bugfix: sliceDataStorage.meshes reallocation due to size change

.gitignore

@@ -1,34 +1,25 @@
 *.tar.bz2
 *.tar.gz
 *.7z
-*.zip
-.DS_Store
-*~
-NUL
-*.gcode
-
-## Building result.
-build/*
 *.pyc
+*.zip
 *.exe
-*.o
-CuraEngine
+.idea
+.DS_Store
 _bin
 _obj
-
-## IDE project files.
+*.depend
+*.o
+.*.swp
+*.gcode
+CuraEngine
+build/*
+*~
+NUL
 CuraEngine.layout
 CuraEngine.cbp
-*kdev*
-*.kate-swp
-nbproject/*
-.idea
-*.depend
-.*.swp
-
-## Documentation.
 documentation/html/*
 documentation/latex/*
 
-## Test results.
-tests/output.xml
+*kdev*
+*.kate-swp

CMakeLists.txt

@@ -2,14 +2,7 @@ project(CuraEngine)
 
 cmake_minimum_required(VERSION 2.8.12)
 
-option (ENABLE_ARCUS
-    "Enable support for ARCUS" ON)
-
-if (ENABLE_ARCUS)
-    message(STATUS "Building with Arcus")
-    find_package(Arcus REQUIRED)
-    add_definitions(-DARCUS)
-endif ()
+find_package(Arcus REQUIRED)
 
 if(NOT ${CMAKE_VERSION} VERSION_LESS 3.1)
     set(CMAKE_CXX_STANDARD 11)
@@ -17,107 +10,62 @@ else()
     set(CMAKE_CXX_FLAGS "-std=c++11")
 endif()
 
-set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
-
-set(CURA_ENGINE_VERSION "master" CACHE STRING "Version name of Cura")
-
-option(BUILD_TESTS OFF)
-
-# Add a compiler flag to check the output for insane values if we are in debug mode.
-if(CMAKE_BUILD_TYPE MATCHES DEBUG)
-	message(STATUS "Building debug release of CuraEngine.")
-	add_definitions(-DASSERT_INSANE_OUTPUT)
-endif()
-
 # Add warnings
 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
 
 if(NOT APPLE AND NOT WIN32)
     set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -static-libstdc++")
+elseif(APPLE)
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
 endif()
 
 include_directories(${CMAKE_CURRENT_BINARY_DIR} libs)
 
 add_library(clipper STATIC libs/clipper/clipper.cpp)
 
-set(engine_SRCS # Except main.cpp.
+set(engine_SRCS
     src/bridge.cpp
     src/comb.cpp
     src/commandSocket.cpp
-    src/FffGcodeWriter.cpp
-    src/FffPolygonGenerator.cpp
-    src/FffProcessor.cpp
     src/gcodeExport.cpp
     src/gcodePlanner.cpp
     src/infill.cpp
     src/inset.cpp
     src/layerPart.cpp
-    src/LayerPlanBuffer.cpp
-    src/MergeInfillLines.cpp
+    src/main.cpp
     src/mesh.cpp
-    src/MeshGroup.cpp
     src/multiVolumes.cpp
     src/pathOrderOptimizer.cpp
-    src/PrimeTower.cpp
-    src/Progress.cpp
+    src/polygonOptimizer.cpp
     src/raft.cpp
     src/settingRegistry.cpp
     src/settings.cpp
     src/skin.cpp
     src/skirt.cpp
-    src/sliceDataStorage.cpp
     src/slicer.cpp
     src/support.cpp
     src/timeEstimate.cpp
-    src/wallOverlap.cpp
     src/Weaver.cpp
     src/Wireframe2gcode.cpp
 
+    src/modelFile/modelFile.cpp
+
     src/utils/gettime.cpp
     src/utils/logoutput.cpp
     src/utils/polygonUtils.cpp
-    src/utils/polygon.cpp
 )
 
-# List of tests. For each test there must be a file tests/${NAME}.cpp and a file tests/${NAME}.h.
-set(engine_TEST
-	GCodePlannerTest
-    LinearAlg2DTest
-)
-
-# Generating ProtoBuf protocol
-if (ENABLE_ARCUS)
 protobuf_generate_cpp(engine_PB_SRCS engine_PB_HEADERS Cura.proto)
-endif ()
 
-# Compiling CuraEngine itself.
-add_library(_CuraEngine ${engine_SRCS} ${engine_PB_SRCS}) #First compile all of CuraEngine as library, allowing this to be re-used for tests.
-target_link_libraries(_CuraEngine clipper)
-if (ENABLE_ARCUS)
-    target_link_libraries(_CuraEngine Arcus)
-endif ()
+add_executable(CuraEngine ${engine_SRCS} ${engine_PB_SRCS})
+target_link_libraries(CuraEngine clipper Arcus)
 
-set_target_properties(_CuraEngine PROPERTIES COMPILE_DEFINITIONS "VERSION=\"${CURA_ENGINE_VERSION}\"")
+add_executable(Test src/test.cpp)
+target_link_libraries(Test clipper)
 
 if (UNIX)
-    target_link_libraries(_CuraEngine pthread)
-endif()
-add_executable(CuraEngine src/main.cpp) #Then compile main.cpp as separate executable, and link the library to it.
-target_link_libraries(CuraEngine _CuraEngine)
-
-# Compiling the test environment.
-if (BUILD_TESTS)
-    message(STATUS "Building tests...")
-    enable_testing()
-    foreach (test ${engine_TEST})
-        add_executable(${test} tests/main.cpp tests/${test}.cpp)
-        target_link_libraries(${test} _CuraEngine cppunit)
-        add_test(${test} ${test})
-    endforeach()
+    target_link_libraries(CuraEngine pthread)
 endif()
 
-# Installing CuraEngine.
 include(GNUInstallDirs)
 install(TARGETS CuraEngine DESTINATION ${CMAKE_INSTALL_BINDIR})
-include(CPackConfig.cmake)
-

CPackConfig.cmake

@@ -1,20 +0,0 @@
-set(CPACK_PACKAGE_VENDOR "Ultimaker")
-set(CPACK_PACKAGE_CONTACT "Arjen Hiemstra <a.hiemstra@ultimaker.com>")
-set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Cura Engine")
-set(CPACK_PACKAGE_VERSION "15.05.90")
-set(CPACK_GENERATOR "DEB")
-if(NOT DEFINED CPACK_DEBIAN_PACKAGE_ARCHITECTURE)
-  execute_process(COMMAND dpkg --print-architecture OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE OUTPUT_STRIP_TRAILING_WHITESPACE)
-endif()
-set(CPACK_PACKAGE_FILE_NAME "${CMAKE_PROJECT_NAME}-${CPACK_PACKAGE_VERSION}_${CPACK_DEBIAN_PACKAGE_ARCHITECTURE}")
-
-set(DEB_DEPENDS
-    "arcus (>= 15.05.90)"
-    "protobuf (>= 3.0.0)"
-    "libstdc++6 (>= 4.9.0)"
-    "libgcc1 (>= 4.9.0)"
-)
-string(REPLACE ";" ", " DEB_DEPENDS "${DEB_DEPENDS}")
-set(CPACK_DEBIAN_PACKAGE_DEPENDS ${DEB_DEPENDS})
-
-include(CPack)

Changelog.md

@@ -1,14 +0,0 @@
-Changelog CuraEngine
-====================
-
-
-
-
-- Feature: infill_wipe_dist. Add a travel move after an infill line in order to let it stick better to the walls.
-- Feature: Draft Protection Screen. A shell similar to the ooze shield providing protection from gusts of wind and acting similar to a heated chamber
-
-
-Release 15.06.01
------
-
-- [Not documented]

Cura.proto

@@ -1,22 +1,13 @@
 syntax = "proto3";
 
-package cura.proto;
-
-
-message ObjectList 
-{
-    repeated Object objects = 1;
-    repeated Setting settings = 2;
-}
+package Cura;
 
 // typeid 1
-message Slice
-{
-    repeated ObjectList object_lists = 1;
+message ObjectList {
+    repeated Object objects = 1;
 }
 
-message Object 
-{
+message Object {
     int64 id = 1;
     bytes vertices = 2; //An array of 3 floats.
     bytes normals = 3; //An array of 3 floats.
@@ -25,19 +16,16 @@ message Object
 }
 
 // typeid 3
-message Progress 
-{
+message Progress {
     float amount = 1;
 }
 
 // typeid 2
-message SlicedObjectList 
-{
+message SlicedObjectList {
     repeated SlicedObject objects = 1;
 }
 
-message SlicedObject 
-{
+message SlicedObject {
     int64 id = 1;
 
     repeated Layer layers = 2;
@@ -62,8 +50,6 @@ message Polygon {
         SkirtType = 5;
         InfillType = 6;
         SupportInfillType = 7;
-        MoveCombingType = 8;
-        MoveRetractionType = 9;
     }
     Type type = 1;
     bytes points = 2;

Doxyfile

@@ -58,8 +58,7 @@ PROJECT_LOGO           =
 # entered, it will be relative to the location where doxygen was started. If
 # left blank the current directory will be used.
 
-#LEAVE THIS DIRECTORY EMPTY IF THIS DOCUMENTATION NEEDS TO BE PUBLISHED AUTOMATICALLY TO GITHUB PAGES!
-OUTPUT_DIRECTORY       = docs
+OUTPUT_DIRECTORY       = documentation
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
 # directories (in 2 levels) under the output directory of each output format and
@@ -2050,7 +2049,7 @@ HIDE_UNDOC_RELATIONS   = YES
 # set to NO
 # The default value is: NO.
 
-HAVE_DOT               = YES
+HAVE_DOT               = NO
 
 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
 # to run in parallel. When set to 0 doxygen will base this on the number of

README.md

@@ -3,9 +3,9 @@ CuraEngine
 The CuraEngine is a C++ console application for 3D printing GCode generation. It has been made as a better and faster alternative to the old Skeinforge engine.
 
 The CuraEngine is pure C++ and uses Clipper from http://www.angusj.com/delphi/clipper.php
-Furthermore it depends on libArcus by Ultimaker, which can be found at http://github.com/Ultimaker/libArcus
+There are no external dependences and Clipper is included in the source code without modifications.
 
-This is just a console application for GCode generation. For a full graphical application look at https://github.com/Ultimaker/Cura which is the graphical frontend for CuraEngine.
+This is just a console application for GCode generation. For a full graphical application look at https://github.com/daid/Cura which is the graphical frontend for CuraEngine.
 
 The CuraEngine can be used seperately or in other applications. Feel free to add it to your application. But please take note of the License.
 
@@ -24,7 +24,6 @@ How to Install
 
 In order to compile CuraEngine, either use CMake or start a project in your preferred IDE. 
 CMake compilation:
-
 1. Navigate to the CuraEngine directory and execute the following commands
 2. $ mkdir build && cd build
 3. $ cmake ..
@@ -49,16 +48,16 @@ Installing Protobuf
 
 Running
 =======
-Other than running CuraEngine from a frontend, such as Ultimaker/Cura, one can run CuraEngine from the command line.
-For that one needs a settings JSON file, which can be found in the Ultimaker/Cura repository.
+Other than running CuraEngine from a frontend, such as PluggableCura, one can run CuraEngine from the command line.
 An example run for an UM2 machine looks as follows:
 * Navigate to the CuraEngine directory and execute the following
 ```
-./build/CuraEngine slice -v -j ../Cura/resources/machines/dual_extrusion_printer.json -o "output/test.gcode" -e1 -s infill_line_distance=0 -e0 -l "/model_1.stl" -e1 -l "fully_filled_model.stl" 
+./build/CuraEngine -v -j fdmprinter.json -s machine_start_gcode=";FLAVOR:UltiGCode
+;TIME:10000000
+;MATERIAL:2000
+;MATERIAL2:0" -s mesh_position_x=115.0 -s mesh_position_y=112.5 -s mesh_position_z=0 -s material_diameter=1.128 -o "output/test.gcode" "/path/to/model.stl"
 ```
 
-Run `CuraEngine help` for a general description of how to use the CuraEngine tool.
-
 Internals
 =========
 
@@ -120,4 +119,4 @@ The GCode generation is quite a large bit of code. As a lot is going on here. Im
 * PathOrderOptimizer: This piece of code needs to solve a TravelingSalesmanProblem. Given a list of polygons/lines it tries to find the best order in which to print them. It currently does this by finding the closest next polygon to print.
 * Infill: This code generates a group of lines from an area. This is the code that generates the actuall infill pattern. There is also a concentric infill function, which is currently not used.
 * Comb: The combing code is the code that tries to avoid holes when moving the head around without printing. This code also detects when it fails. The final GCode generator uses the combing code while generating the final GCode. So they interact closely.
-* GCodeExport: The GCode export is a 2 step process. First it collects all the paths for a layer that it needs to print, this includes all moves, prints, extrusion widths. And then it generates the final GCode. This is the only piece of code that has knowledge about GCode keywords and syntax to generate a different flavor of GCode it will be the only piece that needs adjustment. All volumatric calculations also happen here.
+* GCodeExport: The GCode export is a 2 step process. First it collects all the paths for a layer that it needs to print, this includes all moves, prints, extrusion widths. And then it generates the final GCode. This is the only piece of code that has knowledge about GCode keywords and syntax;meshmdhfdhfdhf to generate a different flavor of GCode it will be the only piece that needs adjustment. All volumatric calculations also happen here.

documentation/code_conventions.md

@@ -0,0 +1,126 @@
+Code Conventions
+=======
+Note that the code convention described here have not all yet been fully implemented.
+
+Bracketing and indenting
+-----
+~~~~~~~~~~~~~~~{.cpp}
+if (condition) // brackets always on new lines
+{ // allways a bracket after an if, for, while, etc.
+    // indent always with 4 spaces, never with tabs
+}
+else // else on new line
+{
+    // more code
+}
+~~~~~~~~~~~~~~~
+
+Naming conventions
+------
+ * variables: lower_case_with_underscores
+ * functions: loweCamelCase
+ * classes: UpperCamelCase
+ * macros: UPPER_CASE_WITH_UNDERSCORES
+~~~~~~~~~~~~~~~{.cpp}
+#define UPPER_CASE_MACRO 1
+
+class UpperCamelCase
+{
+private:
+    MemberVariableObject with_underscores;
+public:
+    MemberVariableObject with_underscores;
+
+public:
+    UpperCamelCase();
+    ~UpperCamelCase();
+    
+    // start with input variable(s) and end with output variable(s)
+    void lowerCamelCaseFunctions(ParamObject& also_with_underscores)
+    {
+        LocalObject under_scores;
+    }
+private:
+    void putFunctionsAndVariablesInSeperatePublicPrivateBlocks();
+};
+~~~~~~~~~~~~~~~
+
+Ordering
+----
+~~~~~~~~~~~~~~~{.cpp}
+class Example
+{
+    // start with input variable(s) and end with output parameter(s) 
+    void function1(ParamObject& input_variable, int setting_parameter, ParamObject2& return_parameter)
+    {
+        function2();
+        function3();
+    }
+    
+    // place functions called solely by one other function below it chronologically
+    void function2();
+    
+    void function3();
+};
+~~~~~~~~~~~~~~~
+
+Documentation
+----
+We use [Doxygen](www.doxygen.org/) to generate documentation. Try to keep your documentation in doxygen style.
+
+Here's a small example:
+~~~~~~~~~~~~~~~{.cpp}
+/ *!
+ * Doxygen style comments!
+ *
+ * \param param1 explanation may refer to another \p param2
+ * /
+void function(int param1, int param2)
+{
+    // non-doxygen style comments on implementation details
+}
+
+int member; //!< inline doxygen comment on the entry to the left
+~~~~~~~~~~~~~~~
+
+Files
+--------
+For a file Foo.h (UpperCamelCase):
+~~~~~~~~~~~~~~~{.cpp}
+#ifndef FOO_H
+#define FOO_H
+// [content]
+#endif//FOO_H
+~~~~~~~~~~~~~~~
+
+
+Other
+----
+~~~~~~~~~~~~~~~{.cpp}
+#include <all>
+#include <includes>
+#include <on>
+#include <top>
+
+#include <first_system_includes>
+
+#include <then_library_includes>
+
+#include "finally_local_includes"
+
+enum class EnumExample 
+{
+    ELEM0 = 0,
+    ELEM1 = 1
+}
+~~~~~~~~~~~~~~~
+
+Illegal syntax
+----
+~~~~~~~~~~~~~~~{.cpp}
+void function()
+{
+    if (condition)
+        single_line_outside_code_block(); // always use braces!
+}; // unneccesary semicolon after function definition is not allowed
+~~~~~~~~~~~~~~~

documentation/glossary.md

@@ -4,7 +4,6 @@ Glossary
 
 Term/Synonyms | Meaning
 --- | ---
-Extruder Train | The whole of a feeder, bowden tube and a nozzle
 Island/Part | isolated/unconnected part in 2D slice
 Inset | perimeter, the perimeters which are laid down around the infill
 Slicing | The act of extracting the contours of the object at a certain height (not the whole process which would also include gcode generation etc.)

libs/rapidjson/license.txt

@@ -1,57 +0,0 @@
-Tencent is pleased to support the open source community by making RapidJSON available. 
- 
-Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip.  All rights reserved.
-
-If you have downloaded a copy of the RapidJSON binary from Tencent, please note that the RapidJSON binary is licensed under the MIT License.
-If you have downloaded a copy of the RapidJSON source code from Tencent, please note that RapidJSON source code is licensed under the MIT License, except for the third-party components listed below which are subject to different license terms.  Your integration of RapidJSON into your own projects may require compliance with the MIT License, as well as the other licenses applicable to the third-party components included within RapidJSON.
-A copy of the MIT License is included in this file.
-
-Other dependencies and licenses:
-
-Open Source Software Licensed Under the BSD License:
---------------------------------------------------------------------
-
-The msinttypes r29 
-Copyright (c) 2006-2013 Alexander Chemeris 
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 
-* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
-* Neither the name of  copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-Open Source Software Licensed Under the JSON License:
---------------------------------------------------------------------
-
-json.org 
-Copyright (c) 2002 JSON.org
-All Rights Reserved.
-
-JSON_checker
-Copyright (c) 2002 JSON.org
-All Rights Reserved.
-
-	
-Terms of the JSON License:
----------------------------------------------------
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-The Software shall be used for Good, not Evil.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-
-Terms of the MIT License:
---------------------------------------------------------------------
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

meta/15.04_to_2.0.txt

@@ -1,203 +0,0 @@
-This file is a conversion from the ENGINE settings of 15.04 to the ENGINE setting of 2.0
-
-This is NOT a conversion on the frontend internal setting names (15.04 has the dictionary of doom)
-
-
-autoCenter ?        ==> center_object OR machine_center_is_zero ??
-coolHeadLift        ==> cool_lift_head
-downSkinCount       ==> bottom_layers
-enableCombing       ==> retraction_combing
-enableOozeShield    ==> ooze_shield_enabled
-endCode             ==> machine_end_gcode
-extruderOffset[MAX_EXTRUDERS] = (machine_nozzle_offset_x, machine_nozzle_offset_y)
-extrusionWidth      ==> infill_line_width, skirt_line_width, support_line_width
-fanFullOnLayerNr    ==> cool_fan_full_layer
-fanSpeedMax         ==> cool_fan_speed_max
-fanSpeedMin         ==> cool_fan_speed_min
-filamentDiameter    ==> material_diameter
-filamentFlow        ==> material_flow
-fixHorrible         ==> meshfix_union_all AND/OR meshfix_union_all_remove_holes AND/OR meshfix_extensive_stitching AND/OR magic_mesh_surface_mode
-gcodeFlavor         ==> machine_gcode_flavor
-infillOverlap       ==> infill_overlap
-infillPattern       ==> infill_pattern
-infillSpeed         ==> speed_infill
-initialLayerSpeed   ==> speed_layer_0
-initialLayerThickness   ==> layer_height_0
-initialSpeedupLayers    ==> speed_slowdown_layers
-inset0Speed         ==> speed_wall_0
-insetCount          ==> wall_line_count
-insetXSpeed         ==> speed_wall_x
-layer0extrusionWidth    [ Doesn't exist anymore ]
-layerThickness      ==> layer_height
-matrix                  [ Doesn't exist anymore ]
-minimalExtrusionBeforeRetraction
-minimalFeedrate     ==> cool_min_speed
-minimalLayerTime    ==> cool_min_layer_time
-moveSpeed           ==> speed_travel
-multiVolumeOverlap  ==> multiple_mesh_overlap
-nozzleSize          ==> machine_nozzle_size
-objectPosition      ==> mesh_position_x, mesh_position_y, mesh_position_z
-objectSink              [ Doesn't exist in CuraEngine anymore ]
-perimeterBeforeInfill = not(infill_before_walls)
-postSwitchExtruderCode  ==> machine_extruder_start_code
-preSwitchExtruderCode   ==> machine_extruder_end_code
-printSpeed          ==> speed_prime_tower, speed_support_lines, speed_support_roof, skirt_speed
-raftAirGap          ==> raft_airgap
-raftAirGapLayer0        ?!?!?
-raftBaseLinewidth       ==> raft_base_line_width
-raftBaseSpeed           ==> raft_interface_speed, raft_base_speed
-raftBaseThickness       ==> raft_base_thickness
-raftFanSpeed            ==> raft_base_fan_speed, raft_interface_fan_speed, raft_surface_fan_speed
-raftInterfaceLineSpacing==> raft_interface_line_spacing
-raftInterfaceLinewidth  ==> raft_interface_line_width
-raftInterfaceThickness  ==> raft_interface_thickness
-raftLineSpacing         ==> raft_base_line_spacing
-raftMargin              ==> raft_margin
-raftSurfaceLayers       ==> raft_surface_layers
-raftSurfaceLineSpacing  ==> raft_surface_line_spacing
-raftSurfaceLinewidth    ==> raft_surface_line_width
-raftSurfaceSpeed        ==> raft_surface_speed
-raftSurfaceThickness    ==> raft_surface_thickness
-retractionAmount                ==> retraction_amount (set retraction_enable = true)
-retractionAmountExtruderSwitch  ==> switch_extruder_retraction_amount
-retractionAmountPrime           ==> retraction_extra_prime_amount
-retractionMinimalDistance       ==> retraction_extrusion_window ( set retraction_count_max = 1 )
-retractionSpeed                 ==> retraction_retract_speed (, retraction_prime_speed ?), switch_extruder_retraction_speed
-retractionZHop                  ==> retraction_hop
-simpleMode              ??!
-skinSpeed           ==> speed_topbottom
-skirtDistance       ==> skirt_gap
-skirtLineCount      ==> brim_line_count, skirt_line_count
-skirtMinLength      ==> skirt_minimal_length
-sparseInfillLineDistance    ==> infill_line_distance
-spiralizeMode   ==> magic_spiralize
-startCode       ==> machine_start_gcode
-supportAngle        ==> support_angle, support_enable=true if support_angle>0
-supportEverywhere   ==> support_type
-supportExtruder     ==> support_extruder_nr, support_extruder_nr_layer_0
-supportLineDistance ==> support_line_distance
-supportType         ==> support_pattern
-supportXYDistance   ==> support_xy_distance
-supportZDistance    ==> support_z_distance
-upSkinCount         ==> top_layers
-wipeTowerSize       ==> prime_tower_size
-
-
-
-
-
-NEW:
-adhesion_extruder_nr
-adhesion_type
-alternate_extra_perimeter
-coasting_enable
-coasting_min_volume_move
-coasting_min_volume_retract
-coasting_speed_move
-coasting_speed_retract
-coasting_volume_move
-coasting_volume_retract
-cool_min_layer_time_fan_speed_max
-draft_shield_dist
-draft_shield_height
-extruder_nr
-fill_perimeter_gaps
-infill_sparse_thickness
-infill_wipe_dist
-machine_depth
-machine_extruder_count
-machine_extruder_end_pos_abs
-machine_extruder_end_pos_x
-machine_extruder_end_pos_y
-machine_extruder_start_pos_abs
-machine_extruder_start_pos_x
-machine_extruder_start_pos_y
-machine_heated_bed
-machine_nozzle_cool_down_speed
-machine_nozzle_expansion_angle
-machine_nozzle_head_distance
-machine_nozzle_heat_up_speed
-machine_nozzle_tip_outer_diameter
-machine_print_temp_wait
-machine_use_extruder_offset_to_offset_coords
-machine_width
-magic_fuzzy_skin_enabled
-magic_fuzzy_skin_point_dist
-magic_fuzzy_skin_thickness
-material_bed_temperature
-material_bed_temp_prepend
-material_bed_temp_wait
-material_extrusion_cool_down_speed
-material_flow_dependent_temperature
-material_flow_temp_graph
-material_print_temperature
-material_print_temp_prepend
-material_print_temp_wait
-material_standby_temperature
-meshfix_keep_open_polygons
-ooze_shield_angle
-ooze_shield_dist
-prime_tower_dir_outward
-prime_tower_distance
-prime_tower_flow
-prime_tower_line_width
-prime_tower_position_x
-prime_tower_position_y
-prime_tower_wipe_enabled
-remove_overlapping_walls_0_enabled
-remove_overlapping_walls_x_enabled
-retraction_min_travel
-skin_alternate_rotation
-skin_line_width
-skin_no_small_gaps_heuristic
-skin_outline_count
-support_area_smoothing
-support_bottom_distance
-support_bottom_stair_step_height
-support_conical_angle
-support_conical_enabled
-support_conical_min_width
-support_connect_zigzags
-support_join_distance
-support_minimal_diameter
-support_offset
-support_roof_enable
-support_roof_extruder_nr
-support_roof_height
-support_roof_line_distance
-support_roof_line_width
-support_roof_pattern
-support_top_distance
-support_tower_diameter
-support_tower_roof_angle
-switch_extruder_prime_speed
-top_bottom_pattern
-travel_avoid_distance
-travel_avoid_other_parts
-travel_compensate_overlapping_walls_enabled
-wall_line_width_0
-wall_line_width_x
-wireframe_bottom_delay
-wireframe_drag_along
-wireframe_enabled
-wireframe_fall_down
-wireframe_flat_delay
-wireframe_flow_connection
-wireframe_flow_flat
-wireframe_height
-wireframe_nozzle_clearance
-wireframe_printspeed_bottom
-wireframe_printspeed_down
-wireframe_printspeed_flat
-wireframe_printspeed_up
-wireframe_roof_drag_along
-wireframe_roof_fall_down
-wireframe_roof_inset
-wireframe_roof_outer_delay
-wireframe_straight_before_down
-wireframe_strategy
-wireframe_top_delay
-wireframe_top_jump
-wireframe_up_half_speed
-xy_offset
-z_seam_type

meta/new settings master

@@ -1,130 +0,0 @@
-[ problem ]
-gantry_height introduced by Jaime while there already was machine_nozzle_gantry_distance
-
-
-[ RENAMES ]
-raft_base_linewidth > raft_base_line_width
-raft_interface_linewidth > raft_interface_line_width
-fill_overlap > infill_overlap
-fill_pattern > infill_pattern
-fill_sparse_combine > infill_sparse_combine
-fill_sparse_density > infill_sparse_density
-fill_sparse_thickness > infill_sparse_thickness
-support_fill_rate > support_infill_rate
-
-
-[ SPLITS ]
-raft_line_spacing > raft_base_line_spacing   (, raft_interface_line_spacing, raft_surface_line_spacing)
-wall_overlap_avoid_enabled > remove_overlapping_walls_enabled (, remove_overlapping_walls_0_enabled, remove_overlapping_walls_x_enabled)
-
-retraction_minimal_extrusion > retraction_extrusion_window (+ retraction_count_max = 1)
-
-magic_mesh_surface_mode : false >> "Normal"
-magic_mesh_surface_mode : true >> "Surface"
-
-
-[ NEW ]
-alternate_extra_perimeter
-
-coasting_enable
-coasting_min_volume
-coasting_min_volume_move
-coasting_min_volume_retract
-coasting_speed
-coasting_speed_move
-coasting_speed_retract
-coasting_volume
-coasting_volume_move
-coasting_volume_retract
-
-fill_perimeter_gaps
-
-draft_shield_dist
-draft_shield_enabled
-draft_shield_height
-draft_shield_height_limitation
-
-infill_wipe_dist
-
-line_width (was wall_line_width)
-
-machine_extruder_count
-
-machine_head_polygon
-machine_head_with_fans_polygon
-machine_heat_zone_length
-
-magic_mesh_surface_mode
-
-meshfix_extensive_stitching
-meshfix_keep_open_polygons
-meshfix_union_all
-meshfix_union_all_remove_holes
-
-print_sequence
-
-raft_base_line_spacing	(from raft_line_spacing)
-raft_base_line_width
-raft_fan_speed
-raft_interface_fan_speed
-raft_interface_line_spacing
-raft_interface_speed
-raft_speed
-raft_surface_fan_speed
-raft_surface_line_spacing
-raft_surface_line_width
-raft_surface_speed
-raft_surface_thickness
-remove_overlapping_walls_0_enabled
-remove_overlapping_walls_enabled
-remove_overlapping_walls_x_enabled
-
-retraction_count_max
-retraction_extrusion_window  (from retraction_minimal_extrusion)
-retraction_extra_prime_amount
-
-skin_alternate_rotation
-
-speed_support_lines
-speed_support_roof
-
-support_conical_angle
-support_conical_enabled
-support_conical_min_width
-support_offset
-support_roof_enable
-support_roof_height
-support_roof_line_width
-
-travel_avoid_distance
-travel_avoid_other_parts
-travel_compensate_overlapping_walls_enabled
-
-z_seam_type
-
-
-[ DUAL EXTRUSION ]
-extruder_nr
-machine_use_extruder_offset_to_offset_coords
-machine_nozzle_offset_x
-machine_nozzle_offset_y
-machine_extruder_start_code
-machine_extruder_start_pos_abs
-machine_extruder_start_pos_x
-machine_extruder_start_pos_y
-machine_extruder_end_pos_abs
-machine_extruder_end_pos_x
-machine_extruder_end_pos_y
-machine_extruder_end_code
-prime_tower_enable
-prime_tower_size
-prime_tower_position_x
-prime_tower_position_y
-prime_tower_flow
-prime_tower_wipe_enabled
-ooze_shield_enabled
-ooze_shield_angle
-ooze_shield_dist
-
-
-

src/ExtruderTrain.h

@@ -1,23 +0,0 @@
-#ifndef EXTRUDER_TRAIN_H
-#define EXTRUDER_TRAIN_H
-
-#include "settings.h"
-
-namespace cura 
-{
-    
-class ExtruderTrain : public SettingsBase
-{
-    int extruder_nr;
-public:
-    int getExtruderNr() { return extruder_nr; }
-    
-    ExtruderTrain(SettingsBaseVirtual* settings, int extruder_nr)
-    : SettingsBase(settings)
-    , extruder_nr(extruder_nr)
-    { }
-    
-};
-
-}//namespace cura
-#endif // EXTRUDER_TRAIN_H

src/FanSpeedLayerTime.h

@@ -1,22 +0,0 @@
-#ifndef FAN_SPEED_LAYER_TIME_H
-#define FAN_SPEED_LAYER_TIME_H
-
-#include "settings.h"
-
-namespace cura 
-{
-
-struct FanSpeedLayerTimeSettings 
-{
-public:
-    double cool_min_layer_time;
-    double cool_min_layer_time_fan_speed_max;
-    double cool_fan_speed_min;
-    double cool_fan_speed_max;
-    double cool_min_speed;
-    int cool_fan_full_layer;
-};
-
-} // namespace cura
-
-#endif // FAN_SPEED_LAYER_TIME_H

src/FffGcodeWriter.h

@@ -1,358 +0,0 @@
-#ifndef GCODE_WRITER_H
-#define GCODE_WRITER_H
-
-
-#include <fstream>
-#include "utils/gettime.h"
-#include "utils/logoutput.h"
-#include "utils/NoCopy.h"
-#include "utils/polygonUtils.h"
-#include "sliceDataStorage.h"
-#include "raft.h"
-#include "infill.h"
-#include "bridge.h"
-#include "pathOrderOptimizer.h"
-#include "gcodePlanner.h"
-#include "gcodeExport.h"
-#include "commandSocket.h"
-#include "PrimeTower.h"
-#include "FanSpeedLayerTime.h"
-
-
-#include "LayerPlanBuffer.h"
-
-
-namespace cura 
-{
-
-/*!
- * Secondary stage in Fused Filament Fabrication processing: The generated polygons are used in the gcode generation.
- * Some polygons in the SliceDataStorage signify areas which are to be filled with parallel lines, 
- * while other polygons signify the contours which should be printed.
- * 
- * The main function of this class is FffGcodeWriter::writeGCode().
- */
-class FffGcodeWriter : public SettingsMessenger, NoCopy
-{
-    friend class FffProcessor; // cause WireFrame2Gcode uses the member [gcode] (TODO)
-private:
-    int max_object_height;
-    int meshgroup_number; //!< used for sequential printing of objects
-    
-    LayerPlanBuffer layer_plan_buffer;
-    
-    GCodeExport gcode;
-    CommandSocket* command_socket;
-    std::ofstream output_file;
-    
-    /*!
-     * Layer number of the last layer in which a prime tower has been printed per extruder train.  
-     * 
-     * This is recorded per extruder to account for a prime tower per extruder, instead of the mixed prime tower.
-     */
-    int last_prime_tower_poly_printed[MAX_EXTRUDERS]; 
-    
-    FanSpeedLayerTimeSettings fan_speed_layer_time_settings;
-    
-    Point last_position_planned; //!< The position of the head before planning the next layer
-    int current_extruder_planned; //!< The extruder train in use before planning the next layer
-public:
-    FffGcodeWriter(SettingsBase* settings_)
-    : SettingsMessenger(settings_)
-    , layer_plan_buffer(this, command_socket, gcode)
-    , last_position_planned(no_point)
-    , current_extruder_planned(0) // TODO: make configurable
-    {
-        meshgroup_number = 1;
-        max_object_height = 0;
-        command_socket = NULL;
-    }
-    void resetFileNumber()
-    {
-        meshgroup_number = 1;
-    }
-
-    void setCommandSocket(CommandSocket* socket)
-    {
-        command_socket = socket;
-    }
-
-    void sendPolygons(PolygonType type, int layer_nr, Polygons& polygons, int line_width)
-    {
-        if (command_socket)
-            command_socket->sendPolygons(type, layer_nr, polygons, line_width);
-    }
-        
-    bool setTargetFile(const char* filename)
-    {
-        output_file.open(filename);
-        if (output_file.is_open())
-        {
-            gcode.setOutputStream(&output_file);
-            return true;
-        }
-        return false;
-    }
-    
-    void setTargetStream(std::ostream* stream)
-    {
-        gcode.setOutputStream(stream);
-    }
-    
-    double getTotalFilamentUsed(int e)
-    {
-        return gcode.getTotalFilamentUsed(e);
-    }
-
-    double getTotalPrintTime()
-    {
-        return gcode.getTotalPrintTime();
-    }
-
-    void writeGCode(SliceDataStorage& storage, TimeKeeper& timeKeeper);
-    
-private:
-    void setConfigFanSpeedLayerTime();
-    
-    void setConfigCoasting(SliceDataStorage& storage);
-
-    //Setup the retraction parameters.
-    void setConfigRetraction(SliceDataStorage& storage);
-    
-    /*!
-     * initialize GcodePathConfig config parameters which don't change over all layers
-     */
-    void initConfigs(SliceDataStorage& storage);
-    
-    void setConfigWallReinforcement(SliceMeshStorage& mesh, int layer_thickness);
-    
-    /*!
-     * Set temperatures and perform initial priming.
-     * \param storage Input: where the slice data is stored.
-     */
-    void processStartingCode(SliceDataStorage& storage);
-
-    /*!
-     * Move up and over the just printed model to print the next model.
-     * \param storage Input: where the slice data is stored.
-     */
-    void processNextMeshGroupCode(SliceDataStorage& storage);
-    
-    /*!
-     * Add raft gcode.
-     * \param storage Input: where the slice data is stored.
-     * \param total_layers The total number of layers.
-     */
-    void processRaft(SliceDataStorage& storage, unsigned int total_layers);
-    
-    /*!
-     * Add a layer to the gcode.
-     * \param storage Input: where the slice data is stored.
-     * \param layer_nr The index of the layer to write the gcode of.
-     * \param total_layers The total number of layers.
-     * \param has_raft Whether a raft is used for this print.
-     */
-    void processLayer(SliceDataStorage& storage, unsigned int layer_nr, unsigned int total_layers, bool has_raft);
-    
-    /*!
-     * Add the skirt to the gcode.
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param extruder_nr The extrudewr train for which to process the skirt
-     */
-    void processSkirt(SliceDataStorage& storage, GCodePlanner& gcodeLayer, unsigned int extruder_nr);
-    
-    /*!
-     * Adds the ooze shield to the print.
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     */
-    void processOozeShield(SliceDataStorage& storage, GCodePlanner& gcodeLayer, unsigned int layer_nr);
-    
-    /*!
-     * Adds the draft protection screen to the print.
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     */
-    void processDraftShield(SliceDataStorage& storage, GCodePlanner& gcodeLayer, unsigned int layer_nr);
-    
-    /*!
-     * Calculate in which order to print the meshes.
-     * \param storage Input: where the slice data is stored.
-     * \param current_extruder The current extruder with which we last printed
-     * \return A vector of mesh indices ordered on print order.
-     */
-    std::vector<unsigned int> calculateMeshOrder(SliceDataStorage& storage, int current_extruder);
-        
-    /*!
-     * Add a single layer from a single mesh-volume to the GCode in mesh surface mode.
-     * \param storage Input: where the slice data is stored.
-     * \param mesh The mesh to add to the gcode.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     * 
-     */
-    void addMeshLayerToGCode_meshSurfaceMode(SliceDataStorage& storage, SliceMeshStorage* mesh, GCodePlanner& gcodeLayer, int layer_nr);
-    
-    /*!
-     * Add the open polylines from a single layer from a single mesh-volume to the GCode for mesh surface mode.
-     * \param storage Input: where the slice data is stored.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     * 
-     */
-    void addMeshOpenPolyLinesToGCode(SliceDataStorage& storage, SliceMeshStorage* mesh, GCodePlanner& gcode_layer, int layer_nr);
-    
-    /*!
-     * Add a single layer from a single mesh-volume to the GCode.
-     * \param storage Input: where the slice data is stored.
-     * \param mesh The mesh to add to the gcode.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     * 
-     */
-    void addMeshLayerToGCode(SliceDataStorage& storage, SliceMeshStorage* mesh, GCodePlanner& gcodeLayer, int layer_nr);
-    
-    /*!
-     * Add thicker (multiple layers) sparse infill for a given part in a layer.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param part The part for which to create gcode
-     * \param layer_nr The current layer number.
-     * \param infill_line_distance The distance between the infill lines
-     * \param infill_overlap The fraction of the extrusion width by which the infill overlaps with the wall insets.
-     * \param fillAngle The angle in the XY plane at which the infill is generated.
-     * \param extrusionWidth extrusionWidth
-     */
-    void processMultiLayerInfill(GCodePlanner& gcodeLayer, SliceMeshStorage* mesh, SliceLayerPart& part, unsigned int layer_nr, int infill_line_distance, double infill_overlap, int fillAngle, int extrusionWidth); 
-    
-    /*!
-     * Add normal sparse infill for a given part in a layer.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param part The part for which to create gcode
-     * \param layer_nr The current layer number.
-     * \param infill_line_distance The distance between the infill lines
-     * \param infill_overlap The fraction of the extrusion width by which the infill overlaps with the wall insets.
-     * \param fillAngle The angle in the XY plane at which the infill is generated.
-     * \param extrusionWidth extrusionWidth
-     */
-    void processSingleLayerInfill(GCodePlanner& gcodeLayer, SliceMeshStorage* mesh, SliceLayerPart& part, unsigned int layer_nr, int infill_line_distance, double infill_overlap, int fillAngle, int extrusionWidth);
-    
-    /*!
-     * Add wall reinforcement for a given part in a layer.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param reinforcement_wall The reinforcement wall for which to create gcode
-     * \param layer_nr The current layer number.
-     * \param wall_reinforcement_line_distance The distance between the infill lines
-     * \param infill_overlap The fraction of the extrusion width by which the infill overlaps with the wall insets.
-     * \param fillAngle The angle in the XY plane at which the infill is generated.
-     * \param wall_reinforcement_line_width extrusionWidth
-     * \param inside_out Whether to print from inside outward or other way around
-     */
-    void processWallReinforcement(GCodePlanner& gcode_layer, SliceMeshStorage* mesh, ReinforcementWall& reinforcement_wall, unsigned int layer_nr, int wall_reinforcement_line_distance, double infill_overlap, int infill_angle, int wall_reinforcement_line_width, bool inside_out);
-   
-    /*!
-     * Add the inner extra walls of the wall reinforcement for a given part in a layer.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param reinforcement_wall The reinforcement wall for which to create gcode
-     * \param layer_nr The current layer number.
-     * \param wall_reinforcement_line_width extrusionWidth
-     */
-    void processWallReinforcement_extraWalls(GCodePlanner& gcode_layer, SliceMeshStorage* mesh, ReinforcementWall& reinforcement_wall, unsigned int layer_nr, int wall_reinforcement_line_width, bool inside_out);
-    
-    /*!
-     * Add the infill of the wall reinforcement for a given part in a layer.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param reinforcement_wall The reinforcement wall for which to create gcode
-     * \param layer_nr The current layer number.
-     * \param wall_reinforcement_line_distance The distance between the infill lines
-     * \param infill_overlap The fraction of the extrusion width by which the infill overlaps with the wall insets.
-     * \param fillAngle The angle in the XY plane at which the infill is generated.
-     * \param wall_reinforcement_line_width extrusionWidth
-     */
-    void processWallReinforcement_infill(GCodePlanner& gcode_layer, SliceMeshStorage* mesh, ReinforcementWall& reinforcement_wall, unsigned int layer_nr, int wall_reinforcement_line_distance, double infill_overlap, int infill_angle, int wall_reinforcement_line_width);
-    
-    /*!
-     * Generate the insets for the walls of a given layer part.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param part The part for which to create gcode
-     * \param layer_nr The current layer number.
-     * \param z_seam_type dir3ective for where to start the outer paerimeter of a part
-     */
-    void processInsets(GCodePlanner& gcodeLayer, SliceMeshStorage* mesh, SliceLayerPart& part, unsigned int layer_nr, EZSeamType z_seam_type);
-    
-    
-    /*!
-     * Add the gcode of the top/bottom skin of the given part.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param mesh The mesh for which to add to the gcode.
-     * \param part The part for which to create gcode
-     * \param layer_nr The current layer number.
-     * \param infill_overlap The fraction of the extrusion width by which the infill overlaps with the wall insets.
-     * \param fillAngle The angle in the XY plane at which the infill is generated.
-     * \param extrusionWidth extrusionWidth
-     */
-    void processSkin(cura::GCodePlanner& gcode_layer, cura::SliceMeshStorage* mesh, cura::SliceLayerPart& part, unsigned int layer_nr, double infill_overlap, int infill_angle, int extrusion_width);
-    
-    /*!
-     * Add the support to the gcode of the current layer.
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     * \param extruder_nr_before The extruder number at the start of the layer (before other print parts aka the rest)
-     * \param before_rest Whether the function has been called before adding the rest to the gcode, or after.
-     */
-    void addSupportToGCode(SliceDataStorage& storage, GCodePlanner& gcodeLayer, int layer_nr, int extruder_nr_before, bool before_rest);
-    /*!
-     * Add the support lines/walls to the gcode of the current layer.
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     */
-    void addSupportInfillToGCode(SliceDataStorage& storage, GCodePlanner& gcodeLayer, int layer_nr);
-    /*!
-     * Add the support roofs to the gcode of the current layer.
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     */
-    void addSupportRoofsToGCode(SliceDataStorage& storage, GCodePlanner& gcodeLayer, int layer_nr);
-    
-    /*!
-     * Change to a new extruder, and add the prime tower instructions if the new extruder is different from the last.
-     * 
-     * On layer 0 this function adds the skirt for the nozzle it switches to, instead of the prime tower.
-     * 
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     * \param extruder_nr The extruder to which to switch
-     */
-    void setExtruder_addPrime(SliceDataStorage& storage, GCodePlanner& gcode_layer, int layer_nr, int extruder_nr);
-    
-    /*!
-     * Add the prime tower gcode for the current layer.
-     * \param storage Input: where the slice data is stored.
-     * \param gcodeLayer The initial planning of the gcode of the layer.
-     * \param layer_nr The index of the layer to write the gcode of.
-     * \param prev_extruder The current extruder with which we last printed.
-     */
-    void addPrimeTower(SliceDataStorage& storage, GCodePlanner& gcodeLayer, int layer_nr, int prev_extruder);
-    
-    /*!
-     * Add the end gcode and set all temperatures to zero.
-     */
-    void finalize();
-};
-
-}//namespace cura
-
-#endif // GCODE_WRITER_H

src/FffPolygonGenerator.cpp

@@ -1,576 +0,0 @@
-#include "FffPolygonGenerator.h"
-
-#include <algorithm>
-
-#include "slicer.h"
-#include "utils/gettime.h"
-#include "utils/logoutput.h"
-#include "MeshGroup.h"
-#include "support.h"
-#include "multiVolumes.h"
-#include "layerPart.h"
-#include "inset.h"
-#include "skirt.h"
-#include "skin.h"
-#include "infill.h"
-#include "raft.h"
-#include "debug.h"
-#include "Progress.h"
-
-namespace cura
-{
-
-    
-bool FffPolygonGenerator::generateAreas(SliceDataStorage& storage, MeshGroup* meshgroup, TimeKeeper& timeKeeper)
-{
-    if (commandSocket)
-        commandSocket->beginSendSlicedObject();
-    
-    if (!sliceModel(meshgroup, timeKeeper, storage)) 
-    {
-        return false;
-    }
-    
-    slices2polygons(storage, timeKeeper);
-    
-    return true;
-}
-
-bool FffPolygonGenerator::sliceModel(MeshGroup* meshgroup, TimeKeeper& timeKeeper, SliceDataStorage& storage) /// slices the model
-{
-    Progress::messageProgressStage(Progress::Stage::SLICING, &timeKeeper, commandSocket);
-    
-    storage.model_min = meshgroup->min();
-    storage.model_max = meshgroup->max();
-    storage.model_size = storage.model_max - storage.model_min;
-
-    log("Slicing model...\n");
-    int initial_layer_thickness = meshgroup->getSettingInMicrons("layer_height_0");
-    if(initial_layer_thickness <= 0) //Initial layer height of 0 is not allowed. Negative layer height is nonsense.
-    {
-        logError("Initial layer height %i is disallowed.",initial_layer_thickness);
-        return false;
-    }
-    int layer_thickness = meshgroup->getSettingInMicrons("layer_height");
-    if(layer_thickness <= 0) //Layer height of 0 is not allowed. Negative layer height is nonsense.
-    {
-        logError("Layer height %i is disallowed.",layer_thickness);
-        return false;
-    }
-    if (meshgroup->getSettingAsPlatformAdhesion("adhesion_type") == EPlatformAdhesion::RAFT) 
-    { 
-        initial_layer_thickness = layer_thickness; 
-    }
-    int initial_slice_z = initial_layer_thickness - layer_thickness / 2;
-    int layer_count = (storage.model_max.z - initial_slice_z) / layer_thickness + 1;
-    if(layer_count <= 0) //Model is shallower than layer_height_0, so not even the first layer is sliced. Return an empty model then.
-    {
-        Progress::messageProgressStage(Progress::Stage::INSET,&timeKeeper,commandSocket); //Continue directly with the inset stage, which will also immediately stop.
-        return true; //This is NOT an error state!
-    }
-
-    std::vector<Slicer*> slicerList;
-    for(unsigned int mesh_idx = 0; mesh_idx < meshgroup->meshes.size(); mesh_idx++)
-    {
-        Mesh& mesh = meshgroup->meshes[mesh_idx];
-        Slicer* slicer = new Slicer(&mesh, initial_slice_z, layer_thickness, layer_count, mesh.getSettingBoolean("meshfix_keep_open_polygons"), mesh.getSettingBoolean("meshfix_extensive_stitching"));
-        slicerList.push_back(slicer);
-        /*
-        for(SlicerLayer& layer : slicer->layers)
-        {
-            //Reporting the outline here slows down the engine quite a bit, so only do so when debugging.
-            //sendPolygons("outline", layer_nr, layer.z, layer.polygonList);
-            //sendPolygons("openoutline", layer_nr, layer.openPolygonList);
-        }
-        */
-        Progress::messageProgress(Progress::Stage::SLICING, mesh_idx + 1, meshgroup->meshes.size(), commandSocket);
-    }
-    
-    log("Layer count: %i\n", layer_count);
-
-    meshgroup->clear();///Clear the mesh face and vertex data, it is no longer needed after this point, and it saves a lot of memory.
-
-    Progress::messageProgressStage(Progress::Stage::PARTS, &timeKeeper, commandSocket);
-    //carveMultipleVolumes(storage.meshes);
-    generateMultipleVolumesOverlap(slicerList, getSettingInMicrons("multiple_mesh_overlap"));
-    
-    storage.meshes.reserve(slicerList.size()); // causes there to be no resize in meshes so that the pointers in sliceMeshStorage._config to retraction_config don't get invalidated.
-    for(unsigned int meshIdx=0; meshIdx < slicerList.size(); meshIdx++)
-    {
-        storage.meshes.emplace_back(&meshgroup->meshes[meshIdx]); // new mesh in storage had settings from the Mesh
-        SliceMeshStorage& meshStorage = storage.meshes.back();
-        Mesh& mesh = storage.meshgroup->meshes[meshIdx];
-        createLayerParts(meshStorage, slicerList[meshIdx], mesh.getSettingBoolean("meshfix_union_all"), mesh.getSettingBoolean("meshfix_union_all_remove_holes"));
-        delete slicerList[meshIdx];
-
-        bool has_raft = meshStorage.getSettingAsPlatformAdhesion("adhesion_type") == EPlatformAdhesion::RAFT;
-        //Add the raft offset to each layer.
-        for(unsigned int layer_nr=0; layer_nr<meshStorage.layers.size(); layer_nr++)
-        {
-            SliceLayer& layer = meshStorage.layers[layer_nr];
-            meshStorage.layers[layer_nr].printZ += 
-                meshStorage.getSettingInMicrons("layer_height_0")
-                - initial_slice_z;
-            if (has_raft)
-            {
-                layer.printZ += 
-                    meshStorage.getSettingInMicrons("raft_base_thickness") 
-                    + meshStorage.getSettingInMicrons("raft_interface_thickness") 
-                    + meshStorage.getSettingAsCount("raft_surface_layers") * getSettingInMicrons("raft_surface_thickness")
-                    + meshStorage.getSettingInMicrons("raft_airgap");
-            }
-    
- 
-            if (layer.parts.size() > 0 || (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") != ESurfaceMode::NORMAL && layer.openPolyLines.size() > 0) )
-            {
-                meshStorage.layer_nr_max_filled_layer = layer_nr; // last set by the highest non-empty layer
-            } 
-                
-            if (commandSocket)
-            {
-                commandSocket->sendLayerInfo(layer_nr, layer.printZ, layer_nr == 0? meshStorage.getSettingInMicrons("layer_height_0") : meshStorage.getSettingInMicrons("layer_height"));
-            }
-        }
-        
-        Progress::messageProgress(Progress::Stage::PARTS, meshIdx + 1, slicerList.size(), commandSocket);
-    }
-    
-    Progress::messageProgressStage(Progress::Stage::INSET, &timeKeeper, commandSocket);
-    return true;
-}
-
-void FffPolygonGenerator::slices2polygons(SliceDataStorage& storage, TimeKeeper& time_keeper)
-{
-    size_t total_layers = 0;
-    for (SliceMeshStorage& mesh : storage.meshes)
-    {
-        total_layers = std::max<unsigned int>(total_layers, mesh.layers.size());
-    }
-    
-    //layerparts2HTML(storage, "output/output.html");
-    for(unsigned int layer_number = 0; layer_number < total_layers; layer_number++)
-    {
-        processInsets(storage, layer_number);
-        
-        Progress::messageProgress(Progress::Stage::INSET, layer_number+1, total_layers, commandSocket);
-    }
-    
-    removeEmptyFirstLayers(storage, getSettingInMicrons("layer_height"), total_layers);
-    
-    if (total_layers < 1)
-    {
-        log("Stopping process because there are no layers.\n");
-        return;
-    }
-    
-    Progress::messageProgressStage(Progress::Stage::SUPPORT, &time_keeper, commandSocket);  
-            
-    AreaSupport::generateSupportAreas(storage, total_layers, commandSocket);
-    /*
-    if (storage.support.generated)
-    {
-        for (unsigned int layer_idx = 0; layer_idx < total_layers; layer_idx++)
-        {
-            Polygons& support = storage.support.supportLayers[layer_idx].supportAreas;
-            sendPolygons(SupportType, layer_idx, support, getSettingInMicrons("support_line_width"));
-        }
-    }
-    */
-    
-    Progress::messageProgressStage(Progress::Stage::SKIN, &time_keeper, commandSocket);
-    int mesh_max_bottom_layer_count = 0;
-    if (getSettingBoolean("magic_spiralize"))
-    {
-        for(SliceMeshStorage& mesh : storage.meshes)
-        {
-            mesh_max_bottom_layer_count = std::max(mesh_max_bottom_layer_count, mesh.getSettingAsCount("bottom_layers"));
-        }
-    }
-    for(unsigned int layer_number = 0; layer_number < total_layers; layer_number++)
-    {
-        if (!getSettingBoolean("magic_spiralize") || static_cast<int>(layer_number) < mesh_max_bottom_layer_count)    //Only generate up/downskin and infill for the first X layers when spiralize is choosen.
-        {
-            processSkinsAndInfill(storage, layer_number);
-        }
-        Progress::messageProgress(Progress::Stage::SKIN, layer_number+1, total_layers, commandSocket);
-    }
-    
-    for(unsigned int layer_number = 0; layer_number < total_layers; layer_number++)
-    {
-        processWallReinforcement(storage, layer_number);
-    }
-    
-    unsigned int combined_infill_layers = storage.getSettingInMicrons("infill_sparse_thickness") / std::max(storage.getSettingInMicrons("layer_height"),1); //How many infill layers to combine to obtain the requested sparse thickness.
-    for(SliceMeshStorage& mesh : storage.meshes)
-    {
-        combineInfillLayers(mesh,combined_infill_layers);
-    }
-
-    storage.primeTower.computePrimeTowerMax(storage);
-    storage.primeTower.generatePaths(storage, total_layers);
-    
-    processOozeShield(storage, total_layers);
-        
-    processDraftShield(storage, total_layers);
-    
-    processPlatformAdhesion(storage);
-
-    
-    for(SliceMeshStorage& mesh : storage.meshes)
-    {
-        if (mesh.getSettingBoolean("magic_fuzzy_skin_enabled"))
-        {
-            processFuzzyWalls(mesh);
-        }
-        else if (mesh.getSettingAsCount("wall_line_count") > 0)
-        { // only send polygon data
-            for (unsigned int layer_nr = 0; layer_nr < total_layers; layer_nr++)
-            {
-                SliceLayer* layer = &mesh.layers[layer_nr];
-                for(SliceLayerPart& part : layer->parts)
-                {
-                    sendPolygons(Inset0Type, layer_nr, (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") == ESurfaceMode::SURFACE)? part.outline : part.insets[0], mesh.getSettingInMicrons("wall_line_width_0"));
-                }
-            }
-        }
-    }
-}
-
-void FffPolygonGenerator::processInsets(SliceDataStorage& storage, unsigned int layer_nr) 
-{
-    for(SliceMeshStorage& mesh : storage.meshes)
-    {
-        SliceLayer* layer = &mesh.layers[layer_nr];
-        if (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") != ESurfaceMode::SURFACE)
-        {
-            int inset_count = mesh.getSettingAsCount("wall_line_count");
-            if (mesh.getSettingBoolean("magic_spiralize") && static_cast<int>(layer_nr) < mesh.getSettingAsCount("bottom_layers") && layer_nr % 2 == 1)//Add extra insets every 2 layers when spiralizing, this makes bottoms of cups watertight.
-                inset_count += 5;
-            int line_width_x = mesh.getSettingInMicrons("wall_line_width_x");
-            int line_width_0 = mesh.getSettingInMicrons("wall_line_width_0");
-            if (mesh.getSettingBoolean("alternate_extra_perimeter"))
-                inset_count += layer_nr % 2; 
-            generateInsets(layer, mesh.getSettingInMicrons("machine_nozzle_size"), line_width_0, line_width_x, inset_count, mesh.getSettingBoolean("remove_overlapping_walls_0_enabled"), mesh.getSettingBoolean("remove_overlapping_walls_x_enabled"));
-
-            for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
-            {
-                if (layer->parts[partNr].insets.size() > 0)
-                {
-//                     sendPolygons(Inset0Type, layer_nr, layer->parts[partNr].insets[0], line_width_0); // done after processing fuzzy skin
-                    for(unsigned int inset=1; inset<layer->parts[partNr].insets.size(); inset++)
-                        sendPolygons(InsetXType, layer_nr, layer->parts[partNr].insets[inset], line_width_x);
-                }
-            }
-        }
-        if (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") != ESurfaceMode::NORMAL)
-        {
-            for (PolygonRef polyline : layer->openPolyLines)
-            {
-                Polygons segments;
-                for (unsigned int point_idx = 1; point_idx < polyline.size(); point_idx++)
-                {
-                    PolygonRef segment = segments.newPoly();
-                    segment.add(polyline[point_idx-1]);
-                    segment.add(polyline[point_idx]);
-                }
-                sendPolygons(Inset0Type, layer_nr, segments, mesh.getSettingInMicrons("wall_line_width_0"));
-            }
-        }
-    }
-}
-
-
-void FffPolygonGenerator::processWallReinforcement(SliceDataStorage& storage, unsigned int layer_nr)
-{
-    for(SliceMeshStorage& mesh : storage.meshes)
-    { // generate infill area 
-        if (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") == ESurfaceMode::SURFACE)
-        {
-            continue;
-        }
-        if (mesh.getSettingInMicrons("wall_reinforcement_thickness") == 0.0 && mesh.getSettingAsCount("wall_reinforcement_line_count") == 0)
-        {
-            return;
-        }
-        int inset_count = mesh.getSettingAsCount("wall_reinforcement_line_count");
-        int wall_line_width = mesh.getSettingInMicrons("wall_line_width_x");
-        
-        SliceLayer* layer = &mesh.layers[layer_nr];
-        for (SliceLayerPart& part : layer->parts)
-        {
-            if (part.infill_area.size() == 0)
-            {
-                continue;
-            }
-            int wall_reinforcement_count = mesh.getSettingAsCount("wall_reinforcement_count");
-            part.reinforcement_walls.reserve(wall_reinforcement_count);
-            
-            
-            for (unsigned int wall_idx = 0; int(wall_idx) < wall_reinforcement_count; wall_idx++)
-            {
-                part.reinforcement_walls.emplace_back();
-                ReinforcementWall& reinforcement_wall = part.reinforcement_walls.back();
-                
-                Polygons outer_wall_reinforcement_edge = part.infill_area[0].offset(-mesh.getSettingInMicrons("wall_reinforcement_thickness"));
-                reinforcement_wall.wall_reinforcement_area = part.infill_area[0].difference(outer_wall_reinforcement_edge);
-                if (mesh.getSettingAsCount("wall_reinforcement_line_count") > 0)
-                {
-                    reinforcement_wall.wall_reinforcement_axtra_walls.push_back(outer_wall_reinforcement_edge.offset(-wall_line_width/2));
-                }
-                else 
-                {
-                    part.infill_area[0] = outer_wall_reinforcement_edge.offset(-wall_line_width/2);
-                }
-        
-                // generate reinforcement wall extra walls
-
-                if (reinforcement_wall.wall_reinforcement_axtra_walls.size() == 0)
-                {
-                    continue;
-                }
-                generateWallReinforcementWallExtraWalls(&part, reinforcement_wall, wall_line_width, inset_count, mesh.getSettingBoolean("remove_overlapping_walls_x_enabled"));
-                
-                if (reinforcement_wall.wall_reinforcement_axtra_walls.size() > 0)
-                {
-                    part.infill_area[0] = reinforcement_wall.wall_reinforcement_axtra_walls.back().offset(-wall_line_width/2); // update the infill area to one reinforcement wall insetted (updated each time a reinforcement wall is generated)
-                }
-                if (part.insets.size() > 0)
-                {
-                    for(Polygons& polys : reinforcement_wall.wall_reinforcement_axtra_walls)
-                        sendPolygons(SupportType, layer_nr, polys, wall_line_width);
-                }
-            }
-        }
-    }
-}
-
-void FffPolygonGenerator::removeEmptyFirstLayers(SliceDataStorage& storage, int layer_height, unsigned int total_layers)
-{ 
-    int n_empty_first_layers = 0;
-    for (unsigned int layer_idx = 0; layer_idx < total_layers; layer_idx++)
-    { 
-        bool layer_is_empty = true;
-        for (SliceMeshStorage& mesh : storage.meshes)
-        {
-            SliceLayer& layer = mesh.layers[layer_idx];
-            if (layer.parts.size() > 0 || (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") != ESurfaceMode::NORMAL && layer.openPolyLines.size() > 0) )
-            {
-                layer_is_empty = false;
-                break;
-            }
-        }
-        
-        if (layer_is_empty) 
-        {
-            n_empty_first_layers++;
-        } else
-        {
-            break;
-        }
-    }
-    
-    if (n_empty_first_layers > 0)
-    {
-        log("Removing %d layers because they are empty\n", n_empty_first_layers);
-        for (SliceMeshStorage& mesh : storage.meshes)
-        {
-            std::vector<SliceLayer>& layers = mesh.layers;
-            layers.erase(layers.begin(), layers.begin() + n_empty_first_layers);
-            for (SliceLayer& layer : layers)
-            {
-                layer.printZ -= n_empty_first_layers * layer_height;
-            }
-        }
-        total_layers -= n_empty_first_layers;
-    }
-}
-  
-void FffPolygonGenerator::processSkinsAndInfill(SliceDataStorage& storage, unsigned int layer_nr) 
-{
-    for(SliceMeshStorage& mesh : storage.meshes)
-    {
-        if (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") == ESurfaceMode::SURFACE) { continue; }
-        
-        int wall_line_count = mesh.getSettingAsCount("wall_line_count");
-        int skin_extrusion_width = mesh.getSettingInMicrons("skin_line_width");
-        int innermost_wall_extrusion_width = mesh.getSettingInMicrons("wall_line_width_x");
-        int extrusionWidth_infill = mesh.getSettingInMicrons("infill_line_width");
-        generateSkins(layer_nr, mesh, skin_extrusion_width, mesh.getSettingAsCount("bottom_layers"), mesh.getSettingAsCount("top_layers"), wall_line_count, innermost_wall_extrusion_width, mesh.getSettingAsCount("skin_outline_count"), mesh.getSettingBoolean("skin_no_small_gaps_heuristic"), mesh.getSettingBoolean("remove_overlapping_walls_0_enabled"), mesh.getSettingBoolean("remove_overlapping_walls_x_enabled"));
-        if (mesh.getSettingInMicrons("infill_line_distance") > 0)
-        {
-            int infill_skin_overlap = 0;
-            if (mesh.getSettingInMicrons("infill_line_distance") > mesh.getSettingInMicrons("infill_line_width") + 10)
-            {
-                infill_skin_overlap = skin_extrusion_width / 2;
-            }
-            generateInfill(layer_nr, mesh, extrusionWidth_infill, infill_skin_overlap, wall_line_count);
-            if (mesh.getSettingAsFillPerimeterGapMode("fill_perimeter_gaps") == FillPerimeterGapMode::SKIN)
-            {
-                generatePerimeterGaps(layer_nr, mesh, skin_extrusion_width, mesh.getSettingAsCount("bottom_layers"), mesh.getSettingAsCount("top_layers"));
-            }
-            else if (mesh.getSettingAsFillPerimeterGapMode("fill_perimeter_gaps") == FillPerimeterGapMode::EVERYWHERE)
-            {
-                generatePerimeterGaps(layer_nr, mesh, skin_extrusion_width, 0, 0);
-            }
-        }
-
-        bool frontend_can_show_polygon_as_filled_polygon = false;
-        if (frontend_can_show_polygon_as_filled_polygon)
-        {
-            SliceLayer& layer = mesh.layers[layer_nr];
-            for(SliceLayerPart& part : layer.parts)
-            {
-//                  sendPolygons(InfillType, layer_nr, part.infill_area[0], extrusionWidth_infill); // sends the outline, not the actual infill
-                for (SkinPart& skin_part : part.skin_parts)
-                {
-                    sendPolygons(SkinType, layer_nr, skin_part.outline, innermost_wall_extrusion_width);
-                }
-            }
-        }
-    }
-}
-
-void FffPolygonGenerator::processOozeShield(SliceDataStorage& storage, unsigned int total_layers)
-{
-    if (!getSettingBoolean("ooze_shield_enabled"))
-    {
-        return;
-    }
-    
-    int ooze_shield_dist = getSettingInMicrons("ooze_shield_dist");
-    
-    for(unsigned int layer_nr=0; layer_nr<total_layers; layer_nr++)
-    {
-        storage.oozeShield.push_back(storage.getLayerOutlines(layer_nr, true).offset(ooze_shield_dist));
-    }
-    
-    int largest_printed_radius = MM2INT(1.0); // TODO: make var a parameter, and perhaps even a setting?
-    for(unsigned int layer_nr=0; layer_nr<total_layers; layer_nr++)
-    {
-        storage.oozeShield[layer_nr] = storage.oozeShield[layer_nr].offset(-largest_printed_radius).offset(largest_printed_radius); 
-    }
-    int allowed_angle_offset = tan(getSettingInAngleRadians("ooze_shield_angle")) * getSettingInMicrons("layer_height");//Allow for a 60deg angle in the oozeShield.
-    for(unsigned int layer_nr=1; layer_nr<total_layers; layer_nr++)
-    {
-        storage.oozeShield[layer_nr] = storage.oozeShield[layer_nr].unionPolygons(storage.oozeShield[layer_nr-1].offset(-allowed_angle_offset));
-    }
-    for(unsigned int layer_nr=total_layers-1; layer_nr>0; layer_nr--)
-    {
-        storage.oozeShield[layer_nr-1] = storage.oozeShield[layer_nr-1].unionPolygons(storage.oozeShield[layer_nr].offset(-allowed_angle_offset));
-    }
-}
-
-void FffPolygonGenerator::processDraftShield(SliceDataStorage& storage, unsigned int total_layers)
-{
-    int draft_shield_height = getSettingInMicrons("draft_shield_height");
-    int draft_shield_dist = getSettingInMicrons("draft_shield_dist");
-    int layer_height_0 = getSettingInMicrons("layer_height_0");
-    int layer_height = getSettingInMicrons("layer_height");
-    
-    if (draft_shield_height < layer_height_0)
-    {
-        return;
-    }
-    
-    unsigned int max_screen_layer = (draft_shield_height - layer_height_0) / layer_height + 1;
-    
-    int layer_skip = 500 / layer_height + 1;
-    
-    Polygons& draft_shield = storage.draft_protection_shield;
-    for (unsigned int layer_nr = 0; layer_nr < total_layers && layer_nr < max_screen_layer; layer_nr += layer_skip)
-    {
-        draft_shield = draft_shield.unionPolygons(storage.getLayerOutlines(layer_nr, true));
-    }
-    
-    storage.draft_protection_shield = draft_shield.convexHull(draft_shield_dist);
-}
-
-void FffPolygonGenerator::processPlatformAdhesion(SliceDataStorage& storage)
-{
-    switch(getSettingAsPlatformAdhesion("adhesion_type"))
-    {
-    case EPlatformAdhesion::SKIRT:
-        if (getSettingInMicrons("draft_shield_height") == 0)
-        { // draft screen replaces skirt
-            generateSkirt(storage, getSettingInMicrons("skirt_gap"), getSettingAsCount("skirt_line_count"), getSettingInMicrons("skirt_minimal_length"));
-        }
-        break;
-    case EPlatformAdhesion::BRIM:
-        generateSkirt(storage, 0, getSettingAsCount("brim_line_count"), getSettingInMicrons("skirt_minimal_length"));
-        break;
-    case EPlatformAdhesion::RAFT:
-        generateRaft(storage, getSettingInMicrons("raft_margin"));
-        break;
-    }
-    
-    Polygons skirt_sent = storage.skirt[0];
-    for (int extruder = 1; extruder < storage.meshgroup->getExtruderCount(); extruder++)
-        skirt_sent.add(storage.skirt[extruder]);
-    sendPolygons(SkirtType, 0, skirt_sent, getSettingInMicrons("skirt_line_width"));
-}
-
-
-void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
-{
-    if (mesh.getSettingAsCount("wall_line_count") == 0)
-    {
-        return;
-    }
-    int64_t fuzziness = mesh.getSettingInMicrons("magic_fuzzy_skin_thickness");
-    int64_t avg_dist_between_points = mesh.getSettingInMicrons("magic_fuzzy_skin_point_dist");
-    int64_t min_dist_between_points = avg_dist_between_points * 3 / 4; // hardcoded: the point distance may vary between 3/4 and 5/4 the supplied value
-    int64_t range_random_point_dist = avg_dist_between_points / 2;
-    for (unsigned int layer_nr = 0; layer_nr < mesh.layers.size(); layer_nr++)
-    {
-        SliceLayer& layer = mesh.layers[layer_nr];
-        for (SliceLayerPart& part : layer.parts)
-        {
-            Polygons results;
-            Polygons& skin = (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") == ESurfaceMode::SURFACE)? part.outline : part.insets[0];
-            for (PolygonRef poly : skin)
-            {
-                // generate points in between p0 and p1
-                PolygonRef result = results.newPoly();
-                
-                int64_t dist_left_over = rand() % (min_dist_between_points / 2); // the distance to be traversed on the line before making the first new point
-                Point* p0 = &poly.back();
-                for (Point& p1 : poly)
-                { // 'a' is the (next) new point between p0 and p1
-                    Point p0p1 = p1 - *p0;
-                    int64_t p0p1_size = vSize(p0p1);    
-                    int64_t dist_last_point = dist_left_over + p0p1_size * 2; // so that p0p1_size - dist_last_point evaulates to dist_left_over - p0p1_size
-                    for (int64_t p0pa_dist = dist_left_over; p0pa_dist < p0p1_size; p0pa_dist += min_dist_between_points + rand() % range_random_point_dist)
-                    {
-                        int r = rand() % (fuzziness * 2) - fuzziness;
-                        Point perp_to_p0p1 = crossZ(p0p1);
-                        Point fuzz = normal(perp_to_p0p1, r);
-                        Point pa = *p0 + normal(p0p1, p0pa_dist) + fuzz;
-                        result.add(pa);
-                        dist_last_point = p0pa_dist;
-                    }
-                    dist_left_over = p0p1_size - dist_last_point;
-                    
-                    p0 = &p1;
-                }
-                while (result.size() < 3 )
-                {
-                    unsigned int point_idx = poly.size() - 2;
-                    result.add(poly[point_idx]);
-                    if (point_idx == 0) { break; }
-                    point_idx--;
-                }
-                if (result.size() < 3)
-                {
-                    result.clear();
-                    for (Point& p : poly)
-                        result.add(p);
-                }
-            }
-            skin = results;
-            sendPolygons(Inset0Type, layer_nr, skin, mesh.getSettingInMicrons("wall_line_width_0"));
-        }
-    }
-}
-
-
-}//namespace cura

src/FffPolygonGenerator.h

@@ -1,152 +0,0 @@
-#ifndef FFF_AREA_GENERATOR_H
-#define FFF_AREA_GENERATOR_H
-
-
-#include "MeshGroup.h"
-#include "utils/polygonUtils.h"
-#include "utils/NoCopy.h"
-#include "utils/gettime.h"
-#include "settings.h"
-#include "sliceDataStorage.h"
-#include "commandSocket.h"
-
-namespace cura
-{
-
-/*!
- * Primary stage in Fused Filament Fabrication processing: Polygons are generated.
- * The model is sliced and each slice consists of polygons representing the outlines: the boundaries between inside and outside the object.
- * After slicing, the layers are processed; for example the wall insets are generated, and the areas which are to be filled with support and infill, which are all represented by polygons.
- * In this stage nothing other than areas and circular paths are generated, which are both represented by polygons.
- * No infill lines or support pattern etc. is generated.
- * 
- * The main function of this class is FffPolygonGenerator::generateAreas().
- */
-class FffPolygonGenerator : public SettingsMessenger, NoCopy
-{
-private:
-    CommandSocket* commandSocket;
-public:
-    /*!
-     * Basic constructor; doesn't set the FffAreaGenerator::commandSocket .
-     */
-    FffPolygonGenerator(SettingsBase* settings_)
-    : SettingsMessenger(settings_)
-    , commandSocket(nullptr)
-    {
-    }
-    
-    /*!
-     * Set the FffAreaGenerator::commandSocket
-     */
-    void setCommandSocket(CommandSocket* socket)
-    {
-        commandSocket = socket;
-    }
-    
-
-    /*!
-     * Slice the \p object, process the outline information into inset perimeter polygons, support area polygons, etc. 
-     * 
-     * \param object The object to slice.
-     * \param timeKeeper Object which keeps track of timings of each stage.
-     * \param storage Output parameter: where the outlines are stored. See SliceLayerPart::outline.
-     */
-    bool generateAreas(SliceDataStorage& storage, MeshGroup* object, TimeKeeper& timeKeeper);
-  
-private:
-    /*!
-     * Send polygons over the command socket, if there is one.
-     * \param type The type of polygon to send
-     * \param layer_nr The layer number at which the polygons occur
-     * \param polygons The polygons to be sent
-     */
-    void sendPolygons(PolygonType type, int layer_nr, Polygons& polygons, int line_width)
-    {
-        if (commandSocket)
-            commandSocket->sendPolygons(type, layer_nr, polygons, line_width);
-    }
-    
-    /*!
-     * Slice the \p object and store the outlines in the \p storage.
-     * 
-     * \param object The object to slice.
-     * \param timeKeeper Object which keeps track of timings of each stage.
-     * \param storage Output parameter: where the outlines are stored. See SliceLayerPart::outline.
-     * 
-     * \return Whether the process succeeded (always true).
-     */
-    bool sliceModel(MeshGroup* object, TimeKeeper& timeKeeper, SliceDataStorage& storage); /// slices the model
-
-    /*!
-     * Processes the outline information as stored in the \p storage: generates inset perimeter polygons, support area polygons, etc. 
-     * 
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     * \param timeKeeper Object which keeps track of timings of each stage.
-     */
-    void slices2polygons(SliceDataStorage& storage, TimeKeeper& timeKeeper);
-    
-    /*!
-     * Remove all bottom layers which are empty.
-     * \param storage Input and Ouput parameter: stores all layers
-     * \param layer_height The height of each layer
-     * \param total_layers The total number of layers
-     */
-    void removeEmptyFirstLayers(SliceDataStorage& storage, int layer_height, unsigned int total_layers);
-    
-    /*!
-     * Generate the inset polygons which form the walls.
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     * \param layer_nr The layer for which to generate the insets.
-     */
-    void processInsets(SliceDataStorage& storage, unsigned int layer_nr);
-
-    /*!
-     * Generate the wall reinforcement extra wall polygons and its infill area which form the reinforcement.
-     * 
-     * Also redefines the infill area;
-     * 
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     * \param layer_nr The layer for which to generate the insets.
-     */
-    void processWallReinforcement(SliceDataStorage& storage, unsigned int layer_nr);
-    /*!
-     * Generate the outline of the ooze shield.
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     * \param total_layers The total number of layers 
-     */
-    void processOozeShield(SliceDataStorage& storage, unsigned int total_layers);
-    
-    /*!
-     * Generate the skin areas.
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     * \param layer_nr The layer for which to generate the skin areas.
-     */
-    void processSkinsAndInfill(SliceDataStorage& storage, unsigned int layer_nr); 
-
-    /*!
-     * Generate the polygons where the draft screen should be.
-     * 
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     * \param total_layers The total number of layers 
-     */
-    void processDraftShield(SliceDataStorage& storage, unsigned int total_layers);
-    /*!
-     * Generate the skirt/brim/raft areas/insets.
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     */
-    void processPlatformAdhesion(SliceDataStorage& storage);
-    
-    
-    
-    /*!
-     * Make the outer wall 'fuzzy'
-     */
-    void processFuzzyWalls(SliceMeshStorage& mesh);
-    
-    
-
-    
-};
-}//namespace cura
-#endif // FFF_AREA_GENERATOR_H

src/FffProcessor.cpp

@@ -1,110 +0,0 @@
-#include "FffProcessor.h" 
-
-namespace cura 
-{
-
-FffProcessor FffProcessor::instance; // definition must be in cpp
-
-
-std::string FffProcessor::getAllSettingsString(MeshGroup& meshgroup, bool first_meshgroup)
-{
-    std::stringstream sstream;
-    if (first_meshgroup)
-    {
-        sstream << " -g";
-    }
-    else 
-    {
-        sstream << " --next";
-    }
-    sstream << meshgroup.getAllLocalSettingsString();
-    for (int extruder_nr = 0; extruder_nr < meshgroup.getExtruderCount(); extruder_nr++)
-    {
-        ExtruderTrain* train = meshgroup.getExtruderTrain(extruder_nr);
-        sstream << " -e" << extruder_nr << train->getAllLocalSettingsString();
-    }
-    for (unsigned int mesh_idx = 0; mesh_idx < meshgroup.meshes.size(); mesh_idx++)
-    {
-        Mesh& mesh = meshgroup.meshes[mesh_idx];
-        sstream << " -e" << mesh.getSettingAsCount("extruder_nr") << " -l \"" << mesh_idx << "\"" << mesh.getAllLocalSettingsString();
-    }
-    sstream << "\n";
-    return sstream.str();
-}
-
-bool FffProcessor::processFiles(const std::vector< std::string >& files)
-{
-    time_keeper.restart();
-    MeshGroup* meshgroup = new MeshGroup(this);
-    
-    for(std::string filename : files)
-    {
-        log("Loading %s from disk...\n", filename.c_str());
-
-        FMatrix3x3 matrix;
-        if (!loadMeshIntoMeshGroup(meshgroup, filename.c_str(), matrix))
-        {
-            logError("Failed to load model: %s\n", filename.c_str());
-            return false;
-        }
-    }
-    
-    meshgroup->finalize();
-
-    log("Loaded from disk in %5.3fs\n", time_keeper.restart());
-    return processMeshGroup(meshgroup);
-}
-
-bool FffProcessor::processMeshGroup(MeshGroup* meshgroup)
-{
-    if (SHOW_ALL_SETTINGS) { logWarning(getAllSettingsString(*meshgroup, first_meshgroup).c_str()); }
-    time_keeper.restart();
-    if (!meshgroup)
-        return false;
-
-    TimeKeeper time_keeper_total;
-    
-    if (meshgroup->meshes.empty())
-    {
-        Progress::messageProgress(Progress::Stage::FINISH, 1, 1, command_socket); //Report the GUI that a file has been fully processed.
-        log("Total time elapsed %5.2fs.\n", time_keeper_total.restart());
-
-        profile_string += getAllSettingsString(*meshgroup, first_meshgroup);
-        return true;
-    }
-    
-    if (meshgroup->getSettingBoolean("wireframe_enabled"))
-    {
-        log("starting Neith Weaver...\n");
-                    
-        Weaver w(this);
-        w.weave(meshgroup, command_socket);
-        
-        log("starting Neith Gcode generation...\n");
-        Wireframe2gcode gcoder(w, gcode_writer.gcode, this);
-        gcoder.writeGCode(command_socket);
-        log("finished Neith Gcode generation...\n");
-        
-    } else 
-    {
-        SliceDataStorage storage(meshgroup);
-
-        if (!polygon_generator.generateAreas(storage, meshgroup, time_keeper))
-        {
-            return false;
-        }
-        gcode_writer.setCommandSocket(command_socket);
-        
-        Progress::messageProgressStage(Progress::Stage::EXPORT, &time_keeper, command_socket);
-        gcode_writer.writeGCode(storage, time_keeper);
-    }
-
-    Progress::messageProgress(Progress::Stage::FINISH, 1, 1, command_socket); //Report the GUI that a file has been fully processed.
-    log("Total time elapsed %5.2fs.\n", time_keeper_total.restart());
-
-    profile_string += getAllSettingsString(*meshgroup, first_meshgroup);
-    first_meshgroup = false;
-    return true;
-}
-
-} // namespace cura 

src/FffProcessor.h

@@ -1,97 +0,0 @@
-#ifndef FFF_PROCESSOR_H
-#define FFF_PROCESSOR_H
-
-#include "settings.h"
-#include "FffGcodeWriter.h"
-#include "FffPolygonGenerator.h"
-#include "commandSocket.h"
-#include "Weaver.h"
-#include "Wireframe2gcode.h"
-#include "Progress.h"
-#include "utils/gettime.h"
-#include "utils/NoCopy.h"
-
-#define SHOW_ALL_SETTINGS true
-
-namespace cura {
-
-//FusedFilamentFabrication processor. Singleton class
-class FffProcessor : public SettingsBase , NoCopy
-{
-private:
-    static FffProcessor instance; 
-    
-    FffProcessor()
-    : polygon_generator(this)
-    , gcode_writer(this)
-    , first_meshgroup(true)
-    {
-        command_socket = NULL;
-    }
-public:
-    static FffProcessor* getInstance() 
-    { 
-        return &instance; 
-    }
-    
-private:
-    FffPolygonGenerator polygon_generator;
-    FffGcodeWriter gcode_writer;
-    CommandSocket* command_socket; // TODO: replace all refs to command_socket by CommandSocket::getInstance()
-    
-    bool first_meshgroup;
-    
-    std::string profile_string = "";
-    
-    std::string getAllSettingsString(MeshGroup& meshgroup, bool first_meshgroup);
-    
-public:
-    std::string getProfileString() { return profile_string; }
-    
-    TimeKeeper time_keeper; // TODO: use singleton time keeper
-    
-    void resetFileNumber()
-    {
-        gcode_writer.resetFileNumber();
-    }
-
-    void setCommandSocket(CommandSocket* socket)
-    {
-        command_socket = socket;
-        gcode_writer.setCommandSocket(socket);
-        polygon_generator.setCommandSocket(socket);
-    }
-    
-    bool setTargetFile(const char* filename)
-    {
-        return gcode_writer.setTargetFile(filename);
-    }
-    
-    void setTargetStream(std::ostream* stream)
-    {
-        return gcode_writer.setTargetStream(stream);
-    }
-
-    double getTotalFilamentUsed(int e)
-    {
-        return gcode_writer.getTotalFilamentUsed(e);
-    }
-
-    double getTotalPrintTime()
-    {
-        return gcode_writer.getTotalPrintTime();
-    }
-    
-    void finalize()
-    {
-        gcode_writer.finalize();
-    }
-
-    bool processFiles(const std::vector<std::string> &files);
-    
-    bool processMeshGroup(MeshGroup* meshgroup);
-};
-
-}//namespace cura
-
-#endif//FFF_PROCESSOR_H

src/FlowTempGraph.h

@@ -1,77 +0,0 @@
-#ifndef FLOW_TEMP_GRAPH
-#define FLOW_TEMP_GRAPH
-
-#include <cassert>
-
-#include "utils/logoutput.h"
-
-namespace cura
-{
-
-/*!
- * Class representing a graph matching a flow to a temperature.
- * The graph generally consists of several linear line segments between points at which the temperature and flow are matched.
- */
-class FlowTempGraph
-{
-public:
-    struct Datum
-    {
-        double flow; //!< The flow in mm^3/s
-        double temp; //!< The temperature in *C
-        Datum(double flow, double temp)
-        : flow(flow)
-        , temp(temp)
-        {}
-    };
-    std::vector<Datum> data; //!< The points of the graph between which the graph is linearly interpolated
-
-    FlowTempGraph()
-    {}
-    
-    /*!
-     * Get the temperature corresponding to a specific flow.
-     * 
-     * For flows outside of the chart, the temperature at the minimal or maximal flow is returned.
-     * When the graph is empty, the @p material_print_temperature is returned.
-     * 
-     * \param flow the flow in mm^3/s
-     * \param material_print_temperature The default printing temp (backward compatibility for when the graph fails)
-     * \return the corresponding temp
-     */
-    double getTemp(double flow, double material_print_temperature, bool flow_dependent_temperature)
-    {
-        if (!flow_dependent_temperature || data.size() == 0)
-        {
-            return material_print_temperature;
-        }
-        if (data.size() == 1)
-        {
-            return data.front().temp;
-        }
-        if (flow < data.front().flow)
-        {
-            logWarning("Warning! Flow too low!\n"); // TODO
-            return data.front().temp;
-        }
-        Datum* last_datum = &data.front();
-        for (unsigned int datum_idx = 1; datum_idx < data.size(); datum_idx++)
-        {
-            Datum& datum = data[datum_idx];
-            if (datum.flow >= flow)
-            {
-                return last_datum->temp + (datum.temp - last_datum->temp) * (flow - last_datum->flow) / (datum.flow - last_datum->flow);
-            }
-            last_datum = &datum;
-        }
-        
-        logWarning("Warning! Flow too high!\n"); // TODO
-        return data.back().temp;
-    };
-};
-
-
-
-} // namespace cura
-
-#endif // FLOW_TEMP_GRAPH

src/LayerPlanBuffer.cpp

@@ -1,227 +0,0 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
-
-#include "LayerPlanBuffer.h"
-#include "gcodeExport.h"
-#include "utils/logoutput.h"
-
-namespace cura {
-
-
-
-void LayerPlanBuffer::flush()
-{
-    if (buffer.size() > 0)
-    {
-        insertPreheatCommands(); // insert preheat commands of the very last layer
-    }
-    for (GCodePlanner& layer_plan : buffer)
-    {
-        layer_plan.writeGCode(gcode, getSettingBoolean("cool_lift_head"), layer_plan.getLayerNr() > 0 ? getSettingInMicrons("layer_height") : getSettingInMicrons("layer_height_0"));
-        if (command_socket)
-            command_socket->sendGCodeLayer();
-    }
-}
-
-void LayerPlanBuffer::insertPreheatCommand(ExtruderPlan& extruder_plan_before, double time_after_extruder_plan_start, int extruder, double temp)
-{
-    double acc_time = 0.0;
-    for (unsigned int path_idx = 0; path_idx < extruder_plan_before.paths.size(); path_idx++)
-    {
-        GCodePath& path = extruder_plan_before.paths[path_idx];
-        acc_time += path.estimates.getTotalTime();
-        if (acc_time > time_after_extruder_plan_start)
-        {
-//                 logError("Inserting %f\t seconds too early!\n", acc_time - time_after_extruder_plan_start);
-            extruder_plan_before.insertCommand(path_idx, extruder, temp, false, acc_time - time_after_extruder_plan_start);
-            return;
-        }
-    }
-    extruder_plan_before.insertCommand(extruder_plan_before.paths.size(), extruder, temp, false); // insert at end of extruder plan if time_after_extruder_plan_start > extruder_plan.time 
-    // = special insert after all extruder plans
-}
-
-double LayerPlanBuffer::timeBeforeExtruderPlanToInsert(std::vector<GCodePlanner*>& layers, unsigned int layer_plan_idx, unsigned int extruder_plan_idx)
-{
-    ExtruderPlan& extruder_plan = layers[layer_plan_idx]->extruder_plans[extruder_plan_idx];
-    int extruder = extruder_plan.extruder;
-    double required_temp = extruder_plan.required_temp;
-    
-    unsigned int extruder_plan_before_idx = extruder_plan_idx - 1;
-    bool first_it = true;
-    double in_between_time = 0.0;
-    for (unsigned int layer_idx = layer_plan_idx; int(layer_idx) >= 0; layer_idx--)
-    {
-        GCodePlanner& layer = *layers[layer_idx];
-        if (!first_it)
-        {
-            extruder_plan_before_idx = layer.extruder_plans.size() - 1;
-        }
-        for ( ; int(extruder_plan_before_idx) >= 0; extruder_plan_before_idx--)
-        {
-            ExtruderPlan& extruder_plan = layer.extruder_plans[extruder_plan_before_idx];
-            if (extruder_plan.extruder == extruder)
-            {
-                return preheat_config.timeBeforeEndToInsertPreheatCommand_coolDownWarmUp(in_between_time, extruder, required_temp);
-            }
-            in_between_time += extruder_plan.estimates.getTotalTime();
-        }
-        first_it = false;
-    }
-    // The last extruder plan with the same extruder falls outside of the buffer
-    // assume the nozzle has cooled down to strandby temperature already.
-    return preheat_config.timeBeforeEndToInsertPreheatCommand_warmUp(preheat_config.getStandbyTemp(extruder), extruder, required_temp, false);
-    
-}
-
-void LayerPlanBuffer::insertPreheatCommand_singleExtrusion(ExtruderPlan& prev_extruder_plan, int extruder, double required_temp)
-{
-    // time_before_extruder_plan_end is halved, so that at the layer change the temperature will be half way betewen the two requested temperatures
-    double time_before_extruder_plan_end = 0.5 * preheat_config.timeBeforeEndToInsertPreheatCommand_warmUp(prev_extruder_plan.required_temp, extruder, required_temp, true);
-    double time_after_extruder_plan_start = prev_extruder_plan.estimates.getTotalTime() - time_before_extruder_plan_end;
-    if (time_after_extruder_plan_start < 0)
-    {
-        time_after_extruder_plan_start = 0; // don't override the extruder plan with same extruder of the previous layer
-    }
-        
-    insertPreheatCommand(prev_extruder_plan, time_after_extruder_plan_start, extruder, required_temp);
-}
-
-void LayerPlanBuffer::insertPreheatCommand_multiExtrusion(std::vector<GCodePlanner*>& layers, unsigned int layer_plan_idx, unsigned int extruder_plan_idx)
-{
-    ExtruderPlan& extruder_plan = layers[layer_plan_idx]->extruder_plans[extruder_plan_idx];
-    int extruder = extruder_plan.extruder;
-    double required_temp = extruder_plan.required_temp;
-    
-    extruder_plan.insertCommand(0, extruder, required_temp, true); // just after the extruder switch, wait for the destination temperature to be reached
-    
-    double time_before_extruder_plan_to_insert = timeBeforeExtruderPlanToInsert(layers, layer_plan_idx, extruder_plan_idx);
-    
-    unsigned int extruder_plan_before_idx = extruder_plan_idx - 1;
-    bool first_it = true; // Whether it's the first iteration of the for loop below
-    for (unsigned int layer_idx = layer_plan_idx; int(layer_idx) >= 0; layer_idx--)
-    {
-        GCodePlanner& layer = *layers[layer_idx];
-        if (!first_it)
-        {
-            extruder_plan_before_idx = layer.extruder_plans.size() - 1;
-        }
-        for ( ; int(extruder_plan_before_idx) >= 0; extruder_plan_before_idx--)
-        {
-            ExtruderPlan& extruder_plan_before = layer.extruder_plans[extruder_plan_before_idx];
-            assert (extruder_plan_before.extruder != extruder);
-            
-            double time_here = extruder_plan_before.estimates.getTotalTime();
-            if (time_here > time_before_extruder_plan_to_insert)
-            {
-                insertPreheatCommand(extruder_plan_before, time_here - time_before_extruder_plan_to_insert, extruder, required_temp);
-                return;
-            }
-            time_before_extruder_plan_to_insert -= time_here;
-            
-        }
-        first_it = false;
-    }
-    
-    // time_before_extruder_plan_to_insert falls before all plans in the buffer
-    ExtruderPlan& first_extruder_plan = layers[0]->extruder_plans[0];
-    first_extruder_plan.insertCommand(0, extruder, required_temp, false); // insert preheat command at verfy beginning of buffer
-}
-
-void LayerPlanBuffer::insertPreheatCommand(std::vector<GCodePlanner*>& layers, unsigned int layer_plan_idx, unsigned int extruder_plan_idx)
-{   
-    ExtruderPlan& extruder_plan = layers[layer_plan_idx]->extruder_plans[extruder_plan_idx];
-    int extruder = extruder_plan.extruder;
-    double required_temp = extruder_plan.required_temp;
-    
-    
-    ExtruderPlan* prev_extruder_plan = nullptr;
-    if (extruder_plan_idx == 0)
-    {
-        if (layer_plan_idx == 0)
-        { // the very first extruder plan
-            for (int extruder_idx = 0; extruder_idx < getSettingAsCount("machine_extruder_count"); extruder_idx++)
-            { // set temperature of the first nozzle, turn other nozzles down
-                if (extruder_idx == extruder)
-                {
-//                     extruder_plan.insertCommand(0, extruder, required_temp, true);
-                    // the first used extruder should already be set to the required temp in the start gcode
-                }
-                else 
-                {
-                    extruder_plan.insertCommand(0, extruder_idx, preheat_config.getStandbyTemp(extruder_idx), false);
-                }
-            }
-            return;
-        }
-        prev_extruder_plan = &layers[layer_plan_idx - 1]->extruder_plans.back();
-    }
-    else 
-    {
-        prev_extruder_plan = &layers[layer_plan_idx]->extruder_plans[extruder_plan_idx - 1];
-    }
-    assert(prev_extruder_plan != nullptr);
-    
-    int prev_extruder = prev_extruder_plan->extruder;
-    
-    if (prev_extruder != extruder)
-    { // set previous extruder to standby temperature
-        prev_extruder_plan->insertCommand(prev_extruder_plan->paths.size(), prev_extruder, preheat_config.getStandbyTemp(prev_extruder), false);
-    }
-    
-    if (prev_extruder == extruder)
-    {
-        if (preheat_config.usesFlowDependentTemp(extruder))
-        {
-            insertPreheatCommand_singleExtrusion(*prev_extruder_plan, extruder, required_temp);
-        }
-    }
-    else 
-    {
-        insertPreheatCommand_multiExtrusion(layers, layer_plan_idx, extruder_plan_idx);
-    }
-    
-}
-
-void LayerPlanBuffer::insertPreheatCommands()
-{
-    if (buffer.back().extruder_plans.size() == 0 || (buffer.back().extruder_plans.size() == 1 && buffer.back().extruder_plans[0].paths.size() == 0))
-    { // disregard empty layer
-        buffer.pop_back();
-        return;
-    }
-    
-    std::vector<GCodePlanner*> layers;
-    layers.reserve(buffer.size());
-    for (GCodePlanner& layer_plan : buffer)
-    {
-        layers.push_back(&layer_plan);
-    }
-    
-    unsigned int layer_idx = layers.size() - 1;
-
-    // insert commands for all extruder plans on this layer
-    GCodePlanner& layer_plan = *layers[layer_idx];
-    for (unsigned int extruder_plan_idx = 0; extruder_plan_idx < layer_plan.extruder_plans.size(); extruder_plan_idx++)
-    {
-        ExtruderPlan& extruder_plan = layer_plan.extruder_plans[extruder_plan_idx];
-        double time = extruder_plan.estimates.getTotalUnretractedTime();
-        if (time <= 0.0 
-            || extruder_plan.estimates.getMaterial() == 0.0 // extruder plan only consists of moves (when an extruder switch occurs at the beginning of a layer)
-        )
-        {
-            continue;
-        }
-        double avg_flow = extruder_plan.estimates.getMaterial() / time; // TODO: subtract retracted travel time
-        extruder_plan.required_temp = preheat_config.getTemp(extruder_plan.extruder, avg_flow);
-        
-        insertPreheatCommand(layers, layer_idx, extruder_plan_idx);
-    }
-}
-
-
-
-
-
-
-
-} // namespace cura

src/LayerPlanBuffer.h

@@ -1,134 +0,0 @@
-#ifndef LAYER_PLAN_BUFFER_H
-#define LAYER_PLAN_BUFFER_H
-
-#include <list>
-
-#include "settings.h"
-#include "commandSocket.h"
-
-#include "gcodeExport.h"
-#include "gcodePlanner.h"
-#include "MeshGroup.h"
-
-#include "Preheat.h"
-
-namespace cura 
-{
-
-class LayerPlanBuffer : SettingsMessenger
-{
-    CommandSocket* command_socket;
-    
-    GCodeExport& gcode;
-    
-    Preheat preheat_config; //!< the nozzle and material temperature settings for each extruder train.
-    
-    static constexpr unsigned int buffer_size = 5; // should be as low as possible while still allowing enough time in the buffer to heat up from standby temp to printing temp // TODO: hardcoded value
-    // this value should be higher than 1, cause otherwise each layer is viewed as the first layer and no temp commands are inserted.
-    
-public:
-    std::list<GCodePlanner> buffer; //!< The buffer containing several layer plans (GCodePlanner) before writing them to gcode.
-    
-    LayerPlanBuffer(SettingsBaseVirtual* settings, CommandSocket* command_socket, GCodeExport& gcode)
-    : SettingsMessenger(settings)
-    , command_socket(command_socket)
-    , gcode(gcode)
-    { }
-    
-    void setPreheatConfig(MeshGroup& settings)
-    {
-        preheat_config.setConfig(settings);
-    }
-    
-    /*!
-     * Place a new layer plan (GcodePlanner) by constructing it with the given arguments.
-     * Pop back the oldest layer plan is it exceeds the buffer size and write it to gcode.
-     */
-    template<typename... Args>
-    GCodePlanner& emplace_back(Args&&... constructor_args)
-    {
-        if (buffer.size() > 0)
-        {
-            insertPreheatCommands(); // insert preheat commands of the just completed layer plan (not the newly emplaced one)
-        }
-        buffer.emplace_back(constructor_args...);
-        if (buffer.size() > buffer_size)
-        {
-            buffer.front().writeGCode(gcode, getSettingBoolean("cool_lift_head"), buffer.front().getLayerNr() > 0 ? getSettingInMicrons("layer_height") : getSettingInMicrons("layer_height_0"));
-            if (command_socket)
-                command_socket->sendGCodeLayer();
-            buffer.pop_front();
-        }
-        return buffer.back();
-    }
-    
-    /*!
-     * Write all remaining layer plans (GCodePlanner) to gcode and empty the buffer.
-     */
-    void flush();
-    
-    /*!
-     * Insert the preheat command for @p extruder into @p extruder_plan_before
-     * 
-     * \param extruder_plan_before An extruder plan before the extruder plan for which the temperature is computed, in which to insert the preheat command
-     * \param time_after_extruder_plan_start The time after the start of the extruder plan, before which to insert the preheat command
-     * \param extruder The extruder for which to set the temperature
-     * \param temp The temperature of the preheat command
-     */
-    void insertPreheatCommand(ExtruderPlan& extruder_plan_before, double time_after_extruder_plan_start, int extruder, double temp);
-    
-    /*!
-     * Compute the time needed to preheat, based either on the time the extruder has been on standby 
-     * or based on the temp of the previous extruder plan which has the same extruder nr.
-     * 
-     * \param layers The layers in the buffer, moved to a vector
-     * \param layer_plan_idx The index into @p layers in which to find the extruder plan
-     * \param extruder_plan_idx The index of the extruder plan in the layer corresponding to @p layer_plan_idx for which to find the preheat time needed
-     * \return the time needed to preheat
-     */
-    double timeBeforeExtruderPlanToInsert(std::vector<GCodePlanner*>& layers, unsigned int layer_plan_idx, unsigned int extruder_plan_idx);
-    
-    /*!
-     * For two consecutive extruder plans of the same extruder (so on different layers), 
-     * preheat the extruder to the temperature corresponding to the average flow of the second extruder plan.
-     * 
-     * The preheat commands are inserted such that the middle of the temperature change coincides with the start of the next layer.
-     * 
-     * \param prev_extruder_plan The former extruder plan (of the former layer)
-     * \param extruder The extruder for which too set the temperature
-     * \param required_temp The required temperature for the second extruder plan
-     */
-    void insertPreheatCommand_singleExtrusion(ExtruderPlan& prev_extruder_plan, int extruder, double required_temp);
-    
-    /*!
-     * Insert the preheat command for an extruder plan which is preceded by an extruder plan with a different extruder.
-     * Find the time window in which this extruder hasn't been used
-     * and compute at what time the preheat command needs to be inserted.
-     * Then insert the preheat command in the right extruder plan.
-     * 
-     * \param layers The layers in the buffer, moved to a vector
-     * \param layer_plan_idx The index into @p layers in which to find the extruder plan
-     * \param extruder_plan_idx The index of the extruder plan in the layer corresponding to @p layer_plan_idx for which to find the preheat time needed
-     */
-    void insertPreheatCommand_multiExtrusion(std::vector<GCodePlanner*>& layers, unsigned int layer_plan_idx, unsigned int extruder_plan_idx);
-    
-    /*!
-     * Insert the preheat command for the extruder plan corersponding to @p extruder_plan_idx of the layer corresponding to @p layer_plan_idx.
-     * 
-     * \param layers The layers of the buffer, moved to a temporary vector (from lower to upper layers)
-     * \param layer_plan_idx The index of the layer plan for which to generate a preheat command
-     * \param extruder_plan_idx The index of the extruder plan in the layer corresponding to @p layer_plan_idx for which to generate the preheat command
-     */
-    void insertPreheatCommand(std::vector<GCodePlanner*>& layers, unsigned int layer_plan_idx, unsigned int extruder_plan_idx);
-
-    /*!
-     * Insert the preheat commands for the last added layer (unless that layer was empty)
-     */
-    void insertPreheatCommands();
-};
-
-
-
-} // namespace cura
-
-#endif // LAYER_PLAN_BUFFER_H

src/MergeInfillLines.cpp

@@ -1,155 +0,0 @@
-#include "MergeInfillLines.h"
-
-#include <algorithm> // min
-
-namespace cura
-{
-    
-void MergeInfillLines::writeCompensatedMove(Point& to, double speed, GCodePath& last_path, int64_t new_line_width)
-{
-    double old_line_width = INT2MM(last_path.config->getLineWidth());
-    double new_line_width_mm = INT2MM(new_line_width);
-    double speed_mod = old_line_width / new_line_width_mm;
-    double extrusion_mod = new_line_width_mm / old_line_width;
-    double new_speed = std::min(speed * speed_mod, 150.0); // TODO: hardcoded value: max extrusion speed is 150 mm/s = 9000 mm/min
-    gcode.writeMove(to, new_speed, last_path.getExtrusionMM3perMM() * extrusion_mod);
-}
-    
-bool MergeInfillLines::mergeInfillLines(double speed, unsigned int& path_idx)
-{ //Check for lots of small moves and combine them into one large line
-    Point prev_middle;
-    Point last_middle;
-    int64_t line_width;
-
-    if (isConvertible(path_idx, prev_middle, last_middle, line_width, false))
-    {
-        //   path_idx + 3 is the index of the second extrusion move to be converted in combination with the first
-        {
-            GCodePath& move_path = paths[path_idx];
-            for(unsigned int point_idx = 0; point_idx < move_path.points.size() - 1; point_idx++)
-            {
-                gcode.writeMove(move_path.points[point_idx], speed, move_path.getExtrusionMM3perMM());
-            }
-            gcode.writeMove(prev_middle, travelConfig.getSpeed(), 0);
-            GCodePath& last_path = paths[path_idx + 3];
-            
-            writeCompensatedMove(last_middle, speed, last_path, line_width);
-        }
-        
-        path_idx += 2;
-        extruder_plan.handleInserts(path_idx, gcode);
-        for (; isConvertible(path_idx, prev_middle, last_middle, line_width, true); path_idx += 2)
-        {
-            extruder_plan.handleInserts(path_idx, gcode);
-            GCodePath& last_path = paths[path_idx + 3];
-            writeCompensatedMove(last_middle, speed, last_path, line_width);
-        }
-        path_idx = path_idx + 1; // means that the next path considered is the travel path after the converted extrusion path corresponding to the updated path_idx
-        extruder_plan.handleInserts(path_idx, gcode);
-        return true;
-    }
-    return false;
-};
-
-bool MergeInfillLines::isConvertible(unsigned int path_idx_first_move, Point& first_middle, Point& second_middle, int64_t& line_width, bool use_second_middle_as_first)
-{
-    int64_t max_line_width = nozzle_size * 3 / 2;
-    
-    
-    unsigned int idx = path_idx_first_move;
-    if (idx + 3 > paths.size()-1) return false;
-    if (paths[idx+0].config != &travelConfig) return false;
-    if (paths[idx+1].points.size() > 1) return false;
-    if (paths[idx+1].config == &travelConfig) return false;
-//                 if (paths[idx+2].points.size() > 1) return false;
-    if (paths[idx+2].config != &travelConfig) return false;
-    if (paths[idx+3].points.size() > 1) return false;
-    if (paths[idx+3].config == &travelConfig) return false;
-    
-    Point& a = paths[idx+0].points.back(); // first extruded line from
-    Point& b = paths[idx+1].points.back(); // first extruded line to
-    Point& c = paths[idx+2].points.back(); // second extruded line from
-    Point& d = paths[idx+3].points.back(); // second extruded line to
-    Point ab = b - a;
-    Point cd = d - c;
-    
-    int64_t prod = dot(ab,cd);
-    if (std::abs(prod) + 400 < vSize(ab) * vSize(cd)) // 400 = 20*20, where 20 micron is the allowed inaccuracy in the dot product, introduced by the inaccurate point locations of a,b,c,d
-        return false; // extrusion moves not in the same or opposite diraction
-    if (prod < 0) { ab = ab * -1; }
-    
-    
-    Point infill_vector = (cd + ab) / 2;
-    
-    if (!shorterThen(infill_vector, 5 * nozzle_size)) return false; // infill lines too far apart
-                    
-    first_middle = (use_second_middle_as_first)?
-                    second_middle :
-                    (a + b) / 2;
-    second_middle = (c + d) / 2;
-    
-    Point dir_vector_perp = crossZ(second_middle - first_middle);
-    int64_t dir_vector_perp_length = vSize(dir_vector_perp); // == dir_vector_length
-    if (dir_vector_perp_length == 0) return false;
-    if (dir_vector_perp_length > 5 * nozzle_size) return false; // infill lines too far apart
-    
-    
-    line_width = std::abs( dot(dir_vector_perp, infill_vector) / dir_vector_perp_length );
-    if (line_width > max_line_width) return false; // combined lines would be too wide
-    if (line_width == 0) return false; // dot is zero, so lines are in each others extension, not next to eachother
-    
-    { // check whether the two lines are adjacent
-        Point ca = first_middle - c;
-        double ca_size = vSizeMM(ca);
-        double cd_size = vSizeMM(cd);
-        double prod = INT2MM(dot(ca, cd));
-        double fraction = prod / ( ca_size * cd_size );
-        int64_t line2line_dist = MM2INT(cd_size * std::sqrt(1.0 - fraction * fraction));
-        
-        if (line2line_dist + 20 > paths[idx+1].config->getLineWidth()) return false; // there is a gap between the two lines
-    }
-    
-    return true;
-};
-
-     /*   
-void MergeInfillLines::merge(Point& from, Point& p0, Point& p1)
-{ //Check for lots of small moves and combine them into one large line
-    if (path->points.size() == 1 && path->config != &travelConfig); // && shorterThen(from - path->points[0], path->config->getLineWidth() * 2))
-    {
-        Point p0 = path->points[0];
-        unsigned int path_idx_last = path_idx + 1; // index of the last short move 
-        while(path_idx_last < paths.size() && paths[path_idx_last].points.size() == 1 && shorterThen(p0 - paths[path_idx_last].points[0], path->config->getLineWidth() * 2))
-        {
-            p0 = paths[path_idx_last].points[0];
-            path_idx_last ++;
-        }
-        if (paths[path_idx_last-1].config == &travelConfig)
-            path_idx_last --;
-        
-        if (path_idx_last > path_idx + 2)
-        {
-            p0 = from;
-            for(unsigned int path_idx_short = path_idx; path_idx_short < path_idx_last-1; path_idx_short+=2)
-            {
-                int64_t oldLen = vSize(p0 - paths[path_idx_short].points[0]);
-                Point newPoint = (paths[path_idx_short].points[0] + paths[path_idx_short+1].points[0]) / 2;
-                int64_t newLen = vSize(from - newPoint);
-                if (newLen > 0)
-                {
-                    if (oldLen > 0)
-                        gcode.writeMove(newPoint, speed * oldLen / newLen, path->getExtrusionMM3perMM() * newLen / oldLen);
-                    else 
-                        gcode.writeMove(newPoint, speed, path->getExtrusionMM3perMM());
-                }
-            }
-            gcode.writeMove(paths[path_idx_last-1].points[0], speed, path->getExtrusionMM3perMM());
-            path_idx = path_idx_last - 1;
-            continue;
-        }
-    }
-}*/
-     
-     
-     
-}//namespace cura

src/MergeInfillLines.h

@@ -1,66 +0,0 @@
-#ifndef MERGE_INFILL_LINES_H
-#define MERGE_INFILL_LINES_H
-
-#include "utils/intpoint.h"
-#include "gcodeExport.h"
-#include "gcodePlanner.h"
-
-namespace cura
-{
-    
-class MergeInfillLines 
-{
-//     void merge(Point& from, Point& p0, Point& p1);
-    GCodeExport& gcode; //!<  Where to write the combined line to
-    std::vector<GCodePath>& paths; //!< The paths currently under consideration
-    ExtruderPlan& extruder_plan; //!< The extruder plan of the paths currently under consideration
-    
-    GCodePathConfig& travelConfig; //!< The travel settings used to see whether a path is a travel path or an extrusion path
-    int64_t nozzle_size; //!< The diameter of the hole in the nozzle
-    
-    
-    /*!
-     * Whether the next two extrusion paths are convertible to a single line segment, starting from the end point the of the last travel move at \p path_idx_first_move
-     * \param path_idx_first_move Index into MergeInfillLines::paths to the travel before the two extrusion moves udner consideration
-     * \param first_middle Output parameter: the middle of the first extrusion move
-     * \param second_middle Input/Output parameter: outputs the middle of the second extrusion move; inputs \p first_middle so we don't have to compute it
-     * \param line_width Output parameter: The width of the resulting combined line (the average length of the lines combined)
-     * \param use_second_middle_as_first Whether to use \p second_middle as input parameter for \p first_middle
-     * \return Whether the next two extrusion paths are convertible to a single line segment, starting from the end point the of the last travel move at \p path_idx_first_move
-     */
-    bool isConvertible(unsigned int path_idx_first_move, Point& first_middle, Point& second_middle, int64_t& line_width, bool use_second_middle_as_first);
-    
-    /*!
-     * Write an extrusion move with compensated width and compensated speed so that the material flow will be the same.
-     * 
-     * \param to The point to move to
-     * \param speed The original speed
-     * \param old_path The original path
-     * \param new_line_width The width of the convewrted line (approximately the length of the original line)
-     */
-    void writeCompensatedMove(Point& to, double speed, GCodePath& old_path, int64_t new_line_width);
-public:
-    /*!
-     * Simple constructor only used by MergeInfillLines::isConvertible to easily convey the environment
-     */
-    MergeInfillLines(GCodeExport& gcode, std::vector<GCodePath>& paths, ExtruderPlan& extruder_plan, GCodePathConfig& travelConfig, int64_t nozzle_size) 
-    : gcode(gcode), paths(paths), extruder_plan(extruder_plan), travelConfig(travelConfig), nozzle_size(nozzle_size) { }
-    
-    /*!
-     * Check for lots of small moves and combine them into one large line.
-     * Updates \p path_idx to the next path which is not combined.
-     * 
-     * \param gcode Where to write the combined line to
-     * \param paths The paths currently under consideration
-     * \param travelConfig The travel settings used to see whether a path is a travel path or an extrusion path
-     * \param nozzle_size The diameter of the hole in the nozzle
-     * \param speed A factor used to scale the movement speed
-     * \param path_idx Input/Output parameter: The current index in \p paths where to start combining and the current index after combining as output parameter.
-     * \return Whether lines have been merged and normal path-to-gcode generation can be skipped for the current resulting \p path_idx .
-     */
-    bool mergeInfillLines(double speed, unsigned int& path_idx);
-    
-};
-
-}//namespace cura
-#endif // MERGE_INFILL_LINES_H

src/MeshGroup.h

@@ -1,147 +0,0 @@
-/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
-#ifndef MESH_GROUP_H
-#define MESH_GROUP_H
-
-#include "utils/NoCopy.h"
-#include "mesh.h"
-#include "ExtruderTrain.h"
-
-namespace cura
-{
-    
-/*!
- * A MeshGroup is a collection with 1 or more 3D meshes.
- * 
- * One MeshGroup is a whole which is printed at once.
- * Generally there is one single MeshGroup, though when using one-at-a-time printing, multiple MeshGroups are processed consecutively.
- */
-class MeshGroup : public SettingsBase, NoCopy
-{
-    ExtruderTrain* extruders[MAX_EXTRUDERS] = {nullptr};
-    int extruder_count;
-public:
-    int getExtruderCount()
-    {
-        if (extruder_count == -1)
-        {
-            extruder_count = getSettingAsCount("machine_extruder_count");
-        }
-        return extruder_count;
-    }
-
-    MeshGroup(SettingsBaseVirtual* settings_base)
-    : SettingsBase(settings_base)
-    , extruder_count(-1)
-    {}
-    
-    ~MeshGroup() 
-    {
-        for (unsigned int extruder = 0; extruder < MAX_EXTRUDERS; extruder++)
-        {
-            if (extruders[extruder])
-            {
-                delete extruders[extruder];
-            }
-        }
-    }
-    
-    /*!
-     * Create a new extruder train for the @p extruder_nr, or return the one which already exists.
-     */
-    ExtruderTrain* createExtruderTrain(unsigned int extruder_nr)
-    {
-        if (!extruders[extruder_nr])
-        {
-            extruders[extruder_nr] = new ExtruderTrain(this, extruder_nr);
-        }
-        return extruders[extruder_nr];
-    }
-    
-    ExtruderTrain* getExtruderTrain(unsigned int extruder_nr)
-    {
-        assert(extruders[extruder_nr]);
-        return extruders[extruder_nr];
-    }
-    
-    std::vector<Mesh> meshes;
-
-    Point3 min() //! minimal corner of bounding box
-    {
-        if (meshes.size() < 1)
-        {
-            return Point3(0, 0, 0);
-        }
-        Point3 ret = meshes[0].min();
-        for(unsigned int i=1; i<meshes.size(); i++)
-        {
-            Point3 v = meshes[i].min();
-            ret.x = std::min(ret.x, v.x);
-            ret.y = std::min(ret.y, v.y);
-            ret.z = std::min(ret.z, v.z);
-        }
-        return ret;
-    }
-    Point3 max() //! maximal corner of bounding box
-    {
-        if (meshes.size() < 1)
-        {
-            return Point3(0, 0, 0);
-        }
-        Point3 ret = meshes[0].max();
-        for(unsigned int i=1; i<meshes.size(); i++)
-        {
-            Point3 v = meshes[i].max();
-            ret.x = std::max(ret.x, v.x);
-            ret.y = std::max(ret.y, v.y);
-            ret.z = std::max(ret.z, v.z);
-        }
-        return ret;
-    }
-
-    void clear()
-    {
-        for(Mesh& m : meshes)
-        {
-            m.clear();
-        }
-    }
-
-    void finalize()
-    {
-        //If the machine settings have been supplied, offset the given position vertices to the center of vertices (0,0,0) is at the bed center.
-        Point3 meshgroup_offset(0, 0, 0);
-        if (!getSettingBoolean("machine_center_is_zero"))
-        {
-            meshgroup_offset.x = getSettingInMicrons("machine_width") / 2;
-            meshgroup_offset.y = getSettingInMicrons("machine_depth") / 2;
-        }
-        
-        // If a mesh position was given, put the mesh at this position in 3D space. 
-        for(Mesh& mesh : meshes)
-        {
-            Point3 mesh_offset(mesh.getSettingInMicrons("mesh_position_x"), mesh.getSettingInMicrons("mesh_position_y"), mesh.getSettingInMicrons("mesh_position_z"));
-            if (mesh.getSettingBoolean("center_object"))
-            {
-                Point3 object_min = mesh.min();
-                Point3 object_max = mesh.max();
-                Point3 object_size = object_max - object_min;
-                mesh_offset += Point3(-object_min.x - object_size.x / 2, -object_min.y - object_size.y / 2, -object_min.z);
-            }
-            mesh.offset(mesh_offset + meshgroup_offset);
-        }
-    }
-};
-
-/*!
- * Load a Mesh from file and store it in the \p meshgroup.
- * 
- * \param meshgroup The meshgroup where to store the mesh
- * \param filename The filename of the mesh file
- * \param transformation The transformation applied to all vertices
- * \param object_parent_settings (optional) The parent settings object of the new mesh. Defaults to \p meshgroup if none is given.
- * \return whether the file could be loaded
- */
-bool loadMeshIntoMeshGroup(MeshGroup* meshgroup, const char* filename, FMatrix3x3& transformation, SettingsBaseVirtual* object_parent_settings = nullptr);
-
-}//namespace cura
-#endif//MESH_GROUP_H

src/Preheat.h

@@ -1,178 +0,0 @@
-#ifndef PREHEAT_H
-#define PREHEAT_H
-
-#include <cassert>
-#include <algorithm> // max
-
-#include "utils/logoutput.h"
-#include "MeshGroup.h"
-
-#include "FlowTempGraph.h"
-
-
-namespace cura 
-{
-
-
-
-/*!
- * Class for computing heatup and cooldown times used for computing the time the printer needs to heat up to a printing temperature.
- */
-class Preheat 
-{
-    /*!
-     * The nozzle and material temperature settings for an extruder train.
-     */
-    class Config
-    {
-    public:
-        double time_to_heatup_1_degree; //!< average time it takes to heat up one degree (in the range of normal print temperatures and standby temperature)
-        double time_to_cooldown_1_degree; //!< average time it takes to cool down one degree (in the range of normal print temperatures and standby temperature)
-        
-        double heatup_cooldown_time_mod_while_printing; //!< The time to be added to Preheat::time_to_heatup_1_degree and subtracted from Preheat::time_to_cooldown_1_degree to get the timings while printing
-
-        double standby_temp; //!< The temperature at which the nozzle rests when it is not printing.
-
-        double material_print_temperature; //!< default print temp (backward compatilibily)
-        
-        bool flow_dependent_temperature; //!< Whether to make the temperature dependent on flow
-    
-        FlowTempGraph flow_temp_graph; //!< The graph linking flows to corresponding temperatures
-    };
-
-    std::vector<Config> config_per_extruder;//!< the nozzle and material temperature settings for each extruder train.
-public:
-    /*!
-     * Get the standby temperature of an extruder train
-     * \param extruder the extruder train for which to get the standby tmep
-     * \return the standby temp
-     */
-    double getStandbyTemp(int extruder)
-    {
-        return config_per_extruder[extruder].standby_temp;
-    }
-    
-    /*!
-     * Set the nozzle and material temperature settings for each extruder train.
-     */
-    void setConfig(MeshGroup& settings)
-    {
-        for (int extruder_nr = 0; extruder_nr < settings.getExtruderCount(); extruder_nr++)
-        {
-            assert(settings.getExtruderTrain(extruder_nr) != nullptr);
-            ExtruderTrain& extruder_train = *settings.getExtruderTrain(extruder_nr);
-            config_per_extruder.emplace_back();
-            Config& config = config_per_extruder.back();
-            config.time_to_cooldown_1_degree = 1.0 / extruder_train.getSettingInSeconds("machine_nozzle_cool_down_speed"); // 0.5
-            config.time_to_heatup_1_degree = 1.0 / extruder_train.getSettingInSeconds("machine_nozzle_heat_up_speed"); // 0.5
-            config.heatup_cooldown_time_mod_while_printing = 1.0 / extruder_train.getSettingInSeconds("material_extrusion_cool_down_speed"); // 0.1
-            config.standby_temp = extruder_train.getSettingInSeconds("material_standby_temperature"); // 150
-            
-            config.material_print_temperature = extruder_train.getSettingInDegreeCelsius("material_print_temperature"); // 220
-            
-            config.flow_dependent_temperature = extruder_train.getSettingBoolean("material_flow_dependent_temperature"); 
-            
-            config.flow_temp_graph = extruder_train.getSettingAsFlowTempGraph("material_flow_temp_graph"); // [[0.1,180],[20,230]]
-        }
-    }
-    
-    bool usesFlowDependentTemp(int extruder_nr)
-    {
-        return config_per_extruder[extruder_nr].flow_dependent_temperature;
-    }
-private:
-    /*!
-     * Calculate time to heat up from standby temperature to a given temperature.
-     * Assumes @p temp is higher than the standby temperature.
-     * 
-     * \param extruder The extruder for which to get the time
-     * \param temp The temperature to be reached
-     */
-    double timeToHeatFromStandbyToPrintTemp(unsigned int extruder, double temp)
-    {
-        return (temp - config_per_extruder[extruder].standby_temp) * config_per_extruder[extruder].time_to_heatup_1_degree; 
-    }
-
-public:
-    
-    /*!
-     * Get the optimal temperature corresponding to a given average flow.
-     * \param extruder The extruder train
-     * \param flow The flow for which to get the optimal temperature
-     * \return The corresponding optimal temperature
-     */
-    double getTemp(unsigned int extruder, double flow)
-    {
-        return config_per_extruder[extruder].flow_temp_graph.getTemp(flow, config_per_extruder[extruder].material_print_temperature, config_per_extruder[extruder].flow_dependent_temperature);
-    }
-    
-    /*!
-     * Decide when to start warming up again after starting to cool down towards the standby temperature.
-     * Two cases are considered: 
-     * the case where the standby temperature is reached  \__/    .
-     * and the case where it isn't  \/    .
-     * 
-     * IT is assumed that the printer is not printing during this cool down and warm up time.
-     * 
-     * Assumes from_temp is approximately the same as @p temp
-     * 
-     * \param window_time The time window within which the cooldown and heat up must take place.
-     * \param extruder The extruder used
-     * \param temp The temperature to which to heat
-     * \return The time before the end of the @p time_window to insert the preheat command
-     */
-    double timeBeforeEndToInsertPreheatCommand_coolDownWarmUp(double time_window, unsigned int extruder, double temp)
-    {
-        double time_ratio_cooldown_heatup = config_per_extruder[extruder].time_to_cooldown_1_degree / config_per_extruder[extruder].time_to_heatup_1_degree;
-        double time_to_heat_from_standby_to_print_temp = timeToHeatFromStandbyToPrintTemp(extruder, temp);
-        double time_needed_to_reach_standby_temp = time_to_heat_from_standby_to_print_temp * (1.0 + time_ratio_cooldown_heatup);
-        if (time_needed_to_reach_standby_temp < time_window)
-        {
-            return time_to_heat_from_standby_to_print_temp;
-        }
-        else 
-        {
-            return time_window * config_per_extruder[extruder].time_to_heatup_1_degree / (config_per_extruder[extruder].time_to_cooldown_1_degree + config_per_extruder[extruder].time_to_heatup_1_degree);
-        }
-    }
-    /*!
-     * Calculate time needed to warm up the nozzle from a given temp to a given temp.
-     * If the printer is printing in the mean time the warming up will take longer.
-     * 
-     * 
-     * \param from_temp The temperature at which the nozzle was before
-     * \param extruder The extruder used
-     * \param temp The temperature to which to heat
-     * \param printing Whether the printer is printing in the time to heat up the nozzle
-     * \return The time needed to reach the desired temperature (@p temp)
-     */
-    double timeBeforeEndToInsertPreheatCommand_warmUp(double from_temp, unsigned int extruder, double temp, bool printing)
-    {
-        if (temp > from_temp)
-        {
-            if (printing)
-            {
-                return (temp - from_temp) * (config_per_extruder[extruder].time_to_heatup_1_degree + config_per_extruder[extruder].heatup_cooldown_time_mod_while_printing); 
-            }
-            else 
-            {
-                return (temp - from_temp) * config_per_extruder[extruder].time_to_heatup_1_degree; 
-            }
-        }
-        else 
-        {
-            if (printing)
-            {
-                return (from_temp - temp) * config_per_extruder[extruder].time_to_cooldown_1_degree; 
-            }
-            else 
-            {
-                return (from_temp - temp) * std::max(0.0, config_per_extruder[extruder].time_to_cooldown_1_degree - config_per_extruder[extruder].heatup_cooldown_time_mod_while_printing); 
-            }
-        }
-    }
-};
-
-} // namespace cura 
-
-#endif // PREHEAT_H

src/PrimeTower.cpp

@@ -1,299 +0,0 @@
-#include "PrimeTower.h"
-
-#include "ExtruderTrain.h"
-#include "sliceDataStorage.h"
-#include "gcodeExport.h"
-#include "gcodePlanner.h"
-#include "infill.h"
-
-namespace cura 
-{
-    
-    
-PrimeTower::PrimeTower()
-{
-}
-
-
-
-void PrimeTower::initConfigs(MeshGroup* meshgroup, std::vector<RetractionConfig>& retraction_config_per_extruder)
-{
-    extruder_count = meshgroup->getSettingAsCount("machine_extruder_count");
-    
-    for (int extr = 0; extr < extruder_count; extr++)
-    {
-        config_per_extruder.emplace_back(&retraction_config_per_extruder[extr], "SUPPORT");// so that visualization in the old Cura still works (TODO)
-    }
-    for (int extr = 0; extr < extruder_count; extr++)
-    {
-        ExtruderTrain* train = meshgroup->getExtruderTrain(extr);
-        config_per_extruder[extr].init(train->getSettingInMillimetersPerSecond("speed_prime_tower"), train->getSettingInMicrons("prime_tower_line_width"), train->getSettingInPercentage("prime_tower_flow"));
-    }
-}
-
-void PrimeTower::setConfigs(MeshGroup* meshgroup, int layer_thickness)
-{
-    
-    extruder_count = meshgroup->getSettingAsCount("machine_extruder_count");
-    
-    for (int extr = 0; extr < extruder_count; extr++)
-    {
-        GCodePathConfig& conf = config_per_extruder[extr];
-        conf.setLayerHeight(layer_thickness);
-    }
-}
-
-    
-
-void PrimeTower::computePrimeTowerMax(SliceDataStorage& storage)
-{ // compute storage.max_object_height_second_to_last_extruder, which is used to determine the highest point in the prime tower
-        
-    extruder_count = storage.getSettingAsCount("machine_extruder_count");
-    
-    int max_object_height_per_extruder[extruder_count]; 
-    std::fill_n(max_object_height_per_extruder, extruder_count, -1); // unitialize all as -1
-    { // compute max_object_height_per_extruder
-        for (SliceMeshStorage& mesh : storage.meshes)
-        {
-            max_object_height_per_extruder[mesh.getSettingAsIndex("extruder_nr")] = 
-                std::max(   max_object_height_per_extruder[mesh.getSettingAsIndex("extruder_nr")]
-                        ,   mesh.layer_nr_max_filled_layer  ); 
-        }
-        int support_infill_extruder_nr = storage.getSettingAsIndex("support_infill_extruder_nr"); // TODO: support extruder should be configurable per object
-        max_object_height_per_extruder[support_infill_extruder_nr] = 
-        std::max(   max_object_height_per_extruder[support_infill_extruder_nr]
-                ,   storage.support.layer_nr_max_filled_layer  ); 
-        int support_roof_extruder_nr = storage.getSettingAsIndex("support_roof_extruder_nr"); // TODO: support roof extruder should be configurable per object
-        max_object_height_per_extruder[support_roof_extruder_nr] = 
-        std::max(   max_object_height_per_extruder[support_roof_extruder_nr]
-                ,   storage.support.layer_nr_max_filled_layer  ); 
-    }
-    { // // compute max_object_height_second_to_last_extruder
-        int extruder_max_object_height = 0;
-        for (int extruder_nr = 1; extruder_nr < extruder_count; extruder_nr++)
-        {
-            if (max_object_height_per_extruder[extruder_nr] > max_object_height_per_extruder[extruder_max_object_height])
-            {
-                extruder_max_object_height = extruder_nr;
-            }
-        }
-        int extruder_second_max_object_height = -1;
-        for (int extruder_nr = 0; extruder_nr < extruder_count; extruder_nr++)
-        {
-            if (extruder_nr == extruder_max_object_height) { continue; }
-            if (extruder_second_max_object_height == -1 || max_object_height_per_extruder[extruder_nr] > max_object_height_per_extruder[extruder_second_max_object_height])
-            {
-                extruder_second_max_object_height = extruder_nr;
-            }
-        }
-        if (extruder_second_max_object_height < 0)
-        {
-            storage.max_object_height_second_to_last_extruder = -1;
-        }
-        else 
-        {
-            storage.max_object_height_second_to_last_extruder = max_object_height_per_extruder[extruder_second_max_object_height];
-        }
-    }
-       
-}
-
-void PrimeTower::generateGroundpoly(SliceDataStorage& storage) 
-{
-    PolygonRef p = storage.primeTower.ground_poly.newPoly();
-    int tower_size = storage.getSettingInMicrons("prime_tower_size");
-    int tower_distance = 0; //storage.getSettingInMicrons("prime_tower_distance");
-    int x = storage.getSettingInMicrons("prime_tower_position_x"); // storage.model_max.x
-    int y = storage.getSettingInMicrons("prime_tower_position_y"); // storage.model_max.y
-    p.add(Point(x + tower_distance, y + tower_distance));
-    p.add(Point(x + tower_distance, y + tower_distance + tower_size));
-    p.add(Point(x + tower_distance - tower_size, y + tower_distance + tower_size));
-    p.add(Point(x + tower_distance - tower_size, y + tower_distance));
-
-    storage.wipePoint = Point(x + tower_distance - tower_size / 2, y + tower_distance + tower_size / 2);   
-}
-
-void PrimeTower::generatePaths(SliceDataStorage& storage, unsigned int total_layers)
-{
-    if (storage.max_object_height_second_to_last_extruder >= 0 
-//         && storage.getSettingInMicrons("prime_tower_distance") > 0 
-        && storage.getSettingInMicrons("prime_tower_size") > 0)
-    {
-        generatePaths3(storage);
-    }
-}
-void PrimeTower::generatePaths_OLD(SliceDataStorage& storage, unsigned int total_layers)
-{
-    
-    if (storage.max_object_height_second_to_last_extruder >= 0 && storage.getSettingInMicrons("prime_tower_distance") > 0 && storage.getSettingInMicrons("prime_tower_size") > 0)
-    {
-        PolygonRef p = storage.primeTower.ground_poly.newPoly();
-        int tower_size = storage.getSettingInMicrons("prime_tower_size");
-        int tower_distance = 0; //storage.getSettingInMicrons("prime_tower_distance");
-        int x = storage.getSettingInMicrons("prime_tower_position_x"); // storage.model_max.x
-        int y = storage.getSettingInMicrons("prime_tower_position_y"); // storage.model_max.y
-        p.add(Point(x + tower_distance, y + tower_distance));
-        p.add(Point(x + tower_distance, y + tower_distance + tower_size));
-        p.add(Point(x + tower_distance - tower_size, y + tower_distance + tower_size));
-        p.add(Point(x + tower_distance - tower_size, y + tower_distance));
-
-        storage.wipePoint = Point(x + tower_distance - tower_size / 2, y + tower_distance + tower_size / 2);
-    }
-}
-    
-    
-void PrimeTower::generatePaths2(SliceDataStorage& storage) // half baked attempt at spiral shaped prime tower pattern
-{
-//     extruder_count = storage.getSettingAsCount("machine_extruder_count");
-//     
-//     int64_t line_dists[extruder_count + 1]; // distance between the lines of different extruders, and half the line dist for beginning and ending
-//     int64_t total_width = 0;
-//     {
-//         int64_t last_line_width = 0;
-//         for (int extr = 0; extr < extruder_count; extr++)
-//         {
-//             int64_t line_width = config_per_extruder[extr].getLineWidth();
-//             line_dists[extr] = (line_width + last_line_width) / 2;
-//             total_width += line_width;
-//             last_line_width = line_width;
-//         }
-//         line_dists[extruder_count] = last_line_width / 2;
-//     }
-//     
-    
-    
-}
-
-void PrimeTower::generatePaths3(SliceDataStorage& storage)
-{
-        
-    int n_patterns = 2; // alternating patterns between layers
-    double infill_overlap = 15; // so that it can't be zero
-    
-    generateGroundpoly(storage);
-    
-    for (int extruder = 0; extruder < extruder_count; extruder++)
-    {
-        int line_width = storage.meshgroup->getExtruderTrain(extruder)->getSettingInMicrons("prime_tower_line_width");
-        patterns_per_extruder.emplace_back(n_patterns);
-        std::vector<Polygons>& patterns = patterns_per_extruder.back();
-        for (int pattern_idx = 0; pattern_idx < n_patterns; pattern_idx++)
-        {
-            generateLineInfill(ground_poly, -line_width/2, patterns[pattern_idx], line_width, line_width, infill_overlap, 45 + pattern_idx*90);
-        }
-    }
-}
-
-    
-
-void PrimeTower::addToGcode(SliceDataStorage& storage, GCodePlanner& gcodeLayer, GCodeExport& gcode, int layer_nr, int prev_extruder, bool prime_tower_dir_outward, bool wipe, int* last_prime_tower_poly_printed, CommandSocket* command_socket)
-{
-    if (!( storage.max_object_height_second_to_last_extruder >= 0 
-//         && storage.getSettingInMicrons("prime_tower_distance") > 0 
-        && storage.getSettingInMicrons("prime_tower_size") > 0) )
-    {
-        return;
-    }
-    bool prime_tower_added = false;
-    for (int extruder = 0; extruder <  storage.meshgroup->getExtruderCount() && !prime_tower_added; extruder++)
-    {
-        prime_tower_added = last_prime_tower_poly_printed[extruder] == int(layer_nr);
-    }
-    if (prime_tower_added)
-    { // don't print the prime tower if it has been printed already
-        return;
-    }
-    
-    if (prev_extruder == gcodeLayer.getExtruder())
-    {
-        wipe = false;
-    }
-    addToGcode3(storage, gcodeLayer, gcode, layer_nr, prev_extruder, prime_tower_dir_outward, wipe, last_prime_tower_poly_printed, command_socket);
-}
-
-void PrimeTower::addToGcode3(SliceDataStorage& storage, GCodePlanner& gcodeLayer, GCodeExport& gcode, int layer_nr, int prev_extruder, bool prime_tower_dir_outward, bool wipe, int* last_prime_tower_poly_printed, CommandSocket* command_socket)
-{
-    if (layer_nr > storage.max_object_height_second_to_last_extruder + 1)
-    {
-        return;
-    }
-    
-    int new_extruder = gcodeLayer.getExtruder();
-
-    
-    Polygons& pattern = patterns_per_extruder[new_extruder][layer_nr % 2];
-
-    
-    GCodePathConfig& config = config_per_extruder[new_extruder];
-    int start_idx = 0; // TODO: figure out which idx is closest to the far right corner
-    gcodeLayer.addPolygon(ground_poly.back(), start_idx, &config);
-    gcodeLayer.addLinesByOptimizer(pattern, &config);
-    
-    last_prime_tower_poly_printed[new_extruder] = layer_nr;
-
-    if (command_socket)
-        command_socket->sendPolygons(SupportType, layer_nr, pattern, config.getLineWidth());
-
-    if (wipe)
-    { //Make sure we wipe the old extruder on the prime tower.
-        gcodeLayer.addTravel(storage.wipePoint - gcode.getExtruderOffset(prev_extruder) + gcode.getExtruderOffset(new_extruder));
-    }
-}
-
-void PrimeTower::addToGcode_OLD(SliceDataStorage& storage, GCodePlanner& gcodeLayer, GCodeExport& gcode, int layer_nr, int prev_extruder, bool prime_tower_dir_outward, bool wipe, int* last_prime_tower_poly_printed, CommandSocket* command_socket)
-{
-    if (layer_nr > storage.max_object_height_second_to_last_extruder + 1)
-    {
-        return;
-    }
-    
-    int new_extruder = gcodeLayer.getExtruder();
-
-    int64_t offset = -config_per_extruder[new_extruder].getLineWidth(); 
-    if (layer_nr > 0)
-        offset *= 2;
-    
-    //If we changed extruder, print the wipe/prime tower for this nozzle;
-    std::vector<Polygons> insets;
-    { // generate polygons
-        if ((layer_nr % 2) == 1)
-            insets.push_back(storage.primeTower.ground_poly.offset(offset / 2));
-        else
-            insets.push_back(storage.primeTower.ground_poly);
-        while(true)
-        {
-            Polygons new_inset = insets[insets.size() - 1].offset(offset);
-            if (new_inset.size() < 1)
-                break;
-            insets.push_back(new_inset);
-        }
-    }
-    
-    
-    for(unsigned int n=0; n<insets.size(); n++)
-    {
-        GCodePathConfig& config = config_per_extruder[new_extruder];
-        gcodeLayer.addPolygonsByOptimizer(insets[(prime_tower_dir_outward)? insets.size() - 1 - n : n], &config);
-    }
-    last_prime_tower_poly_printed[new_extruder] = layer_nr;
-    
-    if (wipe)
-    { //Make sure we wipe the old extruder on the prime tower.
-        gcodeLayer.addTravel(storage.wipePoint - gcode.getExtruderOffset(prev_extruder) + gcode.getExtruderOffset(new_extruder));
-    }
-};
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-}//namespace cura

src/PrimeTower.h

@@ -1,68 +0,0 @@
-#ifndef PRIME_TOWER_H
-#define PRIME_TOWER_H
-
-#include "gcodeExport.h" // GCodePathConfig
-#include "MeshGroup.h"
-#include "utils/polygon.h" // Polygons
-
-namespace cura 
-{
-
-    
-class SliceDataStorage;
-class GCodePlanner;
-class GCodeExport;
-
-typedef std::vector<IntPoint> PolyLine;
-
-class PrimeTower
-{
-private:
-    int extruder_count;
-    std::vector<GCodePathConfig> config_per_extruder;
-
-    class WallInfill
-    {
-        
-    };
-public:
-    void initConfigs(MeshGroup* meshgroup, std::vector<RetractionConfig>& retraction_config_per_extruder);
-    void setConfigs(MeshGroup* configs, int layer_thickness);
-    
-    Polygons ground_poly;
-    
-    std::vector<PolyLine> extruder_paths;
-    
-    
-    void generateGroundpoly(SliceDataStorage& storage);
-
-    std::vector<std::vector<Polygons>> patterns_per_extruder; //!< for each extruder a vector of patterns to alternate between, over the layers
-    
-    void generatePaths3(SliceDataStorage& storage);
-    
-    void generatePaths2(SliceDataStorage& storage);
-    /*!
-     * Generate the area where the prime tower should be.
-     * 
-     * \param storage Input and Output parameter: fetches the outline information (see SliceLayerPart::outline) and generates the other reachable field of the \p storage
-     * \param total_layers The total number of layers 
-     */
-    void generatePaths(SliceDataStorage& storage, unsigned int total_layers);
-    void generatePaths_OLD(SliceDataStorage& storage, unsigned int total_layers);
-
-    void computePrimeTowerMax(SliceDataStorage& storage);
-    
-    PrimeTower();
-
-    void addToGcode(SliceDataStorage& storage, GCodePlanner& gcodeLayer, GCodeExport& gcode, int layer_nr, int prev_extruder, bool prime_tower_dir_outward, bool wipe, int* last_prime_tower_poly_printed, CommandSocket* command_socket);
-    void addToGcode_OLD(SliceDataStorage& storage, GCodePlanner& gcodeLayer, GCodeExport& gcode, int layer_nr, int prev_extruder, bool prime_tower_dir_outward, bool wipe, int* last_prime_tower_poly_printed, CommandSocket* command_socket);
-    void addToGcode3(SliceDataStorage& storage, GCodePlanner& gcodeLayer, GCodeExport& gcode, int layer_nr, int prev_extruder, bool prime_tower_dir_outward, bool wipe, int* last_prime_tower_poly_printed, CommandSocket* command_socket);
-
-};
-
-
-
-
-}//namespace cura
-
-#endif // PRIME_TOWER_H

src/PrintFeature.h

@@ -1,27 +0,0 @@
-#ifndef PRINT_FEATURE
-#define PRINT_FEATURE
-
-namespace cura
-{
-
-enum class EPrintFeature : unsigned int // unused!!
-{ // TODO: use in gcodePathConfigs ?
-    OUTER_WALL,
-    INNER_WALLS,
-    INFILL,
-    SKIN,
-    HELPERS,
-    UNCLASSIFIED,
-    ENUM_COUNT
-};
-
-
-
-
-
-
-
-
-} // namespace cura
-
-#endif // PRINT_FEATURE

src/Progress.cpp

@@ -1,101 +0,0 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
-#include "Progress.h"
-
-#include "commandSocket.h"
-#include "utils/gettime.h"
-
-namespace cura {
-    
-double Progress::times [] = 
-{ 
-    0.0, 
-    5.269, 
-    1.533, 
-    22.953,
-    51.009, 
-    48.858, 
-    154.62, 
-    0.1 
-};
-std::string Progress::names [] = 
-{
-    "start",
-    "slice",
-    "layerparts",
-    "inset",
-    "support",
-    "skin",
-    "export",
-    "process"
-};
-
-    
-double Progress::accumulated_times [N_PROGRESS_STAGES] = {-1};
-double Progress::total_timing = -1;
-
-/*
-const Progress::Stage Progress::stages[] = 
-{ 
-    Progress::Stage::START, 
-    Progress::Stage::SLICING, 
-    Progress::Stage::PARTS, 
-    Progress::Stage::INSET, 
-    Progress::Stage::SUPPORT, 
-    Progress::Stage::SKIN, 
-    Progress::Stage::EXPORT, 
-    Progress::Stage::FINISH 
-};
-*/
-
-float Progress::calcOverallProgress(Stage stage, float stage_progress)
-{
-    return ( accumulated_times[(int)stage] + stage_progress * times[(int)stage] ) / total_timing;
-}
-
-
-void Progress::init()
-{
-    double accumulated_time = 0;
-    for (int stage = 0; stage < N_PROGRESS_STAGES; stage++)
-    {
-        accumulated_times[(int)stage] = accumulated_time;
-        accumulated_time += times[(int)stage];
-    }
-    total_timing = accumulated_time;
-}
-
-void Progress::messageProgress(Progress::Stage stage, int progress_in_stage, int progress_in_stage_max, CommandSocket* command_socket)
-{
-    float percentage = calcOverallProgress(stage, float(progress_in_stage) / float(progress_in_stage_max));
-    if (command_socket)
-    {
-        command_socket->sendProgress(percentage);
-    }
-    
-    logProgress(names[(int)stage].c_str(), progress_in_stage, progress_in_stage_max, percentage);
-}
-
-void Progress::messageProgressStage(Progress::Stage stage, TimeKeeper* time_keeper, CommandSocket* command_socket)
-{
-    if (command_socket)
-    {
-        command_socket->sendProgressStage(stage);
-    }
-    
-    if (time_keeper)
-    {
-        if ((int)stage > 0)
-        {
-            log("Progress: %s accomplished in %5.3fs\n", names[(int)stage-1].c_str(), time_keeper->restart());
-        }
-        else
-        {
-            time_keeper->restart();
-        }
-        
-        if ((int)stage < (int)Stage::FINISH)
-            log("Starting %s...\n", names[(int)stage].c_str());
-    }
-}
-
-}// namespace cura

src/Progress.h

@@ -1,75 +0,0 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
-#ifndef PROGRESS_H
-#define PROGRESS_H
-
-#include <string>
-
-#include "utils/logoutput.h"
-#include "utils/gettime.h"
-
-namespace cura {
-
-class CommandSocket;
-
-#define N_PROGRESS_STAGES 8
-
-/*!
- * Class for handling the progress bar and the progress logging.
- * 
- * The progress bar is based on a single slicing of a rather large model which needs some complex support;
- * the relative timing of each stage is currently based on that of the slicing of dragon_65_tilted_large.stl
- */
-class Progress 
-{
-public:
-    /*!
-     * The stage in the whole slicing process 
-     */
-    enum class Stage : unsigned int
-    {
-        START   = 0, 
-        SLICING = 1, 
-        PARTS   = 2, 
-        INSET   = 3, 
-        SUPPORT = 4, 
-        SKIN    = 5, 
-        EXPORT  = 6, 
-        FINISH  = 7
-    };
-private:
-    static double times [N_PROGRESS_STAGES]; //!< Time estimates per stage
-    static std::string names[N_PROGRESS_STAGES]; //!< name of each stage
-    static double accumulated_times [N_PROGRESS_STAGES]; //!< Time past before each stage
-    static double total_timing; //!< An estimate of the total time
-    /*!
-     * Give an estimate between 0 and 1 of how far the process is.
-     * 
-     * \param stage The current stage of processing
-     * \param stage_process How far we currently are in the \p stage
-     * \return An estimate of the overall progress.
-     */
-    static float calcOverallProgress(Stage stage, float stage_progress);
-public:
-    static void init(); //!< Initialize some values needed in a fast computation of the progress
-    /*!
-     * Message progress over the \p commandSocket and to the terminal (if the command line arg '-p' is provided).
-     * 
-     * \param stage The current stage of processing
-     * \param progress_in_stage Any number giving the progress within the stage
-     * \param progress_in_stage_max The maximal value of \p progress_in_stage
-     * \param commandSocket The command socket over which to communicate the progress.
-     */
-    static void messageProgress(Stage stage, int progress_in_stage, int progress_in_stage_max, CommandSocket* commandSocket);
-    /*!
-     * Message the progress stage over the command socket.
-     * 
-     * \param stage The current stage
-     * \param timeKeeper The stapwatch keeping track of the timings for each stage (optional)
-     * \param commandSocket The command socket over which to communicate (optional)
-     */
-    static void messageProgressStage(Stage stage, TimeKeeper* timeKeeper, CommandSocket* commandSocket);
-};
-
-
-} // name space cura
-#endif//PROGRESS_H

src/Weaver.cpp

@@ -4,17 +4,14 @@
 #include <fstream> // debug IO
 #include <unistd.h>
 
-#include "Progress.h"
 #include "weaveDataStorage.h"
 
 namespace cura 
 {
 
-void Weaver::weave(MeshGroup* meshgroup, CommandSocket* commandSocket)
-{   
-    wireFrame.meshgroup = meshgroup;
-    
-    int maxz = meshgroup->max().z;
+void Weaver::weave(PrintObject* object, CommandSocket* commandSocket)
+{
+    int maxz = object->max().z;
 
     int layer_count = (maxz - initial_layer_thickness) / connectionHeight + 1;
 
@@ -22,12 +19,13 @@ void Weaver::weave(MeshGroup* meshgroup, CommandSocket* commandSocket)
 
     std::vector<cura::Slicer*> slicerList;
 
-    for(Mesh& mesh : meshgroup->meshes)
+    for(Mesh& mesh : object->meshes)
     {
         cura::Slicer* slicer = new cura::Slicer(&mesh, initial_layer_thickness, connectionHeight, layer_count, mesh.getSettingBoolean("meshfix_keep_open_polygons"), mesh.getSettingBoolean("meshfix_extensive_stitching"));
         slicerList.push_back(slicer);
     }
 
+    
     int starting_layer_idx;
     { // find first non-empty layer
         for (starting_layer_idx = 0; starting_layer_idx < layer_count; starting_layer_idx++)
@@ -55,25 +53,17 @@ void Weaver::weave(MeshGroup* meshgroup, CommandSocket* commandSocket)
         if (commandSocket)
             commandSocket->sendPolygons(Inset0Type, 0, wireFrame.bottom_outline, 1);
         
-        if (slicerList.empty()) //Wait, there is nothing to slice.
-        {
-            wireFrame.z_bottom = 0;
-        }
-        else
-        {
-            wireFrame.z_bottom = slicerList[0]->layers[starting_layer_idx].z;
-        }
+        wireFrame.z_bottom = slicerList[0]->layers[starting_layer_idx].z;
         
         Point starting_point_in_layer;
         if (wireFrame.bottom_outline.size() > 0)
             starting_point_in_layer = (wireFrame.bottom_outline.max() + wireFrame.bottom_outline.min()) / 2;
         else 
-            starting_point_in_layer = (Point(0,0) + meshgroup->max() + meshgroup->min()) / 2;
+            starting_point_in_layer = (Point(0,0) + object->max() + object->min()) / 2;
         
-        Progress::messageProgressStage(Progress::Stage::INSET, nullptr, commandSocket);
         for (int layer_idx = starting_layer_idx + 1; layer_idx < layer_count; layer_idx++)
         {
-            Progress::messageProgress(Progress::Stage::INSET, layer_idx+1, layer_count, commandSocket); // abuse the progress system of the normal mode of CuraEngine
+            logProgress("inset", layer_idx+1, layer_count); // abuse the progress system of the normal mode of CuraEngine
             
             Polygons parts1;
             for (cura::Slicer* slicer : slicerList)
@@ -107,10 +97,9 @@ void Weaver::weave(MeshGroup* meshgroup, CommandSocket* commandSocket)
     {
         Polygons* lower_top_parts = &wireFrame.bottom_outline;
         
-        Progress::messageProgressStage(Progress::Stage::SKIN, nullptr, commandSocket);
         for (unsigned int layer_idx = 0; layer_idx < wireFrame.layers.size(); layer_idx++)
         {
-            Progress::messageProgress(Progress::Stage::SKIN, layer_idx+1, wireFrame.layers.size(), commandSocket); // abuse the progress system of the normal mode of CuraEngine
+            logProgress("skin", layer_idx+1, wireFrame.layers.size()); // abuse the progress system of the normal mode of CuraEngine
             
             WeaveLayer& layer = wireFrame.layers[layer_idx];
             
@@ -142,21 +131,16 @@ void Weaver::weave(MeshGroup* meshgroup, CommandSocket* commandSocket)
 
 
     { // roofs:
-        if (!wireFrame.layers.empty()) //If there are no layers, create no roof.
-        {
-            WeaveLayer& top_layer = wireFrame.layers.back();
-            Polygons to_be_supported; // empty for the top layer
-            fillRoofs(top_layer.supported, to_be_supported, -1, top_layer.z1, top_layer.roofs);
-        }
+        
+        WeaveLayer& top_layer = wireFrame.layers.back();
+        Polygons to_be_supported; // empty for the top layer
+        fillRoofs(top_layer.supported, to_be_supported, -1, top_layer.z1, top_layer.roofs);
     }
     
     
     { // bottom:
-        if (!wireFrame.layers.empty()) //If there are no layers, create no bottom.
-        {
-            Polygons to_be_supported; // is empty for the bottom layer, cause the order of insets doesn't really matter (in a sense everything is to be supported)
-            fillRoofs(wireFrame.bottom_outline, to_be_supported, -1, wireFrame.layers.front().z0, wireFrame.bottom_infill);
-        }
+        Polygons to_be_supported; // is empty for the bottom layer, cause the order of insets doesn't really matter (in a sense everything is to be supported)
+        fillRoofs(wireFrame.bottom_outline, to_be_supported, -1, wireFrame.layers.front().z0, wireFrame.bottom_infill);
     }
     
 }
@@ -167,7 +151,7 @@ void Weaver::createHorizontalFill(Polygons& lower_top_parts, WeaveLayer& layer,
 {
     int64_t bridgable_dist = connectionHeight;
     
-//     Polygons& polys_below = lower_top_parts;
+    Polygons& polys_below = lower_top_parts;
     Polygons& polys_here = layer.supported;
     Polygons& polys_above = layer_above;
 
@@ -207,8 +191,8 @@ void Weaver::fillRoofs(Polygons& supporting, Polygons& to_be_supported, int dire
     Polygons roof_outlines; 
     Polygons roof_holes;
     { // split roofs into outlines and holes
-        std::vector<PolygonsPart> roof_parts = roofs.splitIntoParts();
-        for (PolygonsPart& roof_part : roof_parts)
+        std::vector<Polygons> roof_parts = roofs.splitIntoParts();
+        for (Polygons& roof_part : roof_parts)
         {
             roof_outlines.add(roof_part[0]);
             for (unsigned int hole_idx = 1; hole_idx < roof_part.size(); hole_idx++)
@@ -222,8 +206,8 @@ void Weaver::fillRoofs(Polygons& supporting, Polygons& to_be_supported, int dire
     
     Polygons supporting_outlines;
     
-    std::vector<PolygonsPart> supporting_parts = supporting.splitIntoParts();
-    for (PolygonsPart& supporting_part : supporting_parts) 
+    std::vector<Polygons> supporting_parts = supporting.splitIntoParts();
+    for (Polygons& supporting_part : supporting_parts) 
         supporting_outlines.add(supporting_part[0]); // only add outlines, not the holes
     
     
@@ -269,11 +253,11 @@ void Weaver::fillFloors(Polygons& supporting, Polygons& to_be_supported, int dir
     if (floors.size() == 0) return;
     
     
-    std::vector<PolygonsPart> floor_parts = floors.splitIntoParts();
+    std::vector<Polygons> floor_parts = floors.splitIntoParts();
     
     Polygons floor_outlines;
     Polygons floor_holes;
-    for (PolygonsPart& floor_part : floor_parts)
+    for (Polygons& floor_part : floor_parts)
     {
         floor_outlines.add(floor_part[0]);
         for (unsigned int hole_idx = 1; hole_idx < floor_part.size(); hole_idx++)
@@ -392,7 +376,7 @@ void Weaver::chainify_polygons(Polygons& parts1, Point start_close_to, Polygons&
     {
         const PolygonRef upperPart = parts1[prt];
         
-        ClosestPolygonPoint closestInPoly = PolygonUtils::findClosest(start_close_to, upperPart);
+        ClosestPolygonPoint closestInPoly = findClosest(start_close_to, upperPart);
 
         
         PolygonRef part_top = result.newPoly();
@@ -403,7 +387,7 @@ void Weaver::chainify_polygons(Polygons& parts1, Point start_close_to, Polygons&
         
         for (Point upper_point = upperPart[closestInPoly.pos]; found; upper_point = next_upper.location)
         {
-            found = PolygonUtils::getNextPointWithDistance(upper_point, nozzle_top_diameter, upperPart, idx, closestInPoly.pos, next_upper);
+            found = getNextPointWithDistance(upper_point, nozzle_top_diameter, upperPart, idx, closestInPoly.pos, next_upper);
 
             
             if (!found) 
@@ -453,7 +437,7 @@ void Weaver::connect_polygons(Polygons& supporting, int z0, Polygons& supported,
         for (const Point& upper_point : upperPart)
         {
             
-            ClosestPolygonPoint lowerPolyPoint = PolygonUtils::findClosest(upper_point, supporting);
+            ClosestPolygonPoint lowerPolyPoint = findClosest(upper_point, supporting);
             Point& lower = lowerPolyPoint.location;
             
             Point3 lower3 = Point3(lower.X, lower.Y, z0);
@@ -485,5 +469,5 @@ void Weaver::connect_polygons(Polygons& supporting, int z0, Polygons& supported,
 
 
 
-}//namespace cura
+} // namespace cura
     

src/Weaver.h

@@ -5,10 +5,9 @@
 #include "commandSocket.h"
 #include "settings.h"
 
-#include "MeshGroup.h"
+#include "modelFile/modelFile.h" // PrintObject
 #include "slicer.h"
 
-#include "utils/NoCopy.h"
 #include "utils/polygon.h"
 #include "utils/polygonUtils.h"
 
@@ -20,7 +19,7 @@ namespace cura
 /*!
  * The main weaver / WirePrint / wireframe printing class, which computes the basic paths to be followed.
  */
-class Weaver : public SettingsMessenger, NoCopy
+class Weaver : public SettingsBase
 {
     friend class Wireframe2gcode;
 private:
@@ -41,7 +40,8 @@ private:
    
     
 public:
-    Weaver(SettingsBase* settings_base) : SettingsMessenger(settings_base) 
+    
+    Weaver(SettingsBase* settings_base) : SettingsBase(settings_base) 
     {
         
         initial_layer_thickness = getSettingInMicrons("layer_height_0");
@@ -60,10 +60,10 @@ public:
      * This is the main function for Neith / Weaving / WirePrinting / Webbed printing.
      * Creates a wireframe for the model consisting of horizontal 'flat' parts and connections between consecutive flat parts consisting of UP moves and diagonally DOWN moves.
      * 
-     * \param objects The objects for which to create a wireframe print
+     * \param object The object for which to create a wireframe print
      * \param commandSocket the commandSocket
      */
-    void weave(MeshGroup* objects, CommandSocket* commandSocket);
+    void weave(PrintObject* object, CommandSocket* commandSocket);
     
 
 private:

src/Wireframe2gcode.cpp

@@ -4,38 +4,39 @@
 #include <fstream> // debug IO
 
 #include "weaveDataStorage.h"
-#include "Progress.h"
 
-#include "pathOrderOptimizer.h" // for skirt
 
 namespace cura 
 {
 
 
-void Wireframe2gcode::writeGCode(CommandSocket* commandSocket)
+void Wireframe2gcode::writeGCode(CommandSocket* commandSocket, int& maxObjectHeight)
 {
 
-    gcode.preSetup(wireFrame.meshgroup);
-    
     if (commandSocket)
         commandSocket->beginGCode();
     
-    processStartingCode(commandSocket);
+    maxObjectHeight = wireFrame.layers.back().z1;
     
-    int maxObjectHeight;
-    if (wireFrame.layers.empty())
-    {
-        maxObjectHeight = 0;
-    }
-    else
-    {
-        maxObjectHeight = wireFrame.layers.back().z1;
+    { // starting Gcode
+        if (hasSetting("material_bed_temperature") && getSettingInDegreeCelsius("material_bed_temperature") > 0)
+            gcode.writeBedTemperatureCommand(getSettingInDegreeCelsius("material_bed_temperature"), true);
+        if (hasSetting("material_print_temperature") && getSettingInDegreeCelsius("material_print_temperature") > 0)
+            gcode.writeTemperatureCommand(getSettingAsIndex("extruder_nr"), getSettingInDegreeCelsius("material_print_temperature"));
+        
+        gcode.writeCode(getSettingString("machine_start_gcode").c_str());
+        if (gcode.getFlavor() == GCODE_FLAVOR_BFB)
+        {
+            gcode.writeComment("enable auto-retraction");
+            std::ostringstream tmp;
+            tmp << "M227 S" << (getSettingInMicrons("retraction_amount") * 2560 / 1000) << " P" << (getSettingInMicrons("retraction_amount") * 2560 / 1000);  // TODO: put hard coded value in a variable with an explanatory name (and make var a parameter, and perhaps even a setting?)
+            gcode.writeLine(tmp.str().c_str());
+        }
     }
     
-    processSkirt(commandSocket);
     
             
-    unsigned int total_layers = wireFrame.layers.size();
+    unsigned int totalLayers = wireFrame.layers.size();
     gcode.writeLayerComment(0);
     gcode.writeTypeComment("SKIRT");
 
@@ -76,16 +77,18 @@ void Wireframe2gcode::writeGCode(CommandSocket* commandSocket)
                         gcode.writeMove(segment.to, speedBottom, extrusion_per_mm_flat); 
                 }
             );
-    Progress::messageProgressStage(Progress::Stage::EXPORT, nullptr, commandSocket);
+    
     for (unsigned int layer_nr = 0; layer_nr < wireFrame.layers.size(); layer_nr++)
     {
-        Progress::messageProgress(Progress::Stage::EXPORT, layer_nr+1, total_layers, commandSocket); // abuse the progress system of the normal mode of CuraEngine
+        
+        logProgress("export", layer_nr+1, totalLayers); // abuse the progress system of the normal mode of CuraEngine
+        if (commandSocket) commandSocket->sendProgress(2.0/3.0 + 1.0/3.0 * float(layer_nr) / float(totalLayers));
         
         WeaveLayer& layer = wireFrame.layers[layer_nr];
         
         gcode.writeLayerComment(layer_nr+1);
         
-        double fanSpeed = getSettingInPercentage("cool_fan_speed_max");
+        int fanSpeed = getSettingInPercentage("cool_fan_speed_max");
         if (layer_nr == 0)
             fanSpeed = getSettingInPercentage("cool_fan_speed_min");
         gcode.writeFanCommand(fanSpeed);
@@ -165,10 +168,12 @@ void Wireframe2gcode::writeGCode(CommandSocket* commandSocket)
     
     gcode.writeFanCommand(0);
 
-    finalize();
-    
     if (commandSocket)
     {
+        gcode.finalize(maxObjectHeight, getSettingInMillimetersPerSecond("speed_travel"), getSettingString("machine_end_gcode").c_str());
+        for(int e=0; e<MAX_EXTRUDERS; e++)
+            gcode.writeTemperatureCommand(e, 0, false);
+
         commandSocket->sendGCodeLayer();
         commandSocket->endSendSlicedObject();
     }
@@ -239,14 +244,11 @@ void Wireframe2gcode::strategy_retract(WeaveLayer& layer, WeaveConnectionPart& p
     
     RetractionConfig retraction_config;
     // TODO: get these from the settings!
-    retraction_config.distance = 500; //INT2MM(getSettingInt("retraction_amount"))
-    retraction_config.prime_volume = 0;//INT2MM(getSettingInt("retractionPrime
+    retraction_config.amount = 500; //INT2MM(getSettingInt("retractionAmount"))
+    retraction_config.primeAmount = 0;//INT2MM(getSettingInt("retractionPrime
     retraction_config.speed = 20; // 40;
     retraction_config.primeSpeed = 15; // 30;
     retraction_config.zHop = 0; //getSettingInt("retraction_hop");
-    retraction_config.retraction_count_max = getSettingAsCount("retraction_count_max");
-    retraction_config.retraction_extrusion_window = INT2MM(getSettingInMicrons("retraction_extrusion_window"));
-    retraction_config.retraction_min_travel_distance = getSettingInMicrons("retraction_min_travel");
 
     double top_retract_pause = 2.0;
     int retract_hop_dist = 1000;
@@ -404,16 +406,16 @@ void Wireframe2gcode::handle_roof_segment(WeaveRoofPart& inset, WeaveConnectionP
 
 
 
-void Wireframe2gcode::writeFill(std::vector<WeaveRoofPart>& infill_insets, Polygons& roof_outlines
+void Wireframe2gcode::writeFill(std::vector<WeaveRoofPart>& fill_insets, Polygons& roof_outlines
     , std::function<void (Wireframe2gcode& thiss, WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx)> connectionHandler
     , std::function<void (Wireframe2gcode& thiss, WeaveConnectionSegment& p)> flatHandler)
 {
         
     // bottom:
     gcode.writeTypeComment("FILL");
-    for (unsigned int inset_idx = 0; inset_idx < infill_insets.size(); inset_idx++)
+    for (unsigned int inset_idx = 0; inset_idx < fill_insets.size(); inset_idx++)
     {
-        WeaveRoofPart& inset = infill_insets[inset_idx];
+        WeaveRoofPart& inset = fill_insets[inset_idx];
         
         
         for (unsigned int inset_part_nr = 0; inset_part_nr < inset.connections.size(); inset_part_nr++)
@@ -482,10 +484,10 @@ void Wireframe2gcode::writeMoveWithRetract(Point to)
 }
 
 Wireframe2gcode::Wireframe2gcode(Weaver& weaver, GCodeExport& gcode, SettingsBase* settings_base) 
-: SettingsMessenger(settings_base) 
+: SettingsBase(settings_base) 
 , gcode(gcode)
-, wireFrame(weaver.wireFrame)
 {
+    wireFrame = weaver.wireFrame;
     initial_layer_thickness = getSettingInMicrons("layer_height_0");
     connectionHeight = getSettingInMicrons("wireframe_height"); 
     roof_inset = getSettingInMicrons("wireframe_roof_inset"); 
@@ -498,8 +500,8 @@ Wireframe2gcode::Wireframe2gcode(Weaver& weaver, GCodeExport& gcode, SettingsBas
     
     double filament_area = /* M_PI * */ (INT2MM(filament_diameter) / 2.0) * (INT2MM(filament_diameter) / 2.0);
     double lineArea = /* M_PI * */ (INT2MM(extrusionWidth) / 2.0) * (INT2MM(extrusionWidth) / 2.0);
-    extrusion_per_mm_connection = lineArea / filament_area * flowConnection / 100.0;
-    extrusion_per_mm_flat = lineArea / filament_area * flowFlat / 100.0;
+    extrusion_per_mm_connection = lineArea / filament_area * double(flowConnection) / 100.0;
+    extrusion_per_mm_flat = lineArea / filament_area * double(flowFlat) / 100.0;
     
     nozzle_outer_diameter = getSettingInMicrons("machine_nozzle_tip_outer_diameter"); // ___       ___   .
     nozzle_head_distance = getSettingInMicrons("machine_nozzle_head_distance");      //    |     |      .
@@ -540,90 +542,14 @@ Wireframe2gcode::Wireframe2gcode(Weaver& weaver, GCodeExport& gcode, SettingsBas
     roof_outer_delay = getSettingInSeconds("wireframe_roof_outer_delay");
     
     
-    standard_retraction_config.distance = INT2MM(getSettingInMicrons("retraction_amount"));
-    standard_retraction_config.prime_volume = getSettingInCubicMillimeters("retraction_extra_prime_amount");
+    standard_retraction_config.amount = INT2MM(getSettingInMicrons("retraction_amount"));
+    standard_retraction_config.primeAmount = INT2MM(getSettingInMicrons("retraction_extra_prime_amount"));
     standard_retraction_config.speed = getSettingInMillimetersPerSecond("retraction_retract_speed");
     standard_retraction_config.primeSpeed = getSettingInMillimetersPerSecond("retraction_prime_speed");
     standard_retraction_config.zHop = getSettingInMicrons("retraction_hop");
-    standard_retraction_config.retraction_count_max = getSettingAsCount("retraction_count_max");
-    standard_retraction_config.retraction_extrusion_window = INT2MM(getSettingInMicrons("retraction_extrusion_window"));
-    standard_retraction_config.retraction_min_travel_distance = getSettingInMicrons("retraction_min_travel");
-}
 
-void Wireframe2gcode::processStartingCode(CommandSocket* command_socket)
-{
-    if (gcode.getFlavor() == EGCodeFlavor::ULTIGCODE)
-    {
-        if (!command_socket)
-        {
-            gcode.writeCode(";FLAVOR:UltiGCode\n;TIME:666\n;MATERIAL:666\n;MATERIAL2:-1\n");
-        }
-    }
-    else 
-    {
-        if (getSettingBoolean("material_bed_temp_prepend"))
-        {
-            if (getSettingBoolean("machine_heated_bed") && getSettingInDegreeCelsius("material_bed_temperature") > 0)
-            {
-                gcode.writeBedTemperatureCommand(getSettingInDegreeCelsius("material_bed_temperature"), getSettingBoolean("material_bed_temp_wait"));
-            }
-        }
-        
-        if (getSettingBoolean("material_print_temp_prepend"))
-        {
-            if (getSettingInDegreeCelsius("material_print_temperature") > 0)
-            {
-                gcode.writeTemperatureCommand(getSettingAsIndex("extruder_nr"), getSettingInDegreeCelsius("material_print_temperature"));
-                if (getSettingBoolean("machine_print_temp_wait"))
-                {
-                    gcode.writeTemperatureCommand(getSettingAsIndex("extruder_nr"), getSettingInDegreeCelsius("material_print_temperature"), true);
-                }
-            }
-        }
-        
-    }
-    gcode.writeCode(getSettingString("machine_start_gcode").c_str());
-    
-    gcode.writeComment("Generated with Cura_SteamEngine " VERSION);
-    if (gcode.getFlavor() == EGCodeFlavor::BFB)
-    {
-        gcode.writeComment("enable auto-retraction");
-        std::ostringstream tmp;
-        tmp << "M227 S" << (getSettingInMicrons("retraction_amount") * 2560 / 1000) << " P" << (getSettingInMicrons("retraction_amount") * 2560 / 1000);
-        gcode.writeLine(tmp.str().c_str());
-    }
+
 }
 
 
-void Wireframe2gcode::processSkirt(CommandSocket* commandSocket)
-{
-    if (wireFrame.bottom_outline.size() == 0) //If we have no layers, don't create a skirt either.
-    {
-        return;
-    }
-    Polygons skirt = wireFrame.bottom_outline.offset(100000+5000).offset(-100000);
-    PathOrderOptimizer order(Point(INT32_MIN, INT32_MIN));
-    order.addPolygons(skirt);
-    order.optimize();
-    
-    for (unsigned int poly_idx = 0; poly_idx < skirt.size(); poly_idx++)
-    {
-        unsigned int actual_poly_idx = order.polyOrder[poly_idx];
-        PolygonRef poly = skirt[actual_poly_idx];
-        gcode.writeMove(poly[order.polyStart[actual_poly_idx]], getSettingInMillimetersPerSecond("speed_travel"), 0);
-        for (unsigned int point_idx = 0; point_idx < poly.size(); point_idx++)
-        {
-            Point& p = poly[(point_idx + order.polyStart[actual_poly_idx] + 1) % poly.size()];
-            gcode.writeMove(p, getSettingInMillimetersPerSecond("skirt_speed"), getSettingInMillimetersPerSecond("skirt_line_width"));
-        }
-    }
-}
-
-
-void Wireframe2gcode::finalize()
-{
-    gcode.finalize(getSettingInMillimetersPerSecond("speed_travel"), getSettingString("machine_end_gcode").c_str());
-    for(int e=0; e<getSettingAsCount("machine_extruder_count"); e++)
-        gcode.writeTemperatureCommand(e, 0, false);
-}
-}//namespace cura    
+} // namespace cura    

src/Wireframe2gcode.h

@@ -4,13 +4,11 @@
 
 #include <functional> // passing function pointer or lambda as argument to a function
 
-#include "utils/NoCopy.h"
-
 #include "weaveDataStorage.h"
 #include "commandSocket.h"
 #include "settings.h"
 
-#include "MeshGroup.h"
+#include "modelFile/modelFile.h" // PrintObject
 #include "slicer.h"
 
 #include "utils/polygon.h"
@@ -24,7 +22,7 @@ namespace cura
 /*!
  * Export class for exporting wireframe print gcode / weaver gcode / wireprint gcode.
  */
-class Wireframe2gcode : public SettingsMessenger, NoCopy
+class Wireframe2gcode : public SettingsBase
 {
 private:
     static const int STRATEGY_COMPENSATE = 0;
@@ -34,35 +32,35 @@ private:
     int initial_layer_thickness;
     int filament_diameter;
     int extrusionWidth;
-    double flowConnection;
-    double flowFlat; 
-    double extrusion_per_mm_connection; 
-    double extrusion_per_mm_flat; 
-    int nozzle_outer_diameter;
-    int nozzle_head_distance;
-    double nozzle_expansion_angle;
-    int nozzle_clearance;
-    int nozzle_top_diameter;
-    double moveSpeed;
-    double speedBottom;
-    double speedUp;
-    double speedDown;
-    double speedFlat;
-    int connectionHeight;
-    int roof_inset;
-    double flat_delay;
-    double bottom_delay;
-    double top_delay;
-    int up_dist_half_speed;
-    int top_jump_dist;
-    int fall_down;
-    int drag_along;
-    int strategy;
-    double go_back_to_last_top;
-    int straight_first_when_going_down;
-    int roof_fall_down;
-    int roof_drag_along;
-    double roof_outer_delay;
+    int flowConnection;// = getSettingInt("wireframeFlowConnection");
+    int flowFlat; // = getSettingInt("wireframeFlowFlat");
+    double extrusion_per_mm_connection; // = lineArea / filament_area * double(flowConnection) / 100.0;
+    double extrusion_per_mm_flat; // = lineArea / filament_area * double(flowFlat) / 100.0;
+    int nozzle_outer_diameter; // = getSettingInt("machineNozzleTipOuterDiameter"); // ___       ___   .
+    int nozzle_head_distance; // = getSettingInt("machineNozzleHeadDistance");      //    |     |      .
+    int nozzle_expansion_angle; // = getSettingInt("machineNozzleExpansionAngle");  //     \_U_/       .
+    int nozzle_clearance; // = getSettingInt("wireframeNozzleClearance");    // at least line width
+    int nozzle_top_diameter; // = tan(static_cast<double>(nozzle_expansion_angle)/180.0 * M_PI) * connectionHeight + nozzle_outer_diameter + nozzle_clearance;
+    int moveSpeed; // = 40;
+    int speedBottom; // =  getSettingInt("wireframePrintspeedBottom");
+    int speedUp; // = getSettingInt("wireframePrintspeedUp");
+    int speedDown; // = getSettingInt("wireframePrintspeedDown");
+    int speedFlat; // = getSettingInt("wireframePrintspeedFlat");
+    int connectionHeight; // = getSettingInt("wireframeConnectionHeight"); 
+    int roof_inset; // = getSettingInt("wireframeRoofInset"); 
+    double flat_delay; // = getSettingInt("wireframeFlatDelay")/100.0;
+    double bottom_delay; // = getSettingInt("wireframeBottomDelay")/100.0;
+    double top_delay; // = getSettingInt("wireframeTopDelay")/100.0;
+    int up_dist_half_speed; // = getSettingInt("wireframeUpDistHalfSpeed");
+    int top_jump_dist; // = getSettingInt("wireframeTopJump");
+    int fall_down; // = getSettingInt("wireframeFallDown");
+    int drag_along; // = getSettingInt("wireframeDragAlong");
+    int strategy; // = getSettingInt("wireframeStrategy"); //  HIGHER_BEND_NO_STRAIGHTEN; // RETRACT_TO_STRAIGHTEN; // MOVE_TO_STRAIGHTEN; // 
+    double go_back_to_last_top; // = false;
+    int straight_first_when_going_down; // = getSettingInt("wireframeStraightBeforeDown"); // %
+    int roof_fall_down; // = getSettingInt("wireframeRoofFallDown");
+    int roof_drag_along; // = getSettingInt("wireframeRoofDragAlong");
+    double roof_outer_delay; // = getSettingInt("wireframeRoofOuterDelay")/100.0;
     
     RetractionConfig standard_retraction_config; //!< The standard retraction settings used for moves between parts etc.
     
@@ -71,28 +69,13 @@ public:
     
     Wireframe2gcode(Weaver& weaver, GCodeExport& gcode, SettingsBase* settings_base);
     
-    void writeGCode(CommandSocket* commandSocket);
+    void writeGCode(CommandSocket* commandSocket, int& maxObjectHeight);
 
 
 private:
-    WireFrame& wireFrame;
+    WireFrame wireFrame;
     
-    /*!
-     * Startup gcode: nozzle temp up, retraction settings, bed temp
-     */
-    void processStartingCode(CommandSocket* command_socket);
-    
-    /*!
-     * Lay down a skirt
-     */
-    void processSkirt(CommandSocket* commandSocket);
-    
-    /*!
-     * End gcode: nozzle temp down
-     */
-    void finalize();
-    
-    void writeFill(std::vector<WeaveRoofPart>& infill_insets, Polygons& outlines
+    void writeFill(std::vector<WeaveRoofPart>& fill_insets, Polygons& outlines
         , std::function<void (Wireframe2gcode& thiss, WeaveRoofPart& inset, WeaveConnectionPart& part, unsigned int segment_idx)> connectionHandler
         , std::function<void (Wireframe2gcode& thiss, WeaveConnectionSegment& p)> flatHandler);
     

src/bridge.cpp

@@ -1,8 +1,6 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
 #include "bridge.h"
 
-#include "sliceDataStorage.h"
-
 namespace cura {
 
 int bridgeAngle(Polygons outline, SliceLayer* prevLayer)

src/bridge.h

@@ -2,9 +2,9 @@
 #ifndef BRIDGE_H
 #define BRIDGE_H
 
+#include "sliceDataStorage.h"
+
 namespace cura {
-    class Polygons;
-    class SliceLayer;
 
 int bridgeAngle(Polygons outline, SliceLayer* prevLayer);
 

src/comb.cpp

@@ -1,390 +1,236 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
 #include "comb.h"
 
-#include <algorithm>
-
-#include "utils/polygonUtils.h"
-#include "sliceDataStorage.h"
-#include "utils/SVG.h"
-
 namespace cura {
 
-
-// boundary_outside is only computed when it's needed!
-Polygons* Comb::getBoundaryOutside()
-{
-    if (!boundary_outside)
-    {
-        boundary_outside = new Polygons();
-        *boundary_outside =  storage.getLayerOutlines(layer_nr, false).offset(offset_from_outlines_outside); 
-    }
-    return boundary_outside;
-}
-  
-Comb::Comb(SliceDataStorage& storage, int layer_nr, Polygons& comb_boundary_inside, int64_t comb_boundary_offset, bool travel_avoid_other_parts, int64_t travel_avoid_distance)
-: storage(storage)
-, layer_nr(layer_nr)
-, offset_from_outlines(comb_boundary_offset) // between second wall and infill / other walls
-, max_moveInside_distance2(offset_from_outlines * 2 * offset_from_outlines * 2)
-, offset_from_outlines_outside(travel_avoid_distance)
-, avoid_other_parts(travel_avoid_other_parts)
-// , boundary_inside( boundary.offset(-offset_from_outlines) ) // TODO: make inside boundary configurable?
-, boundary_inside( comb_boundary_inside )
-, boundary_outside(nullptr)
-, partsView_inside( boundary_inside.splitIntoPartsView() ) // !! changes the order of boundary_inside !!
+bool Comb::preTest(Point startPoint, Point endPoint)
 {
+    return collisionTest(startPoint, endPoint);
 }
 
-Comb::~Comb()
-{
-    if (boundary_outside)
-        delete boundary_outside;
-}
-
-bool Comb::calc(Point startPoint, Point endPoint, CombPaths& combPaths, bool startInside, bool endInside, int64_t max_comb_distance_ignored)
-{
-    if (shorterThen(endPoint - startPoint, max_comb_distance_ignored))
-    {
-        return true;
-    }
-    
-
-    
-    //Move start and end point inside the comb boundary
-    unsigned int start_inside_poly = NO_INDEX;
-    if (startInside) 
-    {
-        start_inside_poly = PolygonUtils::moveInside(boundary_inside, startPoint, offset_extra_start_end, max_moveInside_distance2);
-        if (!boundary_inside.inside(start_inside_poly) || start_inside_poly == NO_INDEX)
-        {
-            if (start_inside_poly != NO_INDEX)
-            { // if not yet inside because of overshoot, try again
-                start_inside_poly = PolygonUtils::moveInside(boundary_inside, startPoint, offset_extra_start_end, max_moveInside_distance2);
-            }
-            if (start_inside_poly == NO_INDEX)    //If we fail to move the point inside the comb boundary we need to retract.
-            {
-                startInside = false;
-            }
-        }
-    }
-    unsigned int end_inside_poly = NO_INDEX;
-    if (endInside)
-    {
-        end_inside_poly = PolygonUtils::moveInside(boundary_inside, endPoint, offset_extra_start_end, max_moveInside_distance2);
-        if (!boundary_inside.inside(endPoint) || end_inside_poly == NO_INDEX)
-        {
-            if (end_inside_poly != NO_INDEX)
-            { // if not yet inside because of overshoot, try again
-                end_inside_poly = PolygonUtils::moveInside(boundary_inside, endPoint, offset_extra_start_end, max_moveInside_distance2);
-            }
-            if (end_inside_poly == NO_INDEX)    //If we fail to move the point inside the comb boundary we need to retract.
-            {
-                endInside = false;
-            }
-        }
-    }
-
-    
-    unsigned int start_part_boundary_poly_idx;
-    unsigned int end_part_boundary_poly_idx;
-    unsigned int start_part_idx =   (start_inside_poly == NO_INDEX)?    NO_INDEX : partsView_inside.getPartContaining(start_inside_poly, &start_part_boundary_poly_idx);
-    unsigned int end_part_idx =     (end_inside_poly == NO_INDEX)?      NO_INDEX : partsView_inside.getPartContaining(end_inside_poly, &end_part_boundary_poly_idx);
-    
-    if (startInside && endInside && start_part_idx == end_part_idx)
-    { // normal combing within part
-        PolygonsPart part = partsView_inside.assemblePart(start_part_idx);
-        combPaths.emplace_back();
-        LinePolygonsCrossings::comb(part, startPoint, endPoint, combPaths.back(), -offset_dist_to_get_from_on_the_polygon_to_outside, max_comb_distance_ignored);
-        return true;
-    }
-    else 
-    { // comb inside part to edge (if needed) >> move through air avoiding other parts >> comb inside end part upto the endpoint (if needed) 
-        Point middle_from;
-        Point middle_to;
-        Point inside_middle_from;
-        Point inside_middle_to;
-        
-        if (startInside && endInside)
-        {
-            ClosestPolygonPoint middle_from_cp = PolygonUtils::findClosest(endPoint, boundary_inside[start_part_boundary_poly_idx]);
-            ClosestPolygonPoint middle_to_cp = PolygonUtils::findClosest(middle_from_cp.location, boundary_inside[end_part_boundary_poly_idx]);
-//             walkToNearestSmallestConnection(middle_from_cp, middle_to_cp); // TODO: perform this optimization?
-            middle_from = middle_from_cp.location;
-            inside_middle_from = middle_from_cp.location;
-            middle_to = middle_to_cp.location;
-            inside_middle_to = middle_to_cp.location;
-            PolygonUtils::moveInside(boundary_inside,inside_middle_from,offset_dist_to_get_from_on_the_polygon_to_outside,max_comb_distance_ignored); //Also move the intermediary waypoint inside if it isn't yet.
-            PolygonUtils::moveInside(boundary_inside,inside_middle_to,offset_dist_to_get_from_on_the_polygon_to_outside,max_comb_distance_ignored);
-        }
-        else if(!startInside && !endInside)
-        {
-            middle_from = startPoint;
-            inside_middle_from = startPoint;
-            middle_to = endPoint;
-            inside_middle_to = endPoint;
-        }
-        else if(!startInside && endInside)
-        {
-            middle_from = startPoint;
-            inside_middle_from = startPoint;
-            ClosestPolygonPoint middle_to_cp = PolygonUtils::findClosest(middle_from,boundary_inside[end_part_boundary_poly_idx]);
-            middle_to = middle_to_cp.location;
-            inside_middle_to = middle_to_cp.location;
-            PolygonUtils::moveInside(boundary_inside,inside_middle_to,offset_dist_to_get_from_on_the_polygon_to_outside,max_comb_distance_ignored);
-        }
-        else if(startInside && !endInside)
-        {
-            middle_to = endPoint;
-            inside_middle_to = endPoint;
-            ClosestPolygonPoint middle_from_cp = PolygonUtils::findClosest(middle_to,boundary_inside[start_part_boundary_poly_idx]);
-            middle_from = middle_from_cp.location;
-            inside_middle_from = middle_from_cp.location;
-            PolygonUtils::moveInside(boundary_inside,inside_middle_from,offset_dist_to_get_from_on_the_polygon_to_outside,max_comb_distance_ignored);
-        }
-        
-        if (startInside)
-        {
-            // start to boundary
-            PolygonsPart part_begin = partsView_inside.assemblePart(start_part_idx); // comb through the starting part only
-            combPaths.emplace_back();
-            LinePolygonsCrossings::comb(part_begin, startPoint, inside_middle_from, combPaths.back(), -offset_dist_to_get_from_on_the_polygon_to_outside, max_comb_distance_ignored);
-        }
-        
-        // throught air from boundary to boundary
-        if (avoid_other_parts)
-        {
-            Polygons& middle = *getBoundaryOutside(); // comb through all air, since generally the outside consists of a single part
-            Point from_outside = middle_from;
-            if (startInside || middle.inside(from_outside, true))
-            { // move outside
-                PolygonUtils::moveInside(middle, from_outside, -offset_extra_start_end, max_moveInside_distance2);
-            }
-            Point to_outside = middle_to;
-            if (endInside || middle.inside(to_outside, true))
-            { // move outside
-                PolygonUtils::moveInside(middle, to_outside, -offset_extra_start_end, max_moveInside_distance2);
-            }
-            combPaths.emplace_back();
-            combPaths.back().throughAir = true;
-            if ( vSize(inside_middle_from - inside_middle_to) < vSize(inside_middle_from - from_outside) + vSize(inside_middle_to - to_outside) )
-            { // via outside is a detour
-                combPaths.back().push_back(inside_middle_from);
-                combPaths.back().push_back(inside_middle_to);
-            }
-            else
-            {
-                LinePolygonsCrossings::comb(middle, from_outside, to_outside, combPaths.back(), offset_dist_to_get_from_on_the_polygon_to_outside, max_comb_distance_ignored);
-            }
-        }
-        else 
-        { // directly through air (not avoiding other parts)
-            combPaths.emplace_back();
-            combPaths.back().throughAir = true;
-            combPaths.back().cross_boundary = true; // TODO: calculate whether we cross a boundary!
-            combPaths.back().push_back(inside_middle_from);
-            combPaths.back().push_back(inside_middle_to);
-        }
-        
-        if (endInside)
-        {
-            // boundary to end
-            PolygonsPart part_end = partsView_inside.assemblePart(end_part_idx); // comb through end part only
-            combPaths.emplace_back();
-            LinePolygonsCrossings::comb(part_end, inside_middle_to, endPoint, combPaths.back(), -offset_dist_to_get_from_on_the_polygon_to_outside, max_comb_distance_ignored);
-        }
-        
-        return true;
-    }
-}
-
-void LinePolygonsCrossings::calcScanlineCrossings()
-{
-    
-    min_crossing_idx = NO_INDEX;
-    max_crossing_idx = NO_INDEX;
-        
-    for(unsigned int poly_idx = 0; poly_idx < boundary.size(); poly_idx++)
-    {
-        PolyCrossings minMax(poly_idx); 
-        PolygonRef poly = boundary[poly_idx];
-        Point p0 = transformation_matrix.apply(poly[poly.size() - 1]);
-        for(unsigned int point_idx = 0; point_idx < poly.size(); point_idx++)
-        {
-            Point p1 = transformation_matrix.apply(poly[point_idx]);
-            if((p0.Y >= transformed_startPoint.Y && p1.Y <= transformed_startPoint.Y) || (p1.Y >= transformed_startPoint.Y && p0.Y <= transformed_startPoint.Y))
-            {
-                if(p1.Y == p0.Y) //Line segment is parallel with the scanline. That means that both endpoints lie on the scanline, so they will have intersected with the adjacent line.
-                {
-                    p0 = p1;
-                    continue;
-                }
-                int64_t x = p0.X + (p1.X - p0.X) * (transformed_startPoint.Y - p0.Y) / (p1.Y - p0.Y);
-                
-                if (x >= transformed_startPoint.X && x <= transformed_endPoint.X)
-                {
-                    if(x < minMax.min.x) //For the leftmost intersection, move x left to stay outside of the border.
-                                         //Note: The actual distance from the intersection to the border is almost always less than dist_to_move_boundary_point_outside, since it only moves along the direction of the scanline.
-                    {
-                        minMax.min.x = x;
-                        minMax.min.point_idx = point_idx;
-                    }
-                    if(x > minMax.max.x) //For the rightmost intersection, move x right to stay outside of the border.
-                    {
-                        minMax.max.x = x;
-                        minMax.max.point_idx = point_idx;
-                    }
-                }
-            }
-            p0 = p1;
-        }
-        
-        if (minMax.min.point_idx != NO_INDEX)
-        { // then also max.point_idx != -1
-            if (min_crossing_idx == NO_INDEX || minMax.min.x < crossings[min_crossing_idx].min.x) { min_crossing_idx = crossings.size(); }
-            if (max_crossing_idx == NO_INDEX || minMax.max.x > crossings[max_crossing_idx].max.x) { max_crossing_idx = crossings.size(); }
-            crossings.push_back(minMax);
-        }
-        
-    }
-}
-
-
-bool LinePolygonsCrossings::lineSegmentCollidesWithBoundary()
+bool Comb::collisionTest(Point startPoint, Point endPoint)
 {
     Point diff = endPoint - startPoint;
 
-    transformation_matrix = PointMatrix(diff);
-    transformed_startPoint = transformation_matrix.apply(startPoint);
-    transformed_endPoint = transformation_matrix.apply(endPoint);
-
-    for(PolygonRef poly : boundary)
+    matrix = PointMatrix(diff);
+    sp = matrix.apply(startPoint);
+    ep = matrix.apply(endPoint);
+    
+    for(unsigned int n=0; n<boundery.size(); n++)
     {
-        Point p0 = transformation_matrix.apply(poly.back());
-        for(Point p1_ : poly)
+        if (boundery[n].size() < 1)
+            continue;
+        Point p0 = matrix.apply(boundery[n][boundery[n].size()-1]);
+        for(unsigned int i=0; i<boundery[n].size(); i++)
         {
-            Point p1 = transformation_matrix.apply(p1_);
-            if ((p0.Y > transformed_startPoint.Y && p1.Y < transformed_startPoint.Y) || (p1.Y > transformed_startPoint.Y && p0.Y < transformed_startPoint.Y))
+            Point p1 = matrix.apply(boundery[n][i]);
+            if ((p0.Y > sp.Y && p1.Y < sp.Y) || (p1.Y > sp.Y && p0.Y < sp.Y))
             {
-                int64_t x = p0.X + (p1.X - p0.X) * (transformed_startPoint.Y - p0.Y) / (p1.Y - p0.Y);
+                int64_t x = p0.X + (p1.X - p0.X) * (sp.Y - p0.Y) / (p1.Y - p0.Y);
                 
-                if (x > transformed_startPoint.X && x < transformed_endPoint.X)
+                if (x > sp.X && x < ep.X)
                     return true;
             }
             p0 = p1;
         }
     }
-    
     return false;
 }
 
-
-void LinePolygonsCrossings::getCombingPath(CombPath& combPath, int64_t max_comb_distance_ignored)
+void Comb::calcMinMax()
 {
-    if (shorterThen(endPoint - startPoint, max_comb_distance_ignored) || !lineSegmentCollidesWithBoundary())
+    for(unsigned int n=0; n<boundery.size(); n++)
     {
-        //We're not crossing any boundaries. So skip the comb generation.
-        combPath.push_back(startPoint); 
-        combPath.push_back(endPoint);
-        return;
-    }
-    
-    calcScanlineCrossings();
-    
-    CombPath basicPath;
-    getBasicCombingPath(basicPath);
-    optimizePath(basicPath, combPath);
-}
-
-
-void LinePolygonsCrossings::getBasicCombingPath(CombPath& combPath) 
-{
-    for (PolyCrossings* crossing = getNextPolygonAlongScanline(transformed_startPoint.X)
-        ; crossing != nullptr
-        ; crossing = getNextPolygonAlongScanline(crossing->max.x))
-    {
-        getBasicCombingPath(*crossing, combPath);
-    }
-    combPath.push_back(endPoint);
-}
-
-void LinePolygonsCrossings::getBasicCombingPath(PolyCrossings& polyCrossings, CombPath& combPath) 
-{
-    PolygonRef poly = boundary[polyCrossings.poly_idx];
-    combPath.push_back(transformation_matrix.unapply(Point(polyCrossings.min.x + dist_to_move_boundary_point_outside, transformed_startPoint.Y)));
-    if ( ( polyCrossings.max.point_idx - polyCrossings.min.point_idx + poly.size() ) % poly.size() 
-        < poly.size() / 2 )
-    { // follow the path in the same direction as the winding order of the boundary polygon
-        for(unsigned int point_idx = polyCrossings.min.point_idx
-            ; point_idx != polyCrossings.max.point_idx
-            ; point_idx = (point_idx < poly.size() - 1) ? (point_idx + 1) : (0))
+        minX[n] = INT64_MAX;
+        maxX[n] = INT64_MIN;
+        Point p0 = matrix.apply(boundery[n][boundery[n].size()-1]);
+        for(unsigned int i=0; i<boundery[n].size(); i++)
         {
-            combPath.push_back(PolygonUtils::getBoundaryPointWithOffset(poly, point_idx, dist_to_move_boundary_point_outside));
+            Point p1 = matrix.apply(boundery[n][i]);
+            if ((p0.Y > sp.Y && p1.Y < sp.Y) || (p1.Y > sp.Y && p0.Y < sp.Y))
+            {
+                int64_t x = p0.X + (p1.X - p0.X) * (sp.Y - p0.Y) / (p1.Y - p0.Y);
+                
+                if (x >= sp.X && x <= ep.X)
+                {
+                    if (x < minX[n]) { minX[n] = x; minIdx[n] = i; }
+                    if (x > maxX[n]) { maxX[n] = x; maxIdx[n] = i; }
+                }
+            }
+            p0 = p1;
         }
     }
-    else
-    { // follow the path in the opposite direction of the winding order of the boundary polygon
-        unsigned int min_idx = (polyCrossings.min.point_idx == 0)? poly.size() - 1: polyCrossings.min.point_idx - 1;
-        unsigned int max_idx = (polyCrossings.max.point_idx == 0)? poly.size() - 1: polyCrossings.max.point_idx - 1;
-
-        for(unsigned int point_idx = min_idx; point_idx != max_idx; point_idx = (point_idx > 0) ? (point_idx - 1) : (poly.size() - 1))
-        {
-            combPath.push_back(PolygonUtils::getBoundaryPointWithOffset(poly, point_idx, dist_to_move_boundary_point_outside));
-        }
-    }
-    combPath.push_back(transformation_matrix.unapply(Point(polyCrossings.max.x - dist_to_move_boundary_point_outside, transformed_startPoint.Y))); 
 }
 
-
-
-LinePolygonsCrossings::PolyCrossings* LinePolygonsCrossings::getNextPolygonAlongScanline(int64_t x)
+unsigned int Comb::getPolygonAbove(int64_t x)
 {
-    PolyCrossings* ret = nullptr;
-    for(PolyCrossings& crossing : crossings)
+    int64_t min = POINT_MAX;
+    unsigned int ret = NO_INDEX;
+    for(unsigned int n=0; n<boundery.size(); n++)
     {
-        if (crossing.min.x > x && (ret == nullptr || crossing.min.x < ret->min.x) )
+        if (minX[n] > x && minX[n] < min)
         {
-            ret = &crossing;
+            min = minX[n];
+            ret = n;
         }
     }
     return ret;
 }
 
-bool LinePolygonsCrossings::optimizePath(CombPath& comb_path, CombPath& optimized_comb_path) 
+Point Comb::getBounderyPointWithOffset(unsigned int polygonNr, unsigned int idx)
 {
-    optimized_comb_path.push_back(startPoint);
-    for(unsigned int point_idx = 1; point_idx<comb_path.size(); point_idx++)
+    Point p0 = boundery[polygonNr][(idx > 0) ? (idx - 1) : (boundery[polygonNr].size() - 1)];
+    Point p1 = boundery[polygonNr][idx];
+    Point p2 = boundery[polygonNr][(idx < (boundery[polygonNr].size() - 1)) ? (idx + 1) : (0)];
+    
+    Point off0 = crossZ(normal(p1 - p0, MM2INT(1.0)));
+    Point off1 = crossZ(normal(p2 - p1, MM2INT(1.0)));
+    Point n = normal(off0 + off1, MM2INT(0.2));
+    
+    return p1 + n;
+}
+
+Comb::Comb(Polygons& _boundery)
+: boundery(_boundery)
+{
+    minX = new int64_t[boundery.size()];
+    maxX = new int64_t[boundery.size()];
+    minIdx = new unsigned int[boundery.size()];
+    maxIdx = new unsigned int[boundery.size()];
+}
+
+Comb::~Comb()
+{
+    delete[] minX;
+    delete[] maxX;
+    delete[] minIdx;
+    delete[] maxIdx;
+}
+
+bool Comb::moveInside(Point* p, int distance)
+{
+    Point ret = *p;
+    int64_t bestDist = MM2INT(2.0) * MM2INT(2.0);
+    for(unsigned int n=0; n<boundery.size(); n++)
     {
-        if(comb_path[point_idx] == comb_path[point_idx - 1]) //Two points are the same. Skip the second.
-        {
+        if (boundery[n].size() < 1)
             continue;
-        }
-        Point& current_point = optimized_comb_path.back();
-        if (PolygonUtils::polygonCollidesWithlineSegment(boundary, current_point, comb_path[point_idx]))
+        Point p0 = boundery[n][boundery[n].size()-1];
+        for(unsigned int i=0; i<boundery[n].size(); i++)
         {
-            if (PolygonUtils::polygonCollidesWithlineSegment(boundary, current_point, comb_path[point_idx - 1]))
-            {
-                comb_path.cross_boundary = true;
-            }
-            optimized_comb_path.push_back(comb_path[point_idx - 1]);
-        }
-        else 
-        {
-            // : dont add the newest point
+            Point p1 = boundery[n][i];
             
-            // TODO: add the below extra optimization? (+/- 7% extra computation time, +/- 2% faster print for Dual_extrusion_support_generation.stl)
-            while (optimized_comb_path.size() > 1)
+            //Q = A + Normal( B - A ) * ((( B - A ) dot ( P - A )) / VSize( A - B ));
+            Point pDiff = p1 - p0;
+            int64_t lineLength = vSize(pDiff);
+            int64_t distOnLine = dot(pDiff, *p - p0) / lineLength;
+            if (distOnLine < 10)
+                distOnLine = 10;
+            if (distOnLine > lineLength - 10)
+                distOnLine = lineLength - 10;
+            Point q = p0 + pDiff * distOnLine / lineLength;
+            
+            int64_t dist = vSize2(q - *p);
+            if (dist < bestDist)
             {
-                if (PolygonUtils::polygonCollidesWithlineSegment(boundary, optimized_comb_path[optimized_comb_path.size() - 2], comb_path[point_idx]))
-                {
-                    break;
-                }
-                else 
-                {
-                    optimized_comb_path.pop_back();
-                }
+                bestDist = dist;
+                ret = q + crossZ(normal(p1 - p0, distance));
             }
+            
+            p0 = p1;
         }
     }
+    if (bestDist < MM2INT(2.0) * MM2INT(2.0))
+    {
+        *p = ret;
+        return true;
+    }
+    return false;
+}
+
+bool Comb::calc(Point startPoint, Point endPoint, std::vector<Point>& combPoints)
+{
+    if (shorterThen(endPoint - startPoint, MM2INT(1.5)))
+        return true;
+    
+    bool addEndpoint = false;
+    //Check if we are inside the comb boundaries
+    if (!boundery.inside(startPoint))
+    {
+        if (!moveInside(&startPoint))    //If we fail to move the point inside the comb boundary we need to retract.
+            return false;
+        combPoints.push_back(startPoint);
+    }
+    if (!boundery.inside(endPoint))
+    {
+        if (!moveInside(&endPoint))    //If we fail to move the point inside the comb boundary we need to retract.
+            return false;
+        addEndpoint = true;
+    }
+    
+    //Check if we are crossing any bounderies, and pre-calculate some values.
+    if (!preTest(startPoint, endPoint))
+    {
+        //We're not crossing any boundaries. So skip the comb generation.
+        if (!addEndpoint && combPoints.size() == 0) //Only skip if we didn't move the start and end point.
+            return true;
+    }
+    
+    //Calculate the minimum and maximum positions where we cross the comb boundary
+    calcMinMax();
+    
+    int64_t x = sp.X;
+    std::vector<Point> pointList;
+    //Now walk trough the crossings, for every boundary we cross, find the initial cross point and the exit point. Then add all the points in between
+    // to the pointList and continue with the next boundary we will cross, until there are no more boundaries to cross.
+    // This gives a path from the start to finish curved around the holes that it encounters.
+    while(true)
+    {
+        unsigned int n = getPolygonAbove(x);
+        if (n == NO_INDEX) break;
+        
+        pointList.push_back(matrix.unapply(Point(minX[n] - MM2INT(0.2), sp.Y)));
+        if ( (minIdx[n] - maxIdx[n] + boundery[n].size()) % boundery[n].size() > (maxIdx[n] - minIdx[n] + boundery[n].size()) % boundery[n].size())
+        {
+            for(unsigned int i=minIdx[n]; i != maxIdx[n]; i = (i < boundery[n].size() - 1) ? (i + 1) : (0))
+            {
+                pointList.push_back(getBounderyPointWithOffset(n, i));
+            }
+        }else{
+            if (minIdx[n] == 0)
+                minIdx[n] = boundery[n].size() - 1;
+            else
+                minIdx[n]--;
+            if (maxIdx[n] == 0)
+                maxIdx[n] = boundery[n].size() - 1;
+            else
+                maxIdx[n]--;
+            
+            for(unsigned int i=minIdx[n]; i != maxIdx[n]; i = (i > 0) ? (i - 1) : (boundery[n].size() - 1))
+            {
+                pointList.push_back(getBounderyPointWithOffset(n, i));
+            }
+        }
+        pointList.push_back(matrix.unapply(Point(maxX[n] + MM2INT(0.2), sp.Y)));
+        
+        x = maxX[n];
+    }
+    pointList.push_back(endPoint);
+    
+    //Optimize the pointList, skip each point we could already reach by not crossing a boundary. This smooths out the path and makes it skip any unneeded corners.
+    Point p0 = startPoint;
+    for(unsigned int n=1; n<pointList.size(); n++)
+    {
+        if (collisionTest(p0, pointList[n]))
+        {
+            if (collisionTest(p0, pointList[n-1]))
+                return false;
+            p0 = pointList[n-1];
+            combPoints.push_back(p0);
+        }
+    }
+    if (addEndpoint)
+        combPoints.push_back(endPoint);
     return true;
 }
 

src/comb.h

@@ -4,252 +4,39 @@
 
 #include "utils/polygon.h"
 
-namespace cura 
-{
-    
-struct CombPath : public  std::vector<Point> //!< A single path either inside or outise the parts
-{
-    bool throughAir = false; //!< Whether the path is one which moves through air.
-    bool cross_boundary = false; //!< Whether the path crosses a boundary.
-};
-struct CombPaths : public  std::vector<CombPath> //!< A list of paths alternating between inside a part and outside a part
-{
-}; 
+namespace cura {
 
-/*!
- * Class for generating a combing move action from point a to point b and avoiding collision with other parts when moving through air.
- * See LinePolygonsCrossings::comb.
- * 
- * The general implementation is by rotating everything such that the the line segment from a to b is aligned with the x-axis.
- * We call the line on which a and b lie the 'scanline'.
- * 
- * The basic path is generated by following the scanline until it hits a polygon, then follow the polygon until the last point where it hits the scanline, 
- * follow the scanline again, etc.
- * The path is offsetted from the polygons, so that it doesn't intersect with them.
- * 
- * Next the basic path is optimized by taking shortcuts where possible. Only shortcuts which skip a single point are considered, in order to reduce computational complexity.
- */
-class LinePolygonsCrossings
+class Comb
 {
 private:
-    
-    /*!
-     * A Crossing holds data on a single point where a polygon crosses the scanline.
-     */
-    struct Crossing
-    {
-        int64_t x; //!< x coordinate of crossings between the polygon and the scanline.
-        unsigned int point_idx; //!< The index of the first point of the line segment which crosses the scanline
-        
-        /*!
-         * Creates a Crossing with minimal initialization
-         * \param x The x-coordinate in transformed space
-         * \param point_idx The index of the first point of the line segment which crosses the scanline
-         */
-        Crossing(int64_t x, unsigned int point_idx)
-        : x(x), point_idx(point_idx)
-        {
-        }
-    };
-    
-    /*!
-     * A PolyCrossings holds data on where a polygon crosses the scanline. Only the Crossing with lowest Crossing::x and highest are recorded.
-     */
-    struct PolyCrossings
-    {
-        unsigned int poly_idx; //!< The index of the polygon which crosses the scanline
-        Crossing min; //!< The point where the polygon first crosses the scanline.
-        Crossing max; //!< The point where the polygon last crosses the scanline.
-        /*!
-         * Create a PolyCrossings with minimal initialization. PolyCrossings::min and PolyCrossings::max are not yet computed.
-         * \param poly_idx The index of the polygon in LinePolygonsCrossings::boundary
-         */
-        PolyCrossings(unsigned int poly_idx) 
-        : poly_idx(poly_idx)
-        , min(INT64_MAX, NO_INDEX), max(INT64_MIN, NO_INDEX) 
-        { 
-        }
-    };
+    Polygons& boundery;
 
-    /*!
-     * A PolyCrossings list: for every polygon a PolyCrossings.
-     */
-    struct PartCrossings : public std::vector<PolyCrossings>
-    {
-        //unsigned int part_idx;
-    };
-    
-    
-    PartCrossings crossings; //!< All crossings of polygons in the LinePolygonsCrossings::boundary with the scanline.
-    unsigned int min_crossing_idx; //!< The index into LinePolygonsCrossings::crossings to the crossing with the minimal PolyCrossings::min crossing of all PolyCrossings's.
-    unsigned int max_crossing_idx; //!< The index into LinePolygonsCrossings::crossings to the crossing with the maximal PolyCrossings::max crossing of all PolyCrossings's.
-    
-    Polygons& boundary; //!< The boundary not to cross during combing.
-    Point startPoint; //!< The start point of the scanline.
-    Point endPoint; //!< The end point of the scanline.
-    
-    int64_t dist_to_move_boundary_point_outside; //!< The distance used to move outside or inside so that a boundary point doesn't intersect with the boundary anymore. Neccesary due to computational rounding problems. Use negative value for insicde combing.
-    
-    PointMatrix transformation_matrix; //!< The transformation which rotates everything such that the scanline is aligned with the x-axis.
-    Point transformed_startPoint; //!< The LinePolygonsCrossings::startPoint as transformed by Comb::transformation_matrix
-    Point transformed_endPoint; //!< The LinePolygonsCrossings::endPoint as transformed by Comb::transformation_matrix
+    int64_t* minX;
+    int64_t* maxX;
+    unsigned int* minIdx;
+    unsigned int* maxIdx;
 
-    
-    /*!
-     * Check if we are crossing the boundaries, and pre-calculate some values.
-     * 
-     * Sets Comb::transformation_matrix, Comb::transformed_startPoint and Comb::transformed_endPoint
-     * \return Whether the line segment from LinePolygonsCrossings::startPoint to LinePolygonsCrossings::endPoint collides with the boundary
-     */
-    bool lineSegmentCollidesWithBoundary();
-    
-    /*!
-     * Calculate Comb::crossings, Comb::min_crossing_idx and Comb::max_crossing_idx.
-     */
-    void calcScanlineCrossings();
-    
-    /*! 
-     * Get the basic combing path and optimize it.
-     * 
-     * \param combPath Output parameter: the points along the combing path.
-     */
-    void getCombingPath(CombPath& combPath, int64_t max_comb_distance_ignored = MM2INT(1.5));
-    
-    /*! 
-     * Get the basic combing path, without shortcuts. The path goes straight toward the endPoint and follows the boundary when it hits it, until it passes the scanline again.
-     * 
-     * Walk trough the crossings, for every boundary we cross, find the initial cross point and the exit point. Then add all the points in between
-     * to the \p combPath and continue with the next boundary we will cross, until there are no more boundaries to cross.
-     * This gives a path from the start to finish curved around the holes that it encounters.
-     * 
-     * \param combPath Output parameter: the points along the combing path.
-     */
-    void getBasicCombingPath(CombPath& combPath);
-    
-    /*! 
-     * Get the basic combing path, following a single boundary polygon when it hits it, until it passes the scanline again.
-     * 
-     * Find the initial cross point and the exit point. Then add all the points in between
-     * to the \p combPath and continue with the next boundary we will cross, until there are no more boundaries to cross.
-     * This gives a path from the start to finish curved around the polygon that it encounters.
-     * 
-     * \param combPath Output parameter: where to add the points along the combing path.
-     */
-    void getBasicCombingPath(PolyCrossings& crossings, CombPath& combPath);
-    
-    /*!
-     * Find the first polygon cutting the scanline after \p x.
-     * 
-     * Note that this function only looks at the first segment cutting the scanline (see Comb::minX)!
-     * It doesn't return the next polygon which crosses the scanline, but the first polygon crossing the scanline for the first time.
-     * 
-     * \param x The point on the scanline from where to look.
-     * \return The next PolyCrossings fully beyond \p x or one with PolyCrossings::poly_idx set to NO_INDEX if there's none left.
-     */
-    PolyCrossings* getNextPolygonAlongScanline(int64_t x);
-    
-    /*!
-     * Optimize the \p comb_path: skip each point we could already reach by not crossing a boundary. This smooths out the path and makes it skip some unneeded corners.
-     * 
-     * \param comb_path The unoptimized combing path.
-     * \param optimized_comb_path Output parameter: The points of optimized combing path
-     * \return Whether it turns out that the basic comb path already crossed a boundary
-     */
-    bool optimizePath(CombPath& comb_path, CombPath& optimized_comb_path);
-    
-    /*!
-     * Create a LinePolygonsCrossings with minimal initialization.
-     * \param boundary The boundary which not to cross during combing
-     * \param start the starting point
-     * \param end the end point
-     * \param dist_to_move_boundary_point_outside Distance used to move a point from a boundary so that it doesn't intersect with it anymore. (Precision issue)
-     */
-    LinePolygonsCrossings(Polygons& boundary, Point& start, Point& end, int64_t dist_to_move_boundary_point_outside)
-    : boundary(boundary), startPoint(start), endPoint(end), dist_to_move_boundary_point_outside(dist_to_move_boundary_point_outside)
-    {
-    }
-    
-public: 
-    
-    /*!
-     * The main function of this class: calculate one combing path within the boundary.
-     * \param boundary The polygons to follow when calculating the basic combing path
-     * \param startPoint From where to start the combing move.
-     * \param endPoint Where to end the combing move.
-     * \param combPath Output parameter: the combing path generated.
-     */
-    static void comb(Polygons& boundary, Point startPoint, Point endPoint, CombPath& combPath, int64_t dist_to_move_boundary_point_outside, int64_t max_comb_distance_ignored = MM2INT(1.5))
-    {
-        LinePolygonsCrossings linePolygonsCrossings(boundary, startPoint, endPoint, dist_to_move_boundary_point_outside);
-        linePolygonsCrossings.getCombingPath(combPath, max_comb_distance_ignored);
-    };
-};
+    PointMatrix matrix;
+    Point sp;
+    Point ep;
 
-class SliceDataStorage;
+    bool preTest(Point startPoint, Point endPoint);    
+    bool collisionTest(Point startPoint, Point endPoint);
 
-/*!
- * Class for generating a full combing actions from a travel move from a start point to an end point.
- * A single Comb object is used for each layer.
- * 
- * Comb::calc is the main function of this class.
- * 
- * Typical output: A combing path to the boundary of the polygon + a move through air avoiding other parts in the layer + a combing path from the boundary of the ending polygon to the end point.
- * Each of these three is a CombPath; the first and last are within Comb::boundary_inside while the middle is outside of Comb::boundary_outside.
- * Between these there is a little gap where the nozzle crosses the boundary of an object approximately perpendicular to its boundary.
- * 
- * As an optimization, the combing paths inside are calculated on specifically those PolygonsParts within which to comb, while the coundary_outside isn't split into outside parts, 
- * because generally there is only one outside part; encapsulated holes occur less often.
- */
-class Comb 
-{
-    friend class LinePolygonsCrossings;
-private:
-    SliceDataStorage& storage; //!< The storage from which to compute the outside boundary, when needed.
-    int layer_nr; //!< The layer number for the layer for which to compute the outside boundary, when needed.
+    void calcMinMax();
     
-    int64_t offset_from_outlines; //!< Offset from the boundary of a part to the comb path. (nozzle width / 2)
-    int64_t max_moveInside_distance2; //!< Maximal distance of a point to the Comb::boundary_inside which is still to be considered inside. (very sharp corners not allowed :S)
-    int64_t offset_from_outlines_outside; //!< Offset from the boundary of a part to a travel path which avoids it by this distance.
-    static const int64_t max_moveOutside_distance2 = INT64_MAX; //!< Any point which is not inside should be considered outside.
-    static const int64_t offset_dist_to_get_from_on_the_polygon_to_outside = 40; //!< in order to prevent on-boundary vs crossing boundary confusions (precision thing)
-    static const int64_t offset_extra_start_end = 100; //!< Distance to move start point and end point toward eachother to extra avoid collision with the boundaries.
+    unsigned int getPolygonAbove(int64_t x);
     
-    bool avoid_other_parts; //!< Whether to perform inverse combing a.k.a. avoid parts.
-    
-    Polygons& boundary_inside; //!< The boundary within which to comb.
-    Polygons* boundary_outside; //!< The boundary outside of which to stay to avoid collision with other layer parts. This is a pointer cause we only compute it when we move outside the boundary (so not when there is only a single part in the layer)
-    PartsView partsView_inside; //!< Structured indices onto boundary_inside which shows which polygons belong to which part. 
-
-    /*!
-     * Get the boundary_outside, which is an offset from the outlines of all meshes in the layer. Calculate it when it hasn't been calculated yet.
-     */
-    Polygons* getBoundaryOutside();
+    Point getBounderyPointWithOffset(unsigned int polygonNr, unsigned int idx);
     
 public:
-    /*!
-     * Initializes the combing areas for every mesh in the layer (not support)
-     * \param storage Where the layer polygon data is stored
-     * \param layer_nr The number of the layer for which to generate the combing areas.
-     * \param comb_boundary_inside The comb boundary within which to comb within layer parts.
-     * \param offset_from_outlines The offset from the outline polygon, to create the combing boundary in case there is no second wall.
-     * \param travel_avoid_other_parts Whether to avoid other layer parts when traveling through air.
-     * \param travel_avoid_distance The distance by which to avoid other layer parts when traveling through air.
-     */
-    Comb(SliceDataStorage& storage, int layer_nr, Polygons& comb_boundary_inside, int64_t offset_from_outlines, bool travel_avoid_other_parts, int64_t travel_avoid_distance);
-    
+    Comb(Polygons& _boundery);
     ~Comb();
-
-    /*!
-     * Calculate the comb paths (if any) - one for each polygon combed alternated with travel paths
-     * 
-     * \param startPoint Where to start moving from
-     * \param endPoint Where to move to
-     * \param combPoints Output parameter: The points along the combing path, excluding the \p startPoint (?) and \p endPoint
-     * \param startInside Whether we want to start inside the comb boundary
-     * \param endInside Whether we want to end up inside the comb boundary
-     * \return Whether combing has succeeded; otherwise a retraction is needed.
-     */    
-    bool calc(Point startPoint, Point endPoint, CombPaths& combPaths, bool startInside = false, bool endInside = false, int64_t max_comb_distance_ignored = MM2INT(1.5));
+    
+    bool inside(const Point p) { return boundery.inside(p); }
+    bool moveInside(Point* p, int distance = 100);
+    
+    bool calc(Point startPoint, Point endPoint, std::vector<Point>& combPoints);
 };
 
 }//namespace cura

src/commandSocket.cpp

@@ -1,308 +1,202 @@
 #include "utils/logoutput.h"
 #include "commandSocket.h"
-#include "FffProcessor.h"
-#include "Progress.h"
+#include "fffProcessor.h"
 
 #include <thread>
 #include <cinttypes>
 
-#ifdef ARCUS
 #include <Arcus/Socket.h>
-#endif
-
-#include <string> // stoi
 
 #ifdef _WIN32
 #include <windows.h>
 #endif
 
-#define DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR(x) 
-// std::cerr << x;
-
 namespace cura {
 
 #define BYTES_PER_FLOAT 4
 #define FLOATS_PER_VECTOR 3
 #define VECTORS_PER_FACE 3
 
-#ifdef ARCUS
 class CommandSocket::Private
 {
 public:
     Private()
-        : socket(nullptr)
+        : processor(nullptr)
+        , socket(nullptr)
         , object_count(0)
-        , current_sliced_object(nullptr)
-        , sliced_objects(0)
-        , current_layer_count(0)
-        , current_layer_offset(0)
+        , current_object_number(0)
+        , currentSlicedObject(nullptr)
+        , slicedObjects(0)
     { }
 
-    cura::proto::Layer* getLayerById(int id);
+    Cura::Layer* getLayerById(int id);
+
+    fffProcessor* processor;
 
     Arcus::Socket* socket;
-    
-    // Number of objects that need to be sliced
+
     int object_count;
-    
-    // Message that holds a list of sliced objects
-    std::shared_ptr<cura::proto::SlicedObjectList> sliced_object_list;
-    
-    // Message that holds the currently sliced object (to be added to sliced_object_list)
-    cura::proto::SlicedObject* current_sliced_object;
-    
-    // Number of sliced objects for this sliced object list
-    int sliced_objects;
+    int current_object_number;
 
-    // Number of layers sent to the front end so far
-    // Used for incrementing the current layer in one at a time mode
-    int current_layer_count;
-    int current_layer_offset;
-    
-    // Ids of the sliced objects
-    std::vector<int64_t> object_ids;
+    std::shared_ptr<Cura::SlicedObjectList> slicedObjectList;
+    Cura::SlicedObject* currentSlicedObject;
+    int slicedObjects;
+    std::vector<int64_t> objectIds;
 
-    std::string temp_gcode_file;
+    std::string tempGCodeFile;
     std::ostringstream gcode_output_stream;
-    
-    // Print object that olds one or more meshes that need to be sliced. 
-    std::vector< std::shared_ptr<MeshGroup> > objects_to_slice;
-};
-#endif
 
-CommandSocket::CommandSocket()
-#ifdef ARCUS
+    std::shared_ptr<PrintObject> objectToSlice;
+};
+
+CommandSocket::CommandSocket(fffProcessor* processor)
     : d(new Private)
-#endif
 {
-#ifdef ARCUS
-    FffProcessor::getInstance()->setCommandSocket(this);
-#endif
+    d->processor = processor;
+    d->processor->setCommandSocket(this);
 }
 
 void CommandSocket::connect(const std::string& ip, int port)
 {
-#ifdef ARCUS
     d->socket = new Arcus::Socket();
-    //d->socket->registerMessageType(1, &Cura::ObjectList::default_instance());
-    d->socket->registerMessageType(1, &cura::proto::Slice::default_instance());
-    d->socket->registerMessageType(2, &cura::proto::SlicedObjectList::default_instance());
-    d->socket->registerMessageType(3, &cura::proto::Progress::default_instance());
-    d->socket->registerMessageType(4, &cura::proto::GCodeLayer::default_instance());
-    d->socket->registerMessageType(5, &cura::proto::ObjectPrintTime::default_instance());
-    d->socket->registerMessageType(6, &cura::proto::SettingList::default_instance());
-    d->socket->registerMessageType(7, &cura::proto::GCodePrefix::default_instance());
+    d->socket->registerMessageType(1, &Cura::ObjectList::default_instance());
+    d->socket->registerMessageType(2, &Cura::SlicedObjectList::default_instance());
+    d->socket->registerMessageType(3, &Cura::Progress::default_instance());
+    d->socket->registerMessageType(4, &Cura::GCodeLayer::default_instance());
+    d->socket->registerMessageType(5, &Cura::ObjectPrintTime::default_instance());
+    d->socket->registerMessageType(6, &Cura::SettingList::default_instance());
+    d->socket->registerMessageType(7, &Cura::GCodePrefix::default_instance());
 
     d->socket->connect(ip, port);
-    
-    bool slice_another_time = true;
-    
-    // Start & continue listening as long as socket is not closed and there is no error.
-    while(d->socket->state() != Arcus::SocketState::Closed && d->socket->state() != Arcus::SocketState::Error && slice_another_time)
+
+    while(d->socket->state() != Arcus::SocketState::Closed && d->socket->state() != Arcus::SocketState::Error)
     {
-        //If there is an object to slice, do so.
-        if(d->objects_to_slice.size())
+        if(d->objectToSlice)
         {
-            FffProcessor::getInstance()->resetFileNumber();
-            for(auto object : d->objects_to_slice)
-            {
-                if(!FffProcessor::getInstance()->processMeshGroup(object.get()))
-                {
-                    logError("Slicing mesh group failed!");
-                }
-            }
-            d->objects_to_slice.clear();
-            FffProcessor::getInstance()->finalize();
-            sendGCodeLayer();
-            sendPrintTime();
-            slice_another_time = false; // TODO: remove this when multiple slicing with CuraEngine is safe
             //TODO: Support all-at-once/one-at-a-time printing
-            //d->processor->processModel(d->object_to_slice.get());
-            //d->object_to_slice.reset();
-            //d->processor->resetFileNumber();
+            d->processor->processModel(d->objectToSlice.get());
+            d->objectToSlice.reset();
+            d->processor->resetFileNumber();
 
-            //sendPrintTime();
+            sendPrintTime();
         }
-        
-        // Actually start handling messages.
+
         Arcus::MessagePtr message = d->socket->takeNextMessage();
-        cura::proto::SettingList* setting_list = dynamic_cast<cura::proto::SettingList*>(message.get());
-        if(setting_list)
+
+        Cura::SettingList* settingList = dynamic_cast<Cura::SettingList*>(message.get());
+        if(settingList)
         {
-            handleSettingList(setting_list);
+            handleSettingList(settingList);
         }
 
-        /*cura::proto::ObjectList* object_list = dynamic_cast<cura::proto::ObjectList*>(message.get());
-        if(object_list)
+        Cura::ObjectList* objectList = dynamic_cast<Cura::ObjectList*>(message.get());
+        if(objectList)
         {
-            handleObjectList(object_list);
-        }*/
-        
-        cura::proto::Slice* slice = dynamic_cast<cura::proto::Slice*>(message.get());
-        if(slice)
-        {
-            // Reset object counts
-            d->object_count = 0;
-            d->object_ids.clear();
-            for(auto object : slice->object_lists())
-            {
-                handleObjectList(&object);
-            }
+            handleObjectList(objectList);
         }
 
         std::this_thread::sleep_for(std::chrono::milliseconds(250));
 
-        if(!d->socket->errorString().empty()) 
-        {
+        if(!d->socket->errorString().empty()) {
             logError("%s\n", d->socket->errorString().data());
             d->socket->clearError();
         }
     }
-#endif
 }
 
-#ifdef ARCUS
-void CommandSocket::handleObjectList(cura::proto::ObjectList* list)
+void CommandSocket::handleObjectList(Cura::ObjectList* list)
 {
     FMatrix3x3 matrix;
-    //d->object_count = 0;
-    //d->object_ids.clear();
-    d->objects_to_slice.push_back(std::make_shared<MeshGroup>(FffProcessor::getInstance()));
-    MeshGroup* meshgroup = d->objects_to_slice.back().get();
-    
-    for(auto setting : list->settings())
-    {
-        meshgroup->setSetting(setting.name(), setting.value());
-    }
-    
-    for (int extruder_nr = 0; extruder_nr < FffProcessor::getInstance()->getSettingAsCount("machine_extruder_count"); extruder_nr++)
-    { // initialize remaining extruder trains and load the defaults
-        meshgroup->createExtruderTrain(extruder_nr)->setExtruderTrainDefaults(extruder_nr); // create new extruder train objects or use already existing ones
-    }
-    
+    d->object_count = 0;
+    d->objectIds.clear();
+
+    d->objectToSlice = std::make_shared<PrintObject>(d->processor);
     for(auto object : list->objects())
     {
-        DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("solid Cura_out\n");
-        int extruder_train_nr = 0; // TODO: make primary extruder configurable!
-        for(auto setting : object.settings())
-        {
-            if (setting.name() == "extruder_nr")
-            {
-                extruder_train_nr = std::stoi(setting.value());
-                break;
-            }
-        }
-        SettingsBase* extruder_train = meshgroup->getExtruderTrain(extruder_train_nr);
+        d->objectToSlice->meshes.emplace_back(d->objectToSlice.get()); //Construct a new mesh and put it into printObject's mesh list.
+        Mesh& mesh = d->objectToSlice->meshes.back();
 
-        meshgroup->meshes.push_back(extruder_train); //Construct a new mesh (with the corresponding extruder train as settings parent object) and put it into MeshGroup's mesh list.
-        Mesh& mesh = meshgroup->meshes.back();
-
-        int bytes_per_face = BYTES_PER_FLOAT * FLOATS_PER_VECTOR * VECTORS_PER_FACE;
-        int face_count = object.vertices().size() / bytes_per_face;
-        for(int i = 0; i < face_count; ++i)
+        int bytesPerFace = BYTES_PER_FLOAT * FLOATS_PER_VECTOR * VECTORS_PER_FACE;
+        int faceCount = object.vertices().size() / bytesPerFace;
+        for(int i = 0; i < faceCount; ++i)
         {
             //TODO: Apply matrix
-            std::string data = object.vertices().substr(i * bytes_per_face, bytes_per_face);
-            const FPoint3* float_vertices = reinterpret_cast<const FPoint3*>(data.data());
+            std::string data = object.vertices().substr(i * bytesPerFace, bytesPerFace);
+            const FPoint3* floatVerts = reinterpret_cast<const FPoint3*>(data.data());
 
             Point3 verts[3];
-            verts[0] = matrix.apply(float_vertices[0]);
-            verts[1] = matrix.apply(float_vertices[1]);
-            verts[2] = matrix.apply(float_vertices[2]);
+            verts[0] = matrix.apply(floatVerts[0]);
+            verts[1] = matrix.apply(floatVerts[1]);
+            verts[2] = matrix.apply(floatVerts[2]);
             mesh.addFace(verts[0], verts[1], verts[2]);
-
-            DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("  facet normal -1 0 0\n");
-            DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("    outer loop\n");
-            DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("      vertex "<<INT2MM(verts[0].x) <<" " << INT2MM(verts[0].y) <<" " << INT2MM(verts[0].z) << "\n");
-            DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("      vertex "<<INT2MM(verts[1].x) <<" " << INT2MM(verts[1].y) <<" " << INT2MM(verts[1].z) << "\n");
-            DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("      vertex "<<INT2MM(verts[2].x) <<" " << INT2MM(verts[2].y) <<" " << INT2MM(verts[2].z) << "\n");
-            DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("    endloop\n");
-            DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("  endfacet\n");
         }
-        DEBUG_OUTPUT_OBJECT_STL_THROUGH_CERR("endsolid Cura_out\n");
+
         for(auto setting : object.settings())
         {
             mesh.setSetting(setting.name(), setting.value());
         }
 
-        d->object_ids.push_back(object.id());
+        d->objectIds.push_back(object.id());
         mesh.finish();
     }
-
     d->object_count++;
-    meshgroup->finalize();
+    d->objectToSlice->finalize();
 }
 
-void CommandSocket::handleSettingList(cura::proto::SettingList* list)
+void CommandSocket::handleSettingList(Cura::SettingList* list)
 {
     for(auto setting : list->settings())
     {
-        FffProcessor::getInstance()->setSetting(setting.name(), setting.value());
+        d->processor->setSetting(setting.name(), setting.value());
     }
 }
-#endif
 
 void CommandSocket::sendLayerInfo(int layer_nr, int32_t z, int32_t height)
 {
-#ifdef ARCUS
-    if(!d->current_sliced_object)
+    if(!d->currentSlicedObject)
     {
         return;
     }
-    
-    cura::proto::Layer* layer = d->getLayerById(layer_nr);
+
+    Cura::Layer* layer = d->getLayerById(layer_nr);
     layer->set_height(z);
     layer->set_thickness(height);
-#endif
 }
 
 void CommandSocket::sendPolygons(PolygonType type, int layer_nr, Polygons& polygons, int line_width)
 {
-#ifdef ARCUS
-    if(!d->current_sliced_object)
+    if(!d->currentSlicedObject)
         return;
     
     if (polygons.size() == 0)
         return;
 
-    cura::proto::Layer* layer = d->getLayerById(layer_nr);
+    Cura::Layer* layer = d->getLayerById(layer_nr);
 
     for(unsigned int i = 0; i < polygons.size(); ++i)
     {
-        cura::proto::Polygon* p = layer->add_polygons();
-        p->set_type(static_cast<cura::proto::Polygon_Type>(type));
+        Cura::Polygon* p = layer->add_polygons();
+        p->set_type(static_cast<Cura::Polygon_Type>(type));
         std::string polydata;
         polydata.append(reinterpret_cast<const char*>(polygons[i].data()), polygons[i].size() * sizeof(Point));
         p->set_points(polydata);
         p->set_line_width(line_width);
     }
-#endif
 }
 
 void CommandSocket::sendProgress(float amount)
 {
-#ifdef ARCUS
-    auto message = std::make_shared<cura::proto::Progress>();
-    amount /= d->object_count;
-    amount += d->sliced_objects * (1. / d->object_count);
+    auto message = std::make_shared<Cura::Progress>();
     message->set_amount(amount);
     d->socket->sendMessage(message);
-#endif
-}
-
-void CommandSocket::sendProgressStage(Progress::Stage stage)
-{
-    // TODO
 }
 
 void CommandSocket::sendPrintTime()
 {
-#ifdef ARCUS
-    auto message = std::make_shared<cura::proto::ObjectPrintTime>();
-    message->set_time(FffProcessor::getInstance()->getTotalPrintTime());
-    message->set_material_amount(FffProcessor::getInstance()->getTotalFilamentUsed(0));
+    auto message = std::make_shared<Cura::ObjectPrintTime>();
+    message->set_time(d->processor->getTotalPrintTime());
+    message->set_material_amount(d->processor->getTotalFilamentUsed(0));
     d->socket->sendMessage(message);
-#endif
 }
 
 void CommandSocket::sendPrintMaterialForObject(int index, int extruder_nr, float print_time)
@@ -316,88 +210,65 @@ void CommandSocket::sendPrintMaterialForObject(int index, int extruder_nr, float
 
 void CommandSocket::beginSendSlicedObject()
 {
-#ifdef ARCUS
-    if(!d->sliced_object_list)
+    if(!d->slicedObjectList)
     {
-        d->sliced_object_list = std::make_shared<cura::proto::SlicedObjectList>();
+        d->slicedObjectList = std::make_shared<Cura::SlicedObjectList>();
     }
 
-    d->current_sliced_object = d->sliced_object_list->add_objects();
-    d->current_sliced_object->set_id(d->object_ids[d->sliced_objects]);
-#endif
+    d->currentSlicedObject = d->slicedObjectList->add_objects();
+    d->currentSlicedObject->set_id(d->objectIds[d->slicedObjects]);
 }
 
 void CommandSocket::endSendSlicedObject()
 {
-#ifdef ARCUS
-    d->sliced_objects++;
-    d->current_layer_offset = d->current_layer_count;
-    std::cout << "End sliced object called. sliced objects " << d->sliced_objects << " object count: " << d->object_count << std::endl;
-
-    std::cout << "current layer count" << d->current_layer_count << std::endl;
-    std::cout << "current layer offset" << d->current_layer_offset << std::endl;
-
-    if(d->sliced_objects >= d->object_count)
+    d->slicedObjects++;
+    if(d->slicedObjects >= d->object_count)
     {
-        d->socket->sendMessage(d->sliced_object_list);
-        d->sliced_objects = 0;
-        d->current_layer_count = 0;
-        d->current_layer_offset = 0;
-        d->sliced_object_list.reset();
-        d->current_sliced_object = nullptr;
+        d->socket->sendMessage(d->slicedObjectList);
+        d->slicedObjects = 0;
+        d->slicedObjectList.reset();
+        d->currentSlicedObject = nullptr;
     }
-#endif
 }
 
 void CommandSocket::beginGCode()
 {
-#ifdef ARCUS
-    FffProcessor::getInstance()->setTargetStream(&d->gcode_output_stream);
-#endif
+    d->processor->setTargetStream(&d->gcode_output_stream);
 }
 
 void CommandSocket::sendGCodeLayer()
 {
-#ifdef ARCUS
-    auto message = std::make_shared<cura::proto::GCodeLayer>();
-    message->set_id(d->object_ids[0]);
+    auto message = std::make_shared<Cura::GCodeLayer>();
+    message->set_id(d->objectIds[0]);
     message->set_data(d->gcode_output_stream.str());
     d->socket->sendMessage(message);
     
     d->gcode_output_stream.str("");
-#endif
 }
 
 void CommandSocket::sendGCodePrefix(std::string prefix)
 {
-#ifdef ARCUS
-    auto message = std::make_shared<cura::proto::GCodePrefix>();
+    auto message = std::make_shared<Cura::GCodePrefix>();
     message->set_data(prefix);
     d->socket->sendMessage(message);
-#endif
 }
 
-#ifdef ARCUS
-cura::proto::Layer* CommandSocket::Private::getLayerById(int id)
+Cura::Layer* CommandSocket::Private::getLayerById(int id)
 {
-    id += current_layer_offset;
+    auto itr = std::find_if(currentSlicedObject->mutable_layers()->begin(), currentSlicedObject->mutable_layers()->end(), [id](Cura::Layer& l) { return l.id() == id; });
 
-    auto itr = std::find_if(current_sliced_object->mutable_layers()->begin(), current_sliced_object->mutable_layers()->end(), [id](cura::proto::Layer& l) { return l.id() == id; });
-
-    cura::proto::Layer* layer = nullptr;
-    if(itr != current_sliced_object->mutable_layers()->end())
+    Cura::Layer* layer = nullptr;
+    if(itr != currentSlicedObject->mutable_layers()->end())
     {
         layer = &(*itr);
     }
     else
     {
-        layer = current_sliced_object->add_layers();
+        layer = currentSlicedObject->add_layers();
         layer->set_id(id);
-        current_layer_count++;
     }
 
     return layer;
 }
-#endif
 
 }//namespace cura

src/commandSocket.h

@@ -4,71 +4,28 @@
 #include "utils/socket.h"
 #include "utils/polygon.h"
 #include "settings.h"
-#include "Progress.h"
 
 #include <memory>
 
-#ifdef ARCUS
 #include "Cura.pb.h"
-#endif
 
-namespace cura
-{
+namespace cura {
 
+class fffProcessor;
 class CommandSocket
 {
 public:
-    CommandSocket();
-    /*!
-     * Connect with the GUI
-     * This creates and initialises the arcus socket and then continues listening for messages. 
-     * \param ip string containing the ip to connect with
-     * \param port int of the port to connect with.
-     */
+    CommandSocket(fffProcessor* processor);
+
     void connect(const std::string& ip, int port);
 
-#ifdef ARCUS
-    /*! 
-     * Handler for ObjectList message. 
-     * Loads all objects from the message and starts the slicing process
-     */
-    void handleObjectList(cura::proto::ObjectList* list);
+    void handleObjectList(Cura::ObjectList* list);
+    void handleSettingList(Cura::SettingList* list);
     
-    /*! 
-     * Handler for SettingList message. 
-     * This simply sets all the settings by using key value pair
-     */
-    void handleSettingList(cura::proto::SettingList* list);
-#endif
-    
-    /*!
-     * Does nothing at the moment 
-     */
     void sendLayerInfo(int layer_nr, int32_t z, int32_t height);
-    
-    /*! 
-     * Send a polygon to the engine. This is used for the layerview in the GUI
-     */
     void sendPolygons(cura::PolygonType type, int layer_nr, cura::Polygons& polygons, int line_width);
-    
-    /*! 
-     * Send progress to GUI
-     */
     void sendProgress(float amount);
-    
-    /*!
-     * Send the current stage of the process to the GUI (starting, slicing infill, etc) 
-     */
-    void sendProgressStage(Progress::Stage stage);
-    
-    /*!
-     * Send time estimate of how long print would take.
-     */
     void sendPrintTime();
-    
-    /*!
-     * Does nothing at the moment
-     */
     void sendPrintMaterialForObject(int index, int extruder_nr, float material_amount);
 
     void beginSendSlicedObject();
@@ -78,11 +35,9 @@ public:
     void sendGCodeLayer();
     void sendGCodePrefix(std::string prefix);
 
-#ifdef ARCUS
 private:
     class Private;
     const std::unique_ptr<Private> d;
-#endif
 };
 
 }//namespace cura

src/debug.h

@@ -14,7 +14,7 @@
 
 #define DEBUG 1
 
-#define DEBUG_SHOW_LINE 1
+#define DEBUG_SHOW_LINE 0
 
 #if DEBUG_SHOW_LINE == 1
 #define DEBUG_FILE_LINE __FILE_NAME__ << "." << __LINE__ << ": "

src/gcodeExport.cpp

@@ -1,7 +1,6 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
 #include <stdarg.h>
 #include <iomanip>
-#include <cmath>
 
 #include "gcodeExport.h"
 #include "utils/logoutput.h"
@@ -9,74 +8,72 @@
 namespace cura {
 
 GCodeExport::GCodeExport()
-: output_stream(&std::cout)
-, currentPosition(0,0,MM2INT(20))
-, commandSocket(nullptr)
-, layer_nr(0)
+: output_stream(&std::cout), currentPosition(0,0,0), startPosition(INT32_MIN,INT32_MIN,0)
 {
-    current_e_value = 0;
+    extrusion_amount = 0;
+    retraction_extrusion_window = 0.0;
+    extruderSwitchRetraction = 14.5;
     current_extruder = 0;
     currentFanSpeed = -1;
     
     totalPrintTime = 0.0;
+    for(unsigned int e=0; e<MAX_EXTRUDERS; e++)
+    {
+        totalFilament[e] = 0.0;
+        currentTemperature[e] = 0;
+        filament_diameter[e] = 0;
+    }
     
     currentSpeed = 1;
-    isZHopped = 0;
-    setFlavor(EGCodeFlavor::REPRAP);
+    retractionPrimeSpeed = 1;
+    isRetracted = false;
+    isZHopped = false;
+    setFlavor(GCODE_FLAVOR_REPRAP);
+    memset(extruderOffset, 0, sizeof(extruderOffset));
 }
 
 GCodeExport::~GCodeExport()
 {
 }
 
-void GCodeExport::setCommandSocketAndLayerNr(CommandSocket* commandSocket_, unsigned int layer_nr_) {
-    commandSocket = commandSocket_;
-    layer_nr = layer_nr_;
-}
-
 void GCodeExport::setOutputStream(std::ostream* stream)
 {
     output_stream = stream;
     *output_stream << std::fixed;
 }
 
+void GCodeExport::setExtruderOffset(int id, Point p)
+{
+    extruderOffset[id] = p;
+}
+
 Point GCodeExport::getExtruderOffset(int id)
 {
-    return extruder_attr[id].nozzle_offset;
+    return extruderOffset[id];
 }
 
-Point GCodeExport::getGcodePos(int64_t x, int64_t y, int extruder_train)
+void GCodeExport::setSwitchExtruderCode(int id, std::string preSwitchExtruderCode, std::string postSwitchExtruderCode)
 {
-    if (use_extruder_offset_to_offset_coords) { return Point(x,y) - getExtruderOffset(extruder_train); }
-    else { return Point(x,y); }
+    this->preSwitchExtruderCode[id] = preSwitchExtruderCode;
+    this->postSwitchExtruderCode[id] = postSwitchExtruderCode;
 }
 
-
 void GCodeExport::setFlavor(EGCodeFlavor flavor)
 {
     this->flavor = flavor;
-    if (flavor == EGCodeFlavor::MACH3)
+    if (flavor == GCODE_FLAVOR_MACH3)
         for(int n=0; n<MAX_EXTRUDERS; n++)
-            extruder_attr[n].extruderCharacter = 'A' + n;
+            extruderCharacter[n] = 'A' + n;
     else
         for(int n=0; n<MAX_EXTRUDERS; n++)
-            extruder_attr[n].extruderCharacter = 'E';
-    if (flavor == EGCodeFlavor::ULTIGCODE || flavor == EGCodeFlavor::REPRAP_VOLUMATRIC)
+            extruderCharacter[n] = 'E';
+    if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
     {
         is_volumatric = true;
-    }
-    else
-    {
-        is_volumatric = false;
-    }
-
-    if (flavor == EGCodeFlavor::BFB || flavor == EGCodeFlavor::REPRAP_VOLUMATRIC || flavor == EGCodeFlavor::ULTIGCODE)
-    {
-        firmware_retract = true;
-    }
+    } 
     else 
     {
-        firmware_retract = false;
+        is_volumatric = false;
     }
 }
 
@@ -85,6 +82,15 @@ EGCodeFlavor GCodeExport::getFlavor()
     return this->flavor;
 }
 
+void GCodeExport::setRetractionSettings(int extruderSwitchRetraction, int extruderSwitchRetractionSpeed, int extruderSwitchPrimeSpeed, int retraction_extrusion_window, int retraction_count_max)
+{
+    this->extruderSwitchRetraction = INT2MM(extruderSwitchRetraction);
+    this->extruderSwitchRetractionSpeed = extruderSwitchRetractionSpeed;
+    this->extruderSwitchPrimeSpeed = extruderSwitchPrimeSpeed;
+    this->retraction_extrusion_window = INT2MM(retraction_extrusion_window);
+    this->retraction_count_max = retraction_count_max;
+}
+
 void GCodeExport::setZ(int z)
 {
     this->zPos = z;
@@ -104,33 +110,43 @@ int GCodeExport::getPositionZ()
     return currentPosition.z;
 }
 
+void GCodeExport::resetStartPosition()
+{
+    startPosition.x = INT32_MIN;
+    startPosition.y = INT32_MIN;
+}
+
+Point GCodeExport::getStartPositionXY()
+{
+    return Point(startPosition.x, startPosition.y);
+}
+
 int GCodeExport::getExtruderNr()
 {
     return current_extruder;
 }
 
-void GCodeExport::setFilamentDiameter(unsigned int extruder, int diameter)
+double GCodeExport::getFilamentArea(unsigned int extruder)
 {
-    double r = INT2MM(diameter) / 2.0;
-    double area = M_PI * r * r;
-    extruder_attr[extruder].filament_area = area;
+    double r = INT2MM(filament_diameter[extruder]) / 2.0;
+    double filament_area = M_PI * r * r;
+    return filament_area;
 }
 
-double GCodeExport::getCurrentExtrudedVolume()
+void GCodeExport::setFilamentDiameter(unsigned int n, int diameter)
+{
+    filament_diameter[n] = diameter;
+}
+
+double GCodeExport::getExtrusionAmountMM3(unsigned int extruder)
 {
-    double extrusion_amount = current_e_value;
-    if (!firmware_retract)
-    { // no E values are changed to perform a retraction
-        extrusion_amount -= extruder_attr[current_extruder].retraction_e_amount_at_e_start; // subtract the increment in E which was used for the first unretraction instead of extrusion
-        extrusion_amount += extruder_attr[current_extruder].retraction_e_amount_current; // add the decrement in E which the filament is behind on extrusion due to the last retraction
-    }
     if (is_volumatric)
     {
         return extrusion_amount;
     }
     else
     {
-        return extrusion_amount * extruder_attr[current_extruder].filament_area;
+        return extrusion_amount * getFilamentArea(extruder);
     }
 }
 
@@ -138,8 +154,8 @@ double GCodeExport::getCurrentExtrudedVolume()
 double GCodeExport::getTotalFilamentUsed(int e)
 {
     if (e == current_extruder)
-        return extruder_attr[e].totalFilament + getCurrentExtrudedVolume();
-    return extruder_attr[e].totalFilament;
+        return totalFilament[e] + getExtrusionAmountMM3(e);
+    return totalFilament[e];
 }
 
 double GCodeExport::getTotalPrintTime()
@@ -152,10 +168,10 @@ void GCodeExport::resetTotalPrintTimeAndFilament()
     totalPrintTime = 0;
     for(unsigned int e=0; e<MAX_EXTRUDERS; e++)
     {
-        extruder_attr[e].totalFilament = 0.0;
-        extruder_attr[e].currentTemperature = 0;
+        totalFilament[e] = 0.0;
+        currentTemperature[e] = 0;
     }
-    current_e_value = 0.0;
+    extrusion_amount = 0.0;
     estimateCalculator.reset();
 }
 
@@ -167,17 +183,7 @@ void GCodeExport::updateTotalPrintTime()
 
 void GCodeExport::writeComment(std::string comment)
 {
-    *output_stream << ";";
-    for (unsigned int i = 0; i < comment.length(); i++)
-    {
-        if (comment[i] == '\n')
-        {
-            *output_stream << "\\n";
-        }else{
-            *output_stream << comment[i];
-        }
-    }
-    *output_stream << "\n";
+    *output_stream << ";" << comment << "\n";
 }
 
 void GCodeExport::writeTypeComment(const char* type)
@@ -189,11 +195,6 @@ void GCodeExport::writeLayerComment(int layer_nr)
     *output_stream << ";LAYER:" << layer_nr << "\n";
 }
 
-void GCodeExport::writeLayerCountComment(int layer_count)
-{
-    *output_stream << ";LAYER_COUNT:" << layer_count << "\n";
-}
-
 void GCodeExport::writeLine(const char* line)
 {
     *output_stream << line << "\n";
@@ -201,337 +202,206 @@ void GCodeExport::writeLine(const char* line)
 
 void GCodeExport::resetExtrusionValue()
 {
-    if (current_e_value != 0.0 && flavor != EGCodeFlavor::MAKERBOT && flavor != EGCodeFlavor::BFB)
+    if (extrusion_amount != 0.0 && flavor != GCODE_FLAVOR_MAKERBOT && flavor != GCODE_FLAVOR_BFB)
     {
-        *output_stream << "G92 " << extruder_attr[current_extruder].extruderCharacter << "0\n";
-        double current_extruded_volume = getCurrentExtrudedVolume();
-        extruder_attr[current_extruder].totalFilament += current_extruded_volume;
-        for (double& extruded_volume_at_retraction : extruder_attr[current_extruder].extruded_volume_at_previous_n_retractions)
-        { // update the extruded_volume_at_previous_n_retractions only of the current extruder, since other extruders don't extrude the current volume
-            extruded_volume_at_retraction -= current_extruded_volume;
-        }
-        current_e_value = 0.0;
-        extruder_attr[current_extruder].retraction_e_amount_at_e_start = extruder_attr[current_extruder].retraction_e_amount_current;
+        *output_stream << "G92 " << extruderCharacter[current_extruder] << "0\n";
+        totalFilament[current_extruder] += getExtrusionAmountMM3(current_extruder);
+        for (unsigned int i = 0; i < extrusion_amount_at_previous_n_retractions.size(); i++)
+            extrusion_amount_at_previous_n_retractions[i] -= extrusion_amount;
+        extrusion_amount = 0.0;
     }
 }
 
 void GCodeExport::writeDelay(double timeAmount)
 {
     *output_stream << "G4 P" << int(timeAmount * 1000) << "\n";
-    estimateCalculator.addTime(timeAmount);
+    totalPrintTime += timeAmount;
 }
 
-void GCodeExport::writeMove(Point p, double speed, double extrusion_mm3_per_mm)
+void GCodeExport::writeMove(Point p, int speed, double extrusion_mm3_per_mm)
 {
     writeMove(p.X, p.Y, zPos, speed, extrusion_mm3_per_mm);
 }
 
-void GCodeExport::writeMove(Point3 p, double speed, double extrusion_mm3_per_mm)
+void GCodeExport::writeMove(Point3 p, int speed, double extrusion_mm3_per_mm)
 {
     writeMove(p.x, p.y, p.z, speed, extrusion_mm3_per_mm);
 }
-
-void GCodeExport::writeMoveBFB(int x, int y, int z, double speed, double extrusion_mm3_per_mm)
-{
-    double extrusion_per_mm = extrusion_mm3_per_mm;
-    if (!is_volumatric)
-    {
-        extrusion_per_mm = extrusion_mm3_per_mm / extruder_attr[current_extruder].filament_area;
-    }
-    
-    Point gcode_pos = getGcodePos(x,y, current_extruder);
-    
-    //For Bits From Bytes machines, we need to handle this completely differently. As they do not use E values but RPM values.
-    float fspeed = speed * 60;
-    float rpm = extrusion_per_mm * speed * 60;
-    const float mm_per_rpm = 4.0; //All BFB machines have 4mm per RPM extrusion.
-    rpm /= mm_per_rpm;
-    if (rpm > 0)
-    {
-        if (extruder_attr[current_extruder].retraction_e_amount_current)
-        {
-            if (currentSpeed != double(rpm))
-            {
-                //fprintf(f, "; %f e-per-mm %d mm-width %d mm/s\n", extrusion_per_mm, lineWidth, speed);
-                //fprintf(f, "M108 S%0.1f\r\n", rpm);
-                *output_stream << "M108 S" << std::setprecision(1) << rpm << "\r\n";
-                currentSpeed = double(rpm);
-            }
-            //Add M101 or M201 to enable the proper extruder.
-            *output_stream << "M" << int((current_extruder + 1) * 100 + 1) << "\r\n";
-            extruder_attr[current_extruder].retraction_e_amount_current = 0.0;
-        }
-        //Fix the speed by the actual RPM we are asking, because of rounding errors we cannot get all RPM values, but we have a lot more resolution in the feedrate value.
-        // (Trick copied from KISSlicer, thanks Jonathan)
-        fspeed *= (rpm / (roundf(rpm * 100) / 100));
-
-        //Increase the extrusion amount to calculate the amount of filament used.
-        Point3 diff = Point3(x,y,z) - getPosition();
-        
-        current_e_value += extrusion_per_mm * diff.vSizeMM();
-    }
-    else
-    {
-        //If we are not extruding, check if we still need to disable the extruder. This causes a retraction due to auto-retraction.
-        if (!extruder_attr[current_extruder].retraction_e_amount_current)
-        {
-            *output_stream << "M103\r\n";
-            extruder_attr[current_extruder].retraction_e_amount_current = 1.0; // 1.0 used as stub; BFB doesn't use the actual retraction amount; it performs retraction on the firmware automatically
-        }
-    }
-    *output_stream << std::setprecision(3) << 
-        "G1 X" << INT2MM(gcode_pos.X) << 
-        " Y" << INT2MM(gcode_pos.Y) << 
-        " Z" << INT2MM(z) << std::setprecision(1) << " F" << fspeed << "\r\n";
-    
-    currentPosition = Point3(x, y, z);
-    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), current_e_value), speed);
-}
-
-void GCodeExport::writeMove(int x, int y, int z, double speed, double extrusion_mm3_per_mm)
+void GCodeExport::writeMove(int x, int y, int z, int speed, double extrusion_mm3_per_mm)
 {
     if (currentPosition.x == x && currentPosition.y == y && currentPosition.z == z)
         return;
-
-#ifdef ASSERT_INSANE_OUTPUT
-    assert(speed < 200 && speed > 1); // normal F values occurring in UM2 gcode (this code should not be compiled for release)
-    assert(currentPosition != no_point3);
-    assert((Point3(x,y,z) - currentPosition).vSize() < MM2INT(300)); // no crazy positions (this code should not be compiled for release)
-#endif //ASSERT_INSANE_OUTPUT
-
-    if (extrusion_mm3_per_mm < 0)
-        logWarning("Warning! Negative extrusion move!");
-
-    if (flavor == EGCodeFlavor::BFB)
-    {
-        writeMoveBFB(x, y, z, speed, extrusion_mm3_per_mm);
-        return;
-    }
-
+    
     double extrusion_per_mm = extrusion_mm3_per_mm;
     if (!is_volumatric)
     {
-        extrusion_per_mm = extrusion_mm3_per_mm / extruder_attr[current_extruder].filament_area;
+        extrusion_per_mm = extrusion_mm3_per_mm / getFilamentArea(current_extruder);
     }
 
-    Point gcode_pos = getGcodePos(x,y, current_extruder);
-
-    if (extrusion_mm3_per_mm > 0.000001)
+    if (flavor == GCODE_FLAVOR_BFB)
     {
-        Point3 diff = Point3(x,y,z) - getPosition();
-        if (isZHopped > 0)
+        //For Bits From Bytes machines, we need to handle this completely differently. As they do not use E values but RPM values.
+        float fspeed = speed * 60;
+        float rpm = extrusion_per_mm * speed * 60;
+        const float mm_per_rpm = 4.0; //All BFB machines have 4mm per RPM extrusion.
+        rpm /= mm_per_rpm;
+        if (rpm > 0)
         {
-            *output_stream << std::setprecision(3) << "G1 Z" << INT2MM(currentPosition.z) << "\n";
-            isZHopped = 0;
-        }
-        double prime_volume = extruder_attr[current_extruder].prime_volume;
-        current_e_value += (is_volumatric) ? prime_volume : prime_volume / extruder_attr[current_extruder].filament_area;   
-        if (extruder_attr[current_extruder].retraction_e_amount_current)
-        {
-            if (firmware_retract)
-            { // note that BFB is handled differently
-                *output_stream << "G11\n";
-                //Assume default UM2 retraction settings.
-                if (prime_volume > 0)
+            if (isRetracted)
+            {
+                if (currentSpeed != int(rpm * 10))
                 {
-                    *output_stream << "G1 F" << (extruder_attr[current_extruder].last_retraction_prime_speed * 60) << " " << extruder_attr[current_extruder].extruderCharacter << std::setprecision(5) << current_e_value << "\n";
-                    currentSpeed = extruder_attr[current_extruder].last_retraction_prime_speed;
+                    //fprintf(f, "; %f e-per-mm %d mm-width %d mm/s\n", extrusion_per_mm, lineWidth, speed);
+                    //fprintf(f, "M108 S%0.1f\r\n", rpm);
+                    *output_stream << "M108 S" << std::setprecision(1) << rpm << "\r\n";
+                    currentSpeed = int(rpm * 10);
                 }
-                estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), current_e_value), 25.0);
+                //Add M101 or M201 to enable the proper extruder.
+                *output_stream << "M" << int((current_extruder + 1) * 100 + 1) << "\r\n";
+                isRetracted = false;
             }
-            else
-            {
-                current_e_value += extruder_attr[current_extruder].retraction_e_amount_current;
-                *output_stream << "G1 F" << (extruder_attr[current_extruder].last_retraction_prime_speed * 60) << " " << extruder_attr[current_extruder].extruderCharacter << std::setprecision(5) << current_e_value << "\n";
-                currentSpeed = extruder_attr[current_extruder].last_retraction_prime_speed;
-                estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), current_e_value), currentSpeed);
-            }
-            if (getCurrentExtrudedVolume() > 10000.0) //According to https://github.com/Ultimaker/CuraEngine/issues/14 having more then 21m of extrusion causes inaccuracies. So reset it every 10m, just to be sure.
-            {
-                resetExtrusionValue();
-            }
-            extruder_attr[current_extruder].retraction_e_amount_current = 0.0;
-        }
-        else if (prime_volume > 0.0)
-        {
-            current_e_value += prime_volume;
-            *output_stream << "G1 F" << (extruder_attr[current_extruder].last_retraction_prime_speed * 60) << " " << extruder_attr[current_extruder].extruderCharacter << std::setprecision(5) << current_e_value << "\n";
-            currentSpeed = extruder_attr[current_extruder].last_retraction_prime_speed;
-            estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), current_e_value), currentSpeed);
-        }
-        extruder_attr[current_extruder].prime_volume = 0.0;
-        current_e_value += extrusion_per_mm * diff.vSizeMM();
-        *output_stream << "G1";
-    }
-    else
-    {
-        *output_stream << "G0";
-                
-        if (commandSocket) 
-        {
-            // we should send this travel as a non-retraction move
-            cura::Polygons travelPoly;
-            PolygonRef travel = travelPoly.newPoly();
-            travel.add(Point(currentPosition.x, currentPosition.y));
-            travel.add(Point(x, y));
-            commandSocket->sendPolygons(extruder_attr[current_extruder].retraction_e_amount_current ? MoveRetractionType : MoveCombingType, layer_nr, travelPoly, extruder_attr[current_extruder].retraction_e_amount_current ? MM2INT(0.2) : MM2INT(0.1));
-        }                    
-    }
+            //Fix the speed by the actual RPM we are asking, because of rounding errors we cannot get all RPM values, but we have a lot more resolution in the feedrate value.
+            // (Trick copied from KISSlicer, thanks Jonathan)
+            fspeed *= (rpm / (roundf(rpm * 100) / 100));
 
-    if (currentSpeed != speed)
-    {
-        *output_stream << " F" << (speed * 60);
-        currentSpeed = speed;
-    }
+            //Increase the extrusion amount to calculate the amount of filament used.
+            Point3 diff = Point3(x,y,z) - getPosition();
+            
+            extrusion_amount += extrusion_per_mm * diff.vSizeMM();
+        }else{
+            //If we are not extruding, check if we still need to disable the extruder. This causes a retraction due to auto-retraction.
+            if (!isRetracted)
+            {
+                *output_stream << "M103\r\n";
+                isRetracted = true;
+            }
+        }
+        *output_stream << std::setprecision(3) << "G1 X" << INT2MM(x - extruderOffset[current_extruder].X) << " Y" << INT2MM(y - extruderOffset[current_extruder].Y) << " Z" << INT2MM(z) << std::setprecision(1) << " F" << fspeed << "\r\n";
+    }else{
+        //Normal E handling.
+        if (extrusion_mm3_per_mm > 0.000001)
+        {
+            Point3 diff = Point3(x,y,z) - getPosition();
+            if (isZHopped > 0)
+            {
+                *output_stream << std::setprecision(3) << "G1 Z" << INT2MM(currentPosition.z) << "\n";
+                isZHopped = false;
+            }
+            if (isRetracted)
+            {
+                if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
+                {
+                    *output_stream << "G11\n";
+                    //Assume default UM2 retraction settings.
+                    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount), 25.0);
+                }else{
+                    *output_stream << "G1 F" << (retractionPrimeSpeed * 60) << " " << extruderCharacter[current_extruder] << std::setprecision(5) << extrusion_amount << "\n";
+                    currentSpeed = retractionPrimeSpeed;
+                    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount), currentSpeed);
+                }
+                if (getExtrusionAmountMM3(current_extruder) > 10000.0) //According to https://github.com/Ultimaker/CuraEngine/issues/14 having more then 21m of extrusion causes inaccuracies. So reset it every 10m, just to be sure.
+                    resetExtrusionValue();
+                isRetracted = false;
+            }
+            extrusion_amount += extrusion_per_mm * diff.vSizeMM();
+            *output_stream << "G1";
+        }else{
+            *output_stream << "G0";
+        }
 
-    *output_stream << std::setprecision(3) << 
-        " X" << INT2MM(gcode_pos.X) << 
-        " Y" << INT2MM(gcode_pos.Y);
-    if (z != currentPosition.z + isZHopped)
-        *output_stream << " Z" << INT2MM(z + isZHopped);
-    if (extrusion_mm3_per_mm > 0.000001)
-        *output_stream << " " << extruder_attr[current_extruder].extruderCharacter << std::setprecision(5) << current_e_value;
-    *output_stream << "\n";
+        if (currentSpeed != speed)
+        {
+            *output_stream << " F" << (speed * 60);
+            currentSpeed = speed;
+        }
+
+        *output_stream << std::setprecision(3) << " X" << INT2MM(x - extruderOffset[current_extruder].X) << " Y" << INT2MM(y - extruderOffset[current_extruder].Y);
+        if (z != currentPosition.z)
+            *output_stream << " Z" << INT2MM(z);
+        if (extrusion_mm3_per_mm > 0.000001)
+            *output_stream << " " << extruderCharacter[current_extruder] << std::setprecision(5) << extrusion_amount;
+        *output_stream << "\n";
+    }
     
     currentPosition = Point3(x, y, z);
-    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), current_e_value), speed);
+    startPosition = currentPosition;
+    estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount), speed);
 }
 
 void GCodeExport::writeRetraction(RetractionConfig* config, bool force)
 {
-    if (flavor == EGCodeFlavor::BFB)//BitsFromBytes does automatic retraction.
-    {
+    if (flavor == GCODE_FLAVOR_BFB)//BitsFromBytes does automatic retraction.
         return;
-    }
-    if (extruder_attr[current_extruder].retraction_e_amount_current == config->distance * ((is_volumatric)? extruder_attr[current_extruder].filament_area : 1.0))
-    {
+    if (isRetracted)
         return;
-    }
-    if (config->distance <= 0)
-    {
+    if (config->amount <= 0)
+        return;
+    
+    if (!force && retraction_count_max > 0 && int(extrusion_amount_at_previous_n_retractions.size()) == retraction_count_max - 1 
+        && extrusion_amount < extrusion_amount_at_previous_n_retractions.back() + retraction_extrusion_window) 
         return;
-    }
 
-    { // handle retraction limitation
-        double current_extruded_volume = getCurrentExtrudedVolume();
-        std::deque<double>& extruded_volume_at_previous_n_retractions = extruder_attr[current_extruder].extruded_volume_at_previous_n_retractions;
-        while (int(extruded_volume_at_previous_n_retractions.size()) >= config->retraction_count_max && !extruded_volume_at_previous_n_retractions.empty()) 
-        {
-            // extruder switch could have introduced data which falls outside the retraction window
-            // also the retraction_count_max could have changed between the last retraction and this
-            extruded_volume_at_previous_n_retractions.pop_back();
-        }
-        if (!force && config->retraction_count_max <= 0)
-        {
-            return;
-        }
-        if (!force && int(extruded_volume_at_previous_n_retractions.size()) == config->retraction_count_max - 1 
-            && current_extruded_volume < extruded_volume_at_previous_n_retractions.back() + config->retraction_extrusion_window * extruder_attr[current_extruder].filament_area) 
-        {
-            return;
-        }
-        extruded_volume_at_previous_n_retractions.push_front(current_extruded_volume);
-        if (int(extruded_volume_at_previous_n_retractions.size()) == config->retraction_count_max) 
-        {
-            extruded_volume_at_previous_n_retractions.pop_back();
-        }
-    }
+    if (config->primeAmount > 0)
+        extrusion_amount += config->primeAmount;
+    retractionPrimeSpeed = config->primeSpeed;
     
-    extruder_attr[current_extruder].last_retraction_prime_speed = config->primeSpeed;
-    
-    double retraction_e_amount = config->distance * ((is_volumatric)? extruder_attr[current_extruder].filament_area : 1.0);
-    if (firmware_retract)
+    if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
     {
         *output_stream << "G10\n";
         //Assume default UM2 retraction settings.
-        estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), current_e_value - retraction_e_amount), 25); // TODO: hardcoded values!
-    }
-    else
-    {
-        current_e_value -= retraction_e_amount;
-        *output_stream << "G1 F" << (config->speed * 60) << " " << extruder_attr[current_extruder].extruderCharacter << std::setprecision(5) << current_e_value << "\n";
+        double retraction_distance = 4.5;
+        estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount - retraction_distance), 25); // TODO: hardcoded values!
+    }else{
+        *output_stream << "G1 F" << (config->speed * 60) << " " << extruderCharacter[current_extruder] << std::setprecision(5) << extrusion_amount - config->amount << "\n";
         currentSpeed = config->speed;
-        estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), current_e_value), currentSpeed);
+        estimateCalculator.plan(TimeEstimateCalculator::Position(INT2MM(currentPosition.x), INT2MM(currentPosition.y), INT2MM(currentPosition.z), extrusion_amount - config->amount), currentSpeed);
     }
-
-    extruder_attr[current_extruder].retraction_e_amount_current = retraction_e_amount ;
-    extruder_attr[current_extruder].prime_volume += config->prime_volume;
-    
     if (config->zHop > 0)
     {
-        isZHopped = config->zHop;
-        *output_stream << std::setprecision(3) << "G1 Z" << INT2MM(currentPosition.z + isZHopped) << "\n";
+        *output_stream << std::setprecision(3) << "G1 Z" << INT2MM(currentPosition.z + config->zHop) << "\n";
+        isZHopped = true;
     }
+    extrusion_amount_at_previous_n_retractions.push_front(extrusion_amount);
+    if (int(extrusion_amount_at_previous_n_retractions.size()) == retraction_count_max)
+    {
+        extrusion_amount_at_previous_n_retractions.pop_back();
+    }
+    isRetracted = true;
 }
 
-void GCodeExport::writeRetraction_extruderSwitch()
+void GCodeExport::switchExtruder(int newExtruder)
 {
-    if (flavor == EGCodeFlavor::BFB)
+    if (current_extruder == newExtruder)
+        return;
+    
+    if (flavor == GCODE_FLAVOR_BFB)
     {
-        if (!extruder_attr[current_extruder].retraction_e_amount_current)
+        if (!isRetracted)
             *output_stream << "M103\r\n";
 
-        extruder_attr[current_extruder].retraction_e_amount_current = 1.0; // 1.0 is a stub; BFB doesn't use the actual retracted amount; retraction is performed by firmware
+        isRetracted = true;
         return;
     }
-
-    double retraction_e_amount = extruder_attr[current_extruder].extruder_switch_retraction_distance * ((is_volumatric)? extruder_attr[current_extruder].filament_area : 1.0);
-    if (extruder_attr[current_extruder].retraction_e_amount_current == retraction_e_amount)
-    {
-        return; 
-    }
-
-    double current_extruded_volume = getCurrentExtrudedVolume();
-    std::deque<double>& extruded_volume_at_previous_n_retractions = extruder_attr[current_extruder].extruded_volume_at_previous_n_retractions;
-    extruded_volume_at_previous_n_retractions.push_front(current_extruded_volume);
-
-    if (firmware_retract)
-    {
-        if (extruder_attr[current_extruder].retraction_e_amount_current) 
-        {
-            return; 
-        }
-        *output_stream << "G10 S1\n";
-    }
-    else
-    {
-        current_e_value -= retraction_e_amount;
-        *output_stream << "G1 F" << (extruder_attr[current_extruder].extruderSwitchRetractionSpeed * 60) << " " 
-            << extruder_attr[current_extruder].extruderCharacter << std::setprecision(5) << current_e_value << "\n";
-            // the E value of the extruder switch retraction 'overwrites' the E value of the normal retraction
-        currentSpeed = extruder_attr[current_extruder].extruderSwitchRetractionSpeed;
-        extruder_attr[current_extruder].last_retraction_prime_speed = extruder_attr[current_extruder].extruderSwitchPrimeSpeed;
-    }
-    extruder_attr[current_extruder].retraction_e_amount_current = retraction_e_amount; // suppose that for UM2 the retraction amount in the firmware is equal to the provided amount
-}
-
-void GCodeExport::switchExtruder(int new_extruder)
-{
-    if (current_extruder == new_extruder)
-        return;
-
-    writeRetraction_extruderSwitch();
-
-    resetExtrusionValue(); // should be called on the old extruder
-
-    int old_extruder = current_extruder;
-    current_extruder = new_extruder;
-
-    if (flavor == EGCodeFlavor::MACH3)
-    {
-        resetExtrusionValue(); // also zero the E value on the new extruder
-    }
     
-    writeCode(extruder_attr[old_extruder].end_code.c_str());
-    if (flavor == EGCodeFlavor::MAKERBOT)
+    resetExtrusionValue();
+    if (flavor == GCODE_FLAVOR_ULTIGCODE || flavor == GCODE_FLAVOR_REPRAP_VOLUMATRIC)
     {
+        *output_stream << "G10 S1\n";
+    }else{
+        *output_stream << "G1 F" << (extruderSwitchRetractionSpeed * 60) << " " << extruderCharacter[current_extruder] << std::setprecision(5) << (extrusion_amount - extruderSwitchRetraction) << "\n";
+        currentSpeed = extruderSwitchRetractionSpeed;
+    }
+
+    current_extruder = newExtruder;
+    if (flavor == GCODE_FLAVOR_MACH3)
+        resetExtrusionValue();
+    isRetracted = true;
+    writeCode(preSwitchExtruderCode[current_extruder].c_str());
+    if (flavor == GCODE_FLAVOR_MAKERBOT)
         *output_stream << "M135 T" << current_extruder << "\n";
-    }
     else
-    {
         *output_stream << "T" << current_extruder << "\n";
-    }
-    writeCode(extruder_attr[new_extruder].start_code.c_str());
+    writeCode(postSwitchExtruderCode[current_extruder].c_str());
     
     //Change the Z position so it gets re-writting again. We do not know if the switch code modified the Z position.
     currentPosition.z += 1;
@@ -540,26 +410,26 @@ void GCodeExport::switchExtruder(int new_extruder)
 void GCodeExport::writeCode(const char* str)
 {
     *output_stream << str;
-    if (flavor == EGCodeFlavor::BFB)
+    if (flavor == GCODE_FLAVOR_BFB)
         *output_stream << "\r\n";
     else
         *output_stream << "\n";
 }
 
-void GCodeExport::writeFanCommand(double speed)
+void GCodeExport::writeFanCommand(int speed)
 {
     if (currentFanSpeed == speed)
         return;
     if (speed > 0)
     {
-        if (flavor == EGCodeFlavor::MAKERBOT)
+        if (flavor == GCODE_FLAVOR_MAKERBOT)
             *output_stream << "M126 T0\n"; //value = speed * 255 / 100 // Makerbot cannot set fan speed...;
         else
             *output_stream << "M106 S" << (speed * 255 / 100) << "\n";
     }
     else
     {
-        if (flavor == EGCodeFlavor::MAKERBOT)
+        if (flavor == GCODE_FLAVOR_MAKERBOT)
             *output_stream << "M127 T0\n";
         else
             *output_stream << "M107\n";
@@ -567,9 +437,9 @@ void GCodeExport::writeFanCommand(double speed)
     currentFanSpeed = speed;
 }
 
-void GCodeExport::writeTemperatureCommand(int extruder, double temperature, bool wait)
+void GCodeExport::writeTemperatureCommand(int extruder, int temperature, bool wait)
 {
-    if (!wait && extruder_attr[extruder].currentTemperature == temperature)
+    if (!wait && currentTemperature[extruder] == temperature)
         return;
     
     if (wait)
@@ -579,10 +449,10 @@ void GCodeExport::writeTemperatureCommand(int extruder, double temperature, bool
     if (extruder != current_extruder)
         *output_stream << " T" << extruder;
     *output_stream << " S" << temperature << "\n";
-    extruder_attr[extruder].currentTemperature = temperature;
+    currentTemperature[extruder] = temperature;
 }
 
-void GCodeExport::writeBedTemperatureCommand(double temperature, bool wait)
+void GCodeExport::writeBedTemperatureCommand(int temperature, bool wait)
 {
     if (wait)
         *output_stream << "M190 S";
@@ -591,9 +461,12 @@ void GCodeExport::writeBedTemperatureCommand(double temperature, bool wait)
     *output_stream << temperature << "\n";
 }
 
-void GCodeExport::finalize(double moveSpeed, const char* endCode)
+void GCodeExport::finalize(int maxObjectHeight, int moveSpeed, const char* endCode)
 {
+    std::cerr << "maxObjectHeight : " << maxObjectHeight << std::endl;
     writeFanCommand(0);
+    setZ(maxObjectHeight + 5000);
+    writeMove(Point3(0,0,maxObjectHeight + 5000) + getPositionXY(), moveSpeed, 0);
     writeCode(endCode);
     log("Print time: %d\n", int(getTotalPrintTime()));
     log("Filament: %d\n", int(getTotalFilamentUsed(0)));
@@ -604,4 +477,3 @@ void GCodeExport::finalize(double moveSpeed, const char* endCode)
 }
 
 }//namespace cura
-

src/gcodeExport.h

@@ -4,122 +4,83 @@
 
 #include <stdio.h>
 #include <deque> // for extrusionAmountAtPreviousRetractions
-#include <sstream> // for stream.str()
 
 #include "settings.h"
 #include "utils/intpoint.h"
-#include "utils/NoCopy.h"
 #include "timeEstimate.h"
-#include "MeshGroup.h"
-#include "commandSocket.h"
 
 namespace cura {
 
-struct CoastingConfig
-{
-    bool coasting_enable; 
-    double coasting_volume_move; 
-    double coasting_speed_move; 
-    double coasting_min_volume_move; 
-
-    double coasting_volume_retract;
-    double coasting_speed_retract;
-    double coasting_min_volume_retract;
-};
-    
 class RetractionConfig
 {
 public:
-    double distance; //!< The distance retracted (in mm)
-    double speed; //!< The speed with which to retract (in mm/s)
-    double primeSpeed; //!< the speed with which to unretract (in mm/s)
-    double prime_volume; //!< the amount of material primed after unretracting (in mm^3)
-    int zHop; //!< the amount with which to lift the head during a retraction-travel
-    int retraction_min_travel_distance; //!< 
-    double retraction_extrusion_window; //!< in mm
-    int retraction_count_max;
+    double amount; //!< The amount
+    int speed;
+    int primeSpeed;
+    double primeAmount;
+    int zHop;
 };
 
 //The GCodePathConfig is the configuration for moves/extrusion actions. This defines at which width the line is printed and at which speed.
 class GCodePathConfig
 {
 private:
-    double speed_base; //!< movement speed (mm/s) specific to this print feature
-    double speed_current; //!< current movement speed (mm/s) (modified by layer_nr etc.)
-    int line_width; //!< width of the line extruded
-    double flow; //!< extrusion flow in %
-    int layer_thickness; //!< layer height
-    double extrusion_mm3_per_mm;//!< mm^3 filament moved per mm line extruded
+    int speed;
+    int line_width;
+    int flow;
+    int layer_thickness;
+    double extrusion_mm3_per_mm;
 public:
-    const char* name; //!< name of the feature type
+    const char* name;
     bool spiralize;
-    RetractionConfig *const retraction_config;
+    RetractionConfig* retraction_config;
     
-    // GCodePathConfig() : speed(0), line_width(0), extrusion_mm3_per_mm(0.0), name(nullptr), spiralize(false), retraction_config(nullptr) {}
-    GCodePathConfig(RetractionConfig* retraction_config, const char* name) : speed_base(0), speed_current(0), line_width(0), extrusion_mm3_per_mm(0.0), name(name), spiralize(false), retraction_config(retraction_config) {}
+    GCodePathConfig() : speed(0), line_width(0), extrusion_mm3_per_mm(0.0), name(nullptr), spiralize(false), retraction_config(nullptr) {}
+    GCodePathConfig(RetractionConfig* retraction_config, const char* name) : speed(0), line_width(0), extrusion_mm3_per_mm(0.0), name(name), spiralize(false), retraction_config(retraction_config) {}
     
-    /*!
-     * Initialize some of the member variables.
-     * 
-     * Warning! setLayerHeight still has to be called before this object can be used.
-     */
-    void init(double speed, int line_width, double flow)
+    void setSpeed(int speed)
     {
-        speed_base = speed;
-        this->speed_current = speed;
-        this->line_width = line_width;
-        this->flow = flow;
+        this->speed = speed;
     }
-
-    /*!
-     * Set the layer height and (re)compute the extrusion_per_mm
-     */
+    
+    void setLineWidth(int line_width)
+    {
+        this->line_width = line_width;
+        calculateExtrusion();
+    }
+    
     void setLayerHeight(int layer_height)
     {
         this->layer_thickness = layer_height;
         calculateExtrusion();
     }
     
-    /*!
-     * Set the speed to somewhere between the @p min_speed and the speed_iconic.
-     * 
-     * This functions should not be called with @p layer_nr > @p max_speed_layer !
-     * 
-     * \param min_speed The speed at layer zero
-     * \param layer_nr The layer number 
-     * \param max_speed_layer The layer number for which the speed_iconic should be used.
-     */
-    void smoothSpeed(double min_speed, int layer_nr, double max_speed_layer) 
+    void setFlow(int flow)
     {
-        speed_current = (speed_base*layer_nr)/max_speed_layer + (min_speed*(max_speed_layer-layer_nr)/max_speed_layer);
+        this->flow = flow;
+        calculateExtrusion();
     }
-
-    /*!
-     * Can only be called after the layer height has been set (which is done while writing the gcode!)
-     */
+    
+    void smoothSpeed(int min_speed, int layer_nr, int max_speed_layer)
+    {
+        speed = (speed*layer_nr)/max_speed_layer + (min_speed*(max_speed_layer-layer_nr)/max_speed_layer);
+    }
+    
     double getExtrusionMM3perMM()
     {
         return extrusion_mm3_per_mm;
     }
     
-    /*!
-     * Get the movement speed in mm/s
-     */
-    double getSpeed()
+    int getSpeed()
     {
-        return speed_current;
+        return speed;
     }
     
     int getLineWidth()
     {
         return line_width;
     }
-    
-    bool isTravelPath()
-    {
-        return line_width == 0;
-    }
-    
+
 private:
     void calculateExtrusion()
     {
@@ -129,106 +90,73 @@ private:
 
 //The GCodeExport class writes the actual GCode. This is the only class that knows how GCode looks and feels.
 //  Any customizations on GCodes flavors are done in this class.
-class GCodeExport : public NoCopy
+class GCodeExport
 {
 private:
-    struct ExtruderTrainAttributes
-    {
-        Point nozzle_offset;
-        char extruderCharacter;
-        std::string start_code;
-        std::string end_code;
-        double filament_area; //!< in mm^2 for non-volumetric, cylindrical filament
-
-        double extruder_switch_retraction_distance; //<! extruder switch retraction distance in mm
-        int extruderSwitchRetractionSpeed; //!< extruder switch retraction speed in mm/s
-        int extruderSwitchPrimeSpeed; //!< prime speed of extruder switch in mm/s
-
-        double totalFilament; //!< total filament used per extruder in mm^3
-        int currentTemperature;
-
-        double retraction_e_amount_current; //!< The current retracted amount (in mm or mm^3), or zero(i.e. false) if it is not currently retracted (positive values mean retracted amount, so negative impact on E values)
-        double retraction_e_amount_at_e_start; //!< The ExtruderTrainAttributes::retraction_amount_current value at E0, i.e. the offset (in mm or mm^3) from E0 to the situation where the filament is at the tip of the nozzle.
-
-        double prime_volume; //!< Amount of material (in mm^3) to be primed after an unretration (due to oozing and/or coasting)
-        double last_retraction_prime_speed; //!< The last prime speed (in mm/s) of the to-be-primed amount
-
-        std::deque<double> extruded_volume_at_previous_n_retractions; // in mm^3
-
-        ExtruderTrainAttributes()
-        : nozzle_offset(0,0)
-        , extruderCharacter(0)
-        , start_code("")
-        , end_code("")
-        , filament_area(0)
-        , extruder_switch_retraction_distance(0.0)
-        , extruderSwitchRetractionSpeed(0)
-        , extruderSwitchPrimeSpeed(0)
-        , totalFilament(0)
-        , currentTemperature(0)
-        , retraction_e_amount_current(0.0)
-        , retraction_e_amount_at_e_start(0.0)
-        , prime_volume(0.0)
-        , last_retraction_prime_speed(1.0)
-        { }
-    };
-    ExtruderTrainAttributes extruder_attr[MAX_EXTRUDERS];
-    bool use_extruder_offset_to_offset_coords;
-    
     std::ostream* output_stream;
-    double current_e_value; //!< The last E value written to gcode (in mm or mm^3)
+    double extrusion_amount; // in mm or mm^3
+    double extruderSwitchRetraction;
+    int extruderSwitchRetractionSpeed;
+    int extruderSwitchPrimeSpeed;
+    double retraction_extrusion_window;
+    int retraction_count_max;
+    std::deque<double> extrusion_amount_at_previous_n_retractions; // in mm or mm^3
     Point3 currentPosition;
-    double currentSpeed; //!< The current speed (F values / 60) in mm/s
-    int zPos; // TODO: why is this different from currentPosition.z ? zPos is set every layer, while currentPosition.z is set every move. However, the z position is generally not changed within a layer!
-    int isZHopped; //!< The amount by which the print head is currently z hopped, or zero if it is not z hopped. (A z hop is used during travel moves to avoid collision with other layer parts)
-
+    Point3 startPosition;
+    Point extruderOffset[MAX_EXTRUDERS];
+    char extruderCharacter[MAX_EXTRUDERS];
+    int currentTemperature[MAX_EXTRUDERS];
+    int currentSpeed;
+    int zPos;
+    bool isRetracted;
+    bool isZHopped;
+    int retractionPrimeSpeed;
     int current_extruder;
     int currentFanSpeed;
     EGCodeFlavor flavor;
-
+    std::string preSwitchExtruderCode[MAX_EXTRUDERS];
+    std::string postSwitchExtruderCode[MAX_EXTRUDERS];
+    
+    double totalFilament[MAX_EXTRUDERS]; // in mm^3
+    double filament_diameter[MAX_EXTRUDERS]; // in mm^3
     double totalPrintTime;
     TimeEstimateCalculator estimateCalculator;
     
     bool is_volumatric;
-    bool firmware_retract; //!< whether retractions are done in the firmware, or hardcoded in E values.
-    
-    CommandSocket* commandSocket; //!< for sending travel data
-    unsigned int layer_nr; //!< for sending travel data
-    
 public:
     
     GCodeExport();
     ~GCodeExport();
     
-    void setCommandSocketAndLayerNr(CommandSocket* commandSocket, unsigned int layer_nr);
-    
     void setOutputStream(std::ostream* stream);
     
+    void setExtruderOffset(int id, Point p);
     Point getExtruderOffset(int id);
-    
-    Point getGcodePos(int64_t x, int64_t y, int extruder_train);
+    void setSwitchExtruderCode(int id, std::string preSwitchExtruderCode, std::string postSwitchExtruderCode);
     
     void setFlavor(EGCodeFlavor flavor);
     EGCodeFlavor getFlavor();
+        
+    void setRetractionSettings(int extruderSwitchRetraction, int extruderSwitchRetractionSpeed, int extruderSwitchPrimeSpeed, int minimalExtrusionBeforeRetraction, int retraction_count_max);
     
     void setZ(int z);
     
-    void addLastCoastedVolume(double last_coasted_volume) 
-    {
-        extruder_attr[current_extruder].prime_volume += last_coasted_volume; 
-    }
-    
     Point3 getPosition();
     
     Point getPositionXY();
+    
+    void resetStartPosition();
+
+    Point getStartPositionXY();
 
     int getPositionZ();
 
     int getExtruderNr();
     
     void setFilamentDiameter(unsigned int n, int diameter);
+    double getFilamentArea(unsigned int extruder);
     
-    double getCurrentExtrudedVolume();
+    double getExtrusionAmountMM3(unsigned int extruder);
     
     double getTotalFilamentUsed(int e);
 
@@ -239,64 +167,31 @@ public:
     void writeComment(std::string comment);
     void writeTypeComment(const char* type);
     void writeLayerComment(int layer_nr);
-    void writeLayerCountComment(int layer_count);
     
     void writeLine(const char* line);
     
-    /*!
-     * Reset the current_e_value to prevent too high E values.
-     * 
-     * The current extruded volume is added to the current extruder_attr.
-     */
     void resetExtrusionValue();
     
     void writeDelay(double timeAmount);
     
-    void writeMove(Point p, double speed, double extrusion_per_mm);
+    void writeMove(Point p, int speed, double extrusion_per_mm);
     
-    void writeMove(Point3 p, double speed, double extrusion_per_mm);
+    void writeMove(Point3 p, int speed, double extrusion_per_mm);
 private:
-    void writeMove(int x, int y, int z, double speed, double extrusion_per_mm);
-    /*!
-     * The writeMove when flavor == BFB
-     */
-    void writeMoveBFB(int x, int y, int z, double speed, double extrusion_per_mm);
+    void writeMove(int x, int y, int z, int speed, double extrusion_per_mm);
 public:
     void writeRetraction(RetractionConfig* config, bool force=false);
     
-    void writeRetraction_extruderSwitch();
-    
     void switchExtruder(int newExtruder);
     
     void writeCode(const char* str);
     
-    void writeFanCommand(double speed);
+    void writeFanCommand(int speed);
     
-    void writeTemperatureCommand(int extruder, double temperature, bool wait = false);
-    void writeBedTemperatureCommand(double temperature, bool wait = false);
-    
-    void preSetup(MeshGroup* settings)
-    {
-        for(int n=0; n<settings->getSettingAsCount("machine_extruder_count"); n++)
-        {
-            ExtruderTrain* train = settings->getExtruderTrain(n);
-            setFilamentDiameter(n, train->getSettingInMicrons("material_diameter")); 
-            
-            extruder_attr[n].nozzle_offset = Point(train->getSettingInMicrons("machine_nozzle_offset_x"), train->getSettingInMicrons("machine_nozzle_offset_y"));
-            
-            extruder_attr[n].start_code = train->getSettingString("machine_extruder_start_code");
-            extruder_attr[n].end_code = train->getSettingString("machine_extruder_end_code");
-            
-            extruder_attr[n].extruder_switch_retraction_distance = INT2MM(train->getSettingInMicrons("switch_extruder_retraction_amount")); 
-            extruder_attr[n].extruderSwitchRetractionSpeed = train->getSettingInMillimetersPerSecond("switch_extruder_retraction_speed");
-            extruder_attr[n].extruderSwitchPrimeSpeed = train->getSettingInMillimetersPerSecond("switch_extruder_prime_speed");
-        }
-
-        setFlavor(settings->getSettingAsGCodeFlavor("machine_gcode_flavor"));
-        use_extruder_offset_to_offset_coords = settings->getSettingBoolean("machine_use_extruder_offset_to_offset_coords");
-    }
-    void finalize(double moveSpeed, const char* endCode);
+    void writeTemperatureCommand(int extruder, int temperature, bool wait = false);
+    void writeBedTemperatureCommand(int temperature, bool wait = false);
     
+    void finalize(int maxObjectHeight, int moveSpeed, const char* endCode);
 };
 
 }

src/gcodePlanner.h

@@ -7,494 +7,118 @@
 #include "comb.h"
 #include "utils/polygon.h"
 #include "utils/logoutput.h"
-#include "wallOverlap.h"
-#include "commandSocket.h"
-#include "FanSpeedLayerTime.h"
-
 
 namespace cura 
 {
 
-class SliceDataStorage;
-
-/*!
- * A gcode command to insert before a specific path.
- * 
- * Currently only used for preheat commands
- */
-struct NozzleTempInsert
-{
-    const unsigned int path_idx; //!< The path before which to insert this command
-    double time_after_path_start; //!< The time after the start of the path, before which to insert the command // TODO: use this to insert command in between moves in a path!
-    int extruder; //!< The extruder for which to set the temp
-    double temperature; //!< The temperature of the temperature command to insert
-    bool wait; //!< Whether to wait for the temperature to be reached
-    NozzleTempInsert(unsigned int path_idx, int extruder, double temperature, bool wait, double time_after_path_start = 0.0)
-    : path_idx(path_idx)
-    , time_after_path_start(time_after_path_start)
-    , extruder(extruder)
-    , temperature(temperature)
-    , wait(wait)
-    {}
-    
-    /*!
-     * Write the temperature command at the current position in the gcode.
-     * \param gcode The actual gcode writer
-     */
-    void write(GCodeExport& gcode)
-    {
-        gcode.writeTemperatureCommand(extruder, temperature, wait);
-    }
-};
-
-class GCodePlanner; // forward declaration so that TimeMaterialEstimates can be a friend
-
-/*!
- * Time and material estimates for a portion of paths, e.g. layer, extruder plan, path.
- */
-class TimeMaterialEstimates
-{
-    friend class GCodePlanner;
-private:
-    double extrude_time; //!< in seconds
-    double unretracted_travel_time; //!< in seconds 
-    double retracted_travel_time; //!< in seconds
-    double material; //!< in mm^3
-public:
-    
-    TimeMaterialEstimates(double extrude_time, double unretracted_travel_time, double retracted_travel_time, double material)
-    : extrude_time(extrude_time)
-    , unretracted_travel_time(unretracted_travel_time)
-    , retracted_travel_time(retracted_travel_time)
-    , material(material)
-    {
-    }
-    TimeMaterialEstimates()
-    : extrude_time(0.0)
-    , unretracted_travel_time(0.0)
-    , retracted_travel_time(0.0)
-    , material(0.0)
-    {
-    }
-    
-    /*!
-     * Set all estimates to zero.
-     */
-    void reset() 
-    {
-        extrude_time = 0.0;
-        unretracted_travel_time = 0.0;
-        retracted_travel_time = 0.0;
-        material = 0.0;
-    }
-    
-    TimeMaterialEstimates operator+(const TimeMaterialEstimates& other)
-    {
-        return TimeMaterialEstimates(extrude_time+other.extrude_time, unretracted_travel_time+other.unretracted_travel_time, retracted_travel_time+other.retracted_travel_time, material+other.material);
-    }
-    
-    TimeMaterialEstimates& operator+=(const TimeMaterialEstimates& other)
-    {
-        extrude_time += other.extrude_time;
-        unretracted_travel_time += other.unretracted_travel_time;
-        retracted_travel_time += other.retracted_travel_time;
-        material += other.material;
-        return *this;
-    }
-    
-    /*!
-     * \brief Subtracts the specified estimates from these estimates and returns
-     * the result.
-     * 
-     * Each of the estimates in this class are individually subtracted.
-     * 
-     * \param other The estimates to subtract from these estimates.
-     * \return These estimates with the specified estimates subtracted.
-     */
-    TimeMaterialEstimates operator-(const TimeMaterialEstimates& other);
-    
-    /*!
-     * \brief Subtracts the specified elements from these estimates.
-     * 
-     * This causes the estimates in this instance to change. Each of the
-     * estimates in this class are individually subtracted.
-     * 
-     * \param other The estimates to subtract from these estimates.
-     * \return A reference to this instance.
-     */
-    TimeMaterialEstimates& operator-=(const TimeMaterialEstimates& other);
-    
-    double getTotalTime() const
-    {
-        return extrude_time + unretracted_travel_time + retracted_travel_time;
-    }
-    double getTotalUnretractedTime() const
-    {
-        return extrude_time + unretracted_travel_time;
-    }
-    double getTravelTime() const
-    {
-        return retracted_travel_time + unretracted_travel_time;
-    }
-    double getExtrudeTime() const
-    {
-        return extrude_time;
-    }
-    double getMaterial() const
-    {
-        return material;
-    }
-};
-
 class GCodePath
 {
 public:
-    GCodePathConfig* config; //!< The configuration settings of the path.
-    float flow; //!< A type-independent flow configuration (used for wall overlap compensation)
-    bool retract; //!< Whether the path is a move path preceded by a retraction move; whether the path is a retracted move path. 
-    std::vector<Point> points; //!< The points constituting this path.
-    bool done;//!< Path is finished, no more moves should be added, and a new path should be started instead of any appending done to this one.
-    
-    TimeMaterialEstimates estimates; //!< Naive time and material estimates
-    
-    bool isTravelPath()
-    {
-        return config->isTravelPath();
-    }
-    
-    /*!
-     * Can only be called after the layer height has been set (which is done while writing the gcode!)
-     */
-    double getExtrusionMM3perMM()
-    {
-        return flow * config->getExtrusionMM3perMM();
-    }
+    GCodePathConfig* config;
+    bool retract;
+    int extruder;
+    std::vector<Point> points;
+    bool done;//Path is finished, no more moves should be added, and a new path should be started instead of any appending done to this one.
 };
 
-class ExtruderPlan
+//The GCodePlanner class stores multiple moves that are planned.
+// It facilitates the combing to keep the head inside the print.
+// It also keeps track of the print time estimate for this planning so speed adjustments can be made for the minimal-layer-time.
+class GCodePlanner
 {
-public:
-    std::vector<GCodePath> paths;
-    std::list<NozzleTempInsert> inserts;
-    
-    int extruder; //!< The extruder used for this paths in the current plan.
-    double required_temp;
-    
-    TimeMaterialEstimates estimates;
-    
-    ExtruderPlan(int extruder)
-    : extruder(extruder)
-    , required_temp(-1)
-    {
-    }
-        
-    /*!
-     * Add a new Insert, constructed with the given arguments
-     */
-    template<typename... Args>
-    void insertCommand(Args&&... contructor_args)
-    {
-        inserts.emplace_back(contructor_args...);
-    }
-    
-    /*!
-     * Insert the inserts into gcode which should be inserted before @p path_idx
-     */
-    void handleInserts(unsigned int& path_idx, GCodeExport& gcode)
-    {            
-        while ( ! inserts.empty() && path_idx >= inserts.front().path_idx)
-        { // handle the Insert to be inserted before this path_idx (and all inserts not handled yet)
-            inserts.front().write(gcode);
-            inserts.pop_front();
-        }
-    }
-    
-    /*!
-     * Insert all remaining temp inserts into gcode, to be called at the end of an extruder plan
-     */
-    void handleAllRemainingInserts(GCodeExport& gcode)
-    { 
-        while ( ! inserts.empty() )
-        { // handle the Insert to be inserted before this path_idx (and all inserts not handled yet)
-            NozzleTempInsert& insert = inserts.front();
-            assert(insert.path_idx == paths.size());
-            insert.write(gcode);
-            inserts.pop_front();
-        }
-    }
-};
-
-class LayerPlanBuffer; // forward declaration to prevent circular dependency
-/*! 
- * The GCodePlanner class stores multiple moves that are planned.
- * It facilitates the combing to keep the head inside the print.
- * It also keeps track of the print time estimate for this planning so speed adjustments can be made for the minimal-layer-time.
- */
-class GCodePlanner : public NoCopy
-{
-    friend class LayerPlanBuffer;
 private:
-    SliceDataStorage& storage;
+    GCodeExport& gcode;
 
-    CommandSocket* commandSocket;
-    
-    int layer_nr;
-    
-    int z; 
-    
-    int layer_thickness;
-    
-    Point start_position;
     Point lastPosition;
-    
-    std::vector<ExtruderPlan> extruder_plans; //!< should always contain at least one ExtruderPlan
-    
-    bool was_inside; //!< Whether the last planned (extrusion) move was inside a layer part
-    bool is_inside; //!< Whether the destination of the next planned travel move is inside a layer part
-    Polygons comb_boundary_inside; //!< The boundary within which to comb, or to move into when performing a retraction.
+    std::vector<GCodePath> paths;
     Comb* comb;
 
-    RetractionConfig* last_retraction_config;
-    
-    FanSpeedLayerTimeSettings& fan_speed_layer_time_settings;
-
-    double extrudeSpeedFactor;
-    double travelSpeedFactor;
-    
-    double fan_speed;
-    
+    GCodePathConfig travelConfig;
+    int extrudeSpeedFactor;
+    int travelSpeedFactor;
+    int currentExtruder;
+    int retractionMinimalDistance;
+    bool forceRetraction;
+    bool alwaysRetract;
     double extraTime;
     double totalPrintTime;
     
 private:
-    /*!
-     * Either create a new path with the given config or return the last path if it already had that config.
-     * If GCodePlanner::forceNewPathStart has been called a new path will always be returned.
-     * 
-     * \param config The config used for the path returned
-     * \param flow (optional) A ratio for the extrusion speed
-     * \return A path with the given config which is now the last path in GCodePlanner::paths
-     */
-    GCodePath* getLatestPathWithConfig(GCodePathConfig* config, float flow = 1.0);
-    
-    /*!
-     * Force GCodePlanner::getLatestPathWithConfig to return a new path.
-     * 
-     * This function is introduced because in some cases 
-     * GCodePlanner::getLatestPathWithConfig is called consecutively with the same config pointer, 
-     * though the content of the config has changed.
-     * 
-     * Example cases: 
-     * - when changing extruder, the same travel config is used, but its extruder field is changed.
-     */
+    GCodePath* getLatestPathWithConfig(GCodePathConfig* config);
     void forceNewPathStart();
 public:
-    /*!
-     * 
-     * \param travel_avoid_other_parts Whether to avoid other layer parts when travaeling through air.
-     * \param travel_avoid_distance The distance by which to avoid other layer parts when traveling through air.
-     * \param last_position The position of the head at the start of this gcode layer
-     */
-    GCodePlanner(CommandSocket* commandSocket, SliceDataStorage& storage, unsigned int layer_nr, int z, int layer_height, Point last_position, int current_extruder, FanSpeedLayerTimeSettings& fan_speed_layer_time_settings, bool retraction_combing, int64_t comb_boundary_offset, bool travel_avoid_other_parts, int64_t travel_avoid_distance);
+    GCodePlanner(GCodeExport& gcode, RetractionConfig* retraction_config, int travelSpeed, int retractionMinimalDistance);
     ~GCodePlanner();
 
-private:
-    /*!
-     * Compute the boundary within which to comb, or to move into when performing a retraction.
-     * \return the comb_boundary_inside
-     */
-    Polygons computeCombBoundaryInside();
-
-public:
-    int getLayerNr()
+    bool setExtruder(int extruder)
     {
-        return layer_nr;
-    }
-    
-    Point getLastPosition()
-    {
-        return lastPosition;
+        if (extruder == currentExtruder)
+            return false;
+        currentExtruder = extruder;
+        return true;
     }
 
-    /*!
-    * Set whether the next destination is inside a layer part or not.
-    * 
-    * Features like infill, walls, skin etc. are considered inside.
-    * Features like prime tower and support are considered outside.
-    */
-    void setIsInside(bool going_to_comb);
-    
-    bool setExtruder(int extruder);
-
-    /*!
-     * Get the last planned extruder.
-     */
     int getExtruder()
     {
-        return extruder_plans.back().extruder;
+        return currentExtruder;
     }
 
-    void setExtrudeSpeedFactor(double speedFactor)
+    void setCombBoundary(Polygons* polygons)
     {
+        if (comb)
+            delete comb;
+        if (polygons)
+            comb = new Comb(*polygons);
+        else
+            comb = nullptr;
+    }
+
+    void setAlwaysRetract(bool alwaysRetract)
+    {
+        this->alwaysRetract = alwaysRetract;
+    }
+
+    void forceRetract()
+    {
+        forceRetraction = true;
+    }
+
+    void setExtrudeSpeedFactor(int speedFactor)
+    {
+        if (speedFactor < 1) speedFactor = 1;
         this->extrudeSpeedFactor = speedFactor;
     }
-    double getExtrudeSpeedFactor()
+    int getExtrudeSpeedFactor()
     {
         return this->extrudeSpeedFactor;
     }
-    void setTravelSpeedFactor(double speedFactor)
+    void setTravelSpeedFactor(int speedFactor)
     {
-        if (speedFactor < 1) speedFactor = 1.0;
+        if (speedFactor < 1) speedFactor = 1;
         this->travelSpeedFactor = speedFactor;
     }
-    double getTravelSpeedFactor()
+    int getTravelSpeedFactor()
     {
         return this->travelSpeedFactor;
     }
-    
-    void setFanSpeed(double _fan_speed)
-    {
-        fan_speed = _fan_speed;
-    }
-    
-    /*!
-     * Add a travel path to a certain point, retract if needed and when avoiding boundary crossings:
-     * avoiding obstacles and comb along the boundary of parts.
-     * 
-     * \param p The point to travel to
-     */
+
     void addTravel(Point p);
-    
-    /*!
-     * Add a travel path to a certain point and retract if needed.
-     * 
-     * No combing is performed.
-     * 
-     * \param p The point to travel to
-     * \param path (optional) The travel path to which to add the point \p p
-     */
-    void addTravel_simple(Point p, GCodePath* path = nullptr);
-    
-    void addExtrusionMove(Point p, GCodePathConfig* config, float flow = 1.0);
 
-    void addPolygon(PolygonRef polygon, int startIdx, GCodePathConfig* config, WallOverlapComputation* wall_overlap_computation = nullptr);
+    void addExtrusionMove(Point p, GCodePathConfig* config);
 
-    void addPolygonsByOptimizer(Polygons& polygons, GCodePathConfig* config, WallOverlapComputation* wall_overlap_computation = nullptr, EZSeamType z_seam_type = EZSeamType::SHORTEST);
-
-    /*!
-     * Add lines to the gcode with optimized order.
-     * \param polygons The lines
-     * \param config The config of the lines
-     * \param wipe_dist (optional) the distance wiped without extruding after laying down a line.
-     */
-    void addLinesByOptimizer(Polygons& polygons, GCodePathConfig* config, int wipe_dist = 0);
-
-    /*!
-     * Compute naive time estimates (without accountign for slow down at corners etc.) and naive material estimates (without accounting for MergeInfillLines)
-     * and store them in each ExtruderPlan and each GCodePath.
-     * 
-     * \return the total estimates of this layer
-     */
-    TimeMaterialEstimates computeNaiveTimeEstimates();
-    
-    void forceMinimalLayerTime(double minTime, double minimalSpeed, double travelTime, double extrusionTime);
-    
-    /*!
-     * Write the planned paths to gcode
-     * 
-     * \param gcode The gcode to write the planned paths to
-     */
-    void writeGCode(GCodeExport& gcode, bool liftHeadIfNeeded, int layerThickness);
-    
-    /*!
-     * Complete all GcodePathConfig s by 
-     * - altering speed to conform to speed_layer_0
-     * - setting the layer_height (and thereby computing the extrusionMM3perMM)
-     */
-    void completeConfigs();
-    
-    /*!
-     * Interpolate between the initial layer speeds and the eventual speeds.
-     */
-    void processInitialLayersSpeedup();
-    
-    /*!
-     * Whether the current retracted path is to be an extruder switch retraction.
-     * This function is used to avoid a G10 S1 after a G10.
-     * 
-     * \param gcode The gcode to write the planned paths to
-     * \param extruder_plan_idx The index of the current extruder plan
-     * \param path_idx The index of the current retracted path 
-     * \return Whether the path should be an extgruder switch retracted path
-     */
-    bool makeRetractSwitchRetract(GCodeExport& gcode, unsigned int extruder_plan_idx, unsigned int path_idx);
-    
-    /*!
-     * Writes a path to GCode and performs coasting, or returns false if it did nothing.
-     * 
-     * Coasting replaces the last piece of an extruded path by move commands and uses the oozed material to lay down lines.
-     * 
-     * \param gcode The gcode to write the planned paths to
-     * \param extruder_plan_idx The index of the current extruder plan
-     * \param path_idx The index into GCodePlanner::paths for the next path to be written to GCode.
-     * \param layerThickness The height of the current layer.
-     * \param coasting_volume_move The volume otherwise leaked during a normal move.
-     * \param coasting_speed_move The speed at which to move during move-coasting.
-     * \param coasting_min_volume_move The minimal volume a path should have which builds up enough pressure to ooze as much as \p coasting_volume_move.
-     * \param coasting_volume_retract The volume otherwise leaked during a retract move.
-     * \param coasting_speed_retract The speed at which to move during retract-coasting.
-     * \param coasting_min_volume_retract The minimal volume a path should have which builds up enough pressure to ooze as much as \p coasting_volume_retract.
-     * \return Whether any GCode has been written for the path.
-     */
-    bool writePathWithCoasting(GCodeExport& gcode, unsigned int extruder_plan_idx, unsigned int path_idx, int64_t layerThickness, double coasting_volume_move, double coasting_speed_move, double coasting_min_volume_move, double coasting_volume_retract, double coasting_speed_retract, double coasting_min_volume_retract);
-
-    /*!
-     * Writes a path to GCode and performs coasting, or returns false if it did nothing.
-     * 
-     * Coasting replaces the last piece of an extruded path by move commands and uses the oozed material to lay down lines.
-     * 
-     * Paths shorter than \p coasting_min_volume will use less \p coasting_volume linearly.
-     * 
-     * \param gcode The gcode to write the planned paths to
-     * \param path The extrusion path to be written to GCode.
-     * \param path_next The next travel path to be written to GCode.
-     * \param layerThickness The height of the current layer.
-     * \param coasting_volume The volume otherwise leaked.
-     * \param coasting_speed The speed at which to move during coasting.
-     * \param coasting_min_volume The minimal volume a path should have which builds up enough pressure to ooze as much as \p coasting_volume.
-     * \param extruder_switch_retract (optional) For a coasted path followed by a retraction: whether to retract normally, or do an extruder switch retraction.
-     * \return Whether any GCode has been written for the path.
-     */
-    bool writePathWithCoasting(GCodeExport& gcode, GCodePath& path, GCodePath& path_next, int64_t layerThickness, double coasting_volume, double coasting_speed, double coasting_min_volume, bool extruder_switch_retract = false);
-    
-    /*!
-     * Write a retraction: either an extruder switch retraction or a normal retraction based on the last extrusion paths retraction config.
-     * \param gcode The gcode to write the planned paths to
-     * \param extruder_plan_idx The index of the current extruder plan
-     * \param path_idx_travel_after Index in GCodePlanner::paths to the travel move before which to do the retraction
-     */
-    void writeRetraction(GCodeExport& gcode, unsigned int extruder_plan_idx, unsigned int path_idx_travel_after);
-    
-    /*!
-     * Write a retraction: either an extruder switch retraction or a normal retraction based on the given retraction config.
-     * \param gcode The gcode to write the planned paths to
-     * \param extruder_switch_retract Whether to write an extruder switch retract
-     * \param retraction_config The config used.
-     */
-    void writeRetraction(GCodeExport& gcode, bool extruder_switch_retract, RetractionConfig* retraction_config);
-    
-    /*!
-     * Applying speed corrections for minimal layer times and determine the fanSpeed. 
-     */
-    void processFanSpeedAndMinimalLayerTime();
-    
-    /*!
-     * Add a travel move to the layer plan to move inside the current layer part by a given distance away from the outline.
-     * This is supposed to be called when the nozzle is around the boundary of a layer part, not when the nozzle is in the middle of support, or in the middle of the air.
-     * 
-     * \param distance The distance to the comb boundary after we moved inside it.
-     */
     void moveInsideCombBoundary(int distance);
+
+    void addPolygon(PolygonRef polygon, int startIdx, GCodePathConfig* config);
+
+    void addPolygonsByOptimizer(Polygons& polygons, GCodePathConfig* config);
+
+    void addLinesByOptimizer(Polygons& polygons, GCodePathConfig* config);
+
+    void forceMinimalLayerTime(double minTime, int minimalSpeed, double travelTime, double extrusionTime);
+    
+    void getTimes(double& travelTime, double& extrudeTime);
+
+    void writeGCode(bool liftHeadIfNeeded, int layerThickness);
 };
 
 }//namespace cura

src/infill.cpp

@@ -2,57 +2,8 @@
 #include "infill.h"
 #include "functional"
 #include "utils/polygonUtils.h"
-#include "utils/AABB.h"
-#include "utils/logoutput.h"
-
 namespace cura {
 
-void Infill::generate(Polygons& result_polygons, Polygons& result_lines, Polygons* in_between)
-{
-    if (in_outline.size() == 0) return;
-    if (line_distance == 0) return;
-    const Polygons* outline = &in_outline;
-    Polygons outline_offsetted;
-    switch(pattern)
-    {
-    case EFillMethod::GRID:
-        generateGridInfill(in_outline, outlineOffset, result_lines, extrusion_width, line_distance * 2, infill_overlap, fill_angle);
-        break;
-    case EFillMethod::LINES:
-        generateLineInfill(in_outline, outlineOffset, result_lines, extrusion_width, line_distance, infill_overlap, fill_angle);
-        break;
-    case EFillMethod::TRIANGLES:
-        generateTriangleInfill(in_outline, outlineOffset, result_lines, extrusion_width, line_distance * 3, infill_overlap, fill_angle);
-        break;
-    case EFillMethod::CONCENTRIC:
-        if (outlineOffset != 0)
-        {
-            PolygonUtils::offsetSafe(in_outline, outlineOffset, extrusion_width, outline_offsetted, avoidOverlappingPerimeters);
-            outline = &outline_offsetted;
-        }
-        if (abs(extrusion_width - line_distance) < 10)
-        {
-            generateConcentricInfillDense(*outline, result_polygons, in_between, extrusion_width, avoidOverlappingPerimeters);
-        }
-        else 
-        {
-            generateConcentricInfill(*outline, result_polygons, line_distance);
-        }
-        break;
-    case EFillMethod::ZIG_ZAG:
-        if (outlineOffset != 0)
-        {
-            PolygonUtils::offsetSafe(in_outline, outlineOffset, extrusion_width, outline_offsetted, avoidOverlappingPerimeters);
-            outline = &outline_offsetted;
-        }
-        generateZigZagInfill(*outline, result_lines, extrusion_width, line_distance, infill_overlap, fill_angle, connect_zigzags, use_endPieces);
-        break;
-    default:
-        logError("Fill pattern has unknown value.\n");
-        break;
-    }
-}
-
     
       
 void generateConcentricInfillDense(Polygons outline, Polygons& result, Polygons* in_between, int extrusionWidth, bool avoidOverlappingPerimeters)
@@ -65,7 +16,7 @@ void generateConcentricInfillDense(Polygons outline, Polygons& result, Polygons*
             result.add(r);
         }
         Polygons next_outline;
-        PolygonUtils::offsetExtrusionWidth(outline, true, extrusionWidth, next_outline, in_between, avoidOverlappingPerimeters);
+        offsetExtrusionWidth(outline, true, extrusionWidth, next_outline, in_between, avoidOverlappingPerimeters);
         outline = next_outline;
     } 
 
@@ -86,7 +37,7 @@ void generateConcentricInfill(Polygons outline, Polygons& result, int inset_valu
 
 
 void generateGridInfill(const Polygons& in_outline, int outlineOffset, Polygons& result,
-                        int extrusionWidth, int lineSpacing, double infillOverlap,
+                        int extrusionWidth, int lineSpacing, int infillOverlap,
                         double rotation)
 {
     generateLineInfill(in_outline, outlineOffset, result, extrusionWidth, lineSpacing,
@@ -96,7 +47,7 @@ void generateGridInfill(const Polygons& in_outline, int outlineOffset, Polygons&
 }
 
 void generateTriangleInfill(const Polygons& in_outline, int outlineOffset, Polygons& result,
-                        int extrusionWidth, int lineSpacing, double infillOverlap,
+                        int extrusionWidth, int lineSpacing, int infillOverlap,
                         double rotation)
 {
     generateLineInfill(in_outline, outlineOffset, result, extrusionWidth, lineSpacing,
@@ -138,11 +89,28 @@ void addLineInfill(Polygons& result, PointMatrix matrix, int scanline_min_idx, i
     }
 }
 
-void generateLineInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation)
+/*!
+ * generate lines within the area of \p in_outline, at regular intervals of \p lineSpacing
+ * 
+ * idea:
+ * intersect a regular grid of 'scanlines' with the area inside \p in_outline
+ * 
+ * we call the areas between two consecutive scanlines a 'scansegment'.
+ * Scansegment x is the area between scanline x and scanline x+1
+ * 
+ * algorithm:
+ * 1) for each line segment of each polygon:
+ *      store the intersections of that line segment with all scanlines in a mapping (vector of vectors) from scanline to intersections
+ *      (zigzag): add boundary segments to result
+ * 2) for each scanline:
+ *      sort the associated intersections 
+ *      and connect them using the even-odd rule
+ * 
+ */
+void generateLineInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation)
 {
-    if (lineSpacing == 0) return;
     if (in_outline.size() == 0) return;
-    Polygons outline = ((outlineOffset)? in_outline.offset(outlineOffset) : in_outline).offset(extrusionWidth * infillOverlap / 100);
+    Polygons outline = in_outline.offset(extrusionWidth * infillOverlap / 100 + outlineOffset);
     if (outline.size() == 0) return;
     
     PointMatrix matrix(rotation);
@@ -196,13 +164,62 @@ void generateLineInfill(const Polygons& in_outline, int outlineOffset, Polygons&
 }
 
 
-void generateZigZagInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation, bool connect_zigzags, bool use_endPieces)
+void generateZigZagInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags, bool use_endPieces)
 {
-    if (use_endPieces) return generateZigZagIninfill_endPieces(in_outline, result, extrusionWidth, lineSpacing, infillOverlap, rotation, connect_zigzags);
-    else return generateZigZagIninfill_noEndPieces(in_outline, result, extrusionWidth, lineSpacing, infillOverlap, rotation);
+    if (use_endPieces) return generateZigZagInfill_endPieces(in_outline, result, extrusionWidth, lineSpacing, infillOverlap, rotation, connect_zigzags);
+    else return generateZigZagInfill_noEndPieces(in_outline, result, extrusionWidth, lineSpacing, infillOverlap, rotation);
 }
 
-void generateZigZagIninfill_endPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation, bool connect_zigzags)
+/*!
+ * adapted from generateLineInfill(.)
+ * 
+ * generate lines within the area of [in_outline], at regular intervals of [lineSpacing]
+ * idea:
+ * intersect a regular grid of 'scanlines' with the area inside [in_outline]
+ * sigzag:
+ * include pieces of boundary, connecting the lines, forming an accordion like zigzag instead of separate lines    |_|^|_|
+ * 
+ * we call the areas between two consecutive scanlines a 'scansegment'
+ * 
+ * algorithm:
+ * 1. for each line segment of each polygon:
+ *      store the intersections of that line segment with all scanlines in a mapping (vector of vectors) from scanline to intersections
+ *      (zigzag): add boundary segments to result
+ * 2. for each scanline:
+ *      sort the associated intersections 
+ *      and connect them using the even-odd rule
+ * 
+ * zigzag algorithm:
+ * while walking around (each) polygon (1.)
+ *  if polygon intersects with even scanline
+ *      start boundary segment (add each following segment to the [result])
+ *  when polygon intersects with a scanline again
+ *      stop boundary segment (stop adding segments to the [result])
+ *      if polygon intersects with even scanline again (instead of odd)
+ *          dont add the last line segment to the boundary (unless [connect_zigzags])
+ * 
+ * 
+ *     <--
+ *     ___
+ *    |   |   |
+ *    |   |   |
+ *    |   |___|
+ *         -->
+ * 
+ *        ^ = even scanline
+ * 
+ * start boundary from even scanline! :D
+ * 
+ * 
+ *          _____
+ *   |     |     | ,
+ *   |     |     |  |
+ *   |_____|     |__/
+ * 
+ *   ^     ^     ^    scanlines
+ *                 ^  disconnected end piece
+ */
+void generateZigZagInfill_endPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags)
 {
 //     if (in_outline.size() == 0) return;
 //     Polygons outline = in_outline.offset(extrusionWidth * infillOverlap / 100 - extrusionWidth / 2);
@@ -236,7 +253,7 @@ void generateZigZagIninfill_endPieces(const Polygons& in_outline, Polygons& resu
         std::vector<Point> unevenBoundarySegment; // stored cause for connected_zigzags a boundary segment which ends in an uneven scanline needs to be included
         
         bool isFirstBoundarySegment = true;
-        bool firstBoundarySegmentEndsInEven = false;
+        bool firstBoundarySegmentEndsInEven;
         
         bool isEvenScanSegment = false; 
         
@@ -336,7 +353,7 @@ void generateZigZagIninfill_endPieces(const Polygons& in_outline, Polygons& resu
 }
 
 
-void generateZigZagIninfill_noEndPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation)
+void generateZigZagInfill_noEndPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation)
 {
     if (in_outline.size() == 0) return;
     Polygons outline = in_outline.offset(extrusionWidth * infillOverlap / 100 - extrusionWidth / 2);
@@ -368,7 +385,7 @@ void generateZigZagIninfill_noEndPieces(const Polygons& in_outline, Polygons& re
         std::vector<Point> boundarySegment;
         
         bool isFirstBoundarySegment = true;
-        bool firstBoundarySegmentEndsInEven = true;
+        bool firstBoundarySegmentEndsInEven;
         
         bool isEvenScanSegment = false; 
         

src/infill.h

@@ -3,124 +3,17 @@
 #define INFILL_H
 
 #include "utils/polygon.h"
-#include "settings.h"
 
-namespace cura
-{
-    class Infill 
-    {
-        EFillMethod pattern;
-        const Polygons& in_outline;
-        int outlineOffset;
-        bool avoidOverlappingPerimeters;
-        int extrusion_width;
-        int line_distance;
-        double infill_overlap;
-        double fill_angle;
-        bool connect_zigzags;
-        bool use_endPieces;
+namespace cura {
 
-    public:
-        Infill(EFillMethod pattern, const Polygons& in_outline, int outlineOffset, bool avoidOverlappingPerimeters, int extrusion_width, int line_distance, double infill_overlap, double fill_angle, bool connect_zigzags, bool use_endPieces)
-        : pattern(pattern)
-        , in_outline(in_outline)
-        , outlineOffset(outlineOffset)
-        , avoidOverlappingPerimeters(avoidOverlappingPerimeters)
-        , extrusion_width(extrusion_width)
-        , line_distance(line_distance)
-        , infill_overlap(infill_overlap)
-        , fill_angle(fill_angle)
-        , connect_zigzags(connect_zigzags)
-        , use_endPieces(use_endPieces)
-        {
-        }
-        void generate(Polygons& result_polygons, Polygons& result_lines, Polygons* in_between);
-    };
-
-    void generateInfill(EFillMethod pattern, const Polygons& in_outline, int outlineOffset, Polygons& result_polygons, Polygons& result_lines, Polygons* in_between, bool avoidOverlappingPerimeters, int extrusion_width, int line_distance, double infill_overlap, double fill_angle, bool connect_zigzags, bool use_endPieces);
-
-    void generateConcentricInfill(Polygons outline, Polygons& result, int inset_value);
-
-    void generateConcentricInfillDense(Polygons outline, Polygons& result, Polygons* in_between, int extrusionWidth, bool avoidOverlappingPerimeters);
-
-    void generateGridInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation);
-
-    void generateTriangleInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation);
-
-    /*!
-     * generate lines within the area of \p in_outline, at regular intervals of \p lineSpacing
-     * 
-     * idea:
-     * intersect a regular grid of 'scanlines' with the area inside \p in_outline
-     * 
-     * we call the areas between two consecutive scanlines a 'scansegment'.
-     * Scansegment x is the area between scanline x and scanline x+1
-     * 
-     * algorithm:
-     * 1) for each line segment of each polygon:
-     *      store the intersections of that line segment with all scanlines in a mapping (vector of vectors) from scanline to intersections
-     *      (zigzag): add boundary segments to result
-     * 2) for each scanline:
-     *      sort the associated intersections 
-     *      and connect them using the even-odd rule
-     * 
-     */
-    void generateLineInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation);
-
-    void generateZigZagInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation, bool connect_zigzags, bool use_endPieces);
-
-    /*!
-     * adapted from generateLineInfill(.)
-     * 
-     * generate lines within the area of [in_outline], at regular intervals of [lineSpacing]
-     * idea:
-     * intersect a regular grid of 'scanlines' with the area inside [in_outline]
-     * sigzag:
-     * include pieces of boundary, connecting the lines, forming an accordion like zigzag instead of separate lines    |_|^|_|
-     * 
-     * we call the areas between two consecutive scanlines a 'scansegment'
-     * 
-     * algorithm:
-     * 1. for each line segment of each polygon:
-     *      store the intersections of that line segment with all scanlines in a mapping (vector of vectors) from scanline to intersections
-     *      (zigzag): add boundary segments to result
-     * 2. for each scanline:
-     *      sort the associated intersections 
-     *      and connect them using the even-odd rule
-     * 
-     * zigzag algorithm:
-     * while walking around (each) polygon (1.)
-     *  if polygon intersects with even scanline
-     *      start boundary segment (add each following segment to the [result])
-     *  when polygon intersects with a scanline again
-     *      stop boundary segment (stop adding segments to the [result])
-     *      if polygon intersects with even scanline again (instead of odd)
-     *          dont add the last line segment to the boundary (unless [connect_zigzags])
-     * 
-     * 
-     *     <--
-     *     ___
-     *    |   |   |
-     *    |   |   |
-     *    |   |___|
-     *         -->
-     * 
-     *        ^ = even scanline
-     * 
-     * start boundary from even scanline! :D
-     * 
-     * 
-     *          _____
-     *   |     |     | ,
-     *   |     |     |  |
-     *   |_____|     |__/
-     * 
-     *   ^     ^     ^    scanlines
-     *                 ^  disconnected end piece
-     */
-    void generateZigZagIninfill_endPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation, bool connect_zigzags);
-
-    void generateZigZagIninfill_noEndPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, double infillOverlap, double rotation);
+void generateConcentricInfill(Polygons outline, Polygons& result, int inset_value);
+void generateConcentricInfillDense(Polygons outline, Polygons& result, Polygons* in_between, int extrusionWidth, bool avoidOverlappingPerimeters);
+void generateGridInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
+void generateTriangleInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
+void generateLineInfill(const Polygons& in_outline, int outlineOffset, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
+void generateZigZagInfill(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags, bool use_endPieces);
+void generateZigZagInfill_endPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation, bool connect_zigzags);
+void generateZigZagInfill_noEndPieces(const Polygons& in_outline, Polygons& result, int extrusionWidth, int lineSpacing, int infillOverlap, double rotation);
 }//namespace cura
 
 #endif//INFILL_H

src/inset.cpp

@@ -1,10 +1,13 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
 #include "inset.h"
+#include "polygonOptimizer.h"
 #include "utils/polygonUtils.h"
 namespace cura {
 
-void generateInsets(SliceLayerPart* part, int nozzle_width, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters)
+void generateInsets(SliceLayerPart* part, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters)
 {
+    int combBoundaryInset = line_width_x/2; // hard coded value
+    part->combBoundery = part->outline.offset(-combBoundaryInset);
     if (insetCount == 0)
     {
         part->insets.push_back(part->outline);
@@ -16,34 +19,16 @@ void generateInsets(SliceLayerPart* part, int nozzle_width, int line_width_0, in
         part->insets.push_back(Polygons());
         if (i == 0)
         {
-            if (line_width_0 < nozzle_width)
-            {
-                PolygonUtils::offsetSafe(part->outline, - nozzle_width/2, line_width_0, part->insets[0], avoidOverlappingPerimeters_0);
-            }
-            else 
-            {
-                PolygonUtils::offsetSafe(part->outline, - line_width_0/2, line_width_0, part->insets[0], avoidOverlappingPerimeters_0);
-            }
+            offsetSafe(part->outline, - line_width_x/2, line_width_x, part->insets[i], avoidOverlappingPerimeters);
         } else if (i == 1)
         {
-            if (line_width_0 < nozzle_width)
-            {
-                int offset_from_first_boundary_for_edge_of_outer_wall = -nozzle_width/2; 
-                // ideally this /\ should be: nozzle_width/2 - line_width_0; however, factually, the nozzle will fill up part of the perimeter gaps
-                PolygonUtils::offsetSafe(part->insets[0], nozzle_width/2 - line_width_0 - line_width_x/2, offset_from_first_boundary_for_edge_of_outer_wall, line_width_x, part->insets[1], &part->perimeterGaps, avoidOverlappingPerimeters);
-            }
-            else 
-            {
-                PolygonUtils::offsetSafe(part->insets[0], -line_width_0/2 - line_width_x/2, -line_width_0/2, line_width_x, part->insets[1], &part->perimeterGaps, avoidOverlappingPerimeters);
-            }
+            offsetExtrusionWidth(part->insets[i-1], true, line_width_0, part->insets[i], &part->perimeterGaps, avoidOverlappingPerimeters);
         } else
         {
-            PolygonUtils::offsetExtrusionWidth(part->insets[i-1], true, line_width_x, part->insets[i], &part->perimeterGaps, avoidOverlappingPerimeters);
+            offsetExtrusionWidth(part->insets[i-1], true, line_width_x, part->insets[i], &part->perimeterGaps, avoidOverlappingPerimeters);
         }
-        
-        
-        //Finally optimize all the polygons. Every point removed saves time in the long run.
-        part->insets[i].simplify();
+            
+        optimizePolygons(part->insets[i]);
         if (part->insets[i].size() < 1)
         {
             part->insets.pop_back();
@@ -52,11 +37,12 @@ void generateInsets(SliceLayerPart* part, int nozzle_width, int line_width_0, in
     }
 }
 
-void generateInsets(SliceLayer* layer, int nozzle_width, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters)
+
+void generateInsets(SliceLayer* layer, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters)
 {
     for(unsigned int partNr = 0; partNr < layer->parts.size(); partNr++)
     {
-        generateInsets(&layer->parts[partNr], nozzle_width, line_width_0, line_width_x, insetCount, avoidOverlappingPerimeters_0, avoidOverlappingPerimeters);
+        generateInsets(&layer->parts[partNr], line_width_0, line_width_x, insetCount, avoidOverlappingPerimeters);
     }
     
     //Remove the parts which did not generate an inset. As these parts are too small to print,
@@ -71,33 +57,4 @@ void generateInsets(SliceLayer* layer, int nozzle_width, int line_width_0, int l
     }
 }
 
-void generateWallReinforcementWallExtraWalls(SliceLayerPart* part, ReinforcementWall& reinforcement_wall, int line_width_x, int insetCount, bool avoidOverlappingPerimeters)
-{
-    // optimize all the polygons. Every point removed saves time in the long run.
-    reinforcement_wall.wall_reinforcement_axtra_walls[0].simplify();
-    if (reinforcement_wall.wall_reinforcement_axtra_walls[0].size() < 1)
-    {
-        reinforcement_wall.wall_reinforcement_axtra_walls.pop_back();
-    }
-    
-    if (reinforcement_wall.wall_reinforcement_axtra_walls[0].size() > 0)
-    {
-        for(int i=1; i<insetCount; i++)
-        {
-            reinforcement_wall.wall_reinforcement_axtra_walls.push_back(Polygons());
-            PolygonUtils::offsetExtrusionWidth(reinforcement_wall.wall_reinforcement_axtra_walls[i-1], true, line_width_x, reinforcement_wall.wall_reinforcement_axtra_walls[i], &part->perimeterGaps, avoidOverlappingPerimeters);
-            
-            
-            //Finally optimize all the polygons. Every point removed saves time in the long run.
-            reinforcement_wall.wall_reinforcement_axtra_walls[i].simplify();
-            if (reinforcement_wall.wall_reinforcement_axtra_walls[i].size() < 1)
-            {
-                reinforcement_wall.wall_reinforcement_axtra_walls.pop_back();
-                break;
-            }
-        }
-    }
-}
-
-
 }//namespace cura

src/inset.h

@@ -11,40 +11,23 @@ namespace cura
  * Generates the insets / perimeters for a single layer part.
  * 
  * \param part The part for which to generate the insets.
- * \param nozzle_width The diameter of the hole in the nozzle
- * \param line_width_0 line width of the outer wall
- * \param line_width_x line width of other walls
+ * \param line_width_0 Line width of the outer wall
+ * \param line_width_x Line width of other walls
  * \param insetCount The number of insets to to generate
- * \param avoidOverlappingPerimeters_0 Whether to remove the parts of the first perimeters where it have overlap with itself (and store the gaps thus created in the \p storage)
  * \param avoidOverlappingPerimeters Whether to remove the parts of two consecutive perimeters where they have overlap (and store the gaps thus created in the \p part)
  */
-void generateInsets(SliceLayerPart* part, int nozzle_width, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters);
+void generateInsets(SliceLayerPart* part, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters);
 
 /*!
  * Generates the insets / perimeters for all parts in a layer.
  * 
- * Note that the second inset gets offsetted by \p line_width_0 instead of the first, 
- * which leads to better results for a smaller \p line_width_0 than \p line_width_x and when printing the outer wall last.
- * 
  * \param layer The layer for which to generate the insets.
- * \param nozzle_width The diameter of the hole in the nozzle
- * \param line_width_0 line width of the outer wall
- * \param line_width_x line width of other walls
+ * \param line_width_0 Line width of the outer wall
+ * \param line_width_x Line width of other walls
  * \param insetCount The number of insets to to generate
- * \param avoidOverlappingPerimeters_0 Whether to remove the parts of the first perimeters where it have overlap with itself (and store the gaps thus created in the \p storage)
  * \param avoidOverlappingPerimeters Whether to remove the parts of two consecutive perimeters where they have overlap (and store the gaps thus created in the \p part)
  */ 
-void generateInsets(SliceLayer* layer, int nozzle_width, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters);
-
-/*!
- * Generates the wall reinforcement extra walls for a single layer part.
- * 
- * \param part The part for which to generate the extra walls.
- * \param line_width_x line width of the walls
- * \param insetCount The number of insets to to generate
- * \param avoidOverlappingPerimeters Whether to remove the parts of two consecutive perimeters where they have overlap (and store the gaps thus created in the \p part)
- */
-void generateWallReinforcementWallExtraWalls(SliceLayerPart* part, ReinforcementWall& reinforcement_wall, int line_width_x, int insetCount, bool avoidOverlappingPerimeters);
+void generateInsets(SliceLayer* layer, int line_width_0, int line_width_x, int insetCount, bool avoidOverlappingPerimeters);
 
 }//namespace cura
 

src/layerPart.cpp

@@ -1,10 +1,8 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include <stdio.h>
 
 #include "layerPart.h"
 #include "settings.h"
-#include "Progress.h"
-
-#include "utils/SVG.h" // debug output
 
 /*
 The layer-part creation step is the first step in creating actual useful data for 3D printing.
@@ -13,7 +11,7 @@ each of these groups is called a "part", which sometimes are also known as "isla
 isolated areas in the 2D layer with possible holes.
 
 Creating "parts" is an important step, as all elements in a single part should be printed before going to another part.
-And all every bit inside a single part can be printed without the nozzle leaving the boundary of this part.
+And all every bit inside a single part can be printed without the nozzle leaving the boundery of this part.
 
 It's also the first step that stores the result in the "data storage" so all other steps can access it.
 */
@@ -22,7 +20,7 @@ namespace cura {
 
 void createLayerWithParts(SliceLayer& storageLayer, SlicerLayer* layer, bool union_layers, bool union_all_remove_holes)
 {
-    storageLayer.openPolyLines = layer->openPolylines;
+    storageLayer.openLines = layer->openPolygons;
 
     if (union_all_remove_holes)
     {
@@ -33,15 +31,16 @@ void createLayerWithParts(SliceLayer& storageLayer, SlicerLayer* layer, bool uni
         }
     }
     
-    std::vector<PolygonsPart> result;
+    std::vector<Polygons> result;
     result = layer->polygonList.splitIntoParts(union_layers || union_all_remove_holes);
     for(unsigned int i=0; i<result.size(); i++)
     {
-        storageLayer.parts.emplace_back();
+        storageLayer.parts.push_back(SliceLayerPart());
         storageLayer.parts[i].outline = result[i];
         storageLayer.parts[i].boundaryBox.calculate(storageLayer.parts[i].outline);
     }
 }
+
 void createLayerParts(SliceMeshStorage& storage, Slicer* slicer, bool union_layers, bool union_all_remove_holes)
 {
     for(unsigned int layer_nr = 0; layer_nr < slicer->layers.size(); layer_nr++)
@@ -50,48 +49,41 @@ void createLayerParts(SliceMeshStorage& storage, Slicer* slicer, bool union_laye
         storage.layers[layer_nr].sliceZ = slicer->layers[layer_nr].z;
         storage.layers[layer_nr].printZ = slicer->layers[layer_nr].z;
         createLayerWithParts(storage.layers[layer_nr], &slicer->layers[layer_nr], union_layers, union_all_remove_holes);
+        
+        logProgress("layerparts", layer_nr + 1, slicer->layers.size());
     }
 }
 
-void layerparts2HTML(SliceDataStorage& storage, const char* filename, bool all_layers, int layer_nr)
+void dumpLayerparts(SliceDataStorage& storage, const char* filename)
 {
-    
     FILE* out = fopen(filename, "w");
     fprintf(out, "<!DOCTYPE html><html><body>");
     Point3 modelSize = storage.model_size;
     Point3 modelMin = storage.model_min;
     
-    Point model_min_2d = Point(modelMin.x, modelMin.y);
-    Point model_max_2d = Point(modelSize.x, modelSize.y) + model_min_2d;
-    AABB aabb(model_min_2d, model_max_2d);
-    
-    SVG svg(filename, aabb);
-    
     for(SliceMeshStorage& mesh : storage.meshes)
     {
-        for(unsigned int layer_idx = 0; layer_idx < mesh.layers.size(); layer_idx++)
+        for(SliceLayer& layer : mesh.layers)
         {
-            if (!(all_layers || int(layer_idx) == layer_nr)) { continue; }
-            SliceLayer& layer = mesh.layers[layer_idx];
-//             fprintf(out, "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width: 500px; height:500px\">\n");
+            fprintf(out, "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width: 500px; height:500px\">\n");
             for(SliceLayerPart& part : layer.parts)
             {
-                svg.writeAreas(part.outline);
-                svg.writePoints(part.outline);
-//                 for(unsigned int j=0;j<part.outline.size();j++)
-//                 {
-//                     fprintf(out, "<polygon points=\"");
-//                     for(unsigned int k=0;k<part.outline[j].size();k++)
-//                         fprintf(out, "%f,%f ", float(part.outline[j][k].X - modelMin.x)/modelSize.x*500, float(part.outline[j][k].Y - modelMin.y)/modelSize.y*500);
-//                     if (j == 0)
-//                         fprintf(out, "\" style=\"fill:gray; stroke:black;stroke-width:1\" />\n");
-//                     else
-//                         fprintf(out, "\" style=\"fill:red; stroke:black;stroke-width:1\" />\n");
-//                 }
+                for(unsigned int j=0;j<part.outline.size();j++)
+                {
+                    fprintf(out, "<polygon points=\"");
+                    for(unsigned int k=0;k<part.outline[j].size();k++)
+                        fprintf(out, "%f,%f ", float(part.outline[j][k].X - modelMin.x)/modelSize.x*500, float(part.outline[j][k].Y - modelMin.y)/modelSize.y*500);
+                    if (j == 0)
+                        fprintf(out, "\" style=\"fill:gray; stroke:black;stroke-width:1\" />\n");
+                    else
+                        fprintf(out, "\" style=\"fill:red; stroke:black;stroke-width:1\" />\n");
+                }
             }
-//             fprintf(out, "</svg>\n");
+            fprintf(out, "</svg>\n");
         }
     }
+    fprintf(out, "</body></html>");
+    fclose(out);
 }
 
 }//namespace cura

src/layerPart.h

@@ -4,7 +4,6 @@
 
 #include "sliceDataStorage.h"
 #include "slicer.h"
-#include "commandSocket.h"
 
 /*
 The layer-part creation step is the first step in creating actual useful data for 3D printing.
@@ -13,7 +12,7 @@ each of these groups is called a "part", which sometimes are also known as "isla
 isolated areas in the 2D layer with possible holes.
 
 Creating "parts" is an important step, as all elements in a single part should be printed before going to another part.
-And all every bit inside a single part can be printed without the nozzle leaving the boundary of this part.
+And all every bit inside a single part can be printed without the nozzle leaving the boundery of this part.
 
 It's also the first step that stores the result in the "data storage" so all other steps can access it.
 */
@@ -24,7 +23,7 @@ void createLayerWithParts(SliceLayer& storageLayer, SlicerLayer* layer, bool uni
 
 void createLayerParts(SliceMeshStorage& storage, Slicer* slicer, bool union_layers, bool union_all_remove_holes);
 
-void layerparts2HTML(SliceDataStorage& storage, const char* filename, bool all_layers = true, int layer_nr = -1);
+void dumpLayerparts(SliceDataStorage& storage, const char* filename);
 
 }//namespace cura
 

src/main.cpp

@@ -14,38 +14,30 @@
 #include "utils/gettime.h"
 #include "utils/logoutput.h"
 #include "utils/string.h"
+#include "sliceDataStorage.h"
 
-#include "FffProcessor.h"
+#include "modelFile/modelFile.h"
+#include "settings.h"
 #include "settingRegistry.h"
+#include "multiVolumes.h"
+#include "polygonOptimizer.h"
+#include "slicer.h"
+#include "layerPart.h"
+#include "inset.h"
+#include "skin.h"
+#include "infill.h"
+#include "bridge.h"
+#include "support.h"
+#include "pathOrderOptimizer.h"
+#include "skirt.h"
+#include "raft.h"
+#include "comb.h"
+#include "gcodeExport.h"
+#include "fffProcessor.h"
 
-namespace cura
-{
-    
 void print_usage()
 {
-    cura::logError("\n");
-    cura::logError("usage:\n");
-    cura::logError("CuraEngine help\n");
-    cura::logError("\tShow this help message\n");
-    cura::logError("\n");
-    cura::logError("CuraEngine connect <host>[:<port>] [-j <settings.json>]\n");
-    cura::logError("  --connect <host>[:<port>]\n\tConnect to <host> via a command socket, \n\tinstead of passing information via the command line\n");
-    cura::logError("  -j\n\tLoad settings.json file to register all settings and their defaults\n");
-    cura::logError("\n");
-    cura::logError("CuraEngine slice [-v] [-p] [-j <settings.json>] [-s <settingkey>=<value>] [-g] [-e] [-o <output.gcode>] [-l <model.stl>] [--next]\n");
-    cura::logError("  -v\n\tIncrease the verbose level (show log messages).\n");
-    cura::logError("  -p\n\tLog progress information.\n");
-    cura::logError("  -j\n\tLoad settings.json file to register all settings and their defaults.\n");
-    cura::logError("  -s <setting>=<value>\n\tSet a setting to a value for the last supplied object, \n\textruder train, or general settings.\n");
-    cura::logError("  -l <model_file>\n\tLoad an STL model. \n");
-    cura::logError("  -g\n\tSwitch setting focus to the current mesh group only.\n\tUsed for one-at-a-time printing.\n");
-    cura::logError("  -e\n\tAdd a new extruder train.\n");
-    cura::logError("  --next\n\tGenerate gcode for the previously supplied mesh group and append that to \n\tthe gcode of further models for one-at-a-time printing.\n");
-    cura::logError("  -o <output_file>\n\tSpecify a file to which to write the generated gcode.\n");
-    cura::logError("\n");
-    cura::logError("The settings are appended to the last supplied object:\n");
-    cura::logError("CuraEngine slice [general settings] \n\t-g [current group settings] \n\t-e [extruder train settings] \n\t-l obj_inheriting_from_last_extruder_train.stl [object settings] \n\t--next [next group settings]\n\t... etc.\n");
-    cura::logError("\n");
+    cura::logError("usage: CuraEngine [-h] [-v] [-m 3x3matrix] [-c <config file>] [-s <settingkey>=<value>] -o <output.gcode> <model.stl>\n");
 }
 
 //Signal handler for a "floating point exception", which can also be integer division by zero errors.
@@ -56,220 +48,6 @@ void signal_FPE(int n)
     exit(1);
 }
 
-void print_call(int argc, char **argv)
-{
-    cura::logError("Command called:\n");
-    for (int idx= 0; idx < argc; idx++)
-        cura::logError("%s ", argv[idx]);
-    cura::logError("\n");
-}
-
-void connect(int argc, char **argv)
-{
-    CommandSocket* commandSocket = new CommandSocket();
-    std::string ip;
-    int port = 49674;
-    
-    std::string ip_port(argv[2]);
-    if (ip_port.find(':') != std::string::npos)
-    {
-        ip = ip_port.substr(0, ip_port.find(':'));
-        port = std::stoi(ip_port.substr(ip_port.find(':') + 1).data());
-    }
-
-    
-    for(int argn = 3; argn < argc; argn++)
-    {
-        char* str = argv[argn];
-        if (str[0] == '-')
-        {
-            for(str++; *str; str++)
-            {
-                switch(*str)
-                {
-                case 'v':
-                    cura::increaseVerboseLevel();
-                    break;
-                case 'j':
-                    argn++;
-                    if (SettingRegistry::getInstance()->loadJSONsettings(argv[argn]))
-                    {
-                        cura::logError("ERROR: Failed to load json file: %s\n", argv[argn]);
-                    }
-                    break;
-                default:
-                    cura::logError("Unknown option: %c\n", *str);
-                    print_call(argc, argv);
-                    print_usage();
-                    break;
-                }
-            }
-        }
-    }
-    
-    commandSocket->connect(ip, port);
-}
-
-void slice(int argc, char **argv)
-{   
-    FffProcessor::getInstance()->time_keeper.restart();
-    
-    FMatrix3x3 transformation; // the transformation applied to a model when loaded
-                        
-    MeshGroup* meshgroup = new MeshGroup(FffProcessor::getInstance());
-    
-    int extruder_train_nr = 0;
-
-    SettingsBase* last_extruder_train = meshgroup->createExtruderTrain(0); 
-    SettingsBase* last_settings_object = FffProcessor::getInstance();
-    for(int argn = 2; argn < argc; argn++)
-    {
-        char* str = argv[argn];
-        if (str[0] == '-')
-        {
-            if (str[1] == '-')
-            {
-                if (stringcasecompare(str, "--next") == 0)
-                {
-                    try {
-                        //Catch all exceptions, this prevents the "something went wrong" dialog on windows to pop up on a thrown exception.
-                        // Only ClipperLib currently throws exceptions. And only in case that it makes an internal error.
-                        meshgroup->finalize();
-                        log("Loaded from disk in %5.3fs\n", FffProcessor::getInstance()->time_keeper.restart());
-                        
-                        for (int extruder_nr = 0; extruder_nr < FffProcessor::getInstance()->getSettingAsCount("machine_extruder_count"); extruder_nr++)
-                        { // initialize remaining extruder trains and load the defaults
-                            meshgroup->getExtruderTrain(extruder_nr)->setExtruderTrainDefaults(extruder_nr); // create new extruder train objects or use already existing ones
-                        }
-                        //start slicing
-                        FffProcessor::getInstance()->processMeshGroup(meshgroup);
-                        
-                        // initialize loading of new meshes
-                        FffProcessor::getInstance()->time_keeper.restart();
-                        delete meshgroup;
-                        meshgroup = new MeshGroup(FffProcessor::getInstance());
-                        last_settings_object = meshgroup;
-                    }catch(...){
-                        cura::logError("Unknown exception\n");
-                        exit(1);
-                    }
-                    break;
-                }else{
-                    cura::logError("Unknown option: %s\n", str);
-                }
-            }else{
-                for(str++; *str; str++)
-                {
-                    switch(*str)
-                    {
-                    case 'v':
-                        cura::increaseVerboseLevel();
-                        break;
-                    case 'p':
-                        cura::enableProgressLogging();
-                        break;
-                    case 'j':
-                        argn++;
-                        if (SettingRegistry::getInstance()->loadJSONsettings(argv[argn]))
-                        {
-                            cura::logError("ERROR: Failed to load json file: %s\n", argv[argn]);
-                        }
-                        break;
-                    case 'e':
-                        str++;
-                        extruder_train_nr = int(*str - '0'); // TODO: parse int instead (now "-e10"="-e:" , "-e11"="-e;" , "-e12"="-e<" .. etc) 
-                        last_settings_object = meshgroup->createExtruderTrain(extruder_train_nr);
-                        last_extruder_train = last_settings_object;
-                        break;
-                    case 'l':
-                        argn++;
-                        
-                        log("Loading %s from disk...\n", argv[argn]);
-                        // transformation = // TODO: get a transformation from somewhere
-                        
-                        if (!loadMeshIntoMeshGroup(meshgroup, argv[argn], transformation, last_extruder_train))
-                        {
-                            logError("Failed to load model: %s\n", argv[argn]);
-                        }
-                        else 
-                        {
-                            last_settings_object = &(meshgroup->meshes.back()); // pointer is valid until a new object is added, so this is OK
-                        }
-                        break;
-                    case 'o':
-                        argn++;
-                        if (!FffProcessor::getInstance()->setTargetFile(argv[argn]))
-                        {
-                            cura::logError("Failed to open %s for output.\n", argv[argn]);
-                            exit(1);
-                        }
-                        break;
-                    case 'g':
-                        last_settings_object = meshgroup;
-                    case 's':
-                        {
-                            //Parse the given setting and store it.
-                            argn++;
-                            char* valuePtr = strchr(argv[argn], '=');
-                            if (valuePtr)
-                            {
-                                *valuePtr++ = '\0';
-
-                                last_settings_object->setSetting(argv[argn], valuePtr);
-                            }
-                        }
-                        break;
-                    default:
-                        cura::logError("Unknown option: %c\n", *str);
-                        print_call(argc, argv);
-                        print_usage();
-                        exit(1);
-                        break;
-                    }
-                }
-            }
-        }
-        else
-        {
-            
-            cura::logError("Unknown option: %s\n", argv[argn]);
-            print_call(argc, argv);
-            print_usage();
-            exit(1);
-        }
-    }
-
-    for (extruder_train_nr = 0; extruder_train_nr < FffProcessor::getInstance()->getSettingAsCount("machine_extruder_count"); extruder_train_nr++)
-    { // initialize remaining extruder trains and load the defaults
-        meshgroup->createExtruderTrain(extruder_train_nr)->setExtruderTrainDefaults(extruder_train_nr); // create new extruder train objects or use already existing ones
-    }
-    
-    
-#ifndef DEBUG
-    try {
-#endif
-        //Catch all exceptions, this prevents the "something went wrong" dialog on windows to pop up on a thrown exception.
-        // Only ClipperLib currently throws exceptions. And only in case that it makes an internal error.
-        meshgroup->finalize();
-        log("Loaded from disk in %5.3fs\n", FffProcessor::getInstance()->time_keeper.restart());
-        
-        //start slicing
-        FffProcessor::getInstance()->processMeshGroup(meshgroup);
-
-#ifndef DEBUG
-    }catch(...){
-        cura::logError("Unknown exception\n");
-        exit(1);
-    }
-#endif
-    //Finalize the processor, this adds the end.gcode. And reports statistics.
-    FffProcessor::getInstance()->finalize();
-
-    delete meshgroup;
-}
-
-}//namespace cura
-
 using namespace cura;
 
 int main(int argc, char **argv)
@@ -284,10 +62,9 @@ int main(int argc, char **argv)
     signal(SIGFPE, signal_FPE);
 #endif
 
-    Progress::init();
-    
-    
-    logCopyright("\n");
+    fffProcessor processor;
+    std::vector<std::string> files;
+
     logCopyright("Cura_SteamEngine version %s\n", VERSION);
     logCopyright("Copyright (C) 2014 David Braam\n");
     logCopyright("\n");
@@ -304,33 +81,130 @@ int main(int argc, char **argv)
     logCopyright("You should have received a copy of the GNU Affero General Public License\n");
     logCopyright("along with this program.  If not, see <http://www.gnu.org/licenses/>.\n");
 
+    CommandSocket* commandSocket = NULL;
+    std::string ip;
+    int port = 49674;
 
-    if (argc < 2)
+    for(int argn = 1; argn < argc; argn++)
     {
-        print_usage();
-        exit(1);
+        char* str = argv[argn];
+        if (str[0] == '-')
+        {
+            if (str[1] == '-')
+            {
+                if (stringcasecompare(str, "--connect") == 0)
+                {
+                    commandSocket = new CommandSocket(&processor);
+
+                    std::string ip_port(argv[argn + 1]);
+                    if (ip_port.find(':') != std::string::npos)
+                    {
+                        ip = ip_port.substr(0, ip_port.find(':'));
+                        port = std::stoi(ip_port.substr(ip_port.find(':') + 1).data());
+                    }
+
+                    argn += 1;
+                }
+                else if (stringcasecompare(str, "--") == 0)
+                {
+                    try {
+                        //Catch all exceptions, this prevents the "something went wrong" dialog on windows to pop up on a thrown exception.
+                        // Only ClipperLib currently throws exceptions. And only in case that it makes an internal error.
+                        if (files.size() > 0)
+                            processor.processFiles(files);
+                        files.clear();
+                    }catch(...){
+                        cura::logError("Unknown exception\n");
+                        exit(1);
+                    }
+                    break;
+                }else{
+                    cura::logError("Unknown option: %s\n", str);
+                }
+            }else{
+                for(str++; *str; str++)
+                {
+                    switch(*str)
+                    {
+                    case 'h':
+                        print_usage();
+                        exit(1);
+                    case 'v':
+                        cura::increaseVerboseLevel();
+                        break;
+                    case 'j':
+                        argn++;
+                        if (!SettingRegistry::getInstance()->loadJSON(argv[argn]))
+                        {
+                            cura::logError("ERROR: Failed to load json file: %s\n", argv[argn]);
+                        }
+                        break;
+                    case 'p':
+                        cura::enableProgressLogging();
+                        break;
+                    case 'o':
+                        argn++;
+                        if (!processor.setTargetFile(argv[argn]))
+                        {
+                            cura::logError("Failed to open %s for output.\n", argv[argn]);
+                            exit(1);
+                        }
+                        break;
+                    case 's':
+                        {
+                            //Parse the given setting and store it.
+                            argn++;
+                            char* valuePtr = strchr(argv[argn], '=');
+                            if (valuePtr)
+                            {
+                                *valuePtr++ = '\0';
+
+                                processor.setSetting(argv[argn], valuePtr);
+                            }
+                        }
+                        break;
+                    default:
+                        cura::logError("Unknown option: %c\n", *str);
+                        break;
+                    }
+                }
+            }
+        }else{
+            files.push_back(argv[argn]);
+        }
     }
-    
-    if (stringcasecompare(argv[1], "connect") == 0)
+
+    if (!SettingRegistry::getInstance()->settingsLoaded())
     {
-        connect(argc, argv);
-    } 
-    else if (stringcasecompare(argv[1], "slice") == 0)
-    {
-        slice(argc, argv);
+        //If no json file has been loaded, try to load the default.
+        if (!SettingRegistry::getInstance()->loadJSON("fdmprinter.json"))
+        {
+            logError("ERROR: Failed to load json file: fdmprinter.json\n");
+        }
     }
-    else if (stringcasecompare(argv[1], "help") == 0)
+        
+    if(commandSocket)
     {
-        print_usage();
-        exit(0);
+        commandSocket->connect(ip, port);
     }
     else
     {
-        cura::logError("Unknown command: %s\n", argv[1]);
-        print_call(argc, argv);
-        print_usage();
-        exit(1);
+#ifndef DEBUG
+        try {
+#endif
+            //Catch all exceptions, this prevents the "something went wrong" dialog on windows to pop up on a thrown exception.
+            // Only ClipperLib currently throws exceptions. And only in case that it makes an internal error.
+            if (files.size() > 0)
+                processor.processFiles(files);
+#ifndef DEBUG
+        }catch(...){
+            cura::logError("Unknown exception\n");
+            exit(1);
+        }
+#endif
+        //Finalize the processor, this adds the end.gcode. And reports statistics.
+        processor.finalize();
     }
     
     return 0;
-}
+}

src/mesh.cpp

@@ -1,8 +1,6 @@
 #include "mesh.h"
 #include "utils/logoutput.h"
 
-namespace cura
-{
 
 const int vertex_meld_distance = MM2INT(0.03);
 static inline uint32_t pointHash(Point3& p)
@@ -10,7 +8,7 @@ static inline uint32_t pointHash(Point3& p)
     return ((p.x + vertex_meld_distance/2) / vertex_meld_distance) ^ (((p.y + vertex_meld_distance/2) / vertex_meld_distance) << 10) ^ (((p.z + vertex_meld_distance/2) / vertex_meld_distance) << 20);
 }
 
-Mesh::Mesh(SettingsBaseVirtual* parent)
+Mesh::Mesh(SettingsBase* parent)
 : SettingsBase(parent)
 {
 }
@@ -57,11 +55,29 @@ void Mesh::finish()
 
 Point3 Mesh::min()
 {
-    return aabb.min;
+    if (vertices.size() < 1)
+        return Point3(0, 0, 0);
+    Point3 ret = vertices[0].p;
+    for(unsigned int i=0; i<vertices.size(); i++)
+    {
+        ret.x = std::min(ret.x, vertices[i].p.x);
+        ret.y = std::min(ret.y, vertices[i].p.y);
+        ret.z = std::min(ret.z, vertices[i].p.z);
+    }
+    return ret;
 }
 Point3 Mesh::max()
 {
-    return aabb.max;
+    if (vertices.size() < 1)
+        return Point3(0, 0, 0);
+    Point3 ret = vertices[0].p;
+    for(unsigned int i=0; i<vertices.size(); i++)
+    {
+        ret.x = std::max(ret.x, vertices[i].p.x);
+        ret.y = std::max(ret.y, vertices[i].p.y);
+        ret.z = std::max(ret.z, vertices[i].p.z);
+    }
+    return ret;
 }
 
 int Mesh::findIndexOfVertex(Point3& v)
@@ -77,9 +93,6 @@ int Mesh::findIndexOfVertex(Point3& v)
     }
     vertex_hash_map[hash].push_back(vertices.size());
     vertices.emplace_back(v);
-    
-    aabb.include(v);
-    
     return vertices.size() - 1;
 }
 
@@ -178,5 +191,3 @@ int Mesh::getFaceIdxWithPoints(int idx0, int idx1, int notFaceIdx)
     if (bestIdx < 0) cura::logError("Couldn't find face connected to face %i.\n", notFaceIdx);
     return bestIdx;
 }
-
-}//namespace cura

src/mesh.h

@@ -2,10 +2,7 @@
 #define MESH_H
 
 #include "settings.h"
-#include "utils/AABB.h"
 
-namespace cura
-{
 /*!
 Vertex type to be used in a Mesh.
 
@@ -17,7 +14,7 @@ public:
     Point3 p; //!< location of the vertex
     std::vector<uint32_t> connected_faces; //!< list of the indices of connected faces
 
-    MeshVertex(Point3 p) : p(p) {connected_faces.reserve(8);} //!< doesn't set connected_faces
+    MeshVertex(Point3 p) : p(p) {} //!< doesn't set connected_faces
 };
 
 /*! A MeshFace is a 3 dimensional model triangle with 3 points. These points are already converted to integers
@@ -57,13 +54,12 @@ See MeshFace for the specifics of how/when faces are connected.
 class Mesh : public SettingsBase // inherits settings
 {
     //! The vertex_hash_map stores a index reference of each vertex for the hash of that location. Allows for quick retrieval of points with the same location.
-    std::unordered_map<uint32_t, std::vector<uint32_t> > vertex_hash_map;
-    AABB3D aabb;
+    std::map<uint32_t, std::vector<uint32_t> > vertex_hash_map;
 public:
     std::vector<MeshVertex> vertices;//!< list of all vertices in the mesh
     std::vector<MeshFace> faces; //!< list of all faces in the mesh
 
-    Mesh(SettingsBaseVirtual* parent); //!< initializes the settings
+    Mesh(SettingsBase* parent); //!< initializes the settings
 
     void addFace(Point3& v0, Point3& v1, Point3& v2); //!< add a face to the mesh without settings it's connected_faces.
     void clear(); //!< clears all data
@@ -71,18 +67,6 @@ public:
 
     Point3 min(); //!< min (in x,y and z) vertex of the bounding box
     Point3 max(); //!< max (in x,y and z) vertex of the bounding box
-    
-    /*!
-     * Offset the whole mesh (all vertices and the bounding box).
-     * \param offset The offset byu which to offset the whole mesh.
-     */
-    void offset(Point3 offset)
-    {
-        if (offset == Point3(0,0,0)) { return; }
-        for(MeshVertex& v : vertices)
-            v.p += offset;
-        aabb.offset(offset);
-    }
 
 private:
     int findIndexOfVertex(Point3& v); //!< find index of vertex close to the given point, or create a new vertex and return its index.
@@ -93,6 +77,6 @@ private:
     int getFaceIdxWithPoints(int idx0, int idx1, int notFaceIdx);
 };
 
-}//namespace cura
+
 #endif//MESH_H
 

src/modelFile/modelFile.cpp

@@ -3,12 +3,9 @@
 #include <strings.h>
 #include <stdio.h>
 
-#include "MeshGroup.h"
-#include "utils/logoutput.h"
-#include "utils/string.h"
-
-namespace cura
-{
+#include "modelFile.h"
+#include "../utils/logoutput.h"
+#include "../utils/string.h"
 
 FILE* binaryMeshBlob = nullptr;
 
@@ -28,7 +25,7 @@ void* fgets_(char* ptr, size_t len, FILE* f)
     return nullptr;
 }
 
-bool loadMeshSTL_ascii(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
+bool loadModelSTL_ascii(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
 {
     FILE* f = fopen(filename, "rt");
     char buffer[1024];
@@ -61,7 +58,7 @@ bool loadMeshSTL_ascii(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
     return true;
 }
 
-bool loadMeshSTL_binary(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
+bool loadModelSTL_binary(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
 {
     FILE* f = fopen(filename, "rb");
     char buffer[80];
@@ -80,29 +77,35 @@ bool loadMeshSTL_binary(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
     }
     //For each face read:
     //float(x,y,z) = normal, float(X,Y,Z)*3 = vertexes, uint16_t = flags
-    // Every Face is 50 Bytes: Normal(3*float), Vertices(9*float), 2 Bytes Spacer
-    mesh->faces.reserve(faceCount);
-    mesh->vertices.reserve(faceCount);
     for(unsigned int i=0;i<faceCount;i++)
     {
-        if (fread(buffer, 50, 1, f) != 1)
+        if (fread(buffer, sizeof(float) * 3, 1, f) != 1)
+        {
+            fclose(f);
+            return false;
+        }
+        float v[9];
+        if (fread(v, sizeof(float) * 9, 1, f) != 1)
         {
             fclose(f);
             return false;
         }
-        float *v= ((float*)buffer)+3;
-
         Point3 v0 = matrix.apply(FPoint3(v[0], v[1], v[2]));
         Point3 v1 = matrix.apply(FPoint3(v[3], v[4], v[5]));
         Point3 v2 = matrix.apply(FPoint3(v[6], v[7], v[8]));
         mesh->addFace(v0, v1, v2);
+        if (fread(buffer, sizeof(uint16_t), 1, f) != 1)
+        {
+            fclose(f);
+            return false;
+        }
     }
     fclose(f);
     mesh->finish();
     return true;
 }
 
-bool loadMeshSTL(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
+bool loadModelSTL(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
 {
     FILE* f = fopen(filename, "r");
     char buffer[6];
@@ -119,7 +122,7 @@ bool loadMeshSTL(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
     buffer[5] = '\0';
     if (stringcasecompare(buffer, "solid") == 0)
     {
-        bool load_success = loadMeshSTL_ascii(mesh, filename, matrix);
+        bool load_success = loadModelSTL_ascii(mesh, filename, matrix);
         if (!load_success)
             return false;
 
@@ -128,26 +131,20 @@ bool loadMeshSTL(Mesh* mesh, const char* filename, FMatrix3x3& matrix)
         if (mesh->faces.size() < 1)
         {
             mesh->clear();
-            return loadMeshSTL_binary(mesh, filename, matrix);
+            return loadModelSTL_binary(mesh, filename, matrix);
         }
         return true;
     }
-    return loadMeshSTL_binary(mesh, filename, matrix);
+    return loadModelSTL_binary(mesh, filename, matrix);
 }
 
-bool loadMeshIntoMeshGroup(MeshGroup* meshgroup, const char* filename, FMatrix3x3& transformation, SettingsBaseVirtual* object_parent_settings)
+bool loadMeshFromFile(PrintObject* object, const char* filename, FMatrix3x3& matrix)
 {
     const char* ext = strrchr(filename, '.');
     if (ext && (strcmp(ext, ".stl") == 0 || strcmp(ext, ".STL") == 0))
     {
-        Mesh mesh = object_parent_settings ? Mesh(object_parent_settings) : Mesh(meshgroup); //If we have object_parent_settings, use them as parent settings. Otherwise, just use meshgroup.
-        if(loadMeshSTL(&mesh,filename,transformation)) //Load it! If successful...
-        {
-            meshgroup->meshes.push_back(mesh);
-            return true;
-        }
+        object->meshes.emplace_back(object);
+        return loadModelSTL(&object->meshes[object->meshes.size()-1], filename, matrix);
     }
     return false;
 }
-
-}//namespace cura

src/modelFile/modelFile.h

@@ -0,0 +1,98 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef MODELFILE_H
+#define MODELFILE_H
+/**
+modelFile contains the model loaders for the slicer. The model loader turns any format that it can read into a list of triangles with 3 X/Y/Z points.
+
+The format returned is a Model class with an array of faces, which have integer points with a resolution of 1 micron. Giving a maximum object size of 4 meters.
+**/
+
+#include "../mesh.h"
+
+//A PrintObject is a 3D model with 1 or more 3D meshes.
+class PrintObject : public SettingsBase
+{
+public:
+    std::vector<Mesh> meshes;
+
+    PrintObject(SettingsBase* settings_base)
+    : SettingsBase(settings_base)
+    {
+    }
+
+    Point3 min() //! minimal corner of bounding box
+    {
+        if (meshes.size() < 1)
+            return Point3(0, 0, 0);
+        Point3 ret = meshes[0].min();
+        for(unsigned int i=1; i<meshes.size(); i++)
+        {
+            Point3 v = meshes[i].min();
+            ret.x = std::min(ret.x, v.x);
+            ret.y = std::min(ret.y, v.y);
+            ret.z = std::min(ret.z, v.z);
+        }
+        return ret;
+    }
+    Point3 max() //! maximal corner of bounding box
+    {
+        if (meshes.size() < 1)
+            return Point3(0, 0, 0);
+        Point3 ret = meshes[0].max();
+        for(unsigned int i=1; i<meshes.size(); i++)
+        {
+            Point3 v = meshes[i].max();
+            ret.x = std::max(ret.x, v.x);
+            ret.y = std::max(ret.y, v.y);
+            ret.z = std::max(ret.z, v.z);
+        }
+        return ret;
+    }
+
+    void clear()
+    {
+        for(Mesh& m : meshes)
+            m.clear();
+    }
+
+    void offset(Point3 offset)
+    {
+        for(Mesh& m : meshes)
+            for(MeshVertex& v : m.vertices)
+                v.p += offset;
+    }
+
+    void finalize()
+    {
+        // If a mesh position was given, put the mesh at this position in 3D space.
+        if (hasSetting("mesh_position_x") || hasSetting("mesh_position_y") || hasSetting("mesh_position_z"))
+        {
+            Point3 object_min = min();
+            Point3 object_max = max();
+            Point3 object_size = object_max - object_min;
+            Point3 object_offset = Point3(-object_min.x - object_size.x / 2, -object_min.y - object_size.y / 2, -object_min.z);
+            if (hasSetting("mesh_position_x"))
+                object_offset.x += getSettingInMicrons("mesh_position_x");
+            if (hasSetting("mesh_position_y"))
+                object_offset.y += getSettingInMicrons("mesh_position_y");
+            if (hasSetting("mesh_position_z"))
+                object_offset.z += getSettingInMicrons("mesh_position_z");
+            offset(object_offset);
+        }
+
+        //If the machine settings have been supplied, offset the given position vertices to the center of vertices (0,0,0) is at the bed center.
+        if (hasSetting("machine_center_is_zero") && !getSettingBoolean("machine_center_is_zero"))
+        {
+            Point3 object_offset = Point3(0, 0, 0);
+            if (hasSetting("machine_width"))
+                object_offset.x = getSettingInMicrons("machine_width") / 2;
+            if (hasSetting("machine_depth"))
+                object_offset.y = getSettingInMicrons("machine_depth") / 2;
+            offset(object_offset);
+        }
+    }
+};
+
+bool loadMeshFromFile(PrintObject* object, const char* filename, FMatrix3x3& matrix);
+
+#endif//MODELFILE_H

src/multiVolumes.cpp

@@ -1,48 +1,58 @@
 #include "multiVolumes.h"
 
-namespace cura 
-{
- 
-void carveMultipleVolumes(std::vector<Slicer*> &volumes)
+namespace cura {
+
+void carveMultipleVolumes(std::vector<SliceMeshStorage> &volumes)
 {
     //Go trough all the volumes, and remove the previous volume outlines from our own outline, so we never have overlapped areas.
     for(unsigned int idx=0; idx < volumes.size(); idx++)
     {
         for(unsigned int idx2=0; idx2<idx; idx2++)
         {
-            for(unsigned int layerNr=0; layerNr < volumes[idx]->layers.size(); layerNr++)
+            for(unsigned int layerNr=0; layerNr < volumes[idx].layers.size(); layerNr++)
             {
-                SlicerLayer& layer1 = volumes[idx]->layers[layerNr];
-                SlicerLayer& layer2 = volumes[idx2]->layers[layerNr];
-                layer1.polygonList = layer1.polygonList.difference(layer2.polygonList);
+                SliceLayer* layer1 = &volumes[idx].layers[layerNr];
+                SliceLayer* layer2 = &volumes[idx2].layers[layerNr];
+                for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
+                {
+                    for(unsigned int p2 = 0; p2 < layer2->parts.size(); p2++)
+                    {
+                        layer1->parts[p1].outline = layer1->parts[p1].outline.difference(layer2->parts[p2].outline);
+                    }
+                }
             }
         }
     }
 }
- 
+
 //Expand each layer a bit and then keep the extra overlapping parts that overlap with other volumes.
 //This generates some overlap in dual extrusion, for better bonding in touching parts.
-void generateMultipleVolumesOverlap(std::vector<Slicer*> &volumes, int overlap)
+void generateMultipleVolumesOverlap(std::vector<SliceMeshStorage> &volumes, int overlap)
 {
     if (volumes.size() < 2 || overlap <= 0) return;
     
-    for(unsigned int layerNr=0; layerNr < volumes[0]->layers.size(); layerNr++)
+    for(unsigned int layerNr=0; layerNr < volumes[0].layers.size(); layerNr++)
     {
         Polygons fullLayer;
         for(unsigned int volIdx = 0; volIdx < volumes.size(); volIdx++)
         {
-            SlicerLayer& layer1 = volumes[volIdx]->layers[layerNr];
-            fullLayer = fullLayer.unionPolygons(layer1.polygonList.offset(20)); // TODO: put hard coded value in a variable with an explanatory name (and make var a parameter, and perhaps even a setting?)
+            SliceLayer* layer1 = &volumes[volIdx].layers[layerNr];
+            for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
+            {
+                fullLayer = fullLayer.unionPolygons(layer1->parts[p1].outline.offset(20)); // TODO: put hard coded value in a variable with an explanatory name (and make var a parameter, and perhaps even a setting?)
+            }
         }
         fullLayer = fullLayer.offset(-20); // TODO: put hard coded value in a variable with an explanatory name (and make var a parameter, and perhaps even a setting?)
         
         for(unsigned int volIdx = 0; volIdx < volumes.size(); volIdx++)
         {
-            SlicerLayer& layer1 = volumes[volIdx]->layers[layerNr];
-            layer1.polygonList = fullLayer.intersection(layer1.polygonList.offset(overlap / 2));
+            SliceLayer* layer1 = &volumes[volIdx].layers[layerNr];
+            for(unsigned int p1 = 0; p1 < layer1->parts.size(); p1++)
+            {
+                layer1->parts[p1].outline = fullLayer.intersection(layer1->parts[p1].outline.offset(overlap / 2));
+            }
         }
     }
 }
  
-
 }//namespace cura

src/multiVolumes.h

@@ -2,18 +2,15 @@
 #define MULTIVOLUMES_H
 
 #include "sliceDataStorage.h"
-#include "slicer.h"
 
 /* This file contains code to help fixing up and changing layers that are build from multiple volumes. */
 namespace cura {
 
-void carveMultipleVolumes(std::vector<Slicer*> &meshes);
+void carveMultipleVolumes(std::vector<SliceMeshStorage> &meshes);
 
-/*!
- * Expand each layer a bit and then keep the extra overlapping parts that overlap with other volumes.
- * This generates some overlap in dual extrusion, for better bonding in touching parts.
- */
-void generateMultipleVolumesOverlap(std::vector<Slicer*> &meshes, int overlap);
+//Expand each layer a bit and then keep the extra overlapping parts that overlap with other volumes.
+//This generates some overlap in dual extrusion, for better bonding in touching parts.
+void generateMultipleVolumesOverlap(std::vector<SliceMeshStorage> &meshes, int overlap);
 
 }//namespace cura
 

src/pathOrderOptimizer.cpp

@@ -1,4 +1,6 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include <map>
+
 #include "pathOrderOptimizer.h"
 #include "utils/logoutput.h"
 #include "utils/BucketGrid2D.h"
@@ -76,30 +78,18 @@ void PathOrderOptimizer::optimize()
     prev_point = startPoint;
     for(unsigned int n=0; n<polyOrder.size(); n++) /// decide final starting points in each polygon
     {
-        int poly_idx = polyOrder[n];
-        int point_idx = getPolyStart(prev_point, poly_idx);
-        polyStart[poly_idx] = point_idx;
-        prev_point = polygons[poly_idx][point_idx];
+        int i_polygon = polyOrder[n];
+        int best = getClosestPointInPolygon(prev_point, i_polygon);
+        polyStart[i_polygon] = best;
+        prev_point = polygons[i_polygon][best];
 
     }
 }
 
-int PathOrderOptimizer::getPolyStart(Point prev_point, int poly_idx)
+inline int PathOrderOptimizer::getClosestPointInPolygon(Point prev_point, int i_polygon)
 {
-    switch (type)
-    {
-        case EZSeamType::BACK:      return getFarthestPointInPolygon(poly_idx); 
-        case EZSeamType::RANDOM:    return getRandomPointInPolygon(poly_idx); 
-        case EZSeamType::SHORTEST:  return getClosestPointInPolygon(prev_point, poly_idx);
-        default:                    return getClosestPointInPolygon(prev_point, poly_idx);
-    }
-}
-
-
-int PathOrderOptimizer::getClosestPointInPolygon(Point prev_point, int poly_idx)
-{
-    PolygonRef poly = polygons[poly_idx];
-    int best_point_idx = -1;
+    PolygonRef poly = polygons[i_polygon];
+    int best = -1;
     float bestDist = std::numeric_limits<float>::infinity();
     bool orientation = poly.orientation();
     for(unsigned int i_point=0 ; i_point<poly.size() ; i_point++)
@@ -112,33 +102,11 @@ int PathOrderOptimizer::getClosestPointInPolygon(Point prev_point, int poly_idx)
             dot_score = -dot_score;
         if (dist + dot_score < bestDist)
         {
-            best_point_idx = i_point;
+            best = i_point;
             bestDist = dist;
         }
     }
-    return best_point_idx;
-}
-
-int PathOrderOptimizer::getRandomPointInPolygon(int poly_idx)
-{
-    return rand() % polygons[poly_idx].size();
-}
-
-
-int PathOrderOptimizer::getFarthestPointInPolygon(int poly_idx)
-{
-    PolygonRef poly = polygons[poly_idx];
-    int best_point_idx = -1;
-    float best_y = std::numeric_limits<float>::min();
-    for(unsigned int point_idx=0 ; point_idx<poly.size() ; point_idx++)
-    {
-        if (poly[point_idx].Y > best_y)
-        {
-            best_point_idx = point_idx;
-            best_y = poly[point_idx].Y;
-        }
-    }
-    return best_point_idx;
+    return best;
 }
 
 

src/pathOrderOptimizer.h

@@ -4,29 +4,25 @@
 
 #include <stdint.h>
 #include "utils/polygon.h"
-#include "settings.h"
 
 namespace cura {
- 
+
+//! Parts order optimization class.
 /*!
- * Parts order optimization class.
- * 
- * Utility class for optimizing the path order by minimizing the distance traveled between printing different parts in the layer.
- * The order of polygons is optimized and the startingpoint within each polygon is chosen.
- */
+* Utility class for optimizing the path order by minimizing the distance traveled between printing different parts in the layer.
+* The order of polygons is optimized and the startingpoint within each polygon is chosen.
+*/
 class PathOrderOptimizer
 {
 public:
-    EZSeamType type;
     Point startPoint; //!< The location of the nozzle before starting to print the current layer
     std::vector<PolygonRef> polygons; //!< the parts of the layer (in arbitrary order)
     std::vector<int> polyStart; //!< polygons[i][polyStart[i]] = point of polygon i which is to be the starting point in printing the polygon
     std::vector<int> polyOrder; //!< the optimized order as indices in #polygons
 
-    PathOrderOptimizer(Point startPoint, EZSeamType type = EZSeamType::SHORTEST)
-    : type(type)
-    , startPoint(startPoint)
+    PathOrderOptimizer(Point startPoint)
     {
+        this->startPoint = startPoint;
     }
 
     void addPolygon(PolygonRef polygon)
@@ -42,11 +38,8 @@ public:
 
     void optimize(); //!< sets #polyStart and #polyOrder
 
-private:
-    int getPolyStart(Point prev_point, int poly_idx);
-    int getClosestPointInPolygon(Point prev, int i_polygon); //!< returns the index of the closest point
-    int getFarthestPointInPolygon(int poly_idx); //!< return the index to the point farthest from the front (highest y)
-    int getRandomPointInPolygon(int poly_idx);
+    private:
+        int getClosestPointInPolygon(Point prev, int i_polygon); //!< returns the index of the closest point
 
 
 };

src/polygonOptimizer.cpp

@@ -0,0 +1,54 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#include "polygonOptimizer.h"
+
+namespace cura {
+
+void optimizePolygon(PolygonRef poly)
+{
+    Point p0 = poly[poly.size()-1];
+    for(unsigned int i=0;i<poly.size();i++)
+    {
+        Point p1 = poly[i];
+        if (shorterThen(p0 - p1, MICRON2INT(10)))
+        {
+            poly.remove(i);
+            i --;
+        }else if (shorterThen(p0 - p1, MICRON2INT(500)))
+        {
+            Point p2;
+            if (i < poly.size() - 1)
+                p2 = poly[i+1];
+            else
+                p2 = poly[0];
+            
+            Point diff0 = normal(p1 - p0, 10000000);
+            Point diff2 = normal(p1 - p2, 10000000);
+            
+            int64_t d = dot(diff0, diff2);
+            if (d < -99999999999999LL)
+            {
+                poly.remove(i);
+                i --;
+            }else{
+                p0 = p1;
+            }
+        }else{
+            p0 = p1;
+        }
+    }
+}
+
+void optimizePolygons(Polygons& polys)
+{
+    for(unsigned int n=0;n<polys.size();n++)
+    {
+        optimizePolygon(polys[n]);
+        if (polys[n].size() < 3)
+        {
+            polys.remove(n);
+            n--;
+        }
+    }
+}
+
+}//namespace cura

src/polygonOptimizer.h

@@ -0,0 +1,15 @@
+/** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
+#ifndef POLYGON_OPTIMIZER_H
+#define POLYGON_OPTIMIZER_H
+
+#include "utils/polygon.h"
+
+namespace cura {
+
+void optimizePolygon(PolygonRef poly);
+
+void optimizePolygons(Polygons& polys);
+
+}//namespace cura
+
+#endif//POLYGON_OPTIMIZER_H

src/raft.cpp

@@ -6,18 +6,19 @@ namespace cura {
 
 void generateRaft(SliceDataStorage& storage, int distance)
 {
-    if (storage.draft_protection_shield.size() > 0)
+    for(SliceMeshStorage& mesh : storage.meshes)
     {
-        storage.raftOutline = storage.raftOutline.unionPolygons(storage.draft_protection_shield.offset(distance));
-    }
-    else if (storage.oozeShield.size() > 0 && storage.oozeShield[0].size() > 0)
-    {
-        storage.raftOutline = storage.raftOutline.unionPolygons(storage.oozeShield[0].offset(distance));
-    }
-    else 
-    {
-        storage.raftOutline = storage.getLayerOutlines(0, true).offset(distance);
+        if (mesh.layers.size() < 1) continue;
+        SliceLayer* layer = &mesh.layers[0];
+        for(SliceLayerPart& part : layer->parts)
+            storage.raftOutline = storage.raftOutline.unionPolygons(part.outline.offset(distance));
     }
+
+    Polygons support;
+    if (storage.support.generated) 
+        support = storage.support.supportAreasPerLayer[0];
+    storage.raftOutline = storage.raftOutline.unionPolygons(support.offset(distance));
+    storage.raftOutline = storage.raftOutline.unionPolygons(storage.wipeTower.offset(distance));
 }
 
 }//namespace cura

src/settingRegistry.cpp

@@ -1,91 +1,27 @@
 #include "settingRegistry.h"
 
 #include <sstream>
-#include <iostream> // debug IO
-#include <libgen.h> // dirname
-#include <string>
-#include <algorithm> // find_if
-
 #include "utils/logoutput.h"
 
 #include "rapidjson/rapidjson.h"
 #include "rapidjson/document.h"
 #include "rapidjson/error/en.h"
 #include "rapidjson/filereadstream.h"
-#include "utils/logoutput.h"
 
-namespace cura
-{
-    
 SettingRegistry SettingRegistry::instance; // define settingRegistry
 
-std::string SettingRegistry::toString(rapidjson::Type type)
-{
-    switch (type)
-    {
-        case rapidjson::Type::kNullType: return "null";
-        case rapidjson::Type::kFalseType: return "false";
-        case rapidjson::Type::kTrueType: return "true";
-        case rapidjson::Type::kObjectType: return "object";
-        case rapidjson::Type::kArrayType: return "array";
-        case rapidjson::Type::kStringType: return "string";
-        case rapidjson::Type::kNumberType: return "number";
-        default: return "Unknown";
-    }
-}
-
-
-SettingContainer::SettingContainer(std::string key, std::string label)
-: key(key)
-, label(label)
-{
-}
-
-SettingConfig* SettingContainer::addChild(std::string key, std::string label)
-{
-    children.emplace_back(key, label, nullptr);
-    return &children.back();
-}
-
-SettingConfig::SettingConfig(std::string key, std::string label, SettingContainer* parent)
-: SettingContainer(key, label)
-, parent(parent)
-{
-//     std::cerr << key << std::endl; // debug output to show all frontend registered settings...
-}
-
-void SettingContainer::debugOutputAllSettings()
-{
-    std::cerr << "CATEGORY: " << key << std::endl;
-    for (SettingConfig& child : children)
-    {
-        child.debugOutputAllSettings();
-    }
-}
-
-
 bool SettingRegistry::settingExists(std::string key) const
 {
     return settings.find(key) != settings.end();
 }
 
-SettingConfig* SettingRegistry::getSettingConfig(std::string key)
+const SettingConfig* SettingRegistry::getSettingConfig(std::string key)
 {
-    auto it = settings.find(key);
-    if (it == settings.end())
+    if (settings.find(key) == settings.end())
         return nullptr;
-    return it->second;
+    return settings[key];
 }
 
-SettingContainer* SettingRegistry::getCategory(std::string key)
-{
-    for (SettingContainer& cat : categories)
-        if (cat.getKey().compare(key) == 0)
-            return &cat;
-    return nullptr;
-}
-
-
 SettingRegistry::SettingRegistry()
 {
 }
@@ -95,250 +31,184 @@ bool SettingRegistry::settingsLoaded()
     return settings.size() > 0;
 }
 
-int SettingRegistry::loadJSON(std::string filename, rapidjson::Document& json_document)
-{
-    FILE* f = fopen(filename.c_str(), "rb");
-    if (!f)
-    {
-        cura::logError("Couldn't open JSON file.\n");
-        return 1;
-    }
-    char read_buffer[4096];
-    rapidjson::FileReadStream reader_stream(f, read_buffer, sizeof(read_buffer));
-    json_document.ParseStream(reader_stream);
-    fclose(f);
-    if (json_document.HasParseError())
-    {
-        cura::logError("Error parsing JSON(offset %u): %s\n", (unsigned)json_document.GetErrorOffset(), GetParseError_En(json_document.GetParseError()));
-        return 2;
-    }
-    
-    return 0;
-}
-
-int SettingRegistry::loadJSONsettings(std::string filename)
+bool SettingRegistry::loadJSON(std::string filename)
 {
     rapidjson::Document json_document;
     
-    int err = loadJSON(filename, json_document);
-    if (err) { return err; }
-    
-    if (json_document.HasMember("inherits"))
     {
-        std::string filename_copy = std::string(filename.c_str()); // copy the string because dirname(.) changes the input string!!!
-        char* filename_cstr = (char*)filename_copy.c_str();
-        int err = loadJSONsettings(std::string(dirname(filename_cstr)) + std::string("/") + json_document["inherits"].GetString());
-        if (err) { return err; }
-        return loadJSONsettingsFromDoc(json_document, false);
+        FILE* f = fopen(filename.c_str(), "rb");
+        if (!f)
+        {
+            return false;
+        }
+        char read_buffer[4096];
+        rapidjson::FileReadStream reader_stream(f, read_buffer, sizeof(read_buffer));
+        json_document.ParseStream(reader_stream);
+        fclose(f);
+        if (json_document.HasParseError())
+        {
+            cura::logError("Error(offset %u): %s\n", (unsigned)json_document.GetErrorOffset(), GetParseError_En(json_document.GetParseError()));
+            return false;
+        }
     }
-    else 
-    {
-        return loadJSONsettingsFromDoc(json_document, true);
-    }
-    
-}
 
-int SettingRegistry::loadJSONsettingsFromDoc(rapidjson::Document& json_document, bool warn_duplicates)
-{
-    
     if (!json_document.IsObject())
     {
-        cura::logError("JSON file is not an object.\n");
-        return 3;
+        return false;
+    }
+    if (!json_document.HasMember("categories"))
+    {
+        return false;
     }
 
-    if (json_document.HasMember("machine_extruder_trains"))
-    {
-        categories.emplace_back("machine_extruder_trains", "Extruder Trains Settings Objects");
-        SettingContainer* category_trains = &categories.back();
-        const rapidjson::Value& trains = json_document["machine_extruder_trains"];
-        if (trains.IsArray()) 
-        {
-            if (trains.Size() > 0 && trains[0].IsObject())
-            {
-                unsigned int idx = 0;
-                for (auto it = trains.Begin(); it != trains.End(); ++it)
-                {
-                    SettingConfig* child = category_trains->addChild(std::to_string(idx), std::to_string(idx));
-                    
-                    for (rapidjson::Value::ConstMemberIterator setting_iterator = it->MemberBegin(); setting_iterator != it->MemberEnd(); ++setting_iterator)
-                    {
-                        _addSettingToContainer(child, setting_iterator, warn_duplicates, false);
-                    }
-                    
-                    idx++;
-                }
-            }
-        }
-        else 
-        {
-            logError("Error: JSON machine_extruder_trains is not an array!\n");
-        }
-    }
-    if (json_document.HasMember("machine_settings"))
-    {
-        categories.emplace_back("machine_settings", "Machine Settings");
-        SettingContainer* category_machine_settings = &categories.back();
-        
-        const rapidjson::Value& json_object_container = json_document["machine_settings"];
-        for (rapidjson::Value::ConstMemberIterator setting_iterator = json_object_container.MemberBegin(); setting_iterator != json_object_container.MemberEnd(); ++setting_iterator)
-        {
-            _addSettingToContainer(category_machine_settings, setting_iterator, warn_duplicates);
-        }
-    }
+    categories.emplace_back("machine_settings", "Machine Settings");
+    SettingCategory* category_machine_settings = &categories.back();
+    _addSettingsToCategory(category_machine_settings, json_document["machine_settings"], NULL);
     
-    if (json_document.HasMember("categories"))
+    categories.emplace_back("mesh_settings", "TEMPORARY");
+    SettingCategory* category_mesh_settings = &categories.back();
     {
-        for (rapidjson::Value::ConstMemberIterator category_iterator = json_document["categories"].MemberBegin(); category_iterator != json_document["categories"].MemberEnd(); ++category_iterator)
+        SettingConfig* config = category_mesh_settings->addChild("mesh_position_x", "mesh_position_x");
+        config->setDefault("0");
+        if (settingExists(config->getKey()))
         {
-            if (!category_iterator->value.IsObject())
-            {
-                continue;
-            }
-            if (!category_iterator->value.HasMember("settings") || !category_iterator->value["settings"].IsObject())
-            {
-                continue;
-            }
-            std::string cat_name = category_iterator->name.GetString();
-            std::list<SettingContainer>::iterator category_found = std::find_if(categories.begin(), categories.end(), [&cat_name](SettingContainer& cat) { return cat.getKey().compare(cat_name) == 0; });
-            if (category_found != categories.end())
-            { // category is already present; add settings to category
-                SettingContainer* category = &*category_found;
-
-                const rapidjson::Value& json_object_container = category_iterator->value["settings"];
-                for (rapidjson::Value::ConstMemberIterator setting_iterator = json_object_container.MemberBegin(); setting_iterator != json_object_container.MemberEnd(); ++setting_iterator)
-                {
-                    _addSettingToContainer(category, setting_iterator, warn_duplicates);
-                }
-            }
-            else 
-            {
-                if (!category_iterator->value.HasMember("label") || !category_iterator->value["label"].IsString())
-                {
-                    continue;
-                }
-                categories.emplace_back(cat_name, category_iterator->value["label"].GetString());
-                SettingContainer* category = &categories.back();
-                
-                const rapidjson::Value& json_object_container = category_iterator->value["settings"];
-                for (rapidjson::Value::ConstMemberIterator setting_iterator = json_object_container.MemberBegin(); setting_iterator != json_object_container.MemberEnd(); ++setting_iterator)
-                {
-                    _addSettingToContainer(category, setting_iterator, warn_duplicates);
-                }
-            }
+            cura::logError("Duplicate definition of setting: %s\n", config->getKey().c_str());
         }
-    }
-    
-    if (json_document.HasMember("overrides"))
-    {
-        const rapidjson::Value& json_object_container = json_document["overrides"];
-        for (rapidjson::Value::ConstMemberIterator override_iterator = json_object_container.MemberBegin(); override_iterator != json_object_container.MemberEnd(); ++override_iterator)
-        {
-            std::string setting = override_iterator->name.GetString();
-            SettingConfig* conf = getSettingConfig(setting);
-            _loadSettingValues(conf, override_iterator, false);
-        }
-    }
-    
-    return 0;
-}
-
-
-void SettingRegistry::_addSettingToContainer(SettingContainer* parent, rapidjson::Value::ConstMemberIterator& json_object_it, bool warn_duplicates, bool add_to_settings)
-{
-    const rapidjson::Value& data = json_object_it->value;
-
-    if (data.HasMember("type") && data["type"].IsString() && 
-        (data["type"].GetString() == std::string("polygon") || data["type"].GetString() == std::string("polygons")))
-    {
-        logWarning("Loading polygon setting %s not implemented...\n", json_object_it->name.GetString());
-        /// When this setting has children, add those children to the parent setting.
-        if (data.HasMember("children") && data["children"].IsObject())
-        {
-            const rapidjson::Value& json_object_container = data["children"];
-            for (rapidjson::Value::ConstMemberIterator setting_iterator = json_object_container.MemberBegin(); setting_iterator != json_object_container.MemberEnd(); ++setting_iterator)
-            {
-                _addSettingToContainer(parent, setting_iterator, warn_duplicates, add_to_settings);
-            }
-        }
-        return;
-    }
-
-    std::string label;
-    if (!json_object_it->value.HasMember("label") || !data["label"].IsString())
-    {
-        label = "N/A";
-    }
-    else
-    {
-        label = data["label"].GetString();
-    }
-
-    /// Create the new setting config object.
-    SettingConfig* config = parent->addChild(json_object_it->name.GetString(), label);
-
-    _loadSettingValues(config, json_object_it, warn_duplicates, add_to_settings);
-}
-
-void SettingRegistry::_loadSettingValues(SettingConfig* config, rapidjson::GenericValue< rapidjson::UTF8< char > >::ConstMemberIterator& json_object_it, bool warn_duplicates, bool add_to_settings)
-{
-    const rapidjson::Value& data = json_object_it->value;
-    /// Fill the setting config object with data we have in the json file.
-    if (data.HasMember("type") && data["type"].IsString())
-    {
-        config->setType(data["type"].GetString());
-    }
-    if (data.HasMember("default"))
-    {
-        const rapidjson::Value& dflt = data["default"];
-        if (dflt.IsString())
-        {
-            config->setDefault(dflt.GetString());
-        }
-        else if (dflt.IsTrue())
-        {
-            config->setDefault("true");
-        }
-        else if (dflt.IsFalse())
-        {
-            config->setDefault("false");
-        }
-        else if (dflt.IsNumber())
-        {
-            std::ostringstream ss;
-            ss << dflt.GetDouble();
-            config->setDefault(ss.str());
-        } // arrays are ignored because machine_extruder_trains needs to be handled separately
-        else 
-        {
-            logError("Unrecognized data type in JSON: %s has type %s\n", json_object_it->name.GetString(), toString(dflt.GetType()).c_str());
-        }
-    }
-    if (data.HasMember("unit") && data["unit"].IsString())
-    {
-        config->setUnit(data["unit"].GetString());
-    }
-
-    /// Register the setting in the settings map lookup.
-    if (warn_duplicates && settingExists(config->getKey()))
-    {
-        cura::logError("Duplicate definition of setting: %s a.k.a. \"%s\" was already claimed by \"%s\"\n", config->getKey().c_str(), config->getLabel().c_str(), getSettingConfig(config->getKey())->getLabel().c_str());
-    }
-
-    if (add_to_settings)
-    {
         settings[config->getKey()] = config;
     }
-
-    /// When this setting has children, add those children to this setting.
-    if (data.HasMember("children") && data["children"].IsObject())
     {
-        const rapidjson::Value& json_object_container = data["children"];
-        for (rapidjson::Value::ConstMemberIterator setting_iterator = json_object_container.MemberBegin(); setting_iterator != json_object_container.MemberEnd(); ++setting_iterator)
+        SettingConfig* config = category_mesh_settings->addChild("mesh_position_y", "mesh_position_y");
+        config->setDefault("0");
+        if (settingExists(config->getKey()))
         {
-            _addSettingToContainer(config, setting_iterator, warn_duplicates, add_to_settings);
+            cura::logError("Duplicate definition of setting: %s\n", config->getKey().c_str());
+        }
+        settings[config->getKey()] = config;
+    }
+    {
+        SettingConfig* config = category_mesh_settings->addChild("mesh_position_z", "mesh_position_z");
+        config->setDefault("0");
+        if (settingExists(config->getKey()))
+        {
+            cura::logError("Duplicate definition of setting: %s\n", config->getKey().c_str());
+        }
+        settings[config->getKey()] = config;
+    }
+    
+    
+    for (rapidjson::Value::ConstMemberIterator category_iterator = json_document["categories"].MemberBegin(); category_iterator != json_document["categories"].MemberEnd(); ++category_iterator)
+    {
+        if (!category_iterator->value.IsObject())
+        {
+            continue;
+        }
+        if (!category_iterator->value.HasMember("label") || !category_iterator->value["label"].IsString())
+        {
+            continue;
+        }
+        if (!category_iterator->value.HasMember("settings") || !category_iterator->value["settings"].IsObject())
+        {
+            continue;
+        }
+        
+        categories.emplace_back(category_iterator->name.GetString(), category_iterator->value["label"].GetString());
+        SettingCategory* category = &categories.back();
+        
+        _addSettingsToCategory(category, category_iterator->value["settings"], NULL);
+    }
+    
+    
+    return true;
+}
+
+void SettingRegistry::_addSettingsToCategory(SettingCategory* category, const rapidjson::Value& json_object, SettingConfig* parent)
+{
+    for (rapidjson::Value::ConstMemberIterator setting_iterator = json_object.MemberBegin(); setting_iterator != json_object.MemberEnd(); ++setting_iterator)
+    {
+        const rapidjson::Value& data = setting_iterator->value;
+        
+        std::string label;
+        if (!setting_iterator->value.HasMember("label") || !data["label"].IsString())
+        {
+            label = "N/A";
+        }
+        else
+        {
+            label = data["label"].GetString();
+        }
+
+        /// Create the new setting config object.
+        SettingConfig* config;
+        if (parent)
+            config = parent->addChild(setting_iterator->name.GetString(), label);
+        else
+            config = category->addChild(setting_iterator->name.GetString(), label);
+        
+        
+        /// Fill the setting config object with data we have in the json file.
+        if (data.HasMember("type") && data["type"].IsString())
+        {
+            config->setType(data["type"].GetString());
+        }
+        if (data.HasMember("default"))
+        {
+            if (data["default"].IsString())
+            {
+                config->setDefault(data["default"].GetString());
+            }
+            else if (data["default"].IsTrue())
+            {
+                config->setDefault("true");
+            }
+            else if (data["default"].IsFalse())
+            {
+                config->setDefault("false");
+            }
+            else if (data["default"].IsNumber())
+            {
+                std::ostringstream ss;
+                ss << data["default"].GetDouble();
+                config->setDefault(ss.str());
+            }
+        }
+        if (data.HasMember("unit") && data["unit"].IsString())
+        {
+            config->setUnit(data["unit"].GetString());
+        }
+        
+        /// Register the setting in the settings map lookup.
+        if (settingExists(config->getKey()))
+        {
+            cura::logError("Duplicate definition of setting: %s\n", config->getKey().c_str());
+        }
+        settings[config->getKey()] = config;
+
+        /// When this setting has children, add those children to this setting.
+        if (data.HasMember("children") && data["children"].IsObject())
+        {
+            _addSettingsToCategory(category, data["children"], config);
         }
     }
 }
 
-}//namespace cura
+SettingCategory::SettingCategory(std::string key, std::string label)
+: label(label), key(key)
+{
+}
+
+SettingConfig* SettingCategory::addChild(std::string key, std::string label)
+{
+    children.emplace_back(key, label, nullptr);
+    return &children.back();
+}
+
+SettingConfig::SettingConfig(std::string key, std::string label, SettingConfig* parent)
+: label(label), key(key), parent(parent)
+{
+}
+
+SettingConfig* SettingConfig::addChild(std::string key, std::string label)
+{
+    children.emplace_back(key, label, this);
+    return &children.back();
+}

src/settingRegistry.h

@@ -3,16 +3,11 @@
 
 #include <vector>
 #include <list>
-#include <unordered_map>
+#include <map>
 #include <string>
-#include <iostream> // debug out
 
-#include "utils/NoCopy.h"
 #include "rapidjson/document.h"
 
-namespace cura
-{
-    
 // Forward declaration
 class SettingConfig;
 
@@ -20,41 +15,16 @@ class SettingConfig;
  * Setting category.
  * Filled from the fdmprinter.json file. Contains one or more children settings.
  */
-class SettingContainer
+class SettingCategory
 {
-    friend class SettingConfig;
 private:
-    std::string key;
     std::string label;
+    std::string key;
     std::list<SettingConfig> children;
 public:
-    std::string getKey() const { return key; }
-    std::string getLabel() const { return label; }
-    SettingContainer(std::string key, std::string label);
+    SettingCategory(std::string key, std::string label);
     
     SettingConfig* addChild(std::string key, std::string label);
-    
-    /*!
-     * Get the \p idx th child.
-     * 
-     * This is used to get a specific extruder train in Settingsbase::setExtruderTrainDefaults
-     * 
-     * \param idx The index in the list of children
-     * \return The \p idx th child
-     */
-    const SettingConfig* getChild(unsigned int idx) const
-    {
-        if (idx < children.size())
-        {
-            auto it = children.begin();
-            while (idx > 0) { ++it; idx--; }
-            return &*it;
-        }
-        else 
-            return nullptr;
-    }
-    
-    void debugOutputAllSettings();
 };
 
 /*!
@@ -62,24 +32,20 @@ public:
  * Filled from the fdmprinter.json file. Can contain child settings, and is registered in the
  * setting registry with it's key.
  */
-class SettingConfig : public SettingContainer
+class SettingConfig
 {
 private:
+    std::string label;
+    std::string key;
     std::string type;
     std::string default_value;
     std::string unit;
-    SettingContainer* parent;
+    SettingConfig* parent;
+    std::list<SettingConfig> children;
 public:
-    SettingConfig(std::string key, std::string label, SettingContainer* parent);
-    
-    /*!
-     * Get the SettingConfig::children.
-     * 
-     * This is used to get the extruder trains; see Settingsbase::setExtruderTrainDefaults
-     * 
-     * \return SettingConfig::children
-     */
-    const std::list<SettingConfig>& getChildren() const { return children; }
+    SettingConfig(std::string key, std::string label, SettingConfig* parent);
+
+    SettingConfig* addChild(std::string key, std::string label);
     
     std::string getKey() const
     {
@@ -115,15 +81,6 @@ public:
     {
         return unit;
     }
-    
-    void debugOutputAllSettings()
-    {
-        std::cerr << key << std::endl;
-        for (SettingConfig& child : children)
-        {
-            child.debugOutputAllSettings();
-        }
-    }
 };
 
 /*!
@@ -132,94 +89,25 @@ public:
  * This registry contains all known setting keys.
  * The registry also contains the settings categories to build up the setting hiarcy from the json file.
  */
-class SettingRegistry : NoCopy
+class SettingRegistry
 {
 private:
     static SettingRegistry instance;
 
-    SettingRegistry();
-    
-    std::unordered_map<std::string, SettingConfig*> settings;
-    std::list<SettingContainer> categories;
+    std::map<std::string, SettingConfig*> settings;
+    std::list<SettingCategory> categories;
 public:
-    /*!
-     * Get the SettingRegistry.
-     * 
-     * This is a singleton class.
-     * 
-     * \return The SettingRegistry
-     */
     static SettingRegistry* getInstance() { return &instance; }
     
     bool settingExists(std::string key) const;
-    SettingConfig* getSettingConfig(std::string key);
-    
-    /*!
-     * Return the first category with the given key as name, or a null pointer.
-     * 
-     * \param key the key as it is in the JSON file
-     * \return The first category in the list having the \p key
-     */
-    SettingContainer* getCategory(std::string key);
+    const SettingConfig* getSettingConfig(std::string key);
     
     bool settingsLoaded();
-    /*!
-     * Load settings from a json file and all the parents it inherits from.
-     * 
-     * Uses recursion to load the parent json file.
-     * 
-     * \param filename The filename of the json file to parse
-     * \return an error code or zero of succeeded
-     */
-    int loadJSONsettings(std::string filename);
-    void debugOutputAllSettings()
-    {
-        for (SettingContainer& cat : categories)
-        {
-            cat.debugOutputAllSettings();
-        }
-    }
-    
+    bool loadJSON(std::string filename);
 private:
+    SettingRegistry();
     
-    /*!
-     * \param type type to convert to string
-     * \return human readable version of json type
-     */
-    static std::string toString(rapidjson::Type type);
-    /*!
-     * Load a json document.
-     * 
-     * \param filename The filename of the json file to parse
-     * \param json_document (output) the document to be loaded
-     * \return an error code or zero of succeeded
-     */
-    int loadJSON(std::string filename, rapidjson::Document& json_document);
-    
-    /*!
-     * Load settings from a single json file.
-     * 
-     * \param filename The filename of the json file to parse
-     * \param warn_duplicates whether to warn for duplicate definitions
-     * \return an error code or zero of succeeded
-     */
-    int loadJSONsettingsFromDoc(rapidjson::Document& json_document, bool warn_duplicates);
-    
-    /*!
-     * Get the string from a json value (generally the default value field of a setting)
-     * \param dflt The value to convert to string
-     * \param setting_name The name of the setting (in case we need to display an error message)
-     * \return The string
-     */
-    static std::string toString(const rapidjson::Value& dflt, std::string setting_name = "?");
-    
-    /*!
-     * \param warn_duplicates whether to warn for duplicate definitions
-     */
-    void _addSettingToContainer(SettingContainer* parent, rapidjson::Value::ConstMemberIterator& json_object_it, bool warn_duplicates, bool add_to_settings = true);
-    
-    void _loadSettingValues(SettingConfig* config, rapidjson::Value::ConstMemberIterator& json_object_it, bool warn_duplicates, bool add_to_settings = true);
+    void _addSettingsToCategory(SettingCategory* category, const rapidjson::Value& json_object, SettingConfig* parent);
 };
 
-}//namespace cura
 #endif//SETTING_REGISTRY_H

src/settings.cpp

@@ -7,58 +7,21 @@
 #include "settings.h"
 #include "settingRegistry.h"
 
-namespace cura
-{
 //c++11 no longer defines M_PI, so add our own constant.
 #ifndef M_PI
 #define M_PI 3.14159265358979323846
 #endif
 
-std::string toString(EGCodeFlavor flavor)
-{
-    switch (flavor)
-    {
-        case EGCodeFlavor::BFB:
-            return "BFB";
-        case EGCodeFlavor::MACH3:
-            return "Mach3";
-        case EGCodeFlavor::MAKERBOT:
-            return "Makerbot";
-        case EGCodeFlavor::ULTIGCODE:
-            return "UltiGCode";
-        case EGCodeFlavor::REPRAP_VOLUMATRIC:
-            return "RepRap(Volumetric)";
-        case EGCodeFlavor::REPRAP:
-        default:
-            return "RepRap";
-    }
-}
-
-SettingsBaseVirtual::SettingsBaseVirtual()
+SettingsBase::SettingsBase()
 : parent(NULL)
 {
 }
 
-SettingsBaseVirtual::SettingsBaseVirtual(SettingsBaseVirtual* parent)
+SettingsBase::SettingsBase(SettingsBase* parent)
 : parent(parent)
 {
 }
 
-SettingsBase::SettingsBase()
-: SettingsBaseVirtual(NULL)
-{
-}
-
-SettingsBase::SettingsBase(SettingsBaseVirtual* parent)
-: SettingsBaseVirtual(parent)
-{
-}
-
-SettingsMessenger::SettingsMessenger(SettingsBaseVirtual* parent)
-: SettingsBaseVirtual(parent)
-{
-}
-
 void SettingsBase::setSetting(std::string key, std::string value)
 {
     if (SettingRegistry::getInstance()->settingExists(key))
@@ -86,6 +49,7 @@ std::string SettingsBase::getSettingString(std::string key)
     if (SettingRegistry::getInstance()->settingExists(key))
     {
         setting_values[key] = SettingRegistry::getInstance()->getSettingConfig(key)->getDefaultValue();
+        cura::logError("Using default for: %s = %s\n", key.c_str(), setting_values[key].c_str());
     }
     else
     {
@@ -95,69 +59,45 @@ std::string SettingsBase::getSettingString(std::string key)
     return setting_values[key];
 }
 
-void SettingsMessenger::setSetting(std::string key, std::string value)
+bool SettingsBase::hasSetting(std::string key)
 {
-    parent->setSetting(key, value);
-}
-
-std::string SettingsMessenger::getSettingString(std::string key)
-{
-    return parent->getSettingString(key);
-}
-
-
-void SettingsBase::setExtruderTrainDefaults(unsigned int extruder_nr)
-{
-    const SettingContainer* machine_extruder_trains = SettingRegistry::getInstance()->getCategory(std::string("machine_extruder_trains"));
-    
-    if (!machine_extruder_trains) 
+    if (setting_values.find(key) != setting_values.end())
     {
-        // no machine_extruder_trains setting present; just use defaults for each train..
-        return;
+        return true;
+    }
+    if (parent)
+    {
+        return parent->hasSetting(key);
     }
     
-    const SettingConfig* train = machine_extruder_trains->getChild(extruder_nr);
-    
-    if (!train)
-    {
-        // not enough machine_extruder_trains settings present; just use defaults for this train..
-        return;
-    }
-    
-    for (const SettingConfig& setting : train->getChildren())
-    {
-        if (setting_values.find(setting.getKey()) == setting_values.end())
-        {
-            setSetting(setting.getKey(), setting.getDefaultValue());
-        }
-    }
+    return false;
 }
 
-int SettingsBaseVirtual::getSettingAsIndex(std::string key)
+int SettingsBase::getSettingAsIndex(std::string key)
 {
     std::string value = getSettingString(key);
     return atoi(value.c_str());
 }
 
-int SettingsBaseVirtual::getSettingAsCount(std::string key)
+int SettingsBase::getSettingAsCount(std::string key)
 {
     std::string value = getSettingString(key);
     return atoi(value.c_str());
 }
 
-int SettingsBaseVirtual::getSettingInMicrons(std::string key)
+int SettingsBase::getSettingInMicrons(std::string key)
 {
     std::string value = getSettingString(key);
     return atof(value.c_str()) * 1000.0;
 }
 
-double SettingsBaseVirtual::getSettingInAngleRadians(std::string key)
+double SettingsBase::getSettingInAngleRadians(std::string key)
 {
     std::string value = getSettingString(key);
     return atof(value.c_str()) / 180.0 * M_PI;
 }
 
-bool SettingsBaseVirtual::getSettingBoolean(std::string key)
+bool SettingsBase::getSettingBoolean(std::string key)
 {
     std::string value = getSettingString(key);
     if (value == "on")
@@ -166,192 +106,83 @@ bool SettingsBaseVirtual::getSettingBoolean(std::string key)
         return true;
     if (value == "true" or value == "True") //Python uses "True"
         return true;
-    int num = atoi(value.c_str());
-    return num != 0;
+    return atoi(value.c_str()) != 0;
 }
 
-double SettingsBaseVirtual::getSettingInDegreeCelsius(std::string key)
+double SettingsBase::getSettingInDegreeCelsius(std::string key)
 {
     std::string value = getSettingString(key);
     return atof(value.c_str());
 }
 
-double SettingsBaseVirtual::getSettingInMillimetersPerSecond(std::string key)
+double SettingsBase::getSettingInMillimetersPerSecond(std::string key)
 {
     std::string value = getSettingString(key);
     return std::max(1.0, atof(value.c_str()));
 }
 
-double SettingsBaseVirtual::getSettingInCubicMillimeters(std::string key)
+double SettingsBase::getSettingInPercentage(std::string key)
 {
     std::string value = getSettingString(key);
     return std::max(0.0, atof(value.c_str()));
 }
 
-double SettingsBaseVirtual::getSettingInPercentage(std::string key)
+double SettingsBase::getSettingInSeconds(std::string key)
 {
     std::string value = getSettingString(key);
     return std::max(0.0, atof(value.c_str()));
 }
 
-double SettingsBaseVirtual::getSettingInSeconds(std::string key)
-{
-    std::string value = getSettingString(key);
-    return std::max(0.0, atof(value.c_str()));
-}
-
-FlowTempGraph SettingsBaseVirtual::getSettingAsFlowTempGraph(std::string key)
-{
-    FlowTempGraph ret;
-    const char* c_str = getSettingString(key).c_str();
-    char const* char_p = c_str;
-    while (*char_p != '[')
-    {
-        if (*char_p == '\0') //We've reached the end of string without encountering the first opening bracket.
-        {
-            return ret; //Empty at this point.
-        }
-        char_p++;
-    }
-    char_p++; // skip the '['
-    for (; *char_p != '\0'; char_p++)
-    {
-        while (*char_p != '[')
-        {
-            if (*char_p == '\0') //We've reached the end of string without finding the next opening bracket.
-            {
-                return ret; //Don't continue parsing this item then. Just stop and return.
-            }
-            char_p++;
-        }
-        char_p++; // skip the '['
-        char* end;
-        double first = strtod(char_p, &end); //If not a valid number, this becomes zero.
-        char_p = end;
-        while (*char_p != ',')
-        {
-            if (*char_p == '\0') //We've reached the end of string without finding the comma.
-            {
-                return ret; //This entry is incomplete.
-            }
-            char_p++;
-        }
-        char_p++; // skip the ','
-        double second = strtod(char_p, &end); //If not a valid number, this becomes zero.
-        ret.data.emplace_back(first, second);
-        char_p = end;
-        while (*char_p != ']')
-        {
-            if (*char_p == '\0') //We've reached the end of string without finding the closing bracket.
-            {
-                return ret; //This entry is probably complete and has been added, but stop searching.
-            }
-            char_p++;
-        }
-        char_p++; // skip the ']'
-        if (*char_p == ']' || *char_p == '\0')
-        {
-            break;
-        }
-    }
-    return ret;
-}
-
-
-EGCodeFlavor SettingsBaseVirtual::getSettingAsGCodeFlavor(std::string key)
+EGCodeFlavor SettingsBase::getSettingAsGCodeFlavor(std::string key)
 {
     std::string value = getSettingString(key);
     if (value == "RepRap")
-        return EGCodeFlavor::REPRAP;
+        return GCODE_FLAVOR_REPRAP;
     else if (value == "UltiGCode")
-        return EGCodeFlavor::ULTIGCODE;
+        return GCODE_FLAVOR_ULTIGCODE;
     else if (value == "Makerbot")
-        return EGCodeFlavor::MAKERBOT;
+        return GCODE_FLAVOR_MAKERBOT;
     else if (value == "BFB")
-        return EGCodeFlavor::BFB;
+        return GCODE_FLAVOR_BFB;
     else if (value == "MACH3")
-        return EGCodeFlavor::MACH3;
+        return GCODE_FLAVOR_MACH3;
     else if (value == "RepRap (Volumatric)")
-        return EGCodeFlavor::REPRAP_VOLUMATRIC;
-    return EGCodeFlavor::REPRAP;
+        return GCODE_FLAVOR_REPRAP_VOLUMATRIC;
+    return GCODE_FLAVOR_REPRAP;
 }
 
-EFillMethod SettingsBaseVirtual::getSettingAsFillMethod(std::string key)
+EFillMethod SettingsBase::getSettingAsFillMethod(std::string key)
 {
     std::string value = getSettingString(key);
-    if (value == "lines")
-        return EFillMethod::LINES;
-    if (value == "grid")
-        return EFillMethod::GRID;
-    if (value == "triangles")
-        return EFillMethod::TRIANGLES;
-    if (value == "concentric")
-        return EFillMethod::CONCENTRIC;
-    if (value == "zigzag")
-        return EFillMethod::ZIG_ZAG;
-    return EFillMethod::NONE;
+    if (value == "Lines")
+        return Fill_Lines;
+    if (value == "Grid")
+        return Fill_Grid;
+    if (value == "Triangles")
+        return Fill_Triangles;
+    if (value == "Concentric")
+        return Fill_Concentric;
+    if (value == "ZigZag")
+        return Fill_ZigZag;
+    return Fill_None;
 }
 
-EPlatformAdhesion SettingsBaseVirtual::getSettingAsPlatformAdhesion(std::string key)
+EPlatformAdhesion SettingsBase::getSettingAsPlatformAdhesion(std::string key)
 {
     std::string value = getSettingString(key);
-    if (value == "brim")
-        return EPlatformAdhesion::BRIM;
-    if (value == "raft")
-        return EPlatformAdhesion::RAFT;
-    return EPlatformAdhesion::SKIRT;
+    if (value == "Brim")
+        return Adhesion_Brim;
+    if (value == "Raft")
+        return Adhesion_Raft;
+    return Adhesion_None;
 }
 
-ESupportType SettingsBaseVirtual::getSettingAsSupportType(std::string key)
+ESupportType SettingsBase::getSettingAsSupportType(std::string key)
 {
     std::string value = getSettingString(key);
-    if (value == "everywhere")
-        return ESupportType::EVERYWHERE;
-    if (value == "buildplate")
-        return ESupportType::PLATFORM_ONLY;
-    return ESupportType::NONE;
+    if (value == "Everywhere")
+        return Support_Everywhere;
+    if (value == "Touching Buildplate")
+        return Support_PlatformOnly;
+    return Support_None;
 }
-
-EZSeamType SettingsBaseVirtual::getSettingAsZSeamType(std::string key)
-{
-    std::string value = getSettingString(key);
-    if (value == "random")
-        return EZSeamType::RANDOM;
-    if (value == "shortest")
-        return EZSeamType::SHORTEST;
-    if (value == "back")
-        return EZSeamType::BACK;
-    return EZSeamType::SHORTEST;
-}
-
-ESurfaceMode SettingsBaseVirtual::getSettingAsSurfaceMode(std::string key)
-{
-    std::string value = getSettingString(key);
-    if (value == "normal")
-        return ESurfaceMode::NORMAL;
-    if (value == "surface")
-        return ESurfaceMode::SURFACE;
-    if (value == "both")
-        return ESurfaceMode::BOTH;
-    return ESurfaceMode::NORMAL;
-}
-
-FillPerimeterGapMode SettingsBaseVirtual::getSettingAsFillPerimeterGapMode(std::string key)
-{
-    std::string value = getSettingString(key);
-    if (value == "nowhere")
-    {
-        return FillPerimeterGapMode::NOWHERE;
-    }
-    if (value == "everywhere")
-    {
-        return FillPerimeterGapMode::EVERYWHERE;
-    }
-    if (value == "skin")
-    {
-        return FillPerimeterGapMode::SKIN;
-    }
-    return FillPerimeterGapMode::NOWHERE;
-}
-
-}//namespace cura

src/settings.h

@@ -3,16 +3,9 @@
 
 #include <vector>
 #include <map>
-#include <unordered_map>
-#include <sstream>
 
 #include "utils/floatpoint.h"
 
-#include "FlowTempGraph.h"
-
-namespace cura
-{
-
 #ifndef VERSION
 #define VERSION "DEV"
 #endif
@@ -21,7 +14,7 @@ namespace cura
  * Different flavors of GCode. Some machines require different types of GCode.
  * The GCode flavor definition handles this as a big setting to make major or minor modifications to the GCode.
  */
-enum class EGCodeFlavor
+enum EGCodeFlavor
 {
 /**
  * RepRap flavored GCode is Marlin/Sprinter/Repetier based GCode.
@@ -31,7 +24,7 @@ enum class EGCodeFlavor
  *  Retraction is done on E values with G1. Start/end code is added.
  *  M106 Sxxx and M107 are used to turn the fan on/off.
  **/
-    REPRAP = 0,
+    GCODE_FLAVOR_REPRAP = 0,
 /**
  * UltiGCode flavored is Marlin based GCode.
  *  UltiGCode uses less settings on the slicer and puts more settings in the firmware. This makes for more hardware/material independed GCode.
@@ -41,7 +34,7 @@ enum class EGCodeFlavor
  *  Start/end code is not added.
  *  M106 Sxxx and M107 are used to turn the fan on/off.
  **/
-    ULTIGCODE = 1,
+    GCODE_FLAVOR_ULTIGCODE = 1,
 /**
  * Makerbot flavored GCode.
  *  Looks a lot like RepRap GCode with a few changes. Requires MakerWare to convert to X3G files.
@@ -51,7 +44,7 @@ enum class EGCodeFlavor
  *   Fan OFF is M127 T0
  *   Homing is done with G162 X Y F2000
  **/
-    MAKERBOT = 2,
+    GCODE_FLAVOR_MAKERBOT = 2,
 
 /**
  * Bits From Bytes GCode.
@@ -59,13 +52,13 @@ enum class EGCodeFlavor
  *  Need X,Y,Z,F on every line.
  *  Needs extruder ON/OFF (M101, M103), has auto-retrection (M227 S[2560*mm] P[2560*mm])
  **/
-    BFB = 3,
+    GCODE_FLAVOR_BFB = 3,
 
 /**
  * MACH3 GCode
  *  MACH3 is CNC control software, which expects A/B/C/D for extruders, instead of E.
  **/
-    MACH3 = 4,
+    GCODE_FLAVOR_MACH3 = 4,
 /**
  * RepRap volumatric flavored GCode is Marlin based GCode.
  *  Volumatric uses less settings on the slicer and puts more settings in the firmware. This makes for more hardware/material independed GCode.
@@ -74,123 +67,48 @@ enum class EGCodeFlavor
  *  Retraction is done with G10 and G11. Retraction settings are ignored. G10 S1 is used for multi-extruder switch retraction.
  *  M106 Sxxx and M107 are used to turn the fan on/off.
  **/
-    REPRAP_VOLUMATRIC = 5,
+    GCODE_FLAVOR_REPRAP_VOLUMATRIC = 5,
 };
 
-/*!
- * Converts a gcode flavor type to string so that it can be included in the gcode.
- */
-std::string toString(EGCodeFlavor flavor);
-
 /*!
  * In Cura different infill methods are available.
  * This enum defines which fill patterns are available to get a uniform naming troughout the engine.
  * The different methods are used for top/bottom, support and sparse infill.
  */
-enum class EFillMethod
+enum EFillMethod
 {
-    LINES,
-    GRID,
-    TRIANGLES,
-    CONCENTRIC,
-    ZIG_ZAG,
-    NONE
+    Fill_Lines,
+    Fill_Grid,
+    Fill_Triangles,
+    Fill_Concentric,
+    Fill_ZigZag,
+    Fill_None
 };
 
 /*!
  * Type of platform adheasion
  */
-enum class EPlatformAdhesion
+enum EPlatformAdhesion
 {
-    SKIRT,
-    BRIM,
-    RAFT
+    Adhesion_None,
+    Adhesion_Brim,
+    Adhesion_Raft
 };
 
 /*!
  * Type of support material to generate
  */
-enum class ESupportType
+enum ESupportType
 {
-    NONE,
-    PLATFORM_ONLY,
-    EVERYWHERE
-};
-
-enum class EZSeamType
-{
-    RANDOM,
-    SHORTEST,
-    BACK
-};
-
-enum class ESurfaceMode
-{
-    NORMAL,
-    SURFACE,
-    BOTH
-};
-
-enum class FillPerimeterGapMode
-{
-    NOWHERE,
-    EVERYWHERE,
-    SKIN
+    Support_None,
+    Support_PlatformOnly,
+    Support_Everywhere
 };
 
 #define MAX_EXTRUDERS 16
 
-//Maximum number of infill layers that can be combined into a single infill extrusion area.
-#define MAX_INFILL_COMBINE 8
-    
-class SettingsBase;
-
-/*!
- * An abstract class for classes that can provide setting values.
- * These are: SettingsBase, which contains setting information 
- * and SettingsMessenger, which can pass on setting information from a SettingsBase
- */
-class SettingsBaseVirtual
-{
-protected:
-    SettingsBaseVirtual* parent;
-public:
-    virtual std::string getSettingString(std::string key) = 0;
-    
-    virtual void setSetting(std::string key, std::string value) = 0;
-    
-    virtual ~SettingsBaseVirtual() {}
-    
-    SettingsBaseVirtual(); //!< SettingsBaseVirtual without a parent settings object
-    SettingsBaseVirtual(SettingsBaseVirtual* parent); //!< construct a SettingsBaseVirtual with a parent settings object
-    
-    void setParent(SettingsBaseVirtual* parent) { this->parent = parent; }
-    SettingsBaseVirtual* getParent() { return parent; }
-    
-    int getSettingAsIndex(std::string key);
-    int getSettingAsCount(std::string key);
-    
-    double getSettingInAngleRadians(std::string key);
-    int getSettingInMicrons(std::string key);
-    bool getSettingBoolean(std::string key);
-    double getSettingInDegreeCelsius(std::string key);
-    double getSettingInMillimetersPerSecond(std::string key);
-    double getSettingInCubicMillimeters(std::string key);
-    double getSettingInPercentage(std::string key);
-    double getSettingInSeconds(std::string key);
-    
-    FlowTempGraph getSettingAsFlowTempGraph(std::string key);
-    
-    std::vector<std::pair<double, double>> getSettingAsPointVector(std::string key);
-    
-    EGCodeFlavor getSettingAsGCodeFlavor(std::string key);
-    EFillMethod getSettingAsFillMethod(std::string key);
-    EPlatformAdhesion getSettingAsPlatformAdhesion(std::string key);
-    ESupportType getSettingAsSupportType(std::string key);
-    EZSeamType getSettingAsZSeamType(std::string key);
-    ESurfaceMode getSettingAsSurfaceMode(std::string key);
-    FillPerimeterGapMode getSettingAsFillPerimeterGapMode(std::string key);
-};
+//Maximum number of sparse layers that can be combined into a single sparse extrusion.
+#define MAX_SPARSE_COMBINE 8
 
 /*!
  * Base class for every object that can hold settings.
@@ -199,61 +117,36 @@ public:
  * Different conversion functions are available for settings to increase code clarity and in the future make
  * unit conversions possible.
  */
-class SettingsBase : public SettingsBaseVirtual
+class SettingsBase
 {
 private:
-    std::unordered_map<std::string, std::string> setting_values;
+    std::map<std::string, std::string> setting_values;
+    SettingsBase* parent;
 public:
-    SettingsBase(); //!< SettingsBase without a parent settings object
-    SettingsBase(SettingsBaseVirtual* parent); //!< construct a SettingsBase with a parent settings object
-    
-    /*!
-     * Retrieve the defaults for each extruder train from the machine_extruder_trains settings 
-     * and set the general settings to those defaults if they haven't been set yet.
-     * 
-     * Only sets those settings which haven't already been set on that level - not looking at its parent (FffProcessor, meshgroup) or children (meshes).
-     * 
-     * \param extruder_nr The index of which extruder train in machine_extruder_trains to get the settings from
-     */
-    void setExtruderTrainDefaults(unsigned int extruder_nr);
-    
+    SettingsBase();
+    SettingsBase(SettingsBase* parent);
+
+    bool hasSetting(std::string key);
+
     void setSetting(std::string key, std::string value);
-    std::string getSettingString(std::string key); //!< Get a setting from this SettingsBase (or any ancestral SettingsBase)
     
-    std::string getAllLocalSettingsString()
-    {
-        std::stringstream sstream;
-        for (auto pair : setting_values)
-        {
-            if (!pair.second.empty())
-            {
-                sstream << " -s " << pair.first << "=\"" << pair.second << "\"";
-            }
-        }
-        return sstream.str();
-    }
+    std::string getSettingString(std::string key);
+    int getSettingAsIndex(std::string key);
+    int getSettingAsCount(std::string key);
     
-    void debugOutputAllLocalSettings() 
-    {
-        for (auto pair : setting_values)
-            std::cerr << pair.first << " : " << pair.second << std::endl;
-    }
-};
-
-/*!
- * Base class for an object which passes on settings from another object.
- * An object which is a subclass of SettingsMessenger can be handled as a SettingsBase;
- * the difference is that such an object cannot hold any settings, but can only pass on the settings from its parent.
- */
-class SettingsMessenger : public SettingsBaseVirtual
-{
-public:
-    SettingsMessenger(SettingsBaseVirtual* parent); //!< construct a SettingsMessenger with a parent settings object
+    double getSettingInAngleRadians(std::string key);
+    int getSettingInMicrons(std::string key);
+    bool getSettingBoolean(std::string key);
+    double getSettingInDegreeCelsius(std::string key);
+    double getSettingInMillimetersPerSecond(std::string key);
+    double getSettingInPercentage(std::string key);
+    double getSettingInSeconds(std::string key);
     
-    void setSetting(std::string key, std::string value); //!< Set a setting of the parent SettingsBase to a given value
-    std::string getSettingString(std::string key); //!< Get a setting from the parent SettingsBase (or any further ancestral SettingsBase)
+    EGCodeFlavor getSettingAsGCodeFlavor(std::string key);
+    EFillMethod getSettingAsFillMethod(std::string key);
+    EPlatformAdhesion getSettingAsPlatformAdhesion(std::string key);
+    ESupportType getSettingAsSupportType(std::string key);
 };
 
 
-}//namespace cura
 #endif//SETTINGS_H

src/skin.cpp

@@ -1,107 +1,69 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
 #include "skin.h"
+#include "polygonOptimizer.h"
 #include "utils/polygonUtils.h"
 
-#define MIN_AREA_SIZE (0.4 * 0.4) 
-
 namespace cura 
 {
 
-        
-void generateSkins(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount, int wall_line_count, int innermost_wall_extrusion_width, int insetCount, bool no_small_gaps_heuristic, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters)
+void generateSkins(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount, int insetCount, bool avoidOverlappingPerimeters)
 {
-    generateSkinAreas(layerNr, storage, innermost_wall_extrusion_width, downSkinCount, upSkinCount, wall_line_count, no_small_gaps_heuristic);
+    generateSkinAreas(layerNr, storage, extrusionWidth, downSkinCount, upSkinCount);
 
     SliceLayer* layer = &storage.layers[layerNr];
     for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
     {
         SliceLayerPart* part = &layer->parts[partNr];
-        generateSkinInsets(part, extrusionWidth, insetCount, avoidOverlappingPerimeters_0, avoidOverlappingPerimeters);
+        generateSkinInsets(part, extrusionWidth, insetCount, avoidOverlappingPerimeters);
     }
 }
 
-void generateSkinAreas(int layer_nr, SliceMeshStorage& storage, int innermost_wall_extrusion_width, int downSkinCount, int upSkinCount, int wall_line_count, bool no_small_gaps_heuristic)
+void generateSkinAreas(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount)
 {
-    SliceLayer& layer = storage.layers[layer_nr];
-    
-    if (downSkinCount == 0 && upSkinCount == 0)
+    SliceLayer* layer = &storage.layers[layerNr];
+
+    for(unsigned int partNr=0; partNr<layer->parts.size(); partNr++)
     {
-        return;
-    }
-    
-    for(unsigned int partNr = 0; partNr < layer.parts.size(); partNr++)
-    {
-        SliceLayerPart& part = layer.parts[partNr];
+        SliceLayerPart* part = &layer->parts[partNr];
+        
+        Polygons upskin = part->insets.back().offset(-extrusionWidth/2);
+        Polygons downskin = upskin;
 
-        if (int(part.insets.size()) < wall_line_count)
+        
+        if (static_cast<int>(layerNr - downSkinCount) >= 0)
         {
-            continue; // the last wall is not present, the part should only get inter preimeter gaps, but no skin.
-        }
-
-        Polygons upskin = part.insets.back().offset(-innermost_wall_extrusion_width/2);
-        Polygons downskin = (downSkinCount == 0)? Polygons() : upskin;
-        if (upSkinCount == 0) upskin = Polygons();
-
-        auto getInsidePolygons = [&part](SliceLayer& layer2)
+            SliceLayer* layer2 = &storage.layers[layerNr - downSkinCount];
+            for(SliceLayerPart& part2 : layer2->parts)
             {
-                Polygons result;
-                for(SliceLayerPart& part2 : layer2.parts)
-                {
-                    if (part.boundaryBox.hit(part2.boundaryBox))
-                        result.add(part2.insets.back());
-                }
-                return result;
-            };
-            
-        if (no_small_gaps_heuristic)
-        {
-            if (static_cast<int>(layer_nr - downSkinCount) >= 0)
-            {
-                downskin = downskin.difference(getInsidePolygons(storage.layers[layer_nr - downSkinCount])); // skin overlaps with the walls
-            }
-            
-            if (static_cast<int>(layer_nr + upSkinCount) < static_cast<int>(storage.layers.size()))
-            {
-                upskin = upskin.difference(getInsidePolygons(storage.layers[layer_nr + upSkinCount])); // skin overlaps with the walls
+                if (part->boundaryBox.hit(part2.boundaryBox))
+                    downskin = downskin.difference(part2.insets.back());
             }
         }
-        else 
+        if (static_cast<int>(layerNr + upSkinCount) < static_cast<int>(storage.layers.size()))
         {
-            if (layer_nr > 0 && downSkinCount > 0)
+            SliceLayer* layer2 = &storage.layers[layerNr + upSkinCount];
+            for(SliceLayerPart& part2 : layer2->parts)
             {
-                Polygons not_air = getInsidePolygons(storage.layers[layer_nr - 1]);
-                for (int downskin_layer_nr = std::max(0, layer_nr - downSkinCount); downskin_layer_nr < layer_nr - 1; downskin_layer_nr++)
-                {
-                    not_air = not_air.intersection(getInsidePolygons(storage.layers[downskin_layer_nr]));
-                }
-                downskin = downskin.difference(not_air); // skin overlaps with the walls
-            }
-            
-            if (layer_nr < static_cast<int>(storage.layers.size()) - 1 && upSkinCount > 0)
-            {
-                Polygons not_air = getInsidePolygons(storage.layers[layer_nr + 1]);
-                for (int upskin_layer_nr = layer_nr + 2; upskin_layer_nr < std::min(static_cast<int>(storage.layers.size()) - 1, layer_nr + upSkinCount); upskin_layer_nr++)
-                {
-                    not_air = not_air.intersection(getInsidePolygons(storage.layers[upskin_layer_nr]));
-                }
-                upskin = upskin.difference(not_air); // skin overlaps with the walls
+                if (part->boundaryBox.hit(part2.boundaryBox))
+                    upskin = upskin.difference(part2.insets.back());
             }
         }
         
         Polygons skin = upskin.unionPolygons(downskin);
+          
+        double minAreaSize = (2 * M_PI * INT2MM(extrusionWidth) * INT2MM(extrusionWidth)) * 0.3; // TODO: hardcoded value!
+        skin.removeSmallAreas(minAreaSize);
         
-        skin.removeSmallAreas(MIN_AREA_SIZE);
-        
-        for (PolygonsPart& skin_area_part : skin.splitIntoParts())
+        for (Polygons& skin_area_part : skin.splitIntoParts())
         {
-            part.skin_parts.emplace_back();
-            part.skin_parts.back().outline = skin_area_part;
+            part->skin_parts.emplace_back();
+            part->skin_parts.back().outline = skin_area_part;
         }
     }
 }
 
 
-void generateSkinInsets(SliceLayerPart* part, int extrusionWidth, int insetCount, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters)
+void generateSkinInsets(SliceLayerPart* part, int extrusionWidth, int insetCount, bool avoidOverlappingPerimeters)
 {
     if (insetCount == 0)
     {
@@ -115,16 +77,15 @@ void generateSkinInsets(SliceLayerPart* part, int extrusionWidth, int insetCount
             skin_part.insets.push_back(Polygons());
             if (i == 0)
             {
-                PolygonUtils::offsetSafe(skin_part.outline, - extrusionWidth/2, extrusionWidth, skin_part.insets[0], avoidOverlappingPerimeters_0);
+                offsetSafe(skin_part.outline, - extrusionWidth/2, extrusionWidth, skin_part.insets[0], avoidOverlappingPerimeters);
                 Polygons in_between = skin_part.outline.difference(skin_part.insets[0].offset(extrusionWidth/2)); 
                 skin_part.perimeterGaps.add(in_between);
             } else
             {
-                PolygonUtils::offsetExtrusionWidth(skin_part.insets[i-1], true, extrusionWidth, skin_part.insets[i], &skin_part.perimeterGaps, avoidOverlappingPerimeters);
+                offsetExtrusionWidth(skin_part.insets[i-1], true, extrusionWidth, skin_part.insets[i], &skin_part.perimeterGaps, avoidOverlappingPerimeters);
             }
-            
-            // optimize polygons: remove unnnecesary verts
-            skin_part.insets[i].simplify();
+                
+            optimizePolygons(skin_part.insets[i]);
             if (skin_part.insets[i].size() < 1)
             {
                 skin_part.insets.pop_back();
@@ -134,17 +95,13 @@ void generateSkinInsets(SliceLayerPart* part, int extrusionWidth, int insetCount
     }
 }
 
-void generateInfill(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int infill_skin_overlap, int wall_line_count)
+void generateSparse(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int infill_skin_overlap)
 {
     SliceLayer& layer = storage.layers[layerNr];
 
     for(SliceLayerPart& part : layer.parts)
     {
-        if (int(part.insets.size()) < wall_line_count)
-        {
-            continue; // the last wall is not present, the part should only get inter preimeter gaps, but no infill.
-        }
-        Polygons infill = part.insets.back().offset(-extrusionWidth / 2 - infill_skin_overlap);
+        Polygons sparse = part.insets.back().offset(-extrusionWidth / 2 - infill_skin_overlap);
 
         for(SliceLayerPart& part2 : layer.parts)
         {
@@ -152,62 +109,41 @@ void generateInfill(int layerNr, SliceMeshStorage& storage, int extrusionWidth,
             {
                 for(SkinPart& skin_part : part2.skin_parts)
                 {
-                    infill = infill.difference(skin_part.outline);
+                    sparse = sparse.difference(skin_part.outline);
                 }
             }
         }
-        infill.removeSmallAreas(MIN_AREA_SIZE);
+        sparse.removeSmallAreas(3.0);//(2 * M_PI * INT2MM(config.extrusionWidth) * INT2MM(config.extrusionWidth)) * 3;
         
-        part.infill_area.push_back(infill.offset(infill_skin_overlap));
+        part.sparse_outline.push_back(sparse.offset(infill_skin_overlap));
     }
 }
 
-void combineInfillLayers(SliceMeshStorage& storage,unsigned int amount)
+void combineSparseLayers(int layerNr, SliceMeshStorage& storage, int amount)
 {
-    if(amount <= 1) //If we must combine 1 layer, nothing needs to be combined. Combining 0 layers is invalid.
-    {
-        return;
-    }
-    if(storage.layers.empty() || storage.layers.size() - 1 < static_cast<size_t>(storage.getSettingAsCount("top_layers")) || storage.getSettingAsCount("infill_line_distance") <= 0) //No infill is even generated.
-    {
-        return;
-    }
-    /* We need to round down the layer index we start at to the nearest
-    divisible index. Otherwise we get some parts that have infill at divisible
-    layers and some at non-divisible layers. Those layers would then miss each
-    other. */
-    size_t min_layer = storage.getSettingAsCount("bottom_layers") + amount - 1;
-    min_layer -= min_layer % amount; //Round upwards to the nearest layer divisible by infill_sparse_combine.
-    size_t max_layer = storage.layers.size() - 1 - storage.getSettingAsCount("top_layers");
-    max_layer -= max_layer % amount; //Round downwards to the nearest layer divisible by infill_sparse_combine.
-    for(size_t layer_idx = min_layer;layer_idx <= max_layer;layer_idx += amount) //Skip every few layers, but extrude more.
-    {
-        SliceLayer* layer = &storage.layers[layer_idx];
+    SliceLayer* layer = &storage.layers[layerNr];
 
-        for(unsigned int n = 1;n < amount;n++)
+    for(int n=1; n<amount; n++)
+    {
+        if (layerNr < n)
+            break;
+        
+        SliceLayer* layer2 = &storage.layers[layerNr - n];
+        for(SliceLayerPart& part : layer->parts)
         {
-            if(layer_idx < n)
+            Polygons result;
+            for(SliceLayerPart& part2 : layer2->parts)
             {
-                break;
-            }
-
-            SliceLayer* layer2 = &storage.layers[layer_idx - n];
-            for(SliceLayerPart& part : layer->parts)
-            {
-                Polygons result;
-                for(SliceLayerPart& part2 : layer2->parts)
+                if (part.boundaryBox.hit(part2.boundaryBox))
                 {
-                    if(part.boundaryBox.hit(part2.boundaryBox))
-                    {
-                        Polygons intersection = part.infill_area[n - 1].intersection(part2.infill_area[0]).offset(-200).offset(200);
-                        result.add(intersection);
-                        part.infill_area[n - 1] = part.infill_area[n - 1].difference(intersection);
-                        part2.infill_area[0] = part2.infill_area[0].difference(intersection);
-                    }
+                    Polygons intersection = part.sparse_outline[n - 1].intersection(part2.sparse_outline[0]).offset(-200).offset(200);
+                    result.add(intersection);
+                    part.sparse_outline[n - 1] = part.sparse_outline[n - 1].difference(intersection);
+                    part2.sparse_outline[0] = part2.sparse_outline[0].difference(intersection);
                 }
-
-                part.infill_area.push_back(result);
             }
+            
+            part.sparse_outline.push_back(result);
         }
     }
 }
@@ -240,7 +176,8 @@ void generatePerimeterGaps(int layer_nr, SliceMeshStorage& storage, int extrusio
             }
             part.perimeterGaps = part.perimeterGaps.intersection(outlines_above.xorPolygons(outlines_below));
         }
-        part.perimeterGaps.removeSmallAreas(MIN_AREA_SIZE);
+        double minAreaSize = (2 * M_PI * INT2MM(extrusionWidth) * INT2MM(extrusionWidth)) * 0.3; // TODO: hardcoded value!
+        part.perimeterGaps.removeSmallAreas(minAreaSize);
     }
 }
 

src/skin.h

@@ -26,14 +26,10 @@ void generatePerimeterGaps(int layerNr, SliceMeshStorage& storage, int extrusion
  * \param extrusionWidth extrusionWidth
  * \param downSkinCount The number of layers of bottom skin
  * \param upSkinCount The number of layers of top skin
- * \param wall_line_count The number of walls, i.e. the number of the wall from which to offset.
- * \param innermost_wall_extrusion_width The line width of the inner most wall
  * \param insetCount The number of perimeters to surround the skin
- * \param no_small_gaps_heuristic A heuristic which assumes there will be no small gaps between bottom and top skin with a z size smaller than the skin size itself
- * \param avoidOverlappingPerimeters_0 Whether to remove the parts of the first perimeters where it have overlap with itself (and store the gaps thus created in the \p storage)
  * \param avoidOverlappingPerimeters Whether to remove the parts of two consecutive perimeters where they have overlap (and store the gaps thus created in the \p storage)
  */
-void generateSkins(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount, int wall_line_count, int innermost_wall_extrusion_width, int insetCount, bool no_small_gaps_heuristic, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters);
+void generateSkins(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount, int insetCount, bool avoidOverlappingPerimeters);
 
 /*!
  * Generate the skin areas (outlines)
@@ -43,10 +39,8 @@ void generateSkins(int layerNr, SliceMeshStorage& storage, int extrusionWidth, i
  * \param extrusionWidth extrusionWidth
  * \param downSkinCount The number of layers of bottom skin
  * \param upSkinCount The number of layers of top skin
- * \param wall_line_count The number of walls, i.e. the number of the wall from which to offset.
- * \param no_small_gaps_heuristic A heuristic which assumes there will be no small gaps between bottom and top skin with a z size smaller than the skin size itself
  */
-void generateSkinAreas(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount, int wall_line_count, bool no_small_gaps_heuristic);
+void generateSkinAreas(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int downSkinCount, int upSkinCount);
 
 /*!
  * Generate the skin insets.
@@ -55,35 +49,19 @@ void generateSkinAreas(int layerNr, SliceMeshStorage& storage, int extrusionWidt
  * \param part The part where the skin outline information (input) is stored and where the skin insets (output) are stored.
  * \param extrusionWidth extrusionWidth
  * \param insetCount The number of perimeters to surround the skin
- * \param avoidOverlappingPerimeters_0 Whether to remove the parts of the first perimeters where it have overlap with itself (and store the gaps thus created in the \p storage)
  * \param avoidOverlappingPerimeters Whether to remove the parts of two consecutive perimeters where they have overlap (and store the gaps thus created in the \p storage)
  */
-void generateSkinInsets(SliceLayerPart* part, int extrusionWidth, int insetCount, bool avoidOverlappingPerimeters_0, bool avoidOverlappingPerimeters);
+void generateSkinInsets(SliceLayerPart* part, int extrusionWidth, int insetCount, bool avoidOverlappingPerimeters);
 
 /*!
- * Generate Infill by offsetting from the last wall.
- * 
- * The walls should already be generated.
- * 
+ * Generate Infill
  * \param layerNr The index of the layer for which to generate the infill
  * \param part The part where the insets (input) are stored and where the infill (output) is stored.
  * \param extrusionWidth width of the wall lines
  * \param infill_skin_overlap overlap distance between infill and skin
- * \param wall_line_count The number of walls, i.e. the number of the wall from which to offset.
  */
-void generateInfill(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int infill_skin_overlap, int wall_line_count);
-
-/*!
- * \brief Combines the infill of multiple layers for a specified mesh.
- * 
- * The infill layers are combined while the thickness of each layer is
- * multiplied such that the infill should fill up again to the full height of
- * all combined layers.
- * 
- * \param storage The mesh to combine the infill layers of.
- * \param amount The number of layers to combine.
- */
-void combineInfillLayers(SliceMeshStorage& storage,unsigned int amount);
+void generateSparse(int layerNr, SliceMeshStorage& storage, int extrusionWidth, int infill_skin_overlap);
+void combineSparseLayers(int layerNr, SliceMeshStorage& storage, int amount);
 
 }//namespace cura
 

src/skirt.cpp

@@ -2,87 +2,94 @@
 #include "skirt.h"
 #include "support.h"
 
-#include <queue> 
-
 namespace cura 
 {
 
-void generateSkirt(SliceDataStorage& storage, int distance, int count, int minLength)
+void generateSkirt(SliceDataStorage& storage, int distance, int extrusionWidth, int count, int minLength)
 {
     if (count == 0) return;
     
-    bool externalOnly = (distance > 0); // whether to include holes or not
+    bool externalOnly = (distance > 0);
     
-    int primary_extruder = 0; // TODO allow for other extruder to be primary
-    int primary_extrusion_width = storage.meshgroup->getExtruderTrain(primary_extruder)->getSettingInMicrons("skirt_line_width");
+    Polygons support;
+    if (storage.support.generated) 
+        support = storage.support.supportAreasPerLayer[0];
+    { // get support polygons
+        for(SliceMeshStorage& mesh : storage.meshes)
+        {
+            if (mesh.layers.size() < 1) continue;
+            SliceLayer* layer = &mesh.layers[0];
+            for(unsigned int i=0; i<layer->parts.size(); i++)        
+                support = support.difference(layer->parts[i].outline);
+        }
+        
+        // expand and contract to smooth the final polygon
+        if (count == 1 && distance > 0)
+        {
+            int dist = extrusionWidth * 5;
+            support = support.offset(dist).offset(-dist);
+        }
+    }
     
-    Polygons& skirt_primary_extruder = storage.skirt[primary_extruder];
+    int overshoot = 0; // distance by which to expand and contract the skirt to approximate the convex hull of the first layer
+    if (count == 1 && distance > 0)
+    {
+        overshoot = 100000; // 10 cm 
+    } 
     
-    bool get_convex_hull = count == 1 && distance > 0;
     
-    Polygons first_layer_outline = storage.getLayerOutlines(0, true, externalOnly);
-    
-    std::vector<Polygons> skirts;
     for(int skirtNr=0; skirtNr<count;skirtNr++)
     {
-        int offsetDistance = distance + primary_extrusion_width * skirtNr + primary_extrusion_width / 2;
+        int offsetDistance = distance + extrusionWidth * skirtNr + extrusionWidth / 2 + overshoot;
 
-        skirts.emplace_back(first_layer_outline.offset(offsetDistance, ClipperLib::jtRound));
-        Polygons& skirt_polygons = skirts.back();
-        
-        //Remove small inner skirt holes. Holes have a negative area, remove anything smaller then 100x extrusion "area"
-        for(unsigned int n=0; n<skirt_polygons.size(); n++)
+        Polygons skirtPolygons(storage.wipeTower.offset(offsetDistance));
+        for(SliceMeshStorage& mesh : storage.meshes)
         {
-            double area = skirt_polygons[n].area();
-            if (area < 0 && area > -primary_extrusion_width * primary_extrusion_width * 100)
-                skirt_polygons.remove(n--);
+            if (mesh.layers.size() < 1) continue;
+            SliceLayer* layer = &mesh.layers[0];
+            for(unsigned int i=0; i<layer->parts.size(); i++)
+            {
+                if (externalOnly)
+                {
+                    Polygons p;
+                    p.add(layer->parts[i].outline[0]);
+                    skirtPolygons = skirtPolygons.unionPolygons(p.offset(offsetDistance, ClipperLib::jtRound));
+                }
+                else
+                {
+                    skirtPolygons = skirtPolygons.unionPolygons(layer->parts[i].outline.offset(offsetDistance, ClipperLib::jtRound));
+                }
+            }
         }
-    
-        if (get_convex_hull)
+
+        skirtPolygons = skirtPolygons.unionPolygons(support.offset(offsetDistance, ClipperLib::jtRound));
+        //Remove small inner skirt holes. Holes have a negative area, remove anything smaller then 100x extrusion "area"
+        for(unsigned int n=0; n<skirtPolygons.size(); n++)
         {
-            skirt_polygons = skirt_polygons.convexHull(); 
-        } 
+            double area = skirtPolygons[n].area();
+            if (area < 0 && area > -extrusionWidth * extrusionWidth * 100)
+                skirtPolygons.remove(n--);
+        }
 
-        skirt_primary_extruder.add(skirt_polygons);
+        storage.skirt.add(skirtPolygons);
 
-        int length = skirt_primary_extruder.polygonLength();
-        if (skirtNr + 1 >= count && length > 0 && length < minLength) // make brim have more lines when total length is too small
+        int lenght = storage.skirt.polygonLength();
+        if (skirtNr + 1 >= count && lenght > 0 && lenght < minLength) // make brim have more lines when total length is too small
             count++;
     }
 
 
-    if (false) // the code below is for the old prime tower
-    { //Add a skirt UNDER the prime tower to make it stick better.
-        Polygons prime_tower = storage.primeTower.ground_poly.offset(-primary_extrusion_width / 2);
-        std::queue<Polygons> prime_tower_insets;
-        while(prime_tower.size() > 0)
-        {
-            prime_tower_insets.emplace(prime_tower);
-            prime_tower = prime_tower.offset(-primary_extrusion_width);
-        }
-        while (!prime_tower_insets.empty())
-        {
-            Polygons& inset = prime_tower_insets.back();
-            skirt_primary_extruder.add(inset);
-            prime_tower_insets.pop();
-        }
+    //Add a skirt under the wipetower to make it stick better.
+    Polygons wipe_tower = storage.wipeTower.offset(-extrusionWidth / 2);
+    while(wipe_tower.size() > 0)
+    {
+        storage.skirt.add(wipe_tower);
+        wipe_tower = wipe_tower.offset(-extrusionWidth);
     }
-    
-    { // process other extruders' brim/skirt (as one brim line around the old brim)
-        int offset_distance = 0;
-        int last_width = primary_extrusion_width;
-        for (int extruder = 0; extruder < storage.meshgroup->getExtruderCount(); extruder++)
-        {
-            if (extruder == primary_extruder) { continue; }
-            int width = storage.meshgroup->getExtruderTrain(extruder)->getSettingInMicrons("skirt_line_width");
-            offset_distance += last_width / 2 + width/2;
-            last_width = width;
-            while (storage.skirt[extruder].polygonLength() < minLength)
-            {
-                storage.skirt[extruder].add(skirts.back().offset(offset_distance, ClipperLib::jtRound));
-                offset_distance += width;
-            }
-        }
+
+    if (overshoot > 0)
+    {
+        storage.skirt = storage.skirt.offset(-overshoot, ClipperLib::jtRound);
     }
 }
 

src/skirt.h

@@ -12,10 +12,11 @@ namespace cura
  * 
  * \param storage Storage containing the parts at the first layer
  * \param distance The distance of the first outset from the parts at the first layer
+ * \param extrusionWidth extrusionWidth
  * \param count Number of outsets / brim lines
  * \param minLength The minimum length the skirt should have (enforced by taking more outsets)
  */
-void generateSkirt(SliceDataStorage& storage, int distance, int count, int minLength);
+void generateSkirt(SliceDataStorage& storage, int distance, int extrusionWidth, int count, int minLength);
 
 }//namespace cura
 

src/sliceDataStorage.cpp

@@ -1,278 +0,0 @@
-#include "sliceDataStorage.h"
-
-#include "FffProcessor.h" //To create a mesh group with if none is provided.
-
-namespace cura
-{
-
-Polygons SliceLayer::getOutlines(bool external_polys_only)
-{
-    Polygons ret;
-    getOutlines(ret, external_polys_only);
-    return ret;
-}
-
-void SliceLayer::getOutlines(Polygons& result, bool external_polys_only)
-{
-    for (SliceLayerPart& part : parts)
-    {
-        if (external_polys_only)
-        {
-            result.add(part.outline.outerPolygon());
-        }
-        else 
-        {
-            result.add(part.outline);
-        }
-    }
-}
-
-Polygons SliceLayer::getSecondOrInnermostWalls()
-{
-    Polygons ret;
-    getSecondOrInnermostWalls(ret);
-    return ret;
-}
-
-void SliceLayer::getSecondOrInnermostWalls(Polygons& layer_walls)
-{
-    for (SliceLayerPart& part : parts)
-    {
-        // we want the 2nd inner walls
-        if (part.insets.size() >= 2) {
-            layer_walls.add(part.insets[1]);
-            continue;
-        }
-        // but we'll also take the inner wall if the 2nd doesn't exist
-        if (part.insets.size() == 1) {
-            layer_walls.add(part.insets[0]);
-            continue;
-        }
-        // offset_from_outlines was so large that it completely destroyed our isle,
-        // so we'll just use the regular outline
-        layer_walls.add(part.outline);
-        continue;
-    }
-}
-
-
-SliceDataStorage::SliceDataStorage(MeshGroup* meshgroup) : SettingsMessenger(meshgroup),
-    meshgroup(meshgroup != nullptr ? meshgroup : new MeshGroup(FffProcessor::getInstance())), //If no mesh group is provided, we roll our own.
-    retraction_config_per_extruder(initializeRetractionConfigs()),
-    travel_config(&retraction_config, "MOVE"),
-    skirt_config(initializeSkirtConfigs()),
-    raft_base_config(&retraction_config_per_extruder[this->meshgroup->getSettingAsIndex("adhesion_extruder_nr")], "SUPPORT"),
-    raft_interface_config(&retraction_config_per_extruder[this->meshgroup->getSettingAsIndex("adhesion_extruder_nr")], "SUPPORT"),
-    raft_surface_config(&retraction_config_per_extruder[this->meshgroup->getSettingAsIndex("adhesion_extruder_nr")], "SUPPORT"),
-    support_config(&retraction_config_per_extruder[this->meshgroup->getSettingAsIndex("support_infill_extruder_nr")], "SUPPORT"),
-    support_roof_config(&retraction_config_per_extruder[this->meshgroup->getSettingAsIndex("support_roof_extruder_nr")], "SKIN"),
-    max_object_height_second_to_last_extruder(-1)
-{
-}
-
-Polygons SliceDataStorage::getLayerOutlines(int layer_nr, bool include_helper_parts, bool external_polys_only)
-{
-    if (layer_nr < 0)
-    { // when processing raft
-        if (include_helper_parts)
-        {
-            if (external_polys_only)
-            {
-                std::vector<PolygonsPart> parts = raftOutline.splitIntoParts();
-                Polygons result;
-                for (PolygonsPart& part : parts) 
-                {
-                    result.add(part.outerPolygon());
-                }
-                return result;
-            }
-            else 
-            {
-                return raftOutline;
-            }
-        }
-        else 
-        {
-            return Polygons();
-        }
-    }
-    else 
-    {
-        Polygons total;
-        for (SliceMeshStorage& mesh : meshes)
-        {
-            SliceLayer& layer = mesh.layers[layer_nr];
-            layer.getOutlines(total, external_polys_only);
-            if (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") != ESurfaceMode::NORMAL)
-            {
-                total = total.unionPolygons(layer.openPolyLines.offsetPolyLine(100));
-            }
-        }
-        if (include_helper_parts)
-        {
-            if (support.generated) 
-            {
-                total.add(support.supportLayers[layer_nr].supportAreas);
-                total.add(support.supportLayers[layer_nr].roofs);
-            }
-            total.add(primeTower.ground_poly);
-        }
-        return total;
-    }
-}
-
-Polygons SliceDataStorage::getLayerSecondOrInnermostWalls(int layer_nr, bool include_helper_parts)
-{
-    if (layer_nr < 0)
-    { // when processing raft
-        if (include_helper_parts)
-        {
-            return raftOutline;
-        }
-        else 
-        {
-            return Polygons();
-        }
-    }
-    else 
-    {
-        Polygons total;
-        for (SliceMeshStorage& mesh : meshes)
-        {
-            SliceLayer& layer = mesh.layers[layer_nr];
-            layer.getSecondOrInnermostWalls(total);
-            if (mesh.getSettingAsSurfaceMode("magic_mesh_surface_mode") != ESurfaceMode::NORMAL)
-            {
-                total = total.unionPolygons(layer.openPolyLines.offsetPolyLine(100));
-            }
-        }
-        if (include_helper_parts)
-        {
-            if (support.generated) 
-            {
-                total.add(support.supportLayers[layer_nr].supportAreas);
-                total.add(support.supportLayers[layer_nr].roofs);
-            }
-            total.add(primeTower.ground_poly);
-        }
-        return total;
-    }
-
-}
-
-
-std::vector<bool> SliceDataStorage::getExtrudersUsed(int layer_nr)
-{
-    std::vector<bool> ret;
-    ret.resize(meshgroup->getExtruderCount(), false);
-    if (layer_nr < 0)
-    {
-        ret[getSettingAsIndex("adhesion_extruder_nr")] = true; // raft
-    }
-    else 
-    {
-        if (layer_nr == 0)
-        { // process brim/skirt
-            for (int extr_nr = 0; extr_nr < meshgroup->getExtruderCount(); extr_nr++)
-            {
-                if (skirt[extr_nr].size() > 0)
-                {
-                    ret[extr_nr] = true;
-                    continue;
-                }
-            }
-        }
-
-        // TODO: ooze shield, draft shield
-
-        // support
-        if (support.supportLayers[layer_nr].supportAreas.size() > 0)
-        {
-            if (layer_nr == 0)
-            {
-                ret[getSettingAsIndex("support_extruder_nr_layer_0")] = true;
-            }
-            else 
-            {
-                ret[getSettingAsIndex("support_extruder_nr")] = true;
-            }
-        }
-        if (support.supportLayers[layer_nr].roofs.size() > 0)
-        {
-            ret[getSettingAsIndex("support_roof_extruder_nr")] = true;
-        }
-
-        for (SliceMeshStorage& mesh : meshes)
-        {
-            SliceLayer& layer = mesh.layers[layer_nr];
-            int extr_nr = mesh.getSettingAsIndex("extruder_nr");
-            if (layer.parts.size() > 0)
-            {
-                ret[extr_nr] = true;
-            }
-        }
-    }
-    return ret;
-}
-
-std::vector< bool > SliceDataStorage::getExtrudersUsed()
-{
-
-    std::vector<bool> ret;
-    ret.resize(meshgroup->getExtruderCount(), false);
-
-    ret[getSettingAsIndex("adhesion_extruder_nr")] = true; 
-    { // process brim/skirt
-        for (int extr_nr = 0; extr_nr < meshgroup->getExtruderCount(); extr_nr++)
-        {
-            if (skirt[extr_nr].size() > 0)
-            {
-                ret[extr_nr] = true;
-                continue;
-            }
-        }
-    }
-
-    // TODO: ooze shield, draft shield ..?
-
-    // support
-    // support is presupposed to be present...
-    ret[getSettingAsIndex("support_extruder_nr_layer_0")] = true;
-    ret[getSettingAsIndex("support_extruder_nr")] = true;
-    ret[getSettingAsIndex("support_roof_extruder_nr")] = true;
-
-    // all meshes are presupposed to actually have content
-    for (SliceMeshStorage& mesh : meshes)
-    {
-        ret[mesh.getSettingAsIndex("extruder_nr")] = true;
-    }
-    return ret;
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-} // namespace cura

src/sliceDataStorage.h

@@ -4,53 +4,37 @@
 
 #include "utils/intpoint.h"
 #include "utils/polygon.h"
-#include "utils/NoCopy.h"
 #include "mesh.h"
 #include "gcodePlanner.h"
-#include "MeshGroup.h"
-#include "PrimeTower.h"
 
 namespace cura 
 {
 /*!
  * A SkinPart is a connected area designated as top and/or bottom skin. 
  * Surrounding each non-bridged skin area with an outline may result in better top skins.
- * It's filled during FffProcessor.processSliceData(.) and used in FffProcessor.writeGCode(.) to generate the final gcode.
+ * It's filled during fffProcessor.processSliceData(.) and used in fffProcessor.writeGCode(.) to generate the final gcode.
  */    
 class SkinPart
 {
 public:
-    PolygonsPart outline;               //!< The skinOutline is the area which needs to be 100% filled to generate a proper top&bottom filling. It's filled by the "skin" module.
+    Polygons outline;               //!< The skinOutline is the area which needs to be 100% filled to generate a proper top&bottom filling. It's filled by the "skin" module.
     std::vector<Polygons> insets;   //!< The skin can have perimeters so that the skin lines always start at a perimeter instead of in the middle of an infill cell.
     Polygons perimeterGaps;         //!< The gaps introduced by avoidOverlappingPerimeters which would otherwise be overlapping perimeters.
 };
-
-/*!
- * A ReinforcementWall is like an insulated wall behind the outer walls.
- * It consists of an area with (generally more dense) infill and perimeters on the inside.
- * On the outside it has the outer walls, or the inner walls of another ReinforcementWall.
- */
-class ReinforcementWall
-{
-public:
-    Polygons wall_reinforcement_area; //!< The infill of the reinforced wall
-    std::vector<Polygons> wall_reinforcement_axtra_walls; //!< The extra walls on the inside of the reinforcement infill
-};
-
 /*!
     The SliceLayerPart is a single enclosed printable area for a single layer. (Also known as islands)
-    It's filled during the FffProcessor.processSliceData(.), where each step uses data from the previous steps.
-    Finally it's used in the FffProcessor.writeGCode(.) to generate the final gcode.
+    It's filled during the fffProcessor.processSliceData(.), where each step uses data from the previous steps.
+    Finally it's used in the fffProcessor.writeGCode(.) to generate the final gcode.
  */
 class SliceLayerPart
 {
 public:
     AABB boundaryBox;       //!< The boundaryBox is an axis-aligned bounardy box which is used to quickly check for possible collision between different parts on different layers. It's an optimalization used during skin calculations.
-    PolygonsPart outline;       //!< The outline is the first member that is filled, and it's filled with polygons that match a cross section of the 3D model. The first polygon is the outer boundary polygon and the rest are holes.
+    Polygons outline;       //!< The outline is the first member that is filled, and it's filled with polygons that match a cross section of the 3D model. The first polygon is the outer boundary polygon and the rest are holes.
+    Polygons combBoundery;  //!< The combBoundery is generated from the online. It's the area in which the nozzle tries to stay during traveling.
     std::vector<Polygons> insets;         //!< The insets are generated with: an offset of (index * line_width + line_width/2) compared to the outline. The insets are also known as perimeters, and printed inside out.
     std::vector<SkinPart> skin_parts;     //!< The skin parts which are filled for 100% with lines and/or insets.
-    std::vector<Polygons> infill_area; //!< The infill_area are the areas which need to be filled with sparse (0-99%) infill. The infill_area is an array to support thicker layers of sparse infill. infill_area[n] is infill_area of (n+1) layers thick. 
-    std::vector<ReinforcementWall> reinforcement_walls; //!< The reinforcement walls for this part. Order: from outter to inner reinforcement wall.
+    std::vector<Polygons> sparse_outline; //!< The sparse_outline are the areas which need to be filled with sparse (0-99%) infill. The sparse_outline is an array to support thicker layers of sparse infill. sparse_outline[n] is sparse outline of (n+1) layers thick. 
     Polygons perimeterGaps; //!< The gaps introduced by avoidOverlappingPerimeters which would otherwise be overlapping perimeters.
 };
 
@@ -64,184 +48,63 @@ public:
     // TODO: remove this /\ unused member!
     int printZ;     //!< The height at which this layer needs to be printed. Can differ from sliceZ due to the raft.
     std::vector<SliceLayerPart> parts;  //!< An array of LayerParts which contain the actual data. The parts are printed one at a time to minimize travel outside of the 3D model.
-    Polygons openPolyLines; //!< A list of lines which were never hooked up into a 2D polygon. (Currently unused in normal operation)
-    
-    /*!
-     * Get the all outlines of all layer parts in this layer.
-     * 
-     * \param external_polys_only Whether to only include the outermost outline of each layer part
-     * \return A collection of all the outline polygons
-     */
-    Polygons getOutlines(bool external_polys_only = false);
-    
-    /*!
-     * Get the all outlines of all layer parts in this layer.
-     * Add those polygons to @p result.
-     * 
-     * \param external_polys_only Whether to only include the outermost outline of each layer part
-     * \param result The result: a collection of all the outline polygons
-     */
-    void getOutlines(Polygons& result, bool external_polys_only = false);
-    
-    /*!
-     * Collects the second wall of every part, or the outer wall if it has no second, or the outline, if it has no outer wall.
-     * \return The collection of all polygons thus obtained
-     */
-    Polygons getSecondOrInnermostWalls();
-    
-    /*!
-     * Collects the second wall of every part, or the outer wall if it has no second, or the outline, if it has no outer wall.
-     * Add those polygons to @p result.
-     * \param result The result: the collection of all polygons thus obtained
-     */
-    void getSecondOrInnermostWalls(Polygons& result);
+    Polygons openLines; //!< A list of lines which were never hooked up into a 2D polygon. (Currently unused in normal operation)
 };
 
 /******************/
-class SupportLayer
-{
-public:
-    Polygons supportAreas; //!< normal support areas
-    Polygons roofs; //!< the support areas which are to be printed as denser roofs. Note that the roof areas and support areas are mutually exclusive.
-};
-
 class SupportStorage
 {
 public:
     bool generated; //!< whether generateSupportGrid(.) has completed (successfully)
         
-    int layer_nr_max_filled_layer; //!< the layer number of the uppermost layer with content
-    
-    std::vector<SupportLayer> supportLayers;
+    std::vector<Polygons> supportAreasPerLayer;
 
-    SupportStorage() : generated(false), layer_nr_max_filled_layer(-1) { }
-    ~SupportStorage(){ supportLayers.clear(); }
+    SupportStorage(){}
+    ~SupportStorage(){supportAreasPerLayer.clear(); }
 };
 /******************/
 
-class SliceMeshStorage : public SettingsMessenger // passes on settings from a Mesh object
+class SliceMeshStorage
 {
 public:
+    SettingsBase* settings;
     std::vector<SliceLayer> layers;
 
-    int layer_nr_max_filled_layer; //!< the layer number of the uppermost layer with content
-    
     RetractionConfig retraction_config;
     GCodePathConfig inset0_config;
     GCodePathConfig insetX_config;
     GCodePathConfig skin_config;
-    std::vector<GCodePathConfig> infill_config;
-    GCodePathConfig wall_reinforcement_config;
+    GCodePathConfig infill_config[MAX_SPARSE_COMBINE];
     
-    SliceMeshStorage(SettingsBaseVirtual* settings)
-    : SettingsMessenger(settings), layer_nr_max_filled_layer(0), inset0_config(&retraction_config, "WALL-OUTER"), insetX_config(&retraction_config, "WALL-INNER"), skin_config(&retraction_config, "SKIN"), wall_reinforcement_config(&retraction_config, "SUPPORT")
+    SliceMeshStorage(SettingsBase* settings)
+    : settings(settings), inset0_config(&retraction_config, "WALL-OUTER"), insetX_config(&retraction_config, "WALL-INNER"), skin_config(&retraction_config, "SKIN")
     {
-        infill_config.reserve(MAX_INFILL_COMBINE);
-        for(int n=0; n<MAX_INFILL_COMBINE; n++)
-            infill_config.emplace_back(&retraction_config, "FILL");
+        for(int n=0; n<MAX_SPARSE_COMBINE; n++)
+            infill_config[n] = GCodePathConfig(&retraction_config, "FILL");
     }
 };
 
-class SliceDataStorage : public SettingsMessenger, NoCopy
+class SliceDataStorage
 {
 public:
-    MeshGroup* meshgroup; // needed to pass on the per extruder settings.. (TODO: put this somewhere else? Put the per object settings here directly, or a pointer only to the per object settings.)
-    
     Point3 model_size, model_min, model_max;
+    Polygons skirt;
+    Polygons raftOutline;               //Storage for the outline of the raft. Will be filled with lines when the GCode is generated.
+    std::vector<Polygons> oozeShield;        //oozeShield per layer
     std::vector<SliceMeshStorage> meshes;
-    
-    std::vector<RetractionConfig> retraction_config_per_extruder; //!< used for support, skirt, etc.
-    RetractionConfig retraction_config; //!< The retraction config used as fallback when getting the per_extruder_config or the mesh config was impossible (for travelConfig)
-    
-    GCodePathConfig travel_config; //!< The config used for travel moves (only the speed and retraction config are set!)
-    std::vector<GCodePathConfig> skirt_config; //!< config for skirt per extruder
-    std::vector<CoastingConfig> coasting_config; //!< coasting config per extruder
-    
-    GCodePathConfig raft_base_config;
-    GCodePathConfig raft_interface_config;
-    GCodePathConfig raft_surface_config;
-    
+
+    RetractionConfig retraction_config;
+    GCodePathConfig skirt_config;
     GCodePathConfig support_config;
-    GCodePathConfig support_roof_config;
     
     SupportStorage support;
-    
-    Polygons skirt[MAX_EXTRUDERS]; //!< Skirt polygons per extruder, ordered from inner to outer polygons
-    Polygons raftOutline;               //Storage for the outline of the raft. Will be filled with lines when the GCode is generated.
-    
-    int max_object_height_second_to_last_extruder; //!< Used in multi-extrusion: the layer number beyond which all models are printed with the same extruder
-    PrimeTower primeTower;
-    
-    std::vector<Polygons> oozeShield;        //oozeShield per layer
-    Polygons draft_protection_shield; //!< The polygons for a heightened skirt which protects from warping by gusts of wind and acts as a heated chamber.
+    Polygons wipeTower;
     Point wipePoint;
     
-    std::vector<RetractionConfig> initializeRetractionConfigs()
-    {
-        std::vector<RetractionConfig> ret;
-        ret.resize(meshgroup->getExtruderCount()); // initializes with constructor RetractionConfig()
-        return ret;
-    }
-    std::vector<GCodePathConfig> initializeSkirtConfigs()
-    {
-        std::vector<GCodePathConfig> ret;
-        for (int extruder = 0; extruder < meshgroup->getExtruderCount(); extruder++)
-        {
-            RetractionConfig* extruder_retraction_config = &retraction_config_per_extruder[extruder];
-            skirt_config.emplace_back(extruder_retraction_config, "SKIRT");
-        }
-        return ret;
-    }
-    
-    /*!
-     * \brief Creates a new slice data storage that stores the slice data of the
-     * specified mesh group.
-     * 
-     * It will obtain the settings from the mesh group too. The mesh group is
-     * not yet sliced in this constructor. If no mesh group is provided, an
-     * empty one will be created.
-     * 
-     * \param meshgroup The mesh group to load into this data storage, if any.
-     */
-    SliceDataStorage(MeshGroup* meshgroup);
-    
-    ~SliceDataStorage()
+    SliceDataStorage()
+    : skirt_config(&retraction_config, "SKIRT"), support_config(&retraction_config, "SUPPORT")
     {
     }
-    
-    /*!
-     * Get all outlines within a given layer.
-     * 
-     * \param layer_nr the index of the layer for which to get the outlines (negative layer numbers indicate the raft)
-     * \param include_helper_parts whether to include support and prime tower
-     * \param external_polys_only whether to disregard all hole polygons
-     */
-    Polygons getLayerOutlines(int layer_nr, bool include_helper_parts, bool external_polys_only = false);
-    
-    /*!
-     * Collects the second wall of every part, or the outer wall if it has no second, or the outline, if it has no outer wall.
-     * 
-     * For helper parts the outlines are used.
-     * 
-     * \param layer_nr the index of the layer for which to get the outlines (negative layer numbers indicate the raft)
-     * \param include_helper_parts whether to include support and prime tower
-     */
-    Polygons getLayerSecondOrInnermostWalls(int layer_nr, bool include_helper_parts);
-    
-    /*!
-     * Get the extruder numbers of all extruders used in a given layer.
-     * 
-     * \param layer_nr the index of the layer for which to get the extruders used (negative layer numbers indicate the raft)
-     * \return a vector of bools indicating whether the extruder with corresponding index is used in this layer.
-     */
-    std::vector<bool> getExtrudersUsed(int layer_nr);
-    
-    /*!
-     * Get the extruders used.
-     * 
-     * \return a vector of bools indicating whether the extruder with corresponding index is used in this layer.
-     */
-    std::vector<bool> getExtrudersUsed();
 };
 
 }//namespace cura

src/slicer.cpp

@@ -5,7 +5,7 @@
 #include "utils/logoutput.h"
 
 #include "slicer.h"
-#include "debug.h" // TODO remove
+#include "polygonOptimizer.h"
 
 namespace cura {
 
@@ -13,7 +13,6 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
 {
     Polygons openPolygonList;
     
-    // connect line segments
     for(unsigned int startSegment=0; startSegment < segmentList.size(); startSegment++)
     {
         if (segmentList[startSegment].addedToPolygon)
@@ -31,22 +30,20 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
             Point p0 = segmentList[segmentIndex].end;
             poly.add(p0);
             int nextIndex = -1;
-            const MeshFace& face = mesh->faces[segmentList[segmentIndex].faceIndex];
+            MeshFace* face = &mesh->faces[segmentList[segmentIndex].faceIndex];
             for(unsigned int i=0;i<3;i++)
             {
-                decltype(face_idx_to_segment_index.begin()) it;
-                if (face.connected_face_index[i] > -1 && (it = face_idx_to_segment_index.find(face.connected_face_index[i])) != face_idx_to_segment_index.end())
+                if (face->connected_face_index[i] > -1 && face_idx_to_segment_index.find(face->connected_face_index[i]) != face_idx_to_segment_index.end())
                 {
-                    int index = (*it).second;
-                    Point p1 = segmentList[index].start;
+                    Point p1 = segmentList[face_idx_to_segment_index[face->connected_face_index[i]]].start;
                     Point diff = p0 - p1;
                     if (shorterThen(diff, MM2INT(0.01)))
                     {
-                        if (index == static_cast<int>(startSegment))
+                        if (face_idx_to_segment_index[face->connected_face_index[i]] == static_cast<int>(startSegment))
                             canClose = true;
-                        if (segmentList[index].addedToPolygon)
+                        if (segmentList[face_idx_to_segment_index[face->connected_face_index[i]]].addedToPolygon)
                             continue;
-                        nextIndex = index;
+                        nextIndex = face_idx_to_segment_index[face->connected_face_index[i]];
                     }
                 }
             }
@@ -61,8 +58,6 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
     }
     //Clear the segmentList to save memory, it is no longer needed after this point.
     segmentList.clear();
-    
-    // TODO: (?) for mesh surface mode: connect open polygons. Maybe the above algorithm can create two open polygons which are actually connected when the starting segment is in the middle between the two open polygons.
 
     //Connecting polygons that are not closed yet, as models are not always perfect manifold we need to join some stuff up to get proper polygons
     //First link up polygon ends that are within 2 microns.
@@ -93,11 +88,9 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
         }
     }
 
-    if (mesh->getSettingAsSurfaceMode("magic_mesh_surface_mode") == ESurfaceMode::NORMAL)
+    //Next link up all the missing ends, closing up the smallest gaps first. This is an inefficient implementation which can run in O(n*n*n) time.
+    while(1)
     {
-        //Next link up all the missing ends, closing up the smallest gaps first. This is an inefficient implementation which can run in O(n*n*n) time.
-        while(1)
-        {
         int64_t bestScore = MM2INT(10.0) * MM2INT(10.0);
         unsigned int bestA = -1;
         unsigned int bestB = -1;
@@ -161,7 +154,7 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
             }
         }
     }
-    }
+
     if (extensive_stitching)
     {
         //For extensive stitching find 2 open polygons that are touching 2 closed polygons.
@@ -173,7 +166,7 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
         {
             unsigned int bestA = -1;
             unsigned int bestB = -1;
-            GapCloserResult bestResult;
+            gapCloserResult bestResult;
             bestResult.len = POINT_MAX;
             bestResult.polygonIdx = -1;
             bestResult.pointIdxA = -1;
@@ -184,7 +177,7 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
                 if (openPolygonList[i].size() < 1) continue;
                 
                 {
-                    GapCloserResult res = findPolygonGapCloser(openPolygonList[i][0], openPolygonList[i][openPolygonList[i].size()-1]);
+                    gapCloserResult res = findPolygonGapCloser(openPolygonList[i][0], openPolygonList[i][openPolygonList[i].size()-1]);
                     if (res.len > 0 && res.len < bestResult.len)
                     {
                         bestA = i;
@@ -197,7 +190,7 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
                 {
                     if (openPolygonList[j].size() < 1 || i == j) continue;
                     
-                    GapCloserResult res = findPolygonGapCloser(openPolygonList[i][0], openPolygonList[j][openPolygonList[j].size()-1]);
+                    gapCloserResult res = findPolygonGapCloser(openPolygonList[i][0], openPolygonList[j][openPolygonList[j].size()-1]);
                     if (res.len > 0 && res.len < bestResult.len)
                     {
                         bestA = i;
@@ -282,7 +275,7 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
     for(unsigned int i=0;i<openPolygonList.size();i++)
     {
         if (openPolygonList[i].size() > 0)
-            openPolylines.add(openPolygonList[i]);
+            openPolygons.newPoly() = openPolygonList[i];
     }
 
     //Remove all the tiny polygons, or polygons that are not closed. As they do not contribute to the actual print.
@@ -305,9 +298,9 @@ void SlicerLayer::makePolygons(Mesh* mesh, bool keep_none_closed, bool extensive
     }
 
     //Finally optimize all the polygons. Every point removed saves time in the long run.
-    polygonList.simplify();
+    optimizePolygons(polygonList);
     
-    polygonList.removeDegenerateVerts(); // remove verts connected to overlapping line segments
+    polygonList = polygonList.removeDegenerateVerts(); // remove verts connected to overlapping line segments
     
     int xy_offset = mesh->getSettingInMicrons("xy_offset");
     if (xy_offset != 0)
@@ -328,9 +321,9 @@ Slicer::Slicer(Mesh* mesh, int initial, int thickness, int layer_count, bool kee
         layers[layer_nr].z = initial + thickness * layer_nr;
     }
     
-    for(unsigned int mesh_idx = 0; mesh_idx < mesh->faces.size(); mesh_idx++)
+    for(unsigned int i=0; i<mesh->faces.size(); i++)
     {
-        MeshFace& face = mesh->faces[mesh_idx];
+        MeshFace& face = mesh->faces[i];
         Point3 p0 = mesh->vertices[face.vertex_index[0]].p;
         Point3 p1 = mesh->vertices[face.vertex_index[1]].p;
         Point3 p2 = mesh->vertices[face.vertex_index[2]].p;
@@ -340,8 +333,8 @@ Slicer::Slicer(Mesh* mesh, int initial, int thickness, int layer_count, bool kee
         if (p2.z < minZ) minZ = p2.z;
         if (p1.z > maxZ) maxZ = p1.z;
         if (p2.z > maxZ) maxZ = p2.z;
-        int32_t layer_max = (maxZ - initial) / thickness;
-        for(int32_t layer_nr = (minZ - initial) / thickness; layer_nr <= layer_max; layer_nr++)
+        
+        for(int32_t layer_nr = (minZ - initial) / thickness; layer_nr <= (maxZ - initial) / thickness; layer_nr++)
         {
             int32_t z = layer_nr * thickness + initial;
             if (z < minZ) continue;
@@ -368,8 +361,8 @@ Slicer::Slicer(Mesh* mesh, int initial, int thickness, int layer_count, bool kee
                 //  on the slice would create two segments
                 continue;
             }
-            layers[layer_nr].face_idx_to_segment_index.insert(std::make_pair(mesh_idx, layers[layer_nr].segmentList.size()));
-            s.faceIndex = mesh_idx;
+            layers[layer_nr].face_idx_to_segment_index[i] = layers[layer_nr].segmentList.size();
+            s.faceIndex = i;
             s.addedToPolygon = false;
             layers[layer_nr].segmentList.push_back(s);
         }

src/slicer.h

@@ -18,7 +18,7 @@ public:
     bool addedToPolygon;
 };
 
-class ClosePolygonResult
+class closePolygonResult
 {   //The result of trying to find a point on a closed polygon line. This gives back the point index, the polygon index, and the point of the connection.
     //The line on which the point lays is between pointIdx-1 and pointIdx
 public:
@@ -26,7 +26,7 @@ public:
     int polygonIdx;
     unsigned int pointIdx;
 };
-class GapCloserResult
+class gapCloserResult
 {
 public:
     int64_t len;
@@ -40,20 +40,20 @@ class SlicerLayer
 {
 public:
     std::vector<SlicerSegment> segmentList;
-    std::unordered_map<int, int> face_idx_to_segment_index; // topology
+    std::map<int, int> face_idx_to_segment_index;
     
     int z;
     Polygons polygonList;
-    Polygons openPolylines;
+    Polygons openPolygons;
     
     void makePolygons(Mesh* mesh, bool keepNoneClosed, bool extensiveStitching);
 
 private:
-    GapCloserResult findPolygonGapCloser(Point ip0, Point ip1)
+    gapCloserResult findPolygonGapCloser(Point ip0, Point ip1)
     {
-        GapCloserResult ret;
-        ClosePolygonResult c1 = findPolygonPointClosestTo(ip0);
-        ClosePolygonResult c2 = findPolygonPointClosestTo(ip1);
+        gapCloserResult ret;
+        closePolygonResult c1 = findPolygonPointClosestTo(ip0);
+        closePolygonResult c2 = findPolygonPointClosestTo(ip1);
         if (c1.polygonIdx < 0 || c1.polygonIdx != c2.polygonIdx)
         {
             ret.len = -1;
@@ -102,9 +102,9 @@ private:
         return ret;
     }
 
-    ClosePolygonResult findPolygonPointClosestTo(Point input)
+    closePolygonResult findPolygonPointClosestTo(Point input)
     {
-        ClosePolygonResult ret;
+        closePolygonResult ret;
         for(unsigned int n=0; n<polygonList.size(); n++)
         {
             Point p0 = polygonList[n][polygonList[n].size()-1];

src/support.cpp

@@ -3,71 +3,9 @@
 
 #include <cmath> // sqrt
 #include <utility> // pair
-#include "Progress.h"
 
 namespace cura 
 {
-    
-    
-Polygons AreaSupport::join(Polygons& supportLayer_up, Polygons& supportLayer_this, int64_t supportJoinDistance, int64_t smoothing_distance, int min_smoothing_area, bool conical_support, int64_t conical_support_offset, int64_t conical_smallest_breadth)
-{
-    Polygons joined;
-    if (conical_support)
-    {
-        Polygons insetted = supportLayer_up.offset(-conical_smallest_breadth/2);
-        Polygons small_parts = supportLayer_up.difference(insetted.offset(conical_smallest_breadth/2+20));
-        joined = supportLayer_this.unionPolygons(supportLayer_up.offset(conical_support_offset))
-                                .unionPolygons(small_parts);
-    }
-    else 
-    {
-        joined = supportLayer_this.unionPolygons(supportLayer_up);
-    }
-    // join different parts
-    if (supportJoinDistance > 0)
-    {
-        joined = joined.offset(supportJoinDistance)
-                        .offset(-supportJoinDistance);
-    }
-    if (smoothing_distance > 0)
-        joined = joined.smooth(smoothing_distance, min_smoothing_area);
-    
-    return joined;
-}
-
-void AreaSupport::generateSupportAreas(SliceDataStorage& storage, unsigned int layer_count, CommandSocket* commandSocket)
-{
-    // initialization of supportAreasPerLayer
-    for (unsigned int layer_idx = 0; layer_idx < layer_count ; layer_idx++)
-        storage.support.supportLayers.emplace_back();
-    
-    for(unsigned int mesh_idx = 0; mesh_idx < storage.meshes.size(); mesh_idx++)
-    {
-        SliceMeshStorage& mesh = storage.meshes[mesh_idx];
-        std::vector<Polygons> supportAreas;
-        supportAreas.resize(layer_count, Polygons());
-        generateSupportAreas(storage, mesh_idx, layer_count, supportAreas, commandSocket);
-        
-        if (mesh.getSettingBoolean("support_roof_enable"))
-        {
-            generateSupportRoofs(storage, supportAreas, layer_count, mesh.getSettingInMicrons("layer_height"), mesh.getSettingInMicrons("support_roof_height"), commandSocket);
-        }
-        else 
-        {
-            for (unsigned int layer_idx = 0; layer_idx < layer_count ; layer_idx++)
-            {
-                storage.support.supportLayers[layer_idx].supportAreas.add(supportAreas[layer_idx]);
-            }
-        }
-    }
-    
-    for (unsigned int layer_idx = 0; layer_idx < layer_count ; layer_idx++)
-    {
-        storage.support.supportLayers[layer_idx].supportAreas = storage.support.supportLayers[layer_idx].supportAreas.unionPolygons();
-    }
-    
-    storage.support.generated = true;
-}
 
 /* 
  * Algorithm:
@@ -80,45 +18,40 @@ void AreaSupport::generateSupportAreas(SliceDataStorage& storage, unsigned int l
  * 
  * for support buildplate only: purge all support not connected to buildplate
  */
-void AreaSupport::generateSupportAreas(SliceDataStorage& storage, unsigned int mesh_idx, unsigned int layer_count, std::vector<Polygons>& supportAreas, CommandSocket* commandSocket)
+void generateSupportAreas(SliceDataStorage& storage, SliceMeshStorage* object, int layer_count)
 {
-    SliceMeshStorage& mesh = storage.meshes[mesh_idx];
-        
     // given settings
-    ESupportType support_type = mesh.getSettingAsSupportType("support_type");
+    ESupportType support_type = object->settings->getSettingAsSupportType("support_type");
     
-    if (!mesh.getSettingBoolean("support_enable"))
+    storage.support.generated = false;
+    if (!object->settings->getSettingBoolean("support_enable"))
         return;
-    if (support_type == ESupportType::NONE)
+    if (support_type == Support_None)
         return;
+
+    double supportAngle = object->settings->getSettingInAngleRadians("support_angle");
+    bool supportOnBuildplateOnly = support_type == Support_PlatformOnly;
+    int supportZDistance = object->settings->getSettingInMicrons("support_z_distance");
+    int supportZDistanceBottom = object->settings->getSettingInMicrons("support_bottom_distance");
+    int supportZDistanceTop = object->settings->getSettingInMicrons("support_top_distance");
+    int supportJoinDistance = object->settings->getSettingInMicrons("support_join_distance");
+    int support_bottom_stair_step_height = object->settings->getSettingInMicrons("support_bottom_stair_step_height");
+    int smoothing_distance = object->settings->getSettingInMicrons("support_area_smoothing"); 
     
-    double supportAngle = mesh.getSettingInAngleRadians("support_angle");
-    bool supportOnBuildplateOnly = support_type == ESupportType::PLATFORM_ONLY;
-    int supportZDistance = mesh.getSettingInMicrons("support_z_distance");
-    int supportZDistanceBottom = mesh.getSettingInMicrons("support_bottom_distance");
-    int supportZDistanceTop = mesh.getSettingInMicrons("support_top_distance");
-    int join_distance = mesh.getSettingInMicrons("support_join_distance");
-    int support_bottom_stair_step_height = mesh.getSettingInMicrons("support_bottom_stair_step_height");
-    int smoothing_distance = mesh.getSettingInMicrons("support_area_smoothing"); 
-    
-    int extension_offset = mesh.getSettingInMicrons("support_offset");
-    
-    int supportTowerDiameter = mesh.getSettingInMicrons("support_tower_diameter");
-    int supportMinAreaSqrt = mesh.getSettingInMicrons("support_minimal_diameter");
-    double supportTowerRoofAngle = mesh.getSettingInAngleRadians("support_tower_roof_angle");
+    int supportTowerDiameter = object->settings->getSettingInMicrons("support_tower_diameter");
+    int supportMinAreaSqrt = object->settings->getSettingInMicrons("support_minimal_diameter");
+    double supportTowerRoofAngle = object->settings->getSettingInAngleRadians("support_tower_roof_angle");
     
     //std::cerr <<" towerDiameter=" << towerDiameter <<", supportMinAreaSqrt=" << supportMinAreaSqrt << std::endl;
     
     int min_smoothing_area = 100*100; // minimal area for which to perform smoothing
     int z_layer_distance_tower = 1; // start tower directly below overhang point
         
-    int layerThickness = mesh.getSettingInMicrons("layer_height");
-    int extrusionWidth = mesh.getSettingInMicrons("support_line_width"); 
-    int supportXYDistance = mesh.getSettingInMicrons("support_xy_distance") + extrusionWidth / 2;
+    int layerThickness = object->settings->getSettingInMicrons("layer_height");
+    int extrusionWidth = object->settings->getSettingInMicrons("wall_line_width_x"); // TODO check for layer0extrusionWidth!
+    int supportXYDistance = object->settings->getSettingInMicrons("support_xy_distance") + extrusionWidth / 2;
     
-    bool conical_support = mesh.getSettingBoolean("support_conical_enabled");
-    double conical_support_angle = mesh.getSettingInAngleRadians("support_conical_angle");
-    int64_t conical_smallest_breadth = mesh.getSettingInMicrons("support_conical_min_width");
+
     
     // derived settings:
     
@@ -129,22 +62,12 @@ void AreaSupport::generateSupportAreas(SliceDataStorage& storage, unsigned int m
     int supportLayerThickness = layerThickness;
     
     int layerZdistanceTop       = supportZDistanceTop / supportLayerThickness + 1; // support must always be 1 layer below overhang
-    unsigned int layerZdistanceBottom    = std::max(0, supportZDistanceBottom / supportLayerThickness); 
+    int layerZdistanceBottom    = supportZDistanceBottom / supportLayerThickness; 
 
     double tanAngle = tan(supportAngle) - 0.01;  // the XY-component of the supportAngle
     int maxDistFromLowerLayer = tanAngle * supportLayerThickness; // max dist which can be bridged
     
-    int64_t conical_support_offset;
-    if (conical_support_angle > 0) 
-    {
-        conical_support_offset = (tan(conical_support_angle) - 0.01) * supportLayerThickness;
-    }
-    else 
-    {
-        conical_support_offset = -(tan(-conical_support_angle) - 0.01) * supportLayerThickness;
-    }
-    
-    unsigned int support_layer_count = layer_count;
+    int support_layer_count = layer_count;
     
     double tanTowerRoofAngle = tan(supportTowerRoofAngle);
     int towerRoofExpansionDistance = layerThickness / tanTowerRoofAngle;
@@ -162,57 +85,47 @@ void AreaSupport::generateSupportAreas(SliceDataStorage& storage, unsigned int m
     // computation
         
     
+    std::vector<Polygons> joinedLayers; // join model layers of all meshes into polygons and store small areas which need tower support
     std::vector<std::pair<int, std::vector<Polygons>>> overhang_points; // stores overhang_points along with the layer index at which the overhang point occurs
-    AreaSupport::detectOverhangPoints(storage, mesh, overhang_points, layer_count, supportMinAreaSqrt, extrusionWidth);
+    AreaSupport::joinMeshesAndDetectOverhangPoints(storage, joinedLayers, overhang_points, layer_count, supportMinAreaSqrt, extrusionWidth);
         
     
-    bool still_in_upper_empty_layers = true;
+    // initialization of supportAreasPerLayer
+    for (int layer_idx = 0; layer_idx < layer_count ; layer_idx++)
+        storage.support.supportAreasPerLayer.emplace_back();
+
+    
     int overhang_points_pos = overhang_points.size() - 1;
     Polygons supportLayer_last;
     std::vector<Polygons> towerRoofs;
-    for (unsigned int layer_idx = support_layer_count - 1 - layerZdistanceTop; layer_idx != (unsigned int) -1 ; layer_idx--)
+    for (int layer_idx = support_layer_count - 1 - layerZdistanceTop; layer_idx >= 0 ; layer_idx--)
     {
         
-        Polygons overhang;
-        {
-            // compute basic overhang and put in right layer ([layerZdistanceTOp] layers below)
-            Polygons supportLayer_supportee = mesh.layers[layer_idx+layerZdistanceTop].getOutlines();
-            Polygons supportLayer_supporter = storage.getLayerOutlines(layer_idx-1+layerZdistanceTop, false);
-            
-            Polygons supportLayer_supported =  supportLayer_supporter.offset(maxDistFromLowerLayer);
-            Polygons basic_overhang = supportLayer_supportee.difference(supportLayer_supported);
         
-//         Polygons support_extension = basic_overhang.offset(maxDistFromLowerLayer);
-//         support_extension = support_extension.intersection(supportLayer_supported);
-//         support_extension = support_extension.intersection(supportLayer_supportee);
-//         
-//         Polygons overhang =  basic_overhang.unionPolygons(support_extension);
-//         presumably the computation above is slower than the one below
-            
-            Polygons overhang_extented = basic_overhang.offset(maxDistFromLowerLayer + 100); // +100 for easier joining with support from layer above
-            overhang = overhang_extented.intersection(supportLayer_supported.unionPolygons(supportLayer_supportee));
-            
-            /*            layer 2
-            * layer 1 ______________|
-            * _______|         ^^^^^ basic overhang
-            * 
-            * ^^^^^^^ supporter
-            * ^^^^^^^^^^^^^^^^^ supported
-            * ^^^^^^^^^^^^^^^^^^^^^^ supportee
-            *         ^^^^^^^^^^^^^^^^^^^^^^^^ overhang extended
-            *         ^^^^^^^^^      overhang extensions
-            *         ^^^^^^^^^^^^^^ overhang
-            */
-        }
+        // compute basic overhang and put in right layer ([layerZdistanceTOp] layers below)
+        Polygons supportLayer_supportee =  joinedLayers[layer_idx+layerZdistanceTop];
+        Polygons supportLayer_supported =  joinedLayers[layer_idx-1+layerZdistanceTop].offset(maxDistFromLowerLayer);
+        Polygons basic_overhang = supportLayer_supportee.difference(supportLayer_supported);
+        
+        Polygons support_extension = basic_overhang.offset(maxDistFromLowerLayer);
+        support_extension = support_extension.intersection(supportLayer_supported);
+        support_extension = support_extension.intersection(supportLayer_supportee);
+        
+        Polygons overhang =  basic_overhang.unionPolygons(support_extension);
+        
+        /* supported
+         * .................
+         *         ______________|
+         * _______|         ^^^^^ basic overhang
+         * 
+         *         ^^^^^^^^^      overhang extensions
+         *         ^^^^^^^^^^^^^^ overhang
+         */
 
+        
         Polygons& supportLayer_this = overhang; 
         
-        if (extension_offset)
-        {
-            supportLayer_this = supportLayer_this.offset(extension_offset);
-        }
-        
-        supportLayer_this.simplify(50); // TODO: hardcoded value!
+        supportLayer_this = supportLayer_this.simplify(50); // TODO: hardcoded value!
         
         if (supportMinAreaSqrt > 0)
         {
@@ -221,58 +134,68 @@ void AreaSupport::generateSupportAreas(SliceDataStorage& storage, unsigned int m
             // handle towers
             AreaSupport::handleTowers(supportLayer_this, towerRoofs, overhang_points, overhang_points_pos, layer_idx, towerRoofExpansionDistance, supportTowerDiameter, supportMinAreaSqrt, layer_count, z_layer_distance_tower);
         }
-    
+        
+        
         if (layer_idx+1 < support_layer_count)
-        { // join with support from layer up                
-            supportLayer_this = AreaSupport::join(supportLayer_last, supportLayer_this, join_distance, smoothing_distance, min_smoothing_area, conical_support, conical_support_offset, conical_smallest_breadth);
+        { // join with support from layer up
+            Polygons& supportLayer_up = supportLayer_last;
+            
+            Polygons joined = supportLayer_this.unionPolygons(supportLayer_up);
+            // join different parts
+            if (supportJoinDistance > 0)
+            {
+                joined = joined.offset(supportJoinDistance);
+                joined = joined.offset(-supportJoinDistance);
+            }
+            if (smoothing_distance > 0)
+                joined = joined.smooth(smoothing_distance, min_smoothing_area);
+        
+            // remove layer
+            Polygons insetted = joined.difference(joinedLayers[layer_idx]);
+            supportLayer_this = insetted;                
+            
         }
         
         
+        supportLayer_last = supportLayer_this;
+        
+        // inset using X/Y distance
+        if (supportLayer_this.size() > 0)
+            supportLayer_this = supportLayer_this.difference(joinedLayers[layer_idx].offset(supportXYDistance));
+        
         // move up from model
         if (layerZdistanceBottom > 0 && layer_idx >= layerZdistanceBottom)
         {
             int stepHeight = support_bottom_stair_step_height / supportLayerThickness + 1;
             int bottomLayer = ((layer_idx - layerZdistanceBottom) / stepHeight) * stepHeight;
-            supportLayer_this = supportLayer_this.difference(storage.getLayerOutlines(bottomLayer, false));
+            supportLayer_this = supportLayer_this.difference(joinedLayers[bottomLayer]);
         }
         
+        storage.support.supportAreasPerLayer[layer_idx] = supportLayer_this;
         
-        supportLayer_last = supportLayer_this;
-        
-        
-        // inset using X/Y distance
-        if (supportLayer_this.size() > 0)
-            supportLayer_this = supportLayer_this.difference(storage.getLayerOutlines(layer_idx, false).offset(supportXYDistance));
-        
-        supportAreas[layer_idx] = supportLayer_this;
-        
-        if (still_in_upper_empty_layers && supportLayer_this.size() > 0)
-        {
-            storage.support.layer_nr_max_filled_layer = layer_idx;
-            still_in_upper_empty_layers = false;
-        }
-        
-        Progress::messageProgress(Progress::Stage::SUPPORT, storage.meshes.size() * mesh_idx + support_layer_count - layer_idx, support_layer_count * storage.meshes.size(), commandSocket);
+        logProgress("support", support_layer_count - layer_idx, support_layer_count);
     }
     
     // do stuff for when support on buildplate only
     if (supportOnBuildplateOnly)
     {
-        Polygons touching_buildplate = supportAreas[0]; // TODO: not working for conical support!
-        for (unsigned int layer_idx = 1 ; layer_idx < storage.support.supportLayers.size() ; layer_idx++)
+        Polygons touching_buildplate = storage.support.supportAreasPerLayer[0];
+        for (unsigned int layer_idx = 1 ; layer_idx < storage.support.supportAreasPerLayer.size() ; layer_idx++)
         {
-            Polygons& supportLayer = supportAreas[layer_idx];
+            Polygons& supportLayer = storage.support.supportAreasPerLayer[layer_idx];
             
             touching_buildplate = supportLayer.intersection(touching_buildplate); // from bottom to top, support areas can only decrease!
             
-            supportAreas[layer_idx] = touching_buildplate;
+            storage.support.supportAreasPerLayer[layer_idx] = touching_buildplate;
         }
     }
+
+    storage.support.generated = true;
 }
 
-void AreaSupport::detectOverhangPoints(
+void AreaSupport::joinMeshesAndDetectOverhangPoints(
     SliceDataStorage& storage,
-    SliceMeshStorage& mesh, 
+    std::vector<Polygons>& joinedLayers,
     std::vector<std::pair<int, std::vector<Polygons>>>& overhang_points, // stores overhang_points along with the layer index at which the overhang point occurs)
     int layer_count,
     int supportMinAreaSqrt,
@@ -281,26 +204,30 @@ void AreaSupport::detectOverhangPoints(
 {
     for (int layer_idx = 0 ; layer_idx < layer_count ; layer_idx++)
     {
-        SliceLayer& layer = mesh.layers[layer_idx];
-        for (SliceLayerPart& part : layer.parts)
+        joinedLayers.emplace_back();
+        for (SliceMeshStorage& mesh : storage.meshes)
         {
-            if (part.outline.outerPolygon().area() < supportMinAreaSqrt * supportMinAreaSqrt) 
+            SliceLayer& layer = mesh.layers[layer_idx];
+            for (SliceLayerPart& part : layer.parts)
             {
-                Polygons part_poly_computed;
-                Polygons& part_poly = (part.insets.size() > 0)? part.insets[0] : part_poly_computed; // don't copy inset if its already computed
-                if (part.insets.size() == 0) { part_poly_computed = part.outline.offset(-extrusionWidth/2); }
                 
-                if (part_poly.size() > 0)
+                if (part.outline[0].area() < supportMinAreaSqrt * supportMinAreaSqrt) 
                 {
-                    if (overhang_points.size() > 0 && overhang_points.back().first == layer_idx)
-                        overhang_points.back().second.push_back(part_poly);
-                    else 
+                    Polygons part_poly = part.outline.offset(-extrusionWidth/2);
+                    if (part_poly.size() > 0)
                     {
-                        std::vector<Polygons> small_part_polys;
-                        small_part_polys.push_back(part_poly);
-                        overhang_points.emplace_back<std::pair<int, std::vector<Polygons>>>(std::make_pair(layer_idx, small_part_polys));
+                        if (overhang_points.size() > 0 && overhang_points.back().first == layer_idx)
+                            overhang_points.back().second.push_back(part_poly);
+                        else 
+                        {
+                            std::vector<Polygons> small_part_polys;
+                            small_part_polys.push_back(part_poly);
+                            overhang_points.emplace_back<std::pair<int, std::vector<Polygons>>>(std::make_pair(layer_idx, small_part_polys));
+                        }
                     }
+                    
                 }
+                joinedLayers.back() = joinedLayers.back().unionPolygons(part.outline);
                 
             }
         }
@@ -409,28 +336,6 @@ void AreaSupport::handleWallStruts(
 }
 
 
-void AreaSupport::generateSupportRoofs(SliceDataStorage& storage, std::vector<Polygons>& supportAreas,  unsigned int layer_count, int layerThickness, int support_roof_height, CommandSocket* commandSocket)
-{
-    int roof_layer_count = support_roof_height / layerThickness;
-    
-    std::vector<SupportLayer>& supportLayers = storage.support.supportLayers;
-    for (unsigned int layer_idx = 0; layer_idx < layer_count; layer_idx++)
-    {
-        SupportLayer& layer = supportLayers[layer_idx];
-        
-        if (layer_idx + roof_layer_count < supportLayers.size())
-        {
-            Polygons roofs = supportAreas[layer_idx].difference(supportAreas[layer_idx + roof_layer_count]);
-            roofs.removeSmallAreas(1.0);
-            layer.roofs.add(roofs);
-            layer.supportAreas.add(supportAreas[layer_idx].difference(layer.roofs));
-        }
-        else 
-        {
-            layer.roofs.add(layer.supportAreas);
-        }
-    }
-}
 
 
 

src/support.h

@@ -3,64 +3,13 @@
 #define SUPPORT_H
 
 #include "sliceDataStorage.h"
-#include "MeshGroup.h"
-#include "commandSocket.h"
+#include "modelFile/modelFile.h"
 
 namespace cura {
 
 class AreaSupport {
 public:
 
-    /*!
-     * Generate the support areas and support roof areas for all models.
-     * \param storage data storage containing the input layer outline data and containing the output support storage per layer
-     * \param layer_count total number of layers
-     * \param commandSocket Socket over which to report the progress
-     */
-    static void generateSupportAreas(SliceDataStorage& storage, unsigned int layer_count, CommandSocket* commandSocket);
-        
-private:
-    /*!
-     * Generate support polygons over all layers for one object.
-     * 
-     * This function also handles small overhang areas (creates towers with larger diameter than just the overhang area) and single walls which could otherwise fall over.
-     * 
-     * \param storage data storage containing the input layer outline data
-     * \param mesh_idx The index of the object for which to generate support areas
-     * \param layer_count total number of layers
-     * \param commandSocket Socket over which to report the progress
-     */
-    static void generateSupportAreas(SliceDataStorage& storage, unsigned int mesh_idx, unsigned int layer_count, std::vector<Polygons>& supportAreas, CommandSocket* commandSocket);
-
-
-
-    /*!
-     * Generate support roof areas and non-roof areas for a given mesh.
-     * 
-     * \param storage Output storage: support area + support roof area output
-     * \param supportAreas The basic support areas for the current mesh
-     * \param commandSocket Socket over which to report the progress
-     * \param layerThickness The layer height
-     * \param support_roof_height The thickness of the hammock in z directiontt
-     */
-    static void generateSupportRoofs(SliceDataStorage& storage, std::vector<Polygons>& supportAreas,  unsigned int layer_count, int layerThickness, int support_roof_height, CommandSocket* commandSocket);
-
-    /*!
-     * Join current support layer with the support of the layer above, (make support conical) and perform smoothing etc operations.
-     * 
-     * \param supportLayer_up The support areas the layer above
-     * \param supportLayer_this The overhang areas of the current layer at hand
-     * \param supportJoinDistance The distance to be filled between two support areas
-     * \param smoothing_distance Maximal distance in the X/Y directions of a line segment which is to be smoothed out. 
-     * \param min_smoothing_area  minimal area for which to perform smoothing
-     * \param conical_support Whether the support should be conical instead of cylindrical
-     * \param conical_support_offset The offset determining the angle of the conical support
-     * \param conical_smallest_breadth The breadth of the smallest support area which is not to be redoces to a smaller size due to conical support.
-     * 
-     * \return The joined support areas for this layer.
-     */
-    static Polygons join(Polygons& supportLayer_up, Polygons& supportLayer_this, int64_t supportJoinDistance, int64_t smoothing_distance, int min_smoothing_area, bool conical_support, int64_t conical_support_offset, int64_t conical_smallest_breadth);
-
     /*!
      * Joins the layerpart outlines of all meshes and collects the overhang points (small areas).
      * \param storage input layer outline information
@@ -69,9 +18,9 @@ private:
      * \param supportMinAreaSqrt diameter of the minimal area which can be supported without a specialized strut
      * \param extrusionWidth extrusionWidth
      */
-    static void detectOverhangPoints(
+    static void joinMeshesAndDetectOverhangPoints(
         SliceDataStorage& storage,
-        SliceMeshStorage& mesh,
+        std::vector<Polygons>& joinedLayers,
         std::vector<std::pair<int, std::vector<Polygons>>>& overhang_points, 
         int layer_count,
         int supportMinAreaSqrt,
@@ -118,6 +67,18 @@ private:
     );
 };
 
+        
+/*!
+* Generate support polygons over all layers.
+* 
+* This function also handles small overhang areas (creates towers with larger diameter than just the overhang area) and single walls which could otherwise fall over.
+* 
+* \param storage data storage containing the input layer outline data and containing the output support storage per layer
+* \param object The object for which to generate support areas
+* \param layer_count total number of layers
+*/
+void generateSupportAreas(SliceDataStorage& storage, SliceMeshStorage* object, int layer_count);
+
 
 }//namespace cura
 

src/test.cpp

@@ -7,6 +7,10 @@
 
 
 
+#include "utils/polygonUtils.h"
+
+using namespace cura;
+
 /*
 #include "utils/intpoint.h"
 #include "utils/polygon.h"
@@ -162,8 +166,6 @@ void test_BucketGrid2D()
 /*
 #include <math.h> 
 #include "utils/gettime.h"
-#include "utils/polygonUtils.h"
-
 void test_findClosestConnection()
 {
     srand(1234);
@@ -265,11 +267,6 @@ void test_findClosestConnection()
 }
 */
 
-
-#include "utils/polygon.h"
-namespace cura
-{
-    
 void test_clipper()
 {
     Polygon p;
@@ -303,15 +300,13 @@ void test_clipper()
     Polygons polys;
     polys.add(p);
     
-//     polys.debugOutputHTML("output/problem_test.html", true);
-//     polys.offset(-400).debugOutputHTML("output/problem_test_offset.html", true);
-    polys.removeDegenerateVerts();
-//     polys.offset(-400).debugOutputHTML("output/problem_test_offset_solved.html", true);
+    polys.debugOutputHTML("output/problem_test.html", true);
+    polys.offset(-400).debugOutputHTML("output/problem_test_offset.html", true);
+    polys = polys.removeDegenerateVerts();
+    polys.offset(-400).debugOutputHTML("output/problem_test_offset_solved.html", true);
 }
 int main(int argc, char **argv)
 {
 //     test_findClosestConnection();
     test_clipper();
-}
-
-}//namespace cura
+}

src/timeEstimate.cpp

@@ -4,9 +4,6 @@
 #include <algorithm>
 #include "timeEstimate.h"
 
-namespace cura
-{
-    
 #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec)
 
 const double max_feedrate[TimeEstimateCalculator::NUM_AXIS] = {600, 600, 40, 25};
@@ -24,15 +21,8 @@ void TimeEstimateCalculator::setPosition(Position newPos)
     currentPosition = newPos;
 }
 
-void TimeEstimateCalculator::addTime(double time)
-{
-    extra_time += time;
-}
-
-
 void TimeEstimateCalculator::reset()
 {
-    extra_time = 0.0;
     blocks.clear();
 }
 
@@ -197,15 +187,14 @@ double TimeEstimateCalculator::calculate()
     forward_pass();
     recalculate_trapezoids();
     
-    double totalTime = extra_time;
+    double totalTime = 0;
     for(unsigned int n=0; n<blocks.size(); n++)
     {
-        Block& block = blocks[n];
-        double plateau_distance = block.decelerate_after - block.accelerate_until;
+        double plateau_distance = blocks[n].decelerate_after - blocks[n].accelerate_until;
         
-        totalTime += acceleration_time_from_distance(block.initial_feedrate, block.accelerate_until, block.acceleration);
-        totalTime += plateau_distance / block.nominal_feedrate;
-        totalTime += acceleration_time_from_distance(block.final_feedrate, (block.distance - block.decelerate_after), block.acceleration);
+        totalTime += acceleration_time_from_distance(blocks[n].initial_feedrate, blocks[n].accelerate_until, blocks[n].acceleration);
+        totalTime += plateau_distance / blocks[n].nominal_feedrate;
+        totalTime += acceleration_time_from_distance(blocks[n].final_feedrate, (blocks[n].distance - blocks[n].decelerate_after), blocks[n].acceleration);
     }
     return totalTime;
 }
@@ -294,7 +283,7 @@ void TimeEstimateCalculator::recalculate_trapezoids()
     Block *current;
     Block *next = nullptr;
 
-    for(unsigned int n=0; n<blocks.size(); n++)
+    for(unsigned int n=0; n<blocks.size(); n--)
     {
         current = next;
         next = &blocks[n];
@@ -316,5 +305,3 @@ void TimeEstimateCalculator::recalculate_trapezoids()
         next->recalculate_flag = false;
     }
 }
-
-}//namespace cura

src/timeEstimate.h

@@ -4,13 +4,10 @@
 #include <stdint.h>
 #include <vector>
 
-namespace cura
-{
-    
-/*!
- *  The TimeEstimateCalculator class generates a estimate of printing time calculated with acceleration in mind.
- *  Some of this code has been adapted from the Marlin sources.
- */
+/**
+    The TimeEstimateCalculator class generates a estimate of printing time calculated with acceleration in mind.
+    Some of this code has been addapted from the Marlin sources.
+*/
 
 class TimeEstimateCalculator
 {
@@ -54,8 +51,6 @@ public:
     };
 
 private:
-    double extra_time;
-    
     Position previous_feedrate;
     double previous_nominal_feedrate;
 
@@ -63,14 +58,8 @@ private:
 
     std::vector<Block> blocks;
 public:
-    TimeEstimateCalculator()
-    : extra_time(0.0)
-    {
-    }
-     
     void setPosition(Position newPos);
     void plan(Position newPos, double feedRate);
-    void addTime(double time);
     void reset();
     
     double calculate();
@@ -84,5 +73,4 @@ private:
     void planner_forward_pass_kernel(Block *previous, Block *current, Block *next);
 };
 
-}//namespace cura
 #endif//TIME_ESTIMATE_H

src/utils/AABB.h

@@ -1,125 +0,0 @@
-#ifndef AABB_H
-#define AABB_H
-
-
-#include <limits>
-#include "intpoint.h"
-#include "polygon.h"
-
-
-namespace cura
-{
-    
-    
-/* Axis aligned boundary box */
-class AABB
-{
-public:
-    Point min, max;
-
-    AABB()
-    : min(POINT_MAX, POINT_MAX), max(POINT_MIN, POINT_MIN)
-    {
-    }
-    AABB(Point&min, Point& max)
-    : min(min), max(max)
-    {
-    }
-    AABB(Polygons& polys)
-    : min(POINT_MAX, POINT_MAX), max(POINT_MIN, POINT_MIN)
-    {
-        calculate(polys);
-    }
-
-    void calculate(Polygons& polys)
-    {
-        min = Point(POINT_MAX, POINT_MAX);
-        max = Point(POINT_MIN, POINT_MIN);
-        for(unsigned int i=0; i<polys.size(); i++)
-        {
-            for(unsigned int j=0; j<polys[i].size(); j++)
-            {
-                include(polys[i][j]);
-            }
-        }
-    }
-
-    bool hit(const AABB& other) const
-    {
-        if (max.X < other.min.X) return false;
-        if (min.X > other.max.X) return false;
-        if (max.Y < other.min.Y) return false;
-        if (min.Y > other.max.Y) return false;
-        return true;
-    }
-    
-    /*!
-     * \brief Includes the specified point in the bounding box.
-     * 
-     * The bounding box is expanded if the point is not within the bounding box.
-     * 
-     * \param point The point to include in the bounding box.
-     */
-    void include(Point point)
-    {
-        min.X = std::min(min.X,point.X);
-        min.Y = std::min(min.Y,point.Y);
-        max.X = std::max(max.X,point.X);
-        max.Y = std::max(max.Y,point.Y);
-    }
-};
-
-/*!
-An Axis Aligned Bounding Box. Has a min and max vector, representing minimal and maximal coordinates in the three axes.
-*/
-struct AABB3D 
-{
-    Point3 min; //!< The minimal coordinates in x, y and z direction
-    Point3 max; //!< The maximal coordinates in x, y and z direction
-    
-    /*!
-     * Create an AABB3D with coordinates at the numeric limits.
-     */
-    AABB3D() 
-    : min(std::numeric_limits<int32_t>::max(), std::numeric_limits<int32_t>::max(), std::numeric_limits<int32_t>::max())
-    , max(std::numeric_limits<int32_t>::min(), std::numeric_limits<int32_t>::min(), std::numeric_limits<int32_t>::min())
-    {   
-    }
-    
-    /*!
-     * Expand the AABB3D to include the point \p p.
-     * \param p The point to include with the bounding box.
-     */
-    void include(Point3 p)
-    {
-        min.x = std::min(min.x, p.x);
-        min.y = std::min(min.y, p.y);
-        min.z = std::min(min.z, p.z);
-        max.x = std::max(max.x, p.x);
-        max.y = std::max(max.y, p.y);
-        max.z = std::max(max.z, p.z);   
-    }
-    
-    /*!
-     * Offset the coordinates of the bounding box.
-     * \param offset The offset with which to offset the AABB3D.
-     */
-    void offset(Point3 offset)
-    {
-        min += offset;
-        max += offset;
-    }
-    /*!
-     * Offset the coordinates of the bounding box.
-     * \param offset The offset with which to offset the AABB3D.
-     */
-    void offset(Point offset)
-    {
-        min += offset;
-        max += offset;
-    }
-};
-
-}//namespace cura
-#endif//AABB_H
-

src/utils/BucketGrid2D.h

@@ -1,6 +1,6 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
-#ifndef UTILS_BUCKET_GRID_2D_H
-#define UTILS_BUCKET_GRID_2D_H
+/** Copyright (C) 2015 Tim Kuipers- Released under terms of the AGPLv3 License */
+#ifndef BUCKET_GRID_2D_H
+#define BUCKET_GRID_2D_H
 
 #include "logoutput.h"
 #include "intpoint.h"
@@ -46,6 +46,7 @@ private:
         inline uint32_t pointHash_simple(const Point& p) const
         {
             return p.X ^ (p.Y << 8);
+            //return (p.X / 20000) ^ (p.Y / 20000) << 8;
         }
 
         /*!
@@ -199,9 +200,8 @@ public:
      */
     void insert(Point& p, T& t)
     {
-//         typedef typename Map::iterator iter;
-//         std::pair<iter, bool> emplaced = 
-        point2object.emplace(p, t);
+        typedef typename Map::iterator iter;
+        std::pair<iter, bool> emplaced = point2object.emplace(p, t);
 //         if (! emplaced.second)
 //             logError("Error! BucketGrid2D couldn't insert object!");
     };
@@ -212,5 +212,5 @@ public:
 
 };
 
-}//namespace cura
+} // namespace cura
 #endif//BUCKET_GRID_2D_H

src/utils/NoCopy.h

@@ -1,27 +0,0 @@
-#ifndef UTILS_NO_COPY_H
-#define UTILS_NO_COPY_H
-
-/*!
- * Util class to base other objects off which should never be copied.
- * Is needed because C++ has an implicit copy constructor and assign operator when none are defined.
-*/
-class NoCopy
-{
-protected:
-    NoCopy() {}
-
-private:
-    /*!
-     * Private copy constructor.
-     * Cannot be called because it is private.
-     */
-    NoCopy(const NoCopy&);
-
-    /*!
-     * Private assign operator.
-     * Cannot be called because it is private.
-     */
-    NoCopy& operator =(const NoCopy&);
-};
-
-#endif // UTILS_NO_COPY_H

src/utils/SVG.h

@@ -1,279 +0,0 @@
-#ifndef SVG_H
-#define SVG_H
-
-#include <stdio.h> // for file output
-
-#include "polygon.h"
-#include "intpoint.h"
-#include "AABB.h"
-#include "logoutput.h"
-
-namespace cura {
-
-class SVG 
-{
-public:
-    enum class Color {
-        BLACK,
-        WHITE,
-        GRAY,
-        RED,
-        BLUE,
-        GREEN,
-        YELLOW
-    };
-    
-private:
-    
-    std::string toString(Color color)
-    {
-        switch (color)
-        {
-            case SVG::Color::BLACK: return "black";
-            case SVG::Color::WHITE: return "white";
-            case SVG::Color::GRAY: return "gray";
-            case SVG::Color::RED: return "red";
-            case SVG::Color::BLUE: return "blue";
-            case SVG::Color::GREEN: return "green";
-            case SVG::Color::YELLOW: return "yellow";
-            default: return "black";
-        }
-    }
-    
-    
-    
-    FILE* out; // the output file
-    const AABB aabb; // the boundary box to display
-    const Point aabb_size;
-    const double scale;
-
-public:
-    SVG(const char* filename, AABB aabb, Point canvas_size = Point(1024 * 4, 1024 * 4))
-    : aabb(aabb)
-    , aabb_size(aabb.max - aabb.min)
-    , scale(std::min(double(canvas_size.X - 20) / aabb_size.X, double(canvas_size.Y - 20) / aabb_size.Y))
-    {
-        out = fopen(filename, "w");
-        if(!out)
-        {
-            logError("The file %s could not be opened for writing.",filename);
-        }
-        fprintf(out, "<!DOCTYPE html><html><body>\n");
-        fprintf(out, "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width:%llipx;height:%llipx\">\n", canvas_size.X, canvas_size.Y);
-        
-//         fprintf(out, "<marker id='MidMarker' viewBox='0 0 10 10' refX='5' refY='5' markerUnits='strokeWidth' markerWidth='10' markerHeight='10' stroke='lightblue' stroke-width='2' fill='none' orient='auto'>");
-//         fprintf(out, "<path d='M 0 0 L 10 5 M 0 10 L 10 5'/>");
-//         fprintf(out, "</marker>");
-    }
-
-    ~SVG()
-    {
-        fprintf(out, "</svg>\n");
-        fprintf(out, "</body></html>");
-        fclose(out);
-    }
-    
-    /*!
-     * transform a point in real space to canvas space
-     */
-    Point transform(const Point& p) 
-    {
-        return Point((p.X-aabb.min.X)*scale, (p.Y-aabb.min.Y)*scale) + Point(10,10);
-    }
-
-private:
-    
-//     void _writeLines(PolygonRef polygon, Color color = Color::GRAY)
-//     {
-//         for(unsigned int n=0; n<polygon.size(); n++)
-//         {
-//             if (n == 0)
-//                 fprintf(out, "M");
-//             else
-//                 fprintf(out, "L");
-//             Point pf = transform(polygon[n]);
-//             fprintf(out, "%lli,%lli ", pf.X, pf.Y);
-//         }
-//         fprintf(out, "Z\n");
-//     }
-
-public:
-//     void writeLines(Polygons& polygons, Color color = Color::GRAY, Color outline_color = Color::BLACK)
-//     {
-//         fprintf(out, "<g fill-rule='evenodd' style=\"fill: %s; stroke:%s;stroke-width:1\">\n", toString(color).c_str(), toString(outline_color).c_str());
-//         fprintf(out, "<path marker-mid='url(#MidMarker)' d=\"");
-//         for(PolygonRef poly : polygons)
-//         {
-//             _writeLines(poly, outline_color);
-//         }
-//         fprintf(out, "\"/>");
-//         fprintf(out, "</g>\n");
-//     }
-//     void writeLines(PolygonRef poly, Color color = Color::GRAY, Color outline_color = Color::BLACK)
-//     {
-//         fprintf(out, "<g fill-rule='evenodd' style=\"fill: %s; stroke:%s;stroke-width:1\">\n", toString(color).c_str(), toString(outline_color).c_str());
-//         fprintf(out, "<path marker-mid='url(#MidMarker)' d=\"");
-//         writeLines(poly, outline_color);
-//         fprintf(out, "\"/>");
-//         fprintf(out, "</g>\n");
-//     }
-    
-    void writeAreas(Polygons& polygons, Color color = Color::GRAY, Color outline_color = Color::BLACK) 
-    {
-            
-        for(PolygonsPart& parts : polygons.splitIntoParts())
-        {
-            for(unsigned int j=0;j<parts.size();j++)
-            {
-                Polygon poly = parts[j];
-                fprintf(out, "<polygon points=\"");
-                for(Point& p : poly)
-                {
-                    Point fp = transform(p);
-                    fprintf(out, "%lli,%lli ", fp.X, fp.Y);
-                }
-                if (j == 0)
-                    fprintf(out, "\" style=\"fill:%s;stroke:%s;stroke-width:1\" />\n", toString(color).c_str(), toString(outline_color).c_str());
-                else
-                    fprintf(out, "\" style=\"fill:white;stroke:%s;stroke-width:1\" />\n", toString(outline_color).c_str());
-            }
-        }
-    }
-    
-    void writeAreas(std::vector<Point> polygon,Color color = Color::GRAY,Color outline_color = Color::BLACK)
-    {
-        fprintf(out,"<polygon fill=\"%s\" stroke=\"%s\" stroke-width=\"1\" points=\"",toString(color).c_str(),toString(outline_color).c_str()); //The beginning of the polygon tag.
-        for(Point& point : polygon) //Add every point to the list of points.
-        {
-            Point transformed = transform(point);
-            fprintf(out,"%lli,%lli ",transformed.X,transformed.Y);
-        }
-        fprintf(out,"\" />\n"); //The end of the polygon tag.
-    }
-    
-    void writePoint(const Point& p, bool write_coords=false, int size = 5, Color color = Color::BLACK)
-    {
-        Point pf = transform(p);
-        fprintf(out, "<circle cx=\"%lli\" cy=\"%lli\" r=\"%d\" stroke=\"%s\" stroke-width=\"1\" fill=\"%s\" />\n",pf.X, pf.Y, size, toString(color).c_str(), toString(color).c_str());
-        
-        if (write_coords)
-        {
-            fprintf(out, "<text x=\"%lli\" y=\"%lli\" style=\"font-size: 10;\" fill=\"black\">%lli,%lli</text>\n",pf.X, pf.Y, p.X, p.Y);
-        }
-    }
-    void writePoints(PolygonRef poly, bool write_coords=false, int size = 5, Color color = Color::BLACK)
-    {
-        for (Point& p : poly)
-        {
-            writePoint(p, write_coords, size, color);
-        }
-    }
-    
-    void writePoints(Polygons& polygons, bool write_coords=false, int size = 5, Color color = Color::BLACK)
-    {
-        for (PolygonRef poly : polygons)
-        {
-            writePoints(poly, write_coords, size, color);
-        }
-    }
-    
-    /*!
-     * \brief Draws a polyline on the canvas.
-     * 
-     * The polyline is the set of line segments between each pair of consecutive
-     * points in the specified vector.
-     * 
-     * \param polyline A set of points between which line segments must be
-     * drawn.
-     * \param color The colour of the line segments. If this is not specified,
-     * black will be used.
-     */
-    void writeLines(std::vector<Point> polyline,Color color = Color::BLACK)
-    {
-        if(polyline.size() <= 1) //Need at least 2 points.
-        {
-            return;
-        }
-        
-        Point transformed = transform(polyline[0]); //Element 0 must exist due to the check above.
-        fprintf(out,"<path fill=\"none\" stroke=\"%s\" stroke-width=\"1\" d=\"M%lli,%lli",toString(color).c_str(),transformed.X,transformed.Y); //Write the start of the path tag and the first endpoint.
-        for(size_t point = 1;point < polyline.size();point++)
-        {
-            transformed = transform(polyline[point]);
-            fprintf(out,"L%lli,%lli",transformed.X,transformed.Y); //Write a line segment to the next point.
-        }
-        fprintf(out,"\" />\n"); //Write the end of the tag.
-    }
-    
-    void writeLine(const Point& a, const Point& b, Color color = Color::BLACK)
-    {
-        Point fa = transform(a);
-        Point fb = transform(b);
-        fprintf(out, "<line x1=\"%lli\" y1=\"%lli\" x2=\"%lli\" y2=\"%lli\" style=\"stroke:%s;stroke-width:1\" />\n", fa.X, fa.Y, fb.X, fb.Y, toString(color).c_str());
-    }
-    
-    /*!
-     * \brief Draws a dashed line on the canvas from point A to point B.
-     * 
-     * This is useful in the case where multiple lines may overlap each other.
-     * 
-     * \param a The starting endpoint of the line.
-     * \param b The ending endpoint of the line.
-     * \param color The stroke colour of the line.
-     */
-    void writeDashedLine(const Point& a,const Point& b,Color color = Color::BLACK)
-    {
-        Point fa = transform(a);
-        Point fb = transform(b);
-        fprintf(out,"<line x1=\"%lli\" y1=\"%lli\" x2=\"%lli\" y2=\"%lli\" stroke=\"%s\" stroke-width=\"1\" stroke-dasharray=\"5,5\" />\n",fa.X,fa.Y,fb.X,fb.Y,toString(color).c_str());
-    }
-
-    template<typename... Args>
-    void printf(const char* txt, Args&&... args)
-    {
-        fprintf(out, txt, args...);
-    }
-    
-    
-    
-    
-    /*
-    void Polygons::debugOutputHTML(const char* filename, bool dotTheVertices)
-{
-    FILE* out = fopen(filename, "w");
-    fprintf(out, "<!DOCTYPE html><html><body>");
-    Point modelSize = max() - min();
-    modelSize.X = std::max(modelSize.X, modelSize.Y);
-    modelSize.Y = std::max(modelSize.X, modelSize.Y);
-    Point modelMin = min();
-
-    fprintf(out, "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width: 500px; height:500px\">\n");
-    for(PolygonsPart& parts : splitIntoParts())
-    {
-        for(unsigned int j=0;j<parts.size();j++)
-        {
-            Polygon poly = parts[j];
-            fprintf(out, "<polygon points=\"");
-            for(Point& p : poly)
-            {
-                fprintf(out, "%f,%f ", float(p.X - modelMin.X)/modelSize.X*500, float(p.Y - modelMin.Y)/modelSize.Y*500);
-            }
-            if (j == 0)
-                fprintf(out, "\" style=\"fill:gray; stroke:black;stroke-width:1\" />\n");
-            else
-                fprintf(out, "\" style=\"fill:red; stroke:black;stroke-width:1\" />\n");
-            
-            if (dotTheVertices)
-                for(Point& p : poly)
-                    fprintf(out, "<circle cx=\"%f\" cy=\"%f\" r=\"2\" stroke=\"black\" stroke-width=\"3\" fill=\"black\" />", float(p.X - modelMin.X)/modelSize.X*500, float(p.Y - modelMin.Y)/modelSize.Y*500);
-        }
-    }
-    fprintf(out, "</svg>\n");
-    fprintf(out, "</body></html>");
-    fclose(out);
-    } */   
-
-};
-
-} // namespace cura
-#endif // SVG_H

src/utils/floatpoint.h

@@ -2,25 +2,22 @@
 #ifndef FLOAT_POINT_H
 #define FLOAT_POINT_H
 
+/*
+Floating point 3D points are used during model loading as 3D vectors.
+They represent millimeters in 3D space.
+*/
+
 #include "intpoint.h"
 
 #include <stdint.h>
 #include <math.h>
 
-
-namespace cura
-{
-    
-/*
-Floating point 3D points are used during model loading as 3D vectors.
-They represent millimeters in 3D space.
-*/
 class FPoint3
 {
 public:
     float x,y,z;
     FPoint3() {}
-    FPoint3(float _x, float _y, float _z): x(_x), y(_y), z(_z) {}
+    FPoint3(float _x, float _y, float _z): x(_x), y(_y), z(_z) {}
     FPoint3(const Point3& p): x(p.x*.001), y(p.y*.001), z(p.z*.001) {}
 
     FPoint3 operator+(const FPoint3& p) const { return FPoint3(x+p.x, y+p.y, z+p.z); }
@@ -28,9 +25,9 @@ public:
     FPoint3 operator*(const float f) const { return FPoint3(x*f, y*f, z*f); }
     FPoint3 operator/(const float f) const { return FPoint3(x/f, y/f, z/f); }
 
-    FPoint3& operator += (const FPoint3& p) { x += p.x; y += p.y; z += p.z; return *this; }
+    FPoint3& operator += (const FPoint3& p) { x += p.x; y += p.y; z += p.z; return *this; }
     FPoint3& operator -= (const FPoint3& p) { x -= p.x; y -= p.y; z -= p.z; return *this; }
-    FPoint3& operator *= (const float f) { x *= f; y *= f; z *= f; return *this; }
+    FPoint3& operator *= (const float f) { x *= f; y *= f; z *= f; return *this; }
 
     bool operator==(FPoint3& p) const { return x==p.x&&y==p.y&&z==p.z; }
     bool operator!=(FPoint3& p) const { return x!=p.x||y!=p.y||z!=p.z; }
@@ -55,48 +52,48 @@ public:
     float vSize()
     {
         return sqrt(vSize2());
-    }
-
-    inline FPoint3 normalized()
-    {
-        return (*this)/vSize();
-    }
-
-    FPoint3 cross(const FPoint3& p)
-    {
-        return FPoint3(
-            y*p.z-z*p.y,
-            z*p.x-x*p.z,
-            x*p.y-y*p.x);
-    }
-
-    static FPoint3 cross(const Point3& a, const Point3& b)
-    {
-        return FPoint3(a).cross(FPoint3(b));
-//        FPoint3(
-//            a.y*b.z-a.z*b.y,
-//            a.z*b.x-a.x*b.z,
-//            a.x*b.y-a.y*b.x);
-    }
-
-    Point3 toPoint3()
-    {
-        return Point3(x*1000, y*1000, z*1000);
+    }
+
+    inline FPoint3 normalized()
+    {
+        return (*this)/vSize();
+    }
+
+    FPoint3 cross(const FPoint3& p)
+    {
+        return FPoint3(
+            y*p.z-z*p.y,
+            z*p.x-x*p.z,
+            x*p.y-y*p.x);
+    }
+
+    static FPoint3 cross(const Point3& a, const Point3& b)
+    {
+        return FPoint3(a).cross(FPoint3(b));
+//        FPoint3(
+//            a.y*b.z-a.z*b.y,
+//            a.z*b.x-a.x*b.z,
+//            a.x*b.y-a.y*b.x);
+    }
+
+    Point3 toPoint3()
+    {
+        return Point3(x*1000, y*1000, z*1000);
     }
 };
-
-
-//inline FPoint3 operator+(FPoint3 lhs, const FPoint3& rhs) {
-//  lhs += rhs;
-//  return lhs;
-//}
-inline float operator*(FPoint3 lhs, const FPoint3& rhs) {
-    return lhs.x*rhs.x + lhs.y*rhs.y + lhs.z*rhs.z;
-}
-//inline FPoint3 operator*(FPoint3 lhs, const float f) {
-//  lhs *= f;
-//  return lhs;
-//}
+
+
+//inline FPoint3 operator+(FPoint3 lhs, const FPoint3& rhs) {
+//  lhs += rhs;
+//  return lhs;
+//}
+inline float operator*(FPoint3 lhs, const FPoint3& rhs) {
+    return lhs.x*rhs.x + lhs.y*rhs.y + lhs.z*rhs.z;
+}
+//inline FPoint3 operator*(FPoint3 lhs, const float f) {
+//  lhs *= f;
+//  return lhs;
+//}
 
 class FMatrix3x3
 {
@@ -125,5 +122,4 @@ public:
     }
 };
 
-}//namespace cura
 #endif//INT_POINT_H

src/utils/gettime.cpp

@@ -1,9 +1,6 @@
 /** Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License */
 #include "gettime.h"
 
-namespace cura
-{
-    
 TimeKeeper::TimeKeeper()
 {
     restart();
@@ -15,5 +12,3 @@ double TimeKeeper::restart()
     startTime = getTime();
     return ret;
 }
-
-}//namespace cura

src/utils/gettime.h

@@ -9,8 +9,6 @@
 #include <stddef.h>
 #endif
 
-namespace cura
-{
 static inline double getTime()
 {
 #ifdef __WIN32
@@ -32,5 +30,4 @@ public:
     double restart();
 };
 
-}//namespace cura
 #endif//GETTIME_H

src/utils/intpoint.h

@@ -15,15 +15,10 @@ Integer points are used to avoid floating point rounding errors, and because Cli
 #include <stdint.h>
 #include <cmath>
 
-#include <functional> // for hash function obkject
-
 #include <iostream> // auto-serialization / auto-toString()
 
 #define INT2MM(n) (double(n) / 1000.0)
-#define INT2MM2(n) (double(n) / 1000000.0)
 #define MM2INT(n) (int64_t((n) * 1000))
-#define MM2_2INT(n) (int64_t((n) * 1000000))
-#define MM3_2INT(n) (int64_t((n) * 1000000000))
 
 #define INT2MICRON(n) ((n) / 1)
 #define MICRON2INT(n) ((n) * 1)
@@ -42,10 +37,6 @@ Integer points are used to avoid floating point rounding errors, and because Cli
 #define DEPRECATED(func) func
 #endif
 
-
-namespace cura
-{
-
 class Point3
 {
 public:
@@ -126,8 +117,6 @@ public:
 
 };
 
-static Point3 no_point3(std::numeric_limits<int32_t>::infinity(), std::numeric_limits<int32_t>::infinity(), std::numeric_limits<int32_t>::infinity());
-    
 inline Point3 operator*(const int32_t i, const Point3& rhs) {
     return rhs * i;
 }
@@ -147,8 +136,6 @@ public:
 #define POINT_MIN std::numeric_limits<ClipperLib::cInt>::min()
 #define POINT_MAX std::numeric_limits<ClipperLib::cInt>::max()
 
-static Point no_point(std::numeric_limits<int32_t>::infinity(), std::numeric_limits<int32_t>::infinity());
-
 /* Extra operators to make it easier to do math with the 64bit Point objects */
 INLINE Point operator-(const Point& p0) { return Point(-p0.X, -p0.Y); }
 INLINE Point operator+(const Point& p0, const Point& p1) { return Point(p0.X+p1.X, p0.Y+p1.Y); }
@@ -156,7 +143,6 @@ INLINE Point operator-(const Point& p0, const Point& p1) { return Point(p0.X-p1.
 INLINE Point operator*(const Point& p0, const int32_t i) { return Point(p0.X*i, p0.Y*i); }
 INLINE Point operator*(const int32_t i, const Point& p0) { return p0 * i; }
 INLINE Point operator/(const Point& p0, const int32_t i) { return Point(p0.X/i, p0.Y/i); }
-INLINE Point operator/(const Point& p0, const Point& p1) { return Point(p0.X/p1.X, p0.Y/p1.Y); }
 
 INLINE Point& operator += (Point& p0, const Point& p1) { p0.X += p1.X; p0.Y += p1.Y; return p0; }
 INLINE Point& operator -= (Point& p0, const Point& p1) { p0.X -= p1.X; p0.Y -= p1.Y; return p0; }
@@ -218,25 +204,6 @@ INLINE int angle(const Point& p)
     return angle;
 }
 
-}//namespace cura
-    
-namespace std {
-template <>
-struct hash<cura::Point> {
-    size_t operator()(const cura::Point & pp) const
-    {
-        static int prime = 31;
-        int result = 89;
-        result = result * prime + pp.X;
-        result = result * prime + pp.Y;
-        return result; 
-    }
-};
-}
-
-namespace cura
-{
-
 class PointMatrix
 {
 public:
@@ -285,11 +252,6 @@ public:
 inline Point3 operator+(const Point3& p3, const Point& p2) {
     return Point3(p3.x + p2.X, p3.y + p2.Y, p3.z);
 }
-inline Point3& operator+=(Point3& p3, const Point& p2) {
-    p3.x += p2.X;
-    p3.y += p2.Y;
-    return p3;
-}
 
 inline Point operator+(const Point& p2, const Point3& p3) {
     return Point(p3.x + p2.X, p3.y + p2.Y);
@@ -299,16 +261,9 @@ inline Point operator+(const Point& p2, const Point3& p3) {
 inline Point3 operator-(const Point3& p3, const Point& p2) {
     return Point3(p3.x - p2.X, p3.y - p2.Y, p3.z);
 }
-inline Point3& operator-=(Point3& p3, const Point& p2) {
-    p3.x -= p2.X;
-    p3.y -= p2.Y;
-    return p3;
-}
 
 inline Point operator-(const Point& p2, const Point3& p3) {
     return Point(p2.X - p3.x, p2.Y - p3.y);
 }
 
-}//namespace cura
 #endif//INT_POINT_H
-

src/utils/linearAlg2D.h

@@ -1,180 +0,0 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
-#ifndef UTILS_LINEAR_ALG_2D_H
-#define UTILS_LINEAR_ALG_2D_H
-
-#include "intpoint.h"
-
-namespace cura
-{
-class LinearAlg2D
-{
-public:
-    static short pointLiesOnTheRightOfLine(Point p, Point p0, Point p1)
-    {
-        // no tests unless the segment p0-p1 is at least partly at, or to right of, p.X
-        if ( std::max(p0.X, p1.X) >= p.X )
-        {
-            int64_t pdY = p1.Y-p0.Y;
-            if (pdY < 0) // p0->p1 is 'falling'
-            {
-                if ( p1.Y <= p.Y && p0.Y > p.Y ) // candidate
-                {
-                    // dx > 0 if intersection is to right of p.X
-                    int64_t dx = (p1.X - p0.X) * (p1.Y - p.Y) - (p1.X-p.X)*pdY;
-                    if (dx == 0) // includes p == p1
-                    {
-                        return 0;
-                    }
-                    if (dx > 0)
-                    {
-                        return 1;
-                    }
-                }
-            }
-            else if (p.Y >= p0.Y)
-            {
-                if (p.Y < p1.Y) // candidate for p0->p1 'rising' and includes p.Y
-                {
-                    // dx > 0 if intersection is to right of p.X
-                    int64_t dx = (p1.X - p0.X) * (p.Y - p0.Y) - (p.X-p0.X)*pdY;
-                    if (dx == 0) // includes p == p0
-                    {
-                        return 0;
-                    }
-                    if (dx > 0)
-                    {
-                        return 1;
-                    }
-                }
-                else if (p.Y == p1.Y)
-                {
-                    // some special cases here, points on border:
-                    // - p1 exactly matches p (might otherwise be missed)
-                    // - p0->p1 exactly horizontal, and includes p.
-                    // (we already tested std::max(p0.X,p1.X) >= p.X )
-                    if (p.X == p1.X ||
-                        (pdY==0 && std::min(p0.X,p1.X) <= p.X) )
-                    {
-                        return 0;
-                    }
-                }
-            }
-        }
-        return -1;
-                
-    }
-    
-    
-    /*!
-    * Find the point closest to \p from on the line from \p p0 to \p p1
-    */
-    static Point getClosestOnLineSegment(Point from, Point p0, Point p1)
-    {
-        Point direction = p1 - p0;
-        Point toFrom = from-p0;
-        int64_t projected_x = dot(toFrom, direction) ;
-
-        int64_t x_p0 = 0;
-        int64_t x_p1 = vSize2(direction);
-
-        if (x_p1 == 0)
-        {
-    //         std::cout << "warning! too small segment" << std::endl;
-            return p0;
-        }
-        if (projected_x <= x_p0)
-        {
-            return p0;
-        }
-        if (projected_x >= x_p1)
-        {
-            return p1;
-        }
-        else
-        {
-            Point ret = p0 + projected_x / vSize(direction) * direction  / vSize(direction);
-            return ret ;
-        }
-
-    }
-
-
-
-    /*!
-    * Get the squared distance from point \p b to a line *segment* from \p a to \p c.
-    * 
-    * In case \p b is on \p a or \p c, \p b_is_beyond_ac should become 0.
-    * 
-    * \param a the first point of the line segment
-    * \param b the point to measure the distance from
-    * \param c the second point on the line segment
-    * \param b_is_beyond_ac optional output parameter: whether \p b is closest to the line segment (0), to \p a (-1) or \p b (1)
-    */
-    static int64_t getDist2FromLineSegment(const Point& a, const Point& b, const Point& c, char* b_is_beyond_ac = nullptr)
-    {
-    /* 
-    *     a,
-    *     /|
-    *    / |
-    * b,/__|, x
-    *   \  |
-    *    \ |
-    *     \|
-    *      'c
-    * 
-    * x = b projected on ac
-    * ax = ab dot ac / vSize(ac)
-    * xb = ab - ax
-    * error = vSize(xb)
-    */
-        Point ac = c - a;
-        int64_t ac_size = vSize(ac);
-
-        Point ab = b - a;
-        if (ac_size == 0) 
-        {
-            int64_t ab_dist2 = vSize2(ab); 
-            if (ab_dist2 == 0)
-            {
-                *b_is_beyond_ac = 0; // a is on b is on c
-            }
-            // otherwise variable b_is_beyond_ac remains its value; it doesn't make sense to choose between -1 and 1
-            return ab_dist2;
-        }
-        int64_t projected_x = dot(ab, ac);
-        int64_t ax_size = projected_x / ac_size;
-        
-        if (ax_size < 0) 
-        {// b is 'before' segment ac 
-            if (b_is_beyond_ac)
-            {
-                *b_is_beyond_ac = -1;
-            }
-            return vSize2(ab);
-        }
-        if (ax_size > ac_size)
-        {// b is 'after' segment ac
-            if (b_is_beyond_ac)
-            {
-                *b_is_beyond_ac = 1;
-            }
-            return vSize2(b - c);
-        }
-        
-        if (b_is_beyond_ac)
-        {
-            *b_is_beyond_ac = 0;
-        }
-        Point ax = ac * ax_size / ac_size;
-        Point bx = ab - ax;
-        return vSize2(bx);
-//         return vSize2(ab) - ax_size*ax_size; // less accurate
-    }
-
-
-};
-
-
-
-}//namespace cura
-#endif//UTILS_LINEAR_ALG_2D_H

src/utils/logoutput.cpp

@@ -26,17 +26,8 @@ void logError(const char* fmt, ...)
     vfprintf(stderr, fmt, args);
     va_end(args);
     fflush(stderr);
-}
-
-void logWarning(const char* fmt, ...)
-{
-    va_list args;
-    va_start(args, fmt);
-    vfprintf(stderr, fmt, args);
-    va_end(args);
-    fflush(stderr);
-}
-
+}
+
 void logCopyright(const char* fmt, ...)
 {
     va_list args;
@@ -57,12 +48,12 @@ void log(const char* fmt, ...)
     va_end(args);
     fflush(stderr);
 }
-void logProgress(const char* type, int value, int maxValue, float percent)
+void logProgress(const char* type, int value, int maxValue)
 {
     if (!progressLogging)
         return;
 
-    fprintf(stderr, "Progress:%s:%i:%i \t%f%%\n", type, value, maxValue, percent);
+    fprintf(stderr, "Progress:%s:%i:%i\n", type, value, maxValue);
     fflush(stderr);
 }
 

src/utils/logoutput.h

@@ -9,15 +9,13 @@ void enableProgressLogging();
 
 //Report an error message (always reported, independed of verbose level)
 void logError(const char* fmt, ...);
-//Report a warning message (always reported, independed of verbose level)
-void logWarning(const char* fmt, ...);
 //Report a message if the verbose level is 1 or higher. (defined as _log to prevent clash with log() function from <math.h>)
 void log(const char* fmt, ...);
 //Report an copyright message (always reported, independed of verbose level)
-void logCopyright(const char* fmt, ...);
+void logCopyright(const char* fmt, ...);
 
 //Report engine progress to interface if any. Only if "enableProgressLogging()" has been called.
-void logProgress(const char* type, int value, int maxValue, float percent);
+void logProgress(const char* type, int value, int maxValue);
 
 }//namespace cura
 

src/utils/polygon.cpp

@@ -1,333 +0,0 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
-#include "polygon.h"
-
-#include "linearAlg2D.h" // pointLiesOnTheRightOfLine
-
-#include "../debug.h"
-
-namespace cura 
-{
-    
-bool PolygonRef::inside(Point p, bool border_result)
-{
-    PolygonRef thiss = *this;
-    if (size() < 1)
-    {
-        return false;
-    }
-    
-    int crossings = 0;
-    Point p0 = back();
-    for(unsigned int n=0; n<size(); n++)
-    {
-        Point p1 = thiss[n];
-        // no tests unless the segment p0-p1 is at least partly at, or to right of, p.X
-        short comp = LinearAlg2D::pointLiesOnTheRightOfLine(p, p0, p1);
-        if (comp == 1)
-        {
-            crossings++;
-        }
-        else if (comp == 0)
-        {
-            return border_result;
-        }
-        p0 = p1;
-    }
-    return (crossings % 2) == 1;
-}
-
-bool Polygons::inside(Point p, bool border_result)
-{
-    Polygons& thiss = *this;
-    if (size() < 1)
-    {
-        return false;
-    }
-    
-    int crossings = 0;
-    for (PolygonRef poly : thiss)
-    {
-        Point p0 = poly.back();
-        for(Point& p1 : poly)
-        {
-            short comp = LinearAlg2D::pointLiesOnTheRightOfLine(p, p0, p1);
-            if (comp == 1)
-            {
-                crossings++;
-            }
-            else if (comp == 0)
-            {
-                return border_result;
-            }
-            p0 = p1;
-        }
-    }
-    return (crossings % 2) == 1;
-}
-
-unsigned int Polygons::findInside(Point p, bool border_result)
-{
-    Polygons& thiss = *this;
-    if (size() < 1)
-    {
-        return false;
-    }
-    
-    int64_t min_x[size()];
-    std::fill_n(min_x, size(), std::numeric_limits<int64_t>::max());  // initialize with int.max
-    int crossings[size()];
-    std::fill_n(crossings, size(), 0);  // initialize with zeros
-    
-    for (unsigned int poly_idx = 0; poly_idx < size(); poly_idx++)
-    {
-        PolygonRef poly = thiss[poly_idx];
-        Point p0 = poly.back();
-        for(Point& p1 : poly)
-        {
-            short comp = LinearAlg2D::pointLiesOnTheRightOfLine(p, p0, p1);
-            if (comp == 1)
-            {
-                crossings[poly_idx]++;
-                int64_t x;
-                if (p1.Y == p0.Y)
-                {
-                    x = p0.X;
-                }
-                else 
-                {
-                    x = p0.X + (p1.X-p0.X) * (p.Y-p0.Y) / (p1.Y-p0.Y);
-                }
-                if (x < min_x[poly_idx])
-                {
-                    min_x[poly_idx] = x;
-                }
-            }
-            else if (border_result && comp == 0)
-            {
-                return poly_idx;
-            }
-            p0 = p1;
-        }
-    }
-    
-    int64_t min_x_uneven = std::numeric_limits<int64_t>::max();
-    unsigned int ret = NO_INDEX;
-    unsigned int n_unevens = 0;
-    for (unsigned int array_idx = 0; array_idx < size(); array_idx++)
-    {
-        if (crossings[array_idx] % 2 == 1)
-        {
-            n_unevens++;
-            if (min_x[array_idx] < min_x_uneven)
-            {
-                min_x_uneven = min_x[array_idx];
-                ret = array_idx;
-            }
-        }
-    }
-    if (n_unevens % 2 == 0) { ret = NO_INDEX; }
-    return ret;
-}
-
-void PolygonRef::simplify(int smallest_line_segment_squared, int allowed_error_distance_squared){
-    PolygonRef& thiss = *this;
-    
-    if (size() <= 2)
-    {
-        clear();
-        return; 
-    }
-    
-    { // remove segments smaller than allowed_error_distance
-    // this is neccesary in order to avoid the case where a long segment is followed by a lot of small segments would get simplified to a long segment going to the wrong end point
-    //  .......                _                 _______
-    // |                      /                 |
-    // |     would become    /    instead of    |
-    // |                    /                   |
-        Point* last = &thiss.back();
-        unsigned int writing_idx = 0;
-        for (unsigned int poly_idx = 0; poly_idx < size(); poly_idx++)
-        {
-            Point& here = thiss[poly_idx];
-            if (vSize2(*last - here) < smallest_line_segment_squared)
-            {
-                // don't add the point
-            }
-            else 
-            {
-                thiss[writing_idx] = here;
-                writing_idx++;
-                last = &here;
-            }
-        }
-        polygon->erase(polygon->begin() + writing_idx , polygon->end());
-    }
-    
-    Point* last = &thiss[0];
-    unsigned int writing_idx = 1;
-    for (unsigned int poly_idx = 1; poly_idx < size(); poly_idx++)
-    {
-        Point& here = thiss[poly_idx];
-        if ( vSize2(here-*last) < allowed_error_distance_squared )
-        {
-            // don't add the point to the result
-            continue;
-        }
-        Point& next = thiss[(poly_idx+1) % size()];
-        char here_is_beyond_line = 0;
-        int64_t error2 = LinearAlg2D::getDist2FromLineSegment(*last, here, next, &here_is_beyond_line);
-        if (here_is_beyond_line == 0 && error2 < allowed_error_distance_squared)
-        {// don't add the point to the result
-        } else 
-        {
-            thiss[writing_idx] = here;
-            writing_idx++;
-            last = &here;
-        }
-    }
-    polygon->erase(polygon->begin() + writing_idx , polygon->end());
-    
-            
-    if (size() < 3)
-    {
-        clear();
-        return;
-    }
-    
-    { // handle the line segments spanning the vector end and begin
-        Point* last = &thiss.back();
-        Point& here = thiss[0];
-        if ( vSize2(here-*last) < allowed_error_distance_squared )
-        {
-            remove(0);
-        }
-        Point& next = thiss[1];
-        int64_t error2 = LinearAlg2D::getDist2FromLineSegment(*last, here, next);
-        if (error2 < allowed_error_distance_squared)
-        {
-            remove(0);
-        } else 
-        {
-            // leave it in
-        }
-    }
-    
-    if (size() < 3)
-    {
-        clear();
-        return;
-    }
-}
-
-std::vector<PolygonsPart> Polygons::splitIntoParts(bool unionAll) const
-{
-    std::vector<PolygonsPart> ret;
-    ClipperLib::Clipper clipper(clipper_init);
-    ClipperLib::PolyTree resultPolyTree;
-    clipper.AddPaths(polygons, ClipperLib::ptSubject, true);
-    if (unionAll)
-        clipper.Execute(ClipperLib::ctUnion, resultPolyTree, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
-    else
-        clipper.Execute(ClipperLib::ctUnion, resultPolyTree);
-
-    splitIntoParts_processPolyTreeNode(&resultPolyTree, ret);
-    return ret;
-}
-
-void Polygons::splitIntoParts_processPolyTreeNode(ClipperLib::PolyNode* node, std::vector<PolygonsPart>& ret) const
-{
-    for(int n=0; n<node->ChildCount(); n++)
-    {
-        ClipperLib::PolyNode* child = node->Childs[n];
-        PolygonsPart part;
-        part.add(child->Contour);
-        for(int i=0; i<child->ChildCount(); i++)
-        {
-            part.add(child->Childs[i]->Contour);
-            splitIntoParts_processPolyTreeNode(child->Childs[i], ret);
-        }
-        ret.push_back(part);
-    }
-}
-
-unsigned int PartsView::getPartContaining(unsigned int poly_idx, unsigned int* boundary_poly_idx) 
-{
-    PartsView& partsView = *this;
-    for (unsigned int part_idx_now = 0; part_idx_now < partsView.size(); part_idx_now++)
-    {
-        std::vector<unsigned int>& partView = partsView[part_idx_now];
-        if (partView.size() == 0) { continue; }
-        std::vector<unsigned int>::iterator result = std::find(partView.begin(), partView.end(), poly_idx);
-        if (result != partView.end()) 
-        { 
-            if (boundary_poly_idx) { *boundary_poly_idx = partView[0]; }
-            return part_idx_now;
-        }
-    }
-    return NO_INDEX;
-}
-
-PolygonsPart PartsView::assemblePart(unsigned int part_idx) 
-{
-    PartsView& partsView = *this;
-    PolygonsPart ret;
-    if (part_idx != NO_INDEX)
-    {
-        for (unsigned int poly_idx_ff : partsView[part_idx])
-        {
-            ret.add(polygons[poly_idx_ff]);
-        }
-    }
-    return ret;
-}
-
-PolygonsPart PartsView::assemblePartContaining(unsigned int poly_idx, unsigned int* boundary_poly_idx) 
-{
-    PolygonsPart ret;
-    unsigned int part_idx = getPartContaining(poly_idx, boundary_poly_idx);
-    if (part_idx != NO_INDEX)
-    {
-        return assemblePart(part_idx);
-    }
-    return ret;
-}
-
-PartsView Polygons::splitIntoPartsView(bool unionAll)
-{
-    Polygons reordered;
-    PartsView partsView(*this);
-    ClipperLib::Clipper clipper(clipper_init);
-    ClipperLib::PolyTree resultPolyTree;
-    clipper.AddPaths(polygons, ClipperLib::ptSubject, true);
-    if (unionAll)
-        clipper.Execute(ClipperLib::ctUnion, resultPolyTree, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
-    else
-        clipper.Execute(ClipperLib::ctUnion, resultPolyTree);
-
-    splitIntoPartsView_processPolyTreeNode(partsView, reordered, &resultPolyTree);
-    
-    (*this) = reordered;
-    return partsView;
-}
-
-void Polygons::splitIntoPartsView_processPolyTreeNode(PartsView& partsView, Polygons& reordered, ClipperLib::PolyNode* node)
-{
-    for(int n=0; n<node->ChildCount(); n++)
-    {
-        ClipperLib::PolyNode* child = node->Childs[n];
-        partsView.emplace_back();
-        unsigned int pos = partsView.size() - 1;
-        partsView[pos].push_back(reordered.size());
-        reordered.add(child->Contour);
-        for(int i = 0; i < child->ChildCount(); i++)
-        {
-            partsView[pos].push_back(reordered.size());
-            reordered.add(child->Childs[i]->Contour);
-            splitIntoPartsView_processPolyTreeNode(partsView, reordered, child->Childs[i]);
-        }
-    }
-}
-
-
-
-}//namespace cura

src/utils/polygon.h

@@ -6,9 +6,8 @@
 #include <float.h>
 #include <clipper/clipper.hpp>
 
-#include <algorithm>    // std::reverse, fill_n array
+#include <algorithm>    // std::reverse
 #include <cmath> // fabs
-#include <limits> // int64_t.min
 
 #include "intpoint.h"
 
@@ -30,14 +29,9 @@ enum PolygonType
     SupportType,
     SkirtType,
     InfillType,
-    SupportInfillType,
-    MoveCombingType,
-    MoveRetractionType
+    SupportInfillType
 };
 
-
-class PartsView;
-
 const static int clipper_init = (0);
 #define NO_INDEX (std::numeric_limits<unsigned int>::max())
 
@@ -51,11 +45,6 @@ public:
     PolygonRef(ClipperLib::Path& polygon)
     : polygon(&polygon)
     {}
-    
-    PolygonRef(const PolygonRef& other)
-    { 
-        polygon = other.polygon;
-    }
 
     unsigned int size() const
     {
@@ -78,12 +67,8 @@ public:
         polygon->push_back(p);
     }
     
-    PolygonRef& operator=(const PolygonRef& other) { polygon = other.polygon; return *this; }
-    
-    ClipperLib::Path& operator*() { return *polygon; }
-    
     template <typename... Args>
-    void emplace_back(Args&&... args)
+    void emplace_back(Args... args)
     {
         polygon->emplace_back(args...);
     }
@@ -99,11 +84,6 @@ public:
         polygon->clear();
     }
 
-    /*!
-     * On Y-axis positive upward displays, Orientation will return true if the polygon's orientation is counter-clockwise.
-     * 
-     * from http://www.angusj.com/delphi/clipper/documentation/Docs/Units/ClipperLib/Functions/Orientation.htm
-     */
     bool orientation() const
     {
         return ClipperLib::Orientation(*polygon);
@@ -149,6 +129,7 @@ public:
         return ret;
     }
 
+
     double area() const
     {
         return ClipperLib::Area(*polygon);
@@ -221,15 +202,74 @@ public:
      * \param border_result What to return when the point is exactly on the border
      * \return Whether the point \p p is inside this polygon (or \p border_result when it is on the border)
      */
-    bool inside(Point p, bool border_result = false);
+    bool inside(Point p, bool border_result=false)
+    {
+        PolygonRef thiss = *this;
+        if (size() < 1)
+        {
+            return false;
+        }
+        
+        int crossings = 0;
+        Point p0 = back();
+        for(unsigned int n=0; n<size(); n++)
+        {
+            Point p1 = thiss[n];
+            // no tests unless the segment p0-p1 is at least partly at, or to right of, p.X
+            if ( std::max(p0.X, p1.X) >= p.X )
+            {
+                int64_t pdY = p1.Y-p0.Y;
+                if (pdY < 0) // p0->p1 is 'falling'
+                {
+                    if ( p1.Y <= p.Y && p0.Y > p.Y ) // candidate
+                    {
+                        // dx > 0 if intersection is to right of p.X
+                        int64_t dx = (p1.X - p0.X) * (p1.Y - p.Y) - (p1.X-p.X)*pdY;
+                        if (dx == 0) // includes p == p1
+                        {
+                            return border_result;
+                        }
+                        if (dx > 0)
+                        {
+                            crossings ++;
+                        }
+                    }
+                }
+                else if (p.Y >= p0.Y)
+                {
+                    if (p.Y < p1.Y) // candidate for p0->p1 'rising' and includes p.Y
+                    {
+                        // dx > 0 if intersection is to right of p.X
+                        int64_t dx = (p1.X - p0.X) * (p.Y - p0.Y) - (p.X-p0.X)*pdY;
+                        if (dx == 0) // includes p == p0
+                        {
+                            return border_result;
+                        }
+                        if (dx > 0)
+                        {
+                            crossings ++;
+                        }
+                    }
+                    else if (p.Y == p1.Y)
+                    {
+                        // some special cases here, points on border:
+                        // - p1 exactly matches p (might otherwise be missed)
+                        // - p0->p1 exactly horizontal, and includes p.
+                        // (we already tested std::max(p0.X,p1.X) >= p.X )
+                        if (p.X == p1.X ||
+                            (pdY==0 && std::min(p0.X,p1.X) <= p.X) )
+                        {
+                            return border_result;
+                            // otherwise, count no crossings
+                        }
+                    }
+                }
+            }
+            p0 = p1;
+        }
+        return (crossings % 2) == 1;
+    }
     
-    /*!
-     * Smooth out the polygon and store the result in \p result.
-     * Smoothing is performed by removing line segments smaller than \p remove_length
-     * 
-     * \param remove_length The length of the largest segment removed
-     * \param result (output) The result polygon, assumed to be empty
-     */
     void smooth(int remove_length, PolygonRef result)
     {
         PolygonRef& thiss = *this;
@@ -247,13 +287,68 @@ public:
         }
     }
 
-    /*! 
-     * removes consecutive line segments with same orientation and changes this polygon
-     * 
-     * \param smallest_line_segment_squared maximal squared length of removed line segments
-     * \param allowed_error_distance_squared The square of the distance of the middle point to the line segment of the consecutive and previous point for which the middle point is removed
-     */
-    void simplify(int smallest_line_segment_squared = 100, int allowed_error_distance_squared = 25);
+    void simplify(int allowed_error_distance_squared, PolygonRef result) //!< removes consecutive line segments with same orientation
+    {
+        PolygonRef& thiss = *this;
+        ClipperLib::Path* poly = result.polygon;
+        
+        if (size() < 4)
+        {
+            for (unsigned int poly_idx = 0; poly_idx < size(); poly_idx++)
+                poly->push_back(thiss[poly_idx]);
+            return;
+        }
+        
+        Point& last = thiss[0];
+        result.add(last);
+        for (unsigned int poly_idx = 1; poly_idx < size(); poly_idx++)
+        {
+            /*
+             *    /|
+             * c / | a
+             *  /__|
+             *  \ b|
+             * e \ | d
+             *    \|
+             * 
+             * b^2 = c^2 - a^2
+             * b^2 = e^2 - d^2
+             * 
+             * approximately: (this is asymptotically true for d -> 0)
+             * a/d = c/e
+             * a/(a+d) = c/(c+e)
+             * a^2 / (a+d)^2 = c^2 / (c+e)^2
+             * a^2 = c^2 * (a+d)^2/ (c+e)^2
+             * 
+             */
+            if ( vSize2(thiss[poly_idx]-last) < allowed_error_distance_squared )
+            {
+                continue;
+            }
+            Point& next = thiss[(poly_idx+1) % size()];
+            auto square = [](double in) { return in*in; };
+            int64_t a2 = vSize2(next-thiss[poly_idx]) * vSize2(next-last) /  static_cast<int64_t>(square(vSizeMM(next-last) + vSizeMM(thiss[poly_idx]-last))*1000*1000);
+            
+            int64_t error2 = vSize2(next-thiss[poly_idx]) - a2;
+            if (error2 < allowed_error_distance_squared)
+            {
+                // don't add the point to the result
+            } else 
+            {
+                poly->push_back(thiss[poly_idx]);
+                last = thiss[poly_idx];
+            }
+        }
+        
+        if (result.size() < 3)
+        {
+            poly->clear();
+        
+            for (unsigned int poly_idx = 0; poly_idx < size(); poly_idx++)
+                poly->push_back(thiss[poly_idx]);
+            return;
+        }
+    }
 
     void pop_back()
     { 
@@ -305,11 +400,9 @@ public:
     }
 };
 
-class PolygonsPart;
-
 class Polygons
 {
-protected:
+private:
     ClipperLib::Paths polygons;
 public:
     unsigned int size() const
@@ -359,7 +452,6 @@ public:
     }
 
     Polygons() {}
-
     Polygons(const Polygons& other) { polygons = other.polygons; }
     Polygons& operator=(const Polygons& other) { polygons = other.polygons; return *this; }
     Polygons difference(const Polygons& other) const
@@ -380,13 +472,6 @@ public:
         clipper.Execute(ClipperLib::ctUnion, ret.polygons, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
         return ret;
     }
-    /*!
-     * Union all polygons with each other (When polygons.add(polygon) has been called for overlapping polygons)
-     */
-    Polygons unionPolygons() const
-    {
-        return unionPolygons(Polygons());
-    }
     Polygons intersection(const Polygons& other) const
     {
         Polygons ret;
@@ -416,63 +501,6 @@ public:
         return ret;
     }
     
-    Polygons offsetPolyLine(int distance, ClipperLib::JoinType joinType = ClipperLib::jtMiter) const
-    {
-        Polygons ret;
-        double miterLimit = 1.2;
-        ClipperLib::ClipperOffset clipper(miterLimit, 10.0);
-        clipper.AddPaths(polygons, joinType, ClipperLib::etOpenSquare);
-        clipper.MiterLimit = miterLimit;
-        clipper.Execute(ret.polygons, distance);
-        return ret;
-    }
-    
-    /*!
-     * Check if we are inside the polygon. We do this by tracing from the point towards the positive X direction,
-     * every line we cross increments the crossings counter. If we have an even number of crossings then we are not inside the polygon.
-     * Care needs to be taken, if p.Y exactly matches a vertex to the right of p, then we need to count 1 intersect if the
-     * outline passes vertically past; and 0 (or 2) intersections if that point on the outline is a 'top' or 'bottom' vertex.
-     * The easiest way to do this is to break out two cases for increasing and decreasing Y ( from p0 to p1 ).
-     * A segment is tested if pa.Y <= p.Y < pb.Y, where pa and pb are the points (from p0,p1) with smallest & largest Y.
-     * When both have the same Y, no intersections are counted but there is a special test to see if the point falls
-     * exactly on the line.
-     * 
-     * Returns false if outside, true if inside; if the point lies exactly on the border, will return \p border_result.
-     * 
-     * \param p The point for which to check if it is inside this polygon
-     * \param border_result What to return when the point is exactly on the border
-     * \return Whether the point \p p is inside this polygon (or \p border_result when it is on the border)
-     */
-    bool inside(Point p, bool border_result = false);
-    
-    /*!
-     * Find the polygon inside which point \p p resides. 
-     * 
-     * We do this by tracing from the point towards the positive X direction,
-     * every line we cross increments the crossings counter. If we have an even number of crossings then we are not inside the polygon.
-     * We then find the polygon with an uneven number of crossings which is closest to \p p.
-     * 
-     * If \p border_result, we return the first polygon which is exactly on \p p.
-     * 
-     * \param p The point for which to check in which polygon it is.
-     * \param border_result Whether a point exactly on a polygon counts as inside
-     * \return The index of the polygon inside which the point \p p resides
-     */
-    unsigned int findInside(Point p, bool border_result = false);
-    
-    /*!
-     * Approximates the convex hull of the polygons.
-     * \p extra_outset Extra offset outward
-     * \return the convex hull (approximately)
-     * 
-     */
-    Polygons convexHull(int extra_outset = 0)
-    {
-        int overshoot = 100000; // 10 cm (hardcoded value)
-        
-        return offset(overshoot, ClipperLib::jtRound).offset(-overshoot+extra_outset, ClipperLib::jtRound);
-    }
-    
     Polygons smooth(int remove_length, int min_area) //!< removes points connected to small lines
     {
         Polygons ret;
@@ -497,46 +525,35 @@ public:
         return ret;
     }
     
-    /*!
-     * removes points connected to similarly oriented lines
-     * 
-     * \param smallest_line_segment_squared maximal squared length of removed line segments
-     * \param allowed_error_distance_squared The square of the distance of the middle point to the line segment of the consecutive and previous point for which the middle point is removed
-     */
-    void simplify(int smallest_line_segment = 10, int allowed_error_distance = 5) 
+    Polygons simplify(int allowed_error_distance) //!< removes points connected to similarly oriented lines
     {
         int allowed_error_distance_squared = allowed_error_distance * allowed_error_distance;
-        int smallest_line_segment_squared = smallest_line_segment * smallest_line_segment;
+        Polygons ret;
         Polygons& thiss = *this;
         for (unsigned int p = 0; p < size(); p++)
         {
-            thiss[p].simplify(smallest_line_segment_squared, allowed_error_distance_squared);
-            if (thiss[p].size() < 3)
-            {
-                remove(p);
-                p--;
-            }
+            thiss[p].simplify(allowed_error_distance_squared, ret.newPoly());
         }
+        return ret;
     }
-    
     /*!
      * Split up the polygons into groups according to the even-odd rule.
-     * Each PolygonsPart in the result has an outline as first polygon, whereas the rest are holes.
+     * Each polygons in the result has an outline as first polygon, whereas the rest are holes.
      */
-    std::vector<PolygonsPart> splitIntoParts(bool unionAll = false) const;
-private:
-    void splitIntoParts_processPolyTreeNode(ClipperLib::PolyNode* node, std::vector<PolygonsPart>& ret) const;
-public:
-    /*!
-     * Split up the polygons into groups according to the even-odd rule.
-     * Each vector in the result has the index to an outline as first index, whereas the rest are indices to holes.
-     * 
-     * \warning Note that this function reorders the polygons!
-     */
-    PartsView splitIntoPartsView(bool unionAll = false);
-private:
-    void splitIntoPartsView_processPolyTreeNode(PartsView& partsView, Polygons& reordered, ClipperLib::PolyNode* node);
-public:
+    std::vector<Polygons> splitIntoParts(bool unionAll = false) const
+    {
+        std::vector<Polygons> ret;
+        ClipperLib::Clipper clipper(clipper_init);
+        ClipperLib::PolyTree resultPolyTree;
+        clipper.AddPaths(polygons, ClipperLib::ptSubject, true);
+        if (unionAll)
+            clipper.Execute(ClipperLib::ctUnion, resultPolyTree, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
+        else
+            clipper.Execute(ClipperLib::ctUnion, resultPolyTree);
+
+        _processPolyTreeNode(&resultPolyTree, ret);
+        return ret;
+    }
     /*!
      * Removes polygons with area smaller than \p minAreaSize (note that minAreaSize is in mm^2, not in micron^2).
      */
@@ -556,12 +573,11 @@ public:
     /*!
      * Removes overlapping consecutive line segments which don't delimit a positive area.
      */
-    void removeDegenerateVerts()
+    Polygons removeDegenerateVerts()
     {
-        Polygons& thiss = *this;
-        for (unsigned int poly_idx = 0; poly_idx < size(); poly_idx++)
+        Polygons ret;
+        for (PolygonRef poly : *this)
         {
-            PolygonRef poly = thiss[poly_idx];
             Polygon result;
             
             auto isDegenerate = [](Point& last, Point& now, Point& next)
@@ -570,7 +586,7 @@ public:
                 Point next_line = next - now;
                 return dot(last_line, next_line) == -1 * vSize(last_line) * vSize(next_line);
             };
-            bool isChanged = false;
+            
             for (unsigned int idx = 0; idx < poly.size(); idx++)
             {
                 Point& last = (result.size() == 0) ? poly.back() : result.back();
@@ -579,7 +595,6 @@ public:
                 if ( isDegenerate(last, poly[idx], next) )
                 { // lines are in the opposite direction
                     // don't add vert to the result
-                    isChanged = true;
                     while (result.size() > 1 && isDegenerate(result[result.size()-2], result.back(), next) )
                     {
                         result.pop_back();
@@ -591,19 +606,10 @@ public:
                 }
             }
             
-            if (isChanged)
-            {
-                if (result.size() > 2) 
-                {   
-                    *poly = *result;
-                }
-                else 
-                {
-                    thiss.remove(poly_idx);
-                    poly_idx--; // effectively the next iteration has the same poly_idx (referring to a new poly which is not yet processed)
-                }
-            }
+            if (result.size() > 2) {  ret.add(result); }
         }
+        
+        return ret;
     }
     /*!
      * Removes the same polygons from this set (and also empty polygons).
@@ -660,7 +666,24 @@ public:
         }
         return result;
     }
-
+            
+private:
+    void _processPolyTreeNode(ClipperLib::PolyNode* node, std::vector<Polygons>& ret) const
+    {
+        for(int n=0; n<node->ChildCount(); n++)
+        {
+            ClipperLib::PolyNode* child = node->Childs[n];
+            Polygons polygons;
+            polygons.add(child->Contour);
+            for(int i=0; i<child->ChildCount(); i++)
+            {
+                polygons.add(child->Childs[i]->Contour);
+                _processPolyTreeNode(child->Childs[i], ret);
+            }
+            ret.push_back(polygons);
+        }
+    }
+public:
     Polygons processEvenOdd() const
     {
         Polygons ret;
@@ -714,32 +737,6 @@ public:
         return ret;
     }
 
-    void applyMatrix(const PointMatrix& matrix)
-    {
-        for(unsigned int i=0; i<polygons.size(); i++)
-        {
-            for(unsigned int j=0; j<polygons[i].size(); j++)
-            {
-                polygons[i][j] = matrix.apply(polygons[i][j]);
-            }
-        }
-    }
-};
-
-/*!
- * A single area with holes. The first polygon is the outline, while the rest are holes within this outline.
- * 
- * This class has little more functionality than Polygons, but serves to show that a specific instance is ordered such that the first Polygon is the outline and the rest are holes.
- */
-class PolygonsPart : public Polygons
-{   
-public:
-    PolygonRef outerPolygon() 
-    {
-        Polygons& thiss = *this;
-        return thiss[0];
-    }
-    
     bool inside(Point p)
     {
         if (size() < 1)
@@ -753,39 +750,94 @@ public:
         }
         return true;
     }
+
+    void applyMatrix(const PointMatrix& matrix)
+    {
+        for(unsigned int i=0; i<polygons.size(); i++)
+        {
+            for(unsigned int j=0; j<polygons[i].size(); j++)
+            {
+                polygons[i][j] = matrix.apply(polygons[i][j]);
+            }
+        }
+    }
+        
+    void debugOutputHTML(const char* filename, bool dotTheVertices = false)
+    {
+        FILE* out = fopen(filename, "w");
+        fprintf(out, "<!DOCTYPE html><html><body>");
+        Point modelSize = max() - min();
+        modelSize.X = std::max(modelSize.X, modelSize.Y);
+        modelSize.Y = std::max(modelSize.X, modelSize.Y);
+        Point modelMin = min();
+
+        fprintf(out, "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width: 500px; height:500px\">\n");
+        for(Polygons& parts : splitIntoParts())
+        {
+            for(unsigned int j=0;j<parts.size();j++)
+            {
+                Polygon poly = parts[j];
+                fprintf(out, "<polygon points=\"");
+                for(Point& p : poly)
+                {
+                    fprintf(out, "%f,%f ", float(p.X - modelMin.X)/modelSize.X*500, float(p.Y - modelMin.Y)/modelSize.Y*500);
+                }
+                if (j == 0)
+                    fprintf(out, "\" style=\"fill:gray; stroke:black;stroke-width:1\" />\n");
+                else
+                    fprintf(out, "\" style=\"fill:red; stroke:black;stroke-width:1\" />\n");
+                
+                if (dotTheVertices)
+                    for(Point& p : poly)
+                        fprintf(out, "<circle cx=\"%f\" cy=\"%f\" r=\"2\" stroke=\"black\" stroke-width=\"3\" fill=\"black\" />", float(p.X - modelMin.X)/modelSize.X*500, float(p.Y - modelMin.Y)/modelSize.Y*500);
+            }
+        }
+        fprintf(out, "</svg>\n");
+        fprintf(out, "</body></html>");
+        fclose(out);
+    }
 };
 
-/*!
- * Extension of vector<vector<unsigned int>> which is similar to a vector of PolygonParts, except the base of the container is indices to polygons into the original Polygons, instead of the polygons themselves
- */
-class PartsView : public std::vector<std::vector<unsigned int>>
+/* Axis aligned boundary box */
+class AABB
 {
 public:
-    Polygons& polygons;
-    PartsView(Polygons& polygons) : polygons(polygons) { }
-    /*!
-     * Get the index of the PolygonsPart of which the polygon with index \p poly_idx is part.
-     * 
-     * \param poly_idx The index of the polygon in \p polygons
-     * \param boundary_poly_idx Optional output parameter: The index of the boundary polygon of the part in \p polygons
-     * \return The PolygonsPart containing the polygon with index \p poly_idx
-     */
-    unsigned int getPartContaining(unsigned int poly_idx, unsigned int* boundary_poly_idx = nullptr);
-    /*!
-     * Assemble the PolygonsPart of which the polygon with index \p poly_idx is part.
-     * 
-     * \param poly_idx The index of the polygon in \p polygons
-     * \param boundary_poly_idx Optional output parameter: The index of the boundary polygon of the part in \p polygons
-     * \return The PolygonsPart containing the polygon with index \p poly_idx
-     */
-    PolygonsPart assemblePartContaining(unsigned int poly_idx, unsigned int* boundary_poly_idx = nullptr);
-    /*!
-     * Assemble the PolygonsPart of which the polygon with index \p poly_idx is part.
-     * 
-     * \param part_idx The index of the part
-     * \return The PolygonsPart with index \p poly_idx
-     */
-    PolygonsPart assemblePart(unsigned int part_idx);
+    Point min, max;
+
+    AABB()
+    : min(POINT_MIN, POINT_MIN), max(POINT_MIN, POINT_MIN)
+    {
+    }
+    AABB(Polygons polys)
+    : min(POINT_MIN, POINT_MIN), max(POINT_MIN, POINT_MIN)
+    {
+        calculate(polys);
+    }
+
+    void calculate(Polygons polys)
+    {
+        min = Point(POINT_MAX, POINT_MAX);
+        max = Point(POINT_MIN, POINT_MIN);
+        for(unsigned int i=0; i<polys.size(); i++)
+        {
+            for(unsigned int j=0; j<polys[i].size(); j++)
+            {
+                if (min.X > polys[i][j].X) min.X = polys[i][j].X;
+                if (min.Y > polys[i][j].Y) min.Y = polys[i][j].Y;
+                if (max.X < polys[i][j].X) max.X = polys[i][j].X;
+                if (max.Y < polys[i][j].Y) max.Y = polys[i][j].Y;
+            }
+        }
+    }
+
+    bool hit(const AABB& other) const
+    {
+        if (max.X < other.min.X) return false;
+        if (min.X > other.max.X) return false;
+        if (max.Y < other.min.Y) return false;
+        if (min.Y > other.max.Y) return false;
+        return true;
+    }
 };
 
 }//namespace cura

src/utils/polygonUtils.cpp

@@ -1,198 +1,52 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
+/** Copyright (C) 2015 Tim Kuipers - Released under terms of the AGPLv3 License */
 #include "polygonUtils.h"
 
 #include <list>
 
-#include "linearAlg2D.h"
 #include "../debug.h"
 namespace cura 
 {
 
-int64_t offset_safe_allowance = 20; // make all offset safe operations a bit less safe to allow for small variations in walls which are supposed to be exactly x perimeters thick
-int64_t in_between_min_dist_half = 10;
-
-void PolygonUtils::offsetExtrusionWidth(const Polygons& poly, bool inward, int extrusionWidth, Polygons& result, Polygons* in_between, bool removeOverlappingPerimeters)
+void offsetExtrusionWidth(Polygons& poly, bool inward, int extrusionWidth, Polygons& result, Polygons* in_between, bool avoidOverlappingPerimeters)
 {
-    int direction = (inward)? -1 : 1;
     int distance = (inward)? -extrusionWidth : extrusionWidth;
-    if (!removeOverlappingPerimeters)
+    if (!avoidOverlappingPerimeters)
     {
         result = poly.offset(distance);
         return;
     } 
     else
     {
-        result = poly.offset(distance*3/2 - direction*offset_safe_allowance).offset(-distance/2 + direction*offset_safe_allowance); // overshoot by half the extrusionWidth
+        result = poly.offset(distance*3/2).offset(-distance/2); // overshoot by half the extrusionWidth
         if (in_between) // if a pointer for in_between is given
-            in_between->add(poly.offset(distance/2 + direction*in_between_min_dist_half).difference(result.offset(-distance/2 - direction*in_between_min_dist_half)));
+            in_between->add(poly.offset(distance/2).difference(result.offset(-distance/2)));
     }
 }
 
-void PolygonUtils::offsetSafe(const Polygons& poly, int distance, int offset_first_boundary, int extrusion_width, Polygons& result, Polygons* in_between, bool removeOverlappingPerimeters)
+
+void offsetSafe(Polygons& poly, int distance, int extrusionWidth, Polygons& result, bool avoidOverlappingPerimeters)
 {
     int direction = (distance > 0)? 1 : -1;
-    if (!removeOverlappingPerimeters)
+    if (!avoidOverlappingPerimeters)
     {
         result = poly.offset(distance);
         return;
     } 
     else
     {
-        result = poly.offset(distance + direction*extrusion_width / 2 - direction*offset_safe_allowance).offset(-direction*extrusion_width/2 + direction*offset_safe_allowance); // overshoot by half the extrusionWidth
-        if (in_between) // if a pointer for in_between is given
-            in_between->add(poly.offset(offset_first_boundary + direction*in_between_min_dist_half).difference(result.offset(-direction * extrusion_width/2 - direction*in_between_min_dist_half)));
+        result = poly.offset(distance + direction*extrusionWidth/2).offset(-direction * extrusionWidth/2);
     }
 }
 
-
-void PolygonUtils::offsetSafe(const Polygons& poly, int distance, int extrusionWidth, Polygons& result, bool removeOverlappingPerimeters)
-{
-    int direction = (distance > 0)? 1 : -1;
-    if (!removeOverlappingPerimeters)
-    {
-        result = poly.offset(distance);
-        return;
-    } 
-    else
-    {
-        result = poly.offset(distance + direction*extrusionWidth/2 - direction*offset_safe_allowance).offset(-direction * extrusionWidth/2 + direction*offset_safe_allowance);
-    }
-}
-
-void PolygonUtils::removeOverlapping(const Polygons& poly, int extrusionWidth, Polygons& result)
+void removeOverlapping(Polygons& poly, int extrusionWidth, Polygons& result)
 {
     result = poly.offset(extrusionWidth/2).offset(-extrusionWidth).offset(extrusionWidth/2);
 }
 
-Point PolygonUtils::getBoundaryPointWithOffset(PolygonRef poly, unsigned int point_idx, int64_t offset)
-{
-    Point p0 = poly[(point_idx > 0) ? (point_idx - 1) : (poly.size() - 1)];
-    Point p1 = poly[point_idx];
-    Point p2 = poly[(point_idx < (poly.size() - 1)) ? (point_idx + 1) : 0];
-    
-    Point off0 = crossZ(normal(p1 - p0, MM2INT(1.0))); // 1.0 for some precision
-    Point off1 = crossZ(normal(p2 - p1, MM2INT(1.0))); // 1.0 for some precision
-    Point n = normal(off0 + off1, -offset);
-    
-    return p1 + n;
-}
-
-/*
- * Implementation assumes moving inside, but moving outside should just as well be possible.
- */
-unsigned int PolygonUtils::moveInside(Polygons& polygons, Point& from, int distance, int64_t maxDist2)
-{
-    Point ret = from;
-    int64_t bestDist2 = std::numeric_limits<int64_t>::max();
-    unsigned int bestPoly = NO_INDEX;
-    bool is_inside = false;
-    for (unsigned int poly_idx = 0; poly_idx < polygons.size(); poly_idx++)
-    {
-        PolygonRef poly = polygons[poly_idx];
-        if (poly.size() < 2)
-            continue;
-        Point p0 = poly[poly.size()-2];
-        Point p1 = poly.back();
-        bool projected_p_beyond_prev_segment = dot(p1 - p0, from - p0) > vSize2(p1 - p0);
-        for(Point& p2 : poly)
-        {   
-            // X = A + Normal( B - A ) * ((( B - A ) dot ( P - A )) / VSize( A - B ));
-            // X = P projected on AB
-            Point& a = p1;
-            Point& b = p2;
-            Point& p = from;
-            Point ab = b - a;
-            Point ap = p - a;
-            int64_t ab_length = vSize(ab);
-            if(ab_length <= 0) //A = B, i.e. the input polygon had two adjacent points on top of each other.
-            {
-                p1 = p2; //Skip only one of the points.
-                continue;
-            }
-            int64_t ax_length = dot(ab, ap) / ab_length;
-            if (ax_length <= 0) // x is projected to before ab
-            {
-                if (projected_p_beyond_prev_segment)
-                { //  case which looks like:   > .
-                    projected_p_beyond_prev_segment = false;
-                    Point& x = p1;
-                    
-                    int64_t dist2 = vSize2(x - p);
-                    if (dist2 < bestDist2)
-                    {
-                        bestDist2 = dist2;
-                        bestPoly = poly_idx;
-                        if (distance == 0) { ret = x; }
-                        else 
-                        { 
-                            Point inward_dir = crossZ(normal(ab,distance * 4) + normal(p1 - p0,distance * 4));
-                            ret = x + normal(inward_dir, distance); // *4 to retain more precision for the eventual normalization 
-                            is_inside = dot(inward_dir, p - x) >= 0;
-                        } 
-                    }
-                }
-                else
-                {
-                    projected_p_beyond_prev_segment = false;
-                    p0 = p1;
-                    p1 = p2;
-                    continue;
-                }
-            }
-            else if (ax_length >= ab_length) // x is projected to beyond ab
-            {
-                projected_p_beyond_prev_segment = true;
-                p0 = p1;
-                p1 = p2;
-                continue;
-            }
-            else 
-            {
-                projected_p_beyond_prev_segment = false;
-                Point x = a + ab * ax_length / ab_length;
-                
-                int64_t dist2 = vSize2(p - x);
-                if (dist2 < bestDist2)
-                {
-                    bestDist2 = dist2;
-                    bestPoly = poly_idx;
-                    if (distance == 0) { ret = x; }
-                    else 
-                    { 
-                        Point inward_dir = crossZ(normal(ab, distance));
-                        ret = x + inward_dir; 
-                        is_inside = dot(inward_dir, p - x) >= 0;
-                    }
-                }
-            }
-            
-            
-            p0 = p1;
-            p1 = p2;
-        }
-    }
-    if (is_inside)
-    {
-        if (bestDist2 < distance * distance)
-        {
-            from = ret;
-        } 
-        else 
-        {
-//            from = from; // original point stays unaltered. It is already inside by enough distance
-        }
-        return bestPoly;
-    }
-    else if (bestDist2 < maxDist2)
-    {
-        from = ret;
-        return bestPoly;
-    }
-    return NO_INDEX;
-}
 
 
-void PolygonUtils::findSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result, int sample_size)
+
+void findSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result, int sample_size)
 {
     PolygonRef poly1 = poly1_result.poly;
     PolygonRef poly2 = poly2_result.poly;
@@ -222,7 +76,40 @@ void PolygonUtils::findSmallestConnection(ClosestPolygonPoint& poly1_result, Clo
     walkToNearestSmallestConnection(poly1_result, poly2_result);    
 }
 
-void PolygonUtils::walkToNearestSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result)
+void findSmallestConnection_OLD(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result, int sample_size)
+{
+    PolygonRef poly1 = poly1_result.poly;
+    PolygonRef poly2 = poly2_result.poly;
+    if (poly1.size() == 0 || poly2.size() == 0)
+    {
+        return;
+    }
+    
+    int bestDist2 = -1;
+    
+    int step1 = std::max<unsigned int>(2, poly1.size() / sample_size);
+    int step2 = std::max<unsigned int>(2, poly2.size() / sample_size);
+    for (unsigned int i = 0; i < poly1.size(); i += step1)
+    {
+        for (unsigned int j = 0; j < poly2.size(); j += step2)
+        {
+            ClosestPolygonPoint here1(i, poly1);
+            ClosestPolygonPoint here2(j, poly2);
+            walkToNearestSmallestConnection(here1, here2);
+            
+            int dist2 = vSize2(here1.location - here2.location);
+            if (bestDist2 == -1 || dist2 < bestDist2)
+            {   
+                bestDist2 = dist2;
+                poly1_result = here1;
+                poly2_result = here2;
+            }
+        }
+    }
+        
+}
+
+void walkToNearestSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result)
 {
     PolygonRef poly1 = poly1_result.poly;
     PolygonRef poly2 = poly2_result.poly;
@@ -246,7 +133,7 @@ void PolygonUtils::walkToNearestSmallestConnection(ClosestPolygonPoint& poly1_re
     }
 }
 
-ClosestPolygonPoint PolygonUtils::findNearestClosest(Point from, PolygonRef polygon, int start_idx)
+ClosestPolygonPoint findNearestClosest(Point from, PolygonRef polygon, int start_idx)
 {
     ClosestPolygonPoint forth = findNearestClosest(from, polygon, start_idx, 1);
     ClosestPolygonPoint back = findNearestClosest(from, polygon, start_idx, -1);
@@ -260,7 +147,7 @@ ClosestPolygonPoint PolygonUtils::findNearestClosest(Point from, PolygonRef poly
     }
 }
 
-ClosestPolygonPoint PolygonUtils::findNearestClosest(Point from, PolygonRef polygon, int start_idx, int direction)
+ClosestPolygonPoint findNearestClosest(Point from, PolygonRef polygon, int start_idx, int direction)
 {
     if (polygon.size() == 0)
     {
@@ -279,7 +166,7 @@ ClosestPolygonPoint PolygonUtils::findNearestClosest(Point from, PolygonRef poly
         Point& p1 = polygon[p1_idx];
         Point& p2 = polygon[p2_idx];
 
-        Point closestHere = LinearAlg2D::getClosestOnLineSegment(from, p1 ,p2);
+        Point closestHere = getClosestOnLine(from, p1 ,p2);
         int64_t dist = vSize2(from - closestHere);
         if (dist < closestDist)
         {
@@ -296,7 +183,7 @@ ClosestPolygonPoint PolygonUtils::findNearestClosest(Point from, PolygonRef poly
     return ClosestPolygonPoint(best, bestPos, polygon);
 }
 
-ClosestPolygonPoint PolygonUtils::findClosest(Point from, Polygons& polygons)
+ClosestPolygonPoint findClosest(Point from, Polygons& polygons)
 {
 
     Polygon emptyPoly;
@@ -328,7 +215,7 @@ ClosestPolygonPoint PolygonUtils::findClosest(Point from, Polygons& polygons)
     return best;
 }
 
-ClosestPolygonPoint PolygonUtils::findClosest(Point from, PolygonRef polygon)
+ClosestPolygonPoint findClosest(Point from, PolygonRef polygon)
 {
     if (polygon.size() == 0)
     {
@@ -348,7 +235,7 @@ ClosestPolygonPoint PolygonUtils::findClosest(Point from, PolygonRef polygon)
         if (p2_idx >= polygon.size()) p2_idx = 0;
         Point& p2 = polygon[p2_idx];
 
-        Point closestHere = LinearAlg2D::getClosestOnLineSegment(from, p1 ,p2);
+        Point closestHere = getClosestOnLine(from, p1 ,p2);
         int64_t dist = vSize2(from - closestHere);
         if (dist < closestDist)
         {
@@ -362,6 +249,35 @@ ClosestPolygonPoint PolygonUtils::findClosest(Point from, PolygonRef polygon)
 }
 
 
+Point getClosestOnLine(Point from, Point p0, Point p1)
+{
+    Point direction = p1 - p0;
+    Point toFrom = from-p0;
+    int64_t projected_x = dot(toFrom, direction) ;
+
+    int64_t x_p0 = 0;
+    int64_t x_p1 = vSize2(direction);
+
+    if (projected_x <= x_p0)
+    {
+        return p0;
+    }
+    if (projected_x >= x_p1)
+    {
+        return p1;
+    }
+    else
+    {
+        if (vSize2(direction) == 0)
+        {
+            std::cout << "warning! too small segment" << std::endl;
+            return p0;
+        }
+        Point ret = p0 + projected_x / vSize(direction) * direction  / vSize(direction);
+        return ret ;
+    }
+
+}
 
 
 
@@ -371,7 +287,12 @@ ClosestPolygonPoint PolygonUtils::findClosest(Point from, PolygonRef polygon)
 
 
 
-bool PolygonUtils::getNextPointWithDistance(Point from, int64_t dist, const PolygonRef poly, int start_idx, int poly_start_idx, GivenDistPoint& result)
+
+
+
+
+
+bool getNextPointWithDistance(Point from, int64_t dist, const PolygonRef poly, int start_idx, int poly_start_idx, GivenDistPoint& result)
 {
     
     Point prev_poly_point = poly[(start_idx + poly_start_idx) % poly.size()];
@@ -448,68 +369,4 @@ bool PolygonUtils::getNextPointWithDistance(Point from, int64_t dist, const Poly
 
 
 
-bool PolygonUtils::polygonCollidesWithlineSegment(PolygonRef poly, Point& transformed_startPoint, Point& transformed_endPoint, PointMatrix transformation_matrix)
-{
-    Point p0 = transformation_matrix.apply(poly.back());
-    for(Point p1_ : poly)
-    {
-        Point p1 = transformation_matrix.apply(p1_);
-        if ((p0.Y >= transformed_startPoint.Y && p1.Y <= transformed_startPoint.Y) || (p1.Y >= transformed_startPoint.Y && p0.Y <= transformed_startPoint.Y))
-        {
-            int64_t x;
-            if(p1.Y == p0.Y)
-            {
-                x = p0.X;
-            }
-            else
-            {
-                x = p0.X + (p1.X - p0.X) * (transformed_startPoint.Y - p0.Y) / (p1.Y - p0.Y);
-            }
-            
-            if (x >= transformed_startPoint.X && x <= transformed_endPoint.X)
-                return true;
-        }
-        p0 = p1;
-    }
-    return false;
-}
-
-bool PolygonUtils::polygonCollidesWithlineSegment(PolygonRef poly, Point& startPoint, Point& endPoint)
-{
-    Point diff = endPoint - startPoint;
-
-    PointMatrix transformation_matrix = PointMatrix(diff);
-    Point transformed_startPoint = transformation_matrix.apply(startPoint);
-    Point transformed_endPoint = transformation_matrix.apply(endPoint);
-
-    return PolygonUtils::polygonCollidesWithlineSegment(poly, transformed_startPoint, transformed_endPoint, transformation_matrix);
-}
-
-bool PolygonUtils::polygonCollidesWithlineSegment(Polygons& polys, Point& transformed_startPoint, Point& transformed_endPoint, PointMatrix transformation_matrix)
-{
-    for(PolygonRef poly : polys)
-    {
-        if (poly.size() == 0) { continue; }
-        if (PolygonUtils::polygonCollidesWithlineSegment(poly, transformed_startPoint, transformed_endPoint, transformation_matrix))
-        {
-            return true;
-        }
-    }
-    
-    return false;
-}
-
-
-bool PolygonUtils::polygonCollidesWithlineSegment(Polygons& polys, Point& startPoint, Point& endPoint)
-{
-    Point diff = endPoint - startPoint;
-
-    PointMatrix transformation_matrix = PointMatrix(diff);
-    Point transformed_startPoint = transformation_matrix.apply(startPoint);
-    Point transformed_endPoint = transformation_matrix.apply(endPoint);
-
-    return polygonCollidesWithlineSegment(polys, transformed_startPoint, transformed_endPoint, transformation_matrix);
-}
-
-
 }//namespace cura

src/utils/polygonUtils.h

@@ -1,11 +1,20 @@
-/** Copyright (C) 2015 Ultimaker - Released under terms of the AGPLv3 License */
-#ifndef UTILS_POLYGON_UTILS_H
-#define UTILS_POLYGON_UTILS_H
+/** Copyright (C) 2015 Tim Kuipers - Released under terms of the AGPLv3 License */
+#ifndef POLYGON_UTILS_H
+#define POLYGON_UTILS_H
 
 #include "polygon.h"
 
 namespace cura 
 {
+    
+//! performs an offset compared to an adjacent inset/outset and also computes the area created by gaps between the two consecutive insets/outsets
+void offsetExtrusionWidth(Polygons& poly, bool inward, int extrusionWidth, Polygons& result, Polygons* in_between, bool avoidOverlappingPerimeters);
+
+//! performs an offset and makes sure the lines don't overlap (ignores any area between the original poly and the resulting poly)
+void offsetSafe(Polygons& poly, int distance, int extrusionWidth, Polygons& result, bool avoidOverlappingPerimeters);
+
+//! performs offsets to make sure the lines don't overlap (ignores any area between the original poly and the resulting poly)
+void removeOverlapping(Polygons& poly, int extrusionWidth, Polygons& result);
 
 /*!
  * Result of finding the closest point to a given within a set of polygons, with extra information on where the point is.
@@ -28,189 +37,69 @@ struct GivenDistPoint
     Point location; //!< Result location
     int pos; //!< Index to the first point in the polygon of the line segment on which the result was found
 };
+
+/*!
+ * Find the two points in two polygons with the smallest distance.
+ * 
+ * \warning The ClosestPolygonPoint::poly fields output parameters should be initialized with the polygons for which to find the smallest connection.
+ * 
+ * \param poly1_result Output parameter: the point at the one end of the smallest connection between its poly and \p poly2_result.poly.
+ * \param poly2_result Output parameter: the point at the other end of the smallest connection between its poly and \p poly1_result.poly.
+ * \param sample_size The number of points on each polygon to start the hill climbing search from. 
+ */
+void findSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result, int sample_size);
+
+/*!
+ * 
+ * \warning Assumes \p poly1_result and \p poly2_result have their pos and poly fields initialized!
+ */
+void walkToNearestSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result);
+
+/*!
+ * Find the nearest closest point on a polygon from a given index.
+ * 
+ * \param from The point from which to get the smallest distance.
+ * \param polygon The polygon on which to find the point with the smallest distance.
+ * \param start_idx The index of the point in the polygon from which to start looking.
+ * \return The nearest point from \p start_idx going along the \p polygon (in both directions) with a locally minimal distance to \p from.
+ */
+ClosestPolygonPoint findNearestClosest(Point from, PolygonRef polygon, int start_idx);
+
+/*!
+ * Find the nearest closest point on a polygon from a given index walking in one direction along the polygon.
+ * 
+ * \param from The point from which to get the smallest distance.
+ * \param polygon The polygon on which to find the point with the smallest distance.
+ * \param start_idx The index of the point in the polygon from which to start looking.
+ * \param direction The direction to walk: 1 for walking along the \p polygon, -1 for walking in opposite direction
+ * \return The nearest point from \p start_idx going along the \p polygon with a locally minimal distance to \p from.
+ */
+ClosestPolygonPoint findNearestClosest(Point from, PolygonRef polygon, int start_idx, int direction);
+
+/*!
+ * Find the point closest to \p from in all polygons in \p polygons.
+ */
+ClosestPolygonPoint findClosest(Point from, Polygons& polygons);
     
-class PolygonUtils 
-{
-public:
-    //! performs an offset compared to an adjacent inset/outset and also computes the area created by gaps between the two consecutive insets/outsets
-    static void offsetExtrusionWidth(const Polygons& poly, bool inward, int extrusionWidth, Polygons& result, Polygons* in_between, bool removeOverlappingPerimeters);
+/*!
+ * Find the point closest to \p from in the polygon \p polygon.
+ */
+ClosestPolygonPoint findClosest(Point from, PolygonRef polygon);
+    
+/*!
+ * Find the point closest to \p from on the line from \p p0 to \p p1
+ */
+Point getClosestOnLine(Point from, Point p0, Point p1);
 
-    /*!
-    * performs an offset compared to an adjacent inset/outset and also computes the area created by gaps between the two consecutive insets/outsets.
-    * This function allows for different extrusion widths between the two insets.
-    */
-    static void offsetSafe(const Polygons& poly, int distance, int offset_first_boundary, int extrusion_width, Polygons& result, Polygons* in_between, bool removeOverlappingPerimeters);
-
-    //! performs an offset and makes sure the lines don't overlap (ignores any area between the original poly and the resulting poly)
-    static void offsetSafe(const Polygons& poly, int distance, int extrusionWidth, Polygons& result, bool removeOverlappingPerimeters);
-
-    //! performs offsets to make sure the lines don't overlap (ignores any area between the original poly and the resulting poly)
-    static void removeOverlapping(const Polygons& poly, int extrusionWidth, Polygons& result);
-
-    /*!
-    * Get a point from the \p poly with a given \p offset.
-    * 
-    * \param poly The polygon.
-    * \param point_idx The index of the point in the polygon.
-    * \param offset The distance the point has to be moved outward from the polygon.
-    * \return A point at the given distance inward from the point on the boundary polygon.
-    */
-    static Point getBoundaryPointWithOffset(PolygonRef poly, unsigned int point_idx, int64_t offset);
-
-    /*!
-    * Moves the point \p from onto the nearest polygon or leaves the point as-is, when the comb boundary is not within \p distance.
-    * Given a \p distance more than zero, the point will end up inside, and conversely outside.
-    * When the point is already in/outside by more than \p distance, \p from is unaltered, but the polygon is returned.
-    * When the point is in/outside by less than \p distance, \p from is moved to the correct place.
-    * 
-    * \param polygons The polygons onto which to move the point
-    * \param from The point to move.
-    * \param distance The distance by which to move the point.
-    * \param maxDist2 The squared maximal allowed distance from the point to the nearest polygon.
-    * \return The index to the polygon onto which we have moved the point.
-    */
-    static unsigned int moveInside(Polygons& polygons, Point& from, int distance = 0, int64_t maxDist2 = std::numeric_limits<int64_t>::max());
-
-    /*!
-    * Find the two points in two polygons with the smallest distance.
-    * 
-    * Note: The amount of preliminary distance checks is quadratic in \p sample_size : `O(sample_size ^2)`.
-    * Further convergence time depends on polygon size and shape.
-    * 
-    * \warning The ClosestPolygonPoint::poly fields output parameters should be initialized with the polygons for which to find the smallest connection.
-    * 
-    * \param poly1_result Output parameter: the point at the one end of the smallest connection between its poly and \p poly2_result.poly.
-    * \param poly2_result Output parameter: the point at the other end of the smallest connection between its poly and \p poly1_result.poly.
-    * \param sample_size The number of points on each polygon to start the hill climbing search from. 
-    */
-    static void findSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result, int sample_size);
-
-    /*!
-    * 
-    * \warning Assumes \p poly1_result and \p poly2_result have their pos and poly fields initialized!
-    */
-    static void walkToNearestSmallestConnection(ClosestPolygonPoint& poly1_result, ClosestPolygonPoint& poly2_result);
-
-    /*!
-    * Find the nearest closest point on a polygon from a given index.
-    * 
-    * \param from The point from which to get the smallest distance.
-    * \param polygon The polygon on which to find the point with the smallest distance.
-    * \param start_idx The index of the point in the polygon from which to start looking.
-    * \return The nearest point from \p start_idx going along the \p polygon (in both directions) with a locally minimal distance to \p from.
-    */
-    static ClosestPolygonPoint findNearestClosest(Point from, PolygonRef polygon, int start_idx);
-
-    /*!
-    * Find the nearest closest point on a polygon from a given index walking in one direction along the polygon.
-    * 
-    * \param from The point from which to get the smallest distance.
-    * \param polygon The polygon on which to find the point with the smallest distance.
-    * \param start_idx The index of the point in the polygon from which to start looking.
-    * \param direction The direction to walk: 1 for walking along the \p polygon, -1 for walking in opposite direction
-    * \return The nearest point from \p start_idx going along the \p polygon with a locally minimal distance to \p from.
-    */
-    static ClosestPolygonPoint findNearestClosest(Point from, PolygonRef polygon, int start_idx, int direction);
-
-    /*!
-    * Find the point closest to \p from in all polygons in \p polygons.
-    */
-    static ClosestPolygonPoint findClosest(Point from, Polygons& polygons);
-        
-    /*!
-    * Find the point closest to \p from in the polygon \p polygon.
-    */
-    static ClosestPolygonPoint findClosest(Point from, PolygonRef polygon);
-
-    /*!
-    * Find the next point (going along the direction of the polygon) with a distance \p dist from the point \p from within the \p poly.
-    * Returns whether another point could be found within the \p poly which can be found before encountering the point at index \p start_idx.
-    * The point \p from and the polygon \p poly are assumed to lie on the same plane.
-    * 
-    * \param from The point from whitch to find a point on the polygon satisfying the conditions
-    * \param start_idx the index of the prev poly point on the poly.
-    * \param poly_start_idx The index of the point in the polygon which is to be handled as the start of the polygon. No point further than this point will be the result.
-    */
-    static bool getNextPointWithDistance(Point from, int64_t dist, const PolygonRef poly, int start_idx, int poly_start_idx, GivenDistPoint& result);
-
-
-
-    /*!
-     * Checks whether a given line segment collides with a given polygon(s).
-     * The transformed_startPoint and transformed_endPoint should have the same
-     * Y coordinate.
-     * 
-     * If the line segment doesn't intersect with any edge of the polygon, but
-     * merely touches it, a collision is also reported. For instance, a
-     * collision is reported when the an endpoint of the line is exactly on the
-     * polygon, and when the line coincides with an edge.
-     * 
-     * \param poly The polygon
-     * \param transformed_startPoint The start point transformed such that it is
-     * on the same horizontal line as the end point
-     * \param transformed_endPoint The end point transformed such that it is on
-     * the same horizontal line as the start point
-     * \param transformation_matrix The transformation applied to the start and
-     * end point to be applied to the polygon(s)
-     * \return whether the line segment collides with the boundary of the
-     * polygon(s)
-     */
-    static bool polygonCollidesWithlineSegment(PolygonRef poly, Point& transformed_startPoint, Point& transformed_endPoint, PointMatrix transformation_matrix);
-
-    /*!
-     * Checks whether a given line segment collides with a given polygon(s).
-     * 
-     * If the line segment doesn't intersect with any edge of the polygon, but
-     * merely touches it, a collision is also reported. For instance, a
-     * collision is reported when the an endpoint of the line is exactly on the
-     * polygon, and when the line coincides with an edge.
-     * 
-     * \param poly The polygon
-     * \param startPoint The start point
-     * \param endPoint The end point
-     * \return whether the line segment collides with the boundary of the
-     * polygon(s)
-     */
-    static bool polygonCollidesWithlineSegment(PolygonRef poly, Point& startPoint, Point& endPoint);
-
-    /*!
-     * Checks whether a given line segment collides with a given polygon(s).
-     * The transformed_startPoint and transformed_endPoint should have the same
-     * Y coordinate.
-     * 
-     * If the line segment doesn't intersect with any edge of the polygon, but
-     * merely touches it, a collision is also reported. For instance, a
-     * collision is reported when the an endpoint of the line is exactly on the
-     * polygon, and when the line coincides with an edge.
-     * 
-     * \param poly The polygon
-     * \param transformed_startPoint The start point transformed such that it is
-     * on the same horizontal line as the end point
-     * \param transformed_endPoint The end point transformed such that it is on
-     * the same horizontal line as the start point
-     * \param transformation_matrix The transformation applied to the start and
-     * end point to be applied to the polygon(s)
-     * \return whether the line segment collides with the boundary of the
-     * polygon(s)
-     */
-    static bool polygonCollidesWithlineSegment(Polygons& polys, Point& transformed_startPoint, Point& transformed_endPoint, PointMatrix transformation_matrix);
-
-    /*!
-     * Checks whether a given line segment collides with a given polygon(s).
-     * 
-     * If the line segment doesn't intersect with any edge of the polygon, but
-     * merely touches it, a collision is also reported. For instance, a
-     * collision is reported when the an endpoint of the line is exactly on the
-     * polygon, and when the line coincides with an edge.
-     * 
-     * \param poly The polygon
-     * \param startPoint The start point
-     * \param endPoint The end point
-     * \return whether the line segment collides with the boundary of the
-     * polygon(s)
-     */
-    static bool polygonCollidesWithlineSegment(Polygons& polys, Point& startPoint, Point& endPoint);
-};
+/*!
+ * Find the next point (going along the direction of the polygon) with a distance \p dist from the point \p from within the \p poly.
+ * Returns whether another point could be found within the \p poly which can be found before encountering the point at index \p start_idx.
+ * The point \p from and the polygon \p poly are assumed to lie on the same plane.
+ * 
+ * \param start_idx the index of the prev poly point on the poly.
+ * \param poly_start_idx The index of the point in the polygon which is to be handled as the start of the polygon. No point further than this point will be the result.
+ */
+bool getNextPointWithDistance(Point from, int64_t dist, const PolygonRef poly, int start_idx, int poly_start_idx, GivenDistPoint& result);
 
 
 }//namespace cura