  imposes a small cost on performance (~15%), a new property 
+  UseFullCoordinateRange has been added to the Clipper class to 
+  allow users the choice of whether or not to use this expanded 
+  coordinate range. If this property is disabled, coordinate values 
+  are restricted to +/-1,500,000,000.
+
+v4.2 - 12 April 2011
+  JoinCommonEdges() code significantly improved plus other minor 
+  improvements.
+
+v4.1.2 - 9 April 2011
+* Update: Minor code tidy. 
+* Bugfix: Possible endless loop in JoinCommonEdges() in clipper.pas.
+
+v4.1.1 - 8 April 2011
+* Update: All polygon coordinates are now stored as 64bit integers
+  (though they're still restricted to range -1.5e9 to +1.5e9 pending 
+  the inclusion of code supporting 64bit math).
+* Change: AddPolygon and AddPolygons methods now return boolean 
+  values. 
+* Bugfix: Bug in JoinCommonEdges() caused potential endless loop. 
+* Bugfix: Bug in IsClockwise(). (C++ code only)
+
+v4.0 - 5 April 2011
+* Clipper 4 is a major rewrite of earlier versions. The biggest 
+  change is that floating point values are no longer used, 
+  except for the storing of edge slope values. The main benefit 
+  of this is the issue of numerical robustness has been 
+  addressed. Due to other major code improvements Clipper v4 
+  is approximately 40% faster than Clipper v3. 
+* The AddPolyPolygon method has been renamed to AddPolygons. 
+* The IgnoreOrientation property has been removed. 
+* The clipper_misc library has been merged back into the 
+  main clipper library.
+  
+v3.1.0 - 17 February 2011
+* Bugfix: Obscure bug in TClipperBase.SetDx method that caused 
+  problems with very small edges ( edges <1/1000th pixel in size).
+  
+v3.0.3 - 9 February 2011
+* Bugfix: Significant bug, but only in C# code.
+* Update: Minor refactoring.
+
+v3.0 - 31 January 2011
+* Update: Major rewrite of the portion of code that calculates 
+  the output polygons' orientation.
+* Update: Help file significantly improved.
+* Change: Renamed ForceOrientation property to IgnoreOrientation. 
+  If the orientation of output polygons is not important, or can 
+  be managed separately, clipping routines can be sped up by about 
+  60% by setting IgnoreOrientation to true. Defaults to false.
+* Change: The OffsetPolygon and Area functions have been moved to 
+  the new unit - clipper_misc. 
+
+2.99 - 15 January 2011
+* Bugfix: Obscure bug in AddPolygon method could cause an endless loop. 
+
+2.8 - 20 November 2010
+* Updated: Output polygons which previously shared a common 
+  edge are now merged. 
+* Changed: The orientation of outer polygons is now clockwise 
+  when the display's Y axis is positive downwards (as is 
+  typical for most Windows applications). Inner polygons 
+  (holes) have the opposite orientation.
+* Added: Support module for Cairo Graphics Library (with demo). 
+* Updated: C# and C++ demos.
+
+2.522 - 15 October 2010
+* Added C# translation (thanks to Olivier Lejeune) and 
+  a link to Ruby bindings (thanks to Mike Owens).
+
+2.0 - 30 July 2010
+* Clipper now clips using both the Even-Odd (alternate) and 
+  Non-Zero (winding) polygon filling rules. (Previously Clipper 
+  assumed the Even-Odd rule for polygon filling.)
+  
+1.4c - 16 June 2010
+* Added C++ support for AGG graphics library 
+  
+1.2s - 2 June 2010
+* Added C++ translation of clipper.pas
+
 1.0 - 9 May 2010

libs/clipper/clipper.hpp

@@ -1,398 +1,398 @@
-/*******************************************************************************
-*                                                                              *
-* Author    :  Angus Johnson                                                   *
-* Version   :  6.1.3a                                                          *
-* Date      :  22 January 2014                                                 *
-* Website   :  http://www.angusj.com                                           *
-* Copyright :  Angus Johnson 2010-2014                                         *
-*                                                                              *
-* License:                                                                     *
-* Use, modification & distribution is subject to Boost Software License Ver 1. *
-* http://www.boost.org/LICENSE_1_0.txt                                         *
-*                                                                              *
-* Attributions:                                                                *
-* The code in this library is an extension of Bala Vatti's clipping algorithm: *
-* "A generic solution to polygon clipping"                                     *
-* Communications of the ACM, Vol 35, Issue 7 (July 1992) pp 56-63.             *
-* http://portal.acm.org/citation.cfm?id=129906                                 *
-*                                                                              *
-* Computer graphics and geometric modeling: implementation and algorithms      *
-* By Max K. Agoston                                                            *
-* Springer; 1 edition (January 4, 2005)                                        *
-* http://books.google.com/books?q=vatti+clipping+agoston                       *
-*                                                                              *
-* See also:                                                                    *
-* "Polygon Offsetting by Computing Winding Numbers"                            *
-* Paper no. DETC2005-85513 pp. 565-575                                         *
-* ASME 2005 International Design Engineering Technical Conferences             *
-* and Computers and Information in Engineering Conference (IDETC/CIE2005)      *
-* September 24-28, 2005 , Long Beach, California, USA                          *
-* http://www.me.berkeley.edu/~mcmains/pubs/DAC05OffsetPolygon.pdf              *
-*                                                                              *
-*******************************************************************************/
-
-#ifndef clipper_hpp
-#define clipper_hpp
-
-#define CLIPPER_VERSION "6.1.3"
-
-//use_int32: When enabled 32bit ints are used instead of 64bit ints. This
-//improve performance but coordinate values are limited to the range +/- 46340
-//#define use_int32
-
-//use_xyz: adds a Z member to IntPoint. Adds a minor cost to perfomance.
-//#define use_xyz
-
-//use_lines: Enables line clipping. Adds a very minor cost to performance.
-//#define use_lines
-  
-//use_deprecated: Enables support for the obsolete OffsetPaths() function
-//which has been replace with the ClipperOffset class.
-#define use_deprecated  
-
-#include <vector>
-#include <set>
-#include <stdexcept>
-#include <cstring>
-#include <cstdlib>
-#include <ostream>
-#include <functional>
-
-namespace ClipperLib {
-
-enum ClipType { ctIntersection, ctUnion, ctDifference, ctXor };
-enum PolyType { ptSubject, ptClip };
-//By far the most widely used winding rules for polygon filling are
-//EvenOdd & NonZero (GDI, GDI+, XLib, OpenGL, Cairo, AGG, Quartz, SVG, Gr32)
-//Others rules include Positive, Negative and ABS_GTR_EQ_TWO (only in OpenGL)
-//see http://glprogramming.com/red/chapter11.html
-enum PolyFillType { pftEvenOdd, pftNonZero, pftPositive, pftNegative };
-
-#ifdef use_int32
-typedef int cInt;
-typedef unsigned int cUInt;
-#else
-typedef signed long long cInt;
-typedef unsigned long long cUInt;
-#endif
-
-struct IntPoint {
-  cInt X;
-  cInt Y;
-#ifdef use_xyz
-  cInt Z;
-  IntPoint(cInt x = 0, cInt y = 0, cInt z = 0): X(x), Y(y), Z(z) {};
-#else
-  IntPoint(cInt x = 0, cInt y = 0): X(x), Y(y) {};
-#endif
-
-  friend inline bool operator== (const IntPoint& a, const IntPoint& b)
-  {
-    return a.X == b.X && a.Y == b.Y;
-  }
-  friend inline bool operator!= (const IntPoint& a, const IntPoint& b)
-  {
-    return a.X != b.X  || a.Y != b.Y; 
-  }
-};
-//------------------------------------------------------------------------------
-
-typedef std::vector< IntPoint > Path;
-typedef std::vector< Path > Paths;
-
-inline Path& operator <<(Path& poly, const IntPoint& p) {poly.push_back(p); return poly;}
-inline Paths& operator <<(Paths& polys, const Path& p) {polys.push_back(p); return polys;}
-
-std::ostream& operator <<(std::ostream &s, const IntPoint &p);
-std::ostream& operator <<(std::ostream &s, const Path &p);
-std::ostream& operator <<(std::ostream &s, const Paths &p);
-
-struct DoublePoint
-{
-  double X;
-  double Y;
-  DoublePoint(double x = 0, double y = 0) : X(x), Y(y) {}
-  DoublePoint(IntPoint ip) : X((double)ip.X), Y((double)ip.Y) {}
-};
-//------------------------------------------------------------------------------
-
-#ifdef use_xyz
-typedef void (*TZFillCallback)(IntPoint& z1, IntPoint& z2, IntPoint& pt);
-#endif
-
-enum InitOptions {ioReverseSolution = 1, ioStrictlySimple = 2, ioPreserveCollinear = 4};
-enum JoinType {jtSquare, jtRound, jtMiter};
-enum EndType {etClosedPolygon, etClosedLine, etOpenButt, etOpenSquare, etOpenRound};
-#ifdef use_deprecated
-  enum EndType_ {etClosed, etButt = 2, etSquare, etRound};
-#endif
-
-class PolyNode;
-typedef std::vector< PolyNode* > PolyNodes;
-
-class PolyNode 
-{ 
-public:
-    PolyNode();
-    Path Contour;
-    PolyNodes Childs;
-    PolyNode* Parent;
-    PolyNode* GetNext() const;
-    bool IsHole() const;
-    bool IsOpen() const;
-    int ChildCount() const;
-private:
-    unsigned Index; //node index in Parent.Childs
-    bool m_IsOpen;
-    JoinType m_jointype;
-    EndType m_endtype;
-    PolyNode* GetNextSiblingUp() const;
-    void AddChild(PolyNode& child);
-    friend class Clipper; //to access Index
-    friend class ClipperOffset; 
-};
-
-class PolyTree: public PolyNode
-{ 
-public:
-    ~PolyTree(){Clear();};
-    PolyNode* GetFirst() const;
-    void Clear();
-    int Total() const;
-private:
-    PolyNodes AllNodes;
-    friend class Clipper; //to access AllNodes
-};
-
-bool Orientation(const Path &poly);
-double Area(const Path &poly);
-int PointInPolygon(const IntPoint &pt, const Path &path);
-
-#ifdef use_deprecated
-  void OffsetPaths(const Paths &in_polys, Paths &out_polys,
-    double delta, JoinType jointype, EndType_ endtype, double limit = 0);
-#endif
-
-void SimplifyPolygon(const Path &in_poly, Paths &out_polys, PolyFillType fillType = pftEvenOdd);
-void SimplifyPolygons(const Paths &in_polys, Paths &out_polys, PolyFillType fillType = pftEvenOdd);
-void SimplifyPolygons(Paths &polys, PolyFillType fillType = pftEvenOdd);
-
-void CleanPolygon(const Path& in_poly, Path& out_poly, double distance = 1.415);
-void CleanPolygon(Path& poly, double distance = 1.415);
-void CleanPolygons(const Paths& in_polys, Paths& out_polys, double distance = 1.415);
-void CleanPolygons(Paths& polys, double distance = 1.415);
-
-void MinkowskiSum(const Path& pattern, const Path& path, Paths& solution, bool pathIsClosed);
-void MinkowskiSum(const Path& pattern, const Paths& paths, 
-  Paths& solution, PolyFillType pathFillType, bool pathIsClosed);
-void MinkowskiDiff(const Path& poly1, const Path& poly2, Paths& solution);
-
-void PolyTreeToPaths(const PolyTree& polytree, Paths& paths);
-void ClosedPathsFromPolyTree(const PolyTree& polytree, Paths& paths);
-void OpenPathsFromPolyTree(PolyTree& polytree, Paths& paths);
-
-void ReversePath(Path& p);
-void ReversePaths(Paths& p);
-
-struct IntRect { cInt left; cInt top; cInt right; cInt bottom; };
-
-//enums that are used internally ...
-enum EdgeSide { esLeft = 1, esRight = 2};
-
-//forward declarations (for stuff used internally) ...
-struct TEdge;
-struct IntersectNode;
-struct LocalMinima;
-struct Scanbeam;
-struct OutPt;
-struct OutRec;
-struct Join;
-
-typedef std::vector < OutRec* > PolyOutList;
-typedef std::vector < TEdge* > EdgeList;
-typedef std::vector < Join* > JoinList;
-typedef std::vector < IntersectNode* > IntersectList;
-
-
-//------------------------------------------------------------------------------
-
-//ClipperBase is the ancestor to the Clipper class. It should not be
-//instantiated directly. This class simply abstracts the conversion of sets of
-//polygon coordinates into edge objects that are stored in a LocalMinima list.
-class ClipperBase
-{
-public:
-  ClipperBase();
-  virtual ~ClipperBase();
-  bool AddPath(const Path &pg, PolyType PolyTyp, bool Closed);
-  bool AddPaths(const Paths &ppg, PolyType PolyTyp, bool Closed);
-  virtual void Clear();
-  IntRect GetBounds();
-  bool PreserveCollinear() {return m_PreserveCollinear;};
-  void PreserveCollinear(bool value) {m_PreserveCollinear = value;};
-protected:
-  void DisposeLocalMinimaList();
-  TEdge* AddBoundsToLML(TEdge *e, bool IsClosed);
-  void PopLocalMinima();
-  virtual void Reset();
-  TEdge* ProcessBound(TEdge* E, bool IsClockwise);
-  void InsertLocalMinima(LocalMinima *newLm);
-  void DoMinimaLML(TEdge* E1, TEdge* E2, bool IsClosed);
-  TEdge* DescendToMin(TEdge *&E);
-  void AscendToMax(TEdge *&E, bool Appending, bool IsClosed);
-  LocalMinima      *m_CurrentLM;
-  LocalMinima      *m_MinimaList;
-  bool              m_UseFullRange;
-  EdgeList          m_edges;
-  bool             m_PreserveCollinear;
-  bool             m_HasOpenPaths;
-};
-//------------------------------------------------------------------------------
-
-class Clipper : public virtual ClipperBase
-{
-public:
-  Clipper(int initOptions = 0);
-  ~Clipper();
-  bool Execute(ClipType clipType,
-    Paths &solution,
-    PolyFillType subjFillType = pftEvenOdd,
-    PolyFillType clipFillType = pftEvenOdd);
-  bool Execute(ClipType clipType,
-    PolyTree &polytree,
-    PolyFillType subjFillType = pftEvenOdd,
-    PolyFillType clipFillType = pftEvenOdd);
-  bool ReverseSolution() {return m_ReverseOutput;};
-  void ReverseSolution(bool value) {m_ReverseOutput = value;};
-  bool StrictlySimple() {return m_StrictSimple;};
-  void StrictlySimple(bool value) {m_StrictSimple = value;};
-  //set the callback function for z value filling on intersections (otherwise Z is 0)
-#ifdef use_xyz
-  void ZFillFunction(TZFillCallback zFillFunc);
-#endif
-protected:
-  void Reset();
-  virtual bool ExecuteInternal();
-private:
-  PolyOutList       m_PolyOuts;
-  JoinList          m_Joins;
-  JoinList          m_GhostJoins;
-  IntersectList     m_IntersectList;
-  ClipType          m_ClipType;
-  std::set< cInt, std::greater<cInt> > m_Scanbeam;
-  TEdge           *m_ActiveEdges;
-  TEdge           *m_SortedEdges;
-  bool             m_ExecuteLocked;
-  PolyFillType     m_ClipFillType;
-  PolyFillType     m_SubjFillType;
-  bool             m_ReverseOutput;
-  bool             m_UsingPolyTree; 
-  bool             m_StrictSimple;
-#ifdef use_xyz
-  TZFillCallback   m_ZFill; //custom callback 
-#endif
-  void SetWindingCount(TEdge& edge);
-  bool IsEvenOddFillType(const TEdge& edge) const;
-  bool IsEvenOddAltFillType(const TEdge& edge) const;
-  void InsertScanbeam(const cInt Y);
-  cInt PopScanbeam();
-  void InsertLocalMinimaIntoAEL(const cInt botY);
-  void InsertEdgeIntoAEL(TEdge *edge, TEdge* startEdge);
-  void AddEdgeToSEL(TEdge *edge);
-  void CopyAELToSEL();
-  void DeleteFromSEL(TEdge *e);
-  void DeleteFromAEL(TEdge *e);
-  void UpdateEdgeIntoAEL(TEdge *&e);
-  void SwapPositionsInSEL(TEdge *edge1, TEdge *edge2);
-  bool IsContributing(const TEdge& edge) const;
-  bool IsTopHorz(const cInt XPos);
-  void SwapPositionsInAEL(TEdge *edge1, TEdge *edge2);
-  void DoMaxima(TEdge *e);
-  void PrepareHorzJoins(TEdge* horzEdge, bool isTopOfScanbeam);
-  void ProcessHorizontals(bool IsTopOfScanbeam);
-  void ProcessHorizontal(TEdge *horzEdge, bool isTopOfScanbeam);
-  void AddLocalMaxPoly(TEdge *e1, TEdge *e2, const IntPoint &pt);
-  OutPt* AddLocalMinPoly(TEdge *e1, TEdge *e2, const IntPoint &pt);
-  OutRec* GetOutRec(int idx);
-  void AppendPolygon(TEdge *e1, TEdge *e2);
-  void IntersectEdges(TEdge *e1, TEdge *e2,
-    const IntPoint &pt, bool protect = false);
-  OutRec* CreateOutRec();
-  OutPt* AddOutPt(TEdge *e, const IntPoint &pt);
-  void DisposeAllOutRecs();
-  void DisposeOutRec(PolyOutList::size_type index);
-  bool ProcessIntersections(const cInt botY, const cInt topY);
-  void BuildIntersectList(const cInt botY, const cInt topY);
-  void ProcessIntersectList();
-  void ProcessEdgesAtTopOfScanbeam(const cInt topY);
-  void BuildResult(Paths& polys);
-  void BuildResult2(PolyTree& polytree);
-  void SetHoleState(TEdge *e, OutRec *outrec);
-  void DisposeIntersectNodes();
-  bool FixupIntersectionOrder();
-  void FixupOutPolygon(OutRec &outrec);
-  bool IsHole(TEdge *e);
-  bool FindOwnerFromSplitRecs(OutRec &outRec, OutRec *&currOrfl);
-  void FixHoleLinkage(OutRec &outrec);
-  void AddJoin(OutPt *op1, OutPt *op2, const IntPoint offPt);
-  void ClearJoins();
-  void ClearGhostJoins();
-  void AddGhostJoin(OutPt *op, const IntPoint offPt);
-  bool JoinPoints(Join *j, OutRec* outRec1, OutRec* outRec2);
-  void JoinCommonEdges();
-  void DoSimplePolygons();
-  void FixupFirstLefts1(OutRec* OldOutRec, OutRec* NewOutRec);
-  void FixupFirstLefts2(OutRec* OldOutRec, OutRec* NewOutRec);
-#ifdef use_xyz
-  void SetZ(IntPoint& pt, TEdge& e);
-#endif
-};
-//------------------------------------------------------------------------------
-
-class ClipperOffset 
-{
-public:
-  ClipperOffset(double miterLimit = 2.0, double roundPrecision = 0.25);
-  ~ClipperOffset();
-  void AddPath(const Path& path, JoinType joinType, EndType endType);
-  void AddPaths(const Paths& paths, JoinType joinType, EndType endType);
-  void Execute(Paths& solution, double delta);
-  void Execute(PolyTree& solution, double delta);
-  void Clear();
-  double MiterLimit;
-  double ArcTolerance;
-private:
-  Paths m_destPolys;
-  Path m_srcPoly;
-  Path m_destPoly;
-  std::vector<DoublePoint> m_normals;
-  double m_delta, m_sinA, m_sin, m_cos;
-  double m_miterLim, m_StepsPerRad;
-  IntPoint m_lowest;
-  PolyNode m_polyNodes;
-
-  void FixOrientations();
-  void DoOffset(double delta);
-  void OffsetPoint(int j, int& k, JoinType jointype);
-  void DoSquare(int j, int k);
-  void DoMiter(int j, int k, double r);
-  void DoRound(int j, int k);
-};
-//------------------------------------------------------------------------------
-
-class clipperException : public std::exception
-{
-  public:
-    clipperException(const char* description): m_descr(description) {}
-    virtual ~clipperException() throw() {}
-    virtual const char* what() const throw() {return m_descr.c_str();}
-  private:
-    std::string m_descr;
-};
-//------------------------------------------------------------------------------
-
-} //ClipperLib namespace
-
-#endif //clipper_hpp
-
-
+/*******************************************************************************
+*                                                                              *
+* Author    :  Angus Johnson                                                   *
+* Version   :  6.1.3a                                                          *
+* Date      :  22 January 2014                                                 *
+* Website   :  http://www.angusj.com                                           *
+* Copyright :  Angus Johnson 2010-2014                                         *
+*                                                                              *
+* License:                                                                     *
+* Use, modification & distribution is subject to Boost Software License Ver 1. *
+* http://www.boost.org/LICENSE_1_0.txt                                         *
+*                                                                              *
+* Attributions:                                                                *
+* The code in this library is an extension of Bala Vatti's clipping algorithm: *
+* "A generic solution to polygon clipping"                                     *
+* Communications of the ACM, Vol 35, Issue 7 (July 1992) pp 56-63.             *
+* http://portal.acm.org/citation.cfm?id=129906                                 *
+*                                                                              *
+* Computer graphics and geometric modeling: implementation and algorithms      *
+* By Max K. Agoston                                                            *
+* Springer; 1 edition (January 4, 2005)                                        *
+* http://books.google.com/books?q=vatti+clipping+agoston                       *
+*                                                                              *
+* See also:                                                                    *
+* "Polygon Offsetting by Computing Winding Numbers"                            *
+* Paper no. DETC2005-85513 pp. 565-575                                         *
+* ASME 2005 International Design Engineering Technical Conferences             *
+* and Computers and Information in Engineering Conference (IDETC/CIE2005)      *
+* September 24-28, 2005 , Long Beach, California, USA                          *
+* http://www.me.berkeley.edu/~mcmains/pubs/DAC05OffsetPolygon.pdf              *
+*                                                                              *
+*******************************************************************************/
+
+#ifndef clipper_hpp
+#define clipper_hpp
+
+#define CLIPPER_VERSION "6.1.3"
+
+//use_int32: When enabled 32bit ints are used instead of 64bit ints. This
+//improve performance but coordinate values are limited to the range +/- 46340
+//#define use_int32
+
+//use_xyz: adds a Z member to IntPoint. Adds a minor cost to perfomance.
+//#define use_xyz
+
+//use_lines: Enables line clipping. Adds a very minor cost to performance.
+//#define use_lines
+  
+//use_deprecated: Enables support for the obsolete OffsetPaths() function
+//which has been replace with the ClipperOffset class.
+#define use_deprecated  
+
+#include <vector>
+#include <set>
+#include <stdexcept>
+#include <cstring>
+#include <cstdlib>
+#include <ostream>
+#include <functional>
+
+namespace ClipperLib {
+
+enum ClipType { ctIntersection, ctUnion, ctDifference, ctXor };
+enum PolyType { ptSubject, ptClip };
+//By far the most widely used winding rules for polygon filling are
+//EvenOdd & NonZero (GDI, GDI+, XLib, OpenGL, Cairo, AGG, Quartz, SVG, Gr32)
+//Others rules include Positive, Negative and ABS_GTR_EQ_TWO (only in OpenGL)
+//see http://glprogramming.com/red/chapter11.html
+enum PolyFillType { pftEvenOdd, pftNonZero, pftPositive, pftNegative };
+
+#ifdef use_int32
+typedef int cInt;
+typedef unsigned int cUInt;
+#else
+typedef signed long long cInt;
+typedef unsigned long long cUInt;
+#endif
+
+struct IntPoint {
+  cInt X;
+  cInt Y;
+#ifdef use_xyz
+  cInt Z;
+  IntPoint(cInt x = 0, cInt y = 0, cInt z = 0): X(x), Y(y), Z(z) {};
+#else
+  IntPoint(cInt x = 0, cInt y = 0): X(x), Y(y) {};
+#endif
+
+  friend inline bool operator== (const IntPoint& a, const IntPoint& b)
+  {
+    return a.X == b.X && a.Y == b.Y;
+  }
+  friend inline bool operator!= (const IntPoint& a, const IntPoint& b)
+  {
+    return a.X != b.X  || a.Y != b.Y; 
+  }
+};
+//------------------------------------------------------------------------------
+
+typedef std::vector< IntPoint > Path;
+typedef std::vector< Path > Paths;
+
+inline Path& operator <<(Path& poly, const IntPoint& p) {poly.push_back(p); return poly;}
+inline Paths& operator <<(Paths& polys, const Path& p) {polys.push_back(p); return polys;}
+
+std::ostream& operator <<(std::ostream &s, const IntPoint &p);
+std::ostream& operator <<(std::ostream &s, const Path &p);
+std::ostream& operator <<(std::ostream &s, const Paths &p);
+
+struct DoublePoint
+{
+  double X;
+  double Y;
+  DoublePoint(double x = 0, double y = 0) : X(x), Y(y) {}
+  DoublePoint(IntPoint ip) : X((double)ip.X), Y((double)ip.Y) {}
+};
+//------------------------------------------------------------------------------
+
+#ifdef use_xyz
+typedef void (*TZFillCallback)(IntPoint& z1, IntPoint& z2, IntPoint& pt);
+#endif
+
+enum InitOptions {ioReverseSolution = 1, ioStrictlySimple = 2, ioPreserveCollinear = 4};
+enum JoinType {jtSquare, jtRound, jtMiter};
+enum EndType {etClosedPolygon, etClosedLine, etOpenButt, etOpenSquare, etOpenRound};
+#ifdef use_deprecated
+  enum EndType_ {etClosed, etButt = 2, etSquare, etRound};
+#endif
+
+class PolyNode;
+typedef std::vector< PolyNode* > PolyNodes;
+
+class PolyNode 
+{ 
+public:
+    PolyNode();
+    Path Contour;
+    PolyNodes Childs;
+    PolyNode* Parent;
+    PolyNode* GetNext() const;
+    bool IsHole() const;
+    bool IsOpen() const;
+    int ChildCount() const;
+private:
+    unsigned Index; //node index in Parent.Childs
+    bool m_IsOpen;
+    JoinType m_jointype;
+    EndType m_endtype;
+    PolyNode* GetNextSiblingUp() const;
+    void AddChild(PolyNode& child);
+    friend class Clipper; //to access Index
+    friend class ClipperOffset; 
+};
+
+class PolyTree: public PolyNode
+{ 
+public:
+    ~PolyTree(){Clear();};
+    PolyNode* GetFirst() const;
+    void Clear();
+    int Total() const;
+private:
+    PolyNodes AllNodes;
+    friend class Clipper; //to access AllNodes
+};
+
+bool Orientation(const Path &poly);
+double Area(const Path &poly);
+int PointInPolygon(const IntPoint &pt, const Path &path);
+
+#ifdef use_deprecated
+  void OffsetPaths(const Paths &in_polys, Paths &out_polys,
+    double delta, JoinType jointype, EndType_ endtype, double limit = 0);
+#endif
+
+void SimplifyPolygon(const Path &in_poly, Paths &out_polys, PolyFillType fillType = pftEvenOdd);
+void SimplifyPolygons(const Paths &in_polys, Paths &out_polys, PolyFillType fillType = pftEvenOdd);
+void SimplifyPolygons(Paths &polys, PolyFillType fillType = pftEvenOdd);
+
+void CleanPolygon(const Path& in_poly, Path& out_poly, double distance = 1.415);
+void CleanPolygon(Path& poly, double distance = 1.415);
+void CleanPolygons(const Paths& in_polys, Paths& out_polys, double distance = 1.415);
+void CleanPolygons(Paths& polys, double distance = 1.415);
+
+void MinkowskiSum(const Path& pattern, const Path& path, Paths& solution, bool pathIsClosed);
+void MinkowskiSum(const Path& pattern, const Paths& paths, 
+  Paths& solution, PolyFillType pathFillType, bool pathIsClosed);
+void MinkowskiDiff(const Path& poly1, const Path& poly2, Paths& solution);
+
+void PolyTreeToPaths(const PolyTree& polytree, Paths& paths);
+void ClosedPathsFromPolyTree(const PolyTree& polytree, Paths& paths);
+void OpenPathsFromPolyTree(PolyTree& polytree, Paths& paths);
+
+void ReversePath(Path& p);
+void ReversePaths(Paths& p);
+
+struct IntRect { cInt left; cInt top; cInt right; cInt bottom; };
+
+//enums that are used internally ...
+enum EdgeSide { esLeft = 1, esRight = 2};
+
+//forward declarations (for stuff used internally) ...
+struct TEdge;
+struct IntersectNode;
+struct LocalMinima;
+struct Scanbeam;
+struct OutPt;
+struct OutRec;
+struct Join;
+
+typedef std::vector < OutRec* > PolyOutList;
+typedef std::vector < TEdge* > EdgeList;
+typedef std::vector < Join* > JoinList;
+typedef std::vector < IntersectNode* > IntersectList;
+
+
+//------------------------------------------------------------------------------
+
+//ClipperBase is the ancestor to the Clipper class. It should not be
+//instantiated directly. This class simply abstracts the conversion of sets of
+//polygon coordinates into edge objects that are stored in a LocalMinima list.
+class ClipperBase
+{
+public:
+  ClipperBase();
+  virtual ~ClipperBase();
+  bool AddPath(const Path &pg, PolyType PolyTyp, bool Closed);
+  bool AddPaths(const Paths &ppg, PolyType PolyTyp, bool Closed);
+  virtual void Clear();
+  IntRect GetBounds();
+  bool PreserveCollinear() {return m_PreserveCollinear;};
+  void PreserveCollinear(bool value) {m_PreserveCollinear = value;};
+protected:
+  void DisposeLocalMinimaList();
+  TEdge* AddBoundsToLML(TEdge *e, bool IsClosed);
+  void PopLocalMinima();
+  virtual void Reset();
+  TEdge* ProcessBound(TEdge* E, bool IsClockwise);
+  void InsertLocalMinima(LocalMinima *newLm);
+  void DoMinimaLML(TEdge* E1, TEdge* E2, bool IsClosed);
+  TEdge* DescendToMin(TEdge *&E);
+  void AscendToMax(TEdge *&E, bool Appending, bool IsClosed);
+  LocalMinima      *m_CurrentLM;
+  LocalMinima      *m_MinimaList;
+  bool              m_UseFullRange;
+  EdgeList          m_edges;
+  bool             m_PreserveCollinear;
+  bool             m_HasOpenPaths;
+};
+//------------------------------------------------------------------------------
+
+class Clipper : public virtual ClipperBase
+{
+public:
+  Clipper(int initOptions = 0);
+  ~Clipper();
+  bool Execute(ClipType clipType,
+    Paths &solution,
+    PolyFillType subjFillType = pftEvenOdd,
+    PolyFillType clipFillType = pftEvenOdd);
+  bool Execute(ClipType clipType,
+    PolyTree &polytree,
+    PolyFillType subjFillType = pftEvenOdd,
+    PolyFillType clipFillType = pftEvenOdd);
+  bool ReverseSolution() {return m_ReverseOutput;};
+  void ReverseSolution(bool value) {m_ReverseOutput = value;};
+  bool StrictlySimple() {return m_StrictSimple;};
+  void StrictlySimple(bool value) {m_StrictSimple = value;};
+  //set the callback function for z value filling on intersections (otherwise Z is 0)
+#ifdef use_xyz
+  void ZFillFunction(TZFillCallback zFillFunc);
+#endif
+protected:
+  void Reset();
+  virtual bool ExecuteInternal();
+private:
+  PolyOutList       m_PolyOuts;
+  JoinList          m_Joins;
+  JoinList          m_GhostJoins;
+  IntersectList     m_IntersectList;
+  ClipType          m_ClipType;
+  std::set< cInt, std::greater<cInt> > m_Scanbeam;
+  TEdge           *m_ActiveEdges;
+  TEdge           *m_SortedEdges;
+  bool             m_ExecuteLocked;
+  PolyFillType     m_ClipFillType;
+  PolyFillType     m_SubjFillType;
+  bool             m_ReverseOutput;
+  bool             m_UsingPolyTree; 
+  bool             m_StrictSimple;
+#ifdef use_xyz
+  TZFillCallback   m_ZFill; //custom callback 
+#endif
+  void SetWindingCount(TEdge& edge);
+  bool IsEvenOddFillType(const TEdge& edge) const;
+  bool IsEvenOddAltFillType(const TEdge& edge) const;
+  void InsertScanbeam(const cInt Y);
+  cInt PopScanbeam();
+  void InsertLocalMinimaIntoAEL(const cInt botY);
+  void InsertEdgeIntoAEL(TEdge *edge, TEdge* startEdge);
+  void AddEdgeToSEL(TEdge *edge);
+  void CopyAELToSEL();
+  void DeleteFromSEL(TEdge *e);
+  void DeleteFromAEL(TEdge *e);
+  void UpdateEdgeIntoAEL(TEdge *&e);
+  void SwapPositionsInSEL(TEdge *edge1, TEdge *edge2);
+  bool IsContributing(const TEdge& edge) const;
+  bool IsTopHorz(const cInt XPos);
+  void SwapPositionsInAEL(TEdge *edge1, TEdge *edge2);
+  void DoMaxima(TEdge *e);
+  void PrepareHorzJoins(TEdge* horzEdge, bool isTopOfScanbeam);
+  void ProcessHorizontals(bool IsTopOfScanbeam);
+  void ProcessHorizontal(TEdge *horzEdge, bool isTopOfScanbeam);
+  void AddLocalMaxPoly(TEdge *e1, TEdge *e2, const IntPoint &pt);
+  OutPt* AddLocalMinPoly(TEdge *e1, TEdge *e2, const IntPoint &pt);
+  OutRec* GetOutRec(int idx);
+  void AppendPolygon(TEdge *e1, TEdge *e2);
+  void IntersectEdges(TEdge *e1, TEdge *e2,
+    const IntPoint &pt, bool protect = false);
+  OutRec* CreateOutRec();
+  OutPt* AddOutPt(TEdge *e, const IntPoint &pt);
+  void DisposeAllOutRecs();
+  void DisposeOutRec(PolyOutList::size_type index);
+  bool ProcessIntersections(const cInt botY, const cInt topY);
+  void BuildIntersectList(const cInt botY, const cInt topY);
+  void ProcessIntersectList();
+  void ProcessEdgesAtTopOfScanbeam(const cInt topY);
+  void BuildResult(Paths& polys);
+  void BuildResult2(PolyTree& polytree);
+  void SetHoleState(TEdge *e, OutRec *outrec);
+  void DisposeIntersectNodes();
+  bool FixupIntersectionOrder();
+  void FixupOutPolygon(OutRec &outrec);
+  bool IsHole(TEdge *e);
+  bool FindOwnerFromSplitRecs(OutRec &outRec, OutRec *&currOrfl);
+  void FixHoleLinkage(OutRec &outrec);
+  void AddJoin(OutPt *op1, OutPt *op2, const IntPoint offPt);
+  void ClearJoins();
+  void ClearGhostJoins();
+  void AddGhostJoin(OutPt *op, const IntPoint offPt);
+  bool JoinPoints(Join *j, OutRec* outRec1, OutRec* outRec2);
+  void JoinCommonEdges();
+  void DoSimplePolygons();
+  void FixupFirstLefts1(OutRec* OldOutRec, OutRec* NewOutRec);
+  void FixupFirstLefts2(OutRec* OldOutRec, OutRec* NewOutRec);
+#ifdef use_xyz
+  void SetZ(IntPoint& pt, TEdge& e);
+#endif
+};
+//------------------------------------------------------------------------------
+
+class ClipperOffset 
+{
+public:
+  ClipperOffset(double miterLimit = 2.0, double roundPrecision = 0.25);
+  ~ClipperOffset();
+  void AddPath(const Path& path, JoinType joinType, EndType endType);
+  void AddPaths(const Paths& paths, JoinType joinType, EndType endType);
+  void Execute(Paths& solution, double delta);
+  void Execute(PolyTree& solution, double delta);
+  void Clear();
+  double MiterLimit;
+  double ArcTolerance;
+private:
+  Paths m_destPolys;
+  Path m_srcPoly;
+  Path m_destPoly;
+  std::vector<DoublePoint> m_normals;
+  double m_delta, m_sinA, m_sin, m_cos;
+  double m_miterLim, m_StepsPerRad;
+  IntPoint m_lowest;
+  PolyNode m_polyNodes;
+
+  void FixOrientations();
+  void DoOffset(double delta);
+  void OffsetPoint(int j, int& k, JoinType jointype);
+  void DoSquare(int j, int k);
+  void DoMiter(int j, int k, double r);
+  void DoRound(int j, int k);
+};
+//------------------------------------------------------------------------------
+
+class clipperException : public std::exception
+{
+  public:
+    clipperException(const char* description): m_descr(description) {}
+    virtual ~clipperException() throw() {}
+    virtual const char* what() const throw() {return m_descr.c_str();}
+  private:
+    std::string m_descr;
+};
+//------------------------------------------------------------------------------
+
+} //ClipperLib namespace
+
+#endif //clipper_hpp
+
+

libs/rapidjson/allocators.h

@@ -0,0 +1,249 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_ALLOCATORS_H_
+#define RAPIDJSON_ALLOCATORS_H_
+
+#include "rapidjson.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+///////////////////////////////////////////////////////////////////////////////
+// Allocator
+
+/*! \class rapidjson::Allocator
+    \brief Concept for allocating, resizing and freeing memory block.
+    
+    Note that Malloc() and Realloc() are non-static but Free() is static.
+    
+    So if an allocator need to support Free(), it needs to put its pointer in 
+    the header of memory block.
+
+\code
+concept Allocator {
+    static const bool kNeedFree;    //!< Whether this allocator needs to call Free().
+
+    // Allocate a memory block.
+    // \param size of the memory block in bytes.
+    // \returns pointer to the memory block.
+    void* Malloc(size_t size);
+
+    // Resize a memory block.
+    // \param originalPtr The pointer to current memory block. Null pointer is permitted.
+    // \param originalSize The current size in bytes. (Design issue: since some allocator may not book-keep this, explicitly pass to it can save memory.)
+    // \param newSize the new size in bytes.
+    void* Realloc(void* originalPtr, size_t originalSize, size_t newSize);
+
+    // Free a memory block.
+    // \param pointer to the memory block. Null pointer is permitted.
+    static void Free(void *ptr);
+};
+\endcode
+*/
+
+///////////////////////////////////////////////////////////////////////////////
+// CrtAllocator
+
+//! C-runtime library allocator.
+/*! This class is just wrapper for standard C library memory routines.
+    \note implements Allocator concept
+*/
+class CrtAllocator {
+public:
+    static const bool kNeedFree = true;
+    void* Malloc(size_t size) { 
+        if (size) //  behavior of malloc(0) is implementation defined.
+            return std::malloc(size);
+        else
+            return NULL; // standardize to returning NULL.
+    }
+    void* Realloc(void* originalPtr, size_t originalSize, size_t newSize) { (void)originalSize; return std::realloc(originalPtr, newSize); }
+    static void Free(void *ptr) { std::free(ptr); }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// MemoryPoolAllocator
+
+//! Default memory allocator used by the parser and DOM.
+/*! This allocator allocate memory blocks from pre-allocated memory chunks. 
+
+    It does not free memory blocks. And Realloc() only allocate new memory.
+
+    The memory chunks are allocated by BaseAllocator, which is CrtAllocator by default.
+
+    User may also supply a buffer as the first chunk.
+
+    If the user-buffer is full then additional chunks are allocated by BaseAllocator.
+
+    The user-buffer is not deallocated by this allocator.
+
+    \tparam BaseAllocator the allocator type for allocating memory chunks. Default is CrtAllocator.
+    \note implements Allocator concept
+*/
+template <typename BaseAllocator = CrtAllocator>
+class MemoryPoolAllocator {
+public:
+    static const bool kNeedFree = false;    //!< Tell users that no need to call Free() with this allocator. (concept Allocator)
+
+    //! Constructor with chunkSize.
+    /*! \param chunkSize The size of memory chunk. The default is kDefaultChunkSize.
+        \param baseAllocator The allocator for allocating memory chunks.
+    */
+    MemoryPoolAllocator(size_t chunkSize = kDefaultChunkCapacity, BaseAllocator* baseAllocator = 0) : 
+        chunkHead_(0), chunk_capacity_(chunkSize), userBuffer_(0), baseAllocator_(baseAllocator), ownBaseAllocator_(0)
+    {
+    }
+
+    //! Constructor with user-supplied buffer.
+    /*! The user buffer will be used firstly. When it is full, memory pool allocates new chunk with chunk size.
+
+        The user buffer will not be deallocated when this allocator is destructed.
+
+        \param buffer User supplied buffer.
+        \param size Size of the buffer in bytes. It must at least larger than sizeof(ChunkHeader).
+        \param chunkSize The size of memory chunk. The default is kDefaultChunkSize.
+        \param baseAllocator The allocator for allocating memory chunks.
+    */
+    MemoryPoolAllocator(void *buffer, size_t size, size_t chunkSize = kDefaultChunkCapacity, BaseAllocator* baseAllocator = 0) :
+        chunkHead_(0), chunk_capacity_(chunkSize), userBuffer_(buffer), baseAllocator_(baseAllocator), ownBaseAllocator_(0)
+    {
+        RAPIDJSON_ASSERT(buffer != 0);
+        RAPIDJSON_ASSERT(size > sizeof(ChunkHeader));
+        chunkHead_ = reinterpret_cast<ChunkHeader*>(buffer);
+        chunkHead_->capacity = size - sizeof(ChunkHeader);
+        chunkHead_->size = 0;
+        chunkHead_->next = 0;
+    }
+
+    //! Destructor.
+    /*! This deallocates all memory chunks, excluding the user-supplied buffer.
+    */
+    ~MemoryPoolAllocator() {
+        Clear();
+        RAPIDJSON_DELETE(ownBaseAllocator_);
+    }
+
+    //! Deallocates all memory chunks, excluding the user-supplied buffer.
+    void Clear() {
+        while(chunkHead_ != 0 && chunkHead_ != userBuffer_) {
+            ChunkHeader* next = chunkHead_->next;
+            baseAllocator_->Free(chunkHead_);
+            chunkHead_ = next;
+        }
+    }
+
+    //! Computes the total capacity of allocated memory chunks.
+    /*! \return total capacity in bytes.
+    */
+    size_t Capacity() const {
+        size_t capacity = 0;
+        for (ChunkHeader* c = chunkHead_; c != 0; c = c->next)
+            capacity += c->capacity;
+        return capacity;
+    }
+
+    //! Computes the memory blocks allocated.
+    /*! \return total used bytes.
+    */
+    size_t Size() const {
+        size_t size = 0;
+        for (ChunkHeader* c = chunkHead_; c != 0; c = c->next)
+            size += c->size;
+        return size;
+    }
+
+    //! Allocates a memory block. (concept Allocator)
+    void* Malloc(size_t size) {
+        if (!size)
+            return NULL;
+
+        size = RAPIDJSON_ALIGN(size);
+        if (chunkHead_ == 0 || chunkHead_->size + size > chunkHead_->capacity)
+            AddChunk(chunk_capacity_ > size ? chunk_capacity_ : size);
+
+        void *buffer = reinterpret_cast<char *>(chunkHead_ + 1) + chunkHead_->size;
+        chunkHead_->size += size;
+        return buffer;
+    }
+
+    //! Resizes a memory block (concept Allocator)
+    void* Realloc(void* originalPtr, size_t originalSize, size_t newSize) {
+        if (originalPtr == 0)
+            return Malloc(newSize);
+
+        // Do not shrink if new size is smaller than original
+        if (originalSize >= newSize)
+            return originalPtr;
+
+        // Simply expand it if it is the last allocation and there is sufficient space
+        if (originalPtr == (char *)(chunkHead_ + 1) + chunkHead_->size - originalSize) {
+            size_t increment = static_cast<size_t>(newSize - originalSize);
+            increment = RAPIDJSON_ALIGN(increment);
+            if (chunkHead_->size + increment <= chunkHead_->capacity) {
+                chunkHead_->size += increment;
+                return originalPtr;
+            }
+        }
+
+        // Realloc process: allocate and copy memory, do not free original buffer.
+        void* newBuffer = Malloc(newSize);
+        RAPIDJSON_ASSERT(newBuffer != 0);   // Do not handle out-of-memory explicitly.
+        if (originalSize)
+            std::memcpy(newBuffer, originalPtr, originalSize);
+        return newBuffer;
+    }
+
+    //! Frees a memory block (concept Allocator)
+    static void Free(void *ptr) { (void)ptr; } // Do nothing
+
+private:
+    //! Copy constructor is not permitted.
+    MemoryPoolAllocator(const MemoryPoolAllocator& rhs) /* = delete */;
+    //! Copy assignment operator is not permitted.
+    MemoryPoolAllocator& operator=(const MemoryPoolAllocator& rhs) /* = delete */;
+
+    //! Creates a new chunk.
+    /*! \param capacity Capacity of the chunk in bytes.
+    */
+    void AddChunk(size_t capacity) {
+        if (!baseAllocator_)
+            ownBaseAllocator_ = baseAllocator_ = RAPIDJSON_NEW(BaseAllocator());
+        ChunkHeader* chunk = reinterpret_cast<ChunkHeader*>(baseAllocator_->Malloc(sizeof(ChunkHeader) + capacity));
+        chunk->capacity = capacity;
+        chunk->size = 0;
+        chunk->next = chunkHead_;
+        chunkHead_ =  chunk;
+    }
+
+    static const int kDefaultChunkCapacity = 64 * 1024; //!< Default chunk capacity.
+
+    //! Chunk header for perpending to each chunk.
+    /*! Chunks are stored as a singly linked list.
+    */
+    struct ChunkHeader {
+        size_t capacity;    //!< Capacity of the chunk in bytes (excluding the header itself).
+        size_t size;        //!< Current size of allocated memory in bytes.
+        ChunkHeader *next;  //!< Next chunk in the linked list.
+    };
+
+    ChunkHeader *chunkHead_;    //!< Head of the chunk linked-list. Only the head chunk serves allocation.
+    size_t chunk_capacity_;     //!< The minimum capacity of chunk when they are allocated.
+    void *userBuffer_;          //!< User supplied buffer.
+    BaseAllocator* baseAllocator_;  //!< base allocator for allocating memory chunks.
+    BaseAllocator* ownBaseAllocator_;   //!< base allocator created by this object.
+};
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_ENCODINGS_H_

libs/rapidjson/encodedstream.h

@@ -0,0 +1,261 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_ENCODEDSTREAM_H_
+#define RAPIDJSON_ENCODEDSTREAM_H_
+
+#include "rapidjson.h"
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(effc++)
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Input byte stream wrapper with a statically bound encoding.
+/*!
+    \tparam Encoding The interpretation of encoding of the stream. Either UTF8, UTF16LE, UTF16BE, UTF32LE, UTF32BE.
+    \tparam InputByteStream Type of input byte stream. For example, FileReadStream.
+*/
+template <typename Encoding, typename InputByteStream>
+class EncodedInputStream {
+    RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+public:
+    typedef typename Encoding::Ch Ch;
+
+    EncodedInputStream(InputByteStream& is) : is_(is) { 
+        current_ = Encoding::TakeBOM(is_);
+    }
+
+    Ch Peek() const { return current_; }
+    Ch Take() { Ch c = current_; current_ = Encoding::Take(is_); return c; }
+    size_t Tell() const { return is_.Tell(); }
+
+    // Not implemented
+    void Put(Ch) { RAPIDJSON_ASSERT(false); }
+    void Flush() { RAPIDJSON_ASSERT(false); } 
+    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
+
+private:
+    EncodedInputStream(const EncodedInputStream&);
+    EncodedInputStream& operator=(const EncodedInputStream&);
+
+    InputByteStream& is_;
+    Ch current_;
+};
+
+//! Output byte stream wrapper with statically bound encoding.
+/*!
+    \tparam Encoding The interpretation of encoding of the stream. Either UTF8, UTF16LE, UTF16BE, UTF32LE, UTF32BE.
+    \tparam InputByteStream Type of input byte stream. For example, FileWriteStream.
+*/
+template <typename Encoding, typename OutputByteStream>
+class EncodedOutputStream {
+    RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+public:
+    typedef typename Encoding::Ch Ch;
+
+    EncodedOutputStream(OutputByteStream& os, bool putBOM = true) : os_(os) { 
+        if (putBOM)
+            Encoding::PutBOM(os_);
+    }
+
+    void Put(Ch c) { Encoding::Put(os_, c);  }
+    void Flush() { os_.Flush(); }
+
+    // Not implemented
+    Ch Peek() const { RAPIDJSON_ASSERT(false); }
+    Ch Take() { RAPIDJSON_ASSERT(false);  }
+    size_t Tell() const { RAPIDJSON_ASSERT(false);  return 0; }
+    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
+
+private:
+    EncodedOutputStream(const EncodedOutputStream&);
+    EncodedOutputStream& operator=(const EncodedOutputStream&);
+
+    OutputByteStream& os_;
+};
+
+#define RAPIDJSON_ENCODINGS_FUNC(x) UTF8<Ch>::x, UTF16LE<Ch>::x, UTF16BE<Ch>::x, UTF32LE<Ch>::x, UTF32BE<Ch>::x
+
+//! Input stream wrapper with dynamically bound encoding and automatic encoding detection.
+/*!
+    \tparam CharType Type of character for reading.
+    \tparam InputByteStream type of input byte stream to be wrapped.
+*/
+template <typename CharType, typename InputByteStream>
+class AutoUTFInputStream {
+    RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+public:
+    typedef CharType Ch;
+
+    //! Constructor.
+    /*!
+        \param is input stream to be wrapped.
+        \param type UTF encoding type if it is not detected from the stream.
+    */
+    AutoUTFInputStream(InputByteStream& is, UTFType type = kUTF8) : is_(&is), type_(type), hasBOM_(false) {
+        RAPIDJSON_ASSERT(type >= kUTF8 && type <= kUTF32BE);        
+        DetectType();
+        static const TakeFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(Take) };
+        takeFunc_ = f[type_];
+        current_ = takeFunc_(*is_);
+    }
+
+    UTFType GetType() const { return type_; }
+    bool HasBOM() const { return hasBOM_; }
+
+    Ch Peek() const { return current_; }
+    Ch Take() { Ch c = current_; current_ = takeFunc_(*is_); return c; }
+    size_t Tell() const { return is_->Tell(); }
+
+    // Not implemented
+    void Put(Ch) { RAPIDJSON_ASSERT(false); }
+    void Flush() { RAPIDJSON_ASSERT(false); } 
+    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
+
+private:
+    AutoUTFInputStream(const AutoUTFInputStream&);
+    AutoUTFInputStream& operator=(const AutoUTFInputStream&);
+
+    // Detect encoding type with BOM or RFC 4627
+    void DetectType() {
+        // BOM (Byte Order Mark):
+        // 00 00 FE FF  UTF-32BE
+        // FF FE 00 00  UTF-32LE
+        // FE FF        UTF-16BE
+        // FF FE        UTF-16LE
+        // EF BB BF     UTF-8
+
+        const unsigned char* c = (const unsigned char *)is_->Peek4();
+        if (!c)
+            return;
+
+        unsigned bom = c[0] | (c[1] << 8) | (c[2] << 16) | (c[3] << 24);
+        hasBOM_ = false;
+        if (bom == 0xFFFE0000)                  { type_ = kUTF32BE; hasBOM_ = true; is_->Take(); is_->Take(); is_->Take(); is_->Take(); }
+        else if (bom == 0x0000FEFF)             { type_ = kUTF32LE; hasBOM_ = true; is_->Take(); is_->Take(); is_->Take(); is_->Take(); }
+        else if ((bom & 0xFFFF) == 0xFFFE)      { type_ = kUTF16BE; hasBOM_ = true; is_->Take(); is_->Take();                           }
+        else if ((bom & 0xFFFF) == 0xFEFF)      { type_ = kUTF16LE; hasBOM_ = true; is_->Take(); is_->Take();                           }
+        else if ((bom & 0xFFFFFF) == 0xBFBBEF)  { type_ = kUTF8;    hasBOM_ = true; is_->Take(); is_->Take(); is_->Take();              }
+
+        // RFC 4627: Section 3
+        // "Since the first two characters of a JSON text will always be ASCII
+        // characters [RFC0020], it is possible to determine whether an octet
+        // stream is UTF-8, UTF-16 (BE or LE), or UTF-32 (BE or LE) by looking
+        // at the pattern of nulls in the first four octets."
+        // 00 00 00 xx  UTF-32BE
+        // 00 xx 00 xx  UTF-16BE
+        // xx 00 00 00  UTF-32LE
+        // xx 00 xx 00  UTF-16LE
+        // xx xx xx xx  UTF-8
+
+        if (!hasBOM_) {
+            unsigned pattern = (c[0] ? 1 : 0) | (c[1] ? 2 : 0) | (c[2] ? 4 : 0) | (c[3] ? 8 : 0);
+            switch (pattern) {
+            case 0x08: type_ = kUTF32BE; break;
+            case 0x0A: type_ = kUTF16BE; break;
+            case 0x01: type_ = kUTF32LE; break;
+            case 0x05: type_ = kUTF16LE; break;
+            case 0x0F: type_ = kUTF8;    break;
+            default: break; // Use type defined by user.
+            }
+        }
+
+        // Runtime check whether the size of character type is sufficient. It only perform checks with assertion.
+        if (type_ == kUTF16LE || type_ == kUTF16BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 2);
+        if (type_ == kUTF32LE || type_ == kUTF32BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 4);
+    }
+
+    typedef Ch (*TakeFunc)(InputByteStream& is);
+    InputByteStream* is_;
+    UTFType type_;
+    Ch current_;
+    TakeFunc takeFunc_;
+    bool hasBOM_;
+};
+
+//! Output stream wrapper with dynamically bound encoding and automatic encoding detection.
+/*!
+    \tparam CharType Type of character for writing.
+    \tparam InputByteStream type of output byte stream to be wrapped.
+*/
+template <typename CharType, typename OutputByteStream>
+class AutoUTFOutputStream {
+    RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+public:
+    typedef CharType Ch;
+
+    //! Constructor.
+    /*!
+        \param os output stream to be wrapped.
+        \param type UTF encoding type.
+        \param putBOM Whether to write BOM at the beginning of the stream.
+    */
+    AutoUTFOutputStream(OutputByteStream& os, UTFType type, bool putBOM) : os_(&os), type_(type) {
+        RAPIDJSON_ASSERT(type >= kUTF8 && type <= kUTF32BE);
+
+        // Runtime check whether the size of character type is sufficient. It only perform checks with assertion.
+        if (type_ == kUTF16LE || type_ == kUTF16BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 2);
+        if (type_ == kUTF32LE || type_ == kUTF32BE) RAPIDJSON_ASSERT(sizeof(Ch) >= 4);
+
+        static const PutFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(Put) };
+        putFunc_ = f[type_];
+
+        if (putBOM)
+            PutBOM();
+    }
+
+    UTFType GetType() const { return type_; }
+
+    void Put(Ch c) { putFunc_(*os_, c); }
+    void Flush() { os_->Flush(); } 
+
+    // Not implemented
+    Ch Peek() const { RAPIDJSON_ASSERT(false); }
+    Ch Take() { RAPIDJSON_ASSERT(false); }
+    size_t Tell() const { RAPIDJSON_ASSERT(false); return 0; }
+    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
+
+private:
+    AutoUTFOutputStream(const AutoUTFOutputStream&);
+    AutoUTFOutputStream& operator=(const AutoUTFOutputStream&);
+
+    void PutBOM() { 
+        typedef void (*PutBOMFunc)(OutputByteStream&);
+        static const PutBOMFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(PutBOM) };
+        f[type_](*os_);
+    }
+
+    typedef void (*PutFunc)(OutputByteStream&, Ch);
+
+    OutputByteStream* os_;
+    UTFType type_;
+    PutFunc putFunc_;
+};
+
+#undef RAPIDJSON_ENCODINGS_FUNC
+
+RAPIDJSON_NAMESPACE_END
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_POP
+#endif
+
+#endif // RAPIDJSON_FILESTREAM_H_

libs/rapidjson/encodings.h

@@ -0,0 +1,625 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_ENCODINGS_H_
+#define RAPIDJSON_ENCODINGS_H_
+
+#include "rapidjson.h"
+
+#ifdef _MSC_VER
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(4244) // conversion from 'type1' to 'type2', possible loss of data
+RAPIDJSON_DIAG_OFF(4702)  // unreachable code
+#elif defined(__GNUC__)
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(effc++)
+RAPIDJSON_DIAG_OFF(overflow)
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+///////////////////////////////////////////////////////////////////////////////
+// Encoding
+
+/*! \class rapidjson::Encoding
+    \brief Concept for encoding of Unicode characters.
+
+\code
+concept Encoding {
+    typename Ch;    //! Type of character. A "character" is actually a code unit in unicode's definition.
+
+    enum { supportUnicode = 1 }; // or 0 if not supporting unicode
+
+    //! \brief Encode a Unicode codepoint to an output stream.
+    //! \param os Output stream.
+    //! \param codepoint An unicode codepoint, ranging from 0x0 to 0x10FFFF inclusively.
+    template<typename OutputStream>
+    static void Encode(OutputStream& os, unsigned codepoint);
+
+    //! \brief Decode a Unicode codepoint from an input stream.
+    //! \param is Input stream.
+    //! \param codepoint Output of the unicode codepoint.
+    //! \return true if a valid codepoint can be decoded from the stream.
+    template <typename InputStream>
+    static bool Decode(InputStream& is, unsigned* codepoint);
+
+    //! \brief Validate one Unicode codepoint from an encoded stream.
+    //! \param is Input stream to obtain codepoint.
+    //! \param os Output for copying one codepoint.
+    //! \return true if it is valid.
+    //! \note This function just validating and copying the codepoint without actually decode it.
+    template <typename InputStream, typename OutputStream>
+    static bool Validate(InputStream& is, OutputStream& os);
+
+    // The following functions are deal with byte streams.
+
+    //! Take a character from input byte stream, skip BOM if exist.
+    template <typename InputByteStream>
+    static CharType TakeBOM(InputByteStream& is);
+
+    //! Take a character from input byte stream.
+    template <typename InputByteStream>
+    static Ch Take(InputByteStream& is);
+
+    //! Put BOM to output byte stream.
+    template <typename OutputByteStream>
+    static void PutBOM(OutputByteStream& os);
+
+    //! Put a character to output byte stream.
+    template <typename OutputByteStream>
+    static void Put(OutputByteStream& os, Ch c);
+};
+\endcode
+*/
+
+///////////////////////////////////////////////////////////////////////////////
+// UTF8
+
+//! UTF-8 encoding.
+/*! http://en.wikipedia.org/wiki/UTF-8
+    http://tools.ietf.org/html/rfc3629
+    \tparam CharType Code unit for storing 8-bit UTF-8 data. Default is char.
+    \note implements Encoding concept
+*/
+template<typename CharType = char>
+struct UTF8 {
+    typedef CharType Ch;
+
+    enum { supportUnicode = 1 };
+
+    template<typename OutputStream>
+    static void Encode(OutputStream& os, unsigned codepoint) {
+        if (codepoint <= 0x7F) 
+            os.Put(static_cast<Ch>(codepoint & 0xFF));
+        else if (codepoint <= 0x7FF) {
+            os.Put(static_cast<Ch>(0xC0 | ((codepoint >> 6) & 0xFF)));
+            os.Put(static_cast<Ch>(0x80 | ((codepoint & 0x3F))));
+        }
+        else if (codepoint <= 0xFFFF) {
+            os.Put(static_cast<Ch>(0xE0 | ((codepoint >> 12) & 0xFF)));
+            os.Put(static_cast<Ch>(0x80 | ((codepoint >> 6) & 0x3F)));
+            os.Put(static_cast<Ch>(0x80 | (codepoint & 0x3F)));
+        }
+        else {
+            RAPIDJSON_ASSERT(codepoint <= 0x10FFFF);
+            os.Put(static_cast<Ch>(0xF0 | ((codepoint >> 18) & 0xFF)));
+            os.Put(static_cast<Ch>(0x80 | ((codepoint >> 12) & 0x3F)));
+            os.Put(static_cast<Ch>(0x80 | ((codepoint >> 6) & 0x3F)));
+            os.Put(static_cast<Ch>(0x80 | (codepoint & 0x3F)));
+        }
+    }
+
+    template <typename InputStream>
+    static bool Decode(InputStream& is, unsigned* codepoint) {
+#define COPY() c = is.Take(); *codepoint = (*codepoint << 6) | ((unsigned char)c & 0x3Fu)
+#define TRANS(mask) result &= ((GetRange((unsigned char)c) & mask) != 0)
+#define TAIL() COPY(); TRANS(0x70)
+        Ch c = is.Take();
+        if (!(c & 0x80)) {
+            *codepoint = (unsigned char)c;
+            return true;
+        }
+
+        unsigned char type = GetRange((unsigned char)c);
+        *codepoint = (0xFF >> type) & (unsigned char)c;
+        bool result = true;
+        switch (type) {
+        case 2: TAIL(); return result;
+        case 3: TAIL(); TAIL(); return result;
+        case 4: COPY(); TRANS(0x50); TAIL(); return result;
+        case 5: COPY(); TRANS(0x10); TAIL(); TAIL(); return result;
+        case 6: TAIL(); TAIL(); TAIL(); return result;
+        case 10: COPY(); TRANS(0x20); TAIL(); return result;
+        case 11: COPY(); TRANS(0x60); TAIL(); TAIL(); return result;
+        default: return false;
+        }
+#undef COPY
+#undef TRANS
+#undef TAIL
+    }
+
+    template <typename InputStream, typename OutputStream>
+    static bool Validate(InputStream& is, OutputStream& os) {
+#define COPY() os.Put(c = is.Take())
+#define TRANS(mask) result &= ((GetRange((unsigned char)c) & mask) != 0)
+#define TAIL() COPY(); TRANS(0x70)
+        Ch c;
+        COPY();
+        if (!(c & 0x80))
+            return true;
+
+        bool result = true;
+        switch (GetRange((unsigned char)c)) {
+        case 2: TAIL(); return result;
+        case 3: TAIL(); TAIL(); return result;
+        case 4: COPY(); TRANS(0x50); TAIL(); return result;
+        case 5: COPY(); TRANS(0x10); TAIL(); TAIL(); return result;
+        case 6: TAIL(); TAIL(); TAIL(); return result;
+        case 10: COPY(); TRANS(0x20); TAIL(); return result;
+        case 11: COPY(); TRANS(0x60); TAIL(); TAIL(); return result;
+        default: return false;
+        }
+#undef COPY
+#undef TRANS
+#undef TAIL
+    }
+
+    static unsigned char GetRange(unsigned char c) {
+        // Referring to DFA of http://bjoern.hoehrmann.de/utf-8/decoder/dfa/
+        // With new mapping 1 -> 0x10, 7 -> 0x20, 9 -> 0x40, such that AND operation can test multiple types.
+        static const unsigned char type[] = {
+            0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+            0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+            0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+            0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+            0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,
+            0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,
+            0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
+            0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
+            8,8,2,2,2,2,2,2,2,2,2,2,2,2,2,2,  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
+            10,3,3,3,3,3,3,3,3,3,3,3,3,4,3,3, 11,6,6,6,5,8,8,8,8,8,8,8,8,8,8,8,
+        };
+        return type[c];
+    }
+
+    template <typename InputByteStream>
+    static CharType TakeBOM(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        Ch c = Take(is);
+        if ((unsigned char)c != 0xEFu) return c;
+        c = is.Take();
+        if ((unsigned char)c != 0xBBu) return c;
+        c = is.Take();
+        if ((unsigned char)c != 0xBFu) return c;
+        c = is.Take();
+        return c;
+    }
+
+    template <typename InputByteStream>
+    static Ch Take(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        return is.Take();
+    }
+
+    template <typename OutputByteStream>
+    static void PutBOM(OutputByteStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(0xEFu); os.Put(0xBBu); os.Put(0xBFu);
+    }
+
+    template <typename OutputByteStream>
+    static void Put(OutputByteStream& os, Ch c) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(static_cast<typename OutputByteStream::Ch>(c));
+    }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// UTF16
+
+//! UTF-16 encoding.
+/*! http://en.wikipedia.org/wiki/UTF-16
+    http://tools.ietf.org/html/rfc2781
+    \tparam CharType Type for storing 16-bit UTF-16 data. Default is wchar_t. C++11 may use char16_t instead.
+    \note implements Encoding concept
+
+    \note For in-memory access, no need to concern endianness. The code units and code points are represented by CPU's endianness.
+    For streaming, use UTF16LE and UTF16BE, which handle endianness.
+*/
+template<typename CharType = wchar_t>
+struct UTF16 {
+    typedef CharType Ch;
+    RAPIDJSON_STATIC_ASSERT(sizeof(Ch) >= 2);
+
+    enum { supportUnicode = 1 };
+
+    template<typename OutputStream>
+    static void Encode(OutputStream& os, unsigned codepoint) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputStream::Ch) >= 2);
+        if (codepoint <= 0xFFFF) {
+            RAPIDJSON_ASSERT(codepoint < 0xD800 || codepoint > 0xDFFF); // Code point itself cannot be surrogate pair 
+            os.Put(static_cast<typename OutputStream::Ch>(codepoint));
+        }
+        else {
+            RAPIDJSON_ASSERT(codepoint <= 0x10FFFF);
+            unsigned v = codepoint - 0x10000;
+            os.Put(static_cast<typename OutputStream::Ch>((v >> 10) | 0xD800));
+            os.Put((v & 0x3FF) | 0xDC00);
+        }
+    }
+
+    template <typename InputStream>
+    static bool Decode(InputStream& is, unsigned* codepoint) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputStream::Ch) >= 2);
+        Ch c = is.Take();
+        if (c < 0xD800 || c > 0xDFFF) {
+            *codepoint = c;
+            return true;
+        }
+        else if (c <= 0xDBFF) {
+            *codepoint = (c & 0x3FF) << 10;
+            c = is.Take();
+            *codepoint |= (c & 0x3FF);
+            *codepoint += 0x10000;
+            return c >= 0xDC00 && c <= 0xDFFF;
+        }
+        return false;
+    }
+
+    template <typename InputStream, typename OutputStream>
+    static bool Validate(InputStream& is, OutputStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputStream::Ch) >= 2);
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputStream::Ch) >= 2);
+        Ch c;
+        os.Put(c = is.Take());
+        if (c < 0xD800 || c > 0xDFFF)
+            return true;
+        else if (c <= 0xDBFF) {
+            os.Put(c = is.Take());
+            return c >= 0xDC00 && c <= 0xDFFF;
+        }
+        return false;
+    }
+};
+
+//! UTF-16 little endian encoding.
+template<typename CharType = wchar_t>
+struct UTF16LE : UTF16<CharType> {
+    template <typename InputByteStream>
+    static CharType TakeBOM(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = Take(is);
+        return (unsigned short)c == 0xFEFFu ? Take(is) : c;
+    }
+
+    template <typename InputByteStream>
+    static CharType Take(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = (unsigned char)is.Take();
+        c |= (unsigned char)is.Take() << 8;
+        return c;
+    }
+
+    template <typename OutputByteStream>
+    static void PutBOM(OutputByteStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(0xFFu); os.Put(0xFEu);
+    }
+
+    template <typename OutputByteStream>
+    static void Put(OutputByteStream& os, CharType c) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(c & 0xFFu);
+        os.Put((c >> 8) & 0xFFu);
+    }
+};
+
+//! UTF-16 big endian encoding.
+template<typename CharType = wchar_t>
+struct UTF16BE : UTF16<CharType> {
+    template <typename InputByteStream>
+    static CharType TakeBOM(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = Take(is);
+        return (unsigned short)c == 0xFEFFu ? Take(is) : c;
+    }
+
+    template <typename InputByteStream>
+    static CharType Take(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = (unsigned char)is.Take() << 8;
+        c |= (unsigned char)is.Take();
+        return c;
+    }
+
+    template <typename OutputByteStream>
+    static void PutBOM(OutputByteStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(0xFEu); os.Put(0xFFu);
+    }
+
+    template <typename OutputByteStream>
+    static void Put(OutputByteStream& os, CharType c) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put((c >> 8) & 0xFFu);
+        os.Put(c & 0xFFu);
+    }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// UTF32
+
+//! UTF-32 encoding. 
+/*! http://en.wikipedia.org/wiki/UTF-32
+    \tparam CharType Type for storing 32-bit UTF-32 data. Default is unsigned. C++11 may use char32_t instead.
+    \note implements Encoding concept
+
+    \note For in-memory access, no need to concern endianness. The code units and code points are represented by CPU's endianness.
+    For streaming, use UTF32LE and UTF32BE, which handle endianness.
+*/
+template<typename CharType = unsigned>
+struct UTF32 {
+    typedef CharType Ch;
+    RAPIDJSON_STATIC_ASSERT(sizeof(Ch) >= 4);
+
+    enum { supportUnicode = 1 };
+
+    template<typename OutputStream>
+    static void Encode(OutputStream& os, unsigned codepoint) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputStream::Ch) >= 4);
+        RAPIDJSON_ASSERT(codepoint <= 0x10FFFF);
+        os.Put(codepoint);
+    }
+
+    template <typename InputStream>
+    static bool Decode(InputStream& is, unsigned* codepoint) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputStream::Ch) >= 4);
+        Ch c = is.Take();
+        *codepoint = c;
+        return c <= 0x10FFFF;
+    }
+
+    template <typename InputStream, typename OutputStream>
+    static bool Validate(InputStream& is, OutputStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputStream::Ch) >= 4);
+        Ch c;
+        os.Put(c = is.Take());
+        return c <= 0x10FFFF;
+    }
+};
+
+//! UTF-32 little endian enocoding.
+template<typename CharType = unsigned>
+struct UTF32LE : UTF32<CharType> {
+    template <typename InputByteStream>
+    static CharType TakeBOM(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = Take(is);
+        return (unsigned)c == 0x0000FEFFu ? Take(is) : c;
+    }
+
+    template <typename InputByteStream>
+    static CharType Take(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = (unsigned char)is.Take();
+        c |= (unsigned char)is.Take() << 8;
+        c |= (unsigned char)is.Take() << 16;
+        c |= (unsigned char)is.Take() << 24;
+        return c;
+    }
+
+    template <typename OutputByteStream>
+    static void PutBOM(OutputByteStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(0xFFu); os.Put(0xFEu); os.Put(0x00u); os.Put(0x00u);
+    }
+
+    template <typename OutputByteStream>
+    static void Put(OutputByteStream& os, CharType c) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(c & 0xFFu);
+        os.Put((c >> 8) & 0xFFu);
+        os.Put((c >> 16) & 0xFFu);
+        os.Put((c >> 24) & 0xFFu);
+    }
+};
+
+//! UTF-32 big endian encoding.
+template<typename CharType = unsigned>
+struct UTF32BE : UTF32<CharType> {
+    template <typename InputByteStream>
+    static CharType TakeBOM(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = Take(is);
+        return (unsigned)c == 0x0000FEFFu ? Take(is) : c; 
+    }
+
+    template <typename InputByteStream>
+    static CharType Take(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        CharType c = (unsigned char)is.Take() << 24;
+        c |= (unsigned char)is.Take() << 16;
+        c |= (unsigned char)is.Take() << 8;
+        c |= (unsigned char)is.Take();
+        return c;
+    }
+
+    template <typename OutputByteStream>
+    static void PutBOM(OutputByteStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(0x00u); os.Put(0x00u); os.Put(0xFEu); os.Put(0xFFu);
+    }
+
+    template <typename OutputByteStream>
+    static void Put(OutputByteStream& os, CharType c) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put((c >> 24) & 0xFFu);
+        os.Put((c >> 16) & 0xFFu);
+        os.Put((c >> 8) & 0xFFu);
+        os.Put(c & 0xFFu);
+    }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// ASCII
+
+//! ASCII encoding.
+/*! http://en.wikipedia.org/wiki/ASCII
+    \tparam CharType Code unit for storing 7-bit ASCII data. Default is char.
+    \note implements Encoding concept
+*/
+template<typename CharType = char>
+struct ASCII {
+    typedef CharType Ch;
+
+    enum { supportUnicode = 0 };
+
+    template<typename OutputStream>
+    static void Encode(OutputStream& os, unsigned codepoint) {
+        RAPIDJSON_ASSERT(codepoint <= 0x7F);
+        os.Put(static_cast<Ch>(codepoint & 0xFF));
+    }
+
+    template <typename InputStream>
+    static bool Decode(InputStream& is, unsigned* codepoint) {
+        unsigned char c = static_cast<unsigned char>(is.Take());
+        *codepoint = c;
+        return c <= 0X7F;
+    }
+
+    template <typename InputStream, typename OutputStream>
+    static bool Validate(InputStream& is, OutputStream& os) {
+        unsigned char c = is.Take();
+        os.Put(c);
+        return c <= 0x7F;
+    }
+
+    template <typename InputByteStream>
+    static CharType TakeBOM(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        Ch c = Take(is);
+        return c;
+    }
+
+    template <typename InputByteStream>
+    static Ch Take(InputByteStream& is) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename InputByteStream::Ch) == 1);
+        return is.Take();
+    }
+
+    template <typename OutputByteStream>
+    static void PutBOM(OutputByteStream& os) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        (void)os;
+    }
+
+    template <typename OutputByteStream>
+    static void Put(OutputByteStream& os, Ch c) {
+        RAPIDJSON_STATIC_ASSERT(sizeof(typename OutputByteStream::Ch) == 1);
+        os.Put(static_cast<typename OutputByteStream::Ch>(c));
+    }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// AutoUTF
+
+//! Runtime-specified UTF encoding type of a stream.
+enum UTFType {
+    kUTF8 = 0,      //!< UTF-8.
+    kUTF16LE = 1,   //!< UTF-16 little endian.
+    kUTF16BE = 2,   //!< UTF-16 big endian.
+    kUTF32LE = 3,   //!< UTF-32 little endian.
+    kUTF32BE = 4    //!< UTF-32 big endian.
+};
+
+//! Dynamically select encoding according to stream's runtime-specified UTF encoding type.
+/*! \note This class can be used with AutoUTFInputtStream and AutoUTFOutputStream, which provides GetType().
+*/
+template<typename CharType>
+struct AutoUTF {
+    typedef CharType Ch;
+
+    enum { supportUnicode = 1 };
+
+#define RAPIDJSON_ENCODINGS_FUNC(x) UTF8<Ch>::x, UTF16LE<Ch>::x, UTF16BE<Ch>::x, UTF32LE<Ch>::x, UTF32BE<Ch>::x
+
+    template<typename OutputStream>
+    RAPIDJSON_FORCEINLINE static void Encode(OutputStream& os, unsigned codepoint) {
+        typedef void (*EncodeFunc)(OutputStream&, unsigned);
+        static const EncodeFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(Encode) };
+        (*f[os.GetType()])(os, codepoint);
+    }
+
+    template <typename InputStream>
+    RAPIDJSON_FORCEINLINE static bool Decode(InputStream& is, unsigned* codepoint) {
+        typedef bool (*DecodeFunc)(InputStream&, unsigned*);
+        static const DecodeFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(Decode) };
+        return (*f[is.GetType()])(is, codepoint);
+    }
+
+    template <typename InputStream, typename OutputStream>
+    RAPIDJSON_FORCEINLINE static bool Validate(InputStream& is, OutputStream& os) {
+        typedef bool (*ValidateFunc)(InputStream&, OutputStream&);
+        static const ValidateFunc f[] = { RAPIDJSON_ENCODINGS_FUNC(Validate) };
+        return (*f[is.GetType()])(is, os);
+    }
+
+#undef RAPIDJSON_ENCODINGS_FUNC
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// Transcoder
+
+//! Encoding conversion.
+template<typename SourceEncoding, typename TargetEncoding>
+struct Transcoder {
+    //! Take one Unicode codepoint from source encoding, convert it to target encoding and put it to the output stream.
+    template<typename InputStream, typename OutputStream>
+    RAPIDJSON_FORCEINLINE static bool Transcode(InputStream& is, OutputStream& os) {
+        unsigned codepoint;
+        if (!SourceEncoding::Decode(is, &codepoint))
+            return false;
+        TargetEncoding::Encode(os, codepoint);
+        return true;
+    }
+
+    //! Validate one Unicode codepoint from an encoded stream.
+    template<typename InputStream, typename OutputStream>
+    RAPIDJSON_FORCEINLINE static bool Validate(InputStream& is, OutputStream& os) {
+        return Transcode(is, os);   // Since source/target encoding is different, must transcode.
+    }
+};
+
+//! Specialization of Transcoder with same source and target encoding.
+template<typename Encoding>
+struct Transcoder<Encoding, Encoding> {
+    template<typename InputStream, typename OutputStream>
+    RAPIDJSON_FORCEINLINE static bool Transcode(InputStream& is, OutputStream& os) {
+        os.Put(is.Take());  // Just copy one code unit. This semantic is different from primary template class.
+        return true;
+    }
+    
+    template<typename InputStream, typename OutputStream>
+    RAPIDJSON_FORCEINLINE static bool Validate(InputStream& is, OutputStream& os) {
+        return Encoding::Validate(is, os);  // source/target encoding are the same
+    }
+};
+
+RAPIDJSON_NAMESPACE_END
+
+#if defined(__GNUC__) || defined(_MSV_VER)
+RAPIDJSON_DIAG_POP
+#endif
+
+#endif // RAPIDJSON_ENCODINGS_H_

libs/rapidjson/error/en.h

@@ -0,0 +1,65 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_ERROR_EN_H__
+#define RAPIDJSON_ERROR_EN_H__
+
+#include "error.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Maps error code of parsing into error message.
+/*!
+    \ingroup RAPIDJSON_ERRORS
+    \param parseErrorCode Error code obtained in parsing.
+    \return the error message.
+    \note User can make a copy of this function for localization.
+        Using switch-case is safer for future modification of error codes.
+*/
+inline const RAPIDJSON_ERROR_CHARTYPE* GetParseError_En(ParseErrorCode parseErrorCode) {
+    switch (parseErrorCode) {
+        case kParseErrorNone:                           return RAPIDJSON_ERROR_STRING("No error.");
+
+        case kParseErrorDocumentEmpty:                  return RAPIDJSON_ERROR_STRING("The document is empty.");
+        case kParseErrorDocumentRootNotSingular:        return RAPIDJSON_ERROR_STRING("The document root must not follow by other values.");
+    
+        case kParseErrorValueInvalid:                   return RAPIDJSON_ERROR_STRING("Invalid value.");
+    
+        case kParseErrorObjectMissName:                 return RAPIDJSON_ERROR_STRING("Missing a name for object member.");
+        case kParseErrorObjectMissColon:                return RAPIDJSON_ERROR_STRING("Missing a colon after a name of object member.");
+        case kParseErrorObjectMissCommaOrCurlyBracket:  return RAPIDJSON_ERROR_STRING("Missing a comma or '}' after an object member.");
+    
+        case kParseErrorArrayMissCommaOrSquareBracket:  return RAPIDJSON_ERROR_STRING("Missing a comma or ']' after an array element.");
+
+        case kParseErrorStringUnicodeEscapeInvalidHex:  return RAPIDJSON_ERROR_STRING("Incorrect hex digit after \\u escape in string.");
+        case kParseErrorStringUnicodeSurrogateInvalid:  return RAPIDJSON_ERROR_STRING("The surrogate pair in string is invalid.");
+        case kParseErrorStringEscapeInvalid:            return RAPIDJSON_ERROR_STRING("Invalid escape character in string.");
+        case kParseErrorStringMissQuotationMark:        return RAPIDJSON_ERROR_STRING("Missing a closing quotation mark in string.");
+        case kParseErrorStringInvalidEncoding:          return RAPIDJSON_ERROR_STRING("Invalid encoding in string.");
+
+        case kParseErrorNumberTooBig:                   return RAPIDJSON_ERROR_STRING("Number too big to be stored in double.");
+        case kParseErrorNumberMissFraction:             return RAPIDJSON_ERROR_STRING("Miss fraction part in number.");
+        case kParseErrorNumberMissExponent:             return RAPIDJSON_ERROR_STRING("Miss exponent in number.");
+
+        case kParseErrorTermination:                    return RAPIDJSON_ERROR_STRING("Terminate parsing due to Handler error.");
+        case kParseErrorUnspecificSyntaxError:          return RAPIDJSON_ERROR_STRING("Unspecific syntax error.");
+
+        default:
+            return RAPIDJSON_ERROR_STRING("Unknown error.");
+    }
+}
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_ERROR_EN_H__

libs/rapidjson/error/error.h

@@ -0,0 +1,144 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_ERROR_ERROR_H__
+#define RAPIDJSON_ERROR_ERROR_H__
+
+/*! \file error.h */
+
+/*! \defgroup RAPIDJSON_ERRORS RapidJSON error handling */
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_ERROR_CHARTYPE
+
+//! Character type of error messages.
+/*! \ingroup RAPIDJSON_ERRORS
+    The default character type is \c char.
+    On Windows, user can define this macro as \c TCHAR for supporting both
+    unicode/non-unicode settings.
+*/
+#ifndef RAPIDJSON_ERROR_CHARTYPE
+#define RAPIDJSON_ERROR_CHARTYPE char
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_ERROR_STRING
+
+//! Macro for converting string literial to \ref RAPIDJSON_ERROR_CHARTYPE[].
+/*! \ingroup RAPIDJSON_ERRORS
+    By default this conversion macro does nothing.
+    On Windows, user can define this macro as \c _T(x) for supporting both
+    unicode/non-unicode settings.
+*/
+#ifndef RAPIDJSON_ERROR_STRING
+#define RAPIDJSON_ERROR_STRING(x) x
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+///////////////////////////////////////////////////////////////////////////////
+// ParseErrorCode
+
+//! Error code of parsing.
+/*! \ingroup RAPIDJSON_ERRORS
+    \see GenericReader::Parse, GenericReader::GetParseErrorCode
+*/
+enum ParseErrorCode {
+    kParseErrorNone = 0,                        //!< No error.
+
+    kParseErrorDocumentEmpty,                   //!< The document is empty.
+    kParseErrorDocumentRootNotSingular,         //!< The document root must not follow by other values.
+
+    kParseErrorValueInvalid,                    //!< Invalid value.
+
+    kParseErrorObjectMissName,                  //!< Missing a name for object member.
+    kParseErrorObjectMissColon,                 //!< Missing a colon after a name of object member.
+    kParseErrorObjectMissCommaOrCurlyBracket,   //!< Missing a comma or '}' after an object member.
+
+    kParseErrorArrayMissCommaOrSquareBracket,   //!< Missing a comma or ']' after an array element.
+
+    kParseErrorStringUnicodeEscapeInvalidHex,   //!< Incorrect hex digit after \\u escape in string.
+    kParseErrorStringUnicodeSurrogateInvalid,   //!< The surrogate pair in string is invalid.
+    kParseErrorStringEscapeInvalid,             //!< Invalid escape character in string.
+    kParseErrorStringMissQuotationMark,         //!< Missing a closing quotation mark in string.
+    kParseErrorStringInvalidEncoding,           //!< Invalid encoding in string.
+
+    kParseErrorNumberTooBig,                    //!< Number too big to be stored in double.
+    kParseErrorNumberMissFraction,              //!< Miss fraction part in number.
+    kParseErrorNumberMissExponent,              //!< Miss exponent in number.
+
+    kParseErrorTermination,                     //!< Parsing was terminated.
+    kParseErrorUnspecificSyntaxError            //!< Unspecific syntax error.
+};
+
+//! Result of parsing (wraps ParseErrorCode)
+/*!
+    \ingroup RAPIDJSON_ERRORS
+    \code
+        Document doc;
+        ParseResult ok = doc.Parse("[42]");
+        if (!ok) {
+            fprintf(stderr, "JSON parse error: %s (%u)",
+                    GetParseError_En(ok.Code()), ok.Offset());
+            exit(EXIT_FAILURE);
+        }
+    \endcode
+    \see GenericReader::Parse, GenericDocument::Parse
+*/
+struct ParseResult {
+
+    //! Default constructor, no error.
+    ParseResult() : code_(kParseErrorNone), offset_(0) {}
+    //! Constructor to set an error.
+    ParseResult(ParseErrorCode code, size_t offset) : code_(code), offset_(offset) {}
+
+    //! Get the error code.
+    ParseErrorCode Code() const { return code_; }
+    //! Get the error offset, if \ref IsError(), 0 otherwise.
+    size_t Offset() const { return offset_; }
+
+    //! Conversion to \c bool, returns \c true, iff !\ref IsError().
+    operator bool() const { return !IsError(); }
+    //! Whether the result is an error.
+    bool IsError() const { return code_ != kParseErrorNone; }
+
+    bool operator==(const ParseResult& that) const { return code_ == that.code_; }
+    bool operator==(ParseErrorCode code) const { return code_ == code; }
+    friend bool operator==(ParseErrorCode code, const ParseResult & err) { return code == err.code_; }
+
+    //! Reset error code.
+    void Clear() { Set(kParseErrorNone); }
+    //! Update error code and offset.
+    void Set(ParseErrorCode code, size_t offset = 0) { code_ = code; offset_ = offset; }
+
+private:
+    ParseErrorCode code_;
+    size_t offset_;
+};
+
+//! Function pointer type of GetParseError().
+/*! \ingroup RAPIDJSON_ERRORS
+
+    This is the prototype for \c GetParseError_X(), where \c X is a locale.
+    User can dynamically change locale in runtime, e.g.:
+\code
+    GetParseErrorFunc GetParseError = GetParseError_En; // or whatever
+    const RAPIDJSON_ERROR_CHARTYPE* s = GetParseError(document.GetParseErrorCode());
+\endcode
+*/
+typedef const RAPIDJSON_ERROR_CHARTYPE* (*GetParseErrorFunc)(ParseErrorCode);
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_ERROR_ERROR_H__

libs/rapidjson/filereadstream.h

@@ -0,0 +1,88 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_FILEREADSTREAM_H_
+#define RAPIDJSON_FILEREADSTREAM_H_
+
+#include "rapidjson.h"
+#include <cstdio>
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! File byte stream for input using fread().
+/*!
+    \note implements Stream concept
+*/
+class FileReadStream {
+public:
+    typedef char Ch;    //!< Character type (byte).
+
+    //! Constructor.
+    /*!
+        \param fp File pointer opened for read.
+        \param buffer user-supplied buffer.
+        \param bufferSize size of buffer in bytes. Must >=4 bytes.
+    */
+    FileReadStream(std::FILE* fp, char* buffer, size_t bufferSize) : fp_(fp), buffer_(buffer), bufferSize_(bufferSize), bufferLast_(0), current_(buffer_), readCount_(0), count_(0), eof_(false) { 
+        RAPIDJSON_ASSERT(fp_ != 0);
+        RAPIDJSON_ASSERT(bufferSize >= 4);
+        Read();
+    }
+
+    Ch Peek() const { return *current_; }
+    Ch Take() { Ch c = *current_; Read(); return c; }
+    size_t Tell() const { return count_ + static_cast<size_t>(current_ - buffer_); }
+
+    // Not implemented
+    void Put(Ch) { RAPIDJSON_ASSERT(false); }
+    void Flush() { RAPIDJSON_ASSERT(false); } 
+    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
+
+    // For encoding detection only.
+    const Ch* Peek4() const {
+        return (current_ + 4 <= bufferLast_) ? current_ : 0;
+    }
+
+private:
+    void Read() {
+        if (current_ < bufferLast_)
+            ++current_;
+        else if (!eof_) {
+            count_ += readCount_;
+            readCount_ = fread(buffer_, 1, bufferSize_, fp_);
+            bufferLast_ = buffer_ + readCount_ - 1;
+            current_ = buffer_;
+
+            if (readCount_ < bufferSize_) {
+                buffer_[readCount_] = '\0';
+                ++bufferLast_;
+                eof_ = true;
+            }
+        }
+    }
+
+    std::FILE* fp_;
+    Ch *buffer_;
+    size_t bufferSize_;
+    Ch *bufferLast_;
+    Ch *current_;
+    size_t readCount_;
+    size_t count_;  //!< Number of characters read
+    bool eof_;
+};
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_FILESTREAM_H_

libs/rapidjson/filewritestream.h

@@ -0,0 +1,91 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_FILEWRITESTREAM_H_
+#define RAPIDJSON_FILEWRITESTREAM_H_
+
+#include "rapidjson.h"
+#include <cstdio>
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Wrapper of C file stream for input using fread().
+/*!
+    \note implements Stream concept
+*/
+class FileWriteStream {
+public:
+    typedef char Ch;    //!< Character type. Only support char.
+
+    FileWriteStream(std::FILE* fp, char* buffer, size_t bufferSize) : fp_(fp), buffer_(buffer), bufferEnd_(buffer + bufferSize), current_(buffer_) { 
+        RAPIDJSON_ASSERT(fp_ != 0);
+    }
+
+    void Put(char c) { 
+        if (current_ >= bufferEnd_)
+            Flush();
+
+        *current_++ = c;
+    }
+
+    void PutN(char c, size_t n) {
+        size_t avail = static_cast<size_t>(bufferEnd_ - current_);
+        while (n > avail) {
+            std::memset(current_, c, avail);
+            current_ += avail;
+            Flush();
+            n -= avail;
+            avail = static_cast<size_t>(bufferEnd_ - current_);
+        }
+
+        if (n > 0) {
+            std::memset(current_, c, n);
+            current_ += n;
+        }
+    }
+
+    void Flush() {
+        if (current_ != buffer_) {
+            fwrite(buffer_, 1, static_cast<size_t>(current_ - buffer_), fp_);
+            current_ = buffer_;
+        }
+    }
+
+    // Not implemented
+    char Peek() const { RAPIDJSON_ASSERT(false); return 0; }
+    char Take() { RAPIDJSON_ASSERT(false); return 0; }
+    size_t Tell() const { RAPIDJSON_ASSERT(false); return 0; }
+    char* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    size_t PutEnd(char*) { RAPIDJSON_ASSERT(false); return 0; }
+
+private:
+    // Prohibit copy constructor & assignment operator.
+    FileWriteStream(const FileWriteStream&);
+    FileWriteStream& operator=(const FileWriteStream&);
+
+    std::FILE* fp_;
+    char *buffer_;
+    char *bufferEnd_;
+    char *current_;
+};
+
+//! Implement specialized version of PutN() with memset() for better performance.
+template<>
+inline void PutN(FileWriteStream& stream, char c, size_t n) {
+    stream.PutN(c, n);
+}
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_FILESTREAM_H_

libs/rapidjson/internal/biginteger.h

@@ -0,0 +1,280 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_BIGINTEGER_H_
+#define RAPIDJSON_BIGINTEGER_H_
+
+#include "../rapidjson.h"
+
+#if defined(_MSC_VER) && defined(_M_AMD64)
+#include <intrin.h> // for _umul128
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+class BigInteger {
+public:
+    typedef uint64_t Type;
+
+    BigInteger(const BigInteger& rhs) : count_(rhs.count_) {
+        std::memcpy(digits_, rhs.digits_, count_ * sizeof(Type));
+    }
+
+    explicit BigInteger(uint64_t u) : count_(1) {
+        digits_[0] = u;
+    }
+
+    BigInteger(const char* decimals, size_t length) : count_(1) {
+        RAPIDJSON_ASSERT(length > 0);
+        digits_[0] = 0;
+        size_t i = 0;
+        const size_t kMaxDigitPerIteration = 19;  // 2^64 = 18446744073709551616 > 10^19
+        while (length >= kMaxDigitPerIteration) {
+            AppendDecimal64(decimals + i, decimals + i + kMaxDigitPerIteration);
+            length -= kMaxDigitPerIteration;
+            i += kMaxDigitPerIteration;
+        }
+
+        if (length > 0)
+            AppendDecimal64(decimals + i, decimals + i + length);
+    }
+
+    BigInteger& operator=(uint64_t u) {
+        digits_[0] = u;            
+        count_ = 1;
+        return *this;
+    }
+
+    BigInteger& operator+=(uint64_t u) {
+        Type backup = digits_[0];
+        digits_[0] += u;
+        for (size_t i = 0; i < count_ - 1; i++) {
+            if (digits_[i] >= backup)
+                return *this; // no carry
+            backup = digits_[i + 1];
+            digits_[i + 1] += 1;
+        }
+
+        // Last carry
+        if (digits_[count_ - 1] < backup)
+            PushBack(1);
+
+        return *this;
+    }
+
+    BigInteger& operator*=(uint64_t u) {
+        if (u == 0) return *this = 0;
+        if (u == 1) return *this;
+        if (*this == 1) return *this = u;
+
+        uint64_t k = 0;
+        for (size_t i = 0; i < count_; i++) {
+            uint64_t hi;
+            digits_[i] = MulAdd64(digits_[i], u, k, &hi);
+            k = hi;
+        }
+        
+        if (k > 0)
+            PushBack(k);
+
+        return *this;
+    }
+
+    BigInteger& operator*=(uint32_t u) {
+        if (u == 0) return *this = 0;
+        if (u == 1) return *this;
+        if (*this == 1) return *this = u;
+
+        uint32_t k = 0;
+        for (size_t i = 0; i < count_; i++) {
+            const uint64_t c = digits_[i] >> 32;
+            const uint64_t d = digits_[i] & 0xFFFFFFFF;
+            const uint64_t uc = u * c;
+            const uint64_t ud = u * d;
+            const uint64_t p0 = ud + k;
+            const uint64_t p1 = uc + (p0 >> 32);
+            digits_[i] = (p0 & 0xFFFFFFFF) | (p1 << 32);
+            k = p1 >> 32;
+        }
+        
+        if (k > 0)
+            PushBack(k);
+
+        return *this;
+    }
+
+    BigInteger& operator<<=(size_t shift) {
+        if (IsZero() || shift == 0) return *this;
+
+        size_t offset = shift / kTypeBit;
+        size_t interShift = shift % kTypeBit;
+        RAPIDJSON_ASSERT(count_ + offset <= kCapacity);
+
+        if (interShift == 0) {
+            std::memmove(&digits_[count_ - 1 + offset], &digits_[count_ - 1], count_ * sizeof(Type));
+            count_ += offset;
+        }
+        else {
+            digits_[count_] = 0;
+            for (size_t i = count_; i > 0; i--)
+                digits_[i + offset] = (digits_[i] << interShift) | (digits_[i - 1] >> (kTypeBit - interShift));
+            digits_[offset] = digits_[0] << interShift;
+            count_ += offset;
+            if (digits_[count_])
+                count_++;
+        }
+
+        std::memset(digits_, 0, offset * sizeof(Type));
+
+        return *this;
+    }
+
+    bool operator==(const BigInteger& rhs) const {
+        return count_ == rhs.count_ && std::memcmp(digits_, rhs.digits_, count_ * sizeof(Type)) == 0;
+    }
+
+    bool operator==(const Type rhs) const {
+        return count_ == 1 && digits_[0] == rhs;
+    }
+
+    BigInteger& MultiplyPow5(unsigned exp) {
+        static const uint32_t kPow5[12] = {
+            5,
+            5 * 5,
+            5 * 5 * 5,
+            5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+            5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5
+        };
+        if (exp == 0) return *this;
+        for (; exp >= 27; exp -= 27) *this *= RAPIDJSON_UINT64_C2(0X6765C793, 0XFA10079D); // 5^27
+        for (; exp >= 13; exp -= 13) *this *= static_cast<uint32_t>(1220703125u); // 5^13
+        if (exp > 0)                 *this *= kPow5[exp - 1];
+        return *this;
+    }
+
+    // Compute absolute difference of this and rhs.
+    // Assume this != rhs
+    bool Difference(const BigInteger& rhs, BigInteger* out) const {
+        int cmp = Compare(rhs);
+        RAPIDJSON_ASSERT(cmp != 0);
+        const BigInteger *a, *b;  // Makes a > b
+        bool ret;
+        if (cmp < 0) { a = &rhs; b = this; ret = true; }
+        else         { a = this; b = &rhs; ret = false; }
+
+        Type borrow = 0;
+        for (size_t i = 0; i < a->count_; i++) {
+            Type d = a->digits_[i] - borrow;
+            if (i < b->count_)
+                d -= b->digits_[i];
+            borrow = (d > a->digits_[i]) ? 1 : 0;
+            out->digits_[i] = d;
+            if (d != 0)
+                out->count_ = i + 1;
+        }
+
+        return ret;
+    }
+
+    int Compare(const BigInteger& rhs) const {
+        if (count_ != rhs.count_)
+            return count_ < rhs.count_ ? -1 : 1;
+
+        for (size_t i = count_; i-- > 0;)
+            if (digits_[i] != rhs.digits_[i])
+                return digits_[i] < rhs.digits_[i] ? -1 : 1;
+
+        return 0;
+    }
+
+    size_t GetCount() const { return count_; }
+    Type GetDigit(size_t index) const { RAPIDJSON_ASSERT(index < count_); return digits_[index]; }
+    bool IsZero() const { return count_ == 1 && digits_[0] == 0; }
+
+private:
+    void AppendDecimal64(const char* begin, const char* end) {
+        uint64_t u = ParseUint64(begin, end);
+        if (IsZero())
+            *this = u;
+        else {
+            unsigned exp = static_cast<unsigned>(end - begin);
+            (MultiplyPow5(exp) <<= exp) += u;   // *this = *this * 10^exp + u
+        }
+    }
+
+    void PushBack(Type digit) {
+        RAPIDJSON_ASSERT(count_ < kCapacity);
+        digits_[count_++] = digit;
+    }
+
+    static uint64_t ParseUint64(const char* begin, const char* end) {
+        uint64_t r = 0;
+        for (const char* p = begin; p != end; ++p) {
+            RAPIDJSON_ASSERT(*p >= '0' && *p <= '9');
+            r = r * 10 + (*p - '0');
+        }
+        return r;
+    }
+
+    // Assume a * b + k < 2^128
+    static uint64_t MulAdd64(uint64_t a, uint64_t b, uint64_t k, uint64_t* outHigh) {
+#if defined(_MSC_VER) && defined(_M_AMD64)
+        uint64_t low = _umul128(a, b, outHigh) + k;
+        if (low < k)
+            (*outHigh)++;
+        return low;
+#elif (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)) && defined(__x86_64__)
+        __extension__ typedef unsigned __int128 uint128;
+        uint128 p = static_cast<uint128>(a) * static_cast<uint128>(b);
+        p += k;
+        *outHigh = p >> 64;
+        return static_cast<uint64_t>(p);
+#else
+        const uint64_t a0 = a & 0xFFFFFFFF, a1 = a >> 32, b0 = b & 0xFFFFFFFF, b1 = b >> 32;
+        uint64_t x0 = a0 * b0, x1 = a0 * b1, x2 = a1 * b0, x3 = a1 * b1;
+        x1 += (x0 >> 32); // can't give carry
+        x1 += x2;
+        if (x1 < x2)
+            x3 += (static_cast<uint64_t>(1) << 32);
+        uint64_t lo = (x1 << 32) + (x0 & 0xFFFFFFFF);
+        uint64_t hi = x3 + (x1 >> 32);
+
+        lo += k;
+        if (lo < k)
+            hi++;
+        *outHigh = hi;
+        return lo;
+#endif
+    }
+
+    static const size_t kBitCount = 3328;  // 64bit * 54 > 10^1000
+    static const size_t kCapacity = kBitCount / sizeof(Type);
+    static const size_t kTypeBit = sizeof(Type) * 8;
+
+    Type digits_[kCapacity];
+    size_t count_;
+};
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_BIGINTEGER_H_

libs/rapidjson/internal/diyfp.h

@@ -0,0 +1,247 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+// This is a C++ header-only implementation of Grisu2 algorithm from the publication:
+// Loitsch, Florian. "Printing floating-point numbers quickly and accurately with
+// integers." ACM Sigplan Notices 45.6 (2010): 233-243.
+
+#ifndef RAPIDJSON_DIYFP_H_
+#define RAPIDJSON_DIYFP_H_
+
+#if defined(_MSC_VER)
+#include <intrin.h>
+#if defined(_M_AMD64)
+#pragma intrinsic(_BitScanReverse64)
+#endif
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(effc++)
+#endif
+
+struct DiyFp {
+    DiyFp() {}
+
+    DiyFp(uint64_t fp, int exp) : f(fp), e(exp) {}
+
+    explicit DiyFp(double d) {
+        union {
+            double d;
+            uint64_t u64;
+        } u = { d };
+
+        int biased_e = (u.u64 & kDpExponentMask) >> kDpSignificandSize;
+        uint64_t significand = (u.u64 & kDpSignificandMask);
+        if (biased_e != 0) {
+            f = significand + kDpHiddenBit;
+            e = biased_e - kDpExponentBias;
+        } 
+        else {
+            f = significand;
+            e = kDpMinExponent + 1;
+        }
+    }
+
+    DiyFp operator-(const DiyFp& rhs) const {
+        return DiyFp(f - rhs.f, e);
+    }
+
+    DiyFp operator*(const DiyFp& rhs) const {
+#if defined(_MSC_VER) && defined(_M_AMD64)
+        uint64_t h;
+        uint64_t l = _umul128(f, rhs.f, &h);
+        if (l & (uint64_t(1) << 63)) // rounding
+            h++;
+        return DiyFp(h, e + rhs.e + 64);
+#elif (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)) && defined(__x86_64__)
+        __extension__ typedef unsigned __int128 uint128;
+        uint128 p = static_cast<uint128>(f) * static_cast<uint128>(rhs.f);
+        uint64_t h = p >> 64;
+        uint64_t l = static_cast<uint64_t>(p);
+        if (l & (uint64_t(1) << 63)) // rounding
+            h++;
+        return DiyFp(h, e + rhs.e + 64);
+#else
+        const uint64_t M32 = 0xFFFFFFFF;
+        const uint64_t a = f >> 32;
+        const uint64_t b = f & M32;
+        const uint64_t c = rhs.f >> 32;
+        const uint64_t d = rhs.f & M32;
+        const uint64_t ac = a * c;
+        const uint64_t bc = b * c;
+        const uint64_t ad = a * d;
+        const uint64_t bd = b * d;
+        uint64_t tmp = (bd >> 32) + (ad & M32) + (bc & M32);
+        tmp += 1U << 31;  /// mult_round
+        return DiyFp(ac + (ad >> 32) + (bc >> 32) + (tmp >> 32), e + rhs.e + 64);
+#endif
+    }
+
+    DiyFp Normalize() const {
+#if defined(_MSC_VER) && defined(_M_AMD64)
+        unsigned long index;
+        _BitScanReverse64(&index, f);
+        return DiyFp(f << (63 - index), e - (63 - index));
+#elif defined(__GNUC__) && __GNUC__ >= 4
+        int s = __builtin_clzll(f);
+        return DiyFp(f << s, e - s);
+#else
+        DiyFp res = *this;
+        while (!(res.f & (static_cast<uint64_t>(1) << 63))) {
+            res.f <<= 1;
+            res.e--;
+        }
+        return res;
+#endif
+    }
+
+    DiyFp NormalizeBoundary() const {
+        DiyFp res = *this;
+        while (!(res.f & (kDpHiddenBit << 1))) {
+            res.f <<= 1;
+            res.e--;
+        }
+        res.f <<= (kDiySignificandSize - kDpSignificandSize - 2);
+        res.e = res.e - (kDiySignificandSize - kDpSignificandSize - 2);
+        return res;
+    }
+
+    void NormalizedBoundaries(DiyFp* minus, DiyFp* plus) const {
+        DiyFp pl = DiyFp((f << 1) + 1, e - 1).NormalizeBoundary();
+        DiyFp mi = (f == kDpHiddenBit) ? DiyFp((f << 2) - 1, e - 2) : DiyFp((f << 1) - 1, e - 1);
+        mi.f <<= mi.e - pl.e;
+        mi.e = pl.e;
+        *plus = pl;
+        *minus = mi;
+    }
+
+    double ToDouble() const {
+        union {
+            double d;
+            uint64_t u64;
+        }u;
+        const uint64_t be = (e == kDpDenormalExponent && (f & kDpHiddenBit) == 0) ? 0 : 
+            static_cast<uint64_t>(e + kDpExponentBias);
+        u.u64 = (f & kDpSignificandMask) | (be << kDpSignificandSize);
+        return u.d;
+    }
+
+    static const int kDiySignificandSize = 64;
+    static const int kDpSignificandSize = 52;
+    static const int kDpExponentBias = 0x3FF + kDpSignificandSize;
+    static const int kDpMaxExponent = 0x7FF - kDpExponentBias;
+    static const int kDpMinExponent = -kDpExponentBias;
+    static const int kDpDenormalExponent = -kDpExponentBias + 1;
+    static const uint64_t kDpExponentMask = RAPIDJSON_UINT64_C2(0x7FF00000, 0x00000000);
+    static const uint64_t kDpSignificandMask = RAPIDJSON_UINT64_C2(0x000FFFFF, 0xFFFFFFFF);
+    static const uint64_t kDpHiddenBit = RAPIDJSON_UINT64_C2(0x00100000, 0x00000000);
+
+    uint64_t f;
+    int e;
+};
+
+inline DiyFp GetCachedPowerByIndex(size_t index) {
+    // 10^-348, 10^-340, ..., 10^340
+    static const uint64_t kCachedPowers_F[] = {
+        RAPIDJSON_UINT64_C2(0xfa8fd5a0, 0x081c0288), RAPIDJSON_UINT64_C2(0xbaaee17f, 0xa23ebf76),
+        RAPIDJSON_UINT64_C2(0x8b16fb20, 0x3055ac76), RAPIDJSON_UINT64_C2(0xcf42894a, 0x5dce35ea),
+        RAPIDJSON_UINT64_C2(0x9a6bb0aa, 0x55653b2d), RAPIDJSON_UINT64_C2(0xe61acf03, 0x3d1a45df),
+        RAPIDJSON_UINT64_C2(0xab70fe17, 0xc79ac6ca), RAPIDJSON_UINT64_C2(0xff77b1fc, 0xbebcdc4f),
+        RAPIDJSON_UINT64_C2(0xbe5691ef, 0x416bd60c), RAPIDJSON_UINT64_C2(0x8dd01fad, 0x907ffc3c),
+        RAPIDJSON_UINT64_C2(0xd3515c28, 0x31559a83), RAPIDJSON_UINT64_C2(0x9d71ac8f, 0xada6c9b5),
+        RAPIDJSON_UINT64_C2(0xea9c2277, 0x23ee8bcb), RAPIDJSON_UINT64_C2(0xaecc4991, 0x4078536d),
+        RAPIDJSON_UINT64_C2(0x823c1279, 0x5db6ce57), RAPIDJSON_UINT64_C2(0xc2109436, 0x4dfb5637),
+        RAPIDJSON_UINT64_C2(0x9096ea6f, 0x3848984f), RAPIDJSON_UINT64_C2(0xd77485cb, 0x25823ac7),
+        RAPIDJSON_UINT64_C2(0xa086cfcd, 0x97bf97f4), RAPIDJSON_UINT64_C2(0xef340a98, 0x172aace5),
+        RAPIDJSON_UINT64_C2(0xb23867fb, 0x2a35b28e), RAPIDJSON_UINT64_C2(0x84c8d4df, 0xd2c63f3b),
+        RAPIDJSON_UINT64_C2(0xc5dd4427, 0x1ad3cdba), RAPIDJSON_UINT64_C2(0x936b9fce, 0xbb25c996),
+        RAPIDJSON_UINT64_C2(0xdbac6c24, 0x7d62a584), RAPIDJSON_UINT64_C2(0xa3ab6658, 0x0d5fdaf6),
+        RAPIDJSON_UINT64_C2(0xf3e2f893, 0xdec3f126), RAPIDJSON_UINT64_C2(0xb5b5ada8, 0xaaff80b8),
+        RAPIDJSON_UINT64_C2(0x87625f05, 0x6c7c4a8b), RAPIDJSON_UINT64_C2(0xc9bcff60, 0x34c13053),
+        RAPIDJSON_UINT64_C2(0x964e858c, 0x91ba2655), RAPIDJSON_UINT64_C2(0xdff97724, 0x70297ebd),
+        RAPIDJSON_UINT64_C2(0xa6dfbd9f, 0xb8e5b88f), RAPIDJSON_UINT64_C2(0xf8a95fcf, 0x88747d94),
+        RAPIDJSON_UINT64_C2(0xb9447093, 0x8fa89bcf), RAPIDJSON_UINT64_C2(0x8a08f0f8, 0xbf0f156b),
+        RAPIDJSON_UINT64_C2(0xcdb02555, 0x653131b6), RAPIDJSON_UINT64_C2(0x993fe2c6, 0xd07b7fac),
+        RAPIDJSON_UINT64_C2(0xe45c10c4, 0x2a2b3b06), RAPIDJSON_UINT64_C2(0xaa242499, 0x697392d3),
+        RAPIDJSON_UINT64_C2(0xfd87b5f2, 0x8300ca0e), RAPIDJSON_UINT64_C2(0xbce50864, 0x92111aeb),
+        RAPIDJSON_UINT64_C2(0x8cbccc09, 0x6f5088cc), RAPIDJSON_UINT64_C2(0xd1b71758, 0xe219652c),
+        RAPIDJSON_UINT64_C2(0x9c400000, 0x00000000), RAPIDJSON_UINT64_C2(0xe8d4a510, 0x00000000),
+        RAPIDJSON_UINT64_C2(0xad78ebc5, 0xac620000), RAPIDJSON_UINT64_C2(0x813f3978, 0xf8940984),
+        RAPIDJSON_UINT64_C2(0xc097ce7b, 0xc90715b3), RAPIDJSON_UINT64_C2(0x8f7e32ce, 0x7bea5c70),
+        RAPIDJSON_UINT64_C2(0xd5d238a4, 0xabe98068), RAPIDJSON_UINT64_C2(0x9f4f2726, 0x179a2245),
+        RAPIDJSON_UINT64_C2(0xed63a231, 0xd4c4fb27), RAPIDJSON_UINT64_C2(0xb0de6538, 0x8cc8ada8),
+        RAPIDJSON_UINT64_C2(0x83c7088e, 0x1aab65db), RAPIDJSON_UINT64_C2(0xc45d1df9, 0x42711d9a),
+        RAPIDJSON_UINT64_C2(0x924d692c, 0xa61be758), RAPIDJSON_UINT64_C2(0xda01ee64, 0x1a708dea),
+        RAPIDJSON_UINT64_C2(0xa26da399, 0x9aef774a), RAPIDJSON_UINT64_C2(0xf209787b, 0xb47d6b85),
+        RAPIDJSON_UINT64_C2(0xb454e4a1, 0x79dd1877), RAPIDJSON_UINT64_C2(0x865b8692, 0x5b9bc5c2),
+        RAPIDJSON_UINT64_C2(0xc83553c5, 0xc8965d3d), RAPIDJSON_UINT64_C2(0x952ab45c, 0xfa97a0b3),
+        RAPIDJSON_UINT64_C2(0xde469fbd, 0x99a05fe3), RAPIDJSON_UINT64_C2(0xa59bc234, 0xdb398c25),
+        RAPIDJSON_UINT64_C2(0xf6c69a72, 0xa3989f5c), RAPIDJSON_UINT64_C2(0xb7dcbf53, 0x54e9bece),
+        RAPIDJSON_UINT64_C2(0x88fcf317, 0xf22241e2), RAPIDJSON_UINT64_C2(0xcc20ce9b, 0xd35c78a5),
+        RAPIDJSON_UINT64_C2(0x98165af3, 0x7b2153df), RAPIDJSON_UINT64_C2(0xe2a0b5dc, 0x971f303a),
+        RAPIDJSON_UINT64_C2(0xa8d9d153, 0x5ce3b396), RAPIDJSON_UINT64_C2(0xfb9b7cd9, 0xa4a7443c),
+        RAPIDJSON_UINT64_C2(0xbb764c4c, 0xa7a44410), RAPIDJSON_UINT64_C2(0x8bab8eef, 0xb6409c1a),
+        RAPIDJSON_UINT64_C2(0xd01fef10, 0xa657842c), RAPIDJSON_UINT64_C2(0x9b10a4e5, 0xe9913129),
+        RAPIDJSON_UINT64_C2(0xe7109bfb, 0xa19c0c9d), RAPIDJSON_UINT64_C2(0xac2820d9, 0x623bf429),
+        RAPIDJSON_UINT64_C2(0x80444b5e, 0x7aa7cf85), RAPIDJSON_UINT64_C2(0xbf21e440, 0x03acdd2d),
+        RAPIDJSON_UINT64_C2(0x8e679c2f, 0x5e44ff8f), RAPIDJSON_UINT64_C2(0xd433179d, 0x9c8cb841),
+        RAPIDJSON_UINT64_C2(0x9e19db92, 0xb4e31ba9), RAPIDJSON_UINT64_C2(0xeb96bf6e, 0xbadf77d9),
+        RAPIDJSON_UINT64_C2(0xaf87023b, 0x9bf0ee6b)
+    };
+    static const int16_t kCachedPowers_E[] = {
+        -1220, -1193, -1166, -1140, -1113, -1087, -1060, -1034, -1007,  -980,
+        -954,  -927,  -901,  -874,  -847,  -821,  -794,  -768,  -741,  -715,
+        -688,  -661,  -635,  -608,  -582,  -555,  -529,  -502,  -475,  -449,
+        -422,  -396,  -369,  -343,  -316,  -289,  -263,  -236,  -210,  -183,
+        -157,  -130,  -103,   -77,   -50,   -24,     3,    30,    56,    83,
+        109,   136,   162,   189,   216,   242,   269,   295,   322,   348,
+        375,   402,   428,   455,   481,   508,   534,   561,   588,   614,
+        641,   667,   694,   720,   747,   774,   800,   827,   853,   880,
+        907,   933,   960,   986,  1013,  1039,  1066
+    };
+    return DiyFp(kCachedPowers_F[index], kCachedPowers_E[index]);
+}
+    
+inline DiyFp GetCachedPower(int e, int* K) {
+
+    //int k = static_cast<int>(ceil((-61 - e) * 0.30102999566398114)) + 374;
+    double dk = (-61 - e) * 0.30102999566398114 + 347;  // dk must be positive, so can do ceiling in positive
+    int k = static_cast<int>(dk);
+    if (dk - k > 0.0)
+        k++;
+
+    unsigned index = static_cast<unsigned>((k >> 3) + 1);
+    *K = -(-348 + static_cast<int>(index << 3));    // decimal exponent no need lookup table
+
+    return GetCachedPowerByIndex(index);
+}
+
+inline DiyFp GetCachedPower10(int exp, int *outExp) {
+     unsigned index = (exp + 348) / 8;
+     *outExp = -348 + index * 8;
+     return GetCachedPowerByIndex(index);
+ }
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_POP
+#endif
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_DIYFP_H_

libs/rapidjson/internal/dtoa.h

@@ -0,0 +1,217 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+// This is a C++ header-only implementation of Grisu2 algorithm from the publication:
+// Loitsch, Florian. "Printing floating-point numbers quickly and accurately with
+// integers." ACM Sigplan Notices 45.6 (2010): 233-243.
+
+#ifndef RAPIDJSON_DTOA_
+#define RAPIDJSON_DTOA_
+
+#include "itoa.h" // GetDigitsLut()
+#include "diyfp.h"
+#include "ieee754.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(effc++)
+#endif
+
+inline void GrisuRound(char* buffer, int len, uint64_t delta, uint64_t rest, uint64_t ten_kappa, uint64_t wp_w) {
+    while (rest < wp_w && delta - rest >= ten_kappa &&
+           (rest + ten_kappa < wp_w ||  /// closer
+            wp_w - rest > rest + ten_kappa - wp_w)) {
+        buffer[len - 1]--;
+        rest += ten_kappa;
+    }
+}
+
+inline unsigned CountDecimalDigit32(uint32_t n) {
+    // Simple pure C++ implementation was faster than __builtin_clz version in this situation.
+    if (n < 10) return 1;
+    if (n < 100) return 2;
+    if (n < 1000) return 3;
+    if (n < 10000) return 4;
+    if (n < 100000) return 5;
+    if (n < 1000000) return 6;
+    if (n < 10000000) return 7;
+    if (n < 100000000) return 8;
+    // Will not reach 10 digits in DigitGen()
+    //if (n < 1000000000) return 9;
+    //return 10;
+    return 9;
+}
+
+inline void DigitGen(const DiyFp& W, const DiyFp& Mp, uint64_t delta, char* buffer, int* len, int* K) {
+    static const uint32_t kPow10[] = { 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, 100000000, 1000000000 };
+    const DiyFp one(uint64_t(1) << -Mp.e, Mp.e);
+    const DiyFp wp_w = Mp - W;
+    uint32_t p1 = static_cast<uint32_t>(Mp.f >> -one.e);
+    uint64_t p2 = Mp.f & (one.f - 1);
+    int kappa = CountDecimalDigit32(p1); // kappa in [0, 9]
+    *len = 0;
+
+    while (kappa > 0) {
+        uint32_t d = 0;
+        switch (kappa) {
+            case  9: d = p1 /  100000000; p1 %=  100000000; break;
+            case  8: d = p1 /   10000000; p1 %=   10000000; break;
+            case  7: d = p1 /    1000000; p1 %=    1000000; break;
+            case  6: d = p1 /     100000; p1 %=     100000; break;
+            case  5: d = p1 /      10000; p1 %=      10000; break;
+            case  4: d = p1 /       1000; p1 %=       1000; break;
+            case  3: d = p1 /        100; p1 %=        100; break;
+            case  2: d = p1 /         10; p1 %=         10; break;
+            case  1: d = p1;              p1 =           0; break;
+            default:;
+        }
+        if (d || *len)
+            buffer[(*len)++] = static_cast<char>('0' + static_cast<char>(d));
+        kappa--;
+        uint64_t tmp = (static_cast<uint64_t>(p1) << -one.e) + p2;
+        if (tmp <= delta) {
+            *K += kappa;
+            GrisuRound(buffer, *len, delta, tmp, static_cast<uint64_t>(kPow10[kappa]) << -one.e, wp_w.f);
+            return;
+        }
+    }
+
+    // kappa = 0
+    for (;;) {
+        p2 *= 10;
+        delta *= 10;
+        char d = static_cast<char>(p2 >> -one.e);
+        if (d || *len)
+            buffer[(*len)++] = static_cast<char>('0' + d);
+        p2 &= one.f - 1;
+        kappa--;
+        if (p2 < delta) {
+            *K += kappa;
+            GrisuRound(buffer, *len, delta, p2, one.f, wp_w.f * kPow10[-kappa]);
+            return;
+        }
+    }
+}
+
+inline void Grisu2(double value, char* buffer, int* length, int* K) {
+    const DiyFp v(value);
+    DiyFp w_m, w_p;
+    v.NormalizedBoundaries(&w_m, &w_p);
+
+    const DiyFp c_mk = GetCachedPower(w_p.e, K);
+    const DiyFp W = v.Normalize() * c_mk;
+    DiyFp Wp = w_p * c_mk;
+    DiyFp Wm = w_m * c_mk;
+    Wm.f++;
+    Wp.f--;
+    DigitGen(W, Wp, Wp.f - Wm.f, buffer, length, K);
+}
+
+inline char* WriteExponent(int K, char* buffer) {
+    if (K < 0) {
+        *buffer++ = '-';
+        K = -K;
+    }
+
+    if (K >= 100) {
+        *buffer++ = static_cast<char>('0' + static_cast<char>(K / 100));
+        K %= 100;
+        const char* d = GetDigitsLut() + K * 2;
+        *buffer++ = d[0];
+        *buffer++ = d[1];
+    }
+    else if (K >= 10) {
+        const char* d = GetDigitsLut() + K * 2;
+        *buffer++ = d[0];
+        *buffer++ = d[1];
+    }
+    else
+        *buffer++ = static_cast<char>('0' + static_cast<char>(K));
+
+    return buffer;
+}
+
+inline char* Prettify(char* buffer, int length, int k) {
+    const int kk = length + k;  // 10^(kk-1) <= v < 10^kk
+
+    if (length <= kk && kk <= 21) {
+        // 1234e7 -> 12340000000
+        for (int i = length; i < kk; i++)
+            buffer[i] = '0';
+        buffer[kk] = '.';
+        buffer[kk + 1] = '0';
+        return &buffer[kk + 2];
+    }
+    else if (0 < kk && kk <= 21) {
+        // 1234e-2 -> 12.34
+        std::memmove(&buffer[kk + 1], &buffer[kk], length - kk);
+        buffer[kk] = '.';
+        return &buffer[length + 1];
+    }
+    else if (-6 < kk && kk <= 0) {
+        // 1234e-6 -> 0.001234
+        const int offset = 2 - kk;
+        std::memmove(&buffer[offset], &buffer[0], length);
+        buffer[0] = '0';
+        buffer[1] = '.';
+        for (int i = 2; i < offset; i++)
+            buffer[i] = '0';
+        return &buffer[length + offset];
+    }
+    else if (length == 1) {
+        // 1e30
+        buffer[1] = 'e';
+        return WriteExponent(kk - 1, &buffer[2]);
+    }
+    else {
+        // 1234e30 -> 1.234e33
+        std::memmove(&buffer[2], &buffer[1], length - 1);
+        buffer[1] = '.';
+        buffer[length + 1] = 'e';
+        return WriteExponent(kk - 1, &buffer[0 + length + 2]);
+    }
+}
+
+inline char* dtoa(double value, char* buffer) {
+    Double d(value);
+    if (d.IsZero()) {
+        if (d.Sign())
+            *buffer++ = '-';     // -0.0, Issue #289
+        buffer[0] = '0';
+        buffer[1] = '.';
+        buffer[2] = '0';
+        return &buffer[3];
+    }
+    else {
+        if (value < 0) {
+            *buffer++ = '-';
+            value = -value;
+        }
+        int length, K;
+        Grisu2(value, buffer, &length, &K);
+        return Prettify(buffer, length, K);
+    }
+}
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_POP
+#endif
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_DTOA_

libs/rapidjson/internal/ieee754.h

@@ -0,0 +1,77 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_IEEE754_
+#define RAPIDJSON_IEEE754_
+
+#include "../rapidjson.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+class Double {
+public:
+    Double() {}
+    Double(double d) : d(d) {}
+    Double(uint64_t u) : u(u) {}
+
+    double Value() const { return d; }
+    uint64_t Uint64Value() const { return u; }
+
+    double NextPositiveDouble() const {
+        RAPIDJSON_ASSERT(!Sign());
+        return Double(u + 1).Value();
+    }
+
+    bool Sign() const { return (u & kSignMask) != 0; }
+    uint64_t Significand() const { return u & kSignificandMask; }
+    int Exponent() const { return ((u & kExponentMask) >> kSignificandSize) - kExponentBias; }
+
+    bool IsNan() const { return (u & kExponentMask) == kExponentMask && Significand() != 0; }
+    bool IsInf() const { return (u & kExponentMask) == kExponentMask && Significand() == 0; }
+    bool IsNormal() const { return (u & kExponentMask) != 0 || Significand() == 0; }
+    bool IsZero() const { return (u & (kExponentMask | kSignificandMask)) == 0; }
+
+    uint64_t IntegerSignificand() const { return IsNormal() ? Significand() | kHiddenBit : Significand(); }
+    int IntegerExponent() const { return (IsNormal() ? Exponent() : kDenormalExponent) - kSignificandSize; }
+    uint64_t ToBias() const { return (u & kSignMask) ? ~u + 1 : u | kSignMask; }
+
+    static unsigned EffectiveSignificandSize(int order) {
+        if (order >= -1021)
+            return 53;
+        else if (order <= -1074)
+            return 0;
+        else
+            return order + 1074;
+    }
+
+private:
+    static const int kSignificandSize = 52;
+    static const int kExponentBias = 0x3FF;
+    static const int kDenormalExponent = 1 - kExponentBias;
+    static const uint64_t kSignMask = RAPIDJSON_UINT64_C2(0x80000000, 0x00000000);
+    static const uint64_t kExponentMask = RAPIDJSON_UINT64_C2(0x7FF00000, 0x00000000);
+    static const uint64_t kSignificandMask = RAPIDJSON_UINT64_C2(0x000FFFFF, 0xFFFFFFFF);
+    static const uint64_t kHiddenBit = RAPIDJSON_UINT64_C2(0x00100000, 0x00000000);
+
+    union {
+        double d;
+        uint64_t u;
+    };
+};
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_IEEE754_

libs/rapidjson/internal/itoa.h

@@ -0,0 +1,304 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_ITOA_
+#define RAPIDJSON_ITOA_
+
+#include "../rapidjson.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+inline const char* GetDigitsLut() {
+    static const char cDigitsLut[200] = {
+        '0','0','0','1','0','2','0','3','0','4','0','5','0','6','0','7','0','8','0','9',
+        '1','0','1','1','1','2','1','3','1','4','1','5','1','6','1','7','1','8','1','9',
+        '2','0','2','1','2','2','2','3','2','4','2','5','2','6','2','7','2','8','2','9',
+        '3','0','3','1','3','2','3','3','3','4','3','5','3','6','3','7','3','8','3','9',
+        '4','0','4','1','4','2','4','3','4','4','4','5','4','6','4','7','4','8','4','9',
+        '5','0','5','1','5','2','5','3','5','4','5','5','5','6','5','7','5','8','5','9',
+        '6','0','6','1','6','2','6','3','6','4','6','5','6','6','6','7','6','8','6','9',
+        '7','0','7','1','7','2','7','3','7','4','7','5','7','6','7','7','7','8','7','9',
+        '8','0','8','1','8','2','8','3','8','4','8','5','8','6','8','7','8','8','8','9',
+        '9','0','9','1','9','2','9','3','9','4','9','5','9','6','9','7','9','8','9','9'
+    };
+    return cDigitsLut;
+}
+
+inline char* u32toa(uint32_t value, char* buffer) {
+    const char* cDigitsLut = GetDigitsLut();
+
+    if (value < 10000) {
+        const uint32_t d1 = (value / 100) << 1;
+        const uint32_t d2 = (value % 100) << 1;
+        
+        if (value >= 1000)
+            *buffer++ = cDigitsLut[d1];
+        if (value >= 100)
+            *buffer++ = cDigitsLut[d1 + 1];
+        if (value >= 10)
+            *buffer++ = cDigitsLut[d2];
+        *buffer++ = cDigitsLut[d2 + 1];
+    }
+    else if (value < 100000000) {
+        // value = bbbbcccc
+        const uint32_t b = value / 10000;
+        const uint32_t c = value % 10000;
+        
+        const uint32_t d1 = (b / 100) << 1;
+        const uint32_t d2 = (b % 100) << 1;
+        
+        const uint32_t d3 = (c / 100) << 1;
+        const uint32_t d4 = (c % 100) << 1;
+        
+        if (value >= 10000000)
+            *buffer++ = cDigitsLut[d1];
+        if (value >= 1000000)
+            *buffer++ = cDigitsLut[d1 + 1];
+        if (value >= 100000)
+            *buffer++ = cDigitsLut[d2];
+        *buffer++ = cDigitsLut[d2 + 1];
+        
+        *buffer++ = cDigitsLut[d3];
+        *buffer++ = cDigitsLut[d3 + 1];
+        *buffer++ = cDigitsLut[d4];
+        *buffer++ = cDigitsLut[d4 + 1];
+    }
+    else {
+        // value = aabbbbcccc in decimal
+        
+        const uint32_t a = value / 100000000; // 1 to 42
+        value %= 100000000;
+        
+        if (a >= 10) {
+            const unsigned i = a << 1;
+            *buffer++ = cDigitsLut[i];
+            *buffer++ = cDigitsLut[i + 1];
+        }
+        else
+            *buffer++ = static_cast<char>('0' + static_cast<char>(a));
+
+        const uint32_t b = value / 10000; // 0 to 9999
+        const uint32_t c = value % 10000; // 0 to 9999
+        
+        const uint32_t d1 = (b / 100) << 1;
+        const uint32_t d2 = (b % 100) << 1;
+        
+        const uint32_t d3 = (c / 100) << 1;
+        const uint32_t d4 = (c % 100) << 1;
+        
+        *buffer++ = cDigitsLut[d1];
+        *buffer++ = cDigitsLut[d1 + 1];
+        *buffer++ = cDigitsLut[d2];
+        *buffer++ = cDigitsLut[d2 + 1];
+        *buffer++ = cDigitsLut[d3];
+        *buffer++ = cDigitsLut[d3 + 1];
+        *buffer++ = cDigitsLut[d4];
+        *buffer++ = cDigitsLut[d4 + 1];
+    }
+    return buffer;
+}
+
+inline char* i32toa(int32_t value, char* buffer) {
+    uint32_t u = static_cast<uint32_t>(value);
+    if (value < 0) {
+        *buffer++ = '-';
+        u = ~u + 1;
+    }
+
+    return u32toa(u, buffer);
+}
+
+inline char* u64toa(uint64_t value, char* buffer) {
+    const char* cDigitsLut = GetDigitsLut();
+    const uint64_t  kTen8 = 100000000;
+    const uint64_t  kTen9 = kTen8 * 10;
+    const uint64_t kTen10 = kTen8 * 100;
+    const uint64_t kTen11 = kTen8 * 1000;
+    const uint64_t kTen12 = kTen8 * 10000;
+    const uint64_t kTen13 = kTen8 * 100000;
+    const uint64_t kTen14 = kTen8 * 1000000;
+    const uint64_t kTen15 = kTen8 * 10000000;
+    const uint64_t kTen16 = kTen8 * kTen8;
+    
+    if (value < kTen8) {
+        uint32_t v = static_cast<uint32_t>(value);
+        if (v < 10000) {
+            const uint32_t d1 = (v / 100) << 1;
+            const uint32_t d2 = (v % 100) << 1;
+            
+            if (v >= 1000)
+                *buffer++ = cDigitsLut[d1];
+            if (v >= 100)
+                *buffer++ = cDigitsLut[d1 + 1];
+            if (v >= 10)
+                *buffer++ = cDigitsLut[d2];
+            *buffer++ = cDigitsLut[d2 + 1];
+        }
+        else {
+            // value = bbbbcccc
+            const uint32_t b = v / 10000;
+            const uint32_t c = v % 10000;
+            
+            const uint32_t d1 = (b / 100) << 1;
+            const uint32_t d2 = (b % 100) << 1;
+            
+            const uint32_t d3 = (c / 100) << 1;
+            const uint32_t d4 = (c % 100) << 1;
+            
+            if (value >= 10000000)
+                *buffer++ = cDigitsLut[d1];
+            if (value >= 1000000)
+                *buffer++ = cDigitsLut[d1 + 1];
+            if (value >= 100000)
+                *buffer++ = cDigitsLut[d2];
+            *buffer++ = cDigitsLut[d2 + 1];
+            
+            *buffer++ = cDigitsLut[d3];
+            *buffer++ = cDigitsLut[d3 + 1];
+            *buffer++ = cDigitsLut[d4];
+            *buffer++ = cDigitsLut[d4 + 1];
+        }
+    }
+    else if (value < kTen16) {
+        const uint32_t v0 = static_cast<uint32_t>(value / kTen8);
+        const uint32_t v1 = static_cast<uint32_t>(value % kTen8);
+        
+        const uint32_t b0 = v0 / 10000;
+        const uint32_t c0 = v0 % 10000;
+        
+        const uint32_t d1 = (b0 / 100) << 1;
+        const uint32_t d2 = (b0 % 100) << 1;
+        
+        const uint32_t d3 = (c0 / 100) << 1;
+        const uint32_t d4 = (c0 % 100) << 1;
+
+        const uint32_t b1 = v1 / 10000;
+        const uint32_t c1 = v1 % 10000;
+        
+        const uint32_t d5 = (b1 / 100) << 1;
+        const uint32_t d6 = (b1 % 100) << 1;
+        
+        const uint32_t d7 = (c1 / 100) << 1;
+        const uint32_t d8 = (c1 % 100) << 1;
+
+        if (value >= kTen15)
+            *buffer++ = cDigitsLut[d1];
+        if (value >= kTen14)
+            *buffer++ = cDigitsLut[d1 + 1];
+        if (value >= kTen13)
+            *buffer++ = cDigitsLut[d2];
+        if (value >= kTen12)
+            *buffer++ = cDigitsLut[d2 + 1];
+        if (value >= kTen11)
+            *buffer++ = cDigitsLut[d3];
+        if (value >= kTen10)
+            *buffer++ = cDigitsLut[d3 + 1];
+        if (value >= kTen9)
+            *buffer++ = cDigitsLut[d4];
+        if (value >= kTen8)
+            *buffer++ = cDigitsLut[d4 + 1];
+        
+        *buffer++ = cDigitsLut[d5];
+        *buffer++ = cDigitsLut[d5 + 1];
+        *buffer++ = cDigitsLut[d6];
+        *buffer++ = cDigitsLut[d6 + 1];
+        *buffer++ = cDigitsLut[d7];
+        *buffer++ = cDigitsLut[d7 + 1];
+        *buffer++ = cDigitsLut[d8];
+        *buffer++ = cDigitsLut[d8 + 1];
+    }
+    else {
+        const uint32_t a = static_cast<uint32_t>(value / kTen16); // 1 to 1844
+        value %= kTen16;
+        
+        if (a < 10)
+            *buffer++ = static_cast<char>('0' + static_cast<char>(a));
+        else if (a < 100) {
+            const uint32_t i = a << 1;
+            *buffer++ = cDigitsLut[i];
+            *buffer++ = cDigitsLut[i + 1];
+        }
+        else if (a < 1000) {
+            *buffer++ = static_cast<char>('0' + static_cast<char>(a / 100));
+            
+            const uint32_t i = (a % 100) << 1;
+            *buffer++ = cDigitsLut[i];
+            *buffer++ = cDigitsLut[i + 1];
+        }
+        else {
+            const uint32_t i = (a / 100) << 1;
+            const uint32_t j = (a % 100) << 1;
+            *buffer++ = cDigitsLut[i];
+            *buffer++ = cDigitsLut[i + 1];
+            *buffer++ = cDigitsLut[j];
+            *buffer++ = cDigitsLut[j + 1];
+        }
+        
+        const uint32_t v0 = static_cast<uint32_t>(value / kTen8);
+        const uint32_t v1 = static_cast<uint32_t>(value % kTen8);
+        
+        const uint32_t b0 = v0 / 10000;
+        const uint32_t c0 = v0 % 10000;
+        
+        const uint32_t d1 = (b0 / 100) << 1;
+        const uint32_t d2 = (b0 % 100) << 1;
+        
+        const uint32_t d3 = (c0 / 100) << 1;
+        const uint32_t d4 = (c0 % 100) << 1;
+        
+        const uint32_t b1 = v1 / 10000;
+        const uint32_t c1 = v1 % 10000;
+        
+        const uint32_t d5 = (b1 / 100) << 1;
+        const uint32_t d6 = (b1 % 100) << 1;
+        
+        const uint32_t d7 = (c1 / 100) << 1;
+        const uint32_t d8 = (c1 % 100) << 1;
+        
+        *buffer++ = cDigitsLut[d1];
+        *buffer++ = cDigitsLut[d1 + 1];
+        *buffer++ = cDigitsLut[d2];
+        *buffer++ = cDigitsLut[d2 + 1];
+        *buffer++ = cDigitsLut[d3];
+        *buffer++ = cDigitsLut[d3 + 1];
+        *buffer++ = cDigitsLut[d4];
+        *buffer++ = cDigitsLut[d4 + 1];
+        *buffer++ = cDigitsLut[d5];
+        *buffer++ = cDigitsLut[d5 + 1];
+        *buffer++ = cDigitsLut[d6];
+        *buffer++ = cDigitsLut[d6 + 1];
+        *buffer++ = cDigitsLut[d7];
+        *buffer++ = cDigitsLut[d7 + 1];
+        *buffer++ = cDigitsLut[d8];
+        *buffer++ = cDigitsLut[d8 + 1];
+    }
+    
+    return buffer;
+}
+
+inline char* i64toa(int64_t value, char* buffer) {
+    uint64_t u = static_cast<uint64_t>(value);
+    if (value < 0) {
+        *buffer++ = '-';
+        u = ~u + 1;
+    }
+
+    return u64toa(u, buffer);
+}
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_ITOA_

libs/rapidjson/internal/meta.h

@@ -0,0 +1,183 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_INTERNAL_META_H_
+#define RAPIDJSON_INTERNAL_META_H_
+
+#ifndef RAPIDJSON_RAPIDJSON_H_
+#error <rapidjson.h> not yet included. Do not include this file directly.
+#endif
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(effc++)
+#endif
+#if defined(_MSC_VER)
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(6334)
+#endif
+
+#if RAPIDJSON_HAS_CXX11_TYPETRAITS
+#include <type_traits>
+#endif
+
+//@cond RAPIDJSON_INTERNAL
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+// Helper to wrap/convert arbitrary types to void, useful for arbitrary type matching
+template <typename T> struct Void { typedef void Type; };
+
+///////////////////////////////////////////////////////////////////////////////
+// BoolType, TrueType, FalseType
+//
+template <bool Cond> struct BoolType {
+    static const bool Value = Cond;
+    typedef BoolType Type;
+};
+typedef BoolType<true> TrueType;
+typedef BoolType<false> FalseType;
+
+
+///////////////////////////////////////////////////////////////////////////////
+// SelectIf, BoolExpr, NotExpr, AndExpr, OrExpr
+//
+
+template <bool C> struct SelectIfImpl { template <typename T1, typename T2> struct Apply { typedef T1 Type; }; };
+template <> struct SelectIfImpl<false> { template <typename T1, typename T2> struct Apply { typedef T2 Type; }; };
+template <bool C, typename T1, typename T2> struct SelectIfCond : SelectIfImpl<C>::template Apply<T1,T2> {};
+template <typename C, typename T1, typename T2> struct SelectIf : SelectIfCond<C::Value, T1, T2> {};
+
+template <bool Cond1, bool Cond2> struct AndExprCond : FalseType {};
+template <> struct AndExprCond<true, true> : TrueType {};
+template <bool Cond1, bool Cond2> struct OrExprCond : TrueType {};
+template <> struct OrExprCond<false, false> : FalseType {};
+
+template <typename C> struct BoolExpr : SelectIf<C,TrueType,FalseType>::Type {};
+template <typename C> struct NotExpr  : SelectIf<C,FalseType,TrueType>::Type {};
+template <typename C1, typename C2> struct AndExpr : AndExprCond<C1::Value, C2::Value>::Type {};
+template <typename C1, typename C2> struct OrExpr  : OrExprCond<C1::Value, C2::Value>::Type {};
+
+
+///////////////////////////////////////////////////////////////////////////////
+// AddConst, MaybeAddConst, RemoveConst
+template <typename T> struct AddConst { typedef const T Type; };
+template <bool Constify, typename T> struct MaybeAddConst : SelectIfCond<Constify, const T, T> {};
+template <typename T> struct RemoveConst { typedef T Type; };
+template <typename T> struct RemoveConst<const T> { typedef T Type; };
+
+
+///////////////////////////////////////////////////////////////////////////////
+// IsSame, IsConst, IsMoreConst, IsPointer
+//
+template <typename T, typename U> struct IsSame : FalseType {};
+template <typename T> struct IsSame<T, T> : TrueType {};
+
+template <typename T> struct IsConst : FalseType {};
+template <typename T> struct IsConst<const T> : TrueType {};
+
+template <typename CT, typename T>
+struct IsMoreConst
+    : AndExpr<IsSame<typename RemoveConst<CT>::Type, typename RemoveConst<T>::Type>,
+              BoolType<IsConst<CT>::Value >= IsConst<T>::Value> >::Type {};
+
+template <typename T> struct IsPointer : FalseType {};
+template <typename T> struct IsPointer<T*> : TrueType {};
+
+///////////////////////////////////////////////////////////////////////////////
+// IsBaseOf
+//
+#if RAPIDJSON_HAS_CXX11_TYPETRAITS
+
+template <typename B, typename D> struct IsBaseOf
+    : BoolType< ::std::is_base_of<B,D>::value> {};
+
+#else // simplified version adopted from Boost
+
+template<typename B, typename D> struct IsBaseOfImpl {
+    RAPIDJSON_STATIC_ASSERT(sizeof(B) != 0);
+    RAPIDJSON_STATIC_ASSERT(sizeof(D) != 0);
+
+    typedef char (&Yes)[1];
+    typedef char (&No) [2];
+
+    template <typename T>
+    static Yes Check(const D*, T);
+    static No  Check(const B*, int);
+
+    struct Host {
+        operator const B*() const;
+        operator const D*();
+    };
+
+    enum { Value = (sizeof(Check(Host(), 0)) == sizeof(Yes)) };
+};
+
+template <typename B, typename D> struct IsBaseOf
+    : OrExpr<IsSame<B, D>, BoolExpr<IsBaseOfImpl<B, D> > >::Type {};
+
+#endif // RAPIDJSON_HAS_CXX11_TYPETRAITS
+
+
+//////////////////////////////////////////////////////////////////////////
+// EnableIf / DisableIf
+//
+template <bool Condition, typename T = void> struct EnableIfCond  { typedef T Type; };
+template <typename T> struct EnableIfCond<false, T> { /* empty */ };
+
+template <bool Condition, typename T = void> struct DisableIfCond { typedef T Type; };
+template <typename T> struct DisableIfCond<true, T> { /* empty */ };
+
+template <typename Condition, typename T = void>
+struct EnableIf : EnableIfCond<Condition::Value, T> {};
+
+template <typename Condition, typename T = void>
+struct DisableIf : DisableIfCond<Condition::Value, T> {};
+
+// SFINAE helpers
+struct SfinaeTag {};
+template <typename T> struct RemoveSfinaeTag;
+template <typename T> struct RemoveSfinaeTag<SfinaeTag&(*)(T)> { typedef T Type; };
+
+#define RAPIDJSON_REMOVEFPTR_(type) \
+    typename ::RAPIDJSON_NAMESPACE::internal::RemoveSfinaeTag \
+        < ::RAPIDJSON_NAMESPACE::internal::SfinaeTag&(*) type>::Type
+
+#define RAPIDJSON_ENABLEIF(cond) \
+    typename ::RAPIDJSON_NAMESPACE::internal::EnableIf \
+        <RAPIDJSON_REMOVEFPTR_(cond)>::Type * = NULL
+
+#define RAPIDJSON_DISABLEIF(cond) \
+    typename ::RAPIDJSON_NAMESPACE::internal::DisableIf \
+        <RAPIDJSON_REMOVEFPTR_(cond)>::Type * = NULL
+
+#define RAPIDJSON_ENABLEIF_RETURN(cond,returntype) \
+    typename ::RAPIDJSON_NAMESPACE::internal::EnableIf \
+        <RAPIDJSON_REMOVEFPTR_(cond), \
+         RAPIDJSON_REMOVEFPTR_(returntype)>::Type
+
+#define RAPIDJSON_DISABLEIF_RETURN(cond,returntype) \
+    typename ::RAPIDJSON_NAMESPACE::internal::DisableIf \
+        <RAPIDJSON_REMOVEFPTR_(cond), \
+         RAPIDJSON_REMOVEFPTR_(returntype)>::Type
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+//@endcond
+
+#if defined(__GNUC__) || defined(_MSC_VER)
+RAPIDJSON_DIAG_POP
+#endif
+
+#endif // RAPIDJSON_INTERNAL_META_H_

libs/rapidjson/internal/pow10.h

@@ -0,0 +1,53 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_POW10_
+#define RAPIDJSON_POW10_
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+//! Computes integer powers of 10 in double (10.0^n).
+/*! This function uses lookup table for fast and accurate results.
+    \param n non-negative exponent. Must <= 308.
+    \return 10.0^n
+*/
+inline double Pow10(int n) {
+    static const double e[] = { // 1e-0...1e308: 309 * 8 bytes = 2472 bytes
+        1e+0,  
+        1e+1,  1e+2,  1e+3,  1e+4,  1e+5,  1e+6,  1e+7,  1e+8,  1e+9,  1e+10, 1e+11, 1e+12, 1e+13, 1e+14, 1e+15, 1e+16, 1e+17, 1e+18, 1e+19, 1e+20, 
+        1e+21, 1e+22, 1e+23, 1e+24, 1e+25, 1e+26, 1e+27, 1e+28, 1e+29, 1e+30, 1e+31, 1e+32, 1e+33, 1e+34, 1e+35, 1e+36, 1e+37, 1e+38, 1e+39, 1e+40,
+        1e+41, 1e+42, 1e+43, 1e+44, 1e+45, 1e+46, 1e+47, 1e+48, 1e+49, 1e+50, 1e+51, 1e+52, 1e+53, 1e+54, 1e+55, 1e+56, 1e+57, 1e+58, 1e+59, 1e+60,
+        1e+61, 1e+62, 1e+63, 1e+64, 1e+65, 1e+66, 1e+67, 1e+68, 1e+69, 1e+70, 1e+71, 1e+72, 1e+73, 1e+74, 1e+75, 1e+76, 1e+77, 1e+78, 1e+79, 1e+80,
+        1e+81, 1e+82, 1e+83, 1e+84, 1e+85, 1e+86, 1e+87, 1e+88, 1e+89, 1e+90, 1e+91, 1e+92, 1e+93, 1e+94, 1e+95, 1e+96, 1e+97, 1e+98, 1e+99, 1e+100,
+        1e+101,1e+102,1e+103,1e+104,1e+105,1e+106,1e+107,1e+108,1e+109,1e+110,1e+111,1e+112,1e+113,1e+114,1e+115,1e+116,1e+117,1e+118,1e+119,1e+120,
+        1e+121,1e+122,1e+123,1e+124,1e+125,1e+126,1e+127,1e+128,1e+129,1e+130,1e+131,1e+132,1e+133,1e+134,1e+135,1e+136,1e+137,1e+138,1e+139,1e+140,
+        1e+141,1e+142,1e+143,1e+144,1e+145,1e+146,1e+147,1e+148,1e+149,1e+150,1e+151,1e+152,1e+153,1e+154,1e+155,1e+156,1e+157,1e+158,1e+159,1e+160,
+        1e+161,1e+162,1e+163,1e+164,1e+165,1e+166,1e+167,1e+168,1e+169,1e+170,1e+171,1e+172,1e+173,1e+174,1e+175,1e+176,1e+177,1e+178,1e+179,1e+180,
+        1e+181,1e+182,1e+183,1e+184,1e+185,1e+186,1e+187,1e+188,1e+189,1e+190,1e+191,1e+192,1e+193,1e+194,1e+195,1e+196,1e+197,1e+198,1e+199,1e+200,
+        1e+201,1e+202,1e+203,1e+204,1e+205,1e+206,1e+207,1e+208,1e+209,1e+210,1e+211,1e+212,1e+213,1e+214,1e+215,1e+216,1e+217,1e+218,1e+219,1e+220,
+        1e+221,1e+222,1e+223,1e+224,1e+225,1e+226,1e+227,1e+228,1e+229,1e+230,1e+231,1e+232,1e+233,1e+234,1e+235,1e+236,1e+237,1e+238,1e+239,1e+240,
+        1e+241,1e+242,1e+243,1e+244,1e+245,1e+246,1e+247,1e+248,1e+249,1e+250,1e+251,1e+252,1e+253,1e+254,1e+255,1e+256,1e+257,1e+258,1e+259,1e+260,
+        1e+261,1e+262,1e+263,1e+264,1e+265,1e+266,1e+267,1e+268,1e+269,1e+270,1e+271,1e+272,1e+273,1e+274,1e+275,1e+276,1e+277,1e+278,1e+279,1e+280,
+        1e+281,1e+282,1e+283,1e+284,1e+285,1e+286,1e+287,1e+288,1e+289,1e+290,1e+291,1e+292,1e+293,1e+294,1e+295,1e+296,1e+297,1e+298,1e+299,1e+300,
+        1e+301,1e+302,1e+303,1e+304,1e+305,1e+306,1e+307,1e+308
+    };
+    RAPIDJSON_ASSERT(n >= 0 && n <= 308);
+    return e[n];
+}
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_POW10_

libs/rapidjson/internal/stack.h

@@ -0,0 +1,177 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_INTERNAL_STACK_H_
+#define RAPIDJSON_INTERNAL_STACK_H_
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+///////////////////////////////////////////////////////////////////////////////
+// Stack
+
+//! A type-unsafe stack for storing different types of data.
+/*! \tparam Allocator Allocator for allocating stack memory.
+*/
+template <typename Allocator>
+class Stack {
+public:
+    // Optimization note: Do not allocate memory for stack_ in constructor.
+    // Do it lazily when first Push() -> Expand() -> Resize().
+    Stack(Allocator* allocator, size_t stackCapacity) : allocator_(allocator), ownAllocator_(0), stack_(0), stackTop_(0), stackEnd_(0), initialCapacity_(stackCapacity) {
+        RAPIDJSON_ASSERT(stackCapacity > 0);
+    }
+
+#if RAPIDJSON_HAS_CXX11_RVALUE_REFS
+    Stack(Stack&& rhs)
+        : allocator_(rhs.allocator_),
+          ownAllocator_(rhs.ownAllocator_),
+          stack_(rhs.stack_),
+          stackTop_(rhs.stackTop_),
+          stackEnd_(rhs.stackEnd_),
+          initialCapacity_(rhs.initialCapacity_)
+    {
+        rhs.allocator_ = 0;
+        rhs.ownAllocator_ = 0;
+        rhs.stack_ = 0;
+        rhs.stackTop_ = 0;
+        rhs.stackEnd_ = 0;
+        rhs.initialCapacity_ = 0;
+    }
+#endif
+
+    ~Stack() {
+        Destroy();
+    }
+
+#if RAPIDJSON_HAS_CXX11_RVALUE_REFS
+    Stack& operator=(Stack&& rhs) {
+        if (&rhs != this)
+        {
+            Destroy();
+
+            allocator_ = rhs.allocator_;
+            ownAllocator_ = rhs.ownAllocator_;
+            stack_ = rhs.stack_;
+            stackTop_ = rhs.stackTop_;
+            stackEnd_ = rhs.stackEnd_;
+            initialCapacity_ = rhs.initialCapacity_;
+
+            rhs.allocator_ = 0;
+            rhs.ownAllocator_ = 0;
+            rhs.stack_ = 0;
+            rhs.stackTop_ = 0;
+            rhs.stackEnd_ = 0;
+            rhs.initialCapacity_ = 0;
+        }
+        return *this;
+    }
+#endif
+
+    void Clear() { stackTop_ = stack_; }
+
+    void ShrinkToFit() { 
+        if (Empty()) {
+            // If the stack is empty, completely deallocate the memory.
+            Allocator::Free(stack_);
+            stack_ = 0;
+            stackTop_ = 0;
+            stackEnd_ = 0;
+        }
+        else
+            Resize(GetSize());
+    }
+
+    // Optimization note: try to minimize the size of this function for force inline.
+    // Expansion is run very infrequently, so it is moved to another (probably non-inline) function.
+    template<typename T>
+    RAPIDJSON_FORCEINLINE T* Push(size_t count = 1) {
+         // Expand the stack if needed
+        if (stackTop_ + sizeof(T) * count >= stackEnd_)
+            Expand<T>(count);
+
+        T* ret = reinterpret_cast<T*>(stackTop_);
+        stackTop_ += sizeof(T) * count;
+        return ret;
+    }
+
+    template<typename T>
+    T* Pop(size_t count) {
+        RAPIDJSON_ASSERT(GetSize() >= count * sizeof(T));
+        stackTop_ -= count * sizeof(T);
+        return reinterpret_cast<T*>(stackTop_);
+    }
+
+    template<typename T>
+    T* Top() { 
+        RAPIDJSON_ASSERT(GetSize() >= sizeof(T));
+        return reinterpret_cast<T*>(stackTop_ - sizeof(T));
+    }
+
+    template<typename T>
+    T* Bottom() { return (T*)stack_; }
+
+    Allocator& GetAllocator() { return *allocator_; }
+    bool Empty() const { return stackTop_ == stack_; }
+    size_t GetSize() const { return static_cast<size_t>(stackTop_ - stack_); }
+    size_t GetCapacity() const { return static_cast<size_t>(stackEnd_ - stack_); }
+
+private:
+    template<typename T>
+    void Expand(size_t count) {
+        // Only expand the capacity if the current stack exists. Otherwise just create a stack with initial capacity.
+        size_t newCapacity;
+        if (stack_ == 0) {
+            if (!allocator_)
+                ownAllocator_ = allocator_ = RAPIDJSON_NEW(Allocator());
+            newCapacity = initialCapacity_;
+        } else {
+            newCapacity = GetCapacity();
+            newCapacity += (newCapacity + 1) / 2;
+        }
+        size_t newSize = GetSize() + sizeof(T) * count;
+        if (newCapacity < newSize)
+            newCapacity = newSize;
+
+        Resize(newCapacity);
+    }
+
+    void Resize(size_t newCapacity) {
+        const size_t size = GetSize();  // Backup the current size
+        stack_ = (char*)allocator_->Realloc(stack_, GetCapacity(), newCapacity);
+        stackTop_ = stack_ + size;
+        stackEnd_ = stack_ + newCapacity;
+    }
+
+    void Destroy() {
+        Allocator::Free(stack_);
+        RAPIDJSON_DELETE(ownAllocator_); // Only delete if it is owned by the stack
+    }
+
+    // Prohibit copy constructor & assignment operator.
+    Stack(const Stack&);
+    Stack& operator=(const Stack&);
+
+    Allocator* allocator_;
+    Allocator* ownAllocator_;
+    char *stack_;
+    char *stackTop_;
+    char *stackEnd_;
+    size_t initialCapacity_;
+};
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_STACK_H_

libs/rapidjson/internal/strfunc.h

@@ -0,0 +1,37 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_INTERNAL_STRFUNC_H_
+#define RAPIDJSON_INTERNAL_STRFUNC_H_
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+//! Custom strlen() which works on different character types.
+/*! \tparam Ch Character type (e.g. char, wchar_t, short)
+    \param s Null-terminated input string.
+    \return Number of characters in the string. 
+    \note This has the same semantics as strlen(), the return value is not number of Unicode codepoints.
+*/
+template <typename Ch>
+inline SizeType StrLen(const Ch* s) {
+    const Ch* p = s;
+    while (*p) ++p;
+    return SizeType(p - s);
+}
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_INTERNAL_STRFUNC_H_

libs/rapidjson/internal/strtod.h

@@ -0,0 +1,265 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_STRTOD_
+#define RAPIDJSON_STRTOD_
+
+#include "../rapidjson.h"
+#include "ieee754.h"
+#include "biginteger.h"
+#include "diyfp.h"
+#include "pow10.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+namespace internal {
+
+inline double FastPath(double significand, int exp) {
+    if (exp < -308)
+        return 0.0;
+    else if (exp >= 0)
+        return significand * internal::Pow10(exp);
+    else
+        return significand / internal::Pow10(-exp);
+}
+
+inline double StrtodNormalPrecision(double d, int p) {
+    if (p < -308) {
+        // Prevent expSum < -308, making Pow10(p) = 0
+        d = FastPath(d, -308);
+        d = FastPath(d, p + 308);
+    }
+    else
+        d = FastPath(d, p);
+    return d;
+}
+
+template <typename T>
+inline T Min3(T a, T b, T c) {
+    T m = a;
+    if (m > b) m = b;
+    if (m > c) m = c;
+    return m;
+}
+
+inline int CheckWithinHalfULP(double b, const BigInteger& d, int dExp) {
+    const Double db(b);
+    const uint64_t bInt = db.IntegerSignificand();
+    const int bExp = db.IntegerExponent();
+    const int hExp = bExp - 1;
+
+    int dS_Exp2 = 0, dS_Exp5 = 0, bS_Exp2 = 0, bS_Exp5 = 0, hS_Exp2 = 0, hS_Exp5 = 0;
+
+    // Adjust for decimal exponent
+    if (dExp >= 0) {
+        dS_Exp2 += dExp;
+        dS_Exp5 += dExp;
+    }
+    else {
+        bS_Exp2 -= dExp;
+        bS_Exp5 -= dExp;
+        hS_Exp2 -= dExp;
+        hS_Exp5 -= dExp;
+    }
+
+    // Adjust for binary exponent
+    if (bExp >= 0)
+        bS_Exp2 += bExp;
+    else {
+        dS_Exp2 -= bExp;
+        hS_Exp2 -= bExp;
+    }
+
+    // Adjust for half ulp exponent
+    if (hExp >= 0)
+        hS_Exp2 += hExp;
+    else {
+        dS_Exp2 -= hExp;
+        bS_Exp2 -= hExp;
+    }
+
+    // Remove common power of two factor from all three scaled values
+    int common_Exp2 = Min3(dS_Exp2, bS_Exp2, hS_Exp2);
+    dS_Exp2 -= common_Exp2;
+    bS_Exp2 -= common_Exp2;
+    hS_Exp2 -= common_Exp2;
+
+    BigInteger dS = d;
+    dS.MultiplyPow5(dS_Exp5) <<= dS_Exp2;
+
+    BigInteger bS(bInt);
+    bS.MultiplyPow5(bS_Exp5) <<= bS_Exp2;
+
+    BigInteger hS(1);
+    hS.MultiplyPow5(hS_Exp5) <<= hS_Exp2;
+
+    BigInteger delta(0);
+    dS.Difference(bS, &delta);
+
+    return delta.Compare(hS);
+}
+
+inline bool StrtodFast(double d, int p, double* result) {
+    // Use fast path for string-to-double conversion if possible
+    // see http://www.exploringbinary.com/fast-path-decimal-to-floating-point-conversion/
+    if (p > 22  && p < 22 + 16) {
+        // Fast Path Cases In Disguise
+        d *= internal::Pow10(p - 22);
+        p = 22;
+    }
+
+    if (p >= -22 && p <= 22 && d <= 9007199254740991.0) { // 2^53 - 1
+        *result = FastPath(d, p);
+        return true;
+    }
+    else
+        return false;
+}
+
+// Compute an approximation and see if it is within 1/2 ULP
+inline bool StrtodDiyFp(const char* decimals, size_t length, size_t decimalPosition, int exp, double* result) {
+    uint64_t significand = 0;
+    size_t i = 0;   // 2^64 - 1 = 18446744073709551615, 1844674407370955161 = 0x1999999999999999    
+    for (; i < length; i++) {
+        if (significand  >  RAPIDJSON_UINT64_C2(0x19999999, 0x99999999) ||
+            (significand == RAPIDJSON_UINT64_C2(0x19999999, 0x99999999) && decimals[i] > '5'))
+            break;
+        significand = significand * 10 + (decimals[i] - '0');
+    }
+    
+    if (i < length && decimals[i] >= '5') // Rounding
+        significand++;
+
+    size_t remaining = length - i;
+    const unsigned kUlpShift = 3;
+    const unsigned kUlp = 1 << kUlpShift;
+    int error = (remaining == 0) ? 0 : kUlp / 2;
+
+    DiyFp v(significand, 0);
+    v = v.Normalize();
+    error <<= -v.e;
+
+    const int dExp = (int)decimalPosition - (int)i + exp;
+
+    int actualExp;
+    DiyFp cachedPower = GetCachedPower10(dExp, &actualExp);
+    if (actualExp != dExp) {
+        static const DiyFp kPow10[] = {
+            DiyFp(RAPIDJSON_UINT64_C2(0xa0000000, 00000000), -60),  // 10^1
+            DiyFp(RAPIDJSON_UINT64_C2(0xc8000000, 00000000), -57),  // 10^2
+            DiyFp(RAPIDJSON_UINT64_C2(0xfa000000, 00000000), -54),  // 10^3
+            DiyFp(RAPIDJSON_UINT64_C2(0x9c400000, 00000000), -50),  // 10^4
+            DiyFp(RAPIDJSON_UINT64_C2(0xc3500000, 00000000), -47),  // 10^5
+            DiyFp(RAPIDJSON_UINT64_C2(0xf4240000, 00000000), -44),  // 10^6
+            DiyFp(RAPIDJSON_UINT64_C2(0x98968000, 00000000), -40)   // 10^7
+        };
+        int adjustment = dExp - actualExp - 1;
+        RAPIDJSON_ASSERT(adjustment >= 0 && adjustment < 7);
+        v = v * kPow10[adjustment];
+        if (length + adjustment > 19) // has more digits than decimal digits in 64-bit
+            error += kUlp / 2;
+    }
+
+    v = v * cachedPower;
+
+    error += kUlp + (error == 0 ? 0 : 1);
+
+    const int oldExp = v.e;
+    v = v.Normalize();
+    error <<= oldExp - v.e;
+
+    const unsigned effectiveSignificandSize = Double::EffectiveSignificandSize(64 + v.e);
+    unsigned precisionSize = 64 - effectiveSignificandSize;
+    if (precisionSize + kUlpShift >= 64) {
+        unsigned scaleExp = (precisionSize + kUlpShift) - 63;
+        v.f >>= scaleExp;
+        v.e += scaleExp; 
+        error = (error >> scaleExp) + 1 + kUlp;
+        precisionSize -= scaleExp;
+    }
+
+    DiyFp rounded(v.f >> precisionSize, v.e + precisionSize);
+    const uint64_t precisionBits = (v.f & ((uint64_t(1) << precisionSize) - 1)) * kUlp;
+    const uint64_t halfWay = (uint64_t(1) << (precisionSize - 1)) * kUlp;
+    if (precisionBits >= halfWay + error)
+        rounded.f++;
+
+    *result = rounded.ToDouble();
+
+    return halfWay - error >= precisionBits || precisionBits >= halfWay + error;
+}
+
+inline double StrtodBigInteger(double approx, const char* decimals, size_t length, size_t decimalPosition, int exp) {
+    const BigInteger dInt(decimals, length);
+    const int dExp = (int)decimalPosition - (int)length + exp;
+    Double a(approx);
+    int cmp = CheckWithinHalfULP(a.Value(), dInt, dExp);
+    if (cmp < 0)
+        return a.Value();  // within half ULP
+    else if (cmp == 0) {
+        // Round towards even
+        if (a.Significand() & 1)
+            return a.NextPositiveDouble();
+        else
+            return a.Value();
+    }
+    else // adjustment
+        return a.NextPositiveDouble();
+}
+
+inline double StrtodFullPrecision(double d, int p, const char* decimals, size_t length, size_t decimalPosition, int exp) {
+    RAPIDJSON_ASSERT(d >= 0.0);
+    RAPIDJSON_ASSERT(length >= 1);
+
+    double result;
+    if (StrtodFast(d, p, &result))
+        return result;
+
+    // Trim leading zeros
+    while (*decimals == '0' && length > 1) {
+        length--;
+        decimals++;
+        decimalPosition--;
+    }
+
+    // Trim trailing zeros
+    while (decimals[length - 1] == '0' && length > 1) {
+        length--;
+        decimalPosition--;
+        exp++;
+    }
+
+    // Trim right-most digits
+    const int kMaxDecimalDigit = 780;
+    if ((int)length > kMaxDecimalDigit) {
+        int delta = (int(length) - kMaxDecimalDigit);
+        exp += delta;
+        decimalPosition -= delta;
+        length = kMaxDecimalDigit;
+    }
+
+    // If too small, underflow to zero
+    if (int(length) + exp < -324)
+        return 0.0;
+
+    if (StrtodDiyFp(decimals, length, decimalPosition, exp, &result))
+        return result;
+
+    // Use approximation from StrtodDiyFp and make adjustment with BigInteger comparison
+    return StrtodBigInteger(result, decimals, length, decimalPosition, exp);
+}
+
+} // namespace internal
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_STRTOD_

libs/rapidjson/memorybuffer.h

@@ -0,0 +1,70 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_MEMORYBUFFER_H_
+#define RAPIDJSON_MEMORYBUFFER_H_
+
+#include "rapidjson.h"
+#include "internal/stack.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Represents an in-memory output byte stream.
+/*!
+    This class is mainly for being wrapped by EncodedOutputStream or AutoUTFOutputStream.
+
+    It is similar to FileWriteBuffer but the destination is an in-memory buffer instead of a file.
+
+    Differences between MemoryBuffer and StringBuffer:
+    1. StringBuffer has Encoding but MemoryBuffer is only a byte buffer. 
+    2. StringBuffer::GetString() returns a null-terminated string. MemoryBuffer::GetBuffer() returns a buffer without terminator.
+
+    \tparam Allocator type for allocating memory buffer.
+    \note implements Stream concept
+*/
+template <typename Allocator = CrtAllocator>
+struct GenericMemoryBuffer {
+    typedef char Ch; // byte
+
+    GenericMemoryBuffer(Allocator* allocator = 0, size_t capacity = kDefaultCapacity) : stack_(allocator, capacity) {}
+
+    void Put(Ch c) { *stack_.template Push<Ch>() = c; }
+    void Flush() {}
+
+    void Clear() { stack_.Clear(); }
+    void ShrinkToFit() { stack_.ShrinkToFit(); }
+    Ch* Push(size_t count) { return stack_.template Push<Ch>(count); }
+    void Pop(size_t count) { stack_.template Pop<Ch>(count); }
+
+    const Ch* GetBuffer() const {
+        return stack_.template Bottom<Ch>();
+    }
+
+    size_t GetSize() const { return stack_.GetSize(); }
+
+    static const size_t kDefaultCapacity = 256;
+    mutable internal::Stack<Allocator> stack_;
+};
+
+typedef GenericMemoryBuffer<> MemoryBuffer;
+
+//! Implement specialized version of PutN() with memset() for better performance.
+template<>
+inline void PutN(MemoryBuffer& memoryBuffer, char c, size_t n) {
+    std::memset(memoryBuffer.stack_.Push<char>(n), c, n * sizeof(c));
+}
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_MEMORYBUFFER_H_

libs/rapidjson/memorystream.h

@@ -0,0 +1,61 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_MEMORYSTREAM_H_
+#define RAPIDJSON_MEMORYSTREAM_H_
+
+#include "rapidjson.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Represents an in-memory input byte stream.
+/*!
+    This class is mainly for being wrapped by EncodedInputStream or AutoUTFInputStream.
+
+    It is similar to FileReadBuffer but the source is an in-memory buffer instead of a file.
+
+    Differences between MemoryStream and StringStream:
+    1. StringStream has encoding but MemoryStream is a byte stream.
+    2. MemoryStream needs size of the source buffer and the buffer don't need to be null terminated. StringStream assume null-terminated string as source.
+    3. MemoryStream supports Peek4() for encoding detection. StringStream is specified with an encoding so it should not have Peek4().
+    \note implements Stream concept
+*/
+struct MemoryStream {
+    typedef char Ch; // byte
+
+    MemoryStream(const Ch *src, size_t size) : src_(src), begin_(src), end_(src + size), size_(size) {}
+
+    Ch Peek() const { return (src_ == end_) ? '\0' : *src_; }
+    Ch Take() { return (src_ == end_) ? '\0' : *src_++; }
+    size_t Tell() const { return static_cast<size_t>(src_ - begin_); }
+
+    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    void Put(Ch) { RAPIDJSON_ASSERT(false); }
+    void Flush() { RAPIDJSON_ASSERT(false); }
+    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
+
+    // For encoding detection only.
+    const Ch* Peek4() const {
+        return Tell() + 4 <= size_ ? src_ : 0;
+    }
+
+    const Ch* src_;     //!< Current read position.
+    const Ch* begin_;   //!< Original head of the string.
+    const Ch* end_;     //!< End of stream.
+    size_t size_;       //!< Size of the stream.
+};
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_MEMORYBUFFER_H_

libs/rapidjson/msinttypes/inttypes.h

@@ -0,0 +1,316 @@
+// ISO C9x  compliant inttypes.h for Microsoft Visual Studio
+// Based on ISO/IEC 9899:TC2 Committee draft (May 6, 2005) WG14/N1124 
+// 
+//  Copyright (c) 2006-2013 Alexander Chemeris
+// 
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+// 
+//   1. Redistributions of source code must retain the above copyright notice,
+//      this list of conditions and the following disclaimer.
+// 
+//   2. Redistributions in binary form must reproduce the above copyright
+//      notice, this list of conditions and the following disclaimer in the
+//      documentation and/or other materials provided with the distribution.
+// 
+//   3. Neither the name of the product nor the names of its contributors may
+//      be used to endorse or promote products derived from this software
+//      without specific prior written permission.
+// 
+// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+// WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+// EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
+// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+// 
+///////////////////////////////////////////////////////////////////////////////
+
+// The above software in this distribution may have been modified by 
+// THL A29 Limited ("Tencent Modifications"). 
+// All Tencent Modifications are Copyright (C) 2015 THL A29 Limited.
+
+#ifndef _MSC_VER // [
+#error "Use this header only with Microsoft Visual C++ compilers!"
+#endif // _MSC_VER ]
+
+#ifndef _MSC_INTTYPES_H_ // [
+#define _MSC_INTTYPES_H_
+
+#if _MSC_VER > 1000
+#pragma once
+#endif
+
+#include "stdint.h"
+
+// miloyip: VC supports inttypes.h since VC2013
+#if _MSC_VER >= 1800
+#include <inttypes.h>
+#else
+
+// 7.8 Format conversion of integer types
+
+typedef struct {
+   intmax_t quot;
+   intmax_t rem;
+} imaxdiv_t;
+
+// 7.8.1 Macros for format specifiers
+
+#if !defined(__cplusplus) || defined(__STDC_FORMAT_MACROS) // [   See footnote 185 at page 198
+
+// The fprintf macros for signed integers are:
+#define PRId8       "d"
+#define PRIi8       "i"
+#define PRIdLEAST8  "d"
+#define PRIiLEAST8  "i"
+#define PRIdFAST8   "d"
+#define PRIiFAST8   "i"
+
+#define PRId16       "hd"
+#define PRIi16       "hi"
+#define PRIdLEAST16  "hd"
+#define PRIiLEAST16  "hi"
+#define PRIdFAST16   "hd"
+#define PRIiFAST16   "hi"
+
+#define PRId32       "I32d"
+#define PRIi32       "I32i"
+#define PRIdLEAST32  "I32d"
+#define PRIiLEAST32  "I32i"
+#define PRIdFAST32   "I32d"
+#define PRIiFAST32   "I32i"
+
+#define PRId64       "I64d"
+#define PRIi64       "I64i"
+#define PRIdLEAST64  "I64d"
+#define PRIiLEAST64  "I64i"
+#define PRIdFAST64   "I64d"
+#define PRIiFAST64   "I64i"
+
+#define PRIdMAX     "I64d"
+#define PRIiMAX     "I64i"
+
+#define PRIdPTR     "Id"
+#define PRIiPTR     "Ii"
+
+// The fprintf macros for unsigned integers are:
+#define PRIo8       "o"
+#define PRIu8       "u"
+#define PRIx8       "x"
+#define PRIX8       "X"
+#define PRIoLEAST8  "o"
+#define PRIuLEAST8  "u"
+#define PRIxLEAST8  "x"
+#define PRIXLEAST8  "X"
+#define PRIoFAST8   "o"
+#define PRIuFAST8   "u"
+#define PRIxFAST8   "x"
+#define PRIXFAST8   "X"
+
+#define PRIo16       "ho"
+#define PRIu16       "hu"
+#define PRIx16       "hx"
+#define PRIX16       "hX"
+#define PRIoLEAST16  "ho"
+#define PRIuLEAST16  "hu"
+#define PRIxLEAST16  "hx"
+#define PRIXLEAST16  "hX"
+#define PRIoFAST16   "ho"
+#define PRIuFAST16   "hu"
+#define PRIxFAST16   "hx"
+#define PRIXFAST16   "hX"
+
+#define PRIo32       "I32o"
+#define PRIu32       "I32u"
+#define PRIx32       "I32x"
+#define PRIX32       "I32X"
+#define PRIoLEAST32  "I32o"
+#define PRIuLEAST32  "I32u"
+#define PRIxLEAST32  "I32x"
+#define PRIXLEAST32  "I32X"
+#define PRIoFAST32   "I32o"
+#define PRIuFAST32   "I32u"
+#define PRIxFAST32   "I32x"
+#define PRIXFAST32   "I32X"
+
+#define PRIo64       "I64o"
+#define PRIu64       "I64u"
+#define PRIx64       "I64x"
+#define PRIX64       "I64X"
+#define PRIoLEAST64  "I64o"
+#define PRIuLEAST64  "I64u"
+#define PRIxLEAST64  "I64x"
+#define PRIXLEAST64  "I64X"
+#define PRIoFAST64   "I64o"
+#define PRIuFAST64   "I64u"
+#define PRIxFAST64   "I64x"
+#define PRIXFAST64   "I64X"
+
+#define PRIoMAX     "I64o"
+#define PRIuMAX     "I64u"
+#define PRIxMAX     "I64x"
+#define PRIXMAX     "I64X"
+
+#define PRIoPTR     "Io"
+#define PRIuPTR     "Iu"
+#define PRIxPTR     "Ix"
+#define PRIXPTR     "IX"
+
+// The fscanf macros for signed integers are:
+#define SCNd8       "d"
+#define SCNi8       "i"
+#define SCNdLEAST8  "d"
+#define SCNiLEAST8  "i"
+#define SCNdFAST8   "d"
+#define SCNiFAST8   "i"
+
+#define SCNd16       "hd"
+#define SCNi16       "hi"
+#define SCNdLEAST16  "hd"
+#define SCNiLEAST16  "hi"
+#define SCNdFAST16   "hd"
+#define SCNiFAST16   "hi"
+
+#define SCNd32       "ld"
+#define SCNi32       "li"
+#define SCNdLEAST32  "ld"
+#define SCNiLEAST32  "li"
+#define SCNdFAST32   "ld"
+#define SCNiFAST32   "li"
+
+#define SCNd64       "I64d"
+#define SCNi64       "I64i"
+#define SCNdLEAST64  "I64d"
+#define SCNiLEAST64  "I64i"
+#define SCNdFAST64   "I64d"
+#define SCNiFAST64   "I64i"
+
+#define SCNdMAX     "I64d"
+#define SCNiMAX     "I64i"
+
+#ifdef _WIN64 // [
+#  define SCNdPTR     "I64d"
+#  define SCNiPTR     "I64i"
+#else  // _WIN64 ][
+#  define SCNdPTR     "ld"
+#  define SCNiPTR     "li"
+#endif  // _WIN64 ]
+
+// The fscanf macros for unsigned integers are:
+#define SCNo8       "o"
+#define SCNu8       "u"
+#define SCNx8       "x"
+#define SCNX8       "X"
+#define SCNoLEAST8  "o"
+#define SCNuLEAST8  "u"
+#define SCNxLEAST8  "x"
+#define SCNXLEAST8  "X"
+#define SCNoFAST8   "o"
+#define SCNuFAST8   "u"
+#define SCNxFAST8   "x"
+#define SCNXFAST8   "X"
+
+#define SCNo16       "ho"
+#define SCNu16       "hu"
+#define SCNx16       "hx"
+#define SCNX16       "hX"
+#define SCNoLEAST16  "ho"
+#define SCNuLEAST16  "hu"
+#define SCNxLEAST16  "hx"
+#define SCNXLEAST16  "hX"
+#define SCNoFAST16   "ho"
+#define SCNuFAST16   "hu"
+#define SCNxFAST16   "hx"
+#define SCNXFAST16   "hX"
+
+#define SCNo32       "lo"
+#define SCNu32       "lu"
+#define SCNx32       "lx"
+#define SCNX32       "lX"
+#define SCNoLEAST32  "lo"
+#define SCNuLEAST32  "lu"
+#define SCNxLEAST32  "lx"
+#define SCNXLEAST32  "lX"
+#define SCNoFAST32   "lo"
+#define SCNuFAST32   "lu"
+#define SCNxFAST32   "lx"
+#define SCNXFAST32   "lX"
+
+#define SCNo64       "I64o"
+#define SCNu64       "I64u"
+#define SCNx64       "I64x"
+#define SCNX64       "I64X"
+#define SCNoLEAST64  "I64o"
+#define SCNuLEAST64  "I64u"
+#define SCNxLEAST64  "I64x"
+#define SCNXLEAST64  "I64X"
+#define SCNoFAST64   "I64o"
+#define SCNuFAST64   "I64u"
+#define SCNxFAST64   "I64x"
+#define SCNXFAST64   "I64X"
+
+#define SCNoMAX     "I64o"
+#define SCNuMAX     "I64u"
+#define SCNxMAX     "I64x"
+#define SCNXMAX     "I64X"
+
+#ifdef _WIN64 // [
+#  define SCNoPTR     "I64o"
+#  define SCNuPTR     "I64u"
+#  define SCNxPTR     "I64x"
+#  define SCNXPTR     "I64X"
+#else  // _WIN64 ][
+#  define SCNoPTR     "lo"
+#  define SCNuPTR     "lu"
+#  define SCNxPTR     "lx"
+#  define SCNXPTR     "lX"
+#endif  // _WIN64 ]
+
+#endif // __STDC_FORMAT_MACROS ]
+
+// 7.8.2 Functions for greatest-width integer types
+
+// 7.8.2.1 The imaxabs function
+#define imaxabs _abs64
+
+// 7.8.2.2 The imaxdiv function
+
+// This is modified version of div() function from Microsoft's div.c found
+// in %MSVC.NET%\crt\src\div.c
+#ifdef STATIC_IMAXDIV // [
+static
+#else // STATIC_IMAXDIV ][
+_inline
+#endif // STATIC_IMAXDIV ]
+imaxdiv_t __cdecl imaxdiv(intmax_t numer, intmax_t denom)
+{
+   imaxdiv_t result;
+
+   result.quot = numer / denom;
+   result.rem = numer % denom;
+
+   if (numer < 0 && result.rem > 0) {
+      // did division wrong; must fix up
+      ++result.quot;
+      result.rem -= denom;
+   }
+
+   return result;
+}
+
+// 7.8.2.3 The strtoimax and strtoumax functions
+#define strtoimax _strtoi64
+#define strtoumax _strtoui64
+
+// 7.8.2.4 The wcstoimax and wcstoumax functions
+#define wcstoimax _wcstoi64
+#define wcstoumax _wcstoui64
+
+#endif // _MSC_VER >= 1800
+
+#endif // _MSC_INTTYPES_H_ ]

libs/rapidjson/msinttypes/stdint.h

@@ -0,0 +1,300 @@
+// ISO C9x  compliant stdint.h for Microsoft Visual Studio
+// Based on ISO/IEC 9899:TC2 Committee draft (May 6, 2005) WG14/N1124 
+// 
+//  Copyright (c) 2006-2013 Alexander Chemeris
+// 
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+// 
+//   1. Redistributions of source code must retain the above copyright notice,
+//      this list of conditions and the following disclaimer.
+// 
+//   2. Redistributions in binary form must reproduce the above copyright
+//      notice, this list of conditions and the following disclaimer in the
+//      documentation and/or other materials provided with the distribution.
+// 
+//   3. Neither the name of the product nor the names of its contributors may
+//      be used to endorse or promote products derived from this software
+//      without specific prior written permission.
+// 
+// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+// WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+// EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
+// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+// 
+///////////////////////////////////////////////////////////////////////////////
+
+// The above software in this distribution may have been modified by 
+// THL A29 Limited ("Tencent Modifications"). 
+// All Tencent Modifications are Copyright (C) 2015 THL A29 Limited.
+
+#ifndef _MSC_VER // [
+#error "Use this header only with Microsoft Visual C++ compilers!"
+#endif // _MSC_VER ]
+
+#ifndef _MSC_STDINT_H_ // [
+#define _MSC_STDINT_H_
+
+#if _MSC_VER > 1000
+#pragma once
+#endif
+
+// miloyip: Originally Visual Studio 2010 uses its own stdint.h. However it generates warning with INT64_C(), so change to use this file for vs2010.
+#if _MSC_VER >= 1600 // [
+#include <stdint.h>
+
+#if !defined(__cplusplus) || defined(__STDC_CONSTANT_MACROS) // [   See footnote 224 at page 260
+
+#undef INT8_C
+#undef INT16_C
+#undef INT32_C
+#undef INT64_C
+#undef UINT8_C
+#undef UINT16_C
+#undef UINT32_C
+#undef UINT64_C
+
+// 7.18.4.1 Macros for minimum-width integer constants
+
+#define INT8_C(val)  val##i8
+#define INT16_C(val) val##i16
+#define INT32_C(val) val##i32
+#define INT64_C(val) val##i64
+
+#define UINT8_C(val)  val##ui8
+#define UINT16_C(val) val##ui16
+#define UINT32_C(val) val##ui32
+#define UINT64_C(val) val##ui64
+
+// 7.18.4.2 Macros for greatest-width integer constants
+// These #ifndef's are needed to prevent collisions with <boost/cstdint.hpp>.
+// Check out Issue 9 for the details.
+#ifndef INTMAX_C //   [
+#  define INTMAX_C   INT64_C
+#endif // INTMAX_C    ]
+#ifndef UINTMAX_C //  [
+#  define UINTMAX_C  UINT64_C
+#endif // UINTMAX_C   ]
+
+#endif // __STDC_CONSTANT_MACROS ]
+
+#else // ] _MSC_VER >= 1700 [
+
+#include <limits.h>
+
+// For Visual Studio 6 in C++ mode and for many Visual Studio versions when
+// compiling for ARM we should wrap <wchar.h> include with 'extern "C++" {}'
+// or compiler give many errors like this:
+//   error C2733: second C linkage of overloaded function 'wmemchr' not allowed
+#ifdef __cplusplus
+extern "C" {
+#endif
+#  include <wchar.h>
+#ifdef __cplusplus
+}
+#endif
+
+// Define _W64 macros to mark types changing their size, like intptr_t.
+#ifndef _W64
+#  if !defined(__midl) && (defined(_X86_) || defined(_M_IX86)) && _MSC_VER >= 1300
+#     define _W64 __w64
+#  else
+#     define _W64
+#  endif
+#endif
+
+
+// 7.18.1 Integer types
+
+// 7.18.1.1 Exact-width integer types
+
+// Visual Studio 6 and Embedded Visual C++ 4 doesn't
+// realize that, e.g. char has the same size as __int8
+// so we give up on __intX for them.
+#if (_MSC_VER < 1300)
+   typedef signed char       int8_t;
+   typedef signed short      int16_t;
+   typedef signed int        int32_t;
+   typedef unsigned char     uint8_t;
+   typedef unsigned short    uint16_t;
+   typedef unsigned int      uint32_t;
+#else
+   typedef signed __int8     int8_t;
+   typedef signed __int16    int16_t;
+   typedef signed __int32    int32_t;
+   typedef unsigned __int8   uint8_t;
+   typedef unsigned __int16  uint16_t;
+   typedef unsigned __int32  uint32_t;
+#endif
+typedef signed __int64       int64_t;
+typedef unsigned __int64     uint64_t;
+
+
+// 7.18.1.2 Minimum-width integer types
+typedef int8_t    int_least8_t;
+typedef int16_t   int_least16_t;
+typedef int32_t   int_least32_t;
+typedef int64_t   int_least64_t;
+typedef uint8_t   uint_least8_t;
+typedef uint16_t  uint_least16_t;
+typedef uint32_t  uint_least32_t;
+typedef uint64_t  uint_least64_t;
+
+// 7.18.1.3 Fastest minimum-width integer types
+typedef int8_t    int_fast8_t;
+typedef int16_t   int_fast16_t;
+typedef int32_t   int_fast32_t;
+typedef int64_t   int_fast64_t;
+typedef uint8_t   uint_fast8_t;
+typedef uint16_t  uint_fast16_t;
+typedef uint32_t  uint_fast32_t;
+typedef uint64_t  uint_fast64_t;
+
+// 7.18.1.4 Integer types capable of holding object pointers
+#ifdef _WIN64 // [
+   typedef signed __int64    intptr_t;
+   typedef unsigned __int64  uintptr_t;
+#else // _WIN64 ][
+   typedef _W64 signed int   intptr_t;
+   typedef _W64 unsigned int uintptr_t;
+#endif // _WIN64 ]
+
+// 7.18.1.5 Greatest-width integer types
+typedef int64_t   intmax_t;
+typedef uint64_t  uintmax_t;
+
+
+// 7.18.2 Limits of specified-width integer types
+
+#if !defined(__cplusplus) || defined(__STDC_LIMIT_MACROS) // [   See footnote 220 at page 257 and footnote 221 at page 259
+
+// 7.18.2.1 Limits of exact-width integer types
+#define INT8_MIN     ((int8_t)_I8_MIN)
+#define INT8_MAX     _I8_MAX
+#define INT16_MIN    ((int16_t)_I16_MIN)
+#define INT16_MAX    _I16_MAX
+#define INT32_MIN    ((int32_t)_I32_MIN)
+#define INT32_MAX    _I32_MAX
+#define INT64_MIN    ((int64_t)_I64_MIN)
+#define INT64_MAX    _I64_MAX
+#define UINT8_MAX    _UI8_MAX
+#define UINT16_MAX   _UI16_MAX
+#define UINT32_MAX   _UI32_MAX
+#define UINT64_MAX   _UI64_MAX
+
+// 7.18.2.2 Limits of minimum-width integer types
+#define INT_LEAST8_MIN    INT8_MIN
+#define INT_LEAST8_MAX    INT8_MAX
+#define INT_LEAST16_MIN   INT16_MIN
+#define INT_LEAST16_MAX   INT16_MAX
+#define INT_LEAST32_MIN   INT32_MIN
+#define INT_LEAST32_MAX   INT32_MAX
+#define INT_LEAST64_MIN   INT64_MIN
+#define INT_LEAST64_MAX   INT64_MAX
+#define UINT_LEAST8_MAX   UINT8_MAX
+#define UINT_LEAST16_MAX  UINT16_MAX
+#define UINT_LEAST32_MAX  UINT32_MAX
+#define UINT_LEAST64_MAX  UINT64_MAX
+
+// 7.18.2.3 Limits of fastest minimum-width integer types
+#define INT_FAST8_MIN    INT8_MIN
+#define INT_FAST8_MAX    INT8_MAX
+#define INT_FAST16_MIN   INT16_MIN
+#define INT_FAST16_MAX   INT16_MAX
+#define INT_FAST32_MIN   INT32_MIN
+#define INT_FAST32_MAX   INT32_MAX
+#define INT_FAST64_MIN   INT64_MIN
+#define INT_FAST64_MAX   INT64_MAX
+#define UINT_FAST8_MAX   UINT8_MAX
+#define UINT_FAST16_MAX  UINT16_MAX
+#define UINT_FAST32_MAX  UINT32_MAX
+#define UINT_FAST64_MAX  UINT64_MAX
+
+// 7.18.2.4 Limits of integer types capable of holding object pointers
+#ifdef _WIN64 // [
+#  define INTPTR_MIN   INT64_MIN
+#  define INTPTR_MAX   INT64_MAX
+#  define UINTPTR_MAX  UINT64_MAX
+#else // _WIN64 ][
+#  define INTPTR_MIN   INT32_MIN
+#  define INTPTR_MAX   INT32_MAX
+#  define UINTPTR_MAX  UINT32_MAX
+#endif // _WIN64 ]
+
+// 7.18.2.5 Limits of greatest-width integer types
+#define INTMAX_MIN   INT64_MIN
+#define INTMAX_MAX   INT64_MAX
+#define UINTMAX_MAX  UINT64_MAX
+
+// 7.18.3 Limits of other integer types
+
+#ifdef _WIN64 // [
+#  define PTRDIFF_MIN  _I64_MIN
+#  define PTRDIFF_MAX  _I64_MAX
+#else  // _WIN64 ][
+#  define PTRDIFF_MIN  _I32_MIN
+#  define PTRDIFF_MAX  _I32_MAX
+#endif  // _WIN64 ]
+
+#define SIG_ATOMIC_MIN  INT_MIN
+#define SIG_ATOMIC_MAX  INT_MAX
+
+#ifndef SIZE_MAX // [
+#  ifdef _WIN64 // [
+#     define SIZE_MAX  _UI64_MAX
+#  else // _WIN64 ][
+#     define SIZE_MAX  _UI32_MAX
+#  endif // _WIN64 ]
+#endif // SIZE_MAX ]
+
+// WCHAR_MIN and WCHAR_MAX are also defined in <wchar.h>
+#ifndef WCHAR_MIN // [
+#  define WCHAR_MIN  0
+#endif  // WCHAR_MIN ]
+#ifndef WCHAR_MAX // [
+#  define WCHAR_MAX  _UI16_MAX
+#endif  // WCHAR_MAX ]
+
+#define WINT_MIN  0
+#define WINT_MAX  _UI16_MAX
+
+#endif // __STDC_LIMIT_MACROS ]
+
+
+// 7.18.4 Limits of other integer types
+
+#if !defined(__cplusplus) || defined(__STDC_CONSTANT_MACROS) // [   See footnote 224 at page 260
+
+// 7.18.4.1 Macros for minimum-width integer constants
+
+#define INT8_C(val)  val##i8
+#define INT16_C(val) val##i16
+#define INT32_C(val) val##i32
+#define INT64_C(val) val##i64
+
+#define UINT8_C(val)  val##ui8
+#define UINT16_C(val) val##ui16
+#define UINT32_C(val) val##ui32
+#define UINT64_C(val) val##ui64
+
+// 7.18.4.2 Macros for greatest-width integer constants
+// These #ifndef's are needed to prevent collisions with <boost/cstdint.hpp>.
+// Check out Issue 9 for the details.
+#ifndef INTMAX_C //   [
+#  define INTMAX_C   INT64_C
+#endif // INTMAX_C    ]
+#ifndef UINTMAX_C //  [
+#  define UINTMAX_C  UINT64_C
+#endif // UINTMAX_C   ]
+
+#endif // __STDC_CONSTANT_MACROS ]
+
+#endif // _MSC_VER >= 1600 ]
+
+#endif // _MSC_STDINT_H_ ]

libs/rapidjson/prettywriter.h

@@ -0,0 +1,207 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_PRETTYWRITER_H_
+#define RAPIDJSON_PRETTYWRITER_H_
+
+#include "writer.h"
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(effc++)
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Writer with indentation and spacing.
+/*!
+    \tparam OutputStream Type of ouptut os.
+    \tparam SourceEncoding Encoding of source string.
+    \tparam TargetEncoding Encoding of output stream.
+    \tparam StackAllocator Type of allocator for allocating memory of stack.
+*/
+template<typename OutputStream, typename SourceEncoding = UTF8<>, typename TargetEncoding = UTF8<>, typename StackAllocator = CrtAllocator>
+class PrettyWriter : public Writer<OutputStream, SourceEncoding, TargetEncoding, StackAllocator> {
+public:
+    typedef Writer<OutputStream, SourceEncoding, TargetEncoding, StackAllocator> Base;
+    typedef typename Base::Ch Ch;
+
+    //! Constructor
+    /*! \param os Output stream.
+        \param allocator User supplied allocator. If it is null, it will create a private one.
+        \param levelDepth Initial capacity of stack.
+    */
+    PrettyWriter(OutputStream& os, StackAllocator* allocator = 0, size_t levelDepth = Base::kDefaultLevelDepth) : 
+        Base(os, allocator, levelDepth), indentChar_(' '), indentCharCount_(4) {}
+
+    //! Set custom indentation.
+    /*! \param indentChar       Character for indentation. Must be whitespace character (' ', '\\t', '\\n', '\\r').
+        \param indentCharCount  Number of indent characters for each indentation level.
+        \note The default indentation is 4 spaces.
+    */
+    PrettyWriter& SetIndent(Ch indentChar, unsigned indentCharCount) {
+        RAPIDJSON_ASSERT(indentChar == ' ' || indentChar == '\t' || indentChar == '\n' || indentChar == '\r');
+        indentChar_ = indentChar;
+        indentCharCount_ = indentCharCount;
+        return *this;
+    }
+
+    /*! @name Implementation of Handler
+        \see Handler
+    */
+    //@{
+
+    bool Null()                 { PrettyPrefix(kNullType);   return Base::WriteNull(); }
+    bool Bool(bool b)           { PrettyPrefix(b ? kTrueType : kFalseType); return Base::WriteBool(b); }
+    bool Int(int i)             { PrettyPrefix(kNumberType); return Base::WriteInt(i); }
+    bool Uint(unsigned u)       { PrettyPrefix(kNumberType); return Base::WriteUint(u); }
+    bool Int64(int64_t i64)     { PrettyPrefix(kNumberType); return Base::WriteInt64(i64); }
+    bool Uint64(uint64_t u64)   { PrettyPrefix(kNumberType); return Base::WriteUint64(u64);  }
+    bool Double(double d)       { PrettyPrefix(kNumberType); return Base::WriteDouble(d); }
+
+    bool String(const Ch* str, SizeType length, bool copy = false) {
+        (void)copy;
+        PrettyPrefix(kStringType);
+        return Base::WriteString(str, length);
+    }
+
+#if RAPIDJSON_HAS_STDSTRING
+    bool String(const std::basic_string<Ch>& str) {
+        return String(str.data(), SizeType(str.size()));
+    }
+#endif
+
+    bool StartObject() {
+        PrettyPrefix(kObjectType);
+        new (Base::level_stack_.template Push<typename Base::Level>()) typename Base::Level(false);
+        return Base::WriteStartObject();
+    }
+
+    bool Key(const Ch* str, SizeType length, bool copy = false) { return String(str, length, copy); }
+	
+    bool EndObject(SizeType memberCount = 0) {
+        (void)memberCount;
+        RAPIDJSON_ASSERT(Base::level_stack_.GetSize() >= sizeof(typename Base::Level));
+        RAPIDJSON_ASSERT(!Base::level_stack_.template Top<typename Base::Level>()->inArray);
+        bool empty = Base::level_stack_.template Pop<typename Base::Level>(1)->valueCount == 0;
+
+        if (!empty) {
+            Base::os_->Put('\n');
+            WriteIndent();
+        }
+        bool ret = Base::WriteEndObject();
+        (void)ret;
+        RAPIDJSON_ASSERT(ret == true);
+        if (Base::level_stack_.Empty()) // end of json text
+            Base::os_->Flush();
+        return true;
+    }
+
+    bool StartArray() {
+        PrettyPrefix(kArrayType);
+        new (Base::level_stack_.template Push<typename Base::Level>()) typename Base::Level(true);
+        return Base::WriteStartArray();
+    }
+
+    bool EndArray(SizeType memberCount = 0) {
+        (void)memberCount;
+        RAPIDJSON_ASSERT(Base::level_stack_.GetSize() >= sizeof(typename Base::Level));
+        RAPIDJSON_ASSERT(Base::level_stack_.template Top<typename Base::Level>()->inArray);
+        bool empty = Base::level_stack_.template Pop<typename Base::Level>(1)->valueCount == 0;
+
+        if (!empty) {
+            Base::os_->Put('\n');
+            WriteIndent();
+        }
+        bool ret = Base::WriteEndArray();
+        (void)ret;
+        RAPIDJSON_ASSERT(ret == true);
+        if (Base::level_stack_.Empty()) // end of json text
+            Base::os_->Flush();
+        return true;
+    }
+
+    //@}
+
+    /*! @name Convenience extensions */
+    //@{
+
+    //! Simpler but slower overload.
+    bool String(const Ch* str) { return String(str, internal::StrLen(str)); }
+    bool Key(const Ch* str) { return Key(str, internal::StrLen(str)); }
+
+    //@}
+protected:
+    void PrettyPrefix(Type type) {
+        (void)type;
+        if (Base::level_stack_.GetSize() != 0) { // this value is not at root
+            typename Base::Level* level = Base::level_stack_.template Top<typename Base::Level>();
+
+            if (level->inArray) {
+                if (level->valueCount > 0) {
+                    Base::os_->Put(','); // add comma if it is not the first element in array
+                    Base::os_->Put('\n');
+                }
+                else
+                    Base::os_->Put('\n');
+                WriteIndent();
+            }
+            else {  // in object
+                if (level->valueCount > 0) {
+                    if (level->valueCount % 2 == 0) {
+                        Base::os_->Put(',');
+                        Base::os_->Put('\n');
+                    }
+                    else {
+                        Base::os_->Put(':');
+                        Base::os_->Put(' ');
+                    }
+                }
+                else
+                    Base::os_->Put('\n');
+
+                if (level->valueCount % 2 == 0)
+                    WriteIndent();
+            }
+            if (!level->inArray && level->valueCount % 2 == 0)
+                RAPIDJSON_ASSERT(type == kStringType);  // if it's in object, then even number should be a name
+            level->valueCount++;
+        }
+        else {
+            RAPIDJSON_ASSERT(!Base::hasRoot_);  // Should only has one and only one root.
+            Base::hasRoot_ = true;
+        }
+    }
+
+    void WriteIndent()  {
+        size_t count = (Base::level_stack_.GetSize() / sizeof(typename Base::Level)) * indentCharCount_;
+        PutN(*Base::os_, indentChar_, count);
+    }
+
+    Ch indentChar_;
+    unsigned indentCharCount_;
+
+private:
+    // Prohibit copy constructor & assignment operator.
+    PrettyWriter(const PrettyWriter&);
+    PrettyWriter& operator=(const PrettyWriter&);
+};
+
+RAPIDJSON_NAMESPACE_END
+
+#ifdef __GNUC__
+RAPIDJSON_DIAG_POP
+#endif
+
+#endif // RAPIDJSON_RAPIDJSON_H_

libs/rapidjson/rapidjson.h

@@ -0,0 +1,620 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_RAPIDJSON_H_
+#define RAPIDJSON_RAPIDJSON_H_
+
+/*!\file rapidjson.h
+    \brief common definitions and configuration
+
+    \see RAPIDJSON_CONFIG
+ */
+
+/*! \defgroup RAPIDJSON_CONFIG RapidJSON configuration
+    \brief Configuration macros for library features
+
+    Some RapidJSON features are configurable to adapt the library to a wide
+    variety of platforms, environments and usage scenarios.  Most of the
+    features can be configured in terms of overriden or predefined
+    preprocessor macros at compile-time.
+
+    Some additional customization is available in the \ref RAPIDJSON_ERRORS APIs.
+
+    \note These macros should be given on the compiler command-line
+          (where applicable)  to avoid inconsistent values when compiling
+          different translation units of a single application.
+ */
+
+#include <cstdlib>  // malloc(), realloc(), free(), size_t
+#include <cstring>  // memset(), memcpy(), memmove(), memcmp()
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_NAMESPACE_(BEGIN|END)
+/*! \def RAPIDJSON_NAMESPACE
+    \ingroup RAPIDJSON_CONFIG
+    \brief   provide custom rapidjson namespace
+
+    In order to avoid symbol clashes and/or "One Definition Rule" errors
+    between multiple inclusions of (different versions of) RapidJSON in
+    a single binary, users can customize the name of the main RapidJSON
+    namespace.
+
+    In case of a single nesting level, defining \c RAPIDJSON_NAMESPACE
+    to a custom name (e.g. \c MyRapidJSON) is sufficient.  If multiple
+    levels are needed, both \ref RAPIDJSON_NAMESPACE_BEGIN and \ref
+    RAPIDJSON_NAMESPACE_END need to be defined as well:
+
+    \code
+    // in some .cpp file
+    #define RAPIDJSON_NAMESPACE my::rapidjson
+    #define RAPIDJSON_NAMESPACE_BEGIN namespace my { namespace rapidjson {
+    #define RAPIDJSON_NAMESPACE_END   } }
+    #include "rapidjson/..."
+    \endcode
+
+    \see rapidjson
+ */
+/*! \def RAPIDJSON_NAMESPACE_BEGIN
+    \ingroup RAPIDJSON_CONFIG
+    \brief   provide custom rapidjson namespace (opening expression)
+    \see RAPIDJSON_NAMESPACE
+*/
+/*! \def RAPIDJSON_NAMESPACE_END
+    \ingroup RAPIDJSON_CONFIG
+    \brief   provide custom rapidjson namespace (closing expression)
+    \see RAPIDJSON_NAMESPACE
+*/
+#ifndef RAPIDJSON_NAMESPACE
+#define RAPIDJSON_NAMESPACE rapidjson
+#endif
+#ifndef RAPIDJSON_NAMESPACE_BEGIN
+#define RAPIDJSON_NAMESPACE_BEGIN namespace RAPIDJSON_NAMESPACE {
+#endif
+#ifndef RAPIDJSON_NAMESPACE_END
+#define RAPIDJSON_NAMESPACE_END }
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_NO_INT64DEFINE
+
+/*! \def RAPIDJSON_NO_INT64DEFINE
+    \ingroup RAPIDJSON_CONFIG
+    \brief Use external 64-bit integer types.
+
+    RapidJSON requires the 64-bit integer types \c int64_t and  \c uint64_t types
+    to be available at global scope.
+
+    If users have their own definition, define RAPIDJSON_NO_INT64DEFINE to
+    prevent RapidJSON from defining its own types.
+*/
+#ifndef RAPIDJSON_NO_INT64DEFINE
+//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
+#ifdef _MSC_VER
+#include "msinttypes/stdint.h"
+#include "msinttypes/inttypes.h"
+#else
+// Other compilers should have this.
+#include <stdint.h>
+#include <inttypes.h>
+#endif
+//!@endcond
+#ifdef RAPIDJSON_DOXYGEN_RUNNING
+#define RAPIDJSON_NO_INT64DEFINE
+#endif
+#endif // RAPIDJSON_NO_INT64TYPEDEF
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_FORCEINLINE
+
+#ifndef RAPIDJSON_FORCEINLINE
+//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
+#if defined(_MSC_VER) && !defined(NDEBUG)
+#define RAPIDJSON_FORCEINLINE __forceinline
+#elif defined(__GNUC__) && __GNUC__ >= 4 && !defined(NDEBUG)
+#define RAPIDJSON_FORCEINLINE __attribute__((always_inline))
+#else
+#define RAPIDJSON_FORCEINLINE
+#endif
+//!@endcond
+#endif // RAPIDJSON_FORCEINLINE
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_ENDIAN
+#define RAPIDJSON_LITTLEENDIAN  0   //!< Little endian machine
+#define RAPIDJSON_BIGENDIAN     1   //!< Big endian machine
+
+//! Endianness of the machine.
+/*!
+    \def RAPIDJSON_ENDIAN
+    \ingroup RAPIDJSON_CONFIG
+
+    GCC 4.6 provided macro for detecting endianness of the target machine. But other
+    compilers may not have this. User can define RAPIDJSON_ENDIAN to either
+    \ref RAPIDJSON_LITTLEENDIAN or \ref RAPIDJSON_BIGENDIAN.
+
+    Default detection implemented with reference to
+    \li https://gcc.gnu.org/onlinedocs/gcc-4.6.0/cpp/Common-Predefined-Macros.html
+    \li http://www.boost.org/doc/libs/1_42_0/boost/detail/endian.hpp
+*/
+#ifndef RAPIDJSON_ENDIAN
+// Detect with GCC 4.6's macro
+#  ifdef __BYTE_ORDER__
+#    if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#      define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
+#    elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#      define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
+#    else
+#      error Unknown machine endianess detected. User needs to define RAPIDJSON_ENDIAN.
+#    endif // __BYTE_ORDER__
+// Detect with GLIBC's endian.h
+#  elif defined(__GLIBC__)
+#    include <endian.h>
+#    if (__BYTE_ORDER == __LITTLE_ENDIAN)
+#      define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
+#    elif (__BYTE_ORDER == __BIG_ENDIAN)
+#      define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
+#    else
+#      error Unknown machine endianess detected. User needs to define RAPIDJSON_ENDIAN.
+#   endif // __GLIBC__
+// Detect with _LITTLE_ENDIAN and _BIG_ENDIAN macro
+#  elif defined(_LITTLE_ENDIAN) && !defined(_BIG_ENDIAN)
+#    define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
+#  elif defined(_BIG_ENDIAN) && !defined(_LITTLE_ENDIAN)
+#    define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
+// Detect with architecture macros
+#  elif defined(__sparc) || defined(__sparc__) || defined(_POWER) || defined(__powerpc__) || defined(__ppc__) || defined(__hpux) || defined(__hppa) || defined(_MIPSEB) || defined(_POWER) || defined(__s390__)
+#    define RAPIDJSON_ENDIAN RAPIDJSON_BIGENDIAN
+#  elif defined(__i386__) || defined(__alpha__) || defined(__ia64) || defined(__ia64__) || defined(_M_IX86) || defined(_M_IA64) || defined(_M_ALPHA) || defined(__amd64) || defined(__amd64__) || defined(_M_AMD64) || defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || defined(__bfin__)
+#    define RAPIDJSON_ENDIAN RAPIDJSON_LITTLEENDIAN
+#  elif defined(RAPIDJSON_DOXYGEN_RUNNING)
+#    define RAPIDJSON_ENDIAN
+#  else
+#    error Unknown machine endianess detected. User needs to define RAPIDJSON_ENDIAN.   
+#  endif
+#endif // RAPIDJSON_ENDIAN
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_64BIT
+
+//! Whether using 64-bit architecture
+#ifndef RAPIDJSON_64BIT
+#if defined(__LP64__) || defined(_WIN64)
+#define RAPIDJSON_64BIT 1
+#else
+#define RAPIDJSON_64BIT 0
+#endif
+#endif // RAPIDJSON_64BIT
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_ALIGN
+
+//! Data alignment of the machine.
+/*! \ingroup RAPIDJSON_CONFIG
+    \param x pointer to align
+
+    Some machines require strict data alignment. Currently the default uses 4 bytes
+    alignment. User can customize by defining the RAPIDJSON_ALIGN function macro.,
+*/
+#ifndef RAPIDJSON_ALIGN
+#define RAPIDJSON_ALIGN(x) ((x + 3u) & ~3u)
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_UINT64_C2
+
+//! Construct a 64-bit literal by a pair of 32-bit integer.
+/*!
+    64-bit literal with or without ULL suffix is prone to compiler warnings.
+    UINT64_C() is C macro which cause compilation problems.
+    Use this macro to define 64-bit constants by a pair of 32-bit integer.
+*/
+#ifndef RAPIDJSON_UINT64_C2
+#define RAPIDJSON_UINT64_C2(high32, low32) ((static_cast<uint64_t>(high32) << 32) | static_cast<uint64_t>(low32))
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_SSE2/RAPIDJSON_SSE42/RAPIDJSON_SIMD
+
+/*! \def RAPIDJSON_SIMD
+    \ingroup RAPIDJSON_CONFIG
+    \brief Enable SSE2/SSE4.2 optimization.
+
+    RapidJSON supports optimized implementations for some parsing operations
+    based on the SSE2 or SSE4.2 SIMD extensions on modern Intel-compatible
+    processors.
+
+    To enable these optimizations, two different symbols can be defined;
+    \code
+    // Enable SSE2 optimization.
+    #define RAPIDJSON_SSE2
+
+    // Enable SSE4.2 optimization.
+    #define RAPIDJSON_SSE42
+    \endcode
+
+    \c RAPIDJSON_SSE42 takes precedence, if both are defined.
+
+    If any of these symbols is defined, RapidJSON defines the macro
+    \c RAPIDJSON_SIMD to indicate the availability of the optimized code.
+*/
+#if defined(RAPIDJSON_SSE2) || defined(RAPIDJSON_SSE42) \
+    || defined(RAPIDJSON_DOXYGEN_RUNNING)
+#define RAPIDJSON_SIMD
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_NO_SIZETYPEDEFINE
+
+#ifndef RAPIDJSON_NO_SIZETYPEDEFINE
+/*! \def RAPIDJSON_NO_SIZETYPEDEFINE
+    \ingroup RAPIDJSON_CONFIG
+    \brief User-provided \c SizeType definition.
+
+    In order to avoid using 32-bit size types for indexing strings and arrays,
+    define this preprocessor symbol and provide the type rapidjson::SizeType
+    before including RapidJSON:
+    \code
+    #define RAPIDJSON_NO_SIZETYPEDEFINE
+    namespace rapidjson { typedef ::std::size_t SizeType; }
+    #include "rapidjson/..."
+    \endcode
+
+    \see rapidjson::SizeType
+*/
+#ifdef RAPIDJSON_DOXYGEN_RUNNING
+#define RAPIDJSON_NO_SIZETYPEDEFINE
+#endif
+RAPIDJSON_NAMESPACE_BEGIN
+//! Size type (for string lengths, array sizes, etc.)
+/*! RapidJSON uses 32-bit array/string indices even on 64-bit platforms,
+    instead of using \c size_t. Users may override the SizeType by defining
+    \ref RAPIDJSON_NO_SIZETYPEDEFINE.
+*/
+typedef unsigned SizeType;
+RAPIDJSON_NAMESPACE_END
+#endif
+
+// always import std::size_t to rapidjson namespace
+RAPIDJSON_NAMESPACE_BEGIN
+using std::size_t;
+RAPIDJSON_NAMESPACE_END
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_ASSERT
+
+//! Assertion.
+/*! \ingroup RAPIDJSON_CONFIG
+    By default, rapidjson uses C \c assert() for internal assertions.
+    User can override it by defining RAPIDJSON_ASSERT(x) macro.
+
+    \note Parsing errors are handled and can be customized by the
+          \ref RAPIDJSON_ERRORS APIs.
+*/
+#ifndef RAPIDJSON_ASSERT
+#include <cassert>
+#define RAPIDJSON_ASSERT(x) assert(x)
+#endif // RAPIDJSON_ASSERT
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_STATIC_ASSERT
+
+// Adopt from boost
+#ifndef RAPIDJSON_STATIC_ASSERT
+//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
+RAPIDJSON_NAMESPACE_BEGIN
+template <bool x> struct STATIC_ASSERTION_FAILURE;
+template <> struct STATIC_ASSERTION_FAILURE<true> { enum { value = 1 }; };
+template<int x> struct StaticAssertTest {};
+RAPIDJSON_NAMESPACE_END
+
+#define RAPIDJSON_JOIN(X, Y) RAPIDJSON_DO_JOIN(X, Y)
+#define RAPIDJSON_DO_JOIN(X, Y) RAPIDJSON_DO_JOIN2(X, Y)
+#define RAPIDJSON_DO_JOIN2(X, Y) X##Y
+
+#if defined(__GNUC__)
+#define RAPIDJSON_STATIC_ASSERT_UNUSED_ATTRIBUTE __attribute__((unused))
+#else
+#define RAPIDJSON_STATIC_ASSERT_UNUSED_ATTRIBUTE 
+#endif
+//!@endcond
+
+/*! \def RAPIDJSON_STATIC_ASSERT
+    \brief (Internal) macro to check for conditions at compile-time
+    \param x compile-time condition
+    \hideinitializer
+ */
+#define RAPIDJSON_STATIC_ASSERT(x) \
+    typedef ::RAPIDJSON_NAMESPACE::StaticAssertTest< \
+      sizeof(::RAPIDJSON_NAMESPACE::STATIC_ASSERTION_FAILURE<bool(x) >)> \
+    RAPIDJSON_JOIN(StaticAssertTypedef, __LINE__) RAPIDJSON_STATIC_ASSERT_UNUSED_ATTRIBUTE
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+// Helpers
+
+//!@cond RAPIDJSON_HIDDEN_FROM_DOXYGEN
+
+#define RAPIDJSON_MULTILINEMACRO_BEGIN do {  
+#define RAPIDJSON_MULTILINEMACRO_END \
+} while((void)0, 0)
+
+// adopted from Boost
+#define RAPIDJSON_VERSION_CODE(x,y,z) \
+  (((x)*100000) + ((y)*100) + (z))
+
+// token stringification
+#define RAPIDJSON_STRINGIFY(x) RAPIDJSON_DO_STRINGIFY(x)
+#define RAPIDJSON_DO_STRINGIFY(x) #x
+
+///////////////////////////////////////////////////////////////////////////////
+// RAPIDJSON_DIAG_PUSH/POP, RAPIDJSON_DIAG_OFF
+
+#if defined(__GNUC__)
+#define RAPIDJSON_GNUC \
+    RAPIDJSON_VERSION_CODE(__GNUC__,__GNUC_MINOR__,__GNUC_PATCHLEVEL__)
+#endif
+
+#if defined(__clang__) || (defined(RAPIDJSON_GNUC) && RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,2,0))
+
+#define RAPIDJSON_PRAGMA(x) _Pragma(RAPIDJSON_STRINGIFY(x))
+#define RAPIDJSON_DIAG_PRAGMA(x) RAPIDJSON_PRAGMA(GCC diagnostic x)
+#define RAPIDJSON_DIAG_OFF(x) \
+    RAPIDJSON_DIAG_PRAGMA(ignored RAPIDJSON_STRINGIFY(RAPIDJSON_JOIN(-W,x)))
+
+// push/pop support in Clang and GCC>=4.6
+#if defined(__clang__) || (defined(RAPIDJSON_GNUC) && RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,6,0))
+#define RAPIDJSON_DIAG_PUSH RAPIDJSON_DIAG_PRAGMA(push)
+#define RAPIDJSON_DIAG_POP  RAPIDJSON_DIAG_PRAGMA(pop)
+#else // GCC >= 4.2, < 4.6
+#define RAPIDJSON_DIAG_PUSH /* ignored */
+#define RAPIDJSON_DIAG_POP /* ignored */
+#endif
+
+#elif defined(_MSC_VER)
+
+// pragma (MSVC specific)
+#define RAPIDJSON_PRAGMA(x) __pragma(x)
+#define RAPIDJSON_DIAG_PRAGMA(x) RAPIDJSON_PRAGMA(warning(x))
+
+#define RAPIDJSON_DIAG_OFF(x) RAPIDJSON_DIAG_PRAGMA(disable: x)
+#define RAPIDJSON_DIAG_PUSH RAPIDJSON_DIAG_PRAGMA(push)
+#define RAPIDJSON_DIAG_POP  RAPIDJSON_DIAG_PRAGMA(pop)
+
+#else
+
+#define RAPIDJSON_DIAG_OFF(x) /* ignored */
+#define RAPIDJSON_DIAG_PUSH   /* ignored */
+#define RAPIDJSON_DIAG_POP    /* ignored */
+
+#endif // RAPIDJSON_DIAG_*
+
+///////////////////////////////////////////////////////////////////////////////
+// C++11 features
+
+#ifndef RAPIDJSON_HAS_CXX11_RVALUE_REFS
+#if defined(__clang__)
+#define RAPIDJSON_HAS_CXX11_RVALUE_REFS __has_feature(cxx_rvalue_references) && \
+    (defined(_LIBCPP_VERSION) || defined(__GLIBCXX__) && __GLIBCXX__ >= 20080306)
+#elif (defined(RAPIDJSON_GNUC) && (RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,3,0)) && defined(__GXX_EXPERIMENTAL_CXX0X__)) || \
+      (defined(_MSC_VER) && _MSC_VER >= 1600)
+
+#define RAPIDJSON_HAS_CXX11_RVALUE_REFS 1
+#else
+#define RAPIDJSON_HAS_CXX11_RVALUE_REFS 0
+#endif
+#endif // RAPIDJSON_HAS_CXX11_RVALUE_REFS
+
+#ifndef RAPIDJSON_HAS_CXX11_NOEXCEPT
+#if defined(__clang__)
+#define RAPIDJSON_HAS_CXX11_NOEXCEPT __has_feature(cxx_noexcept)
+#elif (defined(RAPIDJSON_GNUC) && (RAPIDJSON_GNUC >= RAPIDJSON_VERSION_CODE(4,6,0)) && defined(__GXX_EXPERIMENTAL_CXX0X__))
+//    (defined(_MSC_VER) && _MSC_VER >= ????) // not yet supported
+#define RAPIDJSON_HAS_CXX11_NOEXCEPT 1
+#else
+#define RAPIDJSON_HAS_CXX11_NOEXCEPT 0
+#endif
+#endif
+#if RAPIDJSON_HAS_CXX11_NOEXCEPT
+#define RAPIDJSON_NOEXCEPT noexcept
+#else
+#define RAPIDJSON_NOEXCEPT /* noexcept */
+#endif // RAPIDJSON_HAS_CXX11_NOEXCEPT
+
+// no automatic detection, yet
+#ifndef RAPIDJSON_HAS_CXX11_TYPETRAITS
+#define RAPIDJSON_HAS_CXX11_TYPETRAITS 0
+#endif
+
+//!@endcond
+
+///////////////////////////////////////////////////////////////////////////////
+// new/delete
+
+#ifndef RAPIDJSON_NEW
+///! customization point for global \c new
+#define RAPIDJSON_NEW(x) new x
+#endif
+#ifndef RAPIDJSON_DELETE
+///! customization point for global \c delete
+#define RAPIDJSON_DELETE(x) delete x
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+// Allocators and Encodings
+
+#include "allocators.h"
+#include "encodings.h"
+
+/*! \namespace rapidjson
+    \brief main RapidJSON namespace
+    \see RAPIDJSON_NAMESPACE
+*/
+RAPIDJSON_NAMESPACE_BEGIN
+
+///////////////////////////////////////////////////////////////////////////////
+//  Stream
+
+/*! \class rapidjson::Stream
+    \brief Concept for reading and writing characters.
+
+    For read-only stream, no need to implement PutBegin(), Put(), Flush() and PutEnd().
+
+    For write-only stream, only need to implement Put() and Flush().
+
+\code
+concept Stream {
+    typename Ch;    //!< Character type of the stream.
+
+    //! Read the current character from stream without moving the read cursor.
+    Ch Peek() const;
+
+    //! Read the current character from stream and moving the read cursor to next character.
+    Ch Take();
+
+    //! Get the current read cursor.
+    //! \return Number of characters read from start.
+    size_t Tell();
+
+    //! Begin writing operation at the current read pointer.
+    //! \return The begin writer pointer.
+    Ch* PutBegin();
+
+    //! Write a character.
+    void Put(Ch c);
+
+    //! Flush the buffer.
+    void Flush();
+
+    //! End the writing operation.
+    //! \param begin The begin write pointer returned by PutBegin().
+    //! \return Number of characters written.
+    size_t PutEnd(Ch* begin);
+}
+\endcode
+*/
+
+//! Provides additional information for stream.
+/*!
+    By using traits pattern, this type provides a default configuration for stream.
+    For custom stream, this type can be specialized for other configuration.
+    See TEST(Reader, CustomStringStream) in readertest.cpp for example.
+*/
+template<typename Stream>
+struct StreamTraits {
+    //! Whether to make local copy of stream for optimization during parsing.
+    /*!
+        By default, for safety, streams do not use local copy optimization.
+        Stream that can be copied fast should specialize this, like StreamTraits<StringStream>.
+    */
+    enum { copyOptimization = 0 };
+};
+
+//! Put N copies of a character to a stream.
+template<typename Stream, typename Ch>
+inline void PutN(Stream& stream, Ch c, size_t n) {
+    for (size_t i = 0; i < n; i++)
+        stream.Put(c);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// StringStream
+
+//! Read-only string stream.
+/*! \note implements Stream concept
+*/
+template <typename Encoding>
+struct GenericStringStream {
+    typedef typename Encoding::Ch Ch;
+
+    GenericStringStream(const Ch *src) : src_(src), head_(src) {}
+
+    Ch Peek() const { return *src_; }
+    Ch Take() { return *src_++; }
+    size_t Tell() const { return static_cast<size_t>(src_ - head_); }
+
+    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
+    void Put(Ch) { RAPIDJSON_ASSERT(false); }
+    void Flush() { RAPIDJSON_ASSERT(false); }
+    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
+
+    const Ch* src_;     //!< Current read position.
+    const Ch* head_;    //!< Original head of the string.
+};
+
+template <typename Encoding>
+struct StreamTraits<GenericStringStream<Encoding> > {
+    enum { copyOptimization = 1 };
+};
+
+//! String stream with UTF8 encoding.
+typedef GenericStringStream<UTF8<> > StringStream;
+
+///////////////////////////////////////////////////////////////////////////////
+// InsituStringStream
+
+//! A read-write string stream.
+/*! This string stream is particularly designed for in-situ parsing.
+    \note implements Stream concept
+*/
+template <typename Encoding>
+struct GenericInsituStringStream {
+    typedef typename Encoding::Ch Ch;
+
+    GenericInsituStringStream(Ch *src) : src_(src), dst_(0), head_(src) {}
+
+    // Read
+    Ch Peek() { return *src_; }
+    Ch Take() { return *src_++; }
+    size_t Tell() { return static_cast<size_t>(src_ - head_); }
+
+    // Write
+    void Put(Ch c) { RAPIDJSON_ASSERT(dst_ != 0); *dst_++ = c; }
+
+    Ch* PutBegin() { return dst_ = src_; }
+    size_t PutEnd(Ch* begin) { return static_cast<size_t>(dst_ - begin); }
+    void Flush() {}
+
+    Ch* Push(size_t count) { Ch* begin = dst_; dst_ += count; return begin; }
+    void Pop(size_t count) { dst_ -= count; }
+
+    Ch* src_;
+    Ch* dst_;
+    Ch* head_;
+};
+
+template <typename Encoding>
+struct StreamTraits<GenericInsituStringStream<Encoding> > {
+    enum { copyOptimization = 1 };
+};
+
+//! Insitu string stream with UTF8 encoding.
+typedef GenericInsituStringStream<UTF8<> > InsituStringStream;
+
+///////////////////////////////////////////////////////////////////////////////
+// Type
+
+//! Type of JSON value
+enum Type {
+    kNullType = 0,      //!< null
+    kFalseType = 1,     //!< false
+    kTrueType = 2,      //!< true
+    kObjectType = 3,    //!< object
+    kArrayType = 4,     //!< array 
+    kStringType = 5,    //!< string
+    kNumberType = 6     //!< number
+};
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_RAPIDJSON_H_

libs/rapidjson/stringbuffer.h

@@ -0,0 +1,93 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_STRINGBUFFER_H_
+#define RAPIDJSON_STRINGBUFFER_H_
+
+#include "rapidjson.h"
+
+#if RAPIDJSON_HAS_CXX11_RVALUE_REFS
+#include <utility> // std::move
+#endif
+
+#include "internal/stack.h"
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Represents an in-memory output stream.
+/*!
+    \tparam Encoding Encoding of the stream.
+    \tparam Allocator type for allocating memory buffer.
+    \note implements Stream concept
+*/
+template <typename Encoding, typename Allocator = CrtAllocator>
+class GenericStringBuffer {
+public:
+    typedef typename Encoding::Ch Ch;
+
+    GenericStringBuffer(Allocator* allocator = 0, size_t capacity = kDefaultCapacity) : stack_(allocator, capacity) {}
+
+#if RAPIDJSON_HAS_CXX11_RVALUE_REFS
+    GenericStringBuffer(GenericStringBuffer&& rhs) : stack_(std::move(rhs.stack_)) {}
+    GenericStringBuffer& operator=(GenericStringBuffer&& rhs) {
+        if (&rhs != this)
+            stack_ = std::move(rhs.stack_);
+        return *this;
+    }
+#endif
+
+    void Put(Ch c) { *stack_.template Push<Ch>() = c; }
+    void Flush() {}
+
+    void Clear() { stack_.Clear(); }
+    void ShrinkToFit() {
+        // Push and pop a null terminator. This is safe.
+        *stack_.template Push<Ch>() = '\0';
+        stack_.ShrinkToFit();
+        stack_.template Pop<Ch>(1);
+    }
+    Ch* Push(size_t count) { return stack_.template Push<Ch>(count); }
+    void Pop(size_t count) { stack_.template Pop<Ch>(count); }
+
+    const Ch* GetString() const {
+        // Push and pop a null terminator. This is safe.
+        *stack_.template Push<Ch>() = '\0';
+        stack_.template Pop<Ch>(1);
+
+        return stack_.template Bottom<Ch>();
+    }
+
+    size_t GetSize() const { return stack_.GetSize(); }
+
+    static const size_t kDefaultCapacity = 256;
+    mutable internal::Stack<Allocator> stack_;
+
+private:
+    // Prohibit copy constructor & assignment operator.
+    GenericStringBuffer(const GenericStringBuffer&);
+    GenericStringBuffer& operator=(const GenericStringBuffer&);
+};
+
+//! String buffer with UTF8 encoding
+typedef GenericStringBuffer<UTF8<> > StringBuffer;
+
+//! Implement specialized version of PutN() with memset() for better performance.
+template<>
+inline void PutN(GenericStringBuffer<UTF8<> >& stream, char c, size_t n) {
+    std::memset(stream.stack_.Push<char>(n), c, n * sizeof(c));
+}
+
+RAPIDJSON_NAMESPACE_END
+
+#endif // RAPIDJSON_STRINGBUFFER_H_

libs/rapidjson/writer.h

@@ -0,0 +1,395 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_WRITER_H_
+#define RAPIDJSON_WRITER_H_
+
+#include "rapidjson.h"
+#include "internal/stack.h"
+#include "internal/strfunc.h"
+#include "internal/dtoa.h"
+#include "internal/itoa.h"
+#include "stringbuffer.h"
+#include <new>      // placement new
+
+#if RAPIDJSON_HAS_STDSTRING
+#include <string>
+#endif
+
+#ifdef _MSC_VER
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(4127) // conditional expression is constant
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! JSON writer
+/*! Writer implements the concept Handler.
+    It generates JSON text by events to an output os.
+
+    User may programmatically calls the functions of a writer to generate JSON text.
+
+    On the other side, a writer can also be passed to objects that generates events, 
+
+    for example Reader::Parse() and Document::Accept().
+
+    \tparam OutputStream Type of output stream.
+    \tparam SourceEncoding Encoding of source string.
+    \tparam TargetEncoding Encoding of output stream.
+    \tparam StackAllocator Type of allocator for allocating memory of stack.
+    \note implements Handler concept
+*/
+template<typename OutputStream, typename SourceEncoding = UTF8<>, typename TargetEncoding = UTF8<>, typename StackAllocator = CrtAllocator>
+class Writer {
+public:
+    typedef typename SourceEncoding::Ch Ch;
+
+    //! Constructor
+    /*! \param os Output stream.
+        \param stackAllocator User supplied allocator. If it is null, it will create a private one.
+        \param levelDepth Initial capacity of stack.
+    */
+    explicit
+    Writer(OutputStream& os, StackAllocator* stackAllocator = 0, size_t levelDepth = kDefaultLevelDepth) : 
+        os_(&os), level_stack_(stackAllocator, levelDepth * sizeof(Level)), hasRoot_(false) {}
+
+    explicit
+    Writer(StackAllocator* allocator = 0, size_t levelDepth = kDefaultLevelDepth) :
+        os_(0), level_stack_(allocator, levelDepth * sizeof(Level)), hasRoot_(false) {}
+
+    //! Reset the writer with a new stream.
+    /*!
+        This function reset the writer with a new stream and default settings,
+        in order to make a Writer object reusable for output multiple JSONs.
+
+        \param os New output stream.
+        \code
+        Writer<OutputStream> writer(os1);
+        writer.StartObject();
+        // ...
+        writer.EndObject();
+
+        writer.Reset(os2);
+        writer.StartObject();
+        // ...
+        writer.EndObject();
+        \endcode
+    */
+    void Reset(OutputStream& os) {
+        os_ = &os;
+        hasRoot_ = false;
+        level_stack_.Clear();
+    }
+
+    //! Checks whether the output is a complete JSON.
+    /*!
+        A complete JSON has a complete root object or array.
+    */
+    bool IsComplete() const {
+        return hasRoot_ && level_stack_.Empty();
+    }
+
+    /*!@name Implementation of Handler
+        \see Handler
+    */
+    //@{
+
+    bool Null()                 { Prefix(kNullType);   return WriteNull(); }
+    bool Bool(bool b)           { Prefix(b ? kTrueType : kFalseType); return WriteBool(b); }
+    bool Int(int i)             { Prefix(kNumberType); return WriteInt(i); }
+    bool Uint(unsigned u)       { Prefix(kNumberType); return WriteUint(u); }
+    bool Int64(int64_t i64)     { Prefix(kNumberType); return WriteInt64(i64); }
+    bool Uint64(uint64_t u64)   { Prefix(kNumberType); return WriteUint64(u64); }
+
+    //! Writes the given \c double value to the stream
+    /*!
+        \param d The value to be written.
+        \return Whether it is succeed.
+    */
+    bool Double(double d)       { Prefix(kNumberType); return WriteDouble(d); }
+
+    bool String(const Ch* str, SizeType length, bool copy = false) {
+        (void)copy;
+        Prefix(kStringType);
+        return WriteString(str, length);
+    }
+
+#if RAPIDJSON_HAS_STDSTRING
+    bool String(const std::basic_string<Ch>& str) {
+        return String(str.data(), SizeType(str.size()));
+    }
+#endif
+
+    bool StartObject() {
+        Prefix(kObjectType);
+        new (level_stack_.template Push<Level>()) Level(false);
+        return WriteStartObject();
+    }
+
+    bool Key(const Ch* str, SizeType length, bool copy = false) { return String(str, length, copy); }
+	
+    bool EndObject(SizeType memberCount = 0) {
+        (void)memberCount;
+        RAPIDJSON_ASSERT(level_stack_.GetSize() >= sizeof(Level));
+        RAPIDJSON_ASSERT(!level_stack_.template Top<Level>()->inArray);
+        level_stack_.template Pop<Level>(1);
+        bool ret = WriteEndObject();
+        if (level_stack_.Empty())   // end of json text
+            os_->Flush();
+        return ret;
+    }
+
+    bool StartArray() {
+        Prefix(kArrayType);
+        new (level_stack_.template Push<Level>()) Level(true);
+        return WriteStartArray();
+    }
+
+    bool EndArray(SizeType elementCount = 0) {
+        (void)elementCount;
+        RAPIDJSON_ASSERT(level_stack_.GetSize() >= sizeof(Level));
+        RAPIDJSON_ASSERT(level_stack_.template Top<Level>()->inArray);
+        level_stack_.template Pop<Level>(1);
+        bool ret = WriteEndArray();
+        if (level_stack_.Empty())   // end of json text
+            os_->Flush();
+        return ret;
+    }
+    //@}
+
+    /*! @name Convenience extensions */
+    //@{
+
+    //! Simpler but slower overload.
+    bool String(const Ch* str) { return String(str, internal::StrLen(str)); }
+    bool Key(const Ch* str) { return Key(str, internal::StrLen(str)); }
+
+    //@}
+
+protected:
+    //! Information for each nested level
+    struct Level {
+        Level(bool inArray_) : valueCount(0), inArray(inArray_) {}
+        size_t valueCount;  //!< number of values in this level
+        bool inArray;       //!< true if in array, otherwise in object
+    };
+
+    static const size_t kDefaultLevelDepth = 32;
+
+    bool WriteNull()  {
+        os_->Put('n'); os_->Put('u'); os_->Put('l'); os_->Put('l'); return true;
+    }
+
+    bool WriteBool(bool b)  {
+        if (b) {
+            os_->Put('t'); os_->Put('r'); os_->Put('u'); os_->Put('e');
+        }
+        else {
+            os_->Put('f'); os_->Put('a'); os_->Put('l'); os_->Put('s'); os_->Put('e');
+        }
+        return true;
+    }
+
+    bool WriteInt(int i) {
+        char buffer[11];
+        const char* end = internal::i32toa(i, buffer);
+        for (const char* p = buffer; p != end; ++p)
+            os_->Put(*p);
+        return true;
+    }
+
+    bool WriteUint(unsigned u) {
+        char buffer[10];
+        const char* end = internal::u32toa(u, buffer);
+        for (const char* p = buffer; p != end; ++p)
+            os_->Put(*p);
+        return true;
+    }
+
+    bool WriteInt64(int64_t i64) {
+        char buffer[21];
+        const char* end = internal::i64toa(i64, buffer);
+        for (const char* p = buffer; p != end; ++p)
+            os_->Put(*p);
+        return true;
+    }
+
+    bool WriteUint64(uint64_t u64) {
+        char buffer[20];
+        char* end = internal::u64toa(u64, buffer);
+        for (char* p = buffer; p != end; ++p)
+            os_->Put(*p);
+        return true;
+    }
+
+    bool WriteDouble(double d) {
+        char buffer[25];
+        char* end = internal::dtoa(d, buffer);
+        for (char* p = buffer; p != end; ++p)
+            os_->Put(*p);
+        return true;
+    }
+
+    bool WriteString(const Ch* str, SizeType length)  {
+        static const char hexDigits[16] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' };
+        static const char escape[256] = {
+#define Z16 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+            //0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F
+            'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'b', 't', 'n', 'u', 'f', 'r', 'u', 'u', // 00
+            'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', 'u', // 10
+              0,   0, '"',   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0, // 20
+            Z16, Z16,                                                                       // 30~4F
+              0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,'\\',   0,   0,   0, // 50
+            Z16, Z16, Z16, Z16, Z16, Z16, Z16, Z16, Z16, Z16                                // 60~FF
+#undef Z16
+        };
+
+        os_->Put('\"');
+        GenericStringStream<SourceEncoding> is(str);
+        while (is.Tell() < length) {
+            const Ch c = is.Peek();
+            if (!TargetEncoding::supportUnicode && (unsigned)c >= 0x80) {
+                // Unicode escaping
+                unsigned codepoint;
+                if (!SourceEncoding::Decode(is, &codepoint))
+                    return false;
+                os_->Put('\\');
+                os_->Put('u');
+                if (codepoint <= 0xD7FF || (codepoint >= 0xE000 && codepoint <= 0xFFFF)) {
+                    os_->Put(hexDigits[(codepoint >> 12) & 15]);
+                    os_->Put(hexDigits[(codepoint >>  8) & 15]);
+                    os_->Put(hexDigits[(codepoint >>  4) & 15]);
+                    os_->Put(hexDigits[(codepoint      ) & 15]);
+                }
+                else {
+                    RAPIDJSON_ASSERT(codepoint >= 0x010000 && codepoint <= 0x10FFFF);
+                    // Surrogate pair
+                    unsigned s = codepoint - 0x010000;
+                    unsigned lead = (s >> 10) + 0xD800;
+                    unsigned trail = (s & 0x3FF) + 0xDC00;
+                    os_->Put(hexDigits[(lead >> 12) & 15]);
+                    os_->Put(hexDigits[(lead >>  8) & 15]);
+                    os_->Put(hexDigits[(lead >>  4) & 15]);
+                    os_->Put(hexDigits[(lead      ) & 15]);
+                    os_->Put('\\');
+                    os_->Put('u');
+                    os_->Put(hexDigits[(trail >> 12) & 15]);
+                    os_->Put(hexDigits[(trail >>  8) & 15]);
+                    os_->Put(hexDigits[(trail >>  4) & 15]);
+                    os_->Put(hexDigits[(trail      ) & 15]);                    
+                }
+            }
+            else if ((sizeof(Ch) == 1 || (unsigned)c < 256) && escape[(unsigned char)c])  {
+                is.Take();
+                os_->Put('\\');
+                os_->Put(escape[(unsigned char)c]);
+                if (escape[(unsigned char)c] == 'u') {
+                    os_->Put('0');
+                    os_->Put('0');
+                    os_->Put(hexDigits[(unsigned char)c >> 4]);
+                    os_->Put(hexDigits[(unsigned char)c & 0xF]);
+                }
+            }
+            else
+                if (!Transcoder<SourceEncoding, TargetEncoding>::Transcode(is, *os_))
+                    return false;
+        }
+        os_->Put('\"');
+        return true;
+    }
+
+    bool WriteStartObject() { os_->Put('{'); return true; }
+    bool WriteEndObject()   { os_->Put('}'); return true; }
+    bool WriteStartArray()  { os_->Put('['); return true; }
+    bool WriteEndArray()    { os_->Put(']'); return true; }
+
+    void Prefix(Type type) {
+        (void)type;
+        if (level_stack_.GetSize() != 0) { // this value is not at root
+            Level* level = level_stack_.template Top<Level>();
+            if (level->valueCount > 0) {
+                if (level->inArray) 
+                    os_->Put(','); // add comma if it is not the first element in array
+                else  // in object
+                    os_->Put((level->valueCount % 2 == 0) ? ',' : ':');
+            }
+            if (!level->inArray && level->valueCount % 2 == 0)
+                RAPIDJSON_ASSERT(type == kStringType);  // if it's in object, then even number should be a name
+            level->valueCount++;
+        }
+        else {
+            RAPIDJSON_ASSERT(!hasRoot_);    // Should only has one and only one root.
+            hasRoot_ = true;
+        }
+    }
+
+    OutputStream* os_;
+    internal::Stack<StackAllocator> level_stack_;
+    bool hasRoot_;
+
+private:
+    // Prohibit copy constructor & assignment operator.
+    Writer(const Writer&);
+    Writer& operator=(const Writer&);
+};
+
+// Full specialization for StringStream to prevent memory copying
+
+template<>
+inline bool Writer<StringBuffer>::WriteInt(int i) {
+    char *buffer = os_->Push(11);
+    const char* end = internal::i32toa(i, buffer);
+    os_->Pop(11 - (end - buffer));
+    return true;
+}
+
+template<>
+inline bool Writer<StringBuffer>::WriteUint(unsigned u) {
+    char *buffer = os_->Push(10);
+    const char* end = internal::u32toa(u, buffer);
+    os_->Pop(10 - (end - buffer));
+    return true;
+}
+
+template<>
+inline bool Writer<StringBuffer>::WriteInt64(int64_t i64) {
+    char *buffer = os_->Push(21);
+    const char* end = internal::i64toa(i64, buffer);
+    os_->Pop(21 - (end - buffer));
+    return true;
+}
+
+template<>
+inline bool Writer<StringBuffer>::WriteUint64(uint64_t u) {
+    char *buffer = os_->Push(20);
+    const char* end = internal::u64toa(u, buffer);
+    os_->Pop(20 - (end - buffer));
+    return true;
+}
+
+template<>
+inline bool Writer<StringBuffer>::WriteDouble(double d) {
+    char *buffer = os_->Push(25);
+    char* end = internal::dtoa(d, buffer);
+    os_->Pop(25 - (end - buffer));
+    return true;
+}
+
+RAPIDJSON_NAMESPACE_END
+
+#ifdef _MSC_VER
+RAPIDJSON_DIAG_POP
+#endif
+
+#endif // RAPIDJSON_RAPIDJSON_H_

main.cpp

@@ -1,156 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/time.h>
-#include <signal.h>
-#if defined(__linux__) || (defined(__APPLE__) && defined(__MACH__))
-#include <execinfo.h>
-#include <sys/resource.h>
-#endif
-#include <stddef.h>
-
-#include "utils/gettime.h"
-#include "utils/logoutput.h"
-#include "sliceDataStorage.h"
-
-#include "modelFile/modelFile.h"
-#include "settings.h"
-#include "optimizedModel.h"
-#include "multiVolumes.h"
-#include "polygonOptimizer.h"
-#include "slicer.h"
-#include "layerPart.h"
-#include "inset.h"
-#include "skin.h"
-#include "infill.h"
-#include "bridge.h"
-#include "support.h"
-#include "pathOrderOptimizer.h"
-#include "skirt.h"
-#include "raft.h"
-#include "comb.h"
-#include "gcodeExport.h"
-#include "fffProcessor.h"
-
-void print_usage()
-{
-    log("usage: CuraEngine [-h] [-v] [-m 3x3matrix] [-c <config file>] [-s <settingkey>=<value>] -o <output.gcode> <model.stl>\n");
-}
-
-//Signal handler for a "floating point exception", which can also be integer division by zero errors.
-void signal_FPE(int n)
-{
-    (void)n;
-    logError("Arithmetic exception.\n");
-    exit(1);
-}
-
-int main(int argc, char **argv)
-{
-#if defined(__linux__) || (defined(__APPLE__) && defined(__MACH__))
-    //Lower the process priority on linux and mac. On windows this is done on process creation from the GUI.
-    setpriority(PRIO_PROCESS, 0, 10);
-#endif
-
-    //Register the exception handling for arithmic exceptions, this prevents the "something went wrong" dialog on windows to pop up on a division by zero.
-    signal(SIGFPE, signal_FPE);
-
-    ConfigSettings config;
-    fffProcessor processor(config);
-
-    logError("Cura_SteamEngine version %s\n", VERSION);
-
-    if(!config.readSettings()) {
-        logError("Default config '%s' not used\n", DEFAULT_CONFIG_PATH);
-    }
-    for(int argn = 1; argn < argc; argn++)
-        log("Arg: %s\n", argv[argn]);
-    
-    for(int argn = 1; argn < argc; argn++)
-    {
-        char* str = argv[argn];
-        if (str[0] == '-')
-        {
-            for(str++; *str; str++)
-            {
-                switch(*str)
-                {
-                case 'h':
-                    print_usage();
-                    exit(1);
-                case 'v':
-                    increaseVerboseLevel();
-                    break;
-                case 'p':
-                    enableProgressLogging();
-                    break;
-                case 'g':
-                    argn++;
-                    //Connect the GUI socket to the given port number.
-                    processor.guiConnect(atoi(argv[argn]));
-                    break;
-                case 'b':
-                    argn++;
-                    //The binaryMeshBlob is depricated and will be removed in the future.
-                    binaryMeshBlob = fopen(argv[argn], "rb");
-                    break;
-                case 'o':
-                    argn++;
-                    if (!processor.setTargetFile(argv[argn]))
-                    {
-                        logError("Failed to open %s for output.\n", argv[argn]);
-                        exit(1);
-                    }
-                    break;
-                case 'c':
-                    {
-                        // Read a config file from the given path
-                        argn++;
-                        if(!config.readSettings(argv[argn])) {
-                            logError("Failed to read config '%s'\n", argv[argn]);
-                        }
-                    }
-                    break;
-                case 's':
-                    {
-                        //Parse the given setting and store it.
-                        argn++;
-                        char* valuePtr = strchr(argv[argn], '=');
-                        if (valuePtr)
-                        {
-                            *valuePtr++ = '\0';
-
-                            if (!config.setSetting(argv[argn], valuePtr))
-                                logError("Setting not found: %s %s\n", argv[argn], valuePtr);
-                        }
-                    }
-                    break;
-                case 'm':
-                    //Read the given rotation/scale matrix
-                    argn++;
-                    sscanf(argv[argn], "%lf,%lf,%lf,%lf,%lf,%lf,%lf,%lf,%lf",
-                        &config.matrix.m[0][0], &config.matrix.m[0][1], &config.matrix.m[0][2],
-                        &config.matrix.m[1][0], &config.matrix.m[1][1], &config.matrix.m[1][2],
-                        &config.matrix.m[2][0], &config.matrix.m[2][1], &config.matrix.m[2][2]);
-                    break;
-                default:
-                    logError("Unknown option: %c\n", *str);
-                    break;
-                }
-            }
-        }else{
-            try {
-                //Catch all exceptions, this prevents the "something went wrong" dialog on windows to pop up on a thrown exception.
-                // Only ClipperLib currently throws exceptions. And only in case that it makes an internal error.
-                processor.processFile(argv[argn]);
-            }catch(...){
-                logError("Unknown exception\n");
-                exit(1);
-            }
-        }
-    }
-
-    //Finalize the processor, this adds the end.gcode. And reports statistics.
-    processor.finalize();
-}

modelFile/modelFile.cpp

@@ -1,178 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include <string.h>
-#include <stdio.h>
-
-#include "modelFile.h"
-#include "../utils/logoutput.h"
-
-FILE* binaryMeshBlob = NULL;
-
-/* Custom fgets function to support Mac line-ends in Ascii STL files. OpenSCAD produces this when used on Mac */
-void* fgets_(char* ptr, size_t len, FILE* f)
-{
-    while(len && fread(ptr, 1, 1, f) > 0)
-    {
-        if (*ptr == '\n' || *ptr == '\r')
-        {
-            *ptr = '\0';
-            return ptr;
-        }
-        ptr++;
-        len--;
-    }
-    return NULL;
-}
-
-SimpleModel* loadModelSTL_ascii(const char* filename, FMatrix3x3& matrix)
-{
-    SimpleModel* m = new SimpleModel();
-    m->volumes.push_back(SimpleVolume());
-    SimpleVolume* vol = &m->volumes[0];
-    FILE* f = fopen(filename, "rt");
-    char buffer[1024];
-    FPoint3 vertex;
-    int n = 0;
-    Point3 v0(0,0,0), v1(0,0,0), v2(0,0,0);
-    while(fgets_(buffer, sizeof(buffer), f))
-    {
-        if (sscanf(buffer, " vertex %lf %lf %lf", &vertex.x, &vertex.y, &vertex.z) == 3)
-        {
-            n++;
-            switch(n)
-            {
-            case 1:
-                v0 = matrix.apply(vertex);
-                break;
-            case 2:
-                v1 = matrix.apply(vertex);
-                break;
-            case 3:
-                v2 = matrix.apply(vertex);
-                vol->addFace(v0, v1, v2);
-                n = 0;
-                break;
-            }
-        }
-    }
-    fclose(f);
-    return m;
-}
-
-SimpleModel* loadModelSTL_binary(const char* filename, FMatrix3x3& matrix)
-{
-    FILE* f = fopen(filename, "rb");
-    char buffer[80];
-    uint32_t faceCount;
-    //Skip the header
-    if (fread(buffer, 80, 1, f) != 1)
-    {
-        fclose(f);
-        return NULL;
-    }
-    //Read the face count
-    if (fread(&faceCount, sizeof(uint32_t), 1, f) != 1)
-    {
-        fclose(f);
-        return NULL;
-    }
-    //For each face read:
-    //float(x,y,z) = normal, float(X,Y,Z)*3 = vertexes, uint16_t = flags
-    SimpleModel* m = new SimpleModel();
-    m->volumes.push_back(SimpleVolume());
-    SimpleVolume* vol = &m->volumes[0];
-	if(vol == NULL)
-	{
-		fclose(f);
-		return NULL;
-	}
-
-    for(unsigned int i=0;i<faceCount;i++)
-    {
-        if (fread(buffer, sizeof(float) * 3, 1, f) != 1)
-        {
-            fclose(f);
-            return NULL;
-        }
-        float v[9];
-        if (fread(v, sizeof(float) * 9, 1, f) != 1)
-        {
-            fclose(f);
-            return NULL;
-        }
-        Point3 v0 = matrix.apply(FPoint3(v[0], v[1], v[2]));
-        Point3 v1 = matrix.apply(FPoint3(v[3], v[4], v[5]));
-        Point3 v2 = matrix.apply(FPoint3(v[6], v[7], v[8]));
-        vol->addFace(v0, v1, v2);
-        if (fread(buffer, sizeof(uint16_t), 1, f) != 1)
-        {
-            fclose(f);
-            return NULL;
-        }
-    } 
-    fclose(f);
-    return m;
-}
-
-SimpleModel* loadModelSTL(const char* filename, FMatrix3x3& matrix)
-{
-    FILE* f = fopen(filename, "r");
-    char buffer[6];
-    if (f == NULL)
-        return NULL;
-    
-    if (fread(buffer, 5, 1, f) != 1)
-    {
-        fclose(f);
-        return NULL;
-    }
-    fclose(f);
-
-    buffer[5] = '\0';
-    if (strcasecmp(buffer, "SOLID") == 0)
-    {
-        return loadModelSTL_ascii(filename, matrix);
-    }
-    return loadModelSTL_binary(filename, matrix);
-}
-
-SimpleModel* loadModelFromFile(const char* filename, FMatrix3x3& matrix)
-{
-    const char* ext = strrchr(filename, '.');
-    if (ext && strcasecmp(ext, ".stl") == 0)
-    {
-        return loadModelSTL(filename, matrix);
-    }
-    if (filename[0] == '#' && binaryMeshBlob != NULL)
-    {
-        SimpleModel* m = new SimpleModel();
-        
-        while(*filename == '#')
-        {
-            filename++;
-            
-            m->volumes.push_back(SimpleVolume());
-            SimpleVolume* vol = &m->volumes[m->volumes.size()-1];
-            int32_t n, pNr = 0;
-            if (fread(&n, 1, sizeof(int32_t), binaryMeshBlob) < 1)
-                return NULL;
-            log("Reading mesh from binary blob with %i vertexes\n", n);
-            Point3 v[3];
-            while(n)
-            {
-                float f[3];
-                if (fread(f, 3, sizeof(float), binaryMeshBlob) < 1)
-                    return NULL;
-                FPoint3 fp(f[0], f[1], f[2]);
-                v[pNr++] = matrix.apply(fp);
-                if (pNr == 3)
-                {
-                    vol->addFace(v[0], v[1], v[2]);
-                    pNr = 0;
-                }
-                n--;
-            }
-        }
-        return m;
-    }
-    return NULL;
-}

modelFile/modelFile.h

@@ -1,118 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef MODELFILE_H
-#define MODELFILE_H
-/**
-modelFile contains the model loaders for the slicer. The model loader turns any format that it can read into a list of triangles with 3 X/Y/Z points.
-
-The format returned is a Model class with an array of faces, which have integer points with a resolution of 1 micron. Giving a maximum object size of 4 meters.
-**/
-
-#include <vector>
-using std::vector;
-#include "../utils/intpoint.h"
-#include "../utils/floatpoint.h"
-
-extern FILE* binaryMeshBlob;
-
-#define SET_MIN(n, m) do { if ((m) < (n)) n = m; } while(0)
-#define SET_MAX(n, m) do { if ((m) > (n)) n = m; } while(0)
-
-/* A SimpleFace is a 3 dimensional model triangle with 3 points. These points are already converted to integers */
-class SimpleFace
-{
-public:
-    Point3 v[3];
-    
-    SimpleFace(Point3& v0, Point3& v1, Point3& v2) { v[0] = v0; v[1] = v1; v[2] = v2; }
-};
-
-/* A SimpleVolume is the most basic reprisentation of a 3D model. It contains all the faces as SimpleTriangles, with nothing fancy. */
-class SimpleVolume
-{
-public:
-    vector<SimpleFace> faces;
-    
-    void addFace(Point3& v0, Point3& v1, Point3& v2)
-    {
-        faces.push_back(SimpleFace(v0, v1, v2));
-    }
-    
-    Point3 min()
-    {
-        if (faces.size() < 1)
-            return Point3(0, 0, 0);
-        Point3 ret = faces[0].v[0];
-        for(unsigned int i=0; i<faces.size(); i++)
-        {
-            SET_MIN(ret.x, faces[i].v[0].x);
-            SET_MIN(ret.y, faces[i].v[0].y);
-            SET_MIN(ret.z, faces[i].v[0].z);
-            SET_MIN(ret.x, faces[i].v[1].x);
-            SET_MIN(ret.y, faces[i].v[1].y);
-            SET_MIN(ret.z, faces[i].v[1].z);
-            SET_MIN(ret.x, faces[i].v[2].x);
-            SET_MIN(ret.y, faces[i].v[2].y);
-            SET_MIN(ret.z, faces[i].v[2].z);
-        }
-        return ret;
-    }
-    Point3 max()
-    {
-        if (faces.size() < 1)
-            return Point3(0, 0, 0);
-        Point3 ret = faces[0].v[0];
-        for(unsigned int i=0; i<faces.size(); i++)
-        {
-            SET_MAX(ret.x, faces[i].v[0].x);
-            SET_MAX(ret.y, faces[i].v[0].y);
-            SET_MAX(ret.z, faces[i].v[0].z);
-            SET_MAX(ret.x, faces[i].v[1].x);
-            SET_MAX(ret.y, faces[i].v[1].y);
-            SET_MAX(ret.z, faces[i].v[1].z);
-            SET_MAX(ret.x, faces[i].v[2].x);
-            SET_MAX(ret.y, faces[i].v[2].y);
-            SET_MAX(ret.z, faces[i].v[2].z);
-        }
-        return ret;
-    }
-};
-
-//A SimpleModel is a 3D model with 1 or more 3D volumes.
-class SimpleModel
-{
-public:
-    vector<SimpleVolume> volumes;
-
-    Point3 min()
-    {
-        if (volumes.size() < 1)
-            return Point3(0, 0, 0);
-        Point3 ret = volumes[0].min();
-        for(unsigned int i=0; i<volumes.size(); i++)
-        {
-            Point3 v = volumes[i].min();
-            SET_MIN(ret.x, v.x);
-            SET_MIN(ret.y, v.y);
-            SET_MIN(ret.z, v.z);
-        }
-        return ret;
-    }
-    Point3 max()
-    {
-        if (volumes.size() < 1)
-            return Point3(0, 0, 0);
-        Point3 ret = volumes[0].max();
-        for(unsigned int i=0; i<volumes.size(); i++)
-        {
-            Point3 v = volumes[i].max();
-            SET_MAX(ret.x, v.x);
-            SET_MAX(ret.y, v.y);
-            SET_MAX(ret.z, v.z);
-        }
-        return ret;
-    }
-};
-
-SimpleModel* loadModelFromFile(const char* filename, FMatrix3x3& matrix);
-
-#endif//MODELFILE_H

optimizedModel.cpp

@@ -1,121 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include <stdio.h>
-
-#include "utils/gettime.h"
-#include "utils/logoutput.h"
-#include "optimizedModel.h"
-
-#define MELD_DIST MM2INT(0.03)
-OptimizedVolume::OptimizedVolume(SimpleVolume* volume, OptimizedModel* model)
-: model(model)
-{
-    points.reserve(volume->faces.size() * 3);
-    faces.reserve(volume->faces.size());
-
-    std::map<uint32_t, std::vector<uint32_t> > indexMap;
-    
-    double t = getTime();
-    for(uint32_t i=0; i<volume->faces.size(); i++)
-    {
-        OptimizedFace f;
-        if((i%1000==0) && (getTime()-t)>2.0) logProgress("optimized", i + 1, volume->faces.size());
-        for(uint32_t j=0; j<3; j++)
-        {
-            Point3 p = volume->faces[i].v[j];
-            int hash = ((p.x + MELD_DIST/2) / MELD_DIST) ^ (((p.y + MELD_DIST/2) / MELD_DIST) << 10) ^ (((p.z + MELD_DIST/2) / MELD_DIST) << 20);
-            uint32_t idx;
-            bool add = true;
-            for(unsigned int n = 0; n < indexMap[hash].size(); n++)
-            {
-                if ((points[indexMap[hash][n]].p - p).testLength(MELD_DIST))
-                {
-                    idx = indexMap[hash][n];
-                    add = false;
-                    break;
-                }
-            }
-            if (add)
-            {
-                indexMap[hash].push_back(points.size());
-                idx = points.size();
-                points.push_back(p);
-            }
-            f.index[j] = idx;
-        }
-        if (f.index[0] != f.index[1] && f.index[0] != f.index[2] && f.index[1] != f.index[2])
-        {
-            //Check if there is a face with the same points
-            bool duplicate = false;
-            for(unsigned int _idx0 = 0; _idx0 < points[f.index[0]].faceIndexList.size(); _idx0++)
-            {
-                for(unsigned int _idx1 = 0; _idx1 < points[f.index[1]].faceIndexList.size(); _idx1++)
-                {
-                    for(unsigned int _idx2 = 0; _idx2 < points[f.index[2]].faceIndexList.size(); _idx2++)
-                    {
-                        if (points[f.index[0]].faceIndexList[_idx0] == points[f.index[1]].faceIndexList[_idx1] && points[f.index[0]].faceIndexList[_idx0] == points[f.index[2]].faceIndexList[_idx2])
-                            duplicate = true;
-                    }
-                }
-            }
-            if (!duplicate)
-            {
-                points[f.index[0]].faceIndexList.push_back(faces.size());
-                points[f.index[1]].faceIndexList.push_back(faces.size());
-                points[f.index[2]].faceIndexList.push_back(faces.size());
-                faces.push_back(f);
-            }
-        }
-    }
-    //fprintf(stdout, "\rAll faces are optimized in %5.1fs.\n",timeElapsed(t));
-
-    int openFacesCount = 0;
-    for(unsigned int i=0;i<faces.size();i++)
-    {
-        OptimizedFace* f = &faces[i];
-        f->touching[0] = getFaceIdxWithPoints(f->index[0], f->index[1], i);
-        f->touching[1] = getFaceIdxWithPoints(f->index[1], f->index[2], i);
-        f->touching[2] = getFaceIdxWithPoints(f->index[2], f->index[0], i);
-        if (f->touching[0] == -1)
-            openFacesCount++;
-        if (f->touching[1] == -1)
-            openFacesCount++;
-        if (f->touching[2] == -1)
-            openFacesCount++;
-    }
-    //fprintf(stdout, "  Number of open faces: %i\n", openFacesCount);
-}
-
-
-void OptimizedModel::saveDebugSTL(const char* filename)
-{
-    char buffer[80] = "Cura_Engine_STL_export";
-    uint32_t n;
-    uint16_t s;
-    float flt;
-    OptimizedVolume* vol = &volumes[0];
-    FILE* f = fopen(filename, "wb");
-    fwrite(buffer, 80, 1, f);
-    n = vol->faces.size();
-    fwrite(&n, sizeof(n), 1, f);
-    for(unsigned int i=0;i<vol->faces.size();i++)
-    {
-        flt = 0;
-        s = 0;
-        fwrite(&flt, sizeof(flt), 1, f);
-        fwrite(&flt, sizeof(flt), 1, f);
-        fwrite(&flt, sizeof(flt), 1, f);
-
-        flt = INT2MM(vol->points[vol->faces[i].index[0]].p.x); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[0]].p.y); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[0]].p.z); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[1]].p.x); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[1]].p.y); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[1]].p.z); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[2]].p.x); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[2]].p.y); fwrite(&flt, sizeof(flt), 1, f);
-        flt = INT2MM(vol->points[vol->faces[i].index[2]].p.z); fwrite(&flt, sizeof(flt), 1, f);
-
-        fwrite(&s, sizeof(s), 1, f);
-    }
-    fclose(f);
-}

optimizedModel.h

@@ -1,77 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef OPTIMIZED_MODEL_H
-#define OPTIMIZED_MODEL_H
-
-#include <map>
-#include "modelFile/modelFile.h"
-
-class OptimizedFace
-{
-public:
-    int index[3];
-    int touching[3];
-};
-class OptimizedPoint3
-{
-public:
-    Point3 p;
-    vector<uint32_t> faceIndexList;
-    
-    OptimizedPoint3(Point3 p): p(p) {}
-};
-
-class OptimizedModel;
-class OptimizedVolume
-{
-public:
-    OptimizedModel* model;
-    vector<OptimizedPoint3> points;
-    vector<OptimizedFace> faces;
-    
-    OptimizedVolume(SimpleVolume* volume, OptimizedModel* model);
-    
-    int getFaceIdxWithPoints(int idx0, int idx1, int notFaceIdx)
-    {
-        for(unsigned int i=0;i<points[idx0].faceIndexList.size();i++)
-        {
-            int f0 = points[idx0].faceIndexList[i];
-            if (f0 == notFaceIdx) continue;
-            for(unsigned int j=0;j<points[idx1].faceIndexList.size();j++)
-            {
-                int f1 = points[idx1].faceIndexList[j];
-                if (f1 == notFaceIdx) continue;
-                if (f0 == f1) return f0;
-            }
-        }
-        return -1;
-    }
-};
-class OptimizedModel
-{
-public:
-    vector<OptimizedVolume> volumes;
-    Point3 modelSize;
-    Point3 vMin, vMax;
-    
-    OptimizedModel(SimpleModel* model, Point3 center)
-    {
-        for(unsigned int i=0; i<model->volumes.size(); i++)
-            volumes.push_back(OptimizedVolume(&model->volumes[i], this));
-        vMin = model->min();
-        vMax = model->max();
-
-        Point3 vOffset((vMin.x + vMax.x) / 2, (vMin.y + vMax.y) / 2, vMin.z);
-        vOffset -= center;
-        for(unsigned int i=0; i<volumes.size(); i++)
-            for(unsigned int n=0; n<volumes[i].points.size(); n++)
-                volumes[i].points[n].p -= vOffset;
-        
-        modelSize = vMax - vMin;
-        vMin -= vOffset;
-        vMax -= vOffset;
-    }
-
-    void saveDebugSTL(const char* filename);
-};
-
-#endif//OPTIMIZED_MODEL_H

pathOrderOptimizer.cpp

@@ -1,95 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "pathOrderOptimizer.h"
-
-void PathOrderOptimizer::optimize()
-{
-    std::vector<bool> picked;
-    for(unsigned int i=0;i<polygons.size(); i++)
-    {
-        int best = -1;
-        float bestDist = 0xFFFFFFFFFFFFFFFFLL;
-        PolygonRef poly = polygons[i];
-        for(unsigned int j=0; j<poly.size(); j++)
-        {
-            float dist = vSize2f(poly[j] - startPoint);
-            if (dist < bestDist)
-            {
-                best = j;
-                bestDist = dist;
-            }
-        }
-        polyStart.push_back(best);
-        picked.push_back(false);
-    }
-
-    Point p0 = startPoint;
-    for(unsigned int n=0; n<polygons.size(); n++)
-    {
-        int best = -1;
-        float bestDist = 0xFFFFFFFFFFFFFFFFLL;
-        for(unsigned int i=0;i<polygons.size(); i++)
-        {
-            if (picked[i] || polygons[i].size() < 1)
-                continue;
-            if (polygons[i].size() == 2)
-            {
-                float dist = vSize2f(polygons[i][0] - p0);
-                if (dist < bestDist)
-                {
-                    best = i;
-                    bestDist = dist;
-                    polyStart[i] = 0;
-                }
-                dist = vSize2f(polygons[i][1] - p0);
-                if (dist < bestDist)
-                {
-                    best = i;
-                    bestDist = dist;
-                    polyStart[i] = 1;
-                }
-            }else{
-                float dist = vSize2f(polygons[i][polyStart[i]] - p0);
-                if (dist < bestDist)
-                {
-                    best = i;
-                    bestDist = dist;
-                }
-            }
-        }
-        if (best > -1)
-        {
-            if (polygons[best].size() == 2)
-            {
-                p0 = polygons[best][(polyStart[best] + 1) % 2];
-            }else{
-                p0 = polygons[best][polyStart[best]];
-            }
-            picked[best] = true;
-            polyOrder.push_back(best);
-        }
-    }
-    
-    p0 = startPoint;
-    for(unsigned int n=0; n<polyOrder.size(); n++)
-    {
-        int nr = polyOrder[n];
-        int best = -1;
-        float bestDist = 0xFFFFFFFFFFFFFFFFLL;
-        for(unsigned int i=0;i<polygons[nr].size(); i++)
-        {
-            float dist = vSize2f(polygons[nr][i] - p0);
-            if (dist < bestDist)
-            {
-                best = i;
-                bestDist = dist;
-            }
-        }
-        polyStart[nr] = best;
-        if (polygons[nr].size() <= 2)
-        {
-            p0 = polygons[nr][(best + 1) % 2];
-        }else{
-            p0 = polygons[nr][best];
-        }
-    }
-}

pathOrderOptimizer.h

@@ -1,35 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef PATHOPTIMIZER_H
-#define PATHOPTIMIZER_H
-
-#include <stdint.h>
-#include "utils/polygon.h"
-
-class PathOrderOptimizer
-{
-public:
-    Point startPoint;
-    vector<PolygonRef> polygons;
-    vector<int> polyStart;
-    vector<int> polyOrder;
-
-    PathOrderOptimizer(Point startPoint)
-    {
-        this->startPoint = startPoint;
-    }
-
-    void addPolygon(PolygonRef polygon)
-    {
-        this->polygons.push_back(polygon);
-    }
-    
-    void addPolygons(Polygons& polygons)
-    {
-        for(unsigned int i=0;i<polygons.size(); i++)
-            this->polygons.push_back(polygons[i]);
-    }
-    
-    void optimize();
-};
-
-#endif//PATHOPTIMIZER_H

raft.cpp

@@ -1,20 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "raft.h"
-#include "support.h"
-
-void generateRaft(SliceDataStorage& storage, int distance)
-{
-    for(unsigned int volumeIdx = 0; volumeIdx < storage.volumes.size(); volumeIdx++)
-    {
-        if (storage.volumes[volumeIdx].layers.size() < 1) continue;
-        SliceLayer* layer = &storage.volumes[volumeIdx].layers[0];
-        for(unsigned int i=0; i<layer->parts.size(); i++)
-        {
-            storage.raftOutline = storage.raftOutline.unionPolygons(layer->parts[i].outline.offset(distance));
-        }
-    }
-
-    SupportPolyGenerator supportGenerator(storage.support, 0);
-    storage.raftOutline = storage.raftOutline.unionPolygons(supportGenerator.polygons.offset(distance));
-    storage.raftOutline = storage.raftOutline.unionPolygons(storage.wipeTower.offset(distance));
-}

settings.cpp

@@ -1,217 +0,0 @@
-#include <cctype>
-#include <fstream>
-#include <stdio.h>
-#include "utils/logoutput.h"
-
-#include "settings.h"
-
-#define LTRIM_STRING(s) do { while(((s).length() > 0) && isspace((s)[0])) { (s).erase(0, 1); } } while(0)
-#define RTRIM_STRING(s) do { while(((s).length() > 0) && isspace((s)[(s).length() - 1])) { (s).erase((s).length() - 1); } } while(0)
-#define TRIM_STRING(s) do { LTRIM_STRING(s); RTRIM_STRING(s); } while(0)
-#define STRINGIFY(_s) #_s
-#define SETTING(name, default) do { _index.push_back(_ConfigSettingIndex(STRINGIFY(name), &name)); name = (default); } while(0)
-#define SETTING2(name, altname, default) do { _index.push_back(_ConfigSettingIndex(STRINGIFY(name), &name)); _index.push_back(_ConfigSettingIndex(STRINGIFY(altname), &name)); name = (default); } while(0)
-
-ConfigSettings::ConfigSettings()
-{
-    SETTING(layerThickness, 100);
-    SETTING(initialLayerThickness, 300);
-    SETTING(filamentDiameter, 2890);
-    SETTING(filamentFlow, 100);
-    SETTING(extrusionWidth, 400);
-    SETTING(insetCount, 2);
-    SETTING(downSkinCount, 6);
-    SETTING(upSkinCount, 6);
-    SETTING(sparseInfillLineDistance, 100 * extrusionWidth / 20);
-    SETTING(infillOverlap, 15);
-    SETTING(skirtDistance, 6000);
-    SETTING(skirtLineCount, 1);
-    SETTING(skirtMinLength, 0);
-
-    SETTING(initialSpeedupLayers, 4);
-    SETTING(initialLayerSpeed, 20);
-    SETTING(printSpeed, 50);
-    SETTING(infillSpeed, 50);
-    SETTING(inset0Speed, 50);
-    SETTING(insetXSpeed, 50);
-    SETTING(moveSpeed, 150);
-    SETTING(fanFullOnLayerNr, 2);
-
-    SETTING(supportType, 0);
-    SETTING(supportAngle, -1);
-    SETTING(supportEverywhere, 0);
-    SETTING(supportLineDistance, sparseInfillLineDistance);
-    SETTING(supportXYDistance, 700);
-    SETTING(supportZDistance, 150);
-    SETTING(supportExtruder, -1);
-
-    SETTING(retractionAmount, 4500);
-    SETTING(retractionSpeed, 45);
-    SETTING(retractionAmountExtruderSwitch, 14500);
-    SETTING(retractionMinimalDistance, 1500);
-    SETTING(minimalExtrusionBeforeRetraction, 100);
-    SETTING(retractionZHop, 0);
-
-    SETTING(enableCombing, 1);
-    SETTING(enableOozeShield, 0);
-    SETTING(wipeTowerSize, 0);
-    SETTING(multiVolumeOverlap, 0);
-    SETTING2(objectPosition.X, posx, 102500);
-    SETTING2(objectPosition.Y, posy, 102500);
-    SETTING(objectSink, 0);
-
-    SETTING(raftMargin, 5000);
-    SETTING(raftLineSpacing, 1000);
-    SETTING(raftBaseThickness, 0);
-    SETTING(raftBaseLinewidth, 0);
-    SETTING(raftInterfaceThickness, 0);
-    SETTING(raftInterfaceLinewidth, 0);
-
-    SETTING(minimalLayerTime, 5);
-    SETTING(minimalFeedrate, 10);
-    SETTING(coolHeadLift, 0);
-    SETTING(fanSpeedMin, 100);
-    SETTING(fanSpeedMax, 100);
-
-    SETTING(fixHorrible, 0);
-    SETTING(spiralizeMode, 0);
-    SETTING(gcodeFlavor, GCODE_FLAVOR_REPRAP);
-
-    memset(extruderOffset, 0, sizeof(extruderOffset));
-    SETTING(extruderOffset[1].X, 0);
-    SETTING(extruderOffset[1].Y, 0);
-    SETTING(extruderOffset[2].X, 0);
-    SETTING(extruderOffset[2].Y, 0);
-    SETTING(extruderOffset[3].X, 0);
-    SETTING(extruderOffset[3].Y, 0);
-
-    startCode =
-        "M109 S210     ;Heatup to 210C\n"
-        "G21           ;metric values\n"
-        "G90           ;absolute positioning\n"
-        "G28           ;Home\n"
-        "G1 Z15.0 F300 ;move the platform down 15mm\n"
-        "G92 E0        ;zero the extruded length\n"
-        "G1 F200 E5    ;extrude 5mm of feed stock\n"
-        "G92 E0        ;zero the extruded length again\n";
-    endCode =
-        "M104 S0                     ;extruder heater off\n"
-        "M140 S0                     ;heated bed heater off (if you have it)\n"
-        "G91                            ;relative positioning\n"
-        "G1 E-1 F300                    ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n"
-        "G1 Z+0.5 E-5 X-20 Y-20 F9000   ;move Z up a bit and retract filament even more\n"
-        "G28 X0 Y0                      ;move X/Y to min endstops, so the head is out of the way\n"
-        "M84                         ;steppers off\n"
-        "G90                         ;absolute positioning\n";
-}
-
-#undef STRINGIFY
-#undef SETTING
-
-bool ConfigSettings::setSetting(const char* key, const char* value)
-{
-    for(unsigned int n=0; n < _index.size(); n++)
-    {
-        if (strcasecmp(key, _index[n].key) == 0)
-        {
-            *_index[n].ptr = atoi(value);
-            return true;
-        }
-    }
-    if (strcasecmp(key, "startCode") == 0)
-    {
-        this->startCode = value;
-        return true;
-    }
-    if (strcasecmp(key, "endCode") == 0)
-    {
-        this->endCode = value;
-        return true;
-    }
-    return false;
-}
-
-bool ConfigSettings::readSettings(void) {
-    return readSettings(DEFAULT_CONFIG_PATH);
-}
-
-bool ConfigSettings::readSettings(const char* path) {
-    std::ifstream config(path);
-    std::string line;
-    size_t line_number = 0;
-
-    if(!config.good()) return false;
-
-    while(config.good()) {
-        size_t pos = std::string::npos;
-        std::getline(config, line);
-        line_number += 1;
-
-        // De-comment and trim, skipping anything that shows up empty
-        pos = line.find_first_of('#');
-        if(pos != std::string::npos) line.erase(pos);
-        TRIM_STRING(line);
-        if(line.length() == 0) continue;
-
-        // Split into key = val
-        std::string key(""), val("");
-        pos = line.find_first_of('=');
-        if(pos != std::string::npos && line.length() > (pos + 1)) {
-            key = line.substr(0, pos);
-            val = line.substr(pos + 1);
-            TRIM_STRING(key);
-            TRIM_STRING(val);
-        }
-
-        // Are we about to read a multiline string?
-        if(val == CONFIG_MULTILINE_SEPARATOR) {
-            val = "";
-            bool done_multiline = false;
-
-            while(config.good() && !done_multiline) {
-                std::getline(config, line);
-                line_number += 1;
-
-                // We RTRIM the line for two reasons:
-                //
-                // 1) Make sure that a direct == comparison with '"""' works without
-                //    worrying about trailing space.
-                // 2) Nobody likes trailing whitespace anyway
-                RTRIM_STRING(line);
-
-                // Either accumuliate or terminate
-                if(line == CONFIG_MULTILINE_SEPARATOR) {
-                    done_multiline = true;
-                    // Make sure we don't add an extra trailing newline
-                    // to the parsed value
-                    RTRIM_STRING(val);
-                }
-                else {
-                    line += "\n";
-                    val += line;
-                }
-            }
-
-            // If we drop out but didn't finish reading, something failed
-            if(!done_multiline) {
-                logError("Config(%s):L%zd: Failed while reading multiline string.\n", path, line_number);
-                return false;
-            }
-
-        }
-
-        // Fail if we don't get a key and val
-        if(key.length() == 0 || val.length() == 0) {
-            logError("Config(%s): Line %zd: No key value pair found\n", path, line_number);
-            return false;
-        }
-
-        // Set a config setting for the current K=V
-        if(!setSetting(key.c_str(), val.c_str())) {
-            logError("Config(%s):L%zd: Failed to set '%s' to '%s'\n", path, line_number, key.c_str(), val.c_str());
-            return false;
-        }
-    }
-
-    return true;
-}

settings.h

@@ -1,156 +0,0 @@
-#ifndef SETTINGS_H
-#define SETTINGS_H
-
-#include <vector>
-
-#include "utils/floatpoint.h"
-
-#ifndef VERSION
-#define VERSION "DEV"
-#endif
-
-#define FIX_HORRIBLE_UNION_ALL_TYPE_A    0x01
-#define FIX_HORRIBLE_UNION_ALL_TYPE_B    0x02
-#define FIX_HORRIBLE_EXTENSIVE_STITCHING 0x04
-#define FIX_HORRIBLE_UNION_ALL_TYPE_C    0x08
-#define FIX_HORRIBLE_KEEP_NONE_CLOSED    0x10
-
-/**
- * Type of support material.
- * Grid is a X/Y grid with an outline, which is very strong, provides good support. But in some cases is hard to remove.
- * Lines give a row of lines which break off one at a time, making them easier to remove, but they do not support as good as the grid support.
- */
-#define SUPPORT_TYPE_GRID                0
-#define SUPPORT_TYPE_LINES               1
-
-#ifndef DEFAULT_CONFIG_PATH
-#define DEFAULT_CONFIG_PATH "default.cfg"
-#endif
-
-#define CONFIG_MULTILINE_SEPARATOR "\"\"\""
-
-/**
- * RepRap flavored GCode is Marlin/Sprinter/Repetier based GCode.
- *  This is the most commonly used GCode set.
- *  G0 for moves, G1 for extrusion.
- *  E values give mm of filament extrusion.
- *  Retraction is done on E values with G1. Start/end code is added.
- *  M106 Sxxx and M107 are used to turn the fan on/off.
- **/
-#define GCODE_FLAVOR_REPRAP              0
-/**
- * UltiGCode flavored is Marlin based GCode.
- *  UltiGCode uses less settings on the slicer and puts more settings in the firmware. This makes for more hardware/material independed GCode.
- *  G0 for moves, G1 for extrusion.
- *  E values give mm^3 of filament extrusion. Ignores the filament diameter setting.
- *  Retraction is done with G10 and G11. Retraction settings are ignored. G10 S1 is used for multi-extruder switch retraction.
- *  Start/end code is not added.
- *  M106 Sxxx and M107 are used to turn the fan on/off.
- **/
-#define GCODE_FLAVOR_ULTIGCODE           1
-/**
- * Makerbot flavored GCode.
- *  Looks a lot like RepRap GCode with a few changes. Requires MakerWare to convert to X3G files.
- *   Heating needs to be done with M104 Sxxx T0
- *   No G21 or G90
- *   Fan ON is M126 T0 (No fan strength control?)
- *   Fan OFF is M127 T0
- *   Homing is done with G162 X Y F2000
- **/
-#define GCODE_FLAVOR_MAKERBOT           2
-
-#define MAX_EXTRUDERS 16
-
-class _ConfigSettingIndex
-{
-public:
-    const char* key;
-    int* ptr;
-
-    _ConfigSettingIndex(const char* key, int* ptr) : key(key), ptr(ptr) {}
-};
-
-class ConfigSettings
-{
-private:
-    std::vector<_ConfigSettingIndex> _index;
-public:
-    int layerThickness;
-    int initialLayerThickness;
-    int filamentDiameter;
-    int filamentFlow;
-    int extrusionWidth;
-    int insetCount;
-    int downSkinCount;
-    int upSkinCount;
-    int sparseInfillLineDistance;
-    int infillOverlap;
-    int skirtDistance;
-    int skirtLineCount;
-    int skirtMinLength;
-
-    //Retraction settings
-    int retractionAmount;
-    int retractionAmountExtruderSwitch;
-    int retractionSpeed;
-    int retractionMinimalDistance;
-    int minimalExtrusionBeforeRetraction;
-    int retractionZHop;
-
-    int enableCombing;
-    int enableOozeShield;
-    int wipeTowerSize;
-    int multiVolumeOverlap;
-
-    int initialSpeedupLayers;
-    int initialLayerSpeed;
-    int printSpeed;
-    int infillSpeed;
-    int inset0Speed;
-    int insetXSpeed;
-    int moveSpeed;
-    int fanFullOnLayerNr;
-
-    //Support material
-    int supportType;
-    int supportAngle;
-    int supportEverywhere;
-    int supportLineDistance;
-    int supportXYDistance;
-    int supportZDistance;
-    int supportExtruder;
-
-    //Cool settings
-    int minimalLayerTime;
-    int minimalFeedrate;
-    int coolHeadLift;
-    int fanSpeedMin;
-    int fanSpeedMax;
-
-    //Raft settings
-    int raftMargin;
-    int raftLineSpacing;
-    int raftBaseThickness;
-    int raftBaseLinewidth;
-    int raftInterfaceThickness;
-    int raftInterfaceLinewidth;
-
-    FMatrix3x3 matrix;
-    IntPoint objectPosition;
-    int objectSink;
-
-    int fixHorrible;
-    int spiralizeMode;
-    int gcodeFlavor;
-
-    IntPoint extruderOffset[MAX_EXTRUDERS];
-    std::string startCode;
-    std::string endCode;
-
-    ConfigSettings();
-    bool setSetting(const char* key, const char* value);
-    bool readSettings(void);
-    bool readSettings(const char* path);
-};
-
-#endif//SETTINGS_H

skin.cpp

@@ -1,116 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "skin.h"
-
-void generateSkins(int layerNr, SliceVolumeStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount, int infillOverlap)
-{
-    SliceLayer* layer = &storage.layers[layerNr];
-
-    for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
-    {
-        SliceLayerPart* part = &layer->parts[partNr];
-        
-        Polygons upskin = part->insets[part->insets.size() - 1].offset(-extrusionWidth/2);
-        Polygons downskin = upskin;
-        
-        if (part->insets.size() > 1)
-        {
-            //Add thin wall filling by taking the area between the insets.
-            Polygons thinWalls = part->insets[0].offset(-extrusionWidth / 2 - extrusionWidth * infillOverlap / 100).difference(part->insets[1].offset(extrusionWidth * 6 / 10));
-            upskin.add(thinWalls);
-            downskin.add(thinWalls);
-        }
-        if (int(layerNr - downSkinCount) >= 0)
-        {
-            SliceLayer* layer2 = &storage.layers[layerNr - downSkinCount];
-            for(unsigned int partNr2=0; partNr2<layer2->parts.size(); partNr2++)
-            {
-                if (part->boundaryBox.hit(layer2->parts[partNr2].boundaryBox))
-                    downskin = downskin.difference(layer2->parts[partNr2].insets[layer2->parts[partNr2].insets.size() - 1]);
-            }
-        }
-        if (int(layerNr + upSkinCount) < (int)storage.layers.size())
-        {
-            SliceLayer* layer2 = &storage.layers[layerNr + upSkinCount];
-            for(unsigned int partNr2=0; partNr2<layer2->parts.size(); partNr2++)
-            {
-                if (part->boundaryBox.hit(layer2->parts[partNr2].boundaryBox))
-                    upskin = upskin.difference(layer2->parts[partNr2].insets[layer2->parts[partNr2].insets.size() - 1]);
-            }
-        }
-        
-        part->skinOutline = upskin.unionPolygons(downskin);
-
-        double minAreaSize = (2 * M_PI * INT2MM(extrusionWidth) * INT2MM(extrusionWidth)) * 0.3;
-        for(unsigned int i=0; i<part->skinOutline.size(); i++)
-        {
-            double area = INT2MM(INT2MM(fabs(part->skinOutline[i].area())));
-            if (area < minAreaSize) // Only create an up/down skin if the area is large enough. So you do not create tiny blobs of "trying to fill"
-            {
-                part->skinOutline.remove(i);
-                i -= 1;
-            }
-        }
-    }
-}
-
-void generateSparse(int layerNr, SliceVolumeStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount)
-{
-    SliceLayer* layer = &storage.layers[layerNr];
-
-    for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
-    {
-        SliceLayerPart* part = &layer->parts[partNr];
-
-        Polygons sparse = part->insets[part->insets.size() - 1].offset(-extrusionWidth/2);
-        Polygons downskin = sparse;
-        Polygons upskin = sparse;
-        
-        if (int(layerNr - downSkinCount) >= 0)
-        {
-            SliceLayer* layer2 = &storage.layers[layerNr - downSkinCount];
-            for(unsigned int partNr2=0; partNr2<layer2->parts.size(); partNr2++)
-            {
-                if (part->boundaryBox.hit(layer2->parts[partNr2].boundaryBox))
-                {
-                    if (layer2->parts[partNr2].insets.size() > 1)
-                    {
-                        downskin = downskin.difference(layer2->parts[partNr2].insets[layer2->parts[partNr2].insets.size() - 2]);
-                    }else{
-                        downskin = downskin.difference(layer2->parts[partNr2].insets[layer2->parts[partNr2].insets.size() - 1]);
-                    }
-                }
-            }
-        }
-        if (int(layerNr + upSkinCount) < (int)storage.layers.size())
-        {
-            SliceLayer* layer2 = &storage.layers[layerNr + upSkinCount];
-            for(unsigned int partNr2=0; partNr2<layer2->parts.size(); partNr2++)
-            {
-                if (part->boundaryBox.hit(layer2->parts[partNr2].boundaryBox))
-                {
-                    if (layer2->parts[partNr2].insets.size() > 1)
-                    {
-                        upskin = upskin.difference(layer2->parts[partNr2].insets[layer2->parts[partNr2].insets.size() - 2]);
-                    }else{
-                        upskin = upskin.difference(layer2->parts[partNr2].insets[layer2->parts[partNr2].insets.size() - 1]);
-                    }
-                }
-            }
-        }
-        
-        Polygons result = upskin.unionPolygons(downskin);
-
-        double minAreaSize = 3.0;//(2 * M_PI * INT2MM(config.extrusionWidth) * INT2MM(config.extrusionWidth)) * 3;
-        for(unsigned int i=0; i<result.size(); i++)
-        {
-            double area = INT2MM(INT2MM(fabs(result[i].area())));
-            if (area < minAreaSize) /* Only create an up/down skin if the area is large enough. So you do not create tiny blobs of "trying to fill" */
-            {
-                result.remove(i);
-                i -= 1;
-            }
-        }
-        
-        part->sparseOutline = sparse.difference(result);
-    }
-}

skin.h

@@ -1,10 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef SKIN_H
-#define SKIN_H
-
-#include "sliceDataStorage.h"
-
-void generateSkins(int layerNr, SliceVolumeStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount, int infillOverlap);
-void generateSparse(int layerNr, SliceVolumeStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount);
-
-#endif//SKIN_H

skirt.cpp

@@ -1,47 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "skirt.h"
-#include "support.h"
-
-void generateSkirt(SliceDataStorage& storage, int distance, int extrusionWidth, int count, int minLength, int initialLayerHeight)
-{
-    bool externalOnly = (distance > 0);
-    for(int skirtNr=0; skirtNr<count;skirtNr++)
-    {
-        int offsetDistance = distance + extrusionWidth * skirtNr + extrusionWidth / 2;
-        
-        Polygons skirtPolygons(storage.wipeTower.offset(offsetDistance));
-        for(unsigned int volumeIdx = 0; volumeIdx < storage.volumes.size(); volumeIdx++)
-        {
-            if (storage.volumes[volumeIdx].layers.size() < 1) continue;
-            SliceLayer* layer = &storage.volumes[volumeIdx].layers[0];
-            for(unsigned int i=0; i<layer->parts.size(); i++)
-            {
-                if (externalOnly)
-                {
-                    Polygons p;
-                    p.add(layer->parts[i].outline[0]);
-                    skirtPolygons = skirtPolygons.unionPolygons(p.offset(offsetDistance));
-                }
-                else
-                    skirtPolygons = skirtPolygons.unionPolygons(layer->parts[i].outline.offset(offsetDistance));
-            }
-        }
-        
-        SupportPolyGenerator supportGenerator(storage.support, initialLayerHeight);
-        skirtPolygons = skirtPolygons.unionPolygons(supportGenerator.polygons.offset(offsetDistance));
-
-        //Remove small inner skirt holes. Holes have a negative area, remove anything smaller then 100x extrusion "area"
-        for(unsigned int n=0; n<skirtPolygons.size(); n++)
-        {
-            double area = skirtPolygons[n].area();
-            if (area < 0 && area > -extrusionWidth * extrusionWidth * 100)
-                skirtPolygons.remove(n--);
-        }
-
-        storage.skirt.add(skirtPolygons);
-        
-        int lenght = storage.skirt.polygonLength();
-        if (skirtNr + 1 >= count && lenght > 0 && lenght < minLength)
-            count++;
-    }
-}

skirt.h

@@ -1,9 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef SKIRT_H
-#define SKIRT_H
-
-#include "sliceDataStorage.h"
-
-void generateSkirt(SliceDataStorage& storage, int distance, int extrusionWidth, int count, int minLength, int initialLayerHeight);
-
-#endif//SKIRT_H

sliceDataStorage.h

@@ -1,85 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef SLICE_DATA_STORAGE_H
-#define SLICE_DATA_STORAGE_H
-
-#include "utils/intpoint.h"
-#include "utils/polygon.h"
-
-/*
-SliceData
-+ Layers[]
-  + LayerParts[]
-    + OutlinePolygons[]
-    + Insets[]
-      + Polygons[]
-    + SkinPolygons[]
-*/
-
-class SliceLayerPart
-{
-public:
-    AABB boundaryBox;
-    Polygons outline;
-    Polygons combBoundery;
-    vector<Polygons> insets;
-    Polygons skinOutline;
-    Polygons sparseOutline;
-    int bridgeAngle;
-};
-
-class SliceLayer
-{
-public:
-    int sliceZ;
-    int printZ;
-    vector<SliceLayerPart> parts;
-};
-
-/******************/
-class SupportPoint
-{
-public:
-    int32_t z;
-    double cosAngle;
-    
-    SupportPoint(int32_t z, double cosAngle) : z(z), cosAngle(cosAngle) {}
-};
-class SupportStorage
-{
-public:
-    bool generated;
-    int angle;
-    bool everywhere;
-    int XYDistance;
-    int ZDistance;
-    
-    Point gridOffset;
-    int32_t gridScale;
-    int32_t gridWidth, gridHeight;
-    vector<SupportPoint>* grid;
-   	SupportStorage(){grid = NULL;}
-	  ~SupportStorage(){if(grid) delete [] grid;}
-};
-/******************/
-
-class SliceVolumeStorage
-{
-public:
-    vector<SliceLayer> layers;
-};
-
-class SliceDataStorage
-{
-public:
-    Point3 modelSize, modelMin, modelMax;
-    Polygons skirt;
-    Polygons raftOutline;               //Storage for the outline of the raft. Will be filled with lines when the GCode is generated.
-    vector<Polygons> oozeShield;        //oozeShield per layer
-    vector<SliceVolumeStorage> volumes;
-    
-    SupportStorage support;
-    Polygons wipeTower;
-    Point wipePoint;
-};
-
-#endif//SLICE_DATA_STORAGE_H

src/Weaver.cpp

@@ -0,0 +1,473 @@
+#include "Weaver.h"
+
+#include <cmath> // sqrt
+#include <fstream> // debug IO
+#include <unistd.h>
+
+#include "weaveDataStorage.h"
+
+namespace cura 
+{
+
+void Weaver::weave(PrintObject* object, CommandSocket* commandSocket)
+{
+    int maxz = object->max().z;
+
+    int layer_count = (maxz - initial_layer_thickness) / connectionHeight + 1;
+
+    DEBUG_SHOW(layer_count);
+
+    std::vector<cura::Slicer*> slicerList;
+
+    for(Mesh& mesh : object->meshes)
+    {
+        cura::Slicer* slicer = new cura::Slicer(&mesh, initial_layer_thickness, connectionHeight, layer_count, mesh.getSettingBoolean("meshfix_keep_open_polygons"), mesh.getSettingBoolean("meshfix_extensive_stitching"));
+        slicerList.push_back(slicer);
+    }
+
+    
+    int starting_layer_idx;
+    { // find first non-empty layer
+        for (starting_layer_idx = 0; starting_layer_idx < layer_count; starting_layer_idx++)
+        {
+            Polygons parts;
+            for (cura::Slicer* slicer : slicerList)
+                parts.add(slicer->layers[starting_layer_idx].polygonList);  
+            
+            if (parts.size() > 0)
+                break;
+        }
+        if (starting_layer_idx > 0)
+        {
+            logError("First %i layers are empty!\n", starting_layer_idx);
+        }
+    }
+    
+    
+    std::cerr<< "chainifying layers..." << std::endl;
+    {
+        int starting_z = -1;
+        for (cura::Slicer* slicer : slicerList)
+            wireFrame.bottom_outline.add(slicer->layers[starting_layer_idx].polygonList);
+        
+        if (commandSocket)
+            commandSocket->sendPolygons(Inset0Type, 0, wireFrame.bottom_outline, 1);
+        
+        wireFrame.z_bottom = slicerList[0]->layers[starting_layer_idx].z;
+        
+        Point starting_point_in_layer;
+        if (wireFrame.bottom_outline.size() > 0)
+            starting_point_in_layer = (wireFrame.bottom_outline.max() + wireFrame.bottom_outline.min()) / 2;
+        else 
+            starting_point_in_layer = (Point(0,0) + object->max() + object->min()) / 2;
+        
+        for (int layer_idx = starting_layer_idx + 1; layer_idx < layer_count; layer_idx++)
+        {
+            logProgress("inset", layer_idx+1, layer_count); // abuse the progress system of the normal mode of CuraEngine
+            
+            Polygons parts1;
+            for (cura::Slicer* slicer : slicerList)
+                parts1.add(slicer->layers[layer_idx].polygonList);
+
+            
+            Polygons chainified;
+
+            chainify_polygons(parts1, starting_point_in_layer, chainified, false);
+            
+            if (commandSocket)
+                commandSocket->sendPolygons(Inset0Type, layer_idx - starting_layer_idx, chainified, 1);
+            
+            if (chainified.size() > 0)
+            {
+                if (starting_z == -1) starting_z = slicerList[0]->layers[layer_idx-1].z;
+                wireFrame.layers.emplace_back();
+                WeaveLayer& layer = wireFrame.layers.back();
+                
+                layer.z0 = slicerList[0]->layers[layer_idx-1].z - starting_z;
+                layer.z1 = slicerList[0]->layers[layer_idx].z - starting_z;
+                
+                layer.supported = chainified;
+                
+                starting_point_in_layer = layer.supported.back().back();
+            }
+        }
+    }
+    
+    std::cerr<< "finding horizontal parts..." << std::endl;
+    {
+        Polygons* lower_top_parts = &wireFrame.bottom_outline;
+        
+        for (unsigned int layer_idx = 0; layer_idx < wireFrame.layers.size(); layer_idx++)
+        {
+            logProgress("skin", layer_idx+1, wireFrame.layers.size()); // abuse the progress system of the normal mode of CuraEngine
+            
+            WeaveLayer& layer = wireFrame.layers[layer_idx];
+            
+            Polygons empty;
+            Polygons& layer_above = (layer_idx+1 < wireFrame.layers.size())? wireFrame.layers[layer_idx+1].supported : empty;
+            
+            createHorizontalFill(*lower_top_parts, layer, layer_above, layer.z1);
+            lower_top_parts = &layer.supported;
+        }
+    }
+    // at this point layer.supported still only contains the polygons to be connected
+    // when connecting layers, we further add the supporting polygons created by the roofs
+    
+    std::cerr<< "connecting layers..." << std::endl;
+    {
+        Polygons* lower_top_parts = &wireFrame.bottom_outline;
+        int last_z = wireFrame.z_bottom;
+        for (unsigned int layer_idx = 0; layer_idx < wireFrame.layers.size(); layer_idx++) // use top of every layer but the last
+        {
+            WeaveLayer& layer = wireFrame.layers[layer_idx];
+            
+            connect_polygons(*lower_top_parts, last_z, layer.supported, layer.z1, layer);
+            layer.supported.add(layer.roofs.roof_outlines);
+            lower_top_parts = &layer.supported;
+            
+            last_z = layer.z1;
+        }
+    }
+
+
+    { // roofs:
+        
+        WeaveLayer& top_layer = wireFrame.layers.back();
+        Polygons to_be_supported; // empty for the top layer
+        fillRoofs(top_layer.supported, to_be_supported, -1, top_layer.z1, top_layer.roofs);
+    }
+    
+    
+    { // bottom:
+        Polygons to_be_supported; // is empty for the bottom layer, cause the order of insets doesn't really matter (in a sense everything is to be supported)
+        fillRoofs(wireFrame.bottom_outline, to_be_supported, -1, wireFrame.layers.front().z0, wireFrame.bottom_infill);
+    }
+    
+}
+
+
+
+void Weaver::createHorizontalFill(Polygons& lower_top_parts, WeaveLayer& layer, Polygons& layer_above, int z1)
+{
+    int64_t bridgable_dist = connectionHeight;
+    
+    Polygons& polys_below = lower_top_parts;
+    Polygons& polys_here = layer.supported;
+    Polygons& polys_above = layer_above;
+
+    
+    { // roofs
+        Polygons to_be_supported =  polys_above.offset(bridgable_dist);
+        fillRoofs(polys_here, to_be_supported, -1, layer.z1, layer.roofs);
+
+    }
+   
+    { // floors
+        Polygons to_be_supported =  polys_above.offset(-bridgable_dist);
+        fillFloors(polys_here, to_be_supported, 1, layer.z1, layer.roofs);
+    }
+    
+    {// optimize away doubly printed regions (boundaries of holes in layer etc.)
+        for (WeaveRoofPart& inset : layer.roofs.roof_insets)
+            connections2moves(inset);
+    }
+    
+}
+    
+
+void Weaver::fillRoofs(Polygons& supporting, Polygons& to_be_supported, int direction, int z, WeaveRoof& horizontals)
+{
+    std::vector<WeaveRoofPart>& insets = horizontals.roof_insets;
+    
+    if (supporting.size() == 0) return; // no parts to start the roof from!
+    
+    Polygons roofs = supporting.difference(to_be_supported);
+    
+    roofs = roofs.offset(-roof_inset).offset(roof_inset);
+    
+    if (roofs.size() == 0) return;
+    
+    
+    Polygons roof_outlines; 
+    Polygons roof_holes;
+    { // split roofs into outlines and holes
+        std::vector<Polygons> roof_parts = roofs.splitIntoParts();
+        for (Polygons& roof_part : roof_parts)
+        {
+            roof_outlines.add(roof_part[0]);
+            for (unsigned int hole_idx = 1; hole_idx < roof_part.size(); hole_idx++)
+            {
+                roof_holes.add(roof_part[hole_idx]);
+                roof_holes.back().reverse();
+            }
+        }
+    }
+
+    
+    Polygons supporting_outlines;
+    
+    std::vector<Polygons> supporting_parts = supporting.splitIntoParts();
+    for (Polygons& supporting_part : supporting_parts) 
+        supporting_outlines.add(supporting_part[0]); // only add outlines, not the holes
+    
+    
+    
+    Polygons inset1;
+    Polygons last_inset;
+    Polygons last_supported = supporting;
+    for (Polygons inset0 = supporting_outlines; inset0.size() > 0; inset0 = last_inset)
+    {
+        last_inset = inset0.offset(direction * roof_inset, ClipperLib::jtRound);
+        inset1 = last_inset.intersection(roof_outlines); // stay within roof area
+        inset1 = inset1.unionPolygons(roof_holes);// make insets go around holes
+
+        if (inset1.size() == 0) break;
+        
+        insets.emplace_back();
+        
+        connect(last_supported, z, inset1, z, insets.back(), true);
+        
+        inset1 = inset1.remove(roof_holes); // throw away holes which appear in every intersection
+        inset1 = inset1.remove(roof_outlines);// throw away fully filled regions
+        
+        last_supported = insets.back().supported; // chainified
+        
+    }
+    
+
+    
+    horizontals.roof_outlines.add(roofs); // TODO just add the new lines, not the lines of the roofs which are already supported ==> make outlines into a connection from which we only print the top, not the connection
+} 
+
+void Weaver::fillFloors(Polygons& supporting, Polygons& to_be_supported, int direction, int z, WeaveRoof& horizontals)
+{
+    std::vector<WeaveRoofPart>& outsets = horizontals.roof_insets;
+    
+    if (to_be_supported.size() == 0) return; // no parts to start the floor from!
+    if (supporting.size() == 0) return; // no parts to start the floor from!
+    
+    Polygons floors = to_be_supported.difference(supporting);
+    
+    floors = floors.offset(-roof_inset).offset(roof_inset);
+    
+    if (floors.size() == 0) return;
+    
+    
+    std::vector<Polygons> floor_parts = floors.splitIntoParts();
+    
+    Polygons floor_outlines;
+    Polygons floor_holes;
+    for (Polygons& floor_part : floor_parts)
+    {
+        floor_outlines.add(floor_part[0]);
+        for (unsigned int hole_idx = 1; hole_idx < floor_part.size(); hole_idx++)
+        {
+            floor_holes.add(floor_part[hole_idx]);
+            //floor_holes.back().reverse();
+        }
+    }
+    
+    
+    Polygons outset1;
+    
+    Polygons last_supported = supporting;
+    
+    for (Polygons outset0 = supporting; outset0.size() > 0; outset0 = outset1)
+    {
+        outset1 = outset0.offset(roof_inset * direction, ClipperLib::jtRound).intersection(floors);
+        outset1 = outset1.remove(floor_holes); // throw away holes which appear in every intersection
+        outset1 = outset1.remove(floor_outlines); // throw away holes which appear in every intersection
+        
+        
+        outsets.emplace_back();
+        
+        connect(last_supported, z, outset1, z, outsets.back(), true);
+        
+        outset1 = outset1.remove(floor_outlines);// throw away fully filled regions
+        
+        last_supported = outsets.back().supported; // chainified
+
+    }
+    
+    
+    horizontals.roof_outlines.add(floors);
+}
+
+
+void Weaver::connections2moves(WeaveRoofPart& inset)
+{
+    
+    
+    bool include_half_of_last_down = true;
+    
+    
+    for (WeaveConnectionPart& part : inset.connections)
+    {
+        std::vector<WeaveConnectionSegment>& segments = part.connection.segments;
+        for (unsigned int idx = 0; idx < part.connection.segments.size(); idx += 2)
+        {
+            WeaveConnectionSegment& segment = segments[idx];
+            assert(segment.segmentType == WeaveSegmentType::UP);
+            Point3 from = (idx == 0)? part.connection.from : segments[idx-1].to;
+            bool skipped = (segment.to - from).vSize2() < extrusionWidth * extrusionWidth;
+            if (skipped)
+            {
+                unsigned int begin = idx;
+                for (; idx < segments.size(); idx += 2)
+                {
+                    WeaveConnectionSegment& segment = segments[idx];
+                    assert(segments[idx].segmentType == WeaveSegmentType::UP);
+                    Point3 from = (idx == 0)? part.connection.from : segments[idx-1].to;
+                    bool skipped = (segment.to - from).vSize2() < extrusionWidth * extrusionWidth;
+                    if (!skipped) 
+                        break;
+                }
+                int end = idx - ((include_half_of_last_down)? 2 : 1);
+                if (idx >= segments.size())
+                    segments.erase(segments.begin() + begin, segments.end());
+                else 
+                {
+                    segments.erase(segments.begin() + begin, segments.begin() + end);
+                    if (begin < segments.size()) 
+                    {
+                        segments[begin].segmentType = WeaveSegmentType::MOVE;
+                        if (include_half_of_last_down)
+                            segments[begin+1].segmentType = WeaveSegmentType::DOWN_AND_FLAT;
+                    }
+                    idx = begin + ((include_half_of_last_down)? 2 : 1);
+                }
+            }
+        }
+    }
+}
+
+void Weaver::connect(Polygons& parts0, int z0, Polygons& parts1, int z1, WeaveConnection& result, bool include_last)
+{
+    // TODO: convert polygons (with outset + difference) such that after printing the first polygon, we can't be in the way of the printed stuff
+    // something like:
+    // for (m > n)
+    //     parts[m] = parts[m].difference(parts[n].offset(nozzle_top_diameter))
+    // according to the printing order!
+    //
+    // OR! : 
+    //
+    // unify different parts if gap is too small
+    
+    Polygons& supported = result.supported;
+    
+    if (parts1.size() == 0) return;
+    
+    Point& start_close_to = (parts0.size() > 0)? parts0.back().back() : parts1.back().back();
+    
+    chainify_polygons(parts1, start_close_to, supported, include_last);
+    
+    if (parts0.size() == 0) return;
+    
+    connect_polygons(parts0, z0, supported, z1, result);
+
+}
+
+
+void Weaver::chainify_polygons(Polygons& parts1, Point start_close_to, Polygons& result, bool include_last)
+{
+    
+        
+    for (unsigned int prt = 0 ; prt < parts1.size(); prt++)
+    {
+        const PolygonRef upperPart = parts1[prt];
+        
+        ClosestPolygonPoint closestInPoly = findClosest(start_close_to, upperPart);
+
+        
+        PolygonRef part_top = result.newPoly();
+        
+        GivenDistPoint next_upper;
+        bool found = true;
+        int idx = 0;
+        
+        for (Point upper_point = upperPart[closestInPoly.pos]; found; upper_point = next_upper.location)
+        {
+            found = getNextPointWithDistance(upper_point, nozzle_top_diameter, upperPart, idx, closestInPoly.pos, next_upper);
+
+            
+            if (!found) 
+            {
+                break;
+            }
+            
+            part_top.add(upper_point);
+            
+            idx = next_upper.pos;
+        }
+        if (part_top.size() > 0)
+            start_close_to = part_top.back();
+        else
+            result.remove(result.size()-1);
+    }
+}
+
+
+void Weaver::connect_polygons(Polygons& supporting, int z0, Polygons& supported, int z1, WeaveConnection& result)
+{
+ 
+    if (supporting.size() < 1)
+    {
+        DEBUG_PRINTLN("lower layer has zero parts!");
+        return;
+    }
+    
+    result.z0 = z0;
+    result.z1 = z1;
+    
+    std::vector<WeaveConnectionPart>& parts = result.connections;
+        
+    for (unsigned int prt = 0 ; prt < supported.size(); prt++)
+    {
+        
+        const PolygonRef upperPart = supported[prt];
+        
+        
+        parts.emplace_back(prt);
+        WeaveConnectionPart& part = parts.back();
+        PolyLine3& connection = part.connection;
+        
+        Point3 last_upper;
+        bool firstIter = true;
+        
+        for (const Point& upper_point : upperPart)
+        {
+            
+            ClosestPolygonPoint lowerPolyPoint = findClosest(upper_point, supporting);
+            Point& lower = lowerPolyPoint.location;
+            
+            Point3 lower3 = Point3(lower.X, lower.Y, z0);
+            Point3 upper3 = Point3(upper_point.X, upper_point.Y, z1);
+            
+            
+            if (firstIter)
+                connection.from = lower3;
+            else
+                connection.segments.emplace_back<>(lower3, WeaveSegmentType::DOWN);
+            
+            connection.segments.emplace_back<>(upper3, WeaveSegmentType::UP);
+            last_upper = upper3;
+            
+            firstIter = false;
+        }
+    }
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+} // namespace cura
+    

src/Weaver.h

@@ -0,0 +1,153 @@
+#ifndef WEAVER_H
+#define WEAVER_H
+
+#include "weaveDataStorage.h"
+#include "commandSocket.h"
+#include "settings.h"
+
+#include "modelFile/modelFile.h" // PrintObject
+#include "slicer.h"
+
+#include "utils/polygon.h"
+#include "utils/polygonUtils.h"
+
+#include "debug.h"
+
+namespace cura
+{
+
+/*!
+ * The main weaver / WirePrint / wireframe printing class, which computes the basic paths to be followed.
+ */
+class Weaver : public SettingsBase
+{
+    friend class Wireframe2gcode;
+private:
+    static const int HIGHER_BEND_NO_STRAIGHTEN = 0;
+    static const int MOVE_TO_STRAIGHTEN = 1;
+    static const int RETRACT_TO_STRAIGHTEN = 2;
+    
+    int initial_layer_thickness;
+    int connectionHeight; 
+    int extrusionWidth;
+    
+    int roof_inset; 
+    
+    int nozzle_outer_diameter; 
+    double nozzle_expansion_angle; 
+    int nozzle_clearance; 
+    int nozzle_top_diameter;
+   
+    
+public:
+    
+    Weaver(SettingsBase* settings_base) : SettingsBase(settings_base) 
+    {
+        
+        initial_layer_thickness = getSettingInMicrons("layer_height_0");
+        connectionHeight = getSettingInMicrons("wireframe_height"); 
+        
+        extrusionWidth = getSettingInMicrons("wall_line_width_x");
+        
+        roof_inset = getSettingInMicrons("wireframe_roof_inset"); 
+        nozzle_outer_diameter = getSettingInMicrons("machine_nozzle_tip_outer_diameter");      // ___       ___   .
+        nozzle_expansion_angle = getSettingInAngleRadians("machine_nozzle_expansion_angle");  //     \_U_/       .
+        nozzle_clearance = getSettingInMicrons("wireframe_nozzle_clearance");                // at least line width
+        nozzle_top_diameter = tan(nozzle_expansion_angle) * connectionHeight + nozzle_outer_diameter + nozzle_clearance;
+    }
+
+    /*!
+     * This is the main function for Neith / Weaving / WirePrinting / Webbed printing.
+     * Creates a wireframe for the model consisting of horizontal 'flat' parts and connections between consecutive flat parts consisting of UP moves and diagonally DOWN moves.
+     * 
+     * \param object The object for which to create a wireframe print
+     * \param commandSocket the commandSocket
+     */
+    void weave(PrintObject* object, CommandSocket* commandSocket);
+    
+
+private:
+    WireFrame wireFrame;
+    
+
+/*!
+ * Connect two polygons, chainify the second and generate connections from it, supporting on the first polygon.
+ * 
+ * \param supporting The polygons from which to start the connection
+ * \param z0 The height of the \p supporting
+ * \param supported The polygons to be supported by the connection from \p supporting to \p supported
+ * \param z1 the height of \p supported
+ * \param include_last Whether the last full link should be included in the chainified \p parts1 if the last link would be shorter than the normal link size.
+ */
+    void connect(Polygons& parts0, int z0, Polygons& parts1, int z1, WeaveConnection& result, bool include_last);
+
+/*!
+ * Convert polygons, such that they consist of segments/links of uniform size, namely \p nozzle_top_diameter.
+ * 
+ * \param parts1 The polygons to be chainified
+ * \param start_close_to The point from which to start the first link
+ * \param include_last governs whether the last segment is smaller or grater than the \p nozzle_top_diameter.
+ * If true, the last segment may be smaller.
+ */
+    void chainify_polygons(Polygons& parts1, Point start_close_to, Polygons& result, bool include_last);
+    
+/*!
+ * The main weaving function.
+ * Generate connections between two polygons.
+ * The connections consist of zig zags of which the zig is a line from a point in \p supported to the closest point in \p supporting 
+ * and the zag is a diagonal line from the same point in \p supported to a point in \p supporting 
+ * with a distance equal to Weaver::nozzle_top_diameter from the other point in \p supporting of the zig.
+ * 
+ * \param supporting The polygons from which to start the connection
+ * \param z0 The height of the \p supporting
+ * \param supported The polygons to be supported by the connection from \p supporting to \p supported
+ * \param z1 the height of \p supported
+ * \param result The resulting connection
+ */
+    void connect_polygons(Polygons& supporting, int z0, Polygons& supported, int z1, WeaveConnection& result);
+
+/*!
+ * Creates the roofs and floors which are laid down horizontally.
+ */
+    void createHorizontalFill(Polygons& lower_top_parts, WeaveLayer& layer, Polygons& layer_above, int z1);
+    
+/*!
+ * Fill roofs starting from the outlines of \p supporting.
+ * The area to be filled in is difference( \p to_be_supported , \p supporting ).
+ * 
+ * The basic algorithm performs insets on \p supported until the whole area of \p to_be_supported is filled.
+ * In order to not fill holes in the roof, the hole-areas are unioned with the insets, which results in connections where the UP move has close to zero length;
+ * pieces of the area between two consecutive insets have close to zero distance at these points.
+ * These parts of the horizontal infills are converted into moves by the function \p connections2moves.
+ * 
+ * Note that the new inset is computed from the last inset, while the connections are between the last chainified inset and the new chainified inset.
+ * 
+ */
+    void fillRoofs(Polygons& supporting, Polygons& to_be_supported, int direction, int z, WeaveRoof& roofs);
+    
+/*!
+ * Fill floors starting from the outlines of \p supporting.
+ * The area to be filled in is \p floors = difference( \p to_be_supported , \p supporting ).
+ * 
+ * The basic algorithm performs outsets until the whole area of [to_be_supported] is filled.
+ * In order to not fill too much, the outsets are intersected with the [floors] area, which results in connections where the UP move has close to zero length.
+ * These parts of the horizontal infills are converted into moves by the function [connections2moves].
+ * 
+ * The first supporting polygons are \p supporting while the supporting polygons in consecutive iterations are sub-areas of \p floors.
+ * 
+ * Note that the new outset is computed from the last outset, while the connections are between the last chainified outset and the new (chainified) outset.
+ * 
+ */
+    void fillFloors(Polygons& supporting, Polygons& to_be_supported, int direction, int z, WeaveRoof& roofs);
+    
+/*!
+ * Filter out parts of connections with small distances; replace by moves.
+ * 
+ */
+    void connections2moves(WeaveRoofPart& inset);
+   
+};
+
+}//namespace cura
+
+#endif//WEAVER_H

src/Wireframe2gcode.cpp

@@ -0,0 +1,555 @@
+#include "Wireframe2gcode.h"
+
+#include <cmath> // sqrt
+#include <fstream> // debug IO
+
+#include "weaveDataStorage.h"
+
+
+namespace cura 
+{
+
+
+void Wireframe2gcode::writeGCode(CommandSocket* commandSocket, int& maxObjectHeight)
+{
+
+    if (commandSocket)
+        commandSocket->beginGCode();
+    
+    maxObjectHeight = wireFrame.layers.back().z1;
+    
+    { // starting Gcode
+        if (hasSetting("material_bed_temperature") && getSettingInDegreeCelsius("material_bed_temperature") > 0)
+            gcode.writeBedTemperatureCommand(getSettingInDegreeCelsius("material_bed_temperature"), true);
+        if (hasSetting("material_print_temperature") && getSettingInDegreeCelsius("material_print_temperature") > 0)
+            gcode.writeTemperatureCommand(getSettingAsIndex("extruder_nr"), getSettingInDegreeCelsius("material_print_temperature"));
+        
+        gcode.writeCode(getSettingString("machine_start_gcode").c_str());
+        if (gcode.getFlavor() == GCODE_FLAVOR_BFB)
+        {
+            gcode.writeComment("enable auto-retraction");
+            std::ostringstream tmp;
+            tmp << "M227 S" << (getSettingInMicrons("retraction_amount") * 2560 / 1000) << " P" << (getSettingInMicrons("retraction_amount") * 2560 / 1000);  // TODO: put hard coded value in a variable with an explanatory name (and make var a parameter, and perhaps even a setting?)
+            gcode.writeLine(tmp.str().c_str());
+        }
+    }
+    
+    
+            
+    unsigned int totalLayers = wireFrame.layers.size();
+    gcode.writeLayerComment(0);
+    gcode.writeTypeComment("SKIRT");
+
+    gcode.setZ(initial_layer_thickness);
+    
+    for (PolygonRef bottom_part : wireFrame.bottom_infill.roof_outlines)
+    {
+        if (bottom_part.size() == 0) continue;
+        writeMoveWithRetract(bottom_part[bottom_part.size()-1]);
+        for (Point& segment_to : bottom_part)
+        {
+            gcode.writeMove(segment_to, speedBottom, extrusion_per_mm_flat);
+        }
+    }
+    
+    
+    
+    // bottom:
+    Polygons empty_outlines;
+    writeFill(wireFrame.bottom_infill.roof_insets, empty_outlines, 
+              [this](Wireframe2gcode& thiss, WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx) { 
+                    WeaveConnectionSegment& segment = part.connection.segments[segment_idx]; 
+                    if (segment.segmentType == WeaveSegmentType::MOVE || segment.segmentType == WeaveSegmentType::DOWN_AND_FLAT) // this is the case when an inset overlaps with a hole 
+                    {
+                        writeMoveWithRetract(segment.to); 
+                    } else 
+                    {
+                        gcode.writeMove(segment.to, speedBottom, extrusion_per_mm_connection); 
+                    }
+                }   
+            , 
+              [this](Wireframe2gcode& thiss, WeaveConnectionSegment& segment) { 
+                    if (segment.segmentType == WeaveSegmentType::MOVE)
+                        writeMoveWithRetract(segment.to);
+                    else if (segment.segmentType == WeaveSegmentType::DOWN_AND_FLAT)
+                        return; // do nothing
+                    else 
+                        gcode.writeMove(segment.to, speedBottom, extrusion_per_mm_flat); 
+                }
+            );
+    
+    for (unsigned int layer_nr = 0; layer_nr < wireFrame.layers.size(); layer_nr++)
+    {
+        
+        logProgress("export", layer_nr+1, totalLayers); // abuse the progress system of the normal mode of CuraEngine
+        if (commandSocket) commandSocket->sendProgress(2.0/3.0 + 1.0/3.0 * float(layer_nr) / float(totalLayers));
+        
+        WeaveLayer& layer = wireFrame.layers[layer_nr];
+        
+        gcode.writeLayerComment(layer_nr+1);
+        
+        int fanSpeed = getSettingInPercentage("cool_fan_speed_max");
+        if (layer_nr == 0)
+            fanSpeed = getSettingInPercentage("cool_fan_speed_min");
+        gcode.writeFanCommand(fanSpeed);
+        
+        for (unsigned int part_nr = 0; part_nr < layer.connections.size(); part_nr++)
+        {
+            WeaveConnectionPart& part = layer.connections[part_nr];
+       
+            if (part.connection.segments.size() == 0) continue;
+            
+            gcode.writeTypeComment("SUPPORT"); // connection
+            {
+                if (vSize2(gcode.getPositionXY() - part.connection.from) > connectionHeight)
+                {
+                    Point3 point_same_height(part.connection.from.x, part.connection.from.y, layer.z1+100);
+                    writeMoveWithRetract(point_same_height);
+                }
+                writeMoveWithRetract(part.connection.from);
+                for (unsigned int segment_idx = 0; segment_idx < part.connection.segments.size(); segment_idx++)
+                {
+                    handle_segment(layer, part, segment_idx);
+                }
+            }
+            
+            
+            
+            gcode.writeTypeComment("WALL-OUTER"); // top
+            {
+                for (unsigned int segment_idx = 0; segment_idx < part.connection.segments.size(); segment_idx++)
+                {
+                    WeaveConnectionSegment& segment = part.connection.segments[segment_idx];
+                    if (segment.segmentType == WeaveSegmentType::DOWN) continue;
+                    if (segment.segmentType == WeaveSegmentType::MOVE) 
+                    {
+                        writeMoveWithRetract(segment.to);
+                    } else 
+                    {
+                        gcode.writeMove(segment.to, speedFlat, extrusion_per_mm_flat);
+                        gcode.writeDelay(flat_delay);
+                    }
+                }
+            }
+        }
+        
+        // roofs:
+        gcode.setZ(layer.z1);
+        std::function<void (Wireframe2gcode& thiss, WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx)>
+            handle_roof = &Wireframe2gcode::handle_roof_segment;
+        writeFill(layer.roofs.roof_insets, layer.roofs.roof_outlines,
+                  handle_roof,
+                [this](Wireframe2gcode& thiss, WeaveConnectionSegment& segment) { // handle flat segments
+                    if (segment.segmentType == WeaveSegmentType::MOVE)
+                    {
+                        writeMoveWithRetract(segment.to);
+                    } else if (segment.segmentType == WeaveSegmentType::DOWN_AND_FLAT)
+                    {
+                        // do nothing
+                    } else 
+                    {   
+                        gcode.writeMove(segment.to, speedFlat, extrusion_per_mm_flat);
+                        gcode.writeDelay(flat_delay);
+                    }
+                });
+        
+     
+        
+    }
+    
+    gcode.setZ(maxObjectHeight);
+    
+    gcode.writeRetraction(&standard_retraction_config);
+    
+    
+    gcode.updateTotalPrintTime();
+    
+    gcode.writeDelay(0.3);
+    
+    gcode.writeFanCommand(0);
+
+    if (commandSocket)
+    {
+        gcode.finalize(maxObjectHeight, getSettingInMillimetersPerSecond("speed_travel"), getSettingString("machine_end_gcode").c_str());
+        for(int e=0; e<MAX_EXTRUDERS; e++)
+            gcode.writeTemperatureCommand(e, 0, false);
+
+        commandSocket->sendGCodeLayer();
+        commandSocket->endSendSlicedObject();
+    }
+}
+
+    
+void Wireframe2gcode::go_down(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx) 
+{ 
+    WeaveConnectionSegment& segment = part.connection.segments[segment_idx];
+    Point3 from = (segment_idx == 0)? part.connection.from : part.connection.segments[segment_idx - 1].to;
+    if (go_back_to_last_top)
+        gcode.writeMove(from, speedDown, 0);
+    if (straight_first_when_going_down <= 0)
+    {
+        gcode.writeMove(segment.to, speedDown, extrusion_per_mm_connection);
+    } else 
+    {
+        Point3& to = segment.to;
+        Point3 from = gcode.getPosition();// segment.from;
+        Point3 vec = to - from;
+        Point3 in_between = from + vec * straight_first_when_going_down / 100;
+        
+        Point3 up(in_between.x, in_between.y, from.z);
+        int64_t new_length = (up - from).vSize() + (to - up).vSize() + 5;
+        int64_t orr_length = vec.vSize();
+        double enlargement = new_length / orr_length;
+        gcode.writeMove(up, speedDown*enlargement, extrusion_per_mm_connection / enlargement);
+        gcode.writeMove(to, speedDown*enlargement, extrusion_per_mm_connection / enlargement);
+    }
+    gcode.writeDelay(bottom_delay);
+    if (up_dist_half_speed > 0)
+    {
+        
+        gcode.writeMove(Point3(0,0,up_dist_half_speed) + gcode.getPosition(), speedUp / 2, extrusion_per_mm_connection * 2);
+    }
+}
+
+
+    
+void Wireframe2gcode::strategy_knot(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx)
+{
+    WeaveConnectionSegment& segment = part.connection.segments[segment_idx];
+    gcode.writeMove(segment.to, speedUp, extrusion_per_mm_connection);
+    Point3 next_vector;
+    if (segment_idx + 1 < part.connection.segments.size())
+    {
+        WeaveConnectionSegment& next_segment = part.connection.segments[segment_idx+1];
+        next_vector = next_segment.to - segment.to;
+    } else
+    {
+        next_vector = part.connection.segments[0].to - segment.to;
+    }
+    Point next_dir_2D(next_vector.x, next_vector.y);
+    next_dir_2D = next_dir_2D * top_jump_dist / vSize(next_dir_2D);
+    Point3 next_dir (next_dir_2D.X / 2, next_dir_2D.Y / 2, -top_jump_dist);
+    
+    Point3 current_pos = gcode.getPosition();
+    
+    gcode.writeMove(current_pos - next_dir, speedUp, 0);
+    gcode.writeDelay(top_delay);
+    gcode.writeMove(current_pos + next_dir_2D, speedUp, 0);
+}
+
+void Wireframe2gcode::strategy_retract(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx)
+{
+    WeaveConnectionSegment& segment = part.connection.segments[segment_idx];
+    Point3 from = (segment_idx == 0)? part.connection.from : part.connection.segments[segment_idx - 1].to;
+    
+    RetractionConfig retraction_config;
+    // TODO: get these from the settings!
+    retraction_config.amount = 500; //INT2MM(getSettingInt("retractionAmount"))
+    retraction_config.primeAmount = 0;//INT2MM(getSettingInt("retractionPrime
+    retraction_config.speed = 20; // 40;
+    retraction_config.primeSpeed = 15; // 30;
+    retraction_config.zHop = 0; //getSettingInt("retraction_hop");
+
+    double top_retract_pause = 2.0;
+    int retract_hop_dist = 1000;
+    bool after_retract_hop = false;
+    //bool go_horizontal_first = true;
+    bool lower_retract_start = true;
+    
+    
+    Point3& to = segment.to;
+    if (lower_retract_start)
+    {
+        Point3 vec = to - from;
+        Point3 lowering = vec * retract_hop_dist / 2 / vec.vSize();
+        Point3 lower = to - lowering;
+        gcode.writeMove(lower, speedUp, extrusion_per_mm_connection);
+        gcode.writeRetraction(&retraction_config);
+        gcode.writeMove(to + lowering, speedUp, 0);
+        gcode.writeDelay(top_retract_pause);
+        if (after_retract_hop)
+            gcode.writeMove(to + Point3(0, 0, retract_hop_dist), speedFlat, 0);
+        
+    } else 
+    {
+        gcode.writeMove(to, speedUp, extrusion_per_mm_connection);
+        gcode.writeRetraction(&retraction_config);
+        gcode.writeMove(to + Point3(0, 0, retract_hop_dist), speedFlat, 0);
+        gcode.writeDelay(top_retract_pause);
+        if (after_retract_hop)    
+            gcode.writeMove(to + Point3(0, 0, retract_hop_dist*3), speedFlat, 0);
+        }
+}
+
+void Wireframe2gcode::strategy_compensate(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx)
+{
+    WeaveConnectionSegment& segment = part.connection.segments[segment_idx];
+    Point3 from = (segment_idx == 0)? part.connection.from : part.connection.segments[segment_idx - 1].to;
+    Point3 to = segment.to + Point3(0, 0, fall_down*(segment.to - from).vSize() / connectionHeight);
+    Point3 vector = segment.to - from;
+    Point3 dir = vector * drag_along / vector.vSize();
+    
+    Point3 next_point;
+    if (segment_idx + 1 < part.connection.segments.size())
+    {
+        WeaveConnectionSegment& next_segment = part.connection.segments[segment_idx+1];
+        next_point = next_segment.to;
+    } else
+    {
+        next_point = part.connection.segments[0].to;
+    }
+    Point3 next_vector = next_point - segment.to;
+    Point next_dir_2D(next_vector.x, next_vector.y);
+    int64_t next_dir_2D_size = vSize(next_dir_2D);
+    if (next_dir_2D_size > 0)
+        next_dir_2D = next_dir_2D * drag_along / next_dir_2D_size;
+    Point3 next_dir (next_dir_2D.X, next_dir_2D.Y, 0);
+    
+    Point3 newTop = to - next_dir + dir;
+    
+    int64_t orrLength = (segment.to - from).vSize() + next_vector.vSize() + 1; // + 1 in order to avoid division by zero
+    int64_t newLength = (newTop - from).vSize() + (next_point - newTop).vSize() + 1; // + 1 in order to avoid division by zero
+    
+    gcode.writeMove(newTop, speedUp * newLength / orrLength, extrusion_per_mm_connection * orrLength / newLength);
+}
+void Wireframe2gcode::handle_segment(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx) 
+{
+    WeaveConnectionSegment& segment = part.connection.segments[segment_idx];
+    
+    switch(segment.segmentType)
+    {
+        case WeaveSegmentType::MOVE:
+            writeMoveWithRetract(segment.to);
+            break;
+        case WeaveSegmentType::DOWN:
+            go_down(layer, part, segment_idx);
+            break;
+        case WeaveSegmentType::FLAT:
+            DEBUG_SHOW("flat piece in connection?!!?!");
+            break;
+        case WeaveSegmentType::UP:
+            if (strategy == STRATEGY_KNOT)
+            {
+                strategy_knot(layer, part, segment_idx);
+            } else if (strategy == STRATEGY_RETRACT)
+            { 
+                strategy_retract(layer, part, segment_idx);
+            } else if (strategy == STRATEGY_COMPENSATE)
+            {
+                strategy_compensate(layer, part, segment_idx);
+            }
+            break;
+        case WeaveSegmentType::DOWN_AND_FLAT:
+            logError("Down and flat move in non-horizontal connection!");
+            break;
+    }
+}
+
+
+
+
+void Wireframe2gcode::handle_roof_segment(WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx)
+{
+    WeaveConnectionSegment& segment = part.connection.segments[segment_idx];
+    Point3 from = (segment_idx == 0)? part.connection.from : part.connection.segments[segment_idx - 1].to;
+    WeaveConnectionSegment* next_segment = nullptr;
+    if (segment_idx + 1 < part.connection.segments.size())
+        next_segment = &part.connection.segments[segment_idx+1];
+    switch(segment.segmentType)
+    {
+        case WeaveSegmentType::MOVE:
+        case WeaveSegmentType::DOWN_AND_FLAT:
+            if (next_segment && next_segment->segmentType != WeaveSegmentType::DOWN_AND_FLAT)
+            {
+                writeMoveWithRetract(segment.to);
+            }
+            break;
+        case WeaveSegmentType::UP:
+            {
+                Point3 to = segment.to + Point3(0, 0, roof_fall_down);
+                
+                Point3 vector = segment.to - from;
+                if (vector.vSize2() == 0) return;
+                Point3 dir = vector * roof_drag_along / vector.vSize();
+                
+                Point3 next_vector;
+                if (next_segment)
+                {
+                    next_vector = next_segment->to - segment.to;
+                } else
+                {
+                    next_vector = part.connection.segments[0].to - segment.to;
+                }
+                Point next_dir_2D(next_vector.x, next_vector.y);
+                Point3 detoured = to + dir;
+                if (vSize2(next_dir_2D) > 0) 
+                {
+                    next_dir_2D = next_dir_2D * roof_drag_along / vSize(next_dir_2D);
+                    Point3 next_dir (next_dir_2D.X, next_dir_2D.Y, 0);
+                    detoured -= next_dir;
+                }
+                
+                gcode.writeMove(detoured, speedUp, extrusion_per_mm_connection);
+
+            }
+            break;
+        case WeaveSegmentType::DOWN:
+            gcode.writeMove(segment.to, speedDown, extrusion_per_mm_connection);
+            gcode.writeDelay(roof_outer_delay);
+            break;
+        case WeaveSegmentType::FLAT:
+            logError("Flat move in connection!");
+            break;
+    }
+
+}
+
+
+
+void Wireframe2gcode::writeFill(std::vector<WeaveRoofPart>& fill_insets, Polygons& roof_outlines
+    , std::function<void (Wireframe2gcode& thiss, WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx)> connectionHandler
+    , std::function<void (Wireframe2gcode& thiss, WeaveConnectionSegment& p)> flatHandler)
+{
+        
+    // bottom:
+    gcode.writeTypeComment("FILL");
+    for (unsigned int inset_idx = 0; inset_idx < fill_insets.size(); inset_idx++)
+    {
+        WeaveRoofPart& inset = fill_insets[inset_idx];
+        
+        
+        for (unsigned int inset_part_nr = 0; inset_part_nr < inset.connections.size(); inset_part_nr++)
+        {
+            WeaveConnectionPart& inset_part = inset.connections[inset_part_nr];
+            std::vector<WeaveConnectionSegment>& segments = inset_part.connection.segments;
+            
+            gcode.writeTypeComment("SUPPORT"); // connection
+            if (segments.size() == 0) continue;
+            Point3 first_extrusion_from = inset_part.connection.from;
+            unsigned int first_segment_idx;
+            for (first_segment_idx = 0; first_segment_idx < segments.size() && segments[first_segment_idx].segmentType == WeaveSegmentType::MOVE; first_segment_idx++)
+            { // finds the first segment which is not a move
+                first_extrusion_from = segments[first_segment_idx].to;
+            }
+            if (first_segment_idx == segments.size())
+                continue;
+            writeMoveWithRetract(first_extrusion_from);
+            for (unsigned int segment_idx = first_segment_idx; segment_idx < segments.size(); segment_idx++)
+            {
+                connectionHandler(*this, inset, inset_part, segment_idx);
+            }
+            
+            gcode.writeTypeComment("WALL-INNER"); // top
+            for (unsigned int segment_idx = 0; segment_idx < segments.size(); segment_idx++)
+            {
+                WeaveConnectionSegment& segment = segments[segment_idx];
+
+                if (segment.segmentType == WeaveSegmentType::DOWN) continue;
+
+                flatHandler(*this, segment); 
+            }
+        }
+        
+        
+    }
+    
+    gcode.writeTypeComment("WALL-OUTER"); // outer perimeter of the flat parts
+    for (PolygonRef poly : roof_outlines)
+    {
+        writeMoveWithRetract(poly[poly.size() - 1]);
+        for (Point& p : poly)
+        {
+            Point3 to(p.X, p.Y, gcode.getPositionZ());
+            WeaveConnectionSegment segment(to, WeaveSegmentType::FLAT);
+            flatHandler(*this, segment); 
+        }
+    }
+}
+
+
+
+
+void Wireframe2gcode::writeMoveWithRetract(Point3 to)
+{
+    if ((gcode.getPosition() - to).vSize2() >= nozzle_top_diameter * nozzle_top_diameter * 2 * 2)
+        gcode.writeRetraction(&standard_retraction_config);
+    gcode.writeMove(to, moveSpeed, 0);
+}
+
+void Wireframe2gcode::writeMoveWithRetract(Point to)
+{
+    if (vSize2(gcode.getPositionXY() - to) >= nozzle_top_diameter * nozzle_top_diameter * 2 * 2)
+        gcode.writeRetraction(&standard_retraction_config);
+    gcode.writeMove(to, moveSpeed, 0);
+}
+
+Wireframe2gcode::Wireframe2gcode(Weaver& weaver, GCodeExport& gcode, SettingsBase* settings_base) 
+: SettingsBase(settings_base) 
+, gcode(gcode)
+{
+    wireFrame = weaver.wireFrame;
+    initial_layer_thickness = getSettingInMicrons("layer_height_0");
+    connectionHeight = getSettingInMicrons("wireframe_height"); 
+    roof_inset = getSettingInMicrons("wireframe_roof_inset"); 
+    
+    filament_diameter = getSettingInMicrons("material_diameter");
+    extrusionWidth = getSettingInMicrons("wall_line_width_x");
+    
+    flowConnection = getSettingInPercentage("wireframe_flow_connection");
+    flowFlat = getSettingInPercentage("wireframe_flow_flat");
+    
+    double filament_area = /* M_PI * */ (INT2MM(filament_diameter) / 2.0) * (INT2MM(filament_diameter) / 2.0);
+    double lineArea = /* M_PI * */ (INT2MM(extrusionWidth) / 2.0) * (INT2MM(extrusionWidth) / 2.0);
+    extrusion_per_mm_connection = lineArea / filament_area * double(flowConnection) / 100.0;
+    extrusion_per_mm_flat = lineArea / filament_area * double(flowFlat) / 100.0;
+    
+    nozzle_outer_diameter = getSettingInMicrons("machine_nozzle_tip_outer_diameter"); // ___       ___   .
+    nozzle_head_distance = getSettingInMicrons("machine_nozzle_head_distance");      //    |     |      .
+    nozzle_expansion_angle = getSettingInAngleRadians("machine_nozzle_expansion_angle");  //     \_U_/       .
+    nozzle_clearance = getSettingInMicrons("wireframe_nozzle_clearance");    // at least line width
+    nozzle_top_diameter = tan(nozzle_expansion_angle) * connectionHeight + nozzle_outer_diameter + nozzle_clearance;
+    
+    moveSpeed = 40;
+    speedBottom =  getSettingInMillimetersPerSecond("wireframe_printspeed_bottom");
+    speedUp = getSettingInMillimetersPerSecond("wireframe_printspeed_up");
+    speedDown = getSettingInMillimetersPerSecond("wireframe_printspeed_down");
+    speedFlat = getSettingInMillimetersPerSecond("wireframe_printspeed_flat");
+
+    flat_delay = getSettingInSeconds("wireframe_flat_delay");
+    bottom_delay = getSettingInSeconds("wireframe_bottom_delay");
+    top_delay = getSettingInSeconds("wireframe_top_delay");
+    
+    up_dist_half_speed = getSettingInMicrons("wireframe_up_half_speed");
+    
+    top_jump_dist = getSettingInMicrons("wireframe_top_jump");
+    
+    fall_down = getSettingInMicrons("wireframe_fall_down");
+    drag_along = getSettingInMicrons("wireframe_drag_along");
+    
+    strategy = STRATEGY_COMPENSATE;
+    if (getSettingString("wireframe_strategy") == "Compensate")
+        strategy = STRATEGY_COMPENSATE;
+    if (getSettingString("wireframe_strategy") == "Knot")
+        strategy = STRATEGY_KNOT;
+    if (getSettingString("wireframe_strategy") == "Retract")
+        strategy = STRATEGY_RETRACT;
+    
+    go_back_to_last_top = false;
+    straight_first_when_going_down = getSettingInPercentage("wireframe_straight_before_down");
+    
+    roof_fall_down = getSettingInMicrons("wireframe_roof_fall_down");
+    roof_drag_along = getSettingInMicrons("wireframe_roof_drag_along");
+    roof_outer_delay = getSettingInSeconds("wireframe_roof_outer_delay");
+    
+    
+    standard_retraction_config.amount = INT2MM(getSettingInMicrons("retraction_amount"));
+    standard_retraction_config.primeAmount = INT2MM(getSettingInMicrons("retraction_extra_prime_amount"));
+    standard_retraction_config.speed = getSettingInMillimetersPerSecond("retraction_retract_speed");
+    standard_retraction_config.primeSpeed = getSettingInMillimetersPerSecond("retraction_prime_speed");
+    standard_retraction_config.zHop = getSettingInMicrons("retraction_hop");
+
+
+}
+
+
+} // namespace cura    

src/Wireframe2gcode.h

@@ -0,0 +1,155 @@
+#ifndef WIREFRAME2GCODE_H
+#define WIREFRAME2GCODE_H
+
+
+#include <functional> // passing function pointer or lambda as argument to a function
+
+#include "weaveDataStorage.h"
+#include "commandSocket.h"
+#include "settings.h"
+
+#include "modelFile/modelFile.h" // PrintObject
+#include "slicer.h"
+
+#include "utils/polygon.h"
+#include "Weaver.h"
+
+#include "debug.h"
+
+namespace cura
+{
+
+/*!
+ * Export class for exporting wireframe print gcode / weaver gcode / wireprint gcode.
+ */
+class Wireframe2gcode : public SettingsBase
+{
+private:
+    static const int STRATEGY_COMPENSATE = 0;
+    static const int STRATEGY_KNOT = 1;
+    static const int STRATEGY_RETRACT = 2;
+    
+    int initial_layer_thickness;
+    int filament_diameter;
+    int extrusionWidth;
+    int flowConnection;// = getSettingInt("wireframeFlowConnection");
+    int flowFlat; // = getSettingInt("wireframeFlowFlat");
+    double extrusion_per_mm_connection; // = lineArea / filament_area * double(flowConnection) / 100.0;
+    double extrusion_per_mm_flat; // = lineArea / filament_area * double(flowFlat) / 100.0;
+    int nozzle_outer_diameter; // = getSettingInt("machineNozzleTipOuterDiameter"); // ___       ___   .
+    int nozzle_head_distance; // = getSettingInt("machineNozzleHeadDistance");      //    |     |      .
+    int nozzle_expansion_angle; // = getSettingInt("machineNozzleExpansionAngle");  //     \_U_/       .
+    int nozzle_clearance; // = getSettingInt("wireframeNozzleClearance");    // at least line width
+    int nozzle_top_diameter; // = tan(static_cast<double>(nozzle_expansion_angle)/180.0 * M_PI) * connectionHeight + nozzle_outer_diameter + nozzle_clearance;
+    int moveSpeed; // = 40;
+    int speedBottom; // =  getSettingInt("wireframePrintspeedBottom");
+    int speedUp; // = getSettingInt("wireframePrintspeedUp");
+    int speedDown; // = getSettingInt("wireframePrintspeedDown");
+    int speedFlat; // = getSettingInt("wireframePrintspeedFlat");
+    int connectionHeight; // = getSettingInt("wireframeConnectionHeight"); 
+    int roof_inset; // = getSettingInt("wireframeRoofInset"); 
+    double flat_delay; // = getSettingInt("wireframeFlatDelay")/100.0;
+    double bottom_delay; // = getSettingInt("wireframeBottomDelay")/100.0;
+    double top_delay; // = getSettingInt("wireframeTopDelay")/100.0;
+    int up_dist_half_speed; // = getSettingInt("wireframeUpDistHalfSpeed");
+    int top_jump_dist; // = getSettingInt("wireframeTopJump");
+    int fall_down; // = getSettingInt("wireframeFallDown");
+    int drag_along; // = getSettingInt("wireframeDragAlong");
+    int strategy; // = getSettingInt("wireframeStrategy"); //  HIGHER_BEND_NO_STRAIGHTEN; // RETRACT_TO_STRAIGHTEN; // MOVE_TO_STRAIGHTEN; // 
+    double go_back_to_last_top; // = false;
+    int straight_first_when_going_down; // = getSettingInt("wireframeStraightBeforeDown"); // %
+    int roof_fall_down; // = getSettingInt("wireframeRoofFallDown");
+    int roof_drag_along; // = getSettingInt("wireframeRoofDragAlong");
+    double roof_outer_delay; // = getSettingInt("wireframeRoofOuterDelay")/100.0;
+    
+    RetractionConfig standard_retraction_config; //!< The standard retraction settings used for moves between parts etc.
+    
+public:
+    GCodeExport& gcode; //!< Where the result is 'stored'
+    
+    Wireframe2gcode(Weaver& weaver, GCodeExport& gcode, SettingsBase* settings_base);
+    
+    void writeGCode(CommandSocket* commandSocket, int& maxObjectHeight);
+
+
+private:
+    WireFrame wireFrame;
+    
+    void writeFill(std::vector<WeaveRoofPart>& fill_insets, Polygons& outlines
+        , std::function<void (Wireframe2gcode& thiss, WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx)> connectionHandler
+        , std::function<void (Wireframe2gcode& thiss, WeaveConnectionSegment& p)> flatHandler);
+    
+    /*!
+     * Function for writing the gcode for a diagonally down movement of a connection.
+     * 
+     * \param layer The layer in which the segment is
+     * \param part The part in which the segment is
+     * \param segment_idx The index of the segment in the \p part
+     */
+    void go_down(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx);
+    
+    /*!
+     * Function for writing the gcode of an upward move of a connection, which does a couple of small moves at the top.
+     * 
+     * \param layer The layer in which the segment is
+     * \param part The part in which the segment is
+     * \param segment_idx The index of the segment in the \p part
+     */
+    void strategy_knot(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx);
+    
+    /*!
+     * Function for writing the gcode of an upward move of a connection, which does a retract at the top.
+     * 
+     * \param layer The layer in which the segment is
+     * \param part The part in which the segment is
+     * \param segment_idx The index of the segment in the \p part
+     */
+    void strategy_retract(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx);
+    
+    /*!
+     * Function for writing the gcode of an upward move of a connection, which goes Wireframe2gcode::fall_down further up 
+     * and Wireframe2gcode::drag_along back from the direction it will go to next.
+     * 
+     * \param layer The layer in which the segment is
+     * \param part The part in which the segment is
+     * \param segment_idx The index of the segment in the \p part
+     */
+    void strategy_compensate(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx);
+    
+    /*!
+     * Function writing the gcode of a segment in the connection between two layers.
+     * 
+     * \param layer The layer in which the segment is
+     * \param part The part in which the segment is
+     * \param segment_idx The index of the segment in the \p part
+     */
+    void handle_segment(WeaveLayer& layer, WeaveConnectionPart& part, unsigned int segment_idx);
+    
+    /*!
+     * Function for writing the gcode of a segment in the connection between two roof insets / floor outsets.
+     * 
+     * \param inset The inset in which the segment is
+     * \param part the part in which the segment is
+     * \param segment_idx The index of the segment in the \p part
+     */
+    void handle_roof_segment(WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx);
+    
+    /*!
+     * Write a move action to gcode, inserting a retraction if neccesary.
+     * 
+     * \param to The 3D destination of the move
+     */
+    void writeMoveWithRetract(Point3 to);
+    
+    /*!
+     * Write a move action to gcode, inserting a retraction if neccesary.
+     * 
+     * \param to The 2D destination of the move
+     */
+    void writeMoveWithRetract(Point to);
+
+};
+
+}//namespace cura
+
+#endif//WIREFRAME2GCODE_H

src/bridge.cpp

@@ -1,56 +1,59 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "bridge.h"
-#include "utils/polygondebug.h"
-
-int bridgeAngle(SliceLayerPart* part, SliceLayer* prevLayer)
-{
-    //To detect if we have a bridge, first calculate the intersection of the current layer with the previous layer.
-    // This gives us the islands that the layer rests on.
-    Polygons islands;
-    for(unsigned int n=0; n<prevLayer->parts.size(); n++)
-    {
-        if (!part->boundaryBox.hit(prevLayer->parts[n].boundaryBox)) continue;
-        
-        islands.add(part->outline.intersection(prevLayer->parts[n].outline));
-    }
-    if (islands.size() > 5)
-        return -1;
-    
-    //Next find the 2 largest islands that we rest on.
-    double area1 = 0;
-    double area2 = 0;
-    int idx1 = -1;
-    int idx2 = -1;
-    for(unsigned int n=0; n<islands.size(); n++)
-    {
-        //Skip internal holes
-        if (!islands[n].orientation())
-            continue;
-        double area = fabs(islands[n].area());
-        if (area > area1)
-        {
-            if (area1 > area2)
-            {
-                area2 = area1;
-                idx2 = idx1;
-            }
-            area1 = area;
-            idx1 = n;
-        }else if (area > area2)
-        {
-            area2 = area;
-            idx2 = n;
-        }
-    }
-    
-    if (idx1 < 0 || idx2 < 0)
-        return -1;
-    
-    Point center1 = islands[idx1].centerOfMass();
-    Point center2 = islands[idx2].centerOfMass();
-    
-    double angle = atan2(center2.X - center1.X, center2.Y - center1.Y) / M_PI * 180;
-    if (angle < 0) angle += 360;
-    return angle;
-}
-
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include "bridge.h"
+
+namespace cura {
+
+int bridgeAngle(Polygons outline, SliceLayer* prevLayer)
+{
+    AABB boundaryBox(outline);
+    //To detect if we have a bridge, first calculate the intersection of the current layer with the previous layer.
+    // This gives us the islands that the layer rests on.
+    Polygons islands;
+    for(auto prevLayerPart : prevLayer->parts)
+    {
+        if (!boundaryBox.hit(prevLayerPart.boundaryBox))
+            continue;
+        
+        islands.add(outline.intersection(prevLayerPart.outline));
+    }
+    if (islands.size() > 5 || islands.size() < 1)
+        return -1;
+    
+    //Next find the 2 largest islands that we rest on.
+    double area1 = 0;
+    double area2 = 0;
+    int idx1 = -1;
+    int idx2 = -1;
+    for(unsigned int n=0; n<islands.size(); n++)
+    {
+        //Skip internal holes
+        if (!islands[n].orientation())
+            continue;
+        double area = fabs(islands[n].area());
+        if (area > area1)
+        {
+            if (area1 > area2)
+            {
+                area2 = area1;
+                idx2 = idx1;
+            }
+            area1 = area;
+            idx1 = n;
+        }else if (area > area2)
+        {
+            area2 = area;
+            idx2 = n;
+        }
+    }
+    
+    if (idx1 < 0 || idx2 < 0)
+        return -1;
+    
+    Point center1 = islands[idx1].centerOfMass();
+    Point center2 = islands[idx2].centerOfMass();
+
+    return angle(center2 - center1);
+}
+
+}//namespace cura
+

src/bridge.h

@@ -1,9 +1,13 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef BRIDGE_H
-#define BRIDGE_H
-
-#include "sliceDataStorage.h"
-
-int bridgeAngle(SliceLayerPart* part, SliceLayer* prevLayer);
-
-#endif//BRIDGE_H
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef BRIDGE_H
+#define BRIDGE_H
+
+#include "sliceDataStorage.h"
+
+namespace cura {
+
+int bridgeAngle(Polygons outline, SliceLayer* prevLayer);
+
+}//namespace cura
+
+#endif//BRIDGE_H

src/comb.cpp

@@ -1,256 +1,237 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "comb.h"
-
-bool Comb::preTest(Point startPoint, Point endPoint)
-{
-    return collisionTest(startPoint, endPoint);
-}
-
-bool Comb::collisionTest(Point startPoint, Point endPoint)
-{
-    Point diff = endPoint - startPoint;
-
-    matrix = PointMatrix(diff);
-    sp = matrix.apply(startPoint);
-    ep = matrix.apply(endPoint);
-    
-    for(unsigned int n=0; n<boundery.size(); n++)
-    {
-        if (boundery[n].size() < 1)
-            continue;
-        Point p0 = matrix.apply(boundery[n][boundery[n].size()-1]);
-        for(unsigned int i=0; i<boundery[n].size(); i++)
-        {
-            Point p1 = matrix.apply(boundery[n][i]);
-            if ((p0.Y > sp.Y && p1.Y < sp.Y) || (p1.Y > sp.Y && p0.Y < sp.Y))
-            {
-                int64_t x = p0.X + (p1.X - p0.X) * (sp.Y - p0.Y) / (p1.Y - p0.Y);
-                
-                if (x > sp.X && x < ep.X)
-                    return true;
-            }
-            p0 = p1;
-        }
-    }
-    return false;
-}
-
-void Comb::calcMinMax()
-{
-    for(unsigned int n=0; n<boundery.size(); n++)
-    {
-        minX[n] = LLONG_MAX;
-        maxX[n] = LLONG_MIN;
-        Point p0 = matrix.apply(boundery[n][boundery[n].size()-1]);
-        for(unsigned int i=0; i<boundery[n].size(); i++)
-        {
-            Point p1 = matrix.apply(boundery[n][i]);
-            if ((p0.Y > sp.Y && p1.Y < sp.Y) || (p1.Y > sp.Y && p0.Y < sp.Y))
-            {
-                int64_t x = p0.X + (p1.X - p0.X) * (sp.Y - p0.Y) / (p1.Y - p0.Y);
-                
-                if (x >= sp.X && x <= ep.X)
-                {
-                    if (x < minX[n]) { minX[n] = x; minIdx[n] = i; }
-                    if (x > maxX[n]) { maxX[n] = x; maxIdx[n] = i; }
-                }
-            }
-            p0 = p1;
-        }
-    }
-}
-
-unsigned int Comb::getPolygonAbove(int64_t x)
-{
-    int64_t min = LLONG_MAX;
-    unsigned int ret = UINT_MAX;
-    for(unsigned int n=0; n<boundery.size(); n++)
-    {
-        if (minX[n] > x && minX[n] < min)
-        {
-            min = minX[n];
-            ret = n;
-        }
-    }
-    return ret;
-}
-
-Point Comb::getBounderyPointWithOffset(unsigned int polygonNr, unsigned int idx)
-{
-    Point p0 = boundery[polygonNr][(idx > 0) ? (idx - 1) : (boundery[polygonNr].size() - 1)];
-    Point p1 = boundery[polygonNr][idx];
-    Point p2 = boundery[polygonNr][(idx < (boundery[polygonNr].size() - 1)) ? (idx + 1) : (0)];
-    
-    Point off0 = crossZ(normal(p1 - p0, MM2INT(1.0)));
-    Point off1 = crossZ(normal(p2 - p1, MM2INT(1.0)));
-    Point n = normal(off0 + off1, MM2INT(0.2));
-    
-    return p1 + n;
-}
-
-Comb::Comb(Polygons& _boundery)
-: boundery(_boundery)
-{
-    minX = new int64_t[boundery.size()];
-    maxX = new int64_t[boundery.size()];
-    minIdx = new unsigned int[boundery.size()];
-    maxIdx = new unsigned int[boundery.size()];
-}
-
-Comb::~Comb()
-{
-    delete[] minX;
-    delete[] maxX;
-    delete[] minIdx;
-    delete[] maxIdx;
-}
-
-bool Comb::checkInside(Point p)
-{
-    //Check if we are inside the comb boundary. We do this by tracing from the point towards the negative X direction,
-    //  every boundary we cross increments the crossings counter. If we have an even number of crossings then we are not inside the boundary
-    int crossings = 0;
-    for(unsigned int n=0; n<boundery.size(); n++)
-    {
-        if (boundery[n].size() < 1)
-            continue;
-        Point p0 = boundery[n][boundery[n].size()-1];
-        for(unsigned int i=0; i<boundery[n].size(); i++)
-        {
-            Point p1 = boundery[n][i];
-            
-            if ((p0.Y >= p.Y && p1.Y < p.Y) || (p1.Y > p.Y && p0.Y <= p.Y))
-            {
-                int64_t x = p0.X + (p1.X - p0.X) * (p.Y - p0.Y) / (p1.Y - p0.Y);
-                if (x >= p.X)
-                    crossings ++;
-            }
-            p0 = p1;
-        }
-    }
-    if ((crossings % 2) == 0)
-        return false;
-    return true;
-}
-
-bool Comb::moveInside(Point* p, int distance)
-{
-    Point ret = *p;
-    int64_t bestDist = MM2INT(2.0) * MM2INT(2.0);
-    for(unsigned int n=0; n<boundery.size(); n++)
-    {
-        if (boundery[n].size() < 1)
-            continue;
-        Point p0 = boundery[n][boundery[n].size()-1];
-        for(unsigned int i=0; i<boundery[n].size(); i++)
-        {
-            Point p1 = boundery[n][i];
-            
-            //Q = A + Normal( B - A ) * ((( B - A ) dot ( P - A )) / VSize( A - B ));
-            Point pDiff = p1 - p0;
-            int64_t lineLength = vSize(pDiff);
-            int64_t distOnLine = dot(pDiff, *p - p0) / lineLength;
-            if (distOnLine < 10)
-                distOnLine = 10;
-            if (distOnLine > lineLength - 10)
-                distOnLine = lineLength - 10;
-            Point q = p0 + pDiff * distOnLine / lineLength;
-            
-            int64_t dist = vSize2(q - *p);
-            if (dist < bestDist)
-            {
-                bestDist = dist;
-                ret = q + crossZ(normal(p1 - p0, distance));
-            }
-            
-            p0 = p1;
-        }
-    }
-    if (bestDist < MM2INT(2.0) * MM2INT(2.0))
-    {
-        *p = ret;
-        return true;
-    }
-    return false;
-}
-
-bool Comb::calc(Point startPoint, Point endPoint, vector<Point>& combPoints)
-{
-    if (shorterThen(endPoint - startPoint, MM2INT(1.5)))
-        return true;
-    
-    bool addEndpoint = false;
-    //Check if we are inside the comb boundaries
-    if (!checkInside(startPoint))
-    {
-        if (!moveInside(&startPoint))    //If we fail to move the point inside the comb boundary we need to retract.
-            return false;
-        combPoints.push_back(startPoint);
-    }
-    if (!checkInside(endPoint))
-    {
-        if (!moveInside(&endPoint))    //If we fail to move the point inside the comb boundary we need to retract.
-            return false;
-        addEndpoint = true;
-    }
-    
-    //Check if we are crossing any bounderies, and pre-calculate some values.
-    if (!preTest(startPoint, endPoint))
-    {
-        //We're not crossing any boundaries. So skip the comb generation.
-        if (!addEndpoint && combPoints.size() == 0) //Only skip if we didn't move the start and end point.
-            return true;
-    }
-    
-    //Calculate the minimum and maximum positions where we cross the comb boundary
-    calcMinMax();
-    
-    int64_t x = sp.X;
-    vector<Point> pointList;
-    //Now walk trough the crossings, for every boundary we cross, find the initial cross point and the exit point. Then add all the points in between
-    // to the pointList and continue with the next boundary we will cross, until there are no more boundaries to cross.
-    // This gives a path from the start to finish curved around the holes that it encounters.
-    while(true)
-    {
-        unsigned int n = getPolygonAbove(x);
-        if (n == UINT_MAX) break;
-        
-        pointList.push_back(matrix.unapply(Point(minX[n] - MM2INT(0.2), sp.Y)));
-        if ( (minIdx[n] - maxIdx[n] + boundery[n].size()) % boundery[n].size() > (maxIdx[n] - minIdx[n] + boundery[n].size()) % boundery[n].size())
-        {
-            for(unsigned int i=minIdx[n]; i != maxIdx[n]; i = (i < boundery[n].size() - 1) ? (i + 1) : (0))
-            {
-                pointList.push_back(getBounderyPointWithOffset(n, i));
-            }
-        }else{
-            minIdx[n]--;
-            if (minIdx[n] == UINT_MAX) minIdx[n] = boundery[n].size() - 1;
-            maxIdx[n]--;
-            if (maxIdx[n] == UINT_MAX) maxIdx[n] = boundery[n].size() - 1;
-            for(unsigned int i=minIdx[n]; i != maxIdx[n]; i = (i > 0) ? (i - 1) : (boundery[n].size() - 1))
-            {
-                pointList.push_back(getBounderyPointWithOffset(n, i));
-            }
-        }
-        pointList.push_back(matrix.unapply(Point(maxX[n] + MM2INT(0.2), sp.Y)));
-        
-        x = maxX[n];
-    }
-    pointList.push_back(endPoint);
-    
-    //Optimize the pointList, skip each point we could already reach by not crossing a boundary. This smooths out the path and makes it skip any unneeded corners.
-    Point p0 = startPoint;
-    for(unsigned int n=1; n<pointList.size(); n++)
-    {
-        if (collisionTest(p0, pointList[n]))
-        {
-            if (collisionTest(p0, pointList[n-1]))
-                return false;
-            p0 = pointList[n-1];
-            combPoints.push_back(p0);
-        }
-    }
-    if (addEndpoint)
-        combPoints.push_back(endPoint);
-    return true;
-}
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include "comb.h"
+
+namespace cura {
+
+bool Comb::preTest(Point startPoint, Point endPoint)
+{
+    return collisionTest(startPoint, endPoint);
+}
+
+bool Comb::collisionTest(Point startPoint, Point endPoint)
+{
+    Point diff = endPoint - startPoint;
+
+    matrix = PointMatrix(diff);
+    sp = matrix.apply(startPoint);
+    ep = matrix.apply(endPoint);
+    
+    for(unsigned int n=0; n<boundery.size(); n++)
+    {
+        if (boundery[n].size() < 1)
+            continue;
+        Point p0 = matrix.apply(boundery[n][boundery[n].size()-1]);
+        for(unsigned int i=0; i<boundery[n].size(); i++)
+        {
+            Point p1 = matrix.apply(boundery[n][i]);
+            if ((p0.Y > sp.Y && p1.Y < sp.Y) || (p1.Y > sp.Y && p0.Y < sp.Y))
+            {
+                int64_t x = p0.X + (p1.X - p0.X) * (sp.Y - p0.Y) / (p1.Y - p0.Y);
+                
+                if (x > sp.X && x < ep.X)
+                    return true;
+            }
+            p0 = p1;
+        }
+    }
+    return false;
+}
+
+void Comb::calcMinMax()
+{
+    for(unsigned int n=0; n<boundery.size(); n++)
+    {
+        minX[n] = INT64_MAX;
+        maxX[n] = INT64_MIN;
+        Point p0 = matrix.apply(boundery[n][boundery[n].size()-1]);
+        for(unsigned int i=0; i<boundery[n].size(); i++)
+        {
+            Point p1 = matrix.apply(boundery[n][i]);
+            if ((p0.Y > sp.Y && p1.Y < sp.Y) || (p1.Y > sp.Y && p0.Y < sp.Y))
+            {
+                int64_t x = p0.X + (p1.X - p0.X) * (sp.Y - p0.Y) / (p1.Y - p0.Y);
+                
+                if (x >= sp.X && x <= ep.X)
+                {
+                    if (x < minX[n]) { minX[n] = x; minIdx[n] = i; }
+                    if (x > maxX[n]) { maxX[n] = x; maxIdx[n] = i; }
+                }
+            }
+            p0 = p1;
+        }
+    }
+}
+
+unsigned int Comb::getPolygonAbove(int64_t x)
+{
+    int64_t min = POINT_MAX;
+    unsigned int ret = NO_INDEX;
+    for(unsigned int n=0; n<boundery.size(); n++)
+    {
+        if (minX[n] > x && minX[n] < min)
+        {
+            min = minX[n];
+            ret = n;
+        }
+    }
+    return ret;
+}
+
+Point Comb::getBounderyPointWithOffset(unsigned int polygonNr, unsigned int idx)
+{
+    Point p0 = boundery[polygonNr][(idx > 0) ? (idx - 1) : (boundery[polygonNr].size() - 1)];
+    Point p1 = boundery[polygonNr][idx];
+    Point p2 = boundery[polygonNr][(idx < (boundery[polygonNr].size() - 1)) ? (idx + 1) : (0)];
+    
+    Point off0 = crossZ(normal(p1 - p0, MM2INT(1.0)));
+    Point off1 = crossZ(normal(p2 - p1, MM2INT(1.0)));
+    Point n = normal(off0 + off1, MM2INT(0.2));
+    
+    return p1 + n;
+}
+
+Comb::Comb(Polygons& _boundery)
+: boundery(_boundery)
+{
+    minX = new int64_t[boundery.size()];
+    maxX = new int64_t[boundery.size()];
+    minIdx = new unsigned int[boundery.size()];
+    maxIdx = new unsigned int[boundery.size()];
+}
+
+Comb::~Comb()
+{
+    delete[] minX;
+    delete[] maxX;
+    delete[] minIdx;
+    delete[] maxIdx;
+}
+
+bool Comb::moveInside(Point* p, int distance)
+{
+    Point ret = *p;
+    int64_t bestDist = MM2INT(2.0) * MM2INT(2.0);
+    for(unsigned int n=0; n<boundery.size(); n++)
+    {
+        if (boundery[n].size() < 1)
+            continue;
+        Point p0 = boundery[n][boundery[n].size()-1];
+        for(unsigned int i=0; i<boundery[n].size(); i++)
+        {
+            Point p1 = boundery[n][i];
+            
+            //Q = A + Normal( B - A ) * ((( B - A ) dot ( P - A )) / VSize( A - B ));
+            Point pDiff = p1 - p0;
+            int64_t lineLength = vSize(pDiff);
+            int64_t distOnLine = dot(pDiff, *p - p0) / lineLength;
+            if (distOnLine < 10)
+                distOnLine = 10;
+            if (distOnLine > lineLength - 10)
+                distOnLine = lineLength - 10;
+            Point q = p0 + pDiff * distOnLine / lineLength;
+            
+            int64_t dist = vSize2(q - *p);
+            if (dist < bestDist)
+            {
+                bestDist = dist;
+                ret = q + crossZ(normal(p1 - p0, distance));
+            }
+            
+            p0 = p1;
+        }
+    }
+    if (bestDist < MM2INT(2.0) * MM2INT(2.0))
+    {
+        *p = ret;
+        return true;
+    }
+    return false;
+}
+
+bool Comb::calc(Point startPoint, Point endPoint, std::vector<Point>& combPoints)
+{
+    if (shorterThen(endPoint - startPoint, MM2INT(1.5)))
+        return true;
+    
+    bool addEndpoint = false;
+    //Check if we are inside the comb boundaries
+    if (!boundery.inside(startPoint))
+    {
+        if (!moveInside(&startPoint))    //If we fail to move the point inside the comb boundary we need to retract.
+            return false;
+        combPoints.push_back(startPoint);
+    }
+    if (!boundery.inside(endPoint))
+    {
+        if (!moveInside(&endPoint))    //If we fail to move the point inside the comb boundary we need to retract.
+            return false;
+        addEndpoint = true;
+    }
+    
+    //Check if we are crossing any bounderies, and pre-calculate some values.
+    if (!preTest(startPoint, endPoint))
+    {
+        //We're not crossing any boundaries. So skip the comb generation.
+        if (!addEndpoint && combPoints.size() == 0) //Only skip if we didn't move the start and end point.
+            return true;
+    }
+    
+    //Calculate the minimum and maximum positions where we cross the comb boundary
+    calcMinMax();
+    
+    int64_t x = sp.X;
+    std::vector<Point> pointList;
+    //Now walk trough the crossings, for every boundary we cross, find the initial cross point and the exit point. Then add all the points in between
+    // to the pointList and continue with the next boundary we will cross, until there are no more boundaries to cross.
+    // This gives a path from the start to finish curved around the holes that it encounters.
+    while(true)
+    {
+        unsigned int n = getPolygonAbove(x);
+        if (n == NO_INDEX) break;
+        
+        pointList.push_back(matrix.unapply(Point(minX[n] - MM2INT(0.2), sp.Y)));
+        if ( (minIdx[n] - maxIdx[n] + boundery[n].size()) % boundery[n].size() > (maxIdx[n] - minIdx[n] + boundery[n].size()) % boundery[n].size())
+        {
+            for(unsigned int i=minIdx[n]; i != maxIdx[n]; i = (i < boundery[n].size() - 1) ? (i + 1) : (0))
+            {
+                pointList.push_back(getBounderyPointWithOffset(n, i));
+            }
+        }else{
+            if (minIdx[n] == 0)
+                minIdx[n] = boundery[n].size() - 1;
+            else
+                minIdx[n]--;
+            if (maxIdx[n] == 0)
+                maxIdx[n] = boundery[n].size() - 1;
+            else
+                maxIdx[n]--;
+            
+            for(unsigned int i=minIdx[n]; i != maxIdx[n]; i = (i > 0) ? (i - 1) : (boundery[n].size() - 1))
+            {
+                pointList.push_back(getBounderyPointWithOffset(n, i));
+            }
+        }
+        pointList.push_back(matrix.unapply(Point(maxX[n] + MM2INT(0.2), sp.Y)));
+        
+        x = maxX[n];
+    }
+    pointList.push_back(endPoint);
+    
+    //Optimize the pointList, skip each point we could already reach by not crossing a boundary. This smooths out the path and makes it skip any unneeded corners.
+    Point p0 = startPoint;
+    for(unsigned int n=1; n<pointList.size(); n++)
+    {
+        if (collisionTest(p0, pointList[n]))
+        {
+            if (collisionTest(p0, pointList[n-1]))
+                return false;
+            p0 = pointList[n-1];
+            combPoints.push_back(p0);
+        }
+    }
+    if (addEndpoint)
+        combPoints.push_back(endPoint);
+    return true;
+}
+
+}//namespace cura

src/comb.h

@@ -1,41 +1,44 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef COMB_H
-#define COMB_H
-
-#include "utils/polygon.h"
-
-class Comb
-{
-private:
-    Polygons& boundery;
-
-    int64_t* minX;
-    int64_t* maxX;
-    unsigned int* minIdx;
-    unsigned int* maxIdx;
-
-    PointMatrix matrix;
-    Point sp;
-    Point ep;
-
-    bool preTest(Point startPoint, Point endPoint);    
-    bool collisionTest(Point startPoint, Point endPoint);
-
-    void calcMinMax();
-    
-    unsigned int getPolygonAbove(int64_t x);
-    
-    Point getBounderyPointWithOffset(unsigned int polygonNr, unsigned int idx);
-    
-public:
-    Comb(Polygons& _boundery);
-    ~Comb();
-    
-    bool checkInside(Point p);
-
-    bool moveInside(Point* p, int distance = 100);
-    
-    bool calc(Point startPoint, Point endPoint, vector<Point>& combPoints);
-};
-
-#endif//COMB_H
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef COMB_H
+#define COMB_H
+
+#include "utils/polygon.h"
+
+namespace cura {
+
+class Comb
+{
+private:
+    Polygons& boundery;
+
+    int64_t* minX;
+    int64_t* maxX;
+    unsigned int* minIdx;
+    unsigned int* maxIdx;
+
+    PointMatrix matrix;
+    Point sp;
+    Point ep;
+
+    bool preTest(Point startPoint, Point endPoint);    
+    bool collisionTest(Point startPoint, Point endPoint);
+
+    void calcMinMax();
+    
+    unsigned int getPolygonAbove(int64_t x);
+    
+    Point getBounderyPointWithOffset(unsigned int polygonNr, unsigned int idx);
+    
+public:
+    Comb(Polygons& _boundery);
+    ~Comb();
+    
+    bool inside(const Point p) { return boundery.inside(p); }
+    bool moveInside(Point* p, int distance = 100);
+    
+    bool calc(Point startPoint, Point endPoint, std::vector<Point>& combPoints);
+};
+
+}//namespace cura
+
+#endif//COMB_H

src/commandSocket.cpp

@@ -0,0 +1,274 @@
+#include "utils/logoutput.h"
+#include "commandSocket.h"
+#include "fffProcessor.h"
+
+#include <thread>
+#include <cinttypes>
+
+#include <Arcus/Socket.h>
+
+#ifdef _WIN32
+#include <windows.h>
+#endif
+
+namespace cura {
+
+#define BYTES_PER_FLOAT 4
+#define FLOATS_PER_VECTOR 3
+#define VECTORS_PER_FACE 3
+
+class CommandSocket::Private
+{
+public:
+    Private()
+        : processor(nullptr)
+        , socket(nullptr)
+        , object_count(0)
+        , current_object_number(0)
+        , currentSlicedObject(nullptr)
+        , slicedObjects(0)
+    { }
+
+    Cura::Layer* getLayerById(int id);
+
+    fffProcessor* processor;
+
+    Arcus::Socket* socket;
+
+    int object_count;
+    int current_object_number;
+
+    std::shared_ptr<Cura::SlicedObjectList> slicedObjectList;
+    Cura::SlicedObject* currentSlicedObject;
+    int slicedObjects;
+    std::vector<int64_t> objectIds;
+
+    std::string tempGCodeFile;
+    std::ostringstream gcode_output_stream;
+
+    std::shared_ptr<PrintObject> objectToSlice;
+};
+
+CommandSocket::CommandSocket(fffProcessor* processor)
+    : d(new Private)
+{
+    d->processor = processor;
+    d->processor->setCommandSocket(this);
+}
+
+void CommandSocket::connect(const std::string& ip, int port)
+{
+    d->socket = new Arcus::Socket();
+    d->socket->registerMessageType(1, &Cura::ObjectList::default_instance());
+    d->socket->registerMessageType(2, &Cura::SlicedObjectList::default_instance());
+    d->socket->registerMessageType(3, &Cura::Progress::default_instance());
+    d->socket->registerMessageType(4, &Cura::GCodeLayer::default_instance());
+    d->socket->registerMessageType(5, &Cura::ObjectPrintTime::default_instance());
+    d->socket->registerMessageType(6, &Cura::SettingList::default_instance());
+    d->socket->registerMessageType(7, &Cura::GCodePrefix::default_instance());
+
+    d->socket->connect(ip, port);
+
+    while(d->socket->state() != Arcus::SocketState::Closed && d->socket->state() != Arcus::SocketState::Error)
+    {
+        if(d->objectToSlice)
+        {
+            //TODO: Support all-at-once/one-at-a-time printing
+            d->processor->processModel(d->objectToSlice.get());
+            d->objectToSlice.reset();
+            d->processor->resetFileNumber();
+
+            sendPrintTime();
+        }
+
+        Arcus::MessagePtr message = d->socket->takeNextMessage();
+
+        Cura::SettingList* settingList = dynamic_cast<Cura::SettingList*>(message.get());
+        if(settingList)
+        {
+            handleSettingList(settingList);
+        }
+
+        Cura::ObjectList* objectList = dynamic_cast<Cura::ObjectList*>(message.get());
+        if(objectList)
+        {
+            handleObjectList(objectList);
+        }
+
+        std::this_thread::sleep_for(std::chrono::milliseconds(250));
+
+        if(!d->socket->errorString().empty()) {
+            logError("%s\n", d->socket->errorString().data());
+            d->socket->clearError();
+        }
+    }
+}
+
+void CommandSocket::handleObjectList(Cura::ObjectList* list)
+{
+    FMatrix3x3 matrix;
+    d->object_count = 0;
+    d->objectIds.clear();
+
+    d->objectToSlice = std::make_shared<PrintObject>(d->processor);
+    for(auto object : list->objects())
+    {
+        d->objectToSlice->meshes.emplace_back(d->objectToSlice.get()); //Construct a new mesh and put it into printObject's mesh list.
+        Mesh& mesh = d->objectToSlice->meshes.back();
+
+        int bytesPerFace = BYTES_PER_FLOAT * FLOATS_PER_VECTOR * VECTORS_PER_FACE;
+        int faceCount = object.vertices().size() / bytesPerFace;
+        for(int i = 0; i < faceCount; ++i)
+        {
+            //TODO: Apply matrix
+            std::string data = object.vertices().substr(i * bytesPerFace, bytesPerFace);
+            const FPoint3* floatVerts = reinterpret_cast<const FPoint3*>(data.data());
+
+            Point3 verts[3];
+            verts[0] = matrix.apply(floatVerts[0]);
+            verts[1] = matrix.apply(floatVerts[1]);
+            verts[2] = matrix.apply(floatVerts[2]);
+            mesh.addFace(verts[0], verts[1], verts[2]);
+        }
+
+        for(auto setting : object.settings())
+        {
+            mesh.setSetting(setting.name(), setting.value());
+        }
+
+        d->objectIds.push_back(object.id());
+        mesh.finish();
+    }
+    d->object_count++;
+    d->objectToSlice->finalize();
+}
+
+void CommandSocket::handleSettingList(Cura::SettingList* list)
+{
+    for(auto setting : list->settings())
+    {
+        d->processor->setSetting(setting.name(), setting.value());
+    }
+}
+
+void CommandSocket::sendLayerInfo(int layer_nr, int32_t z, int32_t height)
+{
+    if(!d->currentSlicedObject)
+    {
+        return;
+    }
+
+    Cura::Layer* layer = d->getLayerById(layer_nr);
+    layer->set_height(z);
+    layer->set_thickness(height);
+}
+
+void CommandSocket::sendPolygons(PolygonType type, int layer_nr, Polygons& polygons, int line_width)
+{
+    if(!d->currentSlicedObject)
+        return;
+    
+    if (polygons.size() == 0)
+        return;
+
+    Cura::Layer* layer = d->getLayerById(layer_nr);
+
+    for(unsigned int i = 0; i < polygons.size(); ++i)
+    {
+        Cura::Polygon* p = layer->add_polygons();
+        p->set_type(static_cast<Cura::Polygon_Type>(type));
+        std::string polydata;
+        polydata.append(reinterpret_cast<const char*>(polygons[i].data()), polygons[i].size() * sizeof(Point));
+        p->set_points(polydata);
+        p->set_line_width(line_width);
+    }
+}
+
+void CommandSocket::sendProgress(float amount)
+{
+    auto message = std::make_shared<Cura::Progress>();
+    message->set_amount(amount);
+    d->socket->sendMessage(message);
+}
+
+void CommandSocket::sendPrintTime()
+{
+    auto message = std::make_shared<Cura::ObjectPrintTime>();
+    message->set_time(d->processor->getTotalPrintTime());
+    message->set_material_amount(d->processor->getTotalFilamentUsed(0));
+    d->socket->sendMessage(message);
+}
+
+void CommandSocket::sendPrintMaterialForObject(int index, int extruder_nr, float print_time)
+{
+//     socket.sendInt32(CMD_OBJECT_PRINT_MATERIAL);
+//     socket.sendInt32(12);
+//     socket.sendInt32(index);
+//     socket.sendInt32(extruder_nr);
+//     socket.sendFloat32(print_time);
+}
+
+void CommandSocket::beginSendSlicedObject()
+{
+    if(!d->slicedObjectList)
+    {
+        d->slicedObjectList = std::make_shared<Cura::SlicedObjectList>();
+    }
+
+    d->currentSlicedObject = d->slicedObjectList->add_objects();
+    d->currentSlicedObject->set_id(d->objectIds[d->slicedObjects]);
+}
+
+void CommandSocket::endSendSlicedObject()
+{
+    d->slicedObjects++;
+    if(d->slicedObjects >= d->object_count)
+    {
+        d->socket->sendMessage(d->slicedObjectList);
+        d->slicedObjects = 0;
+        d->slicedObjectList.reset();
+        d->currentSlicedObject = nullptr;
+    }
+}
+
+void CommandSocket::beginGCode()
+{
+    d->processor->setTargetStream(&d->gcode_output_stream);
+}
+
+void CommandSocket::sendGCodeLayer()
+{
+    auto message = std::make_shared<Cura::GCodeLayer>();
+    message->set_id(d->objectIds[0]);
+    message->set_data(d->gcode_output_stream.str());
+    d->socket->sendMessage(message);
+    
+    d->gcode_output_stream.str("");
+}
+
+void CommandSocket::sendGCodePrefix(std::string prefix)
+{
+    auto message = std::make_shared<Cura::GCodePrefix>();
+    message->set_data(prefix);
+    d->socket->sendMessage(message);
+}
+
+Cura::Layer* CommandSocket::Private::getLayerById(int id)
+{
+    auto itr = std::find_if(currentSlicedObject->mutable_layers()->begin(), currentSlicedObject->mutable_layers()->end(), [id](Cura::Layer& l) { return l.id() == id; });
+
+    Cura::Layer* layer = nullptr;
+    if(itr != currentSlicedObject->mutable_layers()->end())
+    {
+        layer = &(*itr);
+    }
+    else
+    {
+        layer = currentSlicedObject->add_layers();
+        layer->set_id(id);
+    }
+
+    return layer;
+}
+
+}//namespace cura

src/commandSocket.h

@@ -0,0 +1,45 @@
+#ifndef COMMAND_SOCKET_H
+#define COMMAND_SOCKET_H
+
+#include "utils/socket.h"
+#include "utils/polygon.h"
+#include "settings.h"
+
+#include <memory>
+
+#include "Cura.pb.h"
+
+namespace cura {
+
+class fffProcessor;
+class CommandSocket
+{
+public:
+    CommandSocket(fffProcessor* processor);
+
+    void connect(const std::string& ip, int port);
+
+    void handleObjectList(Cura::ObjectList* list);
+    void handleSettingList(Cura::SettingList* list);
+    
+    void sendLayerInfo(int layer_nr, int32_t z, int32_t height);
+    void sendPolygons(cura::PolygonType type, int layer_nr, cura::Polygons& polygons, int line_width);
+    void sendProgress(float amount);
+    void sendPrintTime();
+    void sendPrintMaterialForObject(int index, int extruder_nr, float material_amount);
+
+    void beginSendSlicedObject();
+    void endSendSlicedObject();
+
+    void beginGCode();
+    void sendGCodeLayer();
+    void sendGCodePrefix(std::string prefix);
+
+private:
+    class Private;
+    const std::unique_ptr<Private> d;
+};
+
+}//namespace cura
+
+#endif//COMMAND_SOCKET_H

src/debug.h

@@ -0,0 +1,61 @@
+#ifndef DEBUG_H
+#define DEBUG_H
+
+#include <string.h>
+
+#define __FILE_NAME__ (strrchr(__FILE__, '/') ? strrchr(__FILE__, '/') + 1 : __FILE__)
+
+
+#define DEBUG_HERE std::cerr << __FILE_NAME__ << " : " << __LINE__ << std::endl
+
+
+
+
+
+#define DEBUG 1
+
+#define DEBUG_SHOW_LINE 0
+
+#if DEBUG_SHOW_LINE == 1
+#define DEBUG_FILE_LINE __FILE_NAME__ << "." << __LINE__ << ": "
+#else
+#define DEBUG_FILE_LINE  ""
+#endif
+
+#if DEBUG == 1
+#   define DEBUG_DO(x) do { x } while (0)
+#   define DEBUG_SHOW(x) do {       std::cerr << DEBUG_FILE_LINE << #x << " = " << x << std::endl; } while (0)
+#   define DEBUG_PRINTLN(x) do {    std::cerr << DEBUG_FILE_LINE << x << std::endl; } while (0)
+#else
+#   define DEBUG_DO(x)
+#   define DEBUG_SHOW(x)
+#   define DEBUG_PRINTLN(x)
+#endif
+
+
+
+#include <sstream>
+
+#if 0==1
+#define ENUM(name, ...) enum class name { __VA_ARGS__, __COUNT};
+#endif
+#define ENUM(name, ...) enum class name { __VA_ARGS__}; \
+inline std::ostream& operator<<(std::ostream& os, name value) { \
+std::string enumName = #name; \
+std::string str = #__VA_ARGS__; \
+int len = str.length(); \
+std::vector<std::string> strings; \
+std::ostringstream temp; \
+for(int i = 0; i < len; i ++) { \
+if(isspace(str[i])) continue; \
+        else if(str[i] == ',') { \
+        strings.push_back(temp.str()); \
+        temp.str(std::string());\
+        } \
+        else temp<< str[i]; \
+} \
+strings.push_back(temp.str()); \
+os << enumName << "::" << strings[static_cast<int>(value)]; \
+return os;}
+
+#endif // DEBUG_H

src/gcodeExport.cpp

@@ -0,0 +1,479 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include <stdarg.h>
+#include <iomanip>
+
+#include "gcodeExport.h"
+#include "utils/logoutput.h"
+
+namespace cura {
+
+GCodeExport::GCodeExport()
+: output_stream(&std::cout), currentPosition(0,0,0), startPosition(INT32_MIN,INT32_MIN,0)
+{
+    extrusion_amount = 0;
+    retraction_extrusion_window = 0.0;
+    extruderSwitchRetraction = 14.5;
+    current_extruder = 0;
+    currentFanSpeed = -1;
+    
+    totalPrintTime = 0.0;
+    for(unsigned int e=0; e<MAX_EXTRUDERS; e++)
+    {
+        totalFilament[e] = 0.0;
+        currentTemperature[e] = 0;
+        filament_diameter[e] = 0;
+    }
+    
+    currentSpeed = 1;
+    retractionPrimeSpeed = 1;
+    isRetracted = false;
+    isZHopped = false;
+    setFlavor(GCODE_FLAVOR_REPRAP);
+    memset(extruderOffset, 0, sizeof(extruderOffset));
+}
+
+GCodeExport::~GCodeExport()
+{
+}
+
+void GCodeExport::setOutputStream(std::ostream* stream)
+{
+    output_stream = stream;
+    *output_stream << std::fixed;
+}
+
+void GCodeExport::setExtruderOffset(int id, Point p)
+{
+    extruderOffset[id] = p;
+}
+
+Point GCodeExport::getExtruderOffset(int id)
+{
+    return extruderOffset[id];
+}
+
+void GCodeExport::setSwitchExtruderCode(int id, std::string preSwitchExtruderCode, std::string postSwitchExtruderCode)
+{
+    this->preSwitchExtruderCode[id] = preSwitchExtruderCode;
+    this->postSwitchExtruderCode[id] = postSwitchExtruderCode;
+}
+
+void GCodeExport::setFlavor(EGCodeFlavor flavor)
+{
+    this->flavor = flavor;
+    if (flavor == GCODE_FLAVOR_MACH3)
+        for(int n=0; n<MAX_EXTRUDERS; n++)
+            extruderCharacter[n] = 'A' + n;
+    else
+        for(int n=0; n<MAX_EXTRUDERS; n++)
+            extruderCharacter[n] = 'E';
+    if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
+    {
+        is_volumatric = true;
+    } 
+    else 
+    {
+        is_volumatric = false;
+    }
+}
+
+EGCodeFlavor GCodeExport::getFlavor()
+{
+    return this->flavor;
+}
+
+void GCodeExport::setRetractionSettings(int extruderSwitchRetraction, int extruderSwitchRetractionSpeed, int extruderSwitchPrimeSpeed, int retraction_extrusion_window, int retraction_count_max)
+{
+    this->extruderSwitchRetraction = INT2MM(extruderSwitchRetraction);
+    this->extruderSwitchRetractionSpeed = extruderSwitchRetractionSpeed;
+    this->extruderSwitchPrimeSpeed = extruderSwitchPrimeSpeed;
+    this->retraction_extrusion_window = INT2MM(retraction_extrusion_window);
+    this->retraction_count_max = retraction_count_max;
+}
+
+void GCodeExport::setZ(int z)
+{
+    this->zPos = z;
+}
+
+Point3 GCodeExport::getPosition()
+{
+    return currentPosition;
+}
+Point GCodeExport::getPositionXY()
+{
+    return Point(currentPosition.x, currentPosition.y);
+}
+
+int GCodeExport::getPositionZ()
+{
+    return currentPosition.z;
+}
+
+void GCodeExport::resetStartPosition()
+{
+    startPosition.x = INT32_MIN;
+    startPosition.y = INT32_MIN;
+}
+
+Point GCodeExport::getStartPositionXY()
+{
+    return Point(startPosition.x, startPosition.y);
+}
+
+int GCodeExport::getExtruderNr()
+{
+    return current_extruder;
+}
+
+double GCodeExport::getFilamentArea(unsigned int extruder)
+{
+    double r = INT2MM(filament_diameter[extruder]) / 2.0;
+    double filament_area = M_PI * r * r;
+    return filament_area;
+}
+
+void GCodeExport::setFilamentDiameter(unsigned int n, int diameter)
+{
+    filament_diameter[n] = diameter;
+}
+
+double GCodeExport::getExtrusionAmountMM3(unsigned int extruder)
+{
+    if (is_volumatric)
+    {
+        return extrusion_amount;
+    }
+    else
+    {
+        return extrusion_amount * getFilamentArea(extruder);
+    }
+}
+
+
+double GCodeExport::getTotalFilamentUsed(int e)
+{
+    if (e == current_extruder)
+        return totalFilament[e] + getExtrusionAmountMM3(e);
+    return totalFilament[e];
+}
+
+double GCodeExport::getTotalPrintTime()
+{
+    return totalPrintTime;
+}
+
+void GCodeExport::resetTotalPrintTimeAndFilament()
+{
+    totalPrintTime = 0;
+    for(unsigned int e=0; e<MAX_EXTRUDERS; e++)
+    {
+        totalFilament[e] = 0.0;
+        currentTemperature[e] = 0;
+    }
+    extrusion_amount = 0.0;
+    estimateCalculator.reset();
+}
+
+void GCodeExport::updateTotalPrintTime()
+{
+    totalPrintTime += estimateCalculator.calculate();
+    estimateCalculator.reset();
+}
+
+void GCodeExport::writeComment(std::string comment)
+{
+    *output_stream << ";" << comment << "\n";
+}
+
+void GCodeExport::writeTypeComment(const char* type)
+{
+    *output_stream << ";TYPE:" << type << "\n";
+}
+void GCodeExport::writeLayerComment(int layer_nr)
+{
+    *output_stream << ";LAYER:" << layer_nr << "\n";
+}
+
+void GCodeExport::writeLine(const char* line)
+{
+    *output_stream << line << "\n";
+}
+
+void GCodeExport::resetExtrusionValue()
+{
+    if (extrusion_amount != 0.0 && flavor != GCODE_FLAVOR_MAKERBOT && flavor != GCODE_FLAVOR_BFB)
+    {
+        *output_stream << "G92 " << extruderCharacter[current_extruder] << "0\n";
+        totalFilament[current_extruder] += getExtrusionAmountMM3(current_extruder);
+        for (unsigned int i = 0; i < extrusion_amount_at_previous_n_retractions.size(); i++)
+            extrusion_amount_at_previous_n_retractions[i] -= extrusion_amount;
+        extrusion_amount = 0.0;
+    }
+}
+
+void GCodeExport::writeDelay(double timeAmount)
+{
+    *output_stream << "G4 P" << int(timeAmount * 1000) << "\n";
+    totalPrintTime += timeAmount;
+}
+
+void GCodeExport::writeMove(Point p, int speed, double extrusion_mm3_per_mm)
+{
+    writeMove(p.X, p.Y, zPos, speed, extrusion_mm3_per_mm);
+}
+
+void GCodeExport::writeMove(Point3 p, int speed, double extrusion_mm3_per_mm)
+{
+    writeMove(p.x, p.y, p.z, speed, extrusion_mm3_per_mm);
+}
+void GCodeExport::writeMove(int x, int y, int z, int speed, double extrusion_mm3_per_mm)
+{
+    if (currentPosition.x == x && currentPosition.y == y && currentPosition.z == z)
+        return;
+    
+    double extrusion_per_mm = extrusion_mm3_per_mm;
+    if (!is_volumatric)
+    {
+        extrusion_per_mm = extrusion_mm3_per_mm / getFilamentArea(current_extruder);
+    }
+
+    if (flavor == GCODE_FLAVOR_BFB)
+    {
+        //For Bits From Bytes machines, we need to handle this completely differently. As they do not use E values but RPM values.
+        float fspeed = speed * 60;
+        float rpm = extrusion_per_mm * speed * 60;
+        const float mm_per_rpm = 4.0; //All BFB machines have 4mm per RPM extrusion.
+        rpm /= mm_per_rpm;
+        if (rpm > 0)
+        {
+            if (isRetracted)
+            {
+                if (currentSpeed != int(rpm * 10))
+                {
+                    //fprintf(f, "; %f e-per-mm %d mm-width %d mm/s\n", extrusion_per_mm, lineWidth, speed);
+                    //fprintf(f, "M108 S%0.1f\r\n", rpm);
+                    *output_stream << "M108 S" << std::setprecision(1) << rpm << "\r\n";
+                    currentSpeed = int(rpm * 10);
+                }
+                //Add M101 or M201 to enable the proper extruder.
+                *output_stream << "M" << int((current_extruder + 1) * 100 + 1) << "\r\n";
+                isRetracted = false;
+            }
+            //Fix the speed by the actual RPM we are asking, because of rounding errors we cannot get all RPM values, but we have a lot more resolution in the feedrate value.
+            // (Trick copied from KISSlicer, thanks Jonathan)
+            fspeed *= (rpm / (roundf(rpm * 100) / 100));
+
+            //Increase the extrusion amount to calculate the amount of filament used.
+            Point3 diff = Point3(x,y,z) - getPosition();
+            
+            extrusion_amount += extrusion_per_mm * diff.vSizeMM();
+        }else{
+            //If we are not extruding, check if we still need to disable the extruder. This causes a retraction due to auto-retraction.
+            if (!isRetracted)
+            {
+                *output_stream << "M103\r\n";
+                isRetracted = true;
+            }
+        }
+        *output_stream << std::setprecision(3) << "G1 X" << INT2MM(x - extruderOffset[current_extruder].X) << " Y" << INT2MM(y - extruderOffset[current_extruder].Y) << " Z" << INT2MM(z) << std::setprecision(1) << " F" << fspeed << "\r\n";
+    }else{
+        //Normal E handling.
+        if (extrusion_mm3_per_mm > 0.000001)
+        {
+            Point3 diff = Point3(x,y,z) - getPosition();
+            if (isZHopped > 0)
+            {
+                *output_stream << std::setprecision(3) << "G1 Z" << INT2MM(currentPosition.z) << "\n";
+                isZHopped = false;
+            }
+            if (isRetracted)
+            {
+                if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
+                {
+                    *output_stream << "G11\n";
+                    //Assume default UM2 retraction settings.
+                    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount), 25.0);
+                }else{
+                    *output_stream << "G1 F" << (retractionPrimeSpeed * 60) << " " << extruderCharacter[current_extruder] << std::setprecision(5) << extrusion_amount << "\n";
+                    currentSpeed = retractionPrimeSpeed;
+                    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount), currentSpeed);
+                }
+                if (getExtrusionAmountMM3(current_extruder) > 10000.0) //According to https://github.com/Ultimaker/CuraEngine/issues/14 having more then 21m of extrusion causes inaccuracies. So reset it every 10m, just to be sure.
+                    resetExtrusionValue();
+                isRetracted = false;
+            }
+            extrusion_amount += extrusion_per_mm * diff.vSizeMM();
+            *output_stream << "G1";
+        }else{
+            *output_stream << "G0";
+        }
+
+        if (currentSpeed != speed)
+        {
+            *output_stream << " F" << (speed * 60);
+            currentSpeed = speed;
+        }
+
+        *output_stream << std::setprecision(3) << " X" << INT2MM(x - extruderOffset[current_extruder].X) << " Y" << INT2MM(y - extruderOffset[current_extruder].Y);
+        if (z != currentPosition.z)
+            *output_stream << " Z" << INT2MM(z);
+        if (extrusion_mm3_per_mm > 0.000001)
+            *output_stream << " " << extruderCharacter[current_extruder] << std::setprecision(5) << extrusion_amount;
+        *output_stream << "\n";
+    }
+    
+    currentPosition = Point3(x, y, z);
+    startPosition = currentPosition;
+    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount), speed);
+}
+
+void GCodeExport::writeRetraction(RetractionConfig* config, bool force)
+{
+    if (flavor == GCODE_FLAVOR_BFB)//BitsFromBytes does automatic retraction.
+        return;
+    if (isRetracted)
+        return;
+    if (config->amount <= 0)
+        return;
+    
+    if (!force && retraction_count_max > 0 && int(extrusion_amount_at_previous_n_retractions.size()) == retraction_count_max - 1 
+        && extrusion_amount < extrusion_amount_at_previous_n_retractions.back() + retraction_extrusion_window) 
+        return;
+
+    if (config->primeAmount > 0)
+        extrusion_amount += config->primeAmount;
+    retractionPrimeSpeed = config->primeSpeed;
+    
+    if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
+    {
+        *output_stream << "G10\n";
+        //Assume default UM2 retraction settings.
+        double retraction_distance = 4.5;
+        estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount - retraction_distance), 25); // TODO: hardcoded values!
+    }else{
+        *output_stream << "G1 F" << (config->speed * 60) << " " << extruderCharacter[current_extruder] << std::setprecision(5) << extrusion_amount - config->amount << "\n";
+        currentSpeed = config->speed;
+        estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount - config->amount), currentSpeed);
+    }
+    if (config->zHop > 0)
+    {
+        *output_stream << std::setprecision(3) << "G1 Z" << INT2MM(currentPosition.z + config->zHop) << "\n";
+        isZHopped = true;
+    }
+    extrusion_amount_at_previous_n_retractions.push_front(extrusion_amount);
+    if (int(extrusion_amount_at_previous_n_retractions.size()) == retraction_count_max)
+    {
+        extrusion_amount_at_previous_n_retractions.pop_back();
+    }
+    isRetracted = true;
+}
+
+void GCodeExport::switchExtruder(int newExtruder)
+{
+    if (current_extruder == newExtruder)
+        return;
+    
+    if (flavor == GCODE_FLAVOR_BFB)
+    {
+        if (!isRetracted)
+            *output_stream << "M103\r\n";
+
+        isRetracted = true;
+        return;
+    }
+    
+    resetExtrusionValue();
+    if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
+    {
+        *output_stream << "G10 S1\n";
+    }else{
+        *output_stream << "G1 F" << (extruderSwitchRetractionSpeed * 60) << " " << extruderCharacter[current_extruder] << std::setprecision(5) << (extrusion_amount - extruderSwitchRetraction) << "\n";
+        currentSpeed = extruderSwitchRetractionSpeed;
+    }
+
+    current_extruder = newExtruder;
+    if (flavor == GCODE_FLAVOR_MACH3)
+        resetExtrusionValue();
+    isRetracted = true;
+    writeCode(preSwitchExtruderCode[current_extruder].c_str());
+    if (flavor == GCODE_FLAVOR_MAKERBOT)
+        *output_stream << "M135 T" << current_extruder << "\n";
+    else
+        *output_stream << "T" << current_extruder << "\n";
+    writeCode(postSwitchExtruderCode[current_extruder].c_str());
+    
+    //Change the Z position so it gets re-writting again. We do not know if the switch code modified the Z position.
+    currentPosition.z += 1;
+}
+
+void GCodeExport::writeCode(const char* str)
+{
+    *output_stream << str;
+    if (flavor == GCODE_FLAVOR_BFB)
+        *output_stream << "\r\n";
+    else
+        *output_stream << "\n";
+}
+
+void GCodeExport::writeFanCommand(int speed)
+{
+    if (currentFanSpeed == speed)
+        return;
+    if (speed > 0)
+    {
+        if (flavor == GCODE_FLAVOR_MAKERBOT)
+            *output_stream << "M126 T0\n"; //value = speed * 255 / 100 // Makerbot cannot set fan speed...;
+        else
+            *output_stream << "M106 S" << (speed * 255 / 100) << "\n";
+    }
+    else
+    {
+        if (flavor == GCODE_FLAVOR_MAKERBOT)
+            *output_stream << "M127 T0\n";
+        else
+            *output_stream << "M107\n";
+    }
+    currentFanSpeed = speed;
+}
+
+void GCodeExport::writeTemperatureCommand(int extruder, int temperature, bool wait)
+{
+    if (!wait && currentTemperature[extruder] == temperature)
+        return;
+    
+    if (wait)
+        *output_stream << "M109";
+    else
+        *output_stream << "M104";
+    if (extruder != current_extruder)
+        *output_stream << " T" << extruder;
+    *output_stream << " S" << temperature << "\n";
+    currentTemperature[extruder] = temperature;
+}
+
+void GCodeExport::writeBedTemperatureCommand(int temperature, bool wait)
+{
+    if (wait)
+        *output_stream << "M190 S";
+    else
+        *output_stream << "M140 S";
+    *output_stream << temperature << "\n";
+}
+
+void GCodeExport::finalize(int maxObjectHeight, int moveSpeed, const char* endCode)
+{
+    std::cerr << "maxObjectHeight : " << maxObjectHeight << std::endl;
+    writeFanCommand(0);
+    setZ(maxObjectHeight + 5000);
+    writeMove(Point3(0,0,maxObjectHeight + 5000) + getPositionXY(), moveSpeed, 0);
+    writeCode(endCode);
+    log("Print time: %d\n", int(getTotalPrintTime()));
+    log("Filament: %d\n", int(getTotalFilamentUsed(0)));
+    for(int n=1; n<MAX_EXTRUDERS; n++)
+        if (getTotalFilamentUsed(n) > 0)
+            log("Filament%d: %d\n", n + 1, int(getTotalFilamentUsed(n)));
+    output_stream->flush();
+}
+
+}//namespace cura

src/gcodeExport.h

@@ -0,0 +1,199 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef GCODEEXPORT_H
+#define GCODEEXPORT_H
+
+#include <stdio.h>
+#include <deque> // for extrusionAmountAtPreviousRetractions
+
+#include "settings.h"
+#include "utils/intpoint.h"
+#include "timeEstimate.h"
+
+namespace cura {
+
+class RetractionConfig
+{
+public:
+    double amount; //!< The amount
+    int speed;
+    int primeSpeed;
+    double primeAmount;
+    int zHop;
+};
+
+//The GCodePathConfig is the configuration for moves/extrusion actions. This defines at which width the line is printed and at which speed.
+class GCodePathConfig
+{
+private:
+    int speed;
+    int line_width;
+    int flow;
+    int layer_thickness;
+    double extrusion_mm3_per_mm;
+public:
+    const char* name;
+    bool spiralize;
+    RetractionConfig* retraction_config;
+    
+    GCodePathConfig() : speed(0), line_width(0), extrusion_mm3_per_mm(0.0), name(nullptr), spiralize(false), retraction_config(nullptr) {}
+    GCodePathConfig(RetractionConfig* retraction_config, const char* name) : speed(0), line_width(0), extrusion_mm3_per_mm(0.0), name(name), spiralize(false), retraction_config(retraction_config) {}
+    
+    void setSpeed(int speed)
+    {
+        this->speed = speed;
+    }
+    
+    void setLineWidth(int line_width)
+    {
+        this->line_width = line_width;
+        calculateExtrusion();
+    }
+    
+    void setLayerHeight(int layer_height)
+    {
+        this->layer_thickness = layer_height;
+        calculateExtrusion();
+    }
+    
+    void setFlow(int flow)
+    {
+        this->flow = flow;
+        calculateExtrusion();
+    }
+    
+    void smoothSpeed(int min_speed, int layer_nr, int max_speed_layer)
+    {
+        speed = (speed*layer_nr)/max_speed_layer + (min_speed*(max_speed_layer-layer_nr)/max_speed_layer);
+    }
+    
+    double getExtrusionMM3perMM()
+    {
+        return extrusion_mm3_per_mm;
+    }
+    
+    int getSpeed()
+    {
+        return speed;
+    }
+    
+    int getLineWidth()
+    {
+        return line_width;
+    }
+
+private:
+    void calculateExtrusion()
+    {
+        extrusion_mm3_per_mm = INT2MM(line_width) * INT2MM(layer_thickness) * double(flow) / 100.0;
+    }
+};
+
+//The GCodeExport class writes the actual GCode. This is the only class that knows how GCode looks and feels.
+//  Any customizations on GCodes flavors are done in this class.
+class GCodeExport
+{
+private:
+    std::ostream* output_stream;
+    double extrusion_amount; // in mm or mm^3
+    double extruderSwitchRetraction;
+    int extruderSwitchRetractionSpeed;
+    int extruderSwitchPrimeSpeed;
+    double retraction_extrusion_window;
+    int retraction_count_max;
+    std::deque<double> extrusion_amount_at_previous_n_retractions; // in mm or mm^3
+    Point3 currentPosition;
+    Point3 startPosition;
+    Point extruderOffset[MAX_EXTRUDERS];
+    char extruderCharacter[MAX_EXTRUDERS];
+    int currentTemperature[MAX_EXTRUDERS];
+    int currentSpeed;
+    int zPos;
+    bool isRetracted;
+    bool isZHopped;
+    int retractionPrimeSpeed;
+    int current_extruder;
+    int currentFanSpeed;
+    EGCodeFlavor flavor;
+    std::string preSwitchExtruderCode[MAX_EXTRUDERS];
+    std::string postSwitchExtruderCode[MAX_EXTRUDERS];
+    
+    double totalFilament[MAX_EXTRUDERS]; // in mm^3
+    double filament_diameter[MAX_EXTRUDERS]; // in mm^3
+    double totalPrintTime;
+    TimeEstimateCalculator estimateCalculator;
+    
+    bool is_volumatric;
+public:
+    
+    GCodeExport();
+    ~GCodeExport();
+    
+    void setOutputStream(std::ostream* stream);
+    
+    void setExtruderOffset(int id, Point p);
+    Point getExtruderOffset(int id);
+    void setSwitchExtruderCode(int id, std::string preSwitchExtruderCode, std::string postSwitchExtruderCode);
+    
+    void setFlavor(EGCodeFlavor flavor);
+    EGCodeFlavor getFlavor();
+        
+    void setRetractionSettings(int extruderSwitchRetraction, int extruderSwitchRetractionSpeed, int extruderSwitchPrimeSpeed, int minimalExtrusionBeforeRetraction, int retraction_count_max);
+    
+    void setZ(int z);
+    
+    Point3 getPosition();
+    
+    Point getPositionXY();
+    
+    void resetStartPosition();
+
+    Point getStartPositionXY();
+
+    int getPositionZ();
+
+    int getExtruderNr();
+    
+    void setFilamentDiameter(unsigned int n, int diameter);
+    double getFilamentArea(unsigned int extruder);
+    
+    double getExtrusionAmountMM3(unsigned int extruder);
+    
+    double getTotalFilamentUsed(int e);
+
+    double getTotalPrintTime();
+    void updateTotalPrintTime();
+    void resetTotalPrintTimeAndFilament();
+    
+    void writeComment(std::string comment);
+    void writeTypeComment(const char* type);
+    void writeLayerComment(int layer_nr);
+    
+    void writeLine(const char* line);
+    
+    void resetExtrusionValue();
+    
+    void writeDelay(double timeAmount);
+    
+    void writeMove(Point p, int speed, double extrusion_per_mm);
+    
+    void writeMove(Point3 p, int speed, double extrusion_per_mm);
+private:
+    void writeMove(int x, int y, int z, int speed, double extrusion_per_mm);
+public:
+    void writeRetraction(RetractionConfig* config, bool force=false);
+    
+    void switchExtruder(int newExtruder);
+    
+    void writeCode(const char* str);
+    
+    void writeFanCommand(int speed);
+    
+    void writeTemperatureCommand(int extruder, int temperature, bool wait = false);
+    void writeBedTemperatureCommand(int temperature, bool wait = false);
+    
+    void finalize(int maxObjectHeight, int moveSpeed, const char* endCode);
+};
+
+}
+
+#endif//GCODEEXPORT_H

src/gcodePlanner.cpp

@@ -0,0 +1,313 @@
+#include "gcodePlanner.h"
+#include "pathOrderOptimizer.h"
+
+namespace cura {
+
+GCodePath* GCodePlanner::getLatestPathWithConfig(GCodePathConfig* config)
+{
+    if (paths.size() > 0 && paths[paths.size()-1].config == config && !paths[paths.size()-1].done)
+        return &paths[paths.size()-1];
+    paths.push_back(GCodePath());
+    GCodePath* ret = &paths[paths.size()-1];
+    ret->retract = false;
+    ret->config = config;
+    ret->extruder = currentExtruder;
+    ret->done = false;
+    return ret;
+}
+
+void GCodePlanner::forceNewPathStart()
+{
+    if (paths.size() > 0)
+        paths[paths.size()-1].done = true;
+}
+
+GCodePlanner::GCodePlanner(GCodeExport& gcode, RetractionConfig* retraction_config, int travelSpeed, int retractionMinimalDistance)
+: gcode(gcode), travelConfig(retraction_config, "MOVE")
+{
+    lastPosition = gcode.getPositionXY();
+    travelConfig.setSpeed(travelSpeed);
+    comb = nullptr;
+    extrudeSpeedFactor = 100;
+    travelSpeedFactor = 100;
+    extraTime = 0.0;
+    totalPrintTime = 0.0;
+    forceRetraction = false;
+    alwaysRetract = false;
+    currentExtruder = gcode.getExtruderNr();
+    this->retractionMinimalDistance = retractionMinimalDistance;
+}
+GCodePlanner::~GCodePlanner()
+{
+    if (comb)
+        delete comb;
+}
+
+void GCodePlanner::addTravel(Point p)
+{
+    GCodePath* path = getLatestPathWithConfig(&travelConfig);
+    if (forceRetraction)
+    {
+        if (!shorterThen(lastPosition - p, retractionMinimalDistance))
+        {
+            path->retract = true;
+        }
+        forceRetraction = false;
+    }else if (comb != nullptr)
+    {
+        std::vector<Point> pointList;
+        if (comb->calc(lastPosition, p, pointList))
+        {
+            for(unsigned int n=0; n<pointList.size(); n++)
+            {
+                path->points.push_back(pointList[n]);
+            }
+        }else{
+            if (!shorterThen(lastPosition - p, retractionMinimalDistance))
+                path->retract = true;
+        }
+    }else if (alwaysRetract)
+    {
+        if (!shorterThen(lastPosition - p, retractionMinimalDistance))
+            path->retract = true;
+    }
+    path->points.push_back(p);
+    lastPosition = p;
+}
+
+void GCodePlanner::addExtrusionMove(Point p, GCodePathConfig* config)
+{
+    getLatestPathWithConfig(config)->points.push_back(p);
+    lastPosition = p;
+}
+
+void GCodePlanner::moveInsideCombBoundary(int distance)
+{
+    if (!comb || comb->inside(lastPosition)) return;
+    Point p = lastPosition;
+    if (comb->moveInside(&p, distance))
+    {
+        //Move inside again, so we move out of tight 90deg corners
+        comb->moveInside(&p, distance);
+        if (comb->inside(p))
+        {
+            addTravel(p);
+            //Make sure the that any retraction happens after this move, not before it by starting a new move path.
+            forceNewPathStart();
+        }
+    }
+}
+
+void GCodePlanner::addPolygon(PolygonRef polygon, int startIdx, GCodePathConfig* config)
+{
+    Point p0 = polygon[startIdx];
+    addTravel(p0);
+    for(unsigned int i=1; i<polygon.size(); i++)
+    {
+        Point p1 = polygon[(startIdx + i) % polygon.size()];
+        addExtrusionMove(p1, config);
+        p0 = p1;
+    }
+    if (polygon.size() > 2)
+        addExtrusionMove(polygon[startIdx], config);
+}
+
+void GCodePlanner::addPolygonsByOptimizer(Polygons& polygons, GCodePathConfig* config)
+{
+    //log("addPolygonsByOptimizer");
+    PathOrderOptimizer orderOptimizer(lastPosition);
+    for(unsigned int i=0;i<polygons.size();i++)
+        orderOptimizer.addPolygon(polygons[i]);
+    orderOptimizer.optimize();
+    for(unsigned int i=0;i<orderOptimizer.polyOrder.size();i++)
+    {
+        int nr = orderOptimizer.polyOrder[i];
+        addPolygon(polygons[nr], orderOptimizer.polyStart[nr], config);
+    }
+}
+void GCodePlanner::addLinesByOptimizer(Polygons& polygons, GCodePathConfig* config)
+{
+    LineOrderOptimizer orderOptimizer(lastPosition);
+    for(unsigned int i=0;i<polygons.size();i++)
+        orderOptimizer.addPolygon(polygons[i]);
+    orderOptimizer.optimize();
+    for(unsigned int i=0;i<orderOptimizer.polyOrder.size();i++)
+    {
+        int nr = orderOptimizer.polyOrder[i];
+        addPolygon(polygons[nr], orderOptimizer.polyStart[nr], config);
+    }
+}
+
+void GCodePlanner::forceMinimalLayerTime(double minTime, int minimalSpeed, double travelTime, double extrudeTime)
+{
+    double totalTime = travelTime + extrudeTime; 
+    if (totalTime < minTime && extrudeTime > 0.0)
+    {
+        double minExtrudeTime = minTime - travelTime;
+        if (minExtrudeTime < 1)
+            minExtrudeTime = 1;
+        double factor = extrudeTime / minExtrudeTime;
+        for(unsigned int n=0; n<paths.size(); n++)
+        {
+            GCodePath* path = &paths[n];
+            if (path->config->getExtrusionMM3perMM() == 0)
+                continue;
+            int speed = path->config->getSpeed() * factor;
+            if (speed < minimalSpeed)
+                factor = double(minimalSpeed) / double(path->config->getSpeed());
+        }
+
+        //Only slow down with the minimal time if that will be slower then a factor already set. First layer slowdown also sets the speed factor.
+        if (factor * 100 < getExtrudeSpeedFactor())
+            setExtrudeSpeedFactor(factor * 100);
+        else
+            factor = getExtrudeSpeedFactor() / 100.0;
+
+        if (minTime - (extrudeTime / factor) - travelTime > 0.1)
+        {
+            this->extraTime = minTime - (extrudeTime / factor) - travelTime;
+        }
+        this->totalPrintTime = (extrudeTime / factor) + travelTime;
+    }else{
+        this->totalPrintTime = totalTime;
+    }
+}
+
+void GCodePlanner::getTimes(double& travelTime, double& extrudeTime)
+{
+    travelTime = 0.0;
+    extrudeTime = 0.0;
+    Point p0 = gcode.getPositionXY();
+    for(unsigned int n=0; n<paths.size(); n++)
+    {
+        GCodePath* path = &paths[n];
+        for(unsigned int i=0; i<path->points.size(); i++)
+        {
+            double thisTime = vSizeMM(p0 - path->points[i]) / double(path->config->getSpeed());
+            if (path->config->getExtrusionMM3perMM() != 0)
+                extrudeTime += thisTime;
+            else
+                travelTime += thisTime;
+            p0 = path->points[i];
+        }
+    }
+}
+
+void GCodePlanner::writeGCode(bool liftHeadIfNeeded, int layerThickness)
+{
+    GCodePathConfig* lastConfig = nullptr;
+    int extruder = gcode.getExtruderNr();
+
+    for(unsigned int n=0; n<paths.size(); n++)
+    {
+        GCodePath* path = &paths[n];
+        if (extruder != path->extruder)
+        {
+            extruder = path->extruder;
+            gcode.switchExtruder(extruder);
+        }else if (path->retract)
+        {
+            gcode.writeRetraction(path->config->retraction_config);
+        }
+        if (path->config != &travelConfig && lastConfig != path->config)
+        {
+            gcode.writeTypeComment(path->config->name);
+            lastConfig = path->config;
+        }
+        int speed = path->config->getSpeed();
+
+        if (path->config->getExtrusionMM3perMM() != 0)// Only apply the extrudeSpeedFactor to extrusion moves
+            speed = speed * extrudeSpeedFactor / 100;
+        else
+            speed = speed * travelSpeedFactor / 100;
+
+        if (path->points.size() == 1 && path->config != &travelConfig && shorterThen(gcode.getPositionXY() - path->points[0], path->config->getLineWidth() * 2))
+        {
+            //Check for lots of small moves and combine them into one large line
+            Point p0 = path->points[0];
+            unsigned int i = n + 1;
+            while(i < paths.size() && paths[i].points.size() == 1 && shorterThen(p0 - paths[i].points[0], path->config->getLineWidth() * 2))
+            {
+                p0 = paths[i].points[0];
+                i ++;
+            }
+            if (paths[i-1].config == &travelConfig)
+                i --;
+            if (i > n + 2)
+            {
+                p0 = gcode.getPositionXY();
+                for(unsigned int x=n; x<i-1; x+=2)
+                {
+                    int64_t new_width = vSize(p0 - paths[x].points[0]); // = old_length
+                    Point newPoint = (paths[x].points[0] + paths[x+1].points[0]) / 2;
+                    int64_t old_width = path->config->getLineWidth();
+                    if (old_width > 0)
+                    {
+                        if (new_width > 0)
+                            gcode.writeMove(newPoint, speed * old_width / new_width, path->config->getExtrusionMM3perMM() * new_width / old_width);
+                        else 
+                            gcode.writeMove(newPoint, speed, path->config->getExtrusionMM3perMM());
+                    }
+                    p0 = paths[x+1].points[0];
+                }
+                gcode.writeMove(paths[i-1].points[0], speed, path->config->getExtrusionMM3perMM());
+                n = i - 1;
+                continue;
+            }
+        }
+
+        bool spiralize = path->config->spiralize;
+        if (spiralize)
+        {
+            //Check if we are the last spiralize path in the list, if not, do not spiralize.
+            for(unsigned int m=n+1; m<paths.size(); m++)
+            {
+                if (paths[m].config->spiralize)
+                    spiralize = false;
+            }
+        }
+        if (spiralize)
+        {
+            //If we need to spiralize then raise the head slowly by 1 layer as this path progresses.
+            float totalLength = 0.0;
+            int z = gcode.getPositionZ();
+            Point p0 = gcode.getPositionXY();
+            for(unsigned int i=0; i<path->points.size(); i++)
+            {
+                Point p1 = path->points[i];
+                totalLength += vSizeMM(p0 - p1);
+                p0 = p1;
+            }
+
+            float length = 0.0;
+            p0 = gcode.getPositionXY();
+            for(unsigned int i=0; i<path->points.size(); i++)
+            {
+                Point p1 = path->points[i];
+                length += vSizeMM(p0 - p1);
+                p0 = p1;
+                gcode.setZ(z + layerThickness * length / totalLength);
+                gcode.writeMove(path->points[i], speed, path->config->getExtrusionMM3perMM());
+            }
+        }else{
+            for(unsigned int i=0; i<path->points.size(); i++)
+            {
+                gcode.writeMove(path->points[i], speed, path->config->getExtrusionMM3perMM());
+            }
+        }
+    }
+
+    gcode.updateTotalPrintTime();
+    if (liftHeadIfNeeded && extraTime > 0.0)
+    {
+        gcode.writeComment("Small layer, adding delay");
+        if (lastConfig)
+            gcode.writeRetraction(lastConfig->retraction_config, true);
+        gcode.setZ(gcode.getPositionZ() + MM2INT(3.0));
+        gcode.writeMove(gcode.getPositionXY(), travelConfig.getSpeed(), 0);
+        gcode.writeMove(gcode.getPositionXY() - Point(-MM2INT(20.0), 0), travelConfig.getSpeed(), 0);
+        gcode.writeDelay(extraTime);
+    }
+}
+
+}//namespace cura

src/gcodePlanner.h

@@ -0,0 +1,126 @@
+#ifndef GCODE_PLANNER_H
+#define GCODE_PLANNER_H
+
+#include <vector>
+
+#include "gcodeExport.h"
+#include "comb.h"
+#include "utils/polygon.h"
+#include "utils/logoutput.h"
+
+namespace cura 
+{
+
+class GCodePath
+{
+public:
+    GCodePathConfig* config;
+    bool retract;
+    int extruder;
+    std::vector<Point> points;
+    bool done;//Path is finished, no more moves should be added, and a new path should be started instead of any appending done to this one.
+};
+
+//The GCodePlanner class stores multiple moves that are planned.
+// It facilitates the combing to keep the head inside the print.
+// It also keeps track of the print time estimate for this planning so speed adjustments can be made for the minimal-layer-time.
+class GCodePlanner
+{
+private:
+    GCodeExport& gcode;
+
+    Point lastPosition;
+    std::vector<GCodePath> paths;
+    Comb* comb;
+
+    GCodePathConfig travelConfig;
+    int extrudeSpeedFactor;
+    int travelSpeedFactor;
+    int currentExtruder;
+    int retractionMinimalDistance;
+    bool forceRetraction;
+    bool alwaysRetract;
+    double extraTime;
+    double totalPrintTime;
+    
+private:
+    GCodePath* getLatestPathWithConfig(GCodePathConfig* config);
+    void forceNewPathStart();
+public:
+    GCodePlanner(GCodeExport& gcode, RetractionConfig* retraction_config, int travelSpeed, int retractionMinimalDistance);
+    ~GCodePlanner();
+
+    bool setExtruder(int extruder)
+    {
+        if (extruder == currentExtruder)
+            return false;
+        currentExtruder = extruder;
+        return true;
+    }
+
+    int getExtruder()
+    {
+        return currentExtruder;
+    }
+
+    void setCombBoundary(Polygons* polygons)
+    {
+        if (comb)
+            delete comb;
+        if (polygons)
+            comb = new Comb(*polygons);
+        else
+            comb = nullptr;
+    }
+
+    void setAlwaysRetract(bool alwaysRetract)
+    {
+        this->alwaysRetract = alwaysRetract;
+    }
+
+    void forceRetract()
+    {
+        forceRetraction = true;
+    }
+
+    void setExtrudeSpeedFactor(int speedFactor)
+    {
+        if (speedFactor < 1) speedFactor = 1;
+        this->extrudeSpeedFactor = speedFactor;
+    }
+    int getExtrudeSpeedFactor()
+    {
+        return this->extrudeSpeedFactor;
+    }
+    void setTravelSpeedFactor(int speedFactor)
+    {
+        if (speedFactor < 1) speedFactor = 1;
+        this->travelSpeedFactor = speedFactor;
+    }
+    int getTravelSpeedFactor()
+    {
+        return this->travelSpeedFactor;
+    }
+
+    void addTravel(Point p);
+
+    void addExtrusionMove(Point p, GCodePathConfig* config);
+
+    void moveInsideCombBoundary(int distance);
+
+    void addPolygon(PolygonRef polygon, int startIdx, GCodePathConfig* config);
+
+    void addPolygonsByOptimizer(Polygons& polygons, GCodePathConfig* config);
+
+    void addLinesByOptimizer(Polygons& polygons, GCodePathConfig* config);
+
+    void forceMinimalLayerTime(double minTime, int minimalSpeed, double travelTime, double extrusionTime);
+    
+    void getTimes(double& travelTime, double& extrudeTime);
+
+    void writeGCode(bool liftHeadIfNeeded, int layerThickness);
+};
+
+}//namespace cura
+
+#endif//GCODE_PLANNER_H

src/infill.cpp

@@ -0,0 +1,476 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include "infill.h"
+#include "functional"
+#include "utils/polygonUtils.h"
+namespace cura {
+
+    
+      
+void generateConcentricInfillDense(Polygons outline, Polygons& result, Polygons* in_between, int extrusionWidth, bool avoidOverlappingPerimeters)
+{
+    while(outline.size() > 0)
+    {
+        for (unsigned int polyNr = 0; polyNr < outline.size(); polyNr++)
+        {
+            PolygonRef r = outline[polyNr];
+            result.add(r);
+        }
+        Polygons next_outline;
+        offsetExtrusionWidth(outline, true, extrusionWidth, next_outline, in_between, avoidOverlappingPerimeters);
+        outline = next_outline;
+    } 
+
+}
+
+void generateConcentricInfill(Polygons outline, Polygons& result, int inset_value)
+{
+    while(outline.size() > 0)
+    {
+        for (unsigned int polyNr = 0; polyNr < outline.size(); polyNr++)
+        {
+            PolygonRef r = outline[polyNr];
+            result.add(r);
+        }
+        outline = outline.offset(-inset_value);
+    } 
+}
+
+
+void generateGridInfill(const Polygons& in_outline, int outlineOffset, Polygons& result,
+                        int extrusionWidth, int lineSpacing, int infillOverlap,
+                        double rotation)
+{
+    generateLineInfill(in_outline, outlineOffset, result, extrusionWidth, lineSpacing,
+                       infillOverlap, rotation);
+    generateLineInfill(in_outline, outlineOffset, result, extrusionWidth, lineSpacing,
+                       infillOverlap, rotation + 90);
+}
+
+void generateTriangleInfill(const Polygons& in_outline, int outlineOffset, Polygons& result,
+                        int extrusionWidth, int lineSpacing, int infillOverlap,
+                        double rotation)
+{
+    generateLineInfill(in_outline, outlineOffset, result, extrusionWidth, lineSpacing,
+                       infillOverlap, rotation);
+    generateLineInfill(in_outline, outlineOffset, result, extrusionWidth, lineSpacing,
+                       infillOverlap, rotation + 60);
+    generateLineInfill(in_outline, outlineOffset, result, extrusionWidth, lineSpacing,
+                       infillOverlap, rotation + 120);
+}
+
+void addLineInfill(Polygons& result, PointMatrix matrix, int scanline_min_idx, int lineSpacing, AABB boundary, std::vector<std::vector<int64_t> > cutList, int extrusionWidth)
+{
+    auto addLine = [&](Point from, Point to)
+    {            
+        PolygonRef p = result.newPoly();
+        p.add(matrix.unapply(from));
+        p.add(matrix.unapply(to));
+    };
+    
+    auto compare_int64_t = [](const void* a, const void* b)
+    {
+        int64_t n = (*(int64_t*)a) - (*(int64_t*)b);
+        if (n < 0) return -1;
+        if (n > 0) return 1;
+        return 0;
+    };
+    
+    int scanline_idx = 0;
+    for(int64_t x = scanline_min_idx * lineSpacing; x < boundary.max.X; x += lineSpacing)
+    {
+        qsort(cutList[scanline_idx].data(), cutList[scanline_idx].size(), sizeof(int64_t), compare_int64_t);
+        for(unsigned int i = 0; i + 1 < cutList[scanline_idx].size(); i+=2)
+        {
+            if (cutList[scanline_idx][i+1] - cutList[scanline_idx][i] < extrusionWidth / 5)
+                continue;
+            addLine(Point(x, cutList[scanline_idx][i]), Point(x, cutList[scanline_idx][i+1]));
+        }
+        scanline_idx += 1;
+    }
+}
+
+/*!
+ * generate lines within the area of \p in_outline, at regular intervals of \p lineSpacing
+ * 
+ * idea:
+ * intersect a regular grid of 'scanlines' with the area inside \p in_outline
+ * 
+ * we call the areas between two consecutive scanlines a 'scansegment'.
+ * Scansegment x is the area between scanline x and scanline x+1
+ * 
+ * algorithm:
+ * 1) for each line segment of each polygon:
+ *      store the intersections of that line segment with all scanlines in a mapping (vector of vectors) from scanline to intersections
+ *      (zigzag): add boundary segments to result
+ * 2) for each scanline:
+ *      sort the associated intersections 
+ *      and connect them using the even-odd rule
+ * 
+ */
+void generateLineInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation)
+{
+    if (in_outline.size() == 0) return;
+    Polygons outline = in_outline.offset(extrusionWidth * infillOverlap / 100 + outlineOffset);
+    if (outline.size() == 0) return;
+    
+    PointMatrix matrix(rotation);
+    
+    outline.applyMatrix(matrix);
+
+    
+    AABB boundary(outline);
+    
+    int scanline_min_idx = boundary.min.X / lineSpacing;
+    int lineCount = (boundary.max.X + (lineSpacing - 1)) / lineSpacing - scanline_min_idx;
+  
+    std::vector<std::vector<int64_t> > cutList; // mapping from scanline to all intersections with polygon segments
+    
+    for(int n=0; n<lineCount; n++)
+        cutList.push_back(std::vector<int64_t>());
+    
+    for(unsigned int poly_idx=0; poly_idx < outline.size(); poly_idx++)
+    {
+        Point p0 = outline[poly_idx][outline[poly_idx].size()-1];
+        for(unsigned int i=0; i < outline[poly_idx].size(); i++)
+        {
+            Point p1 = outline[poly_idx][i];
+            int64_t xMin = p1.X, xMax = p0.X;
+            if (xMin == xMax) {
+                p0 = p1;
+                continue; 
+            }
+            if (xMin > xMax) { xMin = p0.X; xMax = p1.X; }
+            
+            int scanline_idx0 = (p0.X + ((p0.X > 0)? -1 : -lineSpacing)) / lineSpacing; // -1 cause a linesegment on scanline x counts as belonging to scansegment x-1   ...
+            int scanline_idx1 = (p1.X + ((p1.X > 0)? -1 : -lineSpacing)) / lineSpacing; // -linespacing because a line between scanline -n and -n-1 belongs to scansegment -n-1 (for n=positive natural number)
+            int direction = 1;
+            if (p0.X > p1.X) 
+            { 
+                direction = -1; 
+                scanline_idx1 += 1; // only consider the scanlines in between the scansegments
+            } else scanline_idx0 += 1; // only consider the scanlines in between the scansegments
+            
+            for(int scanline_idx = scanline_idx0; scanline_idx != scanline_idx1+direction; scanline_idx+=direction)
+            {
+                int x = scanline_idx * lineSpacing;
+                int y = p1.Y + (p0.Y - p1.Y) * (x - p1.X) / (p0.X - p1.X);
+                cutList[scanline_idx - scanline_min_idx].push_back(y);
+            }
+            p0 = p1;
+        }
+    }
+    
+    addLineInfill(result, matrix, scanline_min_idx, lineSpacing, boundary, cutList, extrusionWidth);
+}
+
+
+void generateZigZagInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags, bool use_endPieces)
+{
+    if (use_endPieces) return generateZigZagInfill_endPieces(in_outline, result, extrusionWidth, lineSpacing, infillOverlap, rotation, connect_zigzags);
+    else return generateZigZagInfill_noEndPieces(in_outline, result, extrusionWidth, lineSpacing, infillOverlap, rotation);
+}
+
+/*!
+ * adapted from generateLineInfill(.)
+ * 
+ * generate lines within the area of [in_outline], at regular intervals of [lineSpacing]
+ * idea:
+ * intersect a regular grid of 'scanlines' with the area inside [in_outline]
+ * sigzag:
+ * include pieces of boundary, connecting the lines, forming an accordion like zigzag instead of separate lines    |_|^|_|
+ * 
+ * we call the areas between two consecutive scanlines a 'scansegment'
+ * 
+ * algorithm:
+ * 1. for each line segment of each polygon:
+ *      store the intersections of that line segment with all scanlines in a mapping (vector of vectors) from scanline to intersections
+ *      (zigzag): add boundary segments to result
+ * 2. for each scanline:
+ *      sort the associated intersections 
+ *      and connect them using the even-odd rule
+ * 
+ * zigzag algorithm:
+ * while walking around (each) polygon (1.)
+ *  if polygon intersects with even scanline
+ *      start boundary segment (add each following segment to the [result])
+ *  when polygon intersects with a scanline again
+ *      stop boundary segment (stop adding segments to the [result])
+ *      if polygon intersects with even scanline again (instead of odd)
+ *          dont add the last line segment to the boundary (unless [connect_zigzags])
+ * 
+ * 
+ *     <--
+ *     ___
+ *    |   |   |
+ *    |   |   |
+ *    |   |___|
+ *         -->
+ * 
+ *        ^ = even scanline
+ * 
+ * start boundary from even scanline! :D
+ * 
+ * 
+ *          _____
+ *   |     |     | ,
+ *   |     |     |  |
+ *   |_____|     |__/
+ * 
+ *   ^     ^     ^    scanlines
+ *                 ^  disconnected end piece
+ */
+void generateZigZagInfill_endPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags)
+{
+//     if (in_outline.size() == 0) return;
+//     Polygons outline = in_outline.offset(extrusionWidth * infillOverlap / 100 - extrusionWidth / 2);
+    Polygons empty;
+    Polygons outline = in_outline.difference(empty); // copy
+    if (outline.size() == 0) return;
+    
+    PointMatrix matrix(rotation);
+    
+    outline.applyMatrix(matrix);
+    
+    auto addLine = [&](Point from, Point to)
+    {            
+        PolygonRef p = result.newPoly();
+        p.add(matrix.unapply(from));
+        p.add(matrix.unapply(to));
+    };   
+        
+    AABB boundary(outline);
+    
+    int scanline_min_idx = boundary.min.X / lineSpacing;
+    int lineCount = (boundary.max.X + (lineSpacing - 1)) / lineSpacing - scanline_min_idx;
+    
+    std::vector<std::vector<int64_t> > cutList; // mapping from scanline to all intersections with polygon segments
+    
+    for(int n=0; n<lineCount; n++)
+        cutList.push_back(std::vector<int64_t>());
+    for(unsigned int polyNr=0; polyNr < outline.size(); polyNr++)
+    {
+        std::vector<Point> firstBoundarySegment;
+        std::vector<Point> unevenBoundarySegment; // stored cause for connected_zigzags a boundary segment which ends in an uneven scanline needs to be included
+        
+        bool isFirstBoundarySegment = true;
+        bool firstBoundarySegmentEndsInEven;
+        
+        bool isEvenScanSegment = false; 
+        
+        
+        Point p0 = outline[polyNr][outline[polyNr].size()-1];
+        Point lastPoint = p0;
+        for(unsigned int i=0; i < outline[polyNr].size(); i++)
+        {
+            Point p1 = outline[polyNr][i];
+            int64_t xMin = p1.X, xMax = p0.X;
+            if (xMin == xMax) {
+                lastPoint = p1;
+                p0 = p1;
+                continue; 
+            }
+            if (xMin > xMax) { xMin = p0.X; xMax = p1.X; }
+            
+            int scanline_idx0 = (p0.X + ((p0.X > 0)? -1 : -lineSpacing)) / lineSpacing; // -1 cause a linesegment on scanline x counts as belonging to scansegment x-1   ...
+            int scanline_idx1 = (p1.X + ((p1.X > 0)? -1 : -lineSpacing)) / lineSpacing; // -linespacing because a line between scanline -n and -n-1 belongs to scansegment -n-1 (for n=positive natural number)
+            int direction = 1;
+            if (p0.X > p1.X) 
+            { 
+                direction = -1; 
+                scanline_idx1 += 1; // only consider the scanlines in between the scansegments
+            } else scanline_idx0 += 1; // only consider the scanlines in between the scansegments
+            
+            
+            if (isFirstBoundarySegment) firstBoundarySegment.push_back(p0);
+            for(int scanline_idx = scanline_idx0; scanline_idx != scanline_idx1+direction; scanline_idx+=direction)
+            {
+                int x = scanline_idx * lineSpacing;
+                int y = p1.Y + (p0.Y - p1.Y) * (x - p1.X) / (p0.X - p1.X);
+                cutList[scanline_idx - scanline_min_idx].push_back(y);
+                
+                
+                bool last_isEvenScanSegment = isEvenScanSegment;
+                if (scanline_idx % 2 == 0) isEvenScanSegment = true;
+                else isEvenScanSegment = false;
+                
+                if (!isFirstBoundarySegment)
+                {
+                    if (last_isEvenScanSegment && (connect_zigzags || !isEvenScanSegment))
+                        addLine(lastPoint, Point(x,y));
+                    else if (connect_zigzags && !last_isEvenScanSegment && !isEvenScanSegment) // if we end an uneven boundary in an uneven segment
+                    { // add whole unevenBoundarySegment (including the just obtained point)
+                        for (unsigned int p = 1; p < unevenBoundarySegment.size(); p++)
+                        {
+                            addLine(unevenBoundarySegment[p-1], unevenBoundarySegment[p]);
+                        }
+                        addLine(unevenBoundarySegment[unevenBoundarySegment.size()-1], Point(x,y));
+                        unevenBoundarySegment.clear();
+                    } 
+                    if (connect_zigzags && last_isEvenScanSegment && !isEvenScanSegment)
+                        unevenBoundarySegment.push_back(Point(x,y));
+                    else 
+                        unevenBoundarySegment.clear();
+                        
+                }
+                lastPoint = Point(x,y);
+                
+                if (isFirstBoundarySegment) 
+                {
+                    firstBoundarySegment.emplace_back(x,y);
+                    firstBoundarySegmentEndsInEven = isEvenScanSegment;
+                    isFirstBoundarySegment = false;
+                }
+                
+            }
+            if (!isFirstBoundarySegment)
+            {
+                if (isEvenScanSegment)
+                    addLine(lastPoint, p1);
+                else if (connect_zigzags)
+                    unevenBoundarySegment.push_back(p1);
+            }
+            
+            lastPoint = p1;
+            p0 = p1;
+        }
+        
+        if (isEvenScanSegment || isFirstBoundarySegment || connect_zigzags)
+        {
+            for (unsigned int i = 1; i < firstBoundarySegment.size() ; i++)
+            {
+                if (i < firstBoundarySegment.size() - 1 || !firstBoundarySegmentEndsInEven || connect_zigzags) // only add last element if connect_zigzags or boundary segment ends in uneven scanline
+                    addLine(firstBoundarySegment[i-1], firstBoundarySegment[i]);
+            }   
+        }
+        else if (!firstBoundarySegmentEndsInEven)
+            addLine(firstBoundarySegment[firstBoundarySegment.size()-2], firstBoundarySegment[firstBoundarySegment.size()-1]);
+    } 
+    
+    if (cutList.size() == 0) return;
+    if (connect_zigzags && cutList.size() == 1 && cutList[0].size() <= 2) return;  // don't add connection if boundary already contains whole outline!
+    
+    addLineInfill(result, matrix, scanline_min_idx, lineSpacing, boundary, cutList, extrusionWidth);
+}
+
+
+void generateZigZagInfill_noEndPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation)
+{
+    if (in_outline.size() == 0) return;
+    Polygons outline = in_outline.offset(extrusionWidth * infillOverlap / 100 - extrusionWidth / 2);
+    if (outline.size() == 0) return;
+    
+    PointMatrix matrix(rotation);
+    
+    outline.applyMatrix(matrix);
+    
+    auto addLine = [&](Point from, Point to)
+    {            
+        PolygonRef p = result.newPoly();
+        p.add(matrix.unapply(from));
+        p.add(matrix.unapply(to));
+    };   
+        
+    AABB boundary(outline);
+    
+    int scanline_min_idx = boundary.min.X / lineSpacing;
+    int lineCount = (boundary.max.X + (lineSpacing - 1)) / lineSpacing - scanline_min_idx;
+    
+    std::vector<std::vector<int64_t> > cutList; // mapping from scanline to all intersections with polygon segments
+    
+    for(int n=0; n<lineCount; n++)
+        cutList.push_back(std::vector<int64_t>());
+    for(unsigned int polyNr=0; polyNr < outline.size(); polyNr++)
+    {
+        std::vector<Point> firstBoundarySegment;
+        std::vector<Point> boundarySegment;
+        
+        bool isFirstBoundarySegment = true;
+        bool firstBoundarySegmentEndsInEven;
+        
+        bool isEvenScanSegment = false; 
+        
+        
+        Point p0 = outline[polyNr][outline[polyNr].size()-1];
+        for(unsigned int i=0; i < outline[polyNr].size(); i++)
+        {
+            Point p1 = outline[polyNr][i];
+            int64_t xMin = p1.X, xMax = p0.X;
+            if (xMin == xMax) {
+                p0 = p1;
+                continue; 
+            }
+            if (xMin > xMax) { xMin = p0.X; xMax = p1.X; }
+            
+            int scanline_idx0 = (p0.X + ((p0.X > 0)? -1 : -lineSpacing)) / lineSpacing; // -1 cause a linesegment on scanline x counts as belonging to scansegment x-1   ...
+            int scanline_idx1 = (p1.X + ((p1.X > 0)? -1 : -lineSpacing)) / lineSpacing; // -linespacing because a line between scanline -n and -n-1 belongs to scansegment -n-1 (for n=positive natural number)
+            int direction = 1;
+            if (p0.X > p1.X) 
+            { 
+                direction = -1; 
+                scanline_idx1 += 1; // only consider the scanlines in between the scansegments
+            } else scanline_idx0 += 1; // only consider the scanlines in between the scansegments
+            
+            
+            if (isFirstBoundarySegment) firstBoundarySegment.push_back(p0);
+            else boundarySegment.push_back(p0);
+            for(int scanline_idx = scanline_idx0; scanline_idx != scanline_idx1+direction; scanline_idx+=direction)
+            {
+                int x = scanline_idx * lineSpacing;
+                int y = p1.Y + (p0.Y - p1.Y) * (x - p1.X) / (p0.X - p1.X);
+                cutList[scanline_idx - scanline_min_idx].push_back(y);
+                
+                
+                bool last_isEvenScanSegment = isEvenScanSegment;
+                if (scanline_idx % 2 == 0) isEvenScanSegment = true;
+                else isEvenScanSegment = false;
+                
+                if (!isFirstBoundarySegment)
+                {
+                    if (last_isEvenScanSegment && !isEvenScanSegment)
+                    { // add whole boundarySegment (including the just obtained point)
+                        for (unsigned int p = 1; p < boundarySegment.size(); p++)
+                        {
+                            addLine(boundarySegment[p-1], boundarySegment[p]);
+                        }
+                        addLine(boundarySegment[boundarySegment.size()-1], Point(x,y));
+                        boundarySegment.clear();
+                    } 
+                    else if (isEvenScanSegment) // we are either in an end piece or an uneven boundary segment
+                    {
+                        boundarySegment.clear();
+                        boundarySegment.emplace_back(x,y);
+                    } else
+                        boundarySegment.clear();
+                        
+                }
+                
+                if (isFirstBoundarySegment) 
+                {
+                    firstBoundarySegment.emplace_back(x,y);
+                    firstBoundarySegmentEndsInEven = isEvenScanSegment;
+                    isFirstBoundarySegment = false;
+                    boundarySegment.emplace_back(x,y);
+                }
+                
+            }
+            if (!isFirstBoundarySegment && isEvenScanSegment)
+                boundarySegment.push_back(p1);
+            
+            
+            p0 = p1;
+        }
+        
+        if (!isFirstBoundarySegment && isEvenScanSegment && !firstBoundarySegmentEndsInEven)
+        {
+            for (unsigned int i = 1; i < firstBoundarySegment.size() ; i++)
+                addLine(firstBoundarySegment[i-1], firstBoundarySegment[i]);
+        }
+    } 
+    
+
+    addLineInfill(result, matrix, scanline_min_idx, lineSpacing, boundary, cutList, extrusionWidth);
+
+}
+
+
+}//namespace cura

src/infill.h

@@ -0,0 +1,19 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef INFILL_H
+#define INFILL_H
+
+#include "utils/polygon.h"
+
+namespace cura {
+
+void generateConcentricInfill(Polygons outline, Polygons& result, int inset_value);
+void generateConcentricInfillDense(Polygons outline, Polygons& result, Polygons* in_between, int extrusionWidth, bool avoidOverlappingPerimeters);
+void generateGridInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
+void generateTriangleInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
+void generateLineInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
+void generateZigZagInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags, bool use_endPieces);
+void generateZigZagInfill_endPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags);
+void generateZigZagInfill_noEndPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
+}//namespace cura
+
+#endif//INFILL_H

src/inset.cpp

@@ -0,0 +1,60 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include "inset.h"
+#include "polygonOptimizer.h"
+#include "utils/polygonUtils.h"
+namespace cura {
+
+void generateInsets(SliceLayerPart* part, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters)
+{
+    int combBoundaryInset = line_width_x/2; // hard coded value
+    part->combBoundery = part->outline.offset(-combBoundaryInset);
+    if (insetCount == 0)
+    {
+        part->insets.push_back(part->outline);
+        return;
+    }
+    
+    for(int i=0; i<insetCount; i++)
+    {
+        part->insets.push_back(Polygons());
+        if (i == 0)
+        {
+            offsetSafe(part->outline, - line_width_x/2, line_width_x, part->insets[i], avoidOverlappingPerimeters);
+        } else if (i == 1)
+        {
+            offsetExtrusionWidth(part->insets[i-1], true, line_width_0, part->insets[i], &part->perimeterGaps, avoidOverlappingPerimeters);
+        } else
+        {
+            offsetExtrusionWidth(part->insets[i-1], true, line_width_x, part->insets[i], &part->perimeterGaps, avoidOverlappingPerimeters);
+        }
+            
+        optimizePolygons(part->insets[i]);
+        if (part->insets[i].size() < 1)
+        {
+            part->insets.pop_back();
+            break;
+        }
+    }
+}
+
+
+void generateInsets(SliceLayer* layer, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters)
+{
+    for(unsigned int partNr = 0; partNr < layer->parts.size(); partNr++)
+    {
+        generateInsets(&layer->parts[partNr], line_width_0, line_width_x, insetCount, avoidOverlappingPerimeters);
+    }
+    
+    //Remove the parts which did not generate an inset. As these parts are too small to print,
+    // and later code can now assume that there is always minimal 1 inset line.
+    for(unsigned int partNr = 0; partNr < layer->parts.size(); partNr++)
+    {
+        if (layer->parts[partNr].insets.size() < 1)
+        {
+            layer->parts.erase(layer->parts.begin() + partNr);
+            partNr -= 1;
+        }
+    }
+}
+
+}//namespace cura

src/inset.h

@@ -0,0 +1,34 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef INSET_H
+#define INSET_H
+
+#include "sliceDataStorage.h"
+
+namespace cura 
+{
+
+/*!
+ * Generates the insets / perimeters for a single layer part.
+ * 
+ * \param part The part for which to generate the insets.
+ * \param line_width_0 Line width of the outer wall
+ * \param line_width_x Line width of other walls
+ * \param insetCount The number of insets to to generate
+ * \param avoidOverlappingPerimeters Whether to remove the parts of two consecutive perimeters where they have overlap (and store the gaps thus created in the \p part)
+ */
+void generateInsets(SliceLayerPart* part, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters);
+
+/*!
+ * Generates the insets / perimeters for all parts in a layer.
+ * 
+ * \param layer The layer for which to generate the insets.
+ * \param line_width_0 Line width of the outer wall
+ * \param line_width_x Line width of other walls
+ * \param insetCount The number of insets to to generate
+ * \param avoidOverlappingPerimeters Whether to remove the parts of two consecutive perimeters where they have overlap (and store the gaps thus created in the \p part)
+ */ 
+void generateInsets(SliceLayer* layer, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters);
+
+}//namespace cura
+
+#endif//INSET_H

src/layerPart.cpp

@@ -1,92 +1,89 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include <stdio.h>
-
-#include "layerPart.h"
-#include "settings.h"
-
-/*
-The layer-part creation step is the first step in creating actual useful data for 3D printing.
-It takes the result of the Slice step, which is an unordered list of polygons, and makes groups of polygons,
-each of these groups is called a "part", which sometimes are also known as "islands". These parts represent
-isolated areas in the 2D layer with possible holes.
-
-Creating "parts" is an important step, as all elements in a single part should be printed before going to another part.
-And all every bit inside a single part can be printed without the nozzle leaving the boundery of this part.
-
-It's also the first step that stores the result in the "data storage" so all other steps can access it.
-*/
-
-
-void createLayerWithParts(SliceLayer& storageLayer, SlicerLayer* layer, int unionAllType)
-{
-    if (unionAllType & FIX_HORRIBLE_UNION_ALL_TYPE_B)
-    {
-        for(unsigned int i=0; i<layer->polygonList.size(); i++)
-        {
-            if (layer->polygonList[i].orientation())
-                layer->polygonList[i].reverse();
-        }
-    }
-    
-    vector<Polygons> result;
-    if (unionAllType & FIX_HORRIBLE_UNION_ALL_TYPE_C)
-        result = layer->polygonList.offset(1000).splitIntoParts(unionAllType);
-    else
-        result = layer->polygonList.splitIntoParts(unionAllType);
-    for(unsigned int i=0; i<result.size(); i++)
-    {
-        storageLayer.parts.push_back(SliceLayerPart());
-        if (unionAllType & FIX_HORRIBLE_UNION_ALL_TYPE_C)
-        {
-            storageLayer.parts[i].outline.add(result[i][0]);
-            storageLayer.parts[i].outline = storageLayer.parts[i].outline.offset(-1000);
-        }else
-            storageLayer.parts[i].outline = result[i];
-        storageLayer.parts[i].boundaryBox.calculate(storageLayer.parts[i].outline);
-    }
-}
-
-void createLayerParts(SliceVolumeStorage& storage, Slicer* slicer, int unionAllType)
-{
-    for(unsigned int layerNr = 0; layerNr < slicer->layers.size(); layerNr++)
-    {
-        storage.layers.push_back(SliceLayer());
-        storage.layers[layerNr].sliceZ = slicer->layers[layerNr].z;
-        storage.layers[layerNr].printZ = slicer->layers[layerNr].z;
-        createLayerWithParts(storage.layers[layerNr], &slicer->layers[layerNr], unionAllType);
-    }
-}
-
-void dumpLayerparts(SliceDataStorage& storage, const char* filename)
-{
-    FILE* out = fopen(filename, "w");
-    fprintf(out, "<!DOCTYPE html><html><body>");
-    Point3 modelSize = storage.modelSize;
-    Point3 modelMin = storage.modelMin;
-    
-    for(unsigned int volumeIdx=0; volumeIdx<storage.volumes.size(); volumeIdx++)
-    {
-        for(unsigned int layerNr=0;layerNr<storage.volumes[volumeIdx].layers.size(); layerNr++)
-        {
-            fprintf(out, "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width: 500px; height:500px\">\n");
-            SliceLayer* layer = &storage.volumes[volumeIdx].layers[layerNr];
-            for(unsigned int i=0;i<layer->parts.size();i++)
-            {
-                SliceLayerPart* part = &layer->parts[i];
-                for(unsigned int j=0;j<part->outline.size();j++)
-                {
-                    fprintf(out, "<polygon points=\"");
-                    for(unsigned int k=0;k<part->outline[j].size();k++)
-                        fprintf(out, "%f,%f ", float(part->outline[j][k].X - modelMin.x)/modelSize.x*500, float(part->outline[j][k].Y - modelMin.y)/modelSize.y*500);
-                    if (j == 0)
-                        fprintf(out, "\" style=\"fill:gray; stroke:black;stroke-width:1\" />\n");
-                    else
-                        fprintf(out, "\" style=\"fill:red; stroke:black;stroke-width:1\" />\n");
-                }
-            }
-            fprintf(out, "</svg>\n");
-        }
-    }
-    fprintf(out, "</body></html>");
-    fclose(out);
-}
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include <stdio.h>
+
+#include "layerPart.h"
+#include "settings.h"
+
+/*
+The layer-part creation step is the first step in creating actual useful data for 3D printing.
+It takes the result of the Slice step, which is an unordered list of polygons, and makes groups of polygons,
+each of these groups is called a "part", which sometimes are also known as "islands". These parts represent
+isolated areas in the 2D layer with possible holes.
+
+Creating "parts" is an important step, as all elements in a single part should be printed before going to another part.
+And all every bit inside a single part can be printed without the nozzle leaving the boundery of this part.
+
+It's also the first step that stores the result in the "data storage" so all other steps can access it.
+*/
+
+namespace cura {
+
+void createLayerWithParts(SliceLayer& storageLayer, SlicerLayer* layer, bool union_layers, bool union_all_remove_holes)
+{
+    storageLayer.openLines = layer->openPolygons;
+
+    if (union_all_remove_holes)
+    {
+        for(unsigned int i=0; i<layer->polygonList.size(); i++)
+        {
+            if (layer->polygonList[i].orientation())
+                layer->polygonList[i].reverse();
+        }
+    }
+    
+    std::vector<Polygons> result;
+    result = layer->polygonList.splitIntoParts(union_layers || union_all_remove_holes);
+    for(unsigned int i=0; i<result.size(); i++)
+    {
+        storageLayer.parts.push_back(SliceLayerPart());
+        storageLayer.parts[i].outline = result[i];
+        storageLayer.parts[i].boundaryBox.calculate(storageLayer.parts[i].outline);
+    }
+}
+
+void createLayerParts(SliceMeshStorage& storage, Slicer* slicer, bool union_layers, bool union_all_remove_holes)
+{
+    for(unsigned int layer_nr = 0; layer_nr < slicer->layers.size(); layer_nr++)
+    {
+        storage.layers.push_back(SliceLayer());
+        storage.layers[layer_nr].sliceZ = slicer->layers[layer_nr].z;
+        storage.layers[layer_nr].printZ = slicer->layers[layer_nr].z;
+        createLayerWithParts(storage.layers[layer_nr], &slicer->layers[layer_nr], union_layers, union_all_remove_holes);
+        
+        logProgress("layerparts", layer_nr + 1, slicer->layers.size());
+    }
+}
+
+void dumpLayerparts(SliceDataStorage& storage, const char* filename)
+{
+    FILE* out = fopen(filename, "w");
+    fprintf(out, "<!DOCTYPE html><html><body>");
+    Point3 modelSize = storage.model_size;
+    Point3 modelMin = storage.model_min;
+    
+    for(SliceMeshStorage& mesh : storage.meshes)
+    {
+        for(SliceLayer& layer : mesh.layers)
+        {
+            fprintf(out, "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width: 500px; height:500px\">\n");
+            for(SliceLayerPart& part : layer.parts)
+            {
+                for(unsigned int j=0;j<part.outline.size();j++)
+                {
+                    fprintf(out, "<polygon points=\"");
+                    for(unsigned int k=0;k<part.outline[j].size();k++)
+                        fprintf(out, "%f,%f ", float(part.outline[j][k].X - modelMin.x)/modelSize.x*500, float(part.outline[j][k].Y - modelMin.y)/modelSize.y*500);
+                    if (j == 0)
+                        fprintf(out, "\" style=\"fill:gray; stroke:black;stroke-width:1\" />\n");
+                    else
+                        fprintf(out, "\" style=\"fill:red; stroke:black;stroke-width:1\" />\n");
+                }
+            }
+            fprintf(out, "</svg>\n");
+        }
+    }
+    fprintf(out, "</body></html>");
+    fclose(out);
+}
+
+}//namespace cura

src/layerPart.h

@@ -1,27 +1,30 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef LAYERPART_H
-#define LAYERPART_H
-
-#include "sliceDataStorage.h"
-#include "slicer.h"
-
-/*
-The layer-part creation step is the first step in creating actual useful data for 3D printing.
-It takes the result of the Slice step, which is an unordered list of polygons, and makes groups of polygons,
-each of these groups is called a "part", which sometimes are also known as "islands". These parts represent
-isolated areas in the 2D layer with possible holes.
-
-Creating "parts" is an important step, as all elements in a single part should be printed before going to another part.
-And all every bit inside a single part can be printed without the nozzle leaving the boundery of this part.
-
-It's also the first step that stores the result in the "data storage" so all other steps can access it.
-*/
-
-
-void createLayerWithParts(SliceLayer& storageLayer, SlicerLayer* layer, int unionAllType);
-
-void createLayerParts(SliceVolumeStorage& storage, Slicer* slicer, int unionAllType);
-
-void dumpLayerparts(SliceDataStorage& storage, const char* filename);
-
-#endif//LAYERPART_H
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef LAYERPART_H
+#define LAYERPART_H
+
+#include "sliceDataStorage.h"
+#include "slicer.h"
+
+/*
+The layer-part creation step is the first step in creating actual useful data for 3D printing.
+It takes the result of the Slice step, which is an unordered list of polygons, and makes groups of polygons,
+each of these groups is called a "part", which sometimes are also known as "islands". These parts represent
+isolated areas in the 2D layer with possible holes.
+
+Creating "parts" is an important step, as all elements in a single part should be printed before going to another part.
+And all every bit inside a single part can be printed without the nozzle leaving the boundery of this part.
+
+It's also the first step that stores the result in the "data storage" so all other steps can access it.
+*/
+
+namespace cura {
+
+void createLayerWithParts(SliceLayer& storageLayer, SlicerLayer* layer, bool union_layers, bool union_all_remove_holes);
+
+void createLayerParts(SliceMeshStorage& storage, Slicer* slicer, bool union_layers, bool union_all_remove_holes);
+
+void dumpLayerparts(SliceDataStorage& storage, const char* filename);
+
+}//namespace cura
+
+#endif//LAYERPART_H

src/main.cpp

@@ -0,0 +1,210 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/time.h>
+#include <signal.h>
+#if defined(__linux__) || (defined(__APPLE__) && defined(__MACH__))
+#include <execinfo.h>
+#include <sys/resource.h>
+#endif
+#include <stddef.h>
+#include <vector>
+
+#include "utils/gettime.h"
+#include "utils/logoutput.h"
+#include "utils/string.h"
+#include "sliceDataStorage.h"
+
+#include "modelFile/modelFile.h"
+#include "settings.h"
+#include "settingRegistry.h"
+#include "multiVolumes.h"
+#include "polygonOptimizer.h"
+#include "slicer.h"
+#include "layerPart.h"
+#include "inset.h"
+#include "skin.h"
+#include "infill.h"
+#include "bridge.h"
+#include "support.h"
+#include "pathOrderOptimizer.h"
+#include "skirt.h"
+#include "raft.h"
+#include "comb.h"
+#include "gcodeExport.h"
+#include "fffProcessor.h"
+
+void print_usage()
+{
+    cura::logError("usage: CuraEngine [-h] [-v] [-m 3x3matrix] [-c <config file>] [-s <settingkey>=<value>] -o <output.gcode> <model.stl>\n");
+}
+
+//Signal handler for a "floating point exception", which can also be integer division by zero errors.
+void signal_FPE(int n)
+{
+    (void)n;
+    cura::logError("Arithmetic exception.\n");
+    exit(1);
+}
+
+using namespace cura;
+
+int main(int argc, char **argv)
+{
+#if defined(__linux__) || (defined(__APPLE__) && defined(__MACH__))
+    //Lower the process priority on linux and mac. On windows this is done on process creation from the GUI.
+    setpriority(PRIO_PROCESS, 0, 10);
+#endif
+
+#ifndef DEBUG
+    //Register the exception handling for arithmic exceptions, this prevents the "something went wrong" dialog on windows to pop up on a division by zero.
+    signal(SIGFPE, signal_FPE);
+#endif
+
+    fffProcessor processor;
+    std::vector<std::string> files;
+
+    logCopyright("Cura_SteamEngine version %s\n", VERSION);
+    logCopyright("Copyright (C) 2014 David Braam\n");
+    logCopyright("\n");
+    logCopyright("This program is free software: you can redistribute it and/or modify\n");
+    logCopyright("it under the terms of the GNU Affero General Public License as published by\n");
+    logCopyright("the Free Software Foundation, either version 3 of the License, or\n");
+    logCopyright("(at your option) any later version.\n");
+    logCopyright("\n");
+    logCopyright("This program is distributed in the hope that it will be useful,\n");
+    logCopyright("but WITHOUT ANY WARRANTY; without even the implied warranty of\n");
+    logCopyright("MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n");
+    logCopyright("GNU Affero General Public License for more details.\n");
+    logCopyright("\n");
+    logCopyright("You should have received a copy of the GNU Affero General Public License\n");
+    logCopyright("along with this program.  If not, see <http://www.gnu.org/licenses/>.\n");
+
+    CommandSocket* commandSocket = NULL;
+    std::string ip;
+    int port = 49674;
+
+    for(int argn = 1; argn < argc; argn++)
+    {
+        char* str = argv[argn];
+        if (str[0] == '-')
+        {
+            if (str[1] == '-')
+            {
+                if (stringcasecompare(str, "--connect") == 0)
+                {
+                    commandSocket = new CommandSocket(&processor);
+
+                    std::string ip_port(argv[argn + 1]);
+                    if (ip_port.find(':') != std::string::npos)
+                    {
+                        ip = ip_port.substr(0, ip_port.find(':'));
+                        port = std::stoi(ip_port.substr(ip_port.find(':') + 1).data());
+                    }
+
+                    argn += 1;
+                }
+                else if (stringcasecompare(str, "--") == 0)
+                {
+                    try {
+                        //Catch all exceptions, this prevents the "something went wrong" dialog on windows to pop up on a thrown exception.
+                        // Only ClipperLib currently throws exceptions. And only in case that it makes an internal error.
+                        if (files.size() > 0)
+                            processor.processFiles(files);
+                        files.clear();
+                    }catch(...){
+                        cura::logError("Unknown exception\n");
+                        exit(1);
+                    }
+                    break;
+                }else{
+                    cura::logError("Unknown option: %s\n", str);
+                }
+            }else{
+                for(str++; *str; str++)
+                {
+                    switch(*str)
+                    {
+                    case 'h':
+                        print_usage();
+                        exit(1);
+                    case 'v':
+                        cura::increaseVerboseLevel();
+                        break;
+                    case 'j':
+                        argn++;
+                        if (!SettingRegistry::getInstance()->loadJSON(argv[argn]))
+                        {
+                            cura::logError("ERROR: Failed to load json file: %s\n", argv[argn]);
+                        }
+                        break;
+                    case 'p':
+                        cura::enableProgressLogging();
+                        break;
+                    case 'o':
+                        argn++;
+                        if (!processor.setTargetFile(argv[argn]))
+                        {
+                            cura::logError("Failed to open %s for output.\n", argv[argn]);
+                            exit(1);
+                        }
+                        break;
+                    case 's':
+                        {
+                            //Parse the given setting and store it.
+                            argn++;
+                            char* valuePtr = strchr(argv[argn], '=');
+                            if (valuePtr)
+                            {
+                                *valuePtr++ = '\0';
+
+                                processor.setSetting(argv[argn], valuePtr);
+                            }
+                        }
+                        break;
+                    default:
+                        cura::logError("Unknown option: %c\n", *str);
+                        break;
+                    }
+                }
+            }
+        }else{
+            files.push_back(argv[argn]);
+        }
+    }
+
+    if (!SettingRegistry::getInstance()->settingsLoaded())
+    {
+        //If no json file has been loaded, try to load the default.
+        if (!SettingRegistry::getInstance()->loadJSON("fdmprinter.json"))
+        {
+            logError("ERROR: Failed to load json file: fdmprinter.json\n");
+        }
+    }
+        
+    if(commandSocket)
+    {
+        commandSocket->connect(ip, port);
+    }
+    else
+    {
+#ifndef DEBUG
+        try {
+#endif
+            //Catch all exceptions, this prevents the "something went wrong" dialog on windows to pop up on a thrown exception.
+            // Only ClipperLib currently throws exceptions. And only in case that it makes an internal error.
+            if (files.size() > 0)
+                processor.processFiles(files);
+#ifndef DEBUG
+        }catch(...){
+            cura::logError("Unknown exception\n");
+            exit(1);
+        }
+#endif
+        //Finalize the processor, this adds the end.gcode. And reports statistics.
+        processor.finalize();
+    }
+    
+    return 0;
+}

src/mesh.cpp

@@ -0,0 +1,193 @@
+#include "mesh.h"
+#include "utils/logoutput.h"
+
+
+const int vertex_meld_distance = MM2INT(0.03);
+static inline uint32_t pointHash(Point3& p)
+{
+    return ((p.x + vertex_meld_distance/2) / vertex_meld_distance) ^ (((p.y + vertex_meld_distance/2) / vertex_meld_distance) << 10) ^ (((p.z + vertex_meld_distance/2) / vertex_meld_distance) << 20);
+}
+
+Mesh::Mesh(SettingsBase* parent)
+: SettingsBase(parent)
+{
+}
+
+void Mesh::addFace(Point3& v0, Point3& v1, Point3& v2)
+{
+    int vi0 = findIndexOfVertex(v0);
+    int vi1 = findIndexOfVertex(v1);
+    int vi2 = findIndexOfVertex(v2);
+    if (vi0 == vi1 || vi1 == vi2 || vi0 == vi2) return; // the face has two vertices which get assigned the same location. Don't add the face.
+
+    int idx = faces.size(); // index of face to be added
+    faces.emplace_back();
+    MeshFace& face = faces[idx];
+    face.vertex_index[0] = vi0;
+    face.vertex_index[1] = vi1;
+    face.vertex_index[2] = vi2;
+    vertices[face.vertex_index[0]].connected_faces.push_back(idx);
+    vertices[face.vertex_index[1]].connected_faces.push_back(idx);
+    vertices[face.vertex_index[2]].connected_faces.push_back(idx);
+}
+
+void Mesh::clear()
+{
+    faces.clear();
+    vertices.clear();
+    vertex_hash_map.clear();
+}
+
+void Mesh::finish()
+{
+    // Finish up the mesh, clear the vertex_hash_map, as it's no longer needed from this point on and uses quite a bit of memory.
+    vertex_hash_map.clear();
+
+    // For each face, store which other face is connected with it.
+    for(unsigned int i=0; i<faces.size(); i++)
+    {
+        MeshFace& face = faces[i];
+        face.connected_face_index[0] = getFaceIdxWithPoints(face.vertex_index[0], face.vertex_index[1], i); // faces are connected via the outside
+        face.connected_face_index[1] = getFaceIdxWithPoints(face.vertex_index[1], face.vertex_index[2], i);
+        face.connected_face_index[2] = getFaceIdxWithPoints(face.vertex_index[2], face.vertex_index[0], i);
+    }
+}
+
+Point3 Mesh::min()
+{
+    if (vertices.size() < 1)
+        return Point3(0, 0, 0);
+    Point3 ret = vertices[0].p;
+    for(unsigned int i=0; i<vertices.size(); i++)
+    {
+        ret.x = std::min(ret.x, vertices[i].p.x);
+        ret.y = std::min(ret.y, vertices[i].p.y);
+        ret.z = std::min(ret.z, vertices[i].p.z);
+    }
+    return ret;
+}
+Point3 Mesh::max()
+{
+    if (vertices.size() < 1)
+        return Point3(0, 0, 0);
+    Point3 ret = vertices[0].p;
+    for(unsigned int i=0; i<vertices.size(); i++)
+    {
+        ret.x = std::max(ret.x, vertices[i].p.x);
+        ret.y = std::max(ret.y, vertices[i].p.y);
+        ret.z = std::max(ret.z, vertices[i].p.z);
+    }
+    return ret;
+}
+
+int Mesh::findIndexOfVertex(Point3& v)
+{
+    uint32_t hash = pointHash(v);
+
+    for(unsigned int idx = 0; idx < vertex_hash_map[hash].size(); idx++)
+    {
+        if ((vertices[vertex_hash_map[hash][idx]].p - v).testLength(vertex_meld_distance))
+        {
+            return vertex_hash_map[hash][idx];
+        }
+    }
+    vertex_hash_map[hash].push_back(vertices.size());
+    vertices.emplace_back(v);
+    return vertices.size() - 1;
+}
+
+/*!
+Returns the index of the 'other' face connected to the edge between vertices with indices idx0 and idx1.
+In case more than two faces are connected via the same edge, the next face in a counter-clockwise ordering (looking from idx1 to idx0) is returned.
+
+\cond DOXYGEN_EXCLUDE
+    [NON-RENDERED COMENTS]
+    For two faces abc and abd with normals n and m, we have that:
+    \f{eqnarray*}{
+    n &=& \frac{ab \times ac}{\|ab \times ac\|}     \\
+    m &=& \frac{ab \times ad}{\|ab \times ad\|}     \\
+    n \times m &=& \|n\| \cdot \|m\| \mathbf{p} \sin \alpha  \\
+    && (\mathbf{p} \perp n \wedge \mathbf{p} \perp m) \\
+    \sin \alpha &=& \|n \times m \|
+    &=& \left\| \frac{(ab \times ac) \times (ab \times ad)}{\|ab \times ac\| \cdot \|ab \times ad\|}  \right\|    \\
+    &=& \left\| \frac{ (ab \cdot (ac \times ad)) ab  }{\|ab \times ac\| \cdot \|ab \times ad\|}  \right\|    \\
+    &=&  \frac{ (ab \cdot (ac \times ad)) \left\| ab   \right\| }{\|ab\| \|ac\| \sin bac \cdot \|ab\| \|ad\| \sin bad}    \\
+    &=&  \frac{  ab \cdot (ac \times ad)  }{\|ab\| \|ac\| \|ad\|  \sin bac \sin bad}    \\
+    \f}}
+\endcond
+
+See <a href="http://stackoverflow.com/questions/14066933/direct-way-of-computing-clockwise-angle-between-2-vectors">Direct way of computing clockwise angle between 2 vectors</a>
+
+
+*/
+int Mesh::getFaceIdxWithPoints(int idx0, int idx1, int notFaceIdx)
+{
+    std::vector<int> candidateFaces; // in case more than two faces meet at an edge, multiple candidates are generated
+    int notFaceVertexIdx = -1; // index of the third vertex of the face corresponding to notFaceIdx
+    for(int f : vertices[idx0].connected_faces) // search through all faces connected to the first vertex and find those that are also connected to the second
+    {
+        if (f == notFaceIdx)
+        {
+            for (int i = 0; i<3; i++) // find the vertex which is not idx0 or idx1
+                if (faces[f].vertex_index[i] != idx0 && faces[f].vertex_index[i] != idx1)
+                    notFaceVertexIdx = faces[f].vertex_index[i];
+            continue;
+        }
+        if ( faces[f].vertex_index[0] == idx1 // && faces[f].vertex_index[1] == idx0 // next face should have the right direction!
+          || faces[f].vertex_index[1] == idx1 // && faces[f].vertex_index[2] == idx0
+          || faces[f].vertex_index[2] == idx1 // && faces[f].vertex_index[0] == idx0
+            )  candidateFaces.push_back(f);
+
+    }
+
+    if (candidateFaces.size() == 0) { cura::logError("Couldn't find face connected to face %i.\n", notFaceIdx); return -1; }
+    if (candidateFaces.size() == 1) { return candidateFaces[0]; }
+
+
+    if (notFaceVertexIdx < 0) { cura::logError("Couldn't find third point on face %i.\n", notFaceIdx); return -1; }
+
+    if (candidateFaces.size() % 2 == 0) cura::log("Warning! Edge with uneven number of faces connecting it!(%i)\n", candidateFaces.size()+1);
+
+    FPoint3 vn = vertices[idx1].p - vertices[idx0].p;
+    FPoint3 n = vn / vn.vSize(); // the normal of the plane in which all normals of faces connected to the edge lie => the normalized normal
+    FPoint3 v0 = vertices[idx1].p - vertices[idx0].p;
+
+// the normals below are abnormally directed! : these normals all point counterclockwise (viewed from idx1 to idx0) from the face, irrespective of the direction of the face.
+    FPoint3 n0 = FPoint3(vertices[notFaceVertexIdx].p - vertices[idx0].p).cross(v0);
+
+    if (n0.vSize() <= 0) cura::log("Warning! Face %i has zero area!", notFaceIdx);
+
+    double smallestAngle = 1000; // more then 2 PI (impossible angle)
+    int bestIdx = -1;
+
+    for (int candidateFace : candidateFaces)
+    {
+        int candidateVertex;
+        {// find third vertex belonging to the face (besides idx0 and idx1)
+            for (candidateVertex = 0; candidateVertex<3; candidateVertex++)
+                if (faces[candidateFace].vertex_index[candidateVertex] != idx0 && faces[candidateFace].vertex_index[candidateVertex] != idx1)
+                    break;
+        }
+
+        FPoint3 v1 = vertices[candidateVertex].p -vertices[idx0].p;
+        FPoint3 n1 = v1.cross(v0);
+
+        double dot = n0 * n1;
+        double det = n * n0.cross(n1);
+        double angle = std::atan2(det, dot);
+        if (angle < 0) angle += 2*M_PI; // 0 <= angle < 2* M_PI
+
+        if (angle == 0)
+        {
+            cura::log("Warning! Overlapping faces: face %i and face %i.\n", notFaceIdx, candidateFace);
+            std::cerr<< n.vSize() <<"; "<<n1.vSize()<<";"<<n0.vSize() <<std::endl;
+        }
+        if (angle < smallestAngle)
+        {
+            smallestAngle = angle;
+            bestIdx = candidateFace;
+        }
+    }
+    if (bestIdx < 0) cura::logError("Couldn't find face connected to face %i.\n", notFaceIdx);
+    return bestIdx;
+}

src/mesh.h

@@ -0,0 +1,82 @@
+#ifndef MESH_H
+#define MESH_H
+
+#include "settings.h"
+
+/*!
+Vertex type to be used in a Mesh.
+
+Keeps track of which faces connect to it.
+*/
+class MeshVertex
+{
+public:
+    Point3 p; //!< location of the vertex
+    std::vector<uint32_t> connected_faces; //!< list of the indices of connected faces
+
+    MeshVertex(Point3 p) : p(p) {} //!< doesn't set connected_faces
+};
+
+/*! A MeshFace is a 3 dimensional model triangle with 3 points. These points are already converted to integers
+
+A face has 3 connected faces, corresponding to its 3 edges.
+
+Note that a correct model may have more than 2 faces connected via a single edge!
+In such a case the face_index stored in connected_face_index is the one connected via the outside; see ASCII art below:
+
+: horizontal slice through vertical edge connected to four faces :
+
+\verbatim
+[inside] x|
+         x| <--+--- faces which contain each other in their connected_face_index fiels
+   xxxxxxx|   \|/
+   -------+-------
+      ^   |xxxxxxx
+      +-->|x
+      |   |x [inside]
+      |
+    faces which contain each other in their connected_face_index fiels
+\endverbatim
+*/
+class MeshFace
+{
+public:
+    int vertex_index[3] = {-1}; //!< counter-clockwise ordering
+    int connected_face_index[3]; //!< same ordering as vertex_index (connected_face 0 is connected via vertex 0 and 1, etc.)
+};
+
+
+/*!
+A Mesh is the most basic representation of a 3D model. It contains all the faces as MeshFaces.
+
+See MeshFace for the specifics of how/when faces are connected.
+*/
+class Mesh : public SettingsBase // inherits settings
+{
+    //! The vertex_hash_map stores a index reference of each vertex for the hash of that location. Allows for quick retrieval of points with the same location.
+    std::map<uint32_t, std::vector<uint32_t> > vertex_hash_map;
+public:
+    std::vector<MeshVertex> vertices;//!< list of all vertices in the mesh
+    std::vector<MeshFace> faces; //!< list of all faces in the mesh
+
+    Mesh(SettingsBase* parent); //!< initializes the settings
+
+    void addFace(Point3& v0, Point3& v1, Point3& v2); //!< add a face to the mesh without settings it's connected_faces.
+    void clear(); //!< clears all data
+    void finish(); //!< complete the model : set the connected_face_index fields of the faces.
+
+    Point3 min(); //!< min (in x,y and z) vertex of the bounding box
+    Point3 max(); //!< max (in x,y and z) vertex of the bounding box
+
+private:
+    int findIndexOfVertex(Point3& v); //!< find index of vertex close to the given point, or create a new vertex and return its index.
+    /*!
+    Get the index of the face connected to the face with index \p notFaceIdx, via vertices \p idx0 and \p idx1.
+    In case multiple faces connect with the same edge, return the next counter-clockwise face when viewing from \p idx1 to \p idx0.
+    */
+    int getFaceIdxWithPoints(int idx0, int idx1, int notFaceIdx);
+};
+
+
+#endif//MESH_H
+

src/modelFile/modelFile.cpp

@@ -0,0 +1,150 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include <string.h>
+#include <strings.h>
+#include <stdio.h>
+
+#include "modelFile.h"
+#include "../utils/logoutput.h"
+#include "../utils/string.h"
+
+FILE* binaryMeshBlob = nullptr;
+
+/* Custom fgets function to support Mac line-ends in Ascii STL files. OpenSCAD produces this when used on Mac */
+void* fgets_(char* ptr, size_t len, FILE* f)
+{
+    while(len && fread(ptr, 1, 1, f) > 0)
+    {
+        if (*ptr == '\n' || *ptr == '\r')
+        {
+            *ptr = '\0';
+            return ptr;
+        }
+        ptr++;
+        len--;
+    }
+    return nullptr;
+}
+
+bool loadModelSTL_ascii(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
+{
+    FILE* f = fopen(filename, "rt");
+    char buffer[1024];
+    FPoint3 vertex;
+    int n = 0;
+    Point3 v0(0,0,0), v1(0,0,0), v2(0,0,0);
+    while(fgets_(buffer, sizeof(buffer), f))
+    {
+        if (sscanf(buffer, " vertex %f %f %f", &vertex.x, &vertex.y, &vertex.z) == 3)
+        {
+            n++;
+            switch(n)
+            {
+            case 1:
+                v0 = matrix.apply(vertex);
+                break;
+            case 2:
+                v1 = matrix.apply(vertex);
+                break;
+            case 3:
+                v2 = matrix.apply(vertex);
+                mesh->addFace(v0, v1, v2);
+                n = 0;
+                break;
+            }
+        }
+    }
+    fclose(f);
+    mesh->finish();
+    return true;
+}
+
+bool loadModelSTL_binary(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
+{
+    FILE* f = fopen(filename, "rb");
+    char buffer[80];
+    uint32_t faceCount;
+    //Skip the header
+    if (fread(buffer, 80, 1, f) != 1)
+    {
+        fclose(f);
+        return false;
+    }
+    //Read the face count
+    if (fread(&faceCount, sizeof(uint32_t), 1, f) != 1)
+    {
+        fclose(f);
+        return false;
+    }
+    //For each face read:
+    //float(x,y,z) = normal, float(X,Y,Z)*3 = vertexes, uint16_t = flags
+    for(unsigned int i=0;i<faceCount;i++)
+    {
+        if (fread(buffer, sizeof(float) * 3, 1, f) != 1)
+        {
+            fclose(f);
+            return false;
+        }
+        float v[9];
+        if (fread(v, sizeof(float) * 9, 1, f) != 1)
+        {
+            fclose(f);
+            return false;
+        }
+        Point3 v0 = matrix.apply(FPoint3(v[0], v[1], v[2]));
+        Point3 v1 = matrix.apply(FPoint3(v[3], v[4], v[5]));
+        Point3 v2 = matrix.apply(FPoint3(v[6], v[7], v[8]));
+        mesh->addFace(v0, v1, v2);
+        if (fread(buffer, sizeof(uint16_t), 1, f) != 1)
+        {
+            fclose(f);
+            return false;
+        }
+    }
+    fclose(f);
+    mesh->finish();
+    return true;
+}
+
+bool loadModelSTL(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
+{
+    FILE* f = fopen(filename, "r");
+    char buffer[6];
+    if (f == nullptr)
+        return false;
+
+    if (fread(buffer, 5, 1, f) != 1)
+    {
+        fclose(f);
+        return false;
+    }
+    fclose(f);
+
+    buffer[5] = '\0';
+    if (stringcasecompare(buffer, "solid") == 0)
+    {
+        bool load_success = loadModelSTL_ascii(mesh, filename, matrix);
+        if (!load_success)
+            return false;
+
+        // This logic is used to handle the case where the file starts with
+        // "solid" but is a binary file.
+        if (mesh->faces.size() < 1)
+        {
+            mesh->clear();
+            return loadModelSTL_binary(mesh, filename, matrix);
+        }
+        return true;
+    }
+    return loadModelSTL_binary(mesh, filename, matrix);
+}
+
+bool loadMeshFromFile(PrintObject* object, const char* filename, FMatrix3x3& matrix)
+{
+    const char* ext = strrchr(filename, '.');
+    if (ext && (strcmp(ext, ".stl") == 0 || strcmp(ext, ".STL") == 0))
+    {
+        object->meshes.emplace_back(object);
+        return loadModelSTL(&object->meshes[object->meshes.size()-1], filename, matrix);
+    }
+    return false;
+}

src/modelFile/modelFile.h

@@ -0,0 +1,98 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef MODELFILE_H
+#define MODELFILE_H
+/**
+modelFile contains the model loaders for the slicer. The model loader turns any format that it can read into a list of triangles with 3 X/Y/Z points.
+
+The format returned is a Model class with an array of faces, which have integer points with a resolution of 1 micron. Giving a maximum object size of 4 meters.
+**/
+
+#include "../mesh.h"
+
+//A PrintObject is a 3D model with 1 or more 3D meshes.
+class PrintObject : public SettingsBase
+{
+public:
+    std::vector<Mesh> meshes;
+
+    PrintObject(SettingsBase* settings_base)
+    : SettingsBase(settings_base)
+    {
+    }
+
+    Point3 min() //! minimal corner of bounding box
+    {
+        if (meshes.size() < 1)
+            return Point3(0, 0, 0);
+        Point3 ret = meshes[0].min();
+        for(unsigned int i=1; i<meshes.size(); i++)
+        {
+            Point3 v = meshes[i].min();
+            ret.x = std::min(ret.x, v.x);
+            ret.y = std::min(ret.y, v.y);
+            ret.z = std::min(ret.z, v.z);
+        }
+        return ret;
+    }
+    Point3 max() //! maximal corner of bounding box
+    {
+        if (meshes.size() < 1)
+            return Point3(0, 0, 0);
+        Point3 ret = meshes[0].max();
+        for(unsigned int i=1; i<meshes.size(); i++)
+        {
+            Point3 v = meshes[i].max();
+            ret.x = std::max(ret.x, v.x);
+            ret.y = std::max(ret.y, v.y);
+            ret.z = std::max(ret.z, v.z);
+        }
+        return ret;
+    }
+
+    void clear()
+    {
+        for(Mesh& m : meshes)
+            m.clear();
+    }
+
+    void offset(Point3 offset)
+    {
+        for(Mesh& m : meshes)
+            for(MeshVertex& v : m.vertices)
+                v.p += offset;
+    }
+
+    void finalize()
+    {
+        // If a mesh position was given, put the mesh at this position in 3D space.
+        if (hasSetting("mesh_position_x") || hasSetting("mesh_position_y") || hasSetting("mesh_position_z"))
+        {
+            Point3 object_min = min();
+            Point3 object_max = max();
+            Point3 object_size = object_max - object_min;
+            Point3 object_offset = Point3(-object_min.x - object_size.x / 2, -object_min.y - object_size.y / 2, -object_min.z);
+            if (hasSetting("mesh_position_x"))
+                object_offset.x += getSettingInMicrons("mesh_position_x");
+            if (hasSetting("mesh_position_y"))
+                object_offset.y += getSettingInMicrons("mesh_position_y");
+            if (hasSetting("mesh_position_z"))
+                object_offset.z += getSettingInMicrons("mesh_position_z");
+            offset(object_offset);
+        }
+
+        //If the machine settings have been supplied, offset the given position vertices to the center of vertices (0,0,0) is at the bed center.
+        if (hasSetting("machine_center_is_zero") && !getSettingBoolean("machine_center_is_zero"))
+        {
+            Point3 object_offset = Point3(0, 0, 0);
+            if (hasSetting("machine_width"))
+                object_offset.x = getSettingInMicrons("machine_width") / 2;
+            if (hasSetting("machine_depth"))
+                object_offset.y = getSettingInMicrons("machine_depth") / 2;
+            offset(object_offset);
+        }
+    }
+};
+
+bool loadMeshFromFile(PrintObject* object, const char* filename, FMatrix3x3& matrix);
+
+#endif//MODELFILE_H

src/multiVolumes.cpp

@@ -1,59 +1,58 @@
-#ifndef MULTIVOLUMES_H
-#define MULTIVOLUMES_H
-
-/* This file contains code to help fixing up and changing layers that are build from multiple volumes. */
-
-void carveMultipleVolumes(vector<SliceVolumeStorage> &volumes)
-{
-    //Go trough all the volumes, and remove the previous volume outlines from our own outline, so we never have overlapped areas.
-    for(unsigned int idx=0; idx < volumes.size(); idx++)
-    {
-        for(unsigned int idx2=0; idx2<idx; idx2++)
-        {
-            for(unsigned int layerNr=0; layerNr < volumes[idx].layers.size(); layerNr++)
-            {
-                SliceLayer* layer1 = &volumes[idx].layers[layerNr];
-                SliceLayer* layer2 = &volumes[idx2].layers[layerNr];
-                for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
-                {
-                    for(unsigned int p2 = 0; p2 < layer2->parts.size(); p2++)
-                    {
-                        layer1->parts[p1].outline = layer1->parts[p1].outline.difference(layer2->parts[p2].outline);
-                    }
-                }
-            }
-        }
-    }
-}
-
-//Expand each layer a bit and then keep the extra overlapping parts that overlap with other volumes.
-//This generates some overlap in dual extrusion, for better bonding in touching parts.
-void generateMultipleVolumesOverlap(vector<SliceVolumeStorage> &volumes, int overlap)
-{
-    if (volumes.size() < 2 || overlap <= 0) return;
-    
-    for(unsigned int layerNr=0; layerNr < volumes[0].layers.size(); layerNr++)
-    {
-        Polygons fullLayer;
-        for(unsigned int volIdx = 0; volIdx < volumes.size(); volIdx++)
-        {
-            SliceLayer* layer1 = &volumes[volIdx].layers[layerNr];
-            for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
-            {
-                fullLayer = fullLayer.unionPolygons(layer1->parts[p1].outline.offset(20));
-            }
-        }
-        fullLayer = fullLayer.offset(-20);
-        
-        for(unsigned int volIdx = 0; volIdx < volumes.size(); volIdx++)
-        {
-            SliceLayer* layer1 = &volumes[volIdx].layers[layerNr];
-            for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
-            {
-                layer1->parts[p1].outline = fullLayer.intersection(layer1->parts[p1].outline.offset(overlap / 2));
-            }
-        }
-    }
-}
-
-#endif//MULTIVOLUMES_H
+#include "multiVolumes.h"
+
+namespace cura {
+
+void carveMultipleVolumes(std::vector<SliceMeshStorage> &volumes)
+{
+    //Go trough all the volumes, and remove the previous volume outlines from our own outline, so we never have overlapped areas.
+    for(unsigned int idx=0; idx < volumes.size(); idx++)
+    {
+        for(unsigned int idx2=0; idx2<idx; idx2++)
+        {
+            for(unsigned int layerNr=0; layerNr < volumes[idx].layers.size(); layerNr++)
+            {
+                SliceLayer* layer1 = &volumes[idx].layers[layerNr];
+                SliceLayer* layer2 = &volumes[idx2].layers[layerNr];
+                for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
+                {
+                    for(unsigned int p2 = 0; p2 < layer2->parts.size(); p2++)
+                    {
+                        layer1->parts[p1].outline = layer1->parts[p1].outline.difference(layer2->parts[p2].outline);
+                    }
+                }
+            }
+        }
+    }
+}
+
+//Expand each layer a bit and then keep the extra overlapping parts that overlap with other volumes.
+//This generates some overlap in dual extrusion, for better bonding in touching parts.
+void generateMultipleVolumesOverlap(std::vector<SliceMeshStorage> &volumes, int overlap)
+{
+    if (volumes.size() < 2 || overlap <= 0) return;
+    
+    for(unsigned int layerNr=0; layerNr < volumes[0].layers.size(); layerNr++)
+    {
+        Polygons fullLayer;
+        for(unsigned int volIdx = 0; volIdx < volumes.size(); volIdx++)
+        {
+            SliceLayer* layer1 = &volumes[volIdx].layers[layerNr];
+            for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
+            {
+                fullLayer = fullLayer.unionPolygons(layer1->parts[p1].outline.offset(20)); // TODO: put hard coded value in a variable with an explanatory name (and make var a parameter, and perhaps even a setting?)
+            }
+        }
+        fullLayer = fullLayer.offset(-20); // TODO: put hard coded value in a variable with an explanatory name (and make var a parameter, and perhaps even a setting?)
+        
+        for(unsigned int volIdx = 0; volIdx < volumes.size(); volIdx++)
+        {
+            SliceLayer* layer1 = &volumes[volIdx].layers[layerNr];
+            for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
+            {
+                layer1->parts[p1].outline = fullLayer.intersection(layer1->parts[p1].outline.offset(overlap / 2));
+            }
+        }
+    }
+}
+ 
+}//namespace cura

src/multiVolumes.h

@@ -0,0 +1,17 @@
+#ifndef MULTIVOLUMES_H
+#define MULTIVOLUMES_H
+
+#include "sliceDataStorage.h"
+
+/* This file contains code to help fixing up and changing layers that are build from multiple volumes. */
+namespace cura {
+
+void carveMultipleVolumes(std::vector<SliceMeshStorage> &meshes);
+
+//Expand each layer a bit and then keep the extra overlapping parts that overlap with other volumes.
+//This generates some overlap in dual extrusion, for better bonding in touching parts.
+void generateMultipleVolumesOverlap(std::vector<SliceMeshStorage> &meshes, int overlap);
+
+}//namespace cura
+
+#endif//MULTIVOLUMES_H

src/pathOrderOptimizer.cpp

@@ -0,0 +1,246 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include <map>
+
+#include "pathOrderOptimizer.h"
+#include "utils/logoutput.h"
+#include "utils/BucketGrid2D.h"
+
+#define INLINE static inline
+
+namespace cura {
+
+/**
+*
+*/
+void PathOrderOptimizer::optimize()
+{
+    bool picked[polygons.size()];
+    memset(picked, false, sizeof(bool) * polygons.size());/// initialized as falses
+    
+    for(unsigned int i_polygon=0 ; i_polygon<polygons.size() ; i_polygon++) /// find closest point to initial starting point within each polygon +initialize picked
+    {
+        int best = -1;
+        float bestDist = std::numeric_limits<float>::infinity();
+        PolygonRef poly = polygons[i_polygon];
+        for(unsigned int i_point=0; i_point<poly.size(); i_point++) /// get closest point in polygon
+        {
+            float dist = vSize2f(poly[i_point] - startPoint);
+            if (dist < bestDist)
+            {
+                best = i_point;
+                bestDist = dist;
+            }
+        }
+        polyStart.push_back(best);
+        //picked.push_back(false); /// initialize all picked values as false
+
+        assert(poly.size() != 2);
+    }
+
+
+    Point prev_point = startPoint;
+    for(unsigned int i_polygon=0 ; i_polygon<polygons.size() ; i_polygon++) /// actual path order optimizer
+    {
+        int best = -1;
+        float bestDist = std::numeric_limits<float>::infinity();
+
+
+        for(unsigned int i_polygon=0 ; i_polygon<polygons.size() ; i_polygon++)
+        {
+            if (picked[i_polygon] || polygons[i_polygon].size() < 1) /// skip single-point-polygons
+                continue;
+
+            assert (polygons[i_polygon].size() != 2);
+
+            float dist = vSize2f(polygons[i_polygon][polyStart[i_polygon]] - prev_point);
+            if (dist < bestDist)
+            {
+                best = i_polygon;
+                bestDist = dist;
+            }
+
+        }
+
+
+        if (best > -1) /// should always be true; we should have been able to identify the best next polygon
+        {
+            assert(polygons[best].size() != 2);
+
+            prev_point = polygons[best][polyStart[best]];
+
+            picked[best] = true;
+            polyOrder.push_back(best);
+        }
+        else
+            logError("Failed to find next closest polygon.\n");
+    }
+
+    prev_point = startPoint;
+    for(unsigned int n=0; n<polyOrder.size(); n++) /// decide final starting points in each polygon
+    {
+        int i_polygon = polyOrder[n];
+        int best = getClosestPointInPolygon(prev_point, i_polygon);
+        polyStart[i_polygon] = best;
+        prev_point = polygons[i_polygon][best];
+
+    }
+}
+
+inline int PathOrderOptimizer::getClosestPointInPolygon(Point prev_point, int i_polygon)
+{
+    PolygonRef poly = polygons[i_polygon];
+    int best = -1;
+    float bestDist = std::numeric_limits<float>::infinity();
+    bool orientation = poly.orientation();
+    for(unsigned int i_point=0 ; i_point<poly.size() ; i_point++)
+    {
+        float dist = vSize2f(poly[i_point] - prev_point);
+        Point n0 = normal(poly[(i_point-1+poly.size())%poly.size()] - poly[i_point], 2000);
+        Point n1 = normal(poly[i_point] - poly[(i_point + 1) % poly.size()], 2000);
+        float dot_score = dot(n0, n1) - dot(crossZ(n0), n1); /// prefer binnenbocht
+        if (orientation)
+            dot_score = -dot_score;
+        if (dist + dot_score < bestDist)
+        {
+            best = i_point;
+            bestDist = dist;
+        }
+    }
+    return best;
+}
+
+
+/**
+*
+*/
+void LineOrderOptimizer::optimize()
+{
+    int gridSize = 5000; // the size of the cells in the hash grid.
+    BucketGrid2D<unsigned int> line_bucket_grid(gridSize);
+    bool picked[polygons.size()];
+    memset(picked, false, sizeof(bool) * polygons.size());/// initialized as falses
+    
+    for(unsigned int i_polygon=0 ; i_polygon<polygons.size() ; i_polygon++) /// find closest point to initial starting point within each polygon +initialize picked
+    {
+        int best = -1;
+        float bestDist = std::numeric_limits<float>::infinity();
+        PolygonRef poly = polygons[i_polygon];
+        for(unsigned int i_point=0; i_point<poly.size(); i_point++) /// get closest point from polygon
+        {
+            float dist = vSize2f(poly[i_point] - startPoint);
+            if (dist < bestDist)
+            {
+                best = i_point;
+                bestDist = dist;
+            }
+        }
+        polyStart.push_back(best);
+
+        assert(poly.size() == 2);
+
+        line_bucket_grid.insert(poly[0], i_polygon);
+        line_bucket_grid.insert(poly[1], i_polygon);
+
+    }
+
+
+    Point incommingPerpundicularNormal(0, 0);
+    Point prev_point = startPoint;
+    for(unsigned int i_polygon=0 ; i_polygon<polygons.size() ; i_polygon++) /// actual path order optimizer
+    {
+        int best = -1;
+        float bestDist = std::numeric_limits<float>::infinity();
+
+        for(unsigned int i_close_line_polygon :  line_bucket_grid.findNearbyObjects(prev_point)) /// check if single-line-polygon is close to last point
+        {
+            if (picked[i_close_line_polygon] || polygons[i_close_line_polygon].size() < 1)
+                continue;
+
+
+            checkIfLineIsBest(i_close_line_polygon, best, bestDist, prev_point, incommingPerpundicularNormal);
+
+        }
+
+        if (best == -1) /// if single-line-polygon hasn't been found yet
+        {
+           for(unsigned int i_polygon=0 ; i_polygon<polygons.size() ; i_polygon++)
+            {
+                if (picked[i_polygon] || polygons[i_polygon].size() < 1) /// skip single-point-polygons
+                    continue;
+                assert(polygons[i_polygon].size() == 2);
+
+                checkIfLineIsBest(i_polygon, best, bestDist, prev_point, incommingPerpundicularNormal);
+
+            }
+        }
+
+        if (best > -1) /// should always be true; we should have been able to identify the best next polygon
+        {
+            assert(polygons[best].size() == 2);
+
+            int endIdx = polyStart[best] * -1 + 1; /// 1 -> 0 , 0 -> 1
+            prev_point = polygons[best][endIdx];
+            incommingPerpundicularNormal = crossZ(normal(polygons[best][endIdx] - polygons[best][polyStart[best]], 1000));
+
+            picked[best] = true;
+            polyOrder.push_back(best);
+        }
+        else
+            logError("Failed to find next closest line.\n");
+    }
+
+    prev_point = startPoint;
+    for(unsigned int n=0; n<polyOrder.size(); n++) /// decide final starting points in each polygon
+    {
+        int nr = polyOrder[n];
+        PolygonRef poly = polygons[nr];
+        int best = -1;
+        float bestDist = std::numeric_limits<float>::infinity();
+        bool orientation = poly.orientation();
+        for(unsigned int i=0;i<poly.size(); i++)
+        {
+            float dist = vSize2f(polygons[nr][i] - prev_point);
+            Point n0 = normal(poly[(i+poly.size()-1)%poly.size()] - poly[i], 2000);
+            Point n1 = normal(poly[i] - poly[(i + 1) % poly.size()], 2000);
+            float dot_score = dot(n0, n1) - dot(crossZ(n0), n1);
+            if (orientation)
+                dot_score = -dot_score;
+            if (dist + dot_score < bestDist)
+            {
+                best = i;
+                bestDist = dist + dot_score;
+            }
+        }
+
+        polyStart[nr] = best;
+        assert(poly.size() == 2);
+        prev_point = poly[best *-1 + 1]; /// 1 -> 0 , 0 -> 1
+
+    }
+}
+
+inline void LineOrderOptimizer::checkIfLineIsBest(unsigned int i_line_polygon, int& best, float& bestDist, Point& prev_point, Point& incommingPerpundicularNormal)
+{
+    { /// check distance to first point on line (0)
+        float dist = vSize2f(polygons[i_line_polygon][0] - prev_point);
+        dist += abs(dot(incommingPerpundicularNormal, normal(polygons[i_line_polygon][1] - polygons[i_line_polygon][0], 1000))) * 0.0001f; /// penalize sharp corners
+        if (dist < bestDist)
+        {
+            best = i_line_polygon;
+            bestDist = dist;
+            polyStart[i_line_polygon] = 0;
+        }
+    }
+    { /// check distance to second point on line (1)
+        float dist = vSize2f(polygons[i_line_polygon][1] - prev_point);
+        dist += abs(dot(incommingPerpundicularNormal, normal(polygons[i_line_polygon][0] - polygons[i_line_polygon][1], 1000) )) * 0.0001f; /// penalize sharp corners
+        if (dist < bestDist)
+        {
+            best = i_line_polygon;
+            bestDist = dist;
+            polyStart[i_line_polygon] = 1;
+        }
+    }
+}
+
+}//namespace cura

src/pathOrderOptimizer.h

@@ -0,0 +1,83 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef PATHOPTIMIZER_H
+#define PATHOPTIMIZER_H
+
+#include <stdint.h>
+#include "utils/polygon.h"
+
+namespace cura {
+
+//! Parts order optimization class.
+/*!
+* Utility class for optimizing the path order by minimizing the distance traveled between printing different parts in the layer.
+* The order of polygons is optimized and the startingpoint within each polygon is chosen.
+*/
+class PathOrderOptimizer
+{
+public:
+    Point startPoint; //!< The location of the nozzle before starting to print the current layer
+    std::vector<PolygonRef> polygons; //!< the parts of the layer (in arbitrary order)
+    std::vector<int> polyStart; //!< polygons[i][polyStart[i]] = point of polygon i which is to be the starting point in printing the polygon
+    std::vector<int> polyOrder; //!< the optimized order as indices in #polygons
+
+    PathOrderOptimizer(Point startPoint)
+    {
+        this->startPoint = startPoint;
+    }
+
+    void addPolygon(PolygonRef polygon)
+    {
+        this->polygons.push_back(polygon);
+    }
+
+    void addPolygons(Polygons& polygons)
+    {
+        for(unsigned int i=0;i<polygons.size(); i++)
+            this->polygons.push_back(polygons[i]);
+    }
+
+    void optimize(); //!< sets #polyStart and #polyOrder
+
+    private:
+        int getClosestPointInPolygon(Point prev, int i_polygon); //!< returns the index of the closest point
+
+
+};
+//! Line path order optimization class.
+/*!
+* Utility class for optimizing the path order by minimizing the distance traveled between printing different lines within a part.
+*/
+class LineOrderOptimizer
+{
+public:
+    Point startPoint; //!< The location of the nozzle before starting to print the current layer
+    std::vector<PolygonRef> polygons; //!< the parts of the layer (in arbitrary order)
+    std::vector<int> polyStart; //!< polygons[i][polyStart[i]] = point of polygon i which is to be the starting point in printing the polygon
+    std::vector<int> polyOrder; //!< the optimized order as indices in #polygons
+
+    LineOrderOptimizer(Point startPoint)
+    {
+        this->startPoint = startPoint;
+    }
+
+    void addPolygon(PolygonRef polygon)
+    {
+        this->polygons.push_back(polygon);
+    }
+
+    void addPolygons(Polygons& polygons)
+    {
+        for(unsigned int i=0;i<polygons.size(); i++)
+            this->polygons.push_back(polygons[i]);
+    }
+
+    void optimize(); //!< sets #polyStart and #polyOrder
+
+private:
+    void checkIfLineIsBest(unsigned int i_line_polygon, int& best, float& bestDist, Point& prev_point, Point& incommingPerpundicularNormal);
+
+};
+
+}//namespace cura
+
+#endif//PATHOPTIMIZER_H

src/polygonOptimizer.cpp

@@ -1,48 +1,54 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#include "polygonOptimizer.h"
-
-void optimizePolygon(PolygonRef poly)
-{
-    Point p0 = poly[poly.size()-1];
-    for(unsigned int i=0;i<poly.size();i++)
-    {
-        Point p1 = poly[i];
-        if (shorterThen(p0 - p1, MICRON2INT(10)))
-        {
-            poly.remove(i);
-            i --;
-        }else{
-        /*
-            Point p2;
-            if (i < poly.size() - 1)
-                p2 = poly[i+1];
-            else
-                p2 = poly[0];
-            
-            Point diff0 = normal(p1 - p0, 10000000);
-            Point diff2 = normal(p1 - p2, 10000000);
-            
-            int64_t d = dot(diff0, diff2);
-            if (d < -99999999999999LL)
-            {
-                poly.remove(i);
-                i --;
-            }else{*/
-                p0 = p1;
-            /*}*/
-        }
-    }
-}
-
-void optimizePolygons(Polygons& polys)
-{
-    for(unsigned int n=0;n<polys.size();n++)
-    {
-        optimizePolygon(polys[n]);
-        if (polys[n].size() < 3)
-        {
-            polys.remove(n);
-            n--;
-        }
-    }
-}
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include "polygonOptimizer.h"
+
+namespace cura {
+
+void optimizePolygon(PolygonRef poly)
+{
+    Point p0 = poly[poly.size()-1];
+    for(unsigned int i=0;i<poly.size();i++)
+    {
+        Point p1 = poly[i];
+        if (shorterThen(p0 - p1, MICRON2INT(10)))
+        {
+            poly.remove(i);
+            i --;
+        }else if (shorterThen(p0 - p1, MICRON2INT(500)))
+        {
+            Point p2;
+            if (i < poly.size() - 1)
+                p2 = poly[i+1];
+            else
+                p2 = poly[0];
+            
+            Point diff0 = normal(p1 - p0, 10000000);
+            Point diff2 = normal(p1 - p2, 10000000);
+            
+            int64_t d = dot(diff0, diff2);
+            if (d < -99999999999999LL)
+            {
+                poly.remove(i);
+                i --;
+            }else{
+                p0 = p1;
+            }
+        }else{
+            p0 = p1;
+        }
+    }
+}
+
+void optimizePolygons(Polygons& polys)
+{
+    for(unsigned int n=0;n<polys.size();n++)
+    {
+        optimizePolygon(polys[n]);
+        if (polys[n].size() < 3)
+        {
+            polys.remove(n);
+            n--;
+        }
+    }
+}
+
+}//namespace cura