I got into a situation where the model would endlessly request the directory
contents from the server because we did not notice yet that the server
is actually in maintenance mode while we were expanding the tree view when
changing the tab to the account or when just expanding it by clicking.
This would happen if the directory would first need to be created
through an mkdir propagation job. This job's itemCompleted signal
would trigger the directory to show as SYNC even though its children
are still propagating.
Fix the issue by tracking the sync count for each file, affecting
its parents. This allows us to get rid of the O(n) vector lookup
for each status query, and properly track the hierachical sync
status of a directory.
This also removes the itemCompleted signal emission from the
PropagateDirectory job. Since we only needed for overlay icons, and
since this job doesn't do any direct propagation, we can remove it
to ensure that we won't call itemCompleted twice for the item attached
to Propagate*Mkdir jobs (since the PropagateDirectory is backed by
the same SyncFileItem, instruction and status).
The current way of tracking the need to update the metadata without
propagation using a separate flag makes it difficult to track
priorities between the local and remote tree. The logic is also
difficult to logically cover since the possibilities matrix isn't
100% covered, leaving the flag only used in a few situations
(mostly involving folders, but not only).
The reason we need to change this is to be able to track the sync
state of files for overlay icons. The instruction alone can't be
used since CSYNC_INSTRUCTION_SYNC is used for folders even though
they won't be propagated. Removing this logic is however not possible
without using something else than CSYNC_INSTRUCTION_NONE since too
many codepath interpret (rightfully) this as meaning "nothing to do".
This patch adds a new CSYNC_INSTRUCTION_UPDATE_METADATA instruction
to let the update and reconcile steps tell the SyncEngine to update
the metadata of a file without any propagation. Other flags are left
to be interpretted by the implementation as implicitly needing
metadata update or not, as this was already the case for most file
propagation jobs. For example, CSYNC_INSTRUCTION_NEW for directories
now also implicitly update the metadata.
Since it's not impossible for folders to emit CSYNC_INSTRUCTION_SYNC
or CSYNC_INSTRUCTION_CONFLICT, the corresponding code paths in the
sync engine have been removed.
Since the reconcile step can now know if the local tree needs metadata
update while the remote side might want propagation, the
localMetadataUpdate logic in SyncEngine::treewalkFile now simply use
a CSYNC_INSTRUCTION_UPDATE_METADATA for the local side, which is now
implemented as a different database query.
Add a missing call that we currently only do in slotItemCompleted.
This would normally only affect the first sync and would have
gotten properly update at the end of the sync anyway.
To be able to test the SyncEngine efficiently, a set of server
mocking classes have been implemented on top of QNetworkAccessManager.
The local disk side hasn't been mocked since this would require adding
a large abstraction layer in csync. The SyncEngine is instead pointed
to a different temporary dir in each test and we test by interacting
with files in this directory instead.
The FakeFolder object wraps the SyncEngine with those abstractions
and allow controlling the local files, and the fake remote state
through the FileModifier interface, using a FileInfo tree structure
for the remote-side implementation as well as feeding and comparing
the states on both side in tests.
Tests run fast and require no setup to be run, but each server feature
that we want to test on the client side needs to be implemented in
this fake objects library. For example, the OC-FileId header isn't
set as of this commit, and we can't test the file move logic properly
without implementing it first.
The TestSyncFileStatusTracker tests already contain a few QEXPECT_FAIL
for what I esteem being issues that need to be fixed in order to catch
up on our test coverage without making this patch too huge.
The open function expects a URL, passing only the directory name would
lead HTTP::DAV to try looking it as an hostname on the network and
only return after it timed out.
This is a move away from the original policy where jobs
would only follow redirects in special cases.
Two restrictions are in place:
1. We do not allow protocol downgrades (https -> http)
2. We stop redirects after we find them looping (e.g. old = new url, or
indirectly when looping 10 times).
This is closer to RFC conforming behavior, although currently
we will treat 301 replies like they were 302. This is for a separate
commit.
Error handling (and display) also needs improvement.
Addresses #2791
Once upon a time, the SyncEngine was instantiated once per sync. But now that
the SyncEngine is kept between sync, we need to reset all these variable between
syncs.
Reverts commit 622017adcf
Could be the cause of #5092 and the cost is higher than the benefit if this is the case.
A network request taking more than 30 seconds isn't something unlikely in this world
and shouldn't be a good reason to abort. We should try to untangle the threads
dependencies to properly fix this if possible instead.
It opens a window and connects to a cipher test
page, showing the output from there, that helps for debugging.
The window is enabled by setting the environment variable
OWNCLOUD_SHIBBOLETH_DEBUG
Missing deleteLater when the CleanupPollsJob aborts.
This is only a problem if the SyncEngine is kept alive a long time. Which is
usually not the case in the configuration where poll jobs are used.
While loading the account, only override the server url if Theme::forceConfigAuthType
is set. This restore the behavior from the client 2.1 for theme that did not
use Theme::forceConfigAuthType.
Issue: owncloud/enterprise#1418
This was removed in 0194ebb222
because it breaks on Linux. However, it looks like it is correct
for Windows. In the meantime the surrounding ifdef has changed
from !Q_OS_MAC to Q_OS_WIN, so reverting it makes sense.
Since the SyncEngine now quits and waits for the discovery thread,
the main thread can enter a deadlock where the discovery thread waits
for its directory result.
Add a 2 seconds timer to the discovery thread wait condition
to limit the deadlock time.
This allows creating a new build simply by hitting F7 in visual studio
and then committing the changed files in the binary submodules without
having to know which files to move where.
Since this isn't yet built together with the rest, we can't reliably
use the client version without having to rebuilt the extension manually
on each release. But it would still be nice to be able to tell if a user
has the right version or not loaded, so instead just tag each update of
the DLLs with a separate release version.
This means that every time we update those binaries we'll have to manually
increment the number in the header, but worst case we'll forget from time
to time but we'll be able to know if we didn't, and know if we can rely on
the number or not.
This disables the workaround 487e1fdca5ee04fc98c1ed77898df70d740967c8
for servers that are new enough to support fine grained permissions
on federated shares.
The consequence is that the 'reshare' permission is now granted by
default and that users can edit permissions on the usual fine-grained
level again.
The way the client deals with servers <9.1 is unchanged.
Use a QMap to avoid using a full hashtable for only a few entries, and
clear the QMap once we're done with the measuring. This saves a few
hundred bytes per job during propagation that would otherwise only be
freed at the end of the sync.
During propagation, we create a line for each file, taking memory, but
we delete all lines passed 2000 right at the beginning of the next sync.
Since the user has little chances of being able to read past those 2000
lines in the log, we might as well keep it capped at 2000 also during
propagation to prevent it from eating memory.
The SyncRunFileLog owned by the Folder must be destroyed after the
SyncEngine since the SyncEngine will abort during destruction, resulting
in all jobs being aborted.
It's possible that this crash only happens with a debug build.
The FolderWatcher inserts files to be marked as SYNC and we
currently assume that all file statuses will be updated by the
following sync. It's however possible that the FolderWatcher
notify us of a change that csync won't consider necessary to
propagate, in which case a new status wouldn't be pushed and
the file manager would continue showing this file as syncing.
Re-push the file status when emptying the dirty files list
before propagating to avoid this issue, most likely the OK
status.
No need to allocate (and initialize to 0) a 10 MiB buffer for each files, even
when most files are much smaller than that.
So make sure the buffer that we allocate is not bigger than the file size.
And Also 10 MiB is a bit big for a buffer. 500 KiB should be more than enough.
(Too big allocations can cause problem because of memory fragmentation and such)
We first need to set the abort flag to csync and then aborting the discovery
job, otherwise, the discovery thread could start a new job in the mean time.
We also need to make sure that the thread has existed before we destroy the
exclude list.
Events from the crash reporter suggest that the QNAM and its
child replies might get deleted before returning from this method
and the only possible cause we can see is that the inner event
loop has something to do with it.
Try keeping a ref on the QNAM while in this method to make sure
that it won't get deleted by the inner event loop.
Same fix as in commit 60c101d9
From the crash reporter:
Crash
EXCEPTION_ACCESS_VIOLATION_READ at 0x4
qnetworkreply.cpp in QNetworkReply::request at line 476
propagateupload.cpp in OCC::PUTFileJob::slotTimeout at line 100
moc_abstractnetworkjob.cpp in OCC::AbstractNetworkJob::qt_static_metacall at line 98
qobject.cpp in QMetaObject::activate at line 3716
moc_qtimer.cpp in QTimer::timeout at line 192
qtimer.cpp in QTimer::timerEvent at line 247
qobject.cpp in QObject::event at line 1267
qapplication.cpp in QApplicationPrivate::notify_helper at line 3722
qapplication.cpp in QApplication::notify at line 3505
qcoreapplication.cpp in QCoreApplication::notifyInternal at line 932
FolderDefinition::save and load escapes the alias. We also need to escape
it when we remove it.
New folder can't be created with alias that needs escaping, but old folder
from old config may still exist, and we must allow user to delete them.
For issue #4927:
On Windows 10, we get a notification after the sync is finished for file that were
just downloaded. The guard we have against our "own changes" are only working when
the sync is running and the OwncloudPropagator still alive.
Setting the Environment variable only for owncloud makes in inconsistant with
other Qt application running at the same time.
The users can still set it themself for the whole desktop if they wish.
Addresses #4840
Previously rejecting any kind of certificate meant that the user
was never asked again, even if the certificate changed.
Now we keep track of which certificates were rejected and ask again
if the ones mentioned in the ssl errors change.
mitmproxy is excellent for testing this.
* Progress: Don't count dirs without propagation jobs #4856
These directory SyncFileItems are necessary for bookkeeping
but should not influence the progress display at all.
* Progress: Skip ignored files #4856
The problem in this case is if we rename the file "xxx" to "invalid\file".
The rename will fail because the new filename constains a slash, and it
will be blacklisted.
But then if the user re-rename the file to "valid_name", then we should
invalidate the blacklist entry and retry to upload. But we did not do
that because renaming don't change the mtime and we did not store the
rename target in the database
IL issue 558
This fixes an issue in which too many jobs are started un parallel
while uploading many files, which could cause too much memory usage as the
chunks are stored in memory.
Probably the fix for #4611
Issue #4855
A typo in the context string made the translation lookup fail.
But also the %Ln was not recognized as a plural form by transifex, so only
the singular was translated
The assert was there to make sure that this case wasn't happening
to eventually be properly tested. Remove the assert for now but this
codepath should eventually be unit tested using this specific situation.
Since the windows implementation first does cache lookups using the
path string, directories need to be passed identically as through
RETRIEVE_FILE_STATUS.
Change the convention to never have a trailing slash for directories
in the protocol. This allows the convention to be applied without
having to access the disk (since we'd need to know if the path is
represented by a directory) and also matches the convention of the
rest of the sync engine. Individual file manager plugins are then
responsible of handling pushed paths as not ending with a trailing
slash.
This also:
- Moves the trailing slash removal logic from the SyncFileStatusTracker
to the SocketApi class
- Remove the unneeded QString::normalized call in fileStatus, since
this should already be done by the FolderWatcher and plugins
Since the statuses are cached and that we can't invalidate the cache,
sending NOP would need to be overwritten by the default OK status
once the client successfully connected. But instead of remembering
which files we NOPed, rather wait until we are ready to sync before
sending the REGISTER_PATH message to the socket API client. It will
also prevent the client from sending unnecessary RETRIEVE_FILE_STATUS
requests.
Also remove AccountState::canSync, since it does the same as
isConnected and syncing is not an account responsibility.
Go through fileStatus like other cases to make sure that all use
cases go through the same code path. This also makes sure to use
lookupProblem which will use lower_bound which is more efficient
for larger sets of sync problems.
This also fixes the issue with lookupProblem that prevented it to
properly match an empty pathToMatch, caused by the fact that the
problem map contains relative paths not starting with a slash.
Make sure that we push the new status when the status of the SyncEngine
changed. SyncEngine::started comes a bit late, only when the propagation
starts, although it's better in this case since child folders will
only switch to Sync in aboutToPropagate.
Also fix an issue with SyncEngine::findSyncItem when using an empty
fileName; this would match and return the wrong item, even though
not currently happening with the code since fileStatus won't call
it with an empty fileName anymore.
As before, we rely on metadata-update SyncFileItem entries for parent
directories to notify us that a directory contains files to propagate,
and to know when all children were propagated through its itemCompleted
signal.
Those metadata SyncFileItems however have a None direction and we need
to add a explicit directory check to show them as Sync.
This fix also handles new files as well as existing ones, so no need
to keep a separate logic for new files.
The pull request should have been done against the 2.2 branch, and
the branch would better be merged instead of squashed to keep the
history easier to lookup.
This reverts commit 0469236d80.
* Fix nautilus and nemo plugin branding strings.
Fix for owncloud/enterprise#1314
* nautilus plugin: Add a comment why the line needs to stay unchanged.
propagatedownload.cpp:712:35: error: 'seenLockedFile' is a protected member of 'OCC::OwncloudPropagator'
Signals are protected in Qt4 but public in Qt5, mark the class accessing it
as friend when compiling with Qt4
* Fix the sync status push for parent directories #4682
As before, we rely on metadata-update SyncFileItem entries for parent
directories to notify us that a directory contains files to propagate,
and to know when all children were propagated through its itemCompleted
signal.
Those metadata SyncFileItems however have a None direction and we need
to add a explicit directory check to show them as Sync.
This fix also handles new files as well as existing ones, so no need
to keep a separate logic for new files.
* Fix the root item sync status #4682
Make sure that we push the new status when the status of the SyncEngine
changed. SyncEngine::started comes a bit late, only when the propagation
starts, although it's better in this case since child folders will
only switch to Sync in aboutToPropagate.
Also fix an issue with SyncEngine::findSyncItem when using an empty
fileName; this would match and return the wrong item, even though
not currently happening with the code since fileStatus won't call
it with an empty fileName anymore.
* Simplify the root status logic
Go through fileStatus like other cases to make sure that all use
cases go through the same code path. This also makes sure to use
lookupProblem which will use lower_bound which is more efficient
for larger sets of sync problems.
This also fixes the issue with lookupProblem that prevented it to
properly match an empty pathToMatch, caused by the fact that the
problem map contains relative paths not starting with a slash.
* Avoid a SyncFileStatusTracker private overload with the same name
Having an overload as a private function in the same class makes the
code harder to follow. Rename the private fileStatus to syncFileItemStatus.
* [osx] Fix missing overlay icons on client startup
Since the statuses are cached and that we can't invalidate the cache,
sending NOP would need to be overwritten by the default OK status
once the client successfully connected. But instead of remembering
which files we NOPed, rather wait until we are ready to sync before
sending the REGISTER_PATH message to the socket API client. It will
also prevent the client from sending unnecessary RETRIEVE_FILE_STATUS
requests.
Also remove AccountState::canSync, since it does the same as
isConnected and syncing is not an account responsibility.
Do the visual stuff from designer.
The previous code that was ment to change the color in red did not work
and changed it to gray instead.
Also I don't see why there should be a frame.
Issue #4773
When a conflict-rename or a temporary-rename fails, notify the
LockWatcher. It'll regularly check whether the file has become
accesible again. When it has, another sync is triggered.
owncloud/enterprise#1288
If the downloaded file is empty but the PROPFIND previously announced it
should not have been empty, this might mean the file was somehow corrupted
because of a bug on the server and that we should therefore not accept
the file.
Normaly we accept a change between the actual size of the file and what we
got during discovery because the file might have been updated to a new version
inbetween. But after this patch we won't accept the file if it was replaced
by an empty file.
Will help for issue #4583
Also requested by IL for issue 548
This uses the file watcher to keep track of files that were modified
in order to assign them the blue icon.
This is transient state that's not persisted across restarts.
After discussion and studying docs again we agreed that
the parameter is not neccessary here as it only affects
the process that opens the handle. And we do not want to
do async stuff.
Before commit 1a51b6718a, the wizard was
making sure folder had an alias but this is no longer the case.
So generate still an unique alias.
Alias is not used in the UI any longer, it's just use for internal purposes.
For issue #4737
As discussed on issue ##4460
Having the quote to be queried on subfolder is wrong in the generic case,
so add a branding option to configure it.
This partially reverts commit ff4cdc3161
In the before-propagate slot, new files that wait to be
pushed to the server are remembered in the _syncProblems
map. That way, the parents show a sync icon properly as
asked for in #4682.
After the item has been transfered properly, the item is
removed from the map again because success is the default.
Added in previous commit from pull request #4663
As discussed, we do not need this option so no need to introduce
a new dependency on the config file in the sync engine
If an app modifies the expiration date (for example the password policy
app) then on more recent versions of the server we will get the share
object back REST style. We should use that info!
Fixes#4409
* Add checksums/supportedTypes and checksums/preferredUploadType
capabilities. The default is that no checksum types are supported.
* Remove the transmissionChecksum config option. Servers must now
use the capabilities to indicate that they are fine with the
client sending checksums.
Note: This intentionally breaks brandings that overrode
Theme::transmissionChecksum. The override must be removed and the
server's capabilities must be adjusted to include the new values.
I don't see a reason we should not allow this. We detect
a "failed stat reply" in other ways. Maybe this was a legacy
csync decision somewhow that is not valid anymore?
The reason is that updateFolderView is invoked by the
emitted signal folderSyncStateChange() anyway.
This will reduce the traffic over the SocketAPI nicely,
maybe this was the reason why it was slower than before.
There were two issues:
* With the refactoring of how Folder and SyncEngine relate, the
ignore_hidden_files flag on the CSync context was reset after
each sync run and not updated from the configuration again.
* The folder watcher failed to enumerate hidden folders and thus
didn't watch for changes inside them. (linux only)
SQLITE_DONE is the indicator for not more query results, which is a legal
thing and not an error condition.
Also, check _getFileRecordQuery for null pointer, as close() wipes it.
The problem with QSet is that the QDateTime was part of
the hash, but that does not make sens as it should be unique
per widget and not per <date, widget>
Instead make it a QHash so there is only one entry per widget.
The idea is that the next call to any database operation will try to
reopen the database through the checkConnect() method. So even if there
was a disconnect trom the db file, this will reestablish the connection.
Remove all configure_files:
- Move all tests to cpp files
- Use the QTEST_MAIN macro instead of a generated main.cpp
- Include test*.moc in the cpp to let CMAKE_AUTOMOC call moc
- Pass info through add_definitions instead of generating oc_bin.h with them
This makes sure that build errors points to the original test source
file instead of the generated one in the build directory to be able to
jump and fix errors directly from the IDE's error pane.
Bring back the hardcoded status logic for excluded files.
Since the activity log doesn't even mention those files on purpose,
we can't rely on the SyncEngine to notify us about the status of those files.
Looking up a/aa while an error is present in a/aab/aaba would return
a warning status since a/aa is a substring of a/aab.
Fix the issue by checking if the following character is a slash.
This prevents having to define a Problem structure with dubious
operator overloads to accomplish the same.
Also use std::map::lower_bound to quickly iterate over the
list of problems.
* Remove duplicate remote path
* Use thin progress bar
* Move bandwidth and file info to tooltip
* Shorten overall progress message
This also fixes#4562 by making the layout not dependent on the
width of the displayed text.
This also remove all smartness from the SocketApi about the status
of a file and solely use info from the current and last sync.
This simplifies the logic a lot and prevents any discrepancy between
the status shown in the activity log and the one displayed on the
overlay icon of a file.
The main benefit of the additional simplicity is that we are able
to push all new status of a file reliably (including warnings for
parent folders) to properly update the icon on overlay implementations
that don't allow us invalidating the status cache, like on OS X.
Both errors and warning from the last sync are now kept in a set,
which is used to also affect parent folders of an error.
To make sure that errors don't become warning icons on a second
sync, SyncFileItem::_hasBlacklistEntry is also interpreted as an error.
This also renames StatusIgnore to StatusWarning to match this semantic.
SyncEngine::aboutToPropagate is used in favor of SyncEngine::syncItemDiscovered
since the latter is emitted before file permission warnings are set on the
SyncFileItem. SyncEngine::finished is not used since we have all the
needed information in SyncEngine::itemCompleted.
SyncFileStatus' purpose is to track overlay icon status.
Instead of putting comments and default: clauses in switch
on both sides about unused enums, use different enums.
This also remove STATUS_NEW which is the equivalent of
STATUS_SYNC in all shell extension implementations, and
remove STATUS_UPDATED and STATUS_STAT_ERROR which have
the same semantic as STATUS_UPTODATE and STATUS__ERROR.
This currently is no-op code since the socket API isn't notified
that the tainted folder list changed, and the result is the same
since a sync will be triggered within the next 5 seconds and the
modified folder will be shown as SYNC at that point anyway.
Removing the dependency to the file watcher allows moving the
status estimation logic to libsync.
This will help moving the SyncEngine construction in the constructor
and allow moving functionalities from Folder to SyncEngine or its
delegated objects.
If the user tries to install an older version of a branded client
with shell extensions, and also install the 2.1 ownCloud client
side-by-side, both shell extensions DLLs will be registered and might
lead to both DLLs versions being loaded by exlorer, causing a system
crash.
Since we don't support both branded and non-branded shell extensions
to work at the same time, at least make sure to unregister any legacy
CLSID that could cause explorer to load the previous version DLL.
The policy that was said is that if a notification has no action, the
client can and should display a close-button. This patch does it.
In additon to that, the client needs a blacklist of closed notifcations
otherwise they would re-appear next time the server notifications are
fetched again.
Also, changed the cleanup of not-longer-used widgets to be more robust.
If a notification is not longer in the list that comes from the
server, the notification is removed.
That is mainly for the notifications that are created by the
announcement application
Since the quota is a per-folder value, this will make the displayed data
more useful when a single sync folder is configured.
Of course each subfolder could have a different quota again.
The date we receive from the server is an ISO8601 datetime that
includes the offset from UTC. Qt does correctly parse this
information and creates the appropriate QDateTime object.
Calling setTimeSpec(UTC) will force the timezone offset to 0 and
thereby change the referenced point in time to an incorrect one.
Soldiering on with a broken or incomplete response could lead to
incorrect sync behavior.
Since discovery uses LsCol jobs which already handle errors
correctly, this should not have a significant impact.
In SQLite bindings are not cleared by sqlite3_reset() calls, so
skipping a sqlite3_bind call to create a NULL value doesn't work,
instead the previous value will be written.
To fix this, I clear all bindings in SqlQuery::reset and make sure
to explicitly bind NULL when desired in SqlQuery::bind.
To make sure there's no confusion about SqlQuery::reset and
sqlite3_reset, I rename our method to reset_and_clear_bindings().
The isValid check should be used everywhere the capabilities
are used as the loading of the capabilities is happening
in parallel of the startup, so it is not guaranteed to be
available always.
As interaction is required, the notifications are displayed in a
separate widget above the server activity list.
Note that design and also where we display the notifications can
still be discussed and changed.
If the ownCloud server does not have the activity app enabled,
it returns 999 as status code. If all the configured accounts
do that, this code hides the entire tab with the server
activities.
This is supposed to fix#4533
Helps with small file sync #331
When I benchmarked this, it went up to 6 parallelism and
was about 1/3 faster than the previous fixed 3 parallelism.
Doing more than 6 is dangerous because QNAM limits to 6 TCP
connections and also the server might become a bottleneck.
Should also help for #4081
Previously one could accidentally call Folder::setSyncPaused() and miss
some expected side effects. Before, the correct call was to FolderMan::
slotSetFolderPaused(). Now the setter on Folder has the expected effect.
This will be useful if we ever want to store account-level gui state.
I built this originally because I thought a paused account would be
this kind of state.
The creation doesn't need to be separated from the SyncEngine anymore.
This allows the SyncEngine to be created in fewer steps if we want to
use it in tests.
This moves most of the direct csync code from Folder into the SyncEngine.
The exclude file logic for the context has been wrapped using the
existing ExcludedFiles class as well.
Given that we control all call sites, the only way that this can fail is during
OOM. Also remove the code in csync itself to make sure that it's obvious that
any new error case wouldn't be handled by call sites.
As discussed with Klaas, this seems to be a better compromise.
10MB * 3 prarralel jobs = 30MB in memory, and to retry in case of
disconnection. Which is still reasonable. And might make the upload
almost twice as fast on fast network where the amount of chunk is the
bottleneck (because of more server processing)
Relates to issue #4354
If all the files bring us to past timestamp, it is possibly a backup
restoration in the server. In which case we want don't want to just
overwrite newer files with the older ones.
Issue #2325
This secret key was used to wipe the database. In the past this was
usefull because of many bugs, but now this is not usefull anymore.
And cause trouble because it also erase the selective sync list.
Issue #4182
option(NO_SHIBBOLETH"Build without Shibboleth support. Allow to build the client without QtWebKit"OFF)
if(NO_SHIBBOLETH)
message("Compiling without shibboleth")
add_definitions(-DNO_SHIBBOLETH=1)
endif()
if(APPLE)
set(SOCKETAPI_TEAM_IDENTIFIER_PREFIX""CACHESTRING"SocketApi prefix (including a following dot) that must match the codesign key's TeamIdentifier/Organizational Unit")
@@ -5,11 +5,11 @@ MAINTAINER Daniel Molkentin <danimo@owncloud.com>
ENV TERM ansi
ENV HOME /root
ENV REFRESHED_AT 20160202
ENV REFRESHED_AT 20160421
RUN zypper --non-interactive --gpg-auto-import-keys refresh
RUN zypper --non-interactive --gpg-auto-import-keys ar http://download.opensuse.org/repositories/windows:/mingw/openSUSE_42.1/windows:mingw.repo
RUN zypper --non-interactive --gpg-auto-import-keys ar http://download.opensuse.org/repositories/isv:ownCloud:toolchains:mingw:win32:2.1/openSUSE_Leap_42.1/isv:ownCloud:toolchains:mingw:win32:2.1.repo
RUN zypper --non-interactive --gpg-auto-import-keys ar http://download.opensuse.org/repositories/isv:ownCloud:toolchains:mingw:win32:2.2/openSUSE_Leap_42.1/isv:ownCloud:toolchains:mingw:win32:2.2.repo
RUN zypper --non-interactive --gpg-auto-import-keys install cmake make mingw32-cross-binutils mingw32-cross-cpp mingw32-cross-gcc \
StrCpy$UAC_ERROR_ELEVATE"Ezin izan da goratu, errorea:"
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Instalatzaileak administratzaile baimenak behar ditu, saiatu berriro"
StrCpy$INIT_INSTALLER_RUNNING"Instalatzailea dagoeneko martxan da."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Desinstalatzaile honek administratzaile baimenak behar ditu, saiatu berriro"
StrCpy$UAC_ERROR_LOGON_SERVICE"Saioa hasteko zerbitzua ez dago martxan, bertan behera uzten!"
StrCpy$INIT_UNINSTALLER_RUNNING"Desinstalatzailea dagoeneko martxan da."
StrCpy$SectionGroup_Shortcuts"Lasterbideak"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$UAC_ERROR_ELEVATE"Unable to elevate, error:"
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Toon opmerkingen bij deze uitgave"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Gevonden ${APPLICATION_EXECUTABLE} proces(sen) moet worden gestopt.$\nWilt u dat het installatieprogramma dat voor u doet?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Het te stoppen proces is niet gevonden!"
StrCpy$PageReinstall_NEW_Field_1"Er is een oudere versie van ${APPLICATION_NAME} geïnstalleerd op uw systeem. geadviseerd wordt om de huidige versie te de-installeren voordat de nieuwe versie wordt geïnstalleerd. Selecteer de uit te voeren actie en klik op Verder om door te gaan."
StrCpy$PageReinstall_NEW_Field_2"De-installeren voor installeren"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Kies hoe u ${APPLICATION_NAME} wilt installeren."
StrCpy$PageReinstall_OLD_Field_1"Er is al een recentere versie van ${APPLICATION_NAME} geïnstalleerd! Installeren van een oudere versie wordt niet aangeraden. Als u echt de oudere versie wilt installeren, adviseren we de huidige versie eerst te verwijderen. Kies de actie die u wilt uitvoeren en druk op Verder om door te gaan."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Válaszd ki, hogy szeretnéd telepíteni a következő alkalmazást ${APPLICATION_NAME}."
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Válassza ki, hogy szeretné telepíteni a következő alkalmazást: ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Az ${APPLICATION_NAME} alkalmazás egy újabb verziója már megtalálható a rendszeren. Nem ajánlott egy régebbi verzió telepítése. Ha valóban szeretné a régebbi verziót telepíteni, akkor ajánlott a jelenleg telepített verzió eltávolítása. Válassza ki milyen műveletet szeretne végrehajtani, és nyomja meg a $\"Következő$\" gombot a folytatáshoz."
StrCpy$PageReinstall_SAME_Field_1"Az ${APPLICATION_NAME} alkalmazás ${VERSION} verziója már telepítve van.$↩$\nKérjük válaszd ki milyen műveletet szeretnél végrehajtani, és nyomd meg a „Következő” gombot."
StrCpy$UNINSTALL_MESSAGEBOX"Nem sikerült az ${APPLICATION_NAME} alkalmazás telepítése a '$INSTDIR' könyvtárba.$\n$\nSzeretné mindenképpen folytatni (nem ajánlott)?"
StrCpy$UNINSTALL_ABORT"Az eltávolítást egy felhasználó megszakította"
StrCpy$UNINSTALL_ABORT"Az eltávolítást a felhasználó megszakította"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Wybierz jak chcesz zainstalowaæ ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Zainstalowana jest nowsza wersja ${APPLICATION_NAME}! Niezalecane jest instalowanie starszej wersji. Jeœli naprawdê chcesz zainstalowaæ starsz¹ wersjê lepiej najpierw odinstalowaæ obecn¹ aplikacjê. Wybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} jest ju¿ zainstalowany.$\nWybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
StrCpy$UAC_ERROR_LOGON_SERVICE"Proces logowania nie jest uruchomiony, przerywam !"
StrCpy$INIT_UNINSTALLER_RUNNING"Dezinstalator ju¿ jest uruchomiony."
StrCpy$SectionGroup_Shortcuts"Skróty"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Mostrar notas de lançamento"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Processos(s) ${APPLICATION_EXECUTABLE} em execução. Estes processos precisam de ser interrompidos.$\nDeseja que o instalador os termine automaticamente?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"A terminar os processos ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Não foi encontrado o processo a terminar!"
StrCpy$PageReinstall_NEW_Field_1"Uma versão antiga de ${APPLICATION_NAME} está instalada no sistema. É recomendado que você desinstale a versão atual antes de instalar a mais recente. Selecione a operação que deseja executar e clique em $\"Avançar$\" para continuar."
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"Encontrados ${APPLICATION_EXECUTABLE} processo(s) em execução que precisa(m) de ser interrompido(s).$\nDeseja que o instalador o(s) termine por si?"
StrCpy$ConfirmEndProcess_KILLING_PROCESSES_TEXT"A terminar os processos de ${APPLICATION_EXECUTABLE}."
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"Não foi encontrado nenhum processo para terminar!"
StrCpy$PageReinstall_NEW_Field_1"Está instalada no sistema uma versão antiga de ${APPLICATION_NAME}. É recomendado que desinstale a versão atual antes de instalar a mais recente. Selecione a operação que deseja executar e clique em $\"Seguinte$\" para continuar."
StrCpy$PageReinstall_NEW_Field_2"Desinstalar antes de instalar"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Escolha como pretende instalar ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Uma versão mais recente do ${APPLICATION_NAME} já está instalada! Não é recomendada a instalação de uma versão mais antiga. Se realmente deseja instalar esta versão, aconselha-se a desinstalação da versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
StrCpy$PageReinstall_OLD_Field_1"Uma versão mais recente da aplicação ${APPLICATION_NAME} já está instalada! Não é recomendada a instalação de uma versão mais antiga. Se realmente deseja instalar esta versão, aconselha-se a desinstalação da versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} já está instalada.$\nSelecione a operação que deseja realizar e clique em 'Seguinte' para continuar."
@@ -20,17 +20,17 @@ StrCpy $OPTION_SECTION_SC_SHELL_EXT_DetailPrint "A instalar integração para Wi
StrCpy$OPTION_SECTION_SC_START_MENU_SECTION"Atalho do progama no Menu Inicial"
StrCpy$OPTION_SECTION_SC_START_MENU_DetailPrint"A adicionar o atalho de ${APPLICATION_NAME} ao Menu Inicial."
StrCpy$OPTION_SECTION_SC_DESKTOP_SECTION"Atalho da área de trabalho"
StrCpy$OPTION_SECTION_SC_DESKTOP_DetailPrint"A criar atalhos da área de trabalho"
StrCpy$OPTION_SECTION_SC_DESKTOP_DetailPrint"A criar atalhos na área de trabalho"
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_SECTION"Atalho de início rápido"
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_DetailPrint"A criar atalho de início rápido"
StrCpy$OPTION_SECTION_SC_APPLICATION_Desc"O essencial de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_START_MENU_Desc"Atalho de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Atalho no ambiente de trabalho de ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_DESKTOP_Desc"Atalho do ambiente de trabalho para ${APPLICATION_NAME}."
StrCpy$OPTION_SECTION_SC_QUICK_LAUNCH_Desc"Atalho de início rápido de ${APPLICATION_NAME}."
StrCpy$UNINSTALLER_FILE_Detail"A escrever o Desinstalador"
StrCpy$UNINSTALLER_REGISTRY_Detail"A escrever chaves de registo do instalador"
StrCpy$UNINSTALLER_FINISHED_Detail"Terminado"
StrCpy$UNINSTALL_MESSAGEBOX"Não parece que ${APPLICATION_NAME} esteja instalado no diretório '$INSTDIR'.$\n$\nContinuar na mesma (não recomendado)?"
StrCpy$UNINSTALL_MESSAGEBOX"Não parece que a aplicação ${APPLICATION_NAME} esteja instalada no diretório '$INSTDIR'.$\n$\nContinuar na mesma (não recomendado)?"
StrCpy$UNINSTALL_ABORT"Desinstalação cancelada pelo utilizador"
StrCpy$INIT_NO_QUICK_LAUNCH"Atalho de Início Rápido (N/A)"
StrCpy$INIT_NO_DESKTOP"Atalho do Ambiente de Trabalho (sobrepõe o existente)"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_TITLE"Už je nainštalovaný"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Vyberte si, ako chcete nainštalova� ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Novšia verzia ${APPLICATION_NAME} je už nainštalovaná! Neodporúèam vám nainštalova� staršiu verziu. Ak naozaj chcete nainštalova� túto staršiu verziu, je lepšie najprv odinštalova� aktuálnu verziu. Vyberte operáciu, ktorú chcete vykona�, a kliknite na tlaèidlo Ïalej pre pokraèovanie."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} je už nainštalovaná.$\n$\nVyberte operáciu, ktorú chcete vykona�, a kliknite na tlaèidlo Ïalej pre pokraèovanie."
StrCpy$INIT_UNINSTALLER_RUNNING"Odinštalátor je už spustený."
StrCpy$SectionGroup_Shortcuts"Zástupcovia"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
StrCpy$MUI_FINISHPAGE_SHOWREADME_TEXT_STRING"Mostrar las notas de la versión"
StrCpy$ConfirmEndProcess_MESSAGEBOX_TEXT"El/los proceso/s ${APPLICATION_EXECUTABLE} debe/n ser detenidos.$\n¿Quiere que el instalador lo haga por usted?"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"¡Proceso para detener no encontrado!"
StrCpy$ConfirmEndProcess_KILL_NOT_FOUND_TEXT"¡Proceso para finalizar no encontrado!"
StrCpy$PageReinstall_NEW_Field_1"Una versión anterior de ${APPLICATION_NAME} se encuentra instalada en el sistema. Se recomienda de instalar la versión actual antes de instalar la nueva. Seleccione la operacion deseada y haga click en Siguiente para continuar."
StrCpy$PageReinstall_NEW_Field_2"Desinstalar antes de instalar"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Välj hur du vill installera ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"En nyare version av ${APPLICATION_NAME} är redan installerad! Det rekommenderas inte att du installerar en äldre version. Om du verkligen vill installera denna äldre versionen, är det bättre att du avinstallerar den nuvarande versionen först. Välj den åtgärd du vill utföra och klicka Nästa för att fortsätta."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} är redan installerad.$\n$\nVälj den åtgärd du vill utföra och klicka på Nästa för att fortsätta."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$OPTION_SECTION_SC_SHELL_EXT_SECTION"Integration for Windows Explorer"
StrCpy$OPTION_SECTION_SC_SHELL_EXT_DetailPrint"Installing Integration for Windows Explorer"
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
StrCpy$PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE"Оберіть, як ви хочете установити ${APPLICATION_NAME}."
StrCpy$PageReinstall_OLD_Field_1"Знайдено новішу версію ${APPLICATION_NAME}! Ми не рекомендуємо встановлювати стару версію. Якщо ви все ж бажаєте встановити цю версію, спочатку видаліть поточну версію. Оберіть подальшу дію та натисніть $\"Далі$\"."
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} вже встановлено.$\n$\nОберіть подальшу дію та натисніть $\"Далі$\" для продовження."
StrCpy$UAC_INSTALLER_REQUIRE_ADMIN"Для установки потрібні права адміністратора, спробуйте ще раз"
StrCpy$INIT_INSTALLER_RUNNING"Установка вже запущена."
StrCpy$UAC_UNINSTALLER_REQUIRE_ADMIN"Для видалення потрібні права адміністратора, спробуйте ще раз"
StrCpy$UAC_ERROR_LOGON_SERVICE"Сервіс авторизації не запущений, припиняю!"
StrCpy$INIT_UNINSTALLER_RUNNING"Програма видалення вже запущено."
StrCpy$SectionGroup_Shortcuts"Ярлики"
StrCpy$PageReinstall_SAME_Field_1"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
StrCpy$UAC_ERROR_LOGON_SERVICE"Logon service is not running, aborting!"
The configuration file contains settings using the Microsoft Windows .ini file
@@ -22,3 +22,9 @@ You can change the following configuration settings (must be under the ``[ownClo
-``maxLogLines`` (default: ``20000``) -- Specifies the maximum number of log lines displayed in the log window.
-``chunkSize`` (default: ``5242880``) -- Specifies the chunk size of uploaded files in bytes.
-``promptDeleteAllFiles`` (default: ``true``) -- If a UI prompt should ask for confirmation if it was detected that all files and folders were deleted.
-``notificationRefreshInterval`` (default``300,000``) -- Specifies the default interval of checking for new server notifications in milliseconds.
When disk space is low the ownCloud Client will be unable to synchronize all files. This section describes its behavior in a low disk space situation as well as the options that influence it.
1. Synchronization of a folder aborts entirely if the remaining disk space falls below 50 MB. This threshold can be adjusted with the ``OWNCLOUD_CRITICAL_FREE_SPACE_BYTES`` environment variable.
2. Downloads that would reduce the free disk space below 250 MB will be skipped or aborted. The download will be retried regularly and other synchronization is unaffected. This threshold can be adjusted with the ``OWNCLOUD_FREE_SPACE_BYTES`` environment variable.
Alguns arquivos não foram exibidos porque demasiados arquivos foram alterados neste diff
Mostrar Mais
Referência em uma Nova Issue
Bloquear um usuário
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Piotr M
