Make version check test conditional for now

Fixup ce5be89a18
ownSql: Do not use sqlite3 method not present in older version
2015-08-07 12:46:55 +02:00 · 2015-08-07 11:13:31 +02:00 · 2015-08-07 10:53:18 +02:00
@@ -32,7 +32,7 @@ include(Warnings)
 include(${CMAKE_SOURCE_DIR}/VERSION.cmake)
 include_directories(BEFORE ${CMAKE_CURRENT_BINARY_DIR} "${CMAKE_CURRENT_BINARY_DIR}/src/mirall/")

-# disable the crashreporter if libcrashreporter-qt is not available or we're building for ARM
+# disable the crashrepoter if libcrashreporter-qt is not available or we're building for ARM
 if( CMAKE_SYSTEM_PROCESSOR MATCHES "arm" OR NOT EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/src/3rdparty/libcrashreporter-qt/CMakeLists.txt")
    set( WITH_CRASHREPORTER OFF )
 endif()
@@ -114,16 +114,16 @@ endif()
 # this option creates only libocsync and libowncloudsync
 option(BUILD_LIBRARIES_ONLY "BUILD_LIBRARIES_ONLY" OFF)

-# When this option is enabled, 5xx errors are not added to the blacklist
-# Normally you don't want to enable this option because if a particular file
-# triggers a bug on the server, you want the file to be blacklisted.
+# When this option is enabled, 5xx errors are not added to the clacklist
+# Normaly you don't want to enable this option because if a particular file
+# trigger a bug on the server, you want the file to be blacklisted.
 option(OWNCLOUD_5XX_NO_BLACKLIST "OWNCLOUD_5XX_NO_BLACKLIST" OFF)
 if(OWNCLOUD_5XX_NO_BLACKLIST)
    add_definitions(-DOWNCLOUD_5XX_NO_BLACKLIST=1)
 endif()

 if(APPLE)
-  set( SOCKETAPI_TEAM_IDENTIFIER_PREFIX "" CACHE STRING "SocketApi prefix (including a following dot) that must match the codesign key's TeamIdentifier/Organizational Unit" )
+  set( SOCKETAPI_TEAM_IDENTIFIER_PREFIX "" CACHE STRING "SocketApi prefix (including a following dot) that must match the codesigh key's TeamIdentifier/Organizational Unit" )
 endif()

 #### find libs
@@ -138,7 +138,7 @@ if(HAVE_QT5)
  message(STATUS "Using Qt ${Qt5Core_VERSION_MAJOR}.${Qt5Core_VERSION_MINOR}.x")
  if (${Qt5Core_VERSION_MAJOR} EQUAL "5")
    if (${Qt5Core_VERSION_MINOR} EQUAL "4" OR ${Qt5Core_VERSION_MINOR} GREATER 4)
-      message(STATUS "We do not require Neon in this setup, compile without!")
+      message(STATUS "We would not require Neon in this setup, compile without!")
      set(USE_NEON FALSE)
    else()
      message(STATUS "If possible compile me with Qt 5.4 or higher.")
@@ -6,10 +6,10 @@ We are also available on [IRC][irc].

 ### Bug Reporting Guidelines
 * __Important__: Report the issue using our [template][template], it includes all the
-  information we need to track down the issue.  
+  informations we need to track down the issue.  
 * __SECURITY__: Report any potential security bug to security@owncloud.com following our [security policy](https://owncloud.org/security/) instead of filing an issue in our bug tracker
 * This repository is *only* for issues within the ownCloud desktop client. 
-  Issues in other components should be reported in their own repositores: 
+  Issues in other compontents should be reported in their own repositores: 
  - [ownCloud server](https://github.com/owncloud/core/issues)
  - [ownCloud apps](https://github.com/owncloud/apps/issues) (e.g. Calendar,
    Contacts...)
@@ -36,7 +36,7 @@ Before we're able to merge your code to ownCloud Desktop Client, you need to sig
 our [Contributor Agreement][agreement].

 Please read the [Desktop Client Manual][desktopman] and the [Developer
-Manuals][devmanual] to get useful info like how to create your first
+Manuals][devmanual] to get useful infos like how to create your first
 application or how to test the ownCloud code with phpunit.

 [agreement]: http://owncloud.org/about/contributor-agreement/
@@ -1,54 +1,6 @@
 ChangeLog
 =========
-version 2.0.2 (release 2015-10-21)
-  * csync_file_stat_s: Save a bit of memory
-  * Shibboleth: Add our base user agent to WebKit
-  * SelectiveSync: Increase folder list timeout to 60
-  * Propagation: Try another sync on 423 Locked (#3387)
-  * Propagation: Make 423 Locked a soft error (#3387)
-  * Propagation: Reset upload blacklist if a chunk suceeds
-  * Application: Fix crash on early shutdown (#3898)
-  * Linux: Don't show settings dialog always when launched twice (#3273, #3771, #3485)
-  * win32 vio: Add the OPEN_REPARSE_POINTS flag to the CreateFileW call. (#3813)
-  * AccountSettings: only expand root elements on single click.
-  * AccountSettings: Do not allow to expand the folder list when disconnected.
-  * Use application SHORT name for the name of the MacOSX pkg file (ownBrander).
-  * FolderMan: Fix for removing a syncing folder (#3843)
-  * ConnectionMethodDialog: Don't be insecure on close (#3863)
-  * Updater: Ensure folders are not removed (#3747)
-  * Folder settings: Ensure path is cleaned (#3811)
-  * Propagator: Simplify sub job finished counting (#3844)
-  * Share dialog: Hide settings dialog before showing (#3783)
-  * UI: Only expand 1 level in folder list (#3585)
-  * UI: Allow folder expanding from button click (#3585)
-  * UI: Expand folder treeview on single click (#3585)
-  * GUI: Change tray menu order (#3657)
-  * GUI: Replace term "sign in" with "Log in" and friends.
-  * SetupPage: Fix crash caused by uninitialized Account object.
-  * Use a themable WebDAV path all over.
-  * Units: Back to the "usual" mix units (JEDEC standard).
-  * csync io: Full UNC path support on Win (#3748)
-  * Tray: Don't use the tray workaround with the KDE theme (#3706, #3765)
-  * ShareDialog: Fix folder display (#3659)
-  * AccountSettings: Restore from legacy only once (#3565)
-  * SSL Certificate Error Dialog: show account name (#3729)
-  * Tray notification: Don't show a message about modified folder (#3613) 
-  * PropagateLocalRemove:  remove entries from the DB even if there was an error.
-  * Settings UI improvements (eg. #3713, #3721, #3619 and others)
-  * Folder: Do not create the sync folder if it does not exist (#3692)
-  * Shell integratioon: don't show share menu item for top level folders
-  * Tray: Hide while modifying menus (#3656, #3672)
-  * AddFolder: Improve remote path selection error handling (#3573)
-  * csync_update: Use excluded_traversal() to improve performance (#3638)
-  * csync_excluded: Add fast _traversal() function (#3638)
-  * csync_exclude: Speed up siginificantly (#3638)
-  * AccountSettings: Adjust quota info design (#3644, #3651)
-  * Adjust buttons on remove folder/account questions (#3654)
-
-version 2.0.1 (release 2015-09-01)
-  * AccountWizard: fix when the theme specify a override URL (#3699)
-
-version 2.0.0 (release 2015-08-25)
+version 2.0.0 (release 2015-08-??)
  * Add support for multiple accounts (#3084)
  * Do not sync down new big folders from server without users consent (#3148)
  * Integrate Selective Sync into the default UI
@@ -57,12 +9,11 @@ version 2.0.0 (release 2015-08-25)
  * Use SI units for the file sizes
  * Improve progress reporting during sync (better estimations, show all files, show all bandwidth)
  * Windows: Support paths >255 characters (#57) by using Windows API instead of POSIX API
-  * Windows, OS X: Allow to not sync hidden files (#2086)
  * OS X: Show file name in UI if file has invalid UTF-8 in file name
  * Sharing: Make use of Capability API (#3439)
  * Sharing: Do not allow sharing the root folder (#3495)
  * Sharing: Show thumbnail
-  * Client Updater: Check for updates periodically, not only once per run (#3044)
+  * Updater: Check for updates periodically, not only once per run (#3044)
  * Windows: Remove misleading option to remove sync data (#3461)
  * Windows: Do not provoke AD account locking if password changes (#2186)
  * Windows: Fix installer when installing unprivileged (#2616, #2568)
@@ -70,13 +21,10 @@ version 2.0.0 (release 2015-08-25)
  * SSL Button: Show more information
  * owncloudcmd: Fix --httpproxy (#3465)
  * System proxy: Ask user for credentials if needed
+  * Windows, OS X: Allow to not sync hidden files (#2086)
  * Several fixes and performance improvements in the sync engine
-  * Network: Try to use SSL session tickets/identifiers. Check the SSL button to see if they are used.
+  * Network: Try to SSL session tickets/identifiers
  * Bandwidth Throttling: Provide automatic limit setting for downloads (#3084)
-  * Systray: Workaround for issue with Qt 5.5.0 #3656
-
-version 1.8.4 (release 2015-07-13)
-  * Release to ship a security release of openSSL. No source changes of the ownCloud Client code.

 version 1.8.3 (release 2015-06-23)
  * Fix a bug in the Windows Installer that could crash explorer (#3320)
@@ -14,5 +14,5 @@ set( MAC_INSTALLER_BACKGROUND_FILE "${CMAKE_SOURCE_DIR}/admin/osx/installer-back
 # set( APPLICATION_LICENSE    "${OEM_THEME_DIR}/license.txt )

 option( WITH_CRASHREPORTER "Build crashreporter" OFF )
-set( CRASHREPORTER_SUBMIT_URL "https://crash-reports.owncloud.com/submit" CACHE string "URL for crash reporter" )
+set( CRASHREPORTER_SUBMIT_URL "https://crash-reports.owncloud.com/submit" CACHE string "URL for crash repoter" )
 set( CRASHREPORTER_ICON ":/owncloud-icon.png" )
@@ -27,7 +27,7 @@ https://github.com/owncloud/client.

 ## Building the source code

-[Building the Client](http://doc.owncloud.org/desktop/2.0/building.html)
+[Building the Client](http://doc.owncloud.org/desktop/1.7/building.html)
 in the ownCloud Desktop Client manual.

 ## Maintainers and Contributors
@@ -1,10 +1,10 @@
 set( MIRALL_VERSION_MAJOR 2 )
 set( MIRALL_VERSION_MINOR 0 )
-set( MIRALL_VERSION_PATCH 2 )
+set( MIRALL_VERSION_PATCH 0 )
 set( MIRALL_SOVERSION 0 )

 if ( NOT DEFINED MIRALL_VERSION_SUFFIX )
-    set( MIRALL_VERSION_SUFFIX "git") #e.g. beta1, beta2, rc1
+    set( MIRALL_VERSION_SUFFIX "beta1") #e.g. beta1, beta2, rc1
 endif( NOT DEFINED MIRALL_VERSION_SUFFIX )

 if( NOT DEFINED MIRALL_VERSION_BUILD )
@@ -23,7 +23,7 @@ identity="$3"
 prjfile=$build_path/admin/osx/macosx.pkgproj

 # The name of the installer package
-installer="@APPLICATION_SHORTNAME@-@MIRALL_VERSION_FULL@@MIRALL_VERSION_SUFFIX@"
+installer="@APPLICATION_NAME@-@MIRALL_VERSION_FULL@@MIRALL_VERSION_SUFFIX@"
 installer_file="$installer.pkg"
 installer_file_tar="$installer.pkg.tar"
 installer_file_tar_bz2="$installer.pkg.tar.bz2"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Ez desinstalatu"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Dagoeneko Instalatuta"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Hautatu nola nahi duzun ${APPLICATION_NAME} instalatzea."
 StrCpy $PageReinstall_OLD_Field_1 "${APPLICATION_NAME}ren bertsio berriago bat instalatuta dago! Ez da aholkatzen bertsio zaharrago bat instalatzea. Benetan bertsio zaharrago hau instalatu nahi baduzu, hobe da lehenengo bertsio berria desinstalatzea. Hautatu nahi duzun aukera eta sakatu Hurrengoa jarraitzeko."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} dagoeneko instalatuta dago.\nHautatu zer operazio egin nahi duzu eta klikatu Hurrengoa jarraitzeko."
 StrCpy $PageReinstall_SAME_Field_2 "Gehitu/Berrinstalatu osagaiak"
 StrCpy $PageReinstall_SAME_Field_3 "Desinstalatu ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Desinstalatu ${APPLICATION_NAME}"
@@ -38,6 +39,5 @@ StrCpy $INIT_INSTALLER_RUNNING "Instalatzailea dagoeneko martxan da."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Desinstalatzaile honek administratzaile baimenak behar ditu, saiatu berriro"
 StrCpy $INIT_UNINSTALLER_RUNNING "Desinstalatzailea dagoeneko martxan da."
 StrCpy $SectionGroup_Shortcuts "Lasterbideak"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $UAC_ERROR_ELEVATE "Unable to elevate, error:"
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "No instal·lar"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Ja instal·lat"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Trieu la manera com voleu instal·lar ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Una versió més recent de ${APPLICATION_NAME} ja està instal.lada!! No es recomana instal.lar una versió més antiga. Si realment voleu instal.lar una versió més antiga, és millor primer desinstal.lar la versió actual. Seleccioni l'operació que desitjeu realitzar i feu clic a Següent per a continuar."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} ja està instal.lat.↩\nSeleccioneu l'operació que desitjeu realitzar i feu clic a Següent per continuar."
 StrCpy $PageReinstall_SAME_Field_2 "Afegir/Reinstal.lar components"
 StrCpy $PageReinstall_SAME_Field_3 "Desinstal.lar ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Desinstal.lar ${APPLICATION_NAME}"
@@ -39,5 +40,4 @@ StrCpy $INIT_INSTALLER_RUNNING "L'instal·lador ja s'està executant."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Aquest desinstal·lador requereix accés d'administrador, intenteu-ho de nou."
 StrCpy $INIT_UNINSTALLER_RUNNING "El desinstal·lador ja s'està executant."
 StrCpy $SectionGroup_Shortcuts "Dreceres"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Neodinstalov
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Ji§ nainstalov no"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Zvolte, jak chcete ${APPLICATION_NAME} nainstalovat."
 StrCpy $PageReinstall_OLD_Field_1 "NovØjç¡ verze aplikace ${APPLICATION_NAME} je ji§ nainstalov na. Instalace starç¡ verze se nedoporuŸuje. Pokud opravdu chcete tuto starç¡ verzi nainstalovat, je lepç¡ nejprve odinstalovat souŸasnou verzi. Zvolte po§adovanou operaci a kliknØte na Dalç¡ pro pokraŸov n¡."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} je ji§ nainstalov na.$\n$\nZvolte po§adovanou operaci a kliknØte na Dalç¡ pro pokraŸov n¡."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} je ji§ nainstalov na.\nZvolte po§adovanou operaci a kliknØte na Dalç¡ pro pokraŸov n¡."
 StrCpy $PageReinstall_SAME_Field_2 "Pýidat Ÿi znovu instalovat komponenty"
 StrCpy $PageReinstall_SAME_Field_3 "Odinstalovat ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Odinstalovat ${APPLICATION_NAME}"
@@ -30,7 +30,7 @@ StrCpy $OPTION_SECTION_SC_QUICK_LAUNCH_Desc "Z
 StrCpy $UNINSTALLER_FILE_Detail "Zapisuji odinstal tor"
 StrCpy $UNINSTALLER_REGISTRY_Detail "Zapisuji instal tor do registr…"
 StrCpy $UNINSTALLER_FINISHED_Detail "DokonŸeno"
-StrCpy $UNINSTALL_MESSAGEBOX "Nezd  se, §e ${APPLICATION_NAME} je nainstalov na ve slo§ce '$INSTDIR'.$\n$\nChcete pokraŸovat (nedoporuŸuje se)?"
+StrCpy $UNINSTALL_MESSAGEBOX "Nezd  se, §e ${APPLICATION_NAME} je nainstalov na ve slo§ce '$INSTDIR'.\nChcete pokraŸovat (nedoporuŸuje se)?"
 StrCpy $UNINSTALL_ABORT "Odinstalace zruçena u§ivatelem"
 StrCpy $INIT_NO_QUICK_LAUNCH "Z stupce rychl‚ho spuçtØn¡ (nen¡ k dispozici)"
 StrCpy $INIT_NO_DESKTOP "Z stupce na ploçe (pýep¡çe existuj¡c¡)"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Niet de-installeren"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Al geïnstalleerd"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Kies hoe u ${APPLICATION_NAME} wilt installeren."
 StrCpy $PageReinstall_OLD_Field_1 "Er is al een recentere versie van ${APPLICATION_NAME} geïnstalleerd! Installeren van een oudere versie wordt niet aangeraden. Als u echt de oudere versie wilt installeren, adviseren we de huidige versie eerst te verwijderen. Kies de actie die u wilt uitvoeren en druk op Verder om door te gaan."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is al geïnstalleerd.$\n$\nKies de actie die u uit wil voeren en druk op Verder om door te gaan."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is al geïnstalleerd.\nKies de actie die u wilt uitvoeren en druk op Verder om door te gaan."
 StrCpy $PageReinstall_SAME_Field_2 "Toevoegen/herinstalleren componenten"
 StrCpy $PageReinstall_SAME_Field_3 "De-installeer ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "De-installeer ${APPLICATION_NAME}"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "Kan niet verhogen, fout:"
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "Dit installatieprogramma vereist beheerdersrechten. Probeer het opnieuw"
 StrCpy $INIT_INSTALLER_RUNNING "De Installer is al gestart."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Deze uninstaller vereist Beheerderstoegang, probeer opnieuw"
-StrCpy $UAC_ERROR_LOGON_SERVICE "De aanmeldprocedure is niet actief; er wordt afgebroken!"
 StrCpy $INIT_UNINSTALLER_RUNNING "De uninstaller is al gestart."
 StrCpy $SectionGroup_Shortcuts "Snelkoppelingen"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Do not uninstall"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Already Installed"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Choose how you want to install ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "A newer version of ${APPLICATION_NAME} is already installed! It is not recommended that you install an older version. If you really want to install this older version, it is better to uninstall the current version first. Select the operation you want to perform and click Next to continue."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."
 StrCpy $PageReinstall_SAME_Field_2 "Add/Reinstall components"
 StrCpy $PageReinstall_SAME_Field_3 "Uninstall ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Uninstall ${APPLICATION_NAME}"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Juba paigaldatud"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Vali, kuidas sa soovid paigaldada ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Uuem versioon ${APPLICATION_NAME} on juba paigaldatud! Vanema versiooni paigaldus ei ole soovitatav. Kui tõesti tahad paigaldada vanemat versiooni, siis on parem esmalt eemaldada olemasolev. Vali tehtav toiming ning kliki Jätka."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} on juba paigaldatud.\nVali tehtav toiming ning kliki Jätka."
 StrCpy $PageReinstall_SAME_Field_2 "Lisa/Taaspaigalda komponente"
 StrCpy $PageReinstall_SAME_Field_3 "Desinstalli ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Desinstalli ${APPLICATION_NAME}"
@@ -40,4 +41,3 @@ StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "See desinstallija vajab admini ligip
 StrCpy $UAC_ERROR_LOGON_SERVICE "Sisselogimisteenus ei tööta, katkestamine!"
 StrCpy $INIT_UNINSTALLER_RUNNING "See desinstallija on juba käimas."
 StrCpy $SectionGroup_Shortcuts "Otseteed"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
@@ -1,22 +1,10 @@
 # Auto-generated - do not modify
 StrCpy $MUI_FINISHPAGE_SHOWREADME_TEXT_STRING "نمایش پادداشت های انتشار نسخه"
-StrCpy $ConfirmEndProcess_MESSAGEBOX_TEXT "${APPLICATION_EXECUTABLE} پردازش (ها) که باید متوقف شوند را پیدا کرد. $\nآیا میخواهیم برنامه نصاب این پردازشها را برای شما متوقف کند ؟"
-StrCpy $ConfirmEndProcess_KILLING_PROCESSES_TEXT "حذف پردازش‌های ${APPLICATION_EXECUTABLE}."
 StrCpy $ConfirmEndProcess_KILL_NOT_FOUND_TEXT "پردازش برای از بین بردن یافت نشد!"
-StrCpy $PageReinstall_NEW_Field_1 "نسخه‌ی قدیمی از برنامه ${APPLICATION_NAME}  بر روی سیستم شما نصب شده است، پیشنهاد می‌شود نسخه‌ی فعلی را قبل از نصب حذف کنید. عملیات مورد نظر را انتخاب کنید و برای ادامه روی دکمه Next کلیک کنید."
 StrCpy $PageReinstall_NEW_Field_2 "عمل حذف را قبل از نصب انجام دهید"
 StrCpy $PageReinstall_NEW_Field_3 "حذف نکن"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "از قبل نصب شده است"
-StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "نحوه‌ی نصب ${APPLICATION_NAME} را انتخاب کنید."
-StrCpy $PageReinstall_OLD_Field_1 "نسخه جدیدتری از برنامه  ${APPLICATION_NAME} بر روی سیستم شما نصب شده است، نصب نسخه‌ی قدیمی‌تر پیشنهاد نمی‌شود. درصورتیکه میخواهید نسخه‌ی قدیمی را نصب کنید، حذف نسخه‌ی کنونی قبل از اجرای نصب جدید پیشنهاد می‌شود. عملیات مورد نظر را انتخاب و بر روی دکمه‌ی Next کلیک کنید."
-StrCpy $PageReinstall_SAME_Field_1 "نسخه ${VERSION} از ${APPLICATION_NAME}  هم‌اکنون نصب شده است.$↩$\nعملیات مورد نظر را انتخاب و بر روی دکمه Next کلیک کنید."
 StrCpy $PageReinstall_SAME_Field_2 "افزودن/نصب مجدد اجزا"
-StrCpy $PageReinstall_SAME_Field_3 "حذف ${APPLICATION_NAME}"
-StrCpy $UNINSTALLER_APPDATA_TITLE "حذف ${APPLICATION_NAME}"
-StrCpy $PageReinstall_SAME_MUI_HEADER_TEXT_SUBTITLE "گزینه نگهداری را به منظور اجرا انتخاب کنید."
-StrCpy $SEC_APPLICATION_DETAILS "نصب ضروریات ${APPLICATION_NAME}"
-StrCpy $OPTION_SECTION_SC_SHELL_EXT_SECTION "یکپارچه‌سازی با Windows Explorer"
-StrCpy $OPTION_SECTION_SC_SHELL_EXT_DetailPrint "نصب یکپارچه‌ساز با Windows Explorer"
 StrCpy $OPTION_SECTION_SC_START_MENU_SECTION "بازکردن میانبر منو برنامه"
 StrCpy $OPTION_SECTION_SC_START_MENU_DetailPrint "افزودن میانبر ${APPLICATION_NAME} به استارت منو ."
 StrCpy $OPTION_SECTION_SC_DESKTOP_SECTION "میانبر دسکتاپ"
@@ -35,9 +23,21 @@ StrCpy $UNINSTALL_ABORT "عمل حذف توسط کاربر متوقف شد"
 StrCpy $INIT_NO_QUICK_LAUNCH "میانبر بازکردن سریع ( N/A )"
 StrCpy $INIT_NO_DESKTOP "میانبر دسکتاپ (رونویسی وجود دارد)"
 StrCpy $UAC_ERROR_ELEVATE "مشکل در بالااوردن ، خطا : "
-StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "برای نصب، دسترسی مدیر سیستم نیاز است، مجددا تلاش کنید"
 StrCpy $INIT_INSTALLER_RUNNING "نصاب از قبل در حال اجراست."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "حذف برنامه نیاز به دسترسی مدیر دارد ، لطفا دوباره سعی کنید"
-StrCpy $UAC_ERROR_LOGON_SERVICE "سرویس ورود اجرا نیست، درحال لغو نصب!"
 StrCpy $INIT_UNINSTALLER_RUNNING "حذف کننده از قبل در حال اجراست."
 StrCpy $SectionGroup_Shortcuts "میانبرها"
+StrCpy $ConfirmEndProcess_MESSAGEBOX_TEXT "Found ${APPLICATION_EXECUTABLE} process(s) which need to be stopped.$\nDo you want the installer to stop these for you?"
+StrCpy $ConfirmEndProcess_KILLING_PROCESSES_TEXT "Killing ${APPLICATION_EXECUTABLE} processes."
+StrCpy $PageReinstall_NEW_Field_1 "An older version of ${APPLICATION_NAME} is installed on your system. It is recommended that you uninstall the current version before installing. Select the operation you want to perform and click Next to continue."
+StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Choose how you want to install ${APPLICATION_NAME}."
+StrCpy $PageReinstall_OLD_Field_1 "A newer version of ${APPLICATION_NAME} is already installed! It is not recommended that you install an older version. If you really want to install this older version, it is better to uninstall the current version first. Select the operation you want to perform and click Next to continue."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."
+StrCpy $PageReinstall_SAME_Field_3 "Uninstall ${APPLICATION_NAME}"
+StrCpy $UNINSTALLER_APPDATA_TITLE "Uninstall ${APPLICATION_NAME}"
+StrCpy $PageReinstall_SAME_MUI_HEADER_TEXT_SUBTITLE "Choose the maintenance option to perform."
+StrCpy $SEC_APPLICATION_DETAILS "Installing ${APPLICATION_NAME} essentials."
+StrCpy $OPTION_SECTION_SC_SHELL_EXT_SECTION "Integration for Windows Explorer"
+StrCpy $OPTION_SECTION_SC_SHELL_EXT_DetailPrint "Installing Integration for Windows Explorer"
+StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "This installer requires admin access, try again"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Asennettu jo"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Valitse miten ${APPLICATION_NAME} asennetaan."
 StrCpy $PageReinstall_OLD_Field_1 "Uudempi versio sovelluksesta ${APPLICATION_NAME} on jo asennettu! Vanhan version asennus ei ole suositeltavaa. Jos todella haluat asentaa vanhemman version, kannattaa poistaa nykyisen version asennus ensin. Valitse minkä toimenpiteen haluat suorittaa ja paina Seuraava jatkaaksesi."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} on jo asennettu.$\n$\nValitse haluamasi toiminto ja napsauta Seuraava jatkaaksesi."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} on jo asennettu.\nValitse suoritettava toimenpide ja napsauta Seuraava jatkaaksesi."
 StrCpy $PageReinstall_SAME_Field_2 "Lisää/uudelleenasenna komponentteja"
 StrCpy $PageReinstall_SAME_Field_3 "Poista ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Poista ${APPLICATION_NAME}"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Ne pas désinstaller"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Déjà installé"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Choisissez comment installer ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Une version plus récente de ${APPLICATION_NAME} est déjà installée ! Il n'est pas recommandé d'installer une version plus ancienne. Si vous voulez vraiment installer cette version plus ancienne, il est préférable de d'abord désinstaller la version courante. Sélectionnez l'opération que vous voulez exécuter et cliquez sur Suivant pour continuer."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} est déjà installé.$\n$\nSélectionnez l'opération que vous souhaitez effectuer et cliquez sur Suivant pour continuer."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} est déjà installé.\nSélectionnez l'opération que vous voulez exécuter et cliquez sur Suivant pour continuer."
 StrCpy $PageReinstall_SAME_Field_2 "Ajouter/Réinstaller des composants"
 StrCpy $PageReinstall_SAME_Field_3 "Désinstaller ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Désinstaller ${APPLICATION_NAME}"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "Échec d'élévation, erreur :"
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "Cet installateur requiert les droits administrateur, essayez à nouveau"
 StrCpy $INIT_INSTALLER_RUNNING "Une installation est déjà en cours."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Ce désinstallateur requiert les droits administrateur, essayez à nouveau"
-StrCpy $UAC_ERROR_LOGON_SERVICE "Service de logon non lancé ! Abandon."
 StrCpy $INIT_UNINSTALLER_RUNNING "Une désinstallation est déjà en cours."
 StrCpy $SectionGroup_Shortcuts "Raccourcis"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Non desinstalar"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Xa instalado"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Escolla como quere instalar ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Ten instalada unha versión actualizada do ${APPLICATION_NAME}! recomendámoslle que non instale unha versión anterior. Se realmente quere instalar esta versión máis antiga, é preferíbel que desinstale a versión actual antes de instalar. Seleccione a operación que quere realizar e prema en Seguinte para continuar."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} xa está instalado.\nSeleccione a operación que que quere realizar e prema en Seguinte para continuar."
 StrCpy $PageReinstall_SAME_Field_2 "Engadir/reinstalar compoñentes"
 StrCpy $PageReinstall_SAME_Field_3 "Desinstalar ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Desinstalar ${APPLICATION_NAME}"
@@ -40,4 +41,3 @@ StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Este desinstalador require acceso de admi
 StrCpy $UAC_ERROR_LOGON_SERVICE "O servizo de acceso non está en execución, cancelando!"
 StrCpy $INIT_UNINSTALLER_RUNNING "O desinstalador xa está en execución."
 StrCpy $SectionGroup_Shortcuts "Atallos"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Nicht entfernen"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Bereits installiert"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Wählen Sie die Methode, mit der sie ${APPLICATION_NAME} installieren wollen."
 StrCpy $PageReinstall_OLD_Field_1 "Eine neuere Version von  ${APPLICATION_NAME} ist bereits installiert! Es wird nicht empfohlen, eine ältere Version zu installieren. Wollen Sie dies trotzdem tun, so sollten Sie die aktuelle Version zunächst entfernen. Wählen Sie eine Vorgehensweise und wählen dann $\"Weiter$\"."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} ist bereits installiert.\nWählen Sie eine Vorgehensweise und klicken Sie auf $\"Weiter$\"."
 StrCpy $PageReinstall_SAME_Field_2 "Komponenten hinzufügen"
 StrCpy $PageReinstall_SAME_Field_3 "${APPLICATION_NAME} entfernen"
 StrCpy $UNINSTALLER_APPDATA_TITLE "${APPLICATION_NAME} entfernen"
@@ -39,5 +40,4 @@ StrCpy $INIT_INSTALLER_RUNNING "Das Installationsprogramm wird bereits ausgef
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Das Deinstallationsprogramm erfordert Administrator-Rechte. Bitte erneut versuchen."
 StrCpy $INIT_UNINSTALLER_RUNNING "Das Deinstallationsprogramm wird bereits ausgeführt."
 StrCpy $SectionGroup_Shortcuts "Verknüpfungen"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Ήδη εγκατεστημένη"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Επιλέξτε πώς θέλετε να εγκαταστήσετε την ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Μια νεώτερη έκδοση της ${APPLICATION_NAME} είναι ήδη εγκατεστημένη! Δεν συνίσταται να εγκαταστείσετε μια παλαιότερη έκδοση. Εάν θέλετε πραγματικά να εγκαταστήσετε αυτήν την παλαιότερη έκδοση, είναι καλύτερο να απεγκαταστήσετε την τρέχουσα έκδοση πρώτα. Επιλέξτε τη διαδικασία που επιθυμείτε να εκτελέσετε και επιλέξτε Επόμενο για να συνεχίσετε."
-StrCpy $PageReinstall_SAME_Field_1 "Η ${APPLICATION_NAME} ${VERSION} είναι ήδη εγκατεστημένη.$\n$\nΕπιλέξτε τη λειτουργία που επιθυμείτε να εκτελέσετε και επιλέξτε Επόμενο για να συνεχίσετε."
+StrCpy $PageReinstall_SAME_Field_1 "Η ${APPLICATION_NAME} ${VERSION} είναι ήδη εγκατεστημένη.\n\nΕπιλέξτε τη διαδικασία που επιθυμείτε να εκτελέσετε και επιλέξτε Επόμενο για να συνεχίσετε."
 StrCpy $PageReinstall_SAME_Field_2 "Προσθήκη/ Επανεγκατάσταση συνιστωσών"
 StrCpy $PageReinstall_SAME_Field_3 "Απεγκατάσταση ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Απεγκατάσταση ${APPLICATION_NAME}"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Ne távolítsa el"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Már telepítve"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Válaszd ki, hogy szeretnéd telepíteni a következő alkalmazást ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Az ${APPLICATION_NAME} alklamazás egy újabb verziója már megtalálható a rendszeren. Nem ajánlott egy régebbi verzió telepítése. Ha valóban szeretné a régebbi verziót telepíteni, akkor ajánlott a jelenleg telepített verzió eltávolítása. Válassza ki milyen műveletet szeretne végrehajtani, és nyomja meg a $\"Következő$\" gombot a folytatáshoz."
-StrCpy $PageReinstall_SAME_Field_1 "Az ${APPLICATION_NAME} alkalmazás ${VERSION} verziója már telepítve van.$↩$\nKérjük válaszd ki milyen műveletet szeretnél végrehajtani, és nyomd meg a  „Következő” gombot."
+StrCpy $PageReinstall_SAME_Field_1 "Az ${APPLICATION_NAME} alkalmazás ${VERSION} verziója már telepítve van.\nKérem válassza ki milyen műveletet szeretne végrehajtan, és nyomja meg a $\"Következő$\" gombot."
 StrCpy $PageReinstall_SAME_Field_2 "Komponens hozzáadása/újratelepítése"
 StrCpy $PageReinstall_SAME_Field_3 "${APPLICATION_NAME} eltávolítása"
 StrCpy $UNINSTALLER_APPDATA_TITLE "${APPLICATION_NAME} eltávolítása"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Non disinstallare"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Già installato"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Scegli come desideri installare ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Una versione più recente di ${APPLICATION_NAME} è già installata! Non è consigliabile installare una versione più vecchia. Se vuoi davvero installare una versione più vecchia, ti consigliamo di rimuovere prima la versione attuale. Scegli l'operazione da eseguire e fai clic su Avanti per continuare."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} è già installato.$\n$\nSeleziona l'operazione che desideri eseguire e fai clic su Avanti per continuare.."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} è già installato.\nSeleziona l'operazione che desideri eseguire e fai clic su Avanti per continuare."
 StrCpy $PageReinstall_SAME_Field_2 "Aggiungi/Reinstalla i componenti"
 StrCpy $PageReinstall_SAME_Field_3 "Disinstalla ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Disinstalla ${APPLICATION_NAME}"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "インストール済"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "${APPLICATION_NAME} のインストール方法を選択する"
 StrCpy $PageReinstall_OLD_Field_1 "${APPLICATION_NAME} の最新バージョンがすでにインストールされています。\n旧バージョンのインストールはお勧めしません。旧バージョンのインストールが本当に必要な場合は、まず最新バージョンをアンインストールしてから、旧バージョンをインストールしてください。\nオペレーションを選択し、次へをクリックする。"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} は、${VERSION} が既にインストールされています。$\n$\n実行したい操作を選択し、次へをクリックする。"
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION}　はすでにインストールされています。\n実行するオペレーションを選択し、次へをクリックする"
 StrCpy $PageReinstall_SAME_Field_2 "追加/再インストールコンポーネント"
 StrCpy $PageReinstall_SAME_Field_3 "${APPLICATION_NAME} をアンインストール"
 StrCpy $UNINSTALLER_APPDATA_TITLE "${APPLICATION_NAME} をアンインストール"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "このインストーラーは、管理者権限が必要です。インストールを再試行してください。"
 StrCpy $INIT_INSTALLER_RUNNING "インストーラーは、すでに起動しています。"
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "このアンインストーラーは、管理者権限が必要です。アンインストールを再試行してください。"
-StrCpy $UAC_ERROR_LOGON_SERVICE "ログオンサービスが動いていません。中止します。"
 StrCpy $INIT_UNINSTALLER_RUNNING "アンインストーラーは、すでに起動しています。"
 StrCpy $SectionGroup_Shortcuts "ショートカット"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Ikke avinstaller"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Allerede installert"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Velg hvordan du vil installere ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "En nyere versjon av ${APPLICATION_NAME} er allerede installert! Det anbefales ikke at du installerer en eldre versjon. Hvis du virkelig ønsker å installere denne eldre versjonen, er det bedre å avinstallere gjeldende versjon først. Velg hva du vil gjøre og klikk Neste for å fortsette."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} er installert allerede.$\n$\nVelg hva du ønsker å gjøre og klikk Neste for å fortsette."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} er allerede installert.\nVelg hva du vil gjøre og klikk Neste for å fortsette."
 StrCpy $PageReinstall_SAME_Field_2 "Legg til/installer komponenter på nytt"
 StrCpy $PageReinstall_SAME_Field_3 "Avinstaller ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Avinstaller ${APPLICATION_NAME}"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "Klarte ikke
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "Dette installasjonsprogrammet krever administrasjonstilgang. Prøv igjen"
 StrCpy $INIT_INSTALLER_RUNNING "Installasjonsprogrammet kjører allerede."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Avinstallasjonsprogrammet krever administrasjonstilgang. Prøv igjen"
-StrCpy $UAC_ERROR_LOGON_SERVICE "Påloggingstjenesten kjører ikke, avbryter!"
 StrCpy $INIT_UNINSTALLER_RUNNING "Avinstallasjonsprogrammet kjører allerede."
 StrCpy $SectionGroup_Shortcuts "Snarveier"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Nie usuwaj "
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Ju¿ zainstalowane"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Wybierz jak chcesz zainstalowaæ ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Zainstalowana jest nowsza wersja ${APPLICATION_NAME}! Niezalecane jest instalowanie starszej wersji. Jeœli naprawdê chcesz zainstalowaæ starsz¹ wersjê lepiej najpierw odinstalowaæ obecn¹ aplikacjê. Wybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} jest ju¿ zainstalowany.\nWybierz operacjê któr¹ chcesz wykonaæ i naciœnij przycisk Dalej."
 StrCpy $PageReinstall_SAME_Field_2 "Doda/Przeinstaluj komponenty"
 StrCpy $PageReinstall_SAME_Field_3 "Odinstaluj ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Odinstaluj ${APPLICATION_NAME}"
@@ -39,5 +40,4 @@ StrCpy $INIT_INSTALLER_RUNNING "Instalator ju
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Ten dezinstalator potrzebuje uprawnieñ administratora, spróbuj ponownie"
 StrCpy $INIT_UNINSTALLER_RUNNING "Dezinstalator ju¿ jest uruchomiony."
 StrCpy $SectionGroup_Shortcuts "Skróty"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Não desinstale"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Já instalado"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Escolha como pretende instalar ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Uma versão mais recente do ${APPLICATION_NAME}  já está instalada! Não é recomendada a instalação de uma versão mais antiga. Se realmente deseja instalar esta versão, aconselha-se a desinstalação da versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} já está instalada.\nSelecione a operação que deseja realizar e clique em 'Seguinte' para continuar."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} já está instalado.\nSelecione a operação que deseja fazer, e clique Seguinte para continuar."
 StrCpy $PageReinstall_SAME_Field_2 "Adicionar/Reinstalar Componentes"
 StrCpy $PageReinstall_SAME_Field_3 "Desinstalar ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Desinstalar ${APPLICATION_NAME}"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "Incapaz de elevar, erro:"
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "Este instalador precisa de permissões de administrador, tente novamente"
 StrCpy $INIT_INSTALLER_RUNNING "O instalador já está em execução."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Este desinstalador requer permissões de administrador, tente novamente"
-StrCpy $UAC_ERROR_LOGON_SERVICE "O serviço do início de sessão não está em execução, a abortar!"
 StrCpy $INIT_UNINSTALLER_RUNNING "O desinstalador já está em execução."
 StrCpy $SectionGroup_Shortcuts "Atalhos"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "N
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Já Instalado"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Escolha como você deseja instalar ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "A versão mais recente do ${APPLICATION_NAME} já está instalado! Não é recomendado que você instale uma versão mais antiga. Se você realmente deseja instalar esta versão mais antiga, é melhor desinstalar a versão atual primeiro. Selecione a operação que deseja executar e clique em Avançar para continuar."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} já está instalado.$\n$\nSelecione a operação que você quer realizar e clique Próximo para continuar."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${version} já está instalado. \nSelecione a operação que deseja executar e clique em Avançar para continuar."
 StrCpy $PageReinstall_SAME_Field_2 "Adicionar/reinstalar componentes"
 StrCpy $PageReinstall_SAME_Field_3 "Desinstalar ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Desinstalar ${APPLICATION_NAME}"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Не устанавливать"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Уже установлено"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Выберите, как вы хотите установить ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Новая версия ${APPLICATION_NAME} уже установлена! Не рекомендуется устанавливать старую версию. Если вы действительно хотите установить эту старую версию, то сначала лучше удалить текущую версию. Выберите желаемое действие и нажмите Далее для продолжения."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} уже установлен.$\n$\nУкажите действие и нажмите Далее для продолжения."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} уже установлена.\nВыберите желаемое действие и нажмите Далее для продолжения."
 StrCpy $PageReinstall_SAME_Field_2 "Добавить/Переустановить компоненты"
 StrCpy $PageReinstall_SAME_Field_3 "Удалить ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Удалить ${APPLICATION_NAME}"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "Невозможно повысить привиле
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "Этому установщику требуются права администратора, попробуйте ещё раз"
 StrCpy $INIT_INSTALLER_RUNNING "Установщик уже запущен."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Этому деинсталлятору требуются права администратора, попробуйте ещё раз"
-StrCpy $UAC_ERROR_LOGON_SERVICE "Служба входа в систему не запущена, прерывание!"
 StrCpy $INIT_UNINSTALLER_RUNNING "Программа удаления уже выполняется."
 StrCpy $SectionGroup_Shortcuts "Ярлыки"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "不要卸载"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "已经安装"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "选择如何安装${APPLICATION_NAME}。"
 StrCpy $PageReinstall_OLD_Field_1 "较新版本的 ${APPLICATION_NAME} 已经安装！安装较旧版本的程序是不推荐的。如果您希望继续安装较旧版本，建议先卸载较新版本。选择您想要执行的操作并点击下一步以继续。"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} 已经安装。$\n$\n请选择想要执行的操作并点击下一步。"
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} 已经安装。\n请选择想要执行的操作并点击下一步。"
 StrCpy $PageReinstall_SAME_Field_2 "增加/重装组件"
 StrCpy $PageReinstall_SAME_Field_3 "卸载${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "卸载${APPLICATION_NAME}"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Neodin
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Už je nainštalovaný"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Vyberte si, ako chcete nainštalova� ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Novšia verzia ${APPLICATION_NAME} je už nainštalovaná! Neodporúèam vám nainštalova� staršiu verziu. Ak naozaj chcete nainštalova� túto staršiu verziu, je lepšie najprv odinštalova� aktuálnu verziu. Vyberte operáciu, ktorú chcete vykona�, a kliknite na tlaèidlo Ïalej pre pokraèovanie."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} je už nainštalovaná.\nVyberte operáciu, ktorú chcete vykona�, a kliknite na tlaèidlo Ïalej pre pokraèovanie."
 StrCpy $PageReinstall_SAME_Field_2 "Prida�/Preinštalova� komponenty"
 StrCpy $PageReinstall_SAME_Field_3 "Odinštalova� ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Odinštalova� ${APPLICATION_NAME}"
@@ -39,5 +40,4 @@ StrCpy $INIT_INSTALLER_RUNNING "In
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Tento odinštalátor vyžaduje admin prístup, skúste to znova"
 StrCpy $INIT_UNINSTALLER_RUNNING "Odinštalátor je už spustený."
 StrCpy $SectionGroup_Shortcuts "Zástupcovia"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Ne odstrani namestitve"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Program je že nameščen"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Izberite način namestitve programa ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Novejša različica programa ${APPLICATION_NAME} je že nameščena! Ni priporočljivo namestiti starejše. V kolikor želite vseeno nadaljevati z namestitvijo, prej odstranite obstoječo različico. Izberite opravilo in pritisnite gumb za nadaljevanje."
+StrCpy $PageReinstall_SAME_Field_1 "Program ${APPLICATION_NAME} ${VERSION} je že nameščen. Izberite opravilo in pritisnite gumb za nadaljevanje."
 StrCpy $PageReinstall_SAME_Field_2 "Dodaj/Ponovno namesti programe"
 StrCpy $PageReinstall_SAME_Field_3 "Odstrani ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Odstrani ${APPLICATION_NAME}"
@@ -39,5 +40,4 @@ StrCpy $INIT_INSTALLER_RUNNING "Namestilnik je
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Program za odstranjevanje namestitve zahteva skrbniška dovoljenja."
 StrCpy $INIT_UNINSTALLER_RUNNING "Program za odstranjevanje namestitve je že zagnan."
 StrCpy $SectionGroup_Shortcuts "Bližnjice"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -8,8 +8,8 @@ StrCpy $PageReinstall_NEW_Field_2 "Desinstalar antes de instalar"
 StrCpy $PageReinstall_NEW_Field_3 "No desinstalar"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Ya está instalado"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Elija cómo quiere instalar ${APPLICATION_NAME}."
-StrCpy $PageReinstall_OLD_Field_1 "Una nueva versión de ${APPLICATION_NAME} ya está instalada. No es recomendable instalar una versión anterior. Si realmente quiere instalar esta versión anterior, es mejor que desinstale la versión actual primero. Seleccione la operación que desea realizar y pulse Siguiente para continuar."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} ya está instalado.$\n$\nSeleccione la operación que desea realizar y haga click en Siguiente para continuar."
+StrCpy $PageReinstall_OLD_Field_1 "Una nueva versión de ${APPLICATION_NAME} ya está instalada. No es recomendable instalar una versión anterior. Si realmente quiere instalar esta versión anterior, es mejor que desinstale la versión actual primero. Seleccione la operación que desea realizar y pulse Next para continuar."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} ya está instalada.\nSeleccione la operación que desea realizar y pulse Next para continuar."
 StrCpy $PageReinstall_SAME_Field_2 "Añadir/Reinstalar componentes"
 StrCpy $PageReinstall_SAME_Field_3 "Desinstalar ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Desinstalar ${APPLICATION_NAME}"
@@ -30,7 +30,7 @@ StrCpy $OPTION_SECTION_SC_QUICK_LAUNCH_Desc "Lanzador R
 StrCpy $UNINSTALLER_FILE_Detail "Escribiendo desinstalador"
 StrCpy $UNINSTALLER_REGISTRY_Detail "Escribiendo claves en el registro del instalador"
 StrCpy $UNINSTALLER_FINISHED_Detail "Terminado"
-StrCpy $UNINSTALL_MESSAGEBOX "Parece que ${APPLICATION_NAME} no está instalado en el directorio '$INSTDIR'.$$ ¿Continuar de todos modos? (No recomendado)"
+StrCpy $UNINSTALL_MESSAGEBOX "Parece que ${APPLICATION_NAME} no está instalado en el directorio '$INSTDIR'.$$ ¿Continuar de todos modos? (No Recomendado)"
 StrCpy $UNINSTALL_ABORT "Desinstalación cancelada por el usuario"
 StrCpy $INIT_NO_QUICK_LAUNCH "Atajo de inicio rápido (N/A)"
 StrCpy $INIT_NO_DESKTOP "Atajo de escritorio (sobreescribe el existente)"
@@ -30,7 +30,7 @@ StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Este des-instalador requiere acceso admin
 StrCpy $INIT_UNINSTALLER_RUNNING "El des-instalador ya esta corriendo"
 StrCpy $SectionGroup_Shortcuts "Accesos Directos"
 StrCpy $ConfirmEndProcess_MESSAGEBOX_TEXT "Found ${APPLICATION_EXECUTABLE} process(s) which need to be stopped.$\nDo you want the installer to stop these for you?"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."
 StrCpy $OPTION_SECTION_SC_SHELL_EXT_SECTION "Integration for Windows Explorer"
 StrCpy $OPTION_SECTION_SC_SHELL_EXT_DetailPrint "Installing Integration for Windows Explorer"
 StrCpy $OPTION_SECTION_SC_QUICK_LAUNCH_SECTION "Quick Launch Shortcut"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Avinstallera inte"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Redan installerad"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Välj hur du vill installera ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "En nyare version av ${APPLICATION_NAME} är redan installerad! Det rekommenderas inte att du installerar en äldre version. Om du verkligen vill installera denna äldre versionen, är det bättre att du avinstallerar den nuvarande versionen först. Välj den åtgärd du vill utföra och klicka Nästa för att fortsätta."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} är redan installerad.\nVälj den åtgärd du vill utföra och klicka Nästa för att fortsätta."
 StrCpy $PageReinstall_SAME_Field_2 "Lägg till/Ominstallera komponenter"
 StrCpy $PageReinstall_SAME_Field_3 "Avinstallera ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Avinstallera ${APPLICATION_NAME}"
@@ -37,7 +38,6 @@ StrCpy $INIT_INSTALLER_RUNNING "Installationsprogrammet körs redan."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Detta avinstallationsprogram  kräver administratörsrättigheter, försök igen"
 StrCpy $INIT_UNINSTALLER_RUNNING "Avinstallationsprogrammet körs redan."
 StrCpy $SectionGroup_Shortcuts "Genvägar"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $OPTION_SECTION_SC_SHELL_EXT_SECTION "Integration for Windows Explorer"
 StrCpy $OPTION_SECTION_SC_SHELL_EXT_DetailPrint "Installing Integration for Windows Explorer"
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "อย่าถอนการติดตั
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "ติดตั้งแล้ว"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "เลือกวิธีที่คุณต้องการติดตั้ง ${APPLICATION_NAME}"
 StrCpy $PageReinstall_OLD_Field_1 "รุ่นใหม่ของ ${APPLICATION_NAME} ถูกติดตั้งแล้ว! เราไม่แนะนำให้คุณติดตั้งรุ่นเก่า ถ้าคุณอยากจะติดตั้งรุ่นเก่าก็สามารถสอนการติดตั้งได้"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} ถูกติดตั้งไปแล้ว$ $\nเลือกดำเนินงานที่คุณต้องการและคลิกถัดไปเพื่อดำเนินการต่อ"
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} ได้ถูกติดตั้งแล้ว เลือกการดำเนินการที่คุณต้องการที่จะดำเนินการและคลิกถัดไปเพื่อดำเนินการต่อ"
 StrCpy $PageReinstall_SAME_Field_2 "ส่วนประกอบ เพิ่ม/ติดตั้งใหม่ "
 StrCpy $PageReinstall_SAME_Field_3 "ถอนการติดตั้ง ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "ถอนการติดตั้ง ${APPLICATION_NAME}"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "ไม่สามารถที่จะยกร
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "การติดตั้งนี้จะต้องมีการเข้าถึงผู้ดูแลระบบ กรุณาลองอีกครั้ง"
 StrCpy $INIT_INSTALLER_RUNNING "กำลังทำการติดตั้ง"
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "การถอนการติดตั้งนี้จะต้องมีการเข้าถึงส่วนผู้ดูแลระบบ กรุณาลองอีกครั้ง"
-StrCpy $UAC_ERROR_LOGON_SERVICE "บริการเข้าสู่ระบบไม่ทำงาน กำลังยกเลิก!"
 StrCpy $INIT_UNINSTALLER_RUNNING "กำลังทำการถอนการติดตั้ง"
 StrCpy $SectionGroup_Shortcuts "ทางลัด"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,7 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Kald
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Zaten Yüklü"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "${APPLICATION_NAME} uygulamasýný nasýl yüklemek istediðinizi seçin."
 StrCpy $PageReinstall_OLD_Field_1 "${APPLICATION_NAME} uygulamasýnýn daha yeni sürümü zaten yüklü! Daha eski bir sürümünü yüklemeniz önerilmez. Gerçekten bu eski sürümü yüklemek isterseniz, ilk olarak geçerli sürümü kaldýrmanýz tavsiye edilir. Yapmak istediðiniz iþlemi seçin ve devam etmek üzere Ýleri týklayýn."
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} zaten yüklü.$\n$\nYapmak istediðiniz iþlemi seçin ve devam etmek için Ýleri týklayýn."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} zaten yüklü.\n\nYapmak istediðiniz iþlemi seçin ve devam etmek için Ýleri týklayýn."
 StrCpy $PageReinstall_SAME_Field_2 "Bileþenleri ekle/yeniden yükle"
 StrCpy $PageReinstall_SAME_Field_3 "${APPLICATION_NAME} uygulamasýný kaldýr"
 StrCpy $UNINSTALLER_APPDATA_TITLE "${APPLICATION_NAME} uygulamasýný kaldýr"
@@ -38,6 +38,6 @@ StrCpy $UAC_ERROR_ELEVATE "Y
 StrCpy $UAC_INSTALLER_REQUIRE_ADMIN "Bu yükleyici yönetici eriþimi gerektiriyor, yeniden deneyin"
 StrCpy $INIT_INSTALLER_RUNNING "Yükleyici zaten çalýþýyor."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Bu kaldýrýcý yönetici eriþimi gerektiriyor, yeniden deneyin"
-StrCpy $UAC_ERROR_LOGON_SERVICE "Oturum açýlacak sunucu çalýþmadýðýndan iptal ediliyor!"
 StrCpy $INIT_UNINSTALLER_RUNNING "Kaldýrýcý zaten çalýþýyor."
 StrCpy $SectionGroup_Shortcuts "Kýsayollar"
+StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -9,6 +9,7 @@ StrCpy $PageReinstall_NEW_Field_3 "Не видаляти"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_TITLE "Установлено"
 StrCpy $PageReinstall_NEW_MUI_HEADER_TEXT_SUBTITLE "Оберіть, як ви хочете установити ${APPLICATION_NAME}."
 StrCpy $PageReinstall_OLD_Field_1 "Знайдено новішу версію ${APPLICATION_NAME}! Ми не рекомендуємо встановлювати стару версію. Якщо ви все ж бажаєте встановити цю версію, спочатку видаліть поточну версію. Оберіть подальшу дію та натисніть $\"Далі$\"."
+StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} вже встановлено.↩\nОберіть подальшу дію та натисніть $\"Далі$\"."
 StrCpy $PageReinstall_SAME_Field_2 "Додати/Перевстановити компоненти"
 StrCpy $PageReinstall_SAME_Field_3 "Видалити ${APPLICATION_NAME}"
 StrCpy $UNINSTALLER_APPDATA_TITLE "Видалити ${APPLICATION_NAME}"
@@ -39,5 +40,4 @@ StrCpy $INIT_INSTALLER_RUNNING "Установка вже запущена."
 StrCpy $UAC_UNINSTALLER_REQUIRE_ADMIN "Для видалення потрібні права адміністратора, спробуйте ще раз"
 StrCpy $INIT_UNINSTALLER_RUNNING "Програма видалення вже запущено."
 StrCpy $SectionGroup_Shortcuts "Ярлики"
-StrCpy $PageReinstall_SAME_Field_1 "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
 StrCpy $UAC_ERROR_LOGON_SERVICE "Logon service is not running, aborting!"
@@ -65,9 +65,9 @@ msgstr "A newer version of ${APPLICATION_NAME} is already installed! It is not r

 #. PageReinstall_SAME_Field_1
 msgid ""
-"${APPLICATION_NAME} ${VERSION} is already installed.$\r$\n"
+"${APPLICATION_NAME} ${VERSION} is already installed.\r\n"
 "Select the operation you want to perform and click Next to continue."
-msgstr "${APPLICATION_NAME} ${VERSION} is already installed.$\r$\nSelect the operation you want to perform and click Next to continue."
+msgstr "${APPLICATION_NAME} ${VERSION} is already installed.\r\nSelect the operation you want to perform and click Next to continue."

 #. PageReinstall_SAME_Field_2
 msgid "Add/Reinstall components"
@@ -10,11 +10,8 @@
        <file>resources/warning.png</file>
        <file>resources/warning@2x.png</file>
        <file>resources/settings.png</file>
-        <file>resources/settings@2x.png</file>
        <file>resources/activity.png</file>
-        <file>resources/activity@2x.png</file>
        <file>resources/network.png</file>
-        <file>resources/network@2x.png</file>
        <file>resources/lock-http.png</file>
        <file>resources/lock-http@2x.png</file>
        <file>resources/lock-https.png</file>
@@ -85,7 +85,7 @@ else(UNIX AND NOT WIN32)
 endif (UNIX AND NOT WIN32)

 if (MSVC)
-    # Use secure functions by default and suppress warnings about
+    # Use secure functions by defaualt and suppress warnings about
    #"deprecated" functions
    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /D _CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES=1")
    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /D _CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES_COUNT=1")
@@ -4,27 +4,20 @@

 # This module defines
 #  INOTIFY_INCLUDE_DIR, where to find inotify.h, etc.
-#  INOTIFY_LIBRARY_DIR, the directory holding the inotify library.
 #  INOTIFY_FOUND, If false, do not try to use inotify.
 # also defined, but not for general use are
 #  INOTIFY_LIBRARY, where to find the inotify library.

 find_path(INOTIFY_INCLUDE_DIR sys/inotify.h 
-          PATH_SUFFIXES inotify)
+          HINTS /usr/include/${CMAKE_LIBRARY_ARCHITECTURE})
 mark_as_advanced(INOTIFY_INCLUDE_DIR)

-find_library(INOTIFY_LIBRARY inotify PATH_SUFFIXES lib/inotify)
-
-get_filename_component(INOTIFY_LIBRARY_DIR ${INOTIFY_LIBRARY} PATH)
-mark_as_advanced(INOTIFY_LIBRARY_DIR)
-
 # all listed variables are TRUE
 # handle the QUIETLY and REQUIRED arguments and set INOTIFY_FOUND to TRUE if
 include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(INOTIFY DEFAULT_MSG INOTIFY_INCLUDE_DIR INOTIFY_LIBRARY_DIR)
+find_package_handle_standard_args(INOTIFY DEFAULT_MSG INOTIFY_INCLUDE_DIR)

 IF(INOTIFY_FOUND)
  SET(INotify_INCLUDE_DIRS ${INOTIFY_INCLUDE_DIR})
-  SET(INotify_LIBRARY_DIRS ${INOTIFY_LIBRARY_DIR})
 ENDIF(INOTIFY_FOUND)

@@ -107,7 +107,7 @@ ReserveFile "${NSISDIR}\Plugins\InstallOptions.dll"
 !define MEMENTO_REGISTRY_KEY "Software\Microsoft\Windows\CurrentVersion\Uninstall\${APPLICATION_NAME}"

 ;-----------------------------------------------------------------------------
-; Modern User Interface (MUI) definitions and setup.
+; Modern User Interface (MUI) defintions and setup.
 ;-----------------------------------------------------------------------------
 !define MUI_ABORTWARNING
 !define MUI_ICON ${NSI_PATH}\installer.ico
@@ -556,7 +556,7 @@ Section -post
   DetailPrint $UNINSTALLER_REGISTRY_Detail
   SetDetailsPrint listonly

-   ;Version numbers used to detect existing installation version for comparison.
+   ;Version numbers used to detect existing installation version for comparisson.
   WriteRegStr HKLM "Software\${APPLICATION_VENDOR}\${APPLICATION_NAME}" "" $INSTDIR
   WriteRegDWORD HKLM "Software\${APPLICATION_VENDOR}\${APPLICATION_NAME}" "VersionMajor" "${VER_MAJOR}"
   WriteRegDWORD HKLM "Software\${APPLICATION_VENDOR}\${APPLICATION_NAME}" "VersionMinor" "${VER_MINOR}"
@@ -37,7 +37,7 @@ IF (DOXYGEN_FOUND)
  # we need latex for doxygen because of the formulas
  FIND_PACKAGE(LATEX)
  IF    (NOT LATEX_COMPILER)
-    MESSAGE(STATUS "latex command LATEX_COMPILER not found but usually required. You will probably get warnings and user interaction on doxy run.")
+    MESSAGE(STATUS "latex command LATEX_COMPILER not found but usually required. You will probably get warnings and user inetraction on doxy run.")
  ENDIF (NOT LATEX_COMPILER)
  IF    (NOT MAKEINDEX_COMPILER)
    MESSAGE(STATUS "makeindex command MAKEINDEX_COMPILER not found but usually required.")
@@ -29,12 +29,12 @@ project=gets.chomp

 printf("\n")

-print("Other projects to include (e.g. \"owutil tinyxml\", leave emtpy to skip): ")
+print("Other projects to includes (e.g. \"owutil tinyxml\", leave emtpy to skip): ")
 otherprojects=gets.chomp

 printf("\n")

-print("Definitions (leave empty to skip): ")
+print("Defininitions (leave empty to skip): ")
 definitions=gets.chomp

 cmakePublicIncDirName = project.upcase+"_PUBLIC_INCLUDE_DIRS"
@@ -21,9 +21,9 @@ version 0.91.3  (released 2013-12-11, ownCloud Client 1.5.0rc1)
 version 0.91.2 (released 2013-12-10, ownCloud Client 1.5.0beta3)
 * have translatable error message for indiv. file errors.
 * Use uint64_t for inode on win32 to fix a type glitch.
- * Add test that directories are properly moved.
+ * Add test that directrories are properly moved.
 * Handle symlinks correctly.
- * No longer recurse into ignored directories in update 
+ * Do not longer recurse into ignored directories in update 
   phase.
 * Added proper symlink detection for win32 platform.

@@ -77,7 +77,7 @@ version 0.90.0  (released 2013-09-04, ownCloud Client 1.4.0)
  * Added c_rename function to csync std.
  * Fix: Do renames of files before any puts.
  * Improved database integrity checks.
-  * Improvements of database writing efficiency.
+  * Improvements of database writing efficiendy.
  * Fix: stat file on win32 even if its opened by application.
  * httpbf: configurable block size and threshold.
  * Many fixes found by a Coverity check.
@@ -159,7 +159,7 @@ version 0.70.0 and 0.70.1 were beta versions.

 version 0.60.2  (released 2012-11-26)
  * Migration to cross platform testing system cmocka.
-  * Fixed various minor things incl. potential mem leaks.
+  * Fixed variuos minor things incl. potential mem leaks.
  * Clang fixes.
  * Moved journal database to sync directory.
  * Fixed more csync->ocsync renaming issues.
@@ -247,7 +247,7 @@ version 0.50.0 (released 2013-08-01)
  * Added new logging framework (removed log4c dependency).
  * Added new config parser (removed iniparser dependency).
  * Added cmocka tests.
-  * Added a way to export file_tree_walk functions.
+  * Added a way to exported file_tree_walk functions.
  * Added capabilities for modules.
  * Added possiblity to push information to the modules.
  * Added iconv support to support various char sets.
@@ -20,7 +20,7 @@ sqlite3 is a runtime requirement. libsmbclient is needed for
 the smb plugin, libssh for the sftp plugin. libneon is required for the 
 ownCloud plugin.

-Note that these version numbers are versions we know work correctly. If you
+Note that these version numbers are version we know works correctly. If you
 build and run csync successfully with an older version, please let us know.


@@ -63,7 +63,7 @@ CMake options using `cmakesetup` (Windows) or `ccmake` (GNU/Linux and MacOS X).

 ## Installing

-Before installing you can run the tests if everything is working:
+Befor installing you can run the tests if everything is working:

    make test

@@ -13,7 +13,7 @@ CONTRIBUTIONS
 =============

 If you want to contribute to the development of the software then please join
-the mailing list. Patches are accepted preferably created with git and we are
+the mailing list. Patches are accepted preferebly created with git and we are
 always glad to receive feedback or suggestions to the address
 csync-devel@csync.org.
 More information on the various mailing lists can be found at
@@ -101,8 +101,7 @@ enum csync_status_codes_e {
    CSYNC_STATUS_INDIVIDUAL_EXCLUDE_LONG_FILENAME,
    CYSNC_STATUS_FILE_LOCKED_OR_OPEN,
    CSYNC_STATUS_INDIVIDUAL_EXCLUDE_HIDDEN,
-    CSYNC_STATUS_INVALID_CHARACTERS,
-    CSYNC_STATUS_INDIVIDUAL_STAT_FAILED
+    CSYNC_STATUS_INVALID_CHARACTERS
 };

 typedef enum csync_status_codes_e CSYNC_STATUS;
@@ -144,7 +143,7 @@ enum csync_ftw_type_e {
 };


-#define FILE_ID_BUF_SIZE 36
+#define FILE_ID_BUF_SIZE 21

 // currently specified at https://github.com/owncloud/core/issues/8322 are 9 to 10
 #define REMOTE_PERM_BUF_SIZE 15
@@ -44,7 +44,24 @@
 static
 #endif
 int _csync_exclude_add(c_strlist_t **inList, const char *string) {
-    return c_strlist_add_grow(inList, string);
+    c_strlist_t *list;
+
+    if (*inList == NULL) {
+        *inList = c_strlist_new(32);
+        if (*inList == NULL) {
+            return -1;
+        }
+    }
+
+    if ((*inList)->count == (*inList)->size) {
+        list = c_strlist_expand(*inList, 2 * (*inList)->size);
+        if (list == NULL) {
+            return -1;
+        }
+        *inList = list;
+    }
+
+    return c_strlist_add(*inList, string);
 }

 int csync_exclude_load(const char *fname, c_strlist_t **list) {
@@ -169,190 +186,210 @@ bool csync_is_windows_reserved_word(const char* filename) {
  return false;
 }

-static CSYNC_EXCLUDE_TYPE _csync_excluded_common(c_strlist_t *excludes, const char *path, int filetype, bool check_leading_dirs) {
-    size_t i = 0;
-    const char *p = NULL;
-    const char *bname = NULL;
-    size_t blen = 0;
-    char *conflict = NULL;
-    int rc = -1;
-    CSYNC_EXCLUDE_TYPE match = CSYNC_NOT_EXCLUDED;
-    CSYNC_EXCLUDE_TYPE type  = CSYNC_NOT_EXCLUDED;
+CSYNC_EXCLUDE_TYPE csync_excluded_no_ctx(c_strlist_t *excludes, const char *path, int filetype) {
+  size_t i = 0;
+  const char *p = NULL;
+  char *bname = NULL;
+  char *dname = NULL;
+  char *prev_dname = NULL;
+  char *conflict = NULL;
+  int rc = -1;
+  CSYNC_EXCLUDE_TYPE match = CSYNC_NOT_EXCLUDED;
+  CSYNC_EXCLUDE_TYPE type  = CSYNC_NOT_EXCLUDED;

-      for (p = path; *p; p++) {
-        switch (*p) {
-          case '\\':
-          case ':':
-          case '?':
-          case '*':
-          case '"':
-          case '>':
-          case '<':
-          case '|':
-            return CSYNC_FILE_EXCLUDE_INVALID_CHAR;
-          default:
-            break;
-        }
+    for (p = path; *p; p++) {
+      switch (*p) {
+        case '\\':
+        case ':':
+        case '?':
+        case '*':
+        case '"':
+        case '>':
+        case '<':
+        case '|':
+          return CSYNC_FILE_EXCLUDE_INVALID_CHAR;
+        default:
+          break;
+      }
+    }
+
+  /* split up the path */
+  dname = c_dirname(path);
+  bname = c_basename(path);
+
+  if (bname == NULL || dname == NULL) {
+      match = CSYNC_NOT_EXCLUDED;
+      SAFE_FREE(bname);
+      SAFE_FREE(dname);
+      goto out;
+  }
+
+  rc = csync_fnmatch(".csync_journal.db*", bname, 0);
+  if (rc == 0) {
+      match = CSYNC_FILE_SILENTLY_EXCLUDED;
+      SAFE_FREE(bname);
+      SAFE_FREE(dname);
+      goto out;
+  }
+
+  // check the strlen and ignore the file if its name is longer than 254 chars.
+  // whenever changing this also check createDownloadTmpFileName
+  if (strlen(bname) > 254) {
+      match = CSYNC_FILE_EXCLUDE_LONG_FILENAME;
+      SAFE_FREE(bname);
+      SAFE_FREE(dname);
+      goto out;
+  }
+
+#ifdef _WIN32
+  // Windows cannot sync files ending in spaces (#2176). It also cannot
+  // distinguish files ending in '.' from files without an ending,
+  // as '.' is a separator that is not stored internally, so let's
+  // not allow to sync those to avoid file loss/ambiguities (#416)
+  size_t blen = strlen(bname);
+  if (blen > 1 && (bname[blen-1]== ' ' || bname[blen-1]== '.' )) {
+      match = CSYNC_FILE_EXCLUDE_INVALID_CHAR;
+      SAFE_FREE(bname);
+      SAFE_FREE(dname);
+      goto out;
+  }
+
+  if (csync_is_windows_reserved_word(bname)) {
+    match = CSYNC_FILE_EXCLUDE_INVALID_CHAR;
+    SAFE_FREE(bname);
+    SAFE_FREE(dname);
+    goto out;
+  }
+#endif
+
+  rc = csync_fnmatch(".owncloudsync.log*", bname, 0);
+  if (rc == 0) {
+      match = CSYNC_FILE_SILENTLY_EXCLUDED;
+      SAFE_FREE(bname);
+      SAFE_FREE(dname);
+      goto out;
+  }
+
+  /* Always ignore conflict files, not only via the exclude list */
+  rc = csync_fnmatch("*_conflict-*", bname, 0);
+  if (rc == 0) {
+      match = CSYNC_FILE_SILENTLY_EXCLUDED;
+      SAFE_FREE(bname);
+      SAFE_FREE(dname);
+      goto out;
+  }
+
+  if (getenv("CSYNC_CONFLICT_FILE_USERNAME")) {
+      rc = asprintf(&conflict, "*_conflict_%s-*", getenv("CSYNC_CONFLICT_FILE_USERNAME"));
+      if (rc < 0) {
+          SAFE_FREE(bname);
+          SAFE_FREE(dname);
+          goto out;
+      }
+      rc = csync_fnmatch(conflict, path, 0);
+      if (rc == 0) {
+          match = CSYNC_FILE_SILENTLY_EXCLUDED;
+          SAFE_FREE(conflict);
+          SAFE_FREE(bname);
+          SAFE_FREE(dname);
+          goto out;
+      }
+      SAFE_FREE(conflict);
+  }
+
+  SAFE_FREE(bname);
+  SAFE_FREE(dname);
+
+  if( ! excludes ) {
+      goto out;
+  }
+
+  /* Loop over all exclude patterns and evaluate the given path */
+  for (i = 0; match == CSYNC_NOT_EXCLUDED && i < excludes->count; i++) {
+      bool match_dirs_only = false;
+      char *pattern_stored = c_strdup(excludes->vector[i]);
+      char* pattern = pattern_stored;
+
+      type = CSYNC_FILE_EXCLUDE_LIST;
+      if (strlen(pattern) < 1) {
+	  SAFE_FREE(pattern_stored);
+          continue;
+      }
+      /* Ecludes starting with ']' means it can be cleanup */
+      if (pattern[0] == ']') {
+          ++pattern;
+          if (filetype == CSYNC_FTW_TYPE_FILE) {
+              type = CSYNC_FILE_EXCLUDE_AND_REMOVE;
+          }
+      }
+      /* Check if the pattern applies to pathes only. */
+      if (pattern[strlen(pattern)-1] == '/') {
+          match_dirs_only = true;
+          pattern[strlen(pattern)-1] = '\0'; /* Cut off the slash */
      }

-    /* split up the path */
-    bname = strrchr(path, '/');
-    if (bname) {
-        bname += 1; // don't include the /
-    } else {
-        bname = path;
-    }
-    blen = strlen(bname);
+      /* check if the pattern contains a / and if, compare to the whole path */
+      if (strchr(pattern, '/')) {
+          rc = csync_fnmatch(pattern, path, FNM_PATHNAME);
+          if( rc == 0 ) {
+              match = type;
+          }
+          /* if the pattern requires a dir, but path is not, its still not excluded. */
+          if (match_dirs_only && filetype != CSYNC_FTW_TYPE_DIR) {
+              match = CSYNC_NOT_EXCLUDED;
+          }
+      }

-    rc = csync_fnmatch(".csync_journal.db*", bname, 0);
-    if (rc == 0) {
-        match = CSYNC_FILE_SILENTLY_EXCLUDED;
-        goto out;
-    }
+      /* if still not excluded, check each component of the path */
+      if (match == CSYNC_NOT_EXCLUDED) {
+          int trailing_component = 1;
+          dname = c_dirname(path);
+          bname = c_basename(path);

-    // check the strlen and ignore the file if its name is longer than 254 chars.
-    // whenever changing this also check createDownloadTmpFileName
-    if (blen > 254) {
-        match = CSYNC_FILE_EXCLUDE_LONG_FILENAME;
-        goto out;
-    }
+          if (bname == NULL || dname == NULL) {
+              match = CSYNC_NOT_EXCLUDED;
+	      SAFE_FREE(bname);
+	      SAFE_FREE(dname);
+              SAFE_FREE(pattern_stored);
+              goto out;
+          }

-  #ifdef _WIN32
-    // Windows cannot sync files ending in spaces (#2176). It also cannot
-    // distinguish files ending in '.' from files without an ending,
-    // as '.' is a separator that is not stored internally, so let's
-    // not allow to sync those to avoid file loss/ambiguities (#416)
-    if (blen > 1 && (bname[blen-1]== ' ' || bname[blen-1]== '.' )) {
-        match = CSYNC_FILE_EXCLUDE_INVALID_CHAR;
-        goto out;
-    }
+          /* Check each component of the path */
+          do {
+              /* Do not check the bname if its a file and the pattern matches dirs only. */
+              if ( !(trailing_component == 1 /* it is the trailing component */
+                     && match_dirs_only      /* but only directories are matched by the pattern */
+                     && filetype == CSYNC_FTW_TYPE_FILE) ) {
+                  /* Check the name component against the pattern */
+                  rc = csync_fnmatch(pattern, bname, 0);
+                  if (rc == 0) {
+                      match = type;
+                  }
+              }
+              if (!(c_streq(dname, ".") || c_streq(dname, "/"))) {
+                  rc = csync_fnmatch(pattern, dname, 0);
+                  if (rc == 0) {
+                      match = type;
+                  }
+              }
+              trailing_component = 0;
+              prev_dname = dname;
+              SAFE_FREE(bname);
+              bname = c_basename(prev_dname);
+              dname = c_dirname(prev_dname);
+              SAFE_FREE(prev_dname);

-    if (csync_is_windows_reserved_word(bname)) {
-      match = CSYNC_FILE_EXCLUDE_INVALID_CHAR;
-      goto out;
-    }
-  #endif
+          } while( match == CSYNC_NOT_EXCLUDED && !c_streq(dname, ".")
+                     && !c_streq(dname, "/") );
+      }
+      SAFE_FREE(pattern_stored);
+      SAFE_FREE(bname);
+      SAFE_FREE(dname);
+  }

-    rc = csync_fnmatch(".owncloudsync.log*", bname, 0);
-    if (rc == 0) {
-        match = CSYNC_FILE_SILENTLY_EXCLUDED;
-        goto out;
-    }

-    /* Always ignore conflict files, not only via the exclude list */
-    rc = csync_fnmatch("*_conflict-*", bname, 0);
-    if (rc == 0) {
-        match = CSYNC_FILE_SILENTLY_EXCLUDED;
-        goto out;
-    }
+out:

-    if (getenv("CSYNC_CONFLICT_FILE_USERNAME")) {
-        rc = asprintf(&conflict, "*_conflict_%s-*", getenv("CSYNC_CONFLICT_FILE_USERNAME"));
-        if (rc < 0) {
-            goto out;
-        }
-        rc = csync_fnmatch(conflict, path, 0);
-        if (rc == 0) {
-            match = CSYNC_FILE_SILENTLY_EXCLUDED;
-            SAFE_FREE(conflict);
-            goto out;
-        }
-        SAFE_FREE(conflict);
-    }
-
-    if( ! excludes ) {
-        goto out;
-    }
-
-    /* Build a list of path components to check. */
-    c_strlist_t *path_components = c_strlist_new(32);
-    char *path_split = strdup(path);
-    size_t len = strlen(path_split);
-    for (i = len; ; --i) {
-        // read backwards until a path separator is found
-        if (i != 0 && path_split[i-1] != '/') {
-            continue;
-        }
-
-        // check 'basename', i.e. for "/foo/bar/fi" we'd check 'fi', 'bar', 'foo'
-        if (path_split[i] != 0) {
-            c_strlist_add_grow(&path_components, path_split + i);
-        }
-
-        if (i == 0 || !check_leading_dirs) {
-            break;
-        }
-
-        // check 'dirname', i.e. for "/foo/bar/fi" we'd check '/foo/bar', '/foo'
-        path_split[i-1] = '\0';
-        c_strlist_add_grow(&path_components, path_split);
-    }
-    SAFE_FREE(path_split);
-
-    /* Loop over all exclude patterns and evaluate the given path */
-    for (i = 0; match == CSYNC_NOT_EXCLUDED && i < excludes->count; i++) {
-        bool match_dirs_only = false;
-        char *pattern_stored = c_strdup(excludes->vector[i]);
-        char* pattern = pattern_stored;
-
-        type = CSYNC_FILE_EXCLUDE_LIST;
-        if (strlen(pattern) < 1) {
-            SAFE_FREE(pattern_stored);
-            continue;
-        }
-        /* Excludes starting with ']' means it can be cleanup */
-        if (pattern[0] == ']') {
-            ++pattern;
-            if (filetype == CSYNC_FTW_TYPE_FILE) {
-                type = CSYNC_FILE_EXCLUDE_AND_REMOVE;
-            }
-        }
-        /* Check if the pattern applies to pathes only. */
-        if (pattern[strlen(pattern)-1] == '/') {
-            match_dirs_only = true;
-            pattern[strlen(pattern)-1] = '\0'; /* Cut off the slash */
-        }
-
-        /* check if the pattern contains a / and if, compare to the whole path */
-        if (strchr(pattern, '/')) {
-            rc = csync_fnmatch(pattern, path, FNM_PATHNAME);
-            if( rc == 0 ) {
-                match = type;
-            }
-            /* if the pattern requires a dir, but path is not, its still not excluded. */
-            if (match_dirs_only && filetype != CSYNC_FTW_TYPE_DIR) {
-                match = CSYNC_NOT_EXCLUDED;
-            }
-        }
-
-        /* if still not excluded, check each component and leading directory of the path */
-        if (match == CSYNC_NOT_EXCLUDED) {
-            size_t j = 0;
-            if (match_dirs_only && filetype == CSYNC_FTW_TYPE_FILE) {
-                j = 1; // skip the first entry, which is bname
-            }
-            for (; j < path_components->count; ++j) {
-                rc = csync_fnmatch(pattern, path_components->vector[j], 0);
-                if (rc == 0) {
-                    match = type;
-                    break;
-                }
-            }
-        }
-        SAFE_FREE(pattern_stored);
-    }
-    c_strlist_destroy(path_components);
-
-  out:
-
-    return match;
-}
-
-CSYNC_EXCLUDE_TYPE csync_excluded_traversal(c_strlist_t *excludes, const char *path, int filetype) {
-  return _csync_excluded_common(excludes, path, filetype, false);
-}
-
-CSYNC_EXCLUDE_TYPE csync_excluded_no_ctx(c_strlist_t *excludes, const char *path, int filetype) {
-  return _csync_excluded_common(excludes, path, filetype, true);
+  return match;
 }

@@ -28,8 +28,7 @@ enum csync_exclude_type_e {
  CSYNC_FILE_EXCLUDE_LIST,
  CSYNC_FILE_EXCLUDE_INVALID_CHAR,
  CSYNC_FILE_EXCLUDE_LONG_FILENAME,
-  CSYNC_FILE_EXCLUDE_HIDDEN,
-  CSYNC_FILE_EXCLUDE_STAT_FAILED
+  CSYNC_FILE_EXCLUDE_HIDDEN
 };
 typedef enum csync_exclude_type_e CSYNC_EXCLUDE_TYPE;

@@ -66,11 +65,6 @@ void csync_exclude_destroy(CSYNC *ctx);
 *
 * This excludes also paths which can't be used without unix extensions.
 *
- * The exclude list is checked against the full path, each component of
- * the path and all leading directory strings, e.g.
- * '/foo/bar/file' checks ('/foo/bar/file', 'foo', 'bar', 'file',
- * '/foo/bar', '/foo').
- *
 * @param ctx   The synchronizer context.
 * @param path  The patch to check.
 *
@@ -78,23 +72,6 @@ void csync_exclude_destroy(CSYNC *ctx);
 */
 CSYNC_EXCLUDE_TYPE csync_excluded(CSYNC *ctx, const char *path, int filetype);

-/**
- * @brief Check if the given path should be excluded in a traversal situation.
- *
- * It does only part of the work that csync_excluded does because it's assumed
- * that all leading directories have been run through csync_excluded_traversal()
- * before. This can be significantly faster.
- *
- * That means for '/foo/bar/file' only ('/foo/bar/file', 'file') is checked
- * against the exclude patterns.
- *
- * @param ctx   The synchronizer context.
- * @param path  The patch to check.
- *
- * @return  2 if excluded and needs cleanup, 1 if excluded, 0 if not.
- */
-CSYNC_EXCLUDE_TYPE csync_excluded_traversal(c_strlist_t *excludes, const char *path, int filetype);
-
 /**
 * @brief csync_excluded_no_ctx
 * @param excludes
@@ -185,11 +185,11 @@ struct csync_file_stat_s {
  size_t pathlen;   /* u64 */
  uint64_t inode;   /* u64 */
  mode_t mode;      /* u32 */
-  unsigned int type                   : 4;
-  unsigned int child_modified         : 1;
-  unsigned int should_update_metadata : 1; /*specify that the etag, or the remote perm or fileid has
+  int type;         /* u32 */
+  int child_modified;/*bool*/
+  int should_update_metadata; /*bool: specify that the etag, or the remote perm or fileid has
                                changed and need to be updated on the db even for INSTRUCTION_NONE */
-  unsigned int has_ignored_files      : 1; /* specify that a directory, or child directory contains ignored files */
+  int has_ignored_files; /*bool: specify that a directory, or child directory contains ignored files */

  char *destpath;   /* for renames */
  const char *etag;
@@ -488,7 +488,7 @@ int csync_statedb_get_below_path( CSYNC *ctx, const char *path ) {
            /* Check for exclusion from the tree.
             * Note that this is only a safety net in case the ignore list changes
             * without a full remote discovery being triggered. */
-            CSYNC_EXCLUDE_TYPE excluded = csync_excluded_traversal(ctx->excludes, st->path, st->type);
+            CSYNC_EXCLUDE_TYPE excluded = csync_excluded(ctx, st->path, st->type);
            if (excluded != CSYNC_NOT_EXCLUDED) {
                CSYNC_LOG(CSYNC_LOG_PRIORITY_TRACE, "%s excluded (%d)", st->path, excluded);

@@ -163,12 +163,8 @@ static int _csync_detect_update(CSYNC *ctx, const char *file,

  len = strlen(path);

-  if (type == CSYNC_FTW_TYPE_SKIP) {
-      excluded =CSYNC_FILE_EXCLUDE_STAT_FAILED;
-  } else {
-    /* Check if file is excluded */
-    excluded = csync_excluded_traversal(ctx->excludes, path, type);
-  }
+  /* Check if file is excluded */
+  excluded = csync_excluded(ctx, path,type);

  if( excluded == CSYNC_NOT_EXCLUDED ) {
      /* Even if it is not excluded by a pattern, maybe it is to be ignored
@@ -239,6 +235,12 @@ static int _csync_detect_update(CSYNC *ctx, const char *file,
    }
  }

+  /* Ignore non statable files and other strange cases. */
+  if (type == CSYNC_FTW_TYPE_SKIP) {
+    st->instruction = CSYNC_INSTRUCTION_NONE;
+    goto out;
+  }
+
  if (excluded > CSYNC_NOT_EXCLUDED || type == CSYNC_FTW_TYPE_SLINK) {
      st->instruction = CSYNC_INSTRUCTION_IGNORE;
      if (ctx->current_fs) {
@@ -431,8 +433,6 @@ out:
              st->error_status = CSYNC_STATUS_INDIVIDUAL_EXCLUDE_LONG_FILENAME; /* File name is too long. */
          } else if (excluded == CSYNC_FILE_EXCLUDE_HIDDEN ) {
              st->error_status = CSYNC_STATUS_INDIVIDUAL_EXCLUDE_HIDDEN;
-          } else if (excluded == CSYNC_FILE_EXCLUDE_STAT_FAILED) {
-              st->error_status = CSYNC_STATUS_INDIVIDUAL_STAT_FAILED;
          }
      }
  }
@@ -630,15 +630,7 @@ int csync_ftw(CSYNC *ctx, const char *uri, csync_walker_fn fn,
      /* permission denied */
      ctx->status_code = csync_errno_to_status(errno, CSYNC_STATUS_OPENDIR_ERROR);
      if (errno == EACCES) {
-          if (ctx->current_fs) {
-              ctx->current_fs->instruction = CSYNC_INSTRUCTION_IGNORE;
-              ctx->current_fs->error_status = CSYNC_STATUS_PERMISSION_DENIED;
-              /* If a directory has ignored files, put the flag on the parent directory as well */
-              if( previous_fs ) {
-                  previous_fs->has_ignored_files = true;
-              }
-              goto done;
-          }
+          return 0;
      } else if(errno == ENOENT) {
          asp = asprintf( &ctx->error_string, "%s", uri);
          if (asp < 0) {
@@ -660,7 +652,6 @@ int csync_ftw(CSYNC *ctx, const char *uri, csync_walker_fn fn,
              }
              goto done;
          }
-          /* if current_fs is not defined here, better throw an error */
      } else {
          CSYNC_LOG(CSYNC_LOG_PRIORITY_ERROR, "opendir failed for %s - errno %d", uri, errno);
      }
@@ -393,8 +393,8 @@ int c_parse_uri(const char *uri,

 /*
 * This function takes a path and converts it to a UNC representation of the
- * string. That means that it prepends a \\?\ (unless already UNC) and converts
- * all slashes to backslashes.
+ * string. That means that it prepends a \\?\ and convertes all slashes to
+ * backslashes.
 *
 * Note the following:
 *  - The string must be absolute.
@@ -408,28 +408,27 @@ int c_parse_uri(const char *uri,
 {
     int len = 0;
     char *longStr = NULL;
+     int i = 4; // index where to start changing "/"=>"\"

     len = strlen(str);
     longStr = c_malloc(len+5);
     *longStr = '\0';

     // prepend \\?\ and convert '/' => '\' to support long names
-     if( str[0] == '/' || str[0] == '\\' ) {
-         // Don't prepend if already UNC
-         if( !(len > 1 && (str[1] == '/' || str[1] == '\\')) ) {
-            strcpy( longStr, "\\\\?");
-         }
+     if( str[0] == '/' ) {
+         strncpy( longStr, "\\\\?", 4);
+         i=3;
     } else {
-         strcpy( longStr, "\\\\?\\"); // prepend string by this four magic chars.
+         strncpy( longStr, "\\\\?\\", 5); // prepend string by this four magic chars.
     }
     strncat( longStr, str, len );

     /* replace all occurences of / with the windows native \ */
-     char *c = longStr;
-     for (; *c; ++c) {
-         if(*c == '/') {
-             *c = '\\';
+     while(longStr[i] != '\0') {
+         if(longStr[i] == '/') {
+             longStr[i] = '\\';
         }
+         i++;
     }
     return longStr;
 }
@@ -215,25 +215,6 @@ int c_strlist_add(c_strlist_t *strlist, const char *string) {
  return 0;
 }

-int c_strlist_add_grow(c_strlist_t **strlist, const char *string) {
-  if (*strlist == NULL) {
-    *strlist = c_strlist_new(32);
-    if (*strlist == NULL) {
-      return -1;
-    }
-  }
-
-  if ((*strlist)->count == (*strlist)->size) {
-    c_strlist_t *list = c_strlist_expand(*strlist, 2 * (*strlist)->size);
-    if (list == NULL) {
-      return -1;
-    }
-    *strlist = list;
-  }
-
-  return c_strlist_add(*strlist, string);
-}
-
 void c_strlist_clear(c_strlist_t *strlist) {
  size_t i = 0;

@@ -112,19 +112,6 @@ c_strlist_t *c_strlist_expand(c_strlist_t *strlist, size_t size);
 */
 int c_strlist_add(c_strlist_t *strlist, const char *string);

-/**
- * @brief  Add a string to the stringlist, growing it if necessary
- *
- * Duplicates the string and stores it in the stringlist.
- * It also initializes the stringlist if it starts out as null.
- *
- * @param strlist  Stringlist to add the string.
- * @param string   String to add.
- *
- * @return  0 on success, less than 0 and errno set if an error occured.
- */
-int c_strlist_add_grow(c_strlist_t **strlist, const char *string);
-
 /**
 * @brief Removes all strings from the list.
 *
@@ -74,12 +74,6 @@ csync_vio_handle_t *csync_vio_local_opendir(const char *name) {
  }

  if (!dirname || handle->hFind == INVALID_HANDLE_VALUE) {
-      int retcode = GetLastError();
-      if( retcode == ERROR_FILE_NOT_FOUND ) {
-          errno = ENOENT;
-      } else {
-          errno = EACCES;
-      }
      SAFE_FREE(handle);
      return NULL;
  }
@@ -105,9 +99,6 @@ int csync_vio_local_closedir(csync_vio_handle_t *dhandle) {
  // FindClose returns non-zero on success
  if( FindClose(handle->hFind) != 0 ) {
      rc = 0;
-  } else {
-      // error case, set errno
-      errno = EBADF;
  }

  SAFE_FREE(handle->path);
@@ -126,8 +117,7 @@ csync_vio_file_stat_t *csync_vio_local_readdir(csync_vio_handle_t *dhandle) {
  errno = 0;
  file_stat = csync_vio_file_stat_new();
  if (file_stat == NULL) {
-      errno = ENOMEM;
-      goto err;
+    goto err;
  }
  file_stat->fields = CSYNC_VIO_FILE_STAT_FIELDS_NONE;

@@ -189,7 +179,7 @@ int csync_vio_local_stat(const char *uri, csync_vio_file_stat_t *buf) {
    mbchar_t *wuri = c_utf8_path_to_locale( uri );

    h = CreateFileW( wuri, 0, FILE_SHARE_READ, NULL, OPEN_EXISTING,
-                     FILE_ATTRIBUTE_NORMAL+FILE_FLAG_BACKUP_SEMANTICS+FILE_FLAG_OPEN_REPARSE_POINT, NULL );
+                     FILE_ATTRIBUTE_NORMAL+FILE_FLAG_BACKUP_SEMANTICS, NULL );
    if( h == INVALID_HANDLE_VALUE ) {
        CSYNC_LOG(CSYNC_LOG_PRIORITY_CRIT, "CreateFileW failed on %s", uri );
        errno = GetLastError();
@@ -19,7 +19,6 @@
 */
 #include "config_csync.h"
 #include <string.h>
-#include <time.h>

 #include "torture.h"

@@ -90,11 +89,6 @@ static void check_csync_excluded(void **state)
    CSYNC *csync = *state;
    int rc;

-    rc = csync_excluded(csync, "", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-    rc = csync_excluded(csync, "/", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-
    rc = csync_excluded(csync, "krawel_krawel", CSYNC_FTW_TYPE_FILE);
    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
    rc = csync_excluded(csync, ".kde/share/config/kwin.eventsrc", CSYNC_FTW_TYPE_FILE);
@@ -147,56 +141,6 @@ static void check_csync_excluded(void **state)

 }

-static void check_csync_excluded_traversal(void **state)
-{
-    CSYNC *csync = *state;
-    int rc;
-
-    _csync_exclude_add( &(csync->excludes), "/exclude" );
-
-    /* Check toplevel dir, the pattern only works for toplevel dir. */
-    rc = csync_excluded_traversal(csync->excludes, "/exclude", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded_traversal(csync->excludes, "/foo/exclude", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-
-    /* check for a file called exclude. Must still work */
-    rc = csync_excluded_traversal(csync->excludes, "/exclude", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded_traversal(csync->excludes, "/foo/exclude", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-
-    /* Add an exclude for directories only: excl/ */
-    _csync_exclude_add( &(csync->excludes), "excl/" );
-    rc = csync_excluded_traversal(csync->excludes, "/excl", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded_traversal(csync->excludes, "meep/excl", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded_traversal(csync->excludes, "meep/excl/file", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED); // because leading dirs aren't checked!
-
-    rc = csync_excluded_traversal(csync->excludes, "/excl", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-
-    _csync_exclude_add(&csync->excludes, "/excludepath/withsubdir");
-
-    rc = csync_excluded_traversal(csync->excludes, "/excludepath/withsubdir", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded_traversal(csync->excludes, "/excludepath/withsubdir", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded_traversal(csync->excludes, "/excludepath/withsubdir2", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-
-    rc = csync_excluded_traversal(csync->excludes, "/excludepath/withsubdir/foo", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED); // because leading dirs aren't checked!
-}
-
 static void check_csync_pathes(void **state)
 {
    CSYNC *csync = *state;
@@ -226,25 +170,8 @@ static void check_csync_pathes(void **state)
    rc = csync_excluded(csync, "meep/excl", CSYNC_FTW_TYPE_DIR);
    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);

-    rc = csync_excluded(csync, "meep/excl/file", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
    rc = csync_excluded(csync, "/excl", CSYNC_FTW_TYPE_FILE);
    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-
-    _csync_exclude_add(&csync->excludes, "/excludepath/withsubdir");
-
-    rc = csync_excluded(csync, "/excludepath/withsubdir", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded(csync, "/excludepath/withsubdir", CSYNC_FTW_TYPE_FILE);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
-
-    rc = csync_excluded(csync, "/excludepath/withsubdir2", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_NOT_EXCLUDED);
-
-    rc = csync_excluded(csync, "/excludepath/withsubdir/foo", CSYNC_FTW_TYPE_DIR);
-    assert_int_equal(rc, CSYNC_FILE_EXCLUDE_LIST);
 }

 static void check_csync_is_windows_reserved_word() {
@@ -263,51 +190,7 @@ static void check_csync_is_windows_reserved_word() {
    assert_true(csync_is_windows_reserved_word("Z:"));
    assert_true(csync_is_windows_reserved_word("M:"));
    assert_true(csync_is_windows_reserved_word("m:"));
-}

-static void check_csync_excluded_performance(void **state)
-{
-    CSYNC *csync = *state;
-
-    const int N = 10000;
-    int totalRc = 0;
-
-    // Being able to use QElapsedTimer for measurement would be nice...
-    {
-        struct timeval before, after;
-        gettimeofday(&before, 0);
-
-        for (int i = 0; i < N; ++i) {
-            totalRc += csync_excluded(csync, "/this/is/quite/a/long/path/with/many/components", CSYNC_FTW_TYPE_DIR);
-            totalRc += csync_excluded(csync, "/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/24/25/26/27/29", CSYNC_FTW_TYPE_FILE);
-        }
-        assert_int_equal(totalRc, CSYNC_NOT_EXCLUDED); // mainly to avoid optimization
-
-        gettimeofday(&after, 0);
-
-        const double total = (after.tv_sec - before.tv_sec)
-                + (after.tv_usec - before.tv_usec) / 1.0e6;
-        const double perCallMs = total / 2 / N * 1000;
-        printf("csync_excluded: %f ms per call\n", perCallMs);
-    }
-
-    {
-        struct timeval before, after;
-        gettimeofday(&before, 0);
-
-        for (int i = 0; i < N; ++i) {
-            totalRc += csync_excluded_traversal(csync->excludes, "/this/is/quite/a/long/path/with/many/components", CSYNC_FTW_TYPE_DIR);
-            totalRc += csync_excluded_traversal(csync->excludes, "/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/24/25/26/27/29", CSYNC_FTW_TYPE_FILE);
-        }
-        assert_int_equal(totalRc, CSYNC_NOT_EXCLUDED); // mainly to avoid optimization
-
-        gettimeofday(&after, 0);
-
-        const double total = (after.tv_sec - before.tv_sec)
-                + (after.tv_usec - before.tv_usec) / 1.0e6;
-        const double perCallMs = total / 2 / N * 1000;
-        printf("csync_excluded_traversal: %f ms per call\n", perCallMs);
-    }
 }

 int torture_run_tests(void)
@@ -316,10 +199,8 @@ int torture_run_tests(void)
        unit_test_setup_teardown(check_csync_exclude_add, setup, teardown),
        unit_test_setup_teardown(check_csync_exclude_load, setup, teardown),
        unit_test_setup_teardown(check_csync_excluded, setup_init, teardown),
-        unit_test_setup_teardown(check_csync_excluded_traversal, setup_init, teardown),
        unit_test_setup_teardown(check_csync_pathes, setup_init, teardown),
        unit_test_setup_teardown(check_csync_is_windows_reserved_word, setup_init, teardown),
-        unit_test_setup_teardown(check_csync_excluded_performance, setup_init, teardown),
    };

    return run_tests(tests);
@@ -146,47 +146,13 @@ static void check_to_multibyte(void **state)

 static void check_long_win_path(void **state)
 {
+    const char *path = "C://DATA/FILES/MUSIC/MY_MUSIC.mp3"; // check a short path
+    const char *exp_path = "\\\\?\\C:\\\\DATA\\FILES\\MUSIC\\MY_MUSIC.mp3";
+    const char *new_short = c_path_to_UNC(path);
+
    (void) state; /* unused */

-    {
-        const char *path = "C://DATA/FILES/MUSIC/MY_MUSIC.mp3"; // check a short path
-        const char *exp_path = "\\\\?\\C:\\\\DATA\\FILES\\MUSIC\\MY_MUSIC.mp3";
-        const char *new_short = c_path_to_UNC(path);
-        assert_string_equal(new_short, exp_path);
-        SAFE_FREE(new_short);
-    }
-
-    {
-        const char *path = "\\\\foo\\bar/MY_MUSIC.mp3";
-        const char *exp_path = "\\\\foo\\bar\\MY_MUSIC.mp3";
-        const char *new_short = c_path_to_UNC(path);
-        assert_string_equal(new_short, exp_path);
-        SAFE_FREE(new_short);
-    }
-
-    {
-        const char *path = "//foo\\bar/MY_MUSIC.mp3";
-        const char *exp_path = "\\\\foo\\bar\\MY_MUSIC.mp3";
-        const char *new_short = c_path_to_UNC(path);
-        assert_string_equal(new_short, exp_path);
-        SAFE_FREE(new_short);
-    }
-
-    {
-        const char *path = "\\foo\\bar";
-        const char *exp_path = "\\\\?\\foo\\bar";
-        const char *new_short = c_path_to_UNC(path);
-        assert_string_equal(new_short, exp_path);
-        SAFE_FREE(new_short);
-    }
-
-    {
-        const char *path = "/foo/bar";
-        const char *exp_path = "\\\\?\\foo\\bar";
-        const char *new_short = c_path_to_UNC(path);
-        assert_string_equal(new_short, exp_path);
-        SAFE_FREE(new_short);
-    }
+    assert_string_equal(new_short, exp_path);

    const char *longPath = "D://alonglonglonglong/blonglonglonglong/clonglonglonglong/dlonglonglonglong/"
            "elonglonglonglong/flonglonglonglong/glonglonglonglong/hlonglonglonglong/ilonglonglonglong/"
@@ -204,7 +170,7 @@ static void check_long_win_path(void **state)

    // printf( "YYYYYYYYYYYY %ld\n", strlen(new_long));
    assert_int_equal( strlen(new_long), 286);
-    SAFE_FREE(new_long);
+
 }

 int torture_run_tests(void)
@@ -47,7 +47,7 @@ Synchronization by Time versus ETag
 .. index:: time stamps, file times, etag, unique id

 Until the release of ownCloud 4.5 and ownCloud Client 1.1, the ownCloud
-synchronization process employed a single file property -- the file modification
+synchronization process employed a single file property -- the file modificatin
 time -- to decide which file was newer and needed to be synchronized to the
 other repository.

@@ -76,7 +76,7 @@ a synchronization process.
   not support using the file ID functionality.

 Before the 1.3.0 release of the Desktop Client, the synchronization process
-might create false conflict files if time deviates. Original and changed files
+might create faux conflict files if time deviates. Original and changed files
 conflict only in their timestamp, but not in their content. This behaviour was
 changed to employ a binary check if files differ.

@@ -104,11 +104,11 @@ depending on server/client combination:
 +--------------------+-------------------+----------------------------+

 We strongly recommend using ownCloud Server release 4.5 or later when using
-ownCloud Client 1.1 or later. Using an incompatible time stamp-based
+ownCloud Client 1.1 or later. Using incompatible time stamp-based
 synchronization mechanism can lead to data loss in rare cases, especially when
 multiple clients are involved and one utilizes a non-synchronized NTP time.

-.. _`NTP time synchronization`: http://en.wikipedia.org/wiki/Network_Time_Protocol
+.. _`NTP time synchronisation`: http://en.wikipedia.org/wiki/Network_Time_Protocol
 .. _Etag: http://en.wikipedia.org/wiki/HTTP_ETag

 Comparison and Conflict Cases
@@ -120,7 +120,7 @@ traverses the file tree and compares the modification time of each file with an
 expected value stored in its database. If the value is not the same, the client
 determines that the file has been modified in the local repository.

-.. note:: On the local side, the modification time is a good attribute to use for 
+.. note:: On the local side, the modification time a good attribute to use for 
   detecting changes, because
   the value does not depend on time shifts and such.

@@ -131,8 +131,8 @@ changed and no synchronization occurs.

 In the event a file has changed on both the local and the remote repository
 since the last sync run, it can not easily be decided which version of the file
-is the one that should be used. However, changes to any side will not be lost.  Instead,
-a *conflict case* is created. The client resolves this conflict by creating a
+is the one that should be used. However, changes to any side be lost.  Instead,
+a *conflict case* is created. The client resolves this conflic by creating a
 conflict file of the older of the two files and saving the newer file under the
 original file name. Conflict files are always created on the client and never
 on the server. The conflict file uses the same name as the original file, but
@@ -156,18 +156,18 @@ By default, the ownCloud Client ignores the following files:
 * Files starting with ``.csync_journal.db``, as these files are reserved for journalling.

 If a pattern selected using a checkbox in the `ignoredFilesEditor-label` (or if
-a line in the exclude file starts with the character ``]`` directly followed by
+a line in the exclude file starts with the character `]` directly followed by
 the file pattern), files matching the pattern are considered *fleeting meta
-data*. These files are ignored and *removed* by the client if found in the
+data*. These files are ingored and *removed* by the client if found in the
 synchronized folder. This is suitable for meta files created by some
 applications that have no sustainable meaning.

-If a pattern ends with the forwardslash (``/``) character, only directories are
+If a pattern ends with the backslash (`/`) character, only directories are
 matched. The pattern is only applied for directory components of filenames
 selected using the checkbox.

 To match filenames against the exclude patterns, the unix standard C library
-function fnmatch is used. This process checks the filename against the
+function fnmatch is used. This procesx checks the filename against the
 specified pattern using standard shell wildcard pattern matching. For more
 information, please refer to `The opengroup website
 <http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_13_01>`_.
@@ -11,8 +11,8 @@ the Updater will check for updates and notify you when a new version is
 available.

 .. note:: Because of various technical issues, desktop sync clients older than 
-   1.7 will not be allowed to connect and sync with the ownCloud 8.1+ server. It 
-   is highly recommended to keep your client updated.
+   1.7 will not be allowed to connect and sync with the ownCloud 8.1 server. It is 
+   highly recommended to keep your client updated.

 Basic Workflow
 --------------
@@ -73,8 +73,8 @@ To prevent automatic updates, but allow manual overrides:

 1. Edit these Registry keys:

-    a. (32-bit-Windows) ``HKEY_LOCAL_MACHINE\Software\ownCloud\ownCloud``
-    b. (64-bit-Windows) ``HKEY_LOCAL_MACHINE\Software\Wow6432Node\ownCloud\ownCloud``
+    a. (32-bit) ``HKEY_LOCAL_MACHINE\Software\ownCloud\ownCloud``
+    b. (64-bit) ``HKEY_LOCAL_MACHINE\Software\Wow6432Node\ownCloud\ownCloud``

 2. Add the key ``skipUpdateCheck`` (of type DWORD).

@@ -87,9 +87,9 @@ To prevent automatic updates and disallow manual overrides:
 .. note::This is the preferred method of controlling the updater behavior using 
   Group Policies.

-1. Edit this Registry key:
+1. Migrate to the following directory::

-    ``HKEY_LOCAL_MACHINE\Software\Policies\ownCloud\ownCloud``
+	HKEY_LOCAL_MACHINE\Software\Policies\ownCloud\ownCloud

 2. Add the key ``skipUpdateCheck`` (of type DWORD).

@@ -106,7 +106,7 @@ using the system-wide ``.plist`` file.  To access this file:

 	/Library/Preferences/

-2. Locate and open the following file::
+ 2. Locate and open the following file::

 	com.owncloud.desktopclient.plist

@@ -1,6 +1,5 @@
 .. _building-label:

-===============================
 Appendix A: Building the Client
 ===============================

@@ -8,7 +7,7 @@ This section explains how to build the ownCloud Client from source for all
 major platforms. You should read this section if you want to develop for the
 desktop client.

-.. note:: Build instructions are subject to change as development proceeds.
+.. note:: Building instruction are subject to change as development proceeds.
  Please check the version for which you want to build.

 The instructions contained in this topic were updated to work with version 1.7 of the ownCloud Client.
@@ -24,7 +23,7 @@ Linux
   * openSUSE: ``zypper ref; zypper si -d owncloud-client``
   * Fedora/CentOS: ``yum install yum-utils; yum-builddep owncloud-client``

-3. Follow the :ref:`generic-build-instructions`.
+3. Follow the `generic build instructions`_.

 4. (Optional) Call ``make install`` to install the client to the ``/usr/local/bin`` directory.

@@ -44,7 +43,7 @@ The tested and preferred way to develop in this environment is through the use
 of HomeBrew_. The ownCloud team has its own repository containing non-standard
 recipes.

-To set up your build environment for development using HomeBrew_:
+To set up your build enviroment for development using HomeBrew_:

 1. Add the ownCloud repository using the following command::

@@ -61,7 +60,7 @@ To set up your build environment for development using HomeBrew_:
   Where ``x.z`` is the current version of Qt 5 that brew has installed
   on your machine.

-5. For compilation of the client, follow the :ref:`generic-build-instructions`.
+5. For compilation of the client, follow the `generic build instructions`_.

 6. In the build directory, run ``admin/osx/create_mac.sh <build_dir>
   <install_dir>``. If you have a developer signing certificate, you can specify
@@ -119,14 +118,14 @@ follow `Windows Installer Build (Cross-Compile)`_ instead.
    cmake -G "MinGW Makefiles" ../client
    mingw32-make

-  .. note:: You can try using ninja to build in parallel using
+  .. note:: You can try using ninja to build parallelly using
     ``cmake -G Ninja ../client`` and ``ninja`` instead.
-  .. note:: Refer to the :ref:`generic-build-instructions` section for additional options.
+  .. note:: Refer to the `generic build instructions`_ section for additional options.

-  The ownCloud binary will appear in the ``bin`` directory.
+  The owncloud binary will appear in the ``bin`` directory.

 Windows Installer Build (Cross-Compile)
---------------------------------------
+-----------------------

 Due to the large number of dependencies, building the client installer for Windows
 is **currently only officially supported on openSUSE**, by using the MinGW cross compiler.
@@ -135,38 +134,58 @@ have it installed already.

 To cross-compile:

-1. Add the following repository using YaST or ``zypper ar`` (adjust when using another openSUSE version)::
+1. Add the following repositories using YaST or ``zypper ar`` (adjust when using another openSUSE version)::

-    zypper ar https://build.opensuse.org/project/show/isv:ownCloud:toolchains:mingw:win32:stable
+    zypper ar http://download.opensuse.org/repositories/windows:/mingw/openSUSE_13.2/windows:mingw.repo
+    zypper ar http://download.opensuse.org/repositories/windows:/mingw:/win32/openSUSE_13.2/windows:mingw:win32.repo

 2. Install the cross-compiler packages and the cross-compiled dependencies::

-   zypper install cmake make mingw32-cross-binutils mingw32-cross-cpp mingw32-cross-gcc \
-                mingw32-cross-gcc-c++ mingw32-cross-pkg-config mingw32-filesystem \
-                mingw32-headers mingw32-runtime site-config mingw32-libwebp \
-                mingw32-cross-libqt5-qmake mingw32-cross-libqt5-qttools mingw32-libqt5*
+    zypper install cmake make mingw32-cross-binutils mingw32-cross-cpp mingw32-cross-gcc \
+                      mingw32-cross-gcc-c++ mingw32-cross-pkg-config mingw32-filesystem \
+                      mingw32-headers mingw32-runtime site-config \
+                      mingw32-cross-libqt5-qmake mingw32-cross-libqt5-qttools mingw32-libqt5* \
+                      mingw32-cross-nsis

 3. For the installer, install the NSIS installer package::

-    zypper install mingw32-cross-nsis mingw32-cross-nsis-plugin-uac mingw32-cross-nsis-plugin-nsprocess
+    zypper install mingw32-cross-nsis

-4. Follow the :ref:`generic-build-instructions`
+4. Install the following plugin::
+
+    mingw32-cross-nsis-plugin-processes mingw32-cross-nsis-plugin-uac
+
+  .. note:: This plugin is typically required.  However, due to a current bug
+     in ``mingw``, the plugins do not currently build properly from source.
+
+5. Manually download and install the following files using ``rpm -ivh <package>``:
+
+  .. note:: These files also work for more recent openSUSE versions!
+
+  ::
+    # RPM depends on curl for installs from HTTP
+    zypper install curl
+
+    rpm -ivh http://download.tomahawk-player.org/packman/mingw:32/openSUSE_12.1/x86_64/mingw32-cross-nsis-plugin-processes-0-1.1.x86_64.rpm
+    rpm -ivh http://download.tomahawk-player.org/packman/mingw:32/openSUSE_12.1/x86_64/mingw32-cross-nsis-plugin-uac-0-3.1.x86_64.rpm
+
+6. Follow the `generic build instructions`_

 .. note:: When building for Windows platforms, you must specify a special
     toolchain file that enables cmake to locate the platform-specific tools. To add
     this parameter to the call to cmake, enter
     ``-DCMAKE_TOOLCHAIN_FILE=../client/admin/win/Toolchain-mingw32-openSUSE.cmake``.

-5. Build by running ``make``.
+7. Build by running ``make``.

 .. note:: Using ``make package`` produces an NSIS-based installer, provided
    the NSIS mingw32 packages are installed.

-6. If you want to sign the installer, acquire a `Microsoft Authenticode`_ Certificate and install ``osslsigncode`` to sign the installer::
+8. If you want to sign the installer, acquire a `Microsoft Authenticode`_ Certificate and install ``osslsigncode`` to sign the installer::

    zypper install osslsigncode

-7. Sign the package::
+9. Sign the package::

    osslsigncode -pkcs12 $HOME/.codesign/packages.pfx -h sha1 \
               -pass yourpass \
@@ -176,12 +195,11 @@ To cross-compile:
               -in ${unsigned_file} \
               -out ${installer_file}

-   for ``-in``, use the URL to the time stamping server provided by your CA along with the Authenticode certificate. Alternatively,
+   for ``-in``, use URL to the time stamping server provided by your CA along with the Authenticode certificate. Alternatively,
   you may use the official Microsoft ``signtool`` utility on Microsoft Windows.


-.. _generic-build-instructions:
-
+.. _`generic build instructions`:
 Generic Build Instructions
 --------------------------

@@ -48,9 +48,9 @@ copyright = u'2013, The ownCloud developers'
 # built documents.
 #
 # The short X.Y version.
-version = '@MIRALL_VERSION_MAJOR@.@MIRALL_VERSION_MINOR@'
+version = '@VERSION_MAJOR@.@VERSION_MINOR@'
 # The full version, including alpha/beta/rc tags.
-release = '@MIRALL_VERSION@'
+release = '@VERSION@'

 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
@@ -189,7 +189,7 @@ latex_documents = [

 # The name of an image file (relative to this directory) to place at the top of
 # the title page.
-latex_logo = '@LATEX_LOGO@'
+#latex_logo = None

 # For "manual" documents, if this is true, then toplevel headings are parts,
 # not chapters.
@@ -1,4 +1,4 @@
-The ownCloud Client reads a configuration file.  You can locate this configuration file as follows:
+The ownCloud Client reads a configuration file.  You can locate this configuration files as follows:

 On Linux distributions:
        ``$HOME/.local/share/data/ownCloud/owncloud.cfg``
@@ -9,9 +9,9 @@ Some files are continuously uploaded to the server, even when they are not modif

 It is possible that another program is changing the modification date of the file.

-If the file is uses the ``.eml`` extension, Windows automatically and
+If the file is uses the ``.eml`` extention, Windows automatically and
 continually changes all files, unless you remove
-``\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\PropertySystem\PropertyHandlers``
+``\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\PropertySystem\PropertyHandlers`
 from the windows registry.

 See http://petersteier.wordpress.com/2011/10/22/windows-indexer-changes-modification-dates-of-eml-files/ for more information.
@@ -16,4 +16,5 @@ ownCloud Desktop Client Manual
   architecture
   troubleshooting
   faq
-   glossary
+   glossary 
+
@@ -3,8 +3,7 @@ Installing the Desktop Synchronization Client
 =============================================

 You can download the  latest version of the ownCloud Desktop Synchronization 
-Client from the `ownCloud download page 
-<https://owncloud.org/install/#desktop>`_. 
+Client from the `ownCloud Website <https://owncloud.org/install/#desktop>`_. 
 There are clients for Linux, Mac OS X, and Microsoft Windows.

 Installation on Mac OS X and Windows is the same as for any software 
@@ -17,45 +16,92 @@ Linux users must follow the instructions on the download page to add the
 appropriate repository for their Linux distribution, install the signing key, 
 and then use their package managers to install the desktop sync client. Linux 
 users will also update their sync clients via package manager, and the client 
-will display a notification when an update is available. 
+will display a notification when an update is available.

 Linux users must also have a password manager enabled, such as GNOME Keyring or
 KWallet, so that the sync client can login automatically.

-You will also find links to source code archives and older versions on the 
-download page.
+Improvements and New Features
+-----------------------------

-Installation Wizard
-------------------
+The 1.8 client has a number of enhancements and performance improvements, 
+including:
+
+* Graphical selective sync file and folder selector. Select which files and 
+  folders to sync with just a few clicks.
+* Selective sync on account setup. Set up which files and folders you want to 
+  sync when you create a new ownCloud account.
+* File manager integration: share files from Windows Explorer, Mac OS X Finder, 
+  and Nautilus on Linux.
+* Faster uploads and downloads.
+
+.. note:: When you upgrade from 1.7, restart Windows to ensure that all new 
+   features are visible.
+
+Installation
+------------

 The installation wizard takes you step-by-step through configuration options and 
-account setup. First you need to enter the URL of your ownCloud server.
+account setup. These examples are on Windows 7; note the new "Integration for 
+Windows Explorer Option". This allows Windows users to share files directly 
+from their local ownCloud folder in Windows Explorer, rather than having to 
+open a Web browser and share from the ownCloud Web interface. Mac users get the 
+same option for Finder, and Linux users for Nautilus. 

-.. image:: images/client-1.png
-   :alt: form for entering ownCloud server URL
-   
-Enter your ownCloud login on the next screen.
+.. image:: images/client1.png

-.. image:: images/client-2.png
-   :alt: form for entering your ownCloud login
+The next screen selects the installation folder for the client. The default is 
+fine; don't change this without a good reason.

-On the Local Folder Option screen you may sync 
-all of your files on the ownCloud server, or select individual folders. The 
-default local sync folder is ``ownCloud``, in your home directory. You may 
-change this as well.
+.. image:: images/client2.png

-.. image:: images/client-3.png
-   :alt: Select which remote folders to sync, and which local folder to store 
-    them in.
-   
-When you have completed selecting your sync folders, click the Connect button 
-at the bottom right. The client will attempt to connect to your ownCloud 
-server, and when it is successful you'll see two buttons: one to connect to 
-your ownCloud Web GUI, and one to open your local folder. It will also start 
-synchronizing your files.
+In the next screen, enter your ownCloud server URL.

-.. image:: images/client-4.png
-   :alt: A successful server connection, showing a button to connect to your 
-    Web GUI, and one to open your local ownCloud folder
+.. image:: images/client3.png

-Click the Finish button, and you're all done. 
+If your ownCloud server has a self-signed SSL certificate, you will see a scary 
+warning. Check "Trust this certificate" and keep going.
+
+.. image:: images/client4.png
+
+On the next screen enter your ownCloud login and password.
+
+.. image:: images/client5.png
+
+Now you can select while folders and files to sync, and the location of your 
+local ownCloud folder.
+
+.. image:: images/client6.png
+
+When you check "Choose what to sync" it opens a file picker. Note the warning 
+at the top that unchecked folders will be removed from your local filesystem. 
+On a new installation, when you have not yet synced with your ownCloud server, 
+no files will be deleted.
+
+.. image:: images/client7.png
+
+In the next screen you may click to open ownCloud in a Web browser, or open 
+your local ownCloud folder. Open your local ownCloud folder so you can see how 
+file manager integration works.
+
+.. image:: images/client8.png
+
+When you are in your local ownCloud folder you can right-click any file or 
+folder, and then left-click "Share with ownCloud" to create a share link. Note that Windows
+may also have a Share With option. This is not the ownCloud Share option. The 
+ownCloud share dialog looks like the following example:
+
+.. image:: images/client9.png
+
+You have the same options for creating a link share as you do when you're 
+logged into the ownCloud Web GUI: you may optionally set a password and 
+expiration date.
+
+.. image:: images/client10.png
+
+You may change your sync options at any time by opening your ownCloud client 
+and clicking the "Choose what to sync" button. This opens the same file picker 
+you saw in the installation wizard. If you un-check any folders or files that 
+you have already synchronized they will be deleted.
+
+.. image:: images/client11.png
@@ -1,4 +1,3 @@
-============
 Introduction
 ============

@@ -13,43 +12,5 @@ Your files are always automatically synchronized between your ownCloud server
 and local PC.

 .. note:: Because of various technical issues, desktop sync clients older than 
-   1.7 will not allowed to connect and sync with the ownCloud 8.1+ server. It 
-   is highly recommended to keep your client updated.
-   
-Improvements and New Features
-----------------------------
-
-The 2.0 release of the ownCloud desktop sync client has many new features and 
-improvements. (See the `complete changelog 
-<https://owncloud.org/changelog/desktop/>`_.)
-
-  * Multi-account support
-  * Many UI improvements
-  * Accessibility improvements (high contrast schemes)
-  * Automatic bandwidth throttling
-  * No redundant directory entries in activity log
-  * Remove deleted accounts properly from toolbar
-  * File manager integration: show hidden files as ignored
-  * Do not sync new big folders from server without user's consent
-  * Integrate selective sync into the default UI
-  * More reliable reconnect after timeout
-  * Improve progress reporting during sync
-  * Sharing: Do not allow sharing the root folder
-  * Sharing: Show thumbnail
-  * Client Updater: Check for updates periodically, not only once per run
-  * Quota: Only refresh from server when UI is shown
-  * SSL Button: Show more information
-  * System proxy: Ask user for credentials if needed
-  * Several fixes and performance improvements in the sync engine
-  * OS X: Show file name in UI if file has invalid UTF-8 in file name 
-  * OS X: Support native finder integration for 10.10 Yosemite  
-  * Network: Try to use SSL session tickets/identifiers
-  * Windows: Support paths >255 characters
-  * Windows, OS X: Allow to not sync hidden files
-  * Windows: Remove misleading option to remove sync data
-  * Windows: Do not provoke Active Directory account locking if password changes
-  * Windows: Fix installer when installing unprivileged
-
-.. note:: When you upgrade from 1.8, restart Windows to ensure that all new 
-   features are visible.
-   
+   1.7 will not allowed to connect and sync with the ownCloud 8.1 server. It is 
+   highly recommended to keep your client updated.
@@ -1,4 +1,3 @@
-================================
 Using the Synchronization Client
 ================================

@@ -9,158 +8,275 @@ in the system tray (Windows, KDE), status bar (Mac OS X), or notification area
 (Linux).

 .. image:: images/icon.png
-   :alt: Status icon, little cloud with green circle and white checkmark 

 The status indicator uses overlay icons to indicate the current status of your 
 synchronization. The green circle with the white checkmark tells you that your 
 synchronization is current and you are connected to your ownCloud server.

 .. image:: images/icon-syncing.png
-   :alt: Status icon, little cloud with blue circle and white semi-circles

 The blue icon with the white semi-circles means synchronization is in progress.

 .. image:: images/icon-paused.png
-   :alt: Status icon, little cloud with yellow circle and vertical parallel 
-    lines

 The yellow overlay icon with the parallel lines tells you your synchronization 
-has been paused. (Most likely by you.)
+has been paused. (Most likely by you, by opening the client and clicking 
+Account > Pause.)

 .. image:: images/icon-offline.png
-   :alt: Status icon, little gray cloud with gray circle and three horizontal 
-    white dots

 The gray icon with three white dots means your sync client has lost its 
 connection with your ownCloud server.

 .. image:: images/icon-information.png
-   :alt: Status icon, little cloud with letter "i" in white circle

 When you see a white circle with the letter "i" that is the informational icon, 
 so you should click it to see what it has to tell you.

 .. image:: images/icon-error.png
-   :alt: Status icon, little cloud with red circle and white x

 The red circle with the white "x" indicates a configuration error, such as an 
 incorrect login or server URL.

-Using the Right-Click Menu
--------------------------
+Using the Desktop Client Menu
+-----------------------------

-A right-click on the icon opens a menu for quick access to multiple operations.
+A right-click on the icon opens the following menu:

 .. image:: images/menu.png
-   :alt: the right-click sync client menu
+
+**ownCloud Desktop Client menu**

 The Desktop Client menu provides the following options:

-* Open ownCloud in browser
-* Open folder [your local sync folder]
-* Up to date
-* Recent changes
-* Settings
-* Help
-* Log out
-* Quit ownCloud
+* ``Open ownCloud in browser``: Launches the ownCloud Web interface.
+* ``Open folder 'ownCloud'``: Opens your local ownCloud folder. If you have 
+    defined multiple synchronization targets, the window displays each local 
+    folder.
+* **Disk space indicator**: Indicates the amount of space currently used on the 
+  server.
+* **Operation indicator**: Displays the status of the current synchronization 
+  process or indicates ``Up to date`` if the server and client are in sync.
+* **Recent Changes**: Displays the last six files modified, and shows the 
+  current synchronization status listing all changes since the last restart of the 
+  ownCloud client.
+* ``Settings...``: The settings menu.
+* ``Help``: Opens a browser to display ownCloud Desktop Client Guide.
+* ``Sign out``: Stops synchronization.
+* ``Quit ownCloud``: Quits the ownCloud Client, ending any currently running
+  synchronizations.

 Using the Account Settings Window
 ---------------------------------

 .. index:: account settings, user, password, Server URL

-Click **Settings** in the right-click menu to see a summary of your ownCloud 
-account settings, or left-click your systray icon. This shows which ownCloud 
-account you are connected to (or accounts, if you have more than one) your 
-quota status, and a window for managing your synchronization settings.
+The ``Account`` window provides a summary for your ownCloud account settings.  
+You can manage which folders and files you want to synchronize, change your 
+account settings, and pause and resume synchronization.

-.. image:: images/client6.png
-   :alt: Account settings window
+To access and modify the account settings:

-At the top of the window are tabs for each configured sync account, and three 
-others for Activity, General and Network settings. On your account tabs you 
-have the following features:
+.. image:: images/settings_account.png
+   :scale: 50 %

-* Connection status, showing which ownCloud server you are connected to, and 
-  your ownCloud username.
-* A **Remove Account** button, which deletes your account but does not delete 
-  your data files.
-* Used and available space on the server.
-* Current synchronization status.
-* **Add Folder Sync Connection** button, which is active only when you have 
-  removed synchronization on an account (see **Remove Sync** below).
+The fields and options in this window include:

-The little button with three dots that sits to the right of the sync status bar 
-offers four additional options:
+* ``Connected to <ownCloud instance> as <user>`` field:  Your user account on an ownCloud 
+  server.

-* Open Folder
-* Choose What to Sync
-* Pause Sync / Resume Sync
-* Remove Sync
+* ``Add Folder...`` button: Add another folder to the 
+  synchronization process (see ``Adding a Folder``).

-**Open Folder** opens a file explorer window displaying the client-side folder
-that is being synced.
+* ``Pause/Resume`` button: Pauses the current sync (or prevents the client from 
+  starting a new sync), or resumes the sync process.

-**Choose What to Sync** opens the folder sync tree view. From there you can
-choose to sync all or only some of the folders in the folder tree.
+* ``Remove`` button: Removes the selected folder from the sync process.  This 
+  button is used when you want to synchronize only a few folders and not the 
+  root folder. 

-**Pause Sync** pauses sync operations for just this folder sync connection
-without making any changes to your account.
-**Resume Sync** resumes sync operations for this folder sync connection.
+* ``Storage Usage`` field: Displays how much space your files are using on the 
+   ownCloud server.

-**Remove Sync** removes this folder sync connection without removing the
-account. If you want to synchronize the folder tree again then click the
-**Add Folder Sync Connection** button, and re-select the folder tree that
-you want to sync.
+* ``Edit Ignored Files`` button: Launches the Ignored Files Editor.

-.. image:: images/client-7.png
-   :alt: Extra options for sync operations
+* ``Modify Account`` button: Use this to change your ownCloud server settings 
+  by launching the account setup wizard (see :doc:`accountsetup`).
+* ``Modify Account`` button: Use this to change your ownCloud server settings 
+  by launching the account setup wizard (see :doc:`accountsetup`).

-The Activity window contains the log of your recent activities, including files 
-downloaded and deleted, and which local folders your files went into.
+Adding a Folder
+^^^^^^^^^^^^^^^

-The General window has configuration options such as **Launch on System 
-Startup**, **Use Monochrome Icons**, and **Show Desktop Notifications**. This 
-is where you will find the **Edit Ignored Files** button, to launch the ignored 
-files editor, and two new features: **Ask confirmation before downloading 
-folders larger than [folder size]**, and **Add an Account**. 
+The ``Add Folder ...`` button enables you to add a new local folder to the 
+synchronization process.

-Multi-Account Support
---------------------
+To add a new folder:

-You may now configure multiple ownCloud accounts in your desktop sync client. 
-Simply click the **Add an Account** button on the General tab, and follow the 
-account creation wizard. The new account will appear as a new tab in the 
-settings dialog, where you can adjust its settings at any time.
+1. Click the ``Add a Folder ...`` button in the Account window.
+
+  The ``Add Folder...`` window opens
+
+.. image:: images/folderwizard_local.png
+
+2. Type a *unique* path and alias name to the folder, or use the ``Choose...`` 
+   button to open a graphical file picker.
+
+.. note:: Nested synchronizations are not supported.  You
+    cannot add a folder that is already contained within another synchronized
+    folder. In addition, you cannot add a higher level (parent) folder that
+    contains a folder to which you are already synchronizing.  By default, the
+    ownCloud Set Up Wizard synchronizes your entire ownCloud account to the root
+    folder of the ownCloud server. If you wish to sync certain specific folders and not 
+    the entire root, you must first remove the root folder.
+
+3. Click 'Next' to continue.
+
+  A window opens prompting you to select a remote destination folder on the
+  ownCloud server to synchronize.
+
+.. image:: images/folderwizard_remote.png
+
+4. Select a folder on the ownCloud server to which you want to synchronize your 
+   newly added local folder.
+
+.. note:: A server folder can only be synchronized with a particular client 
+  once. If you attempt to sync the root directory, you cannot sync with 
+  other folders on the server. Similarly, if you sync with folder ``/a``, you 
+  cannot create another sync with ``/a/b``, since ``b`` is already being 
+  synched.

 Editing Ignored Files
---------------------
+^^^^^^^^^^^^^^^^^^^^^

-The Ignored Files Editor can be opened by clicking on the button in the General 
-tab of the settings dialog. The settings apply to all configured accounts. The 
-:guilabel:`Ignored Files Editor` provides a list of  files that are ignored 
+The :guilabel:`Ignored Files Editor` provides a list of  files that are ignored 
 (that is, not synchronized) by the client and server during synchronizations. 
 You may add additional files or directories that you want to exclude from the 
 synchronization process. In addition to using standard characters, the Ignored 
 Files Editor enables you to use wild cards (for example, using an asterisk ‘*’ 
 to indicate multiple characters or a question mark ‘?’ to indicate a single 
-character). 
+character).

 For additional information see `Using the Ignored Files 
 Editor`_

-Using the Network Window
------------------------
+Using the Activity Settings Window
+----------------------------------
+
+.. index:: activity, recent changes, sync activity
+
+The Activity window provides an in-depth account of recent synchronization activity.  It 
+shows files that have not been synchronized because they are on the ignored files list, 
+or 
+because they cannot be synced due to containing special characters that cannot be stored 
+on certain file systems.
+
+.. image:: images/settings_activity.png
+
+You can open the Activity window in one of the following ways:
+
+- Click 'Activity' in the left frame of the ownCloud Settings window.
+
+- Invoke the window from the ownCloud Desktop Client menu by selecting ``Recent
+  Changes`` > ``Details...``.  (See Using the Desktop Client Menu.) 
+
+Using the General Settings Window
+---------------------------------
+
+.. index:: general settings, auto start, startup, desktop notifications
+
+The General settings window has options for launching the client at system 
+startup, notifications, and using monochrome icons.
+
+.. image:: images/settings_general.png
+
+* ``Launch on System Startup`` checkbox: Provides the option to check (enable)
+  or uncheck (disable) whether the ownCloud Desktop Client launches at system
+  startup.  By default, this option is enabled (checked) after you have configured
+  your account.
+
+* ``Show Desktop Nofications`` checkbox: Provides the option to check (enable)
+  or uncheck (disable) notifications about sync activity.
+
+* ``Use Monochrome Icons`` checkbox: Provides the option to check (enable) or
+   uncheck (disable) the use of monochrome (visually less obtrusive) icons.
+
+.. note:: This option can be useful on Mac OS X platforms.
+
+* ``About`` field: Provides information about the software authors along with
+  pertinent build conditions.
+
+.. note:: Information in this field can be valuable when submitting a support 
+   request.
+
+* ``Updates`` field: Notifies you of any available updates for the ownCloud Desktop 
+  Client.
+
+Using the Network Settings Window
+---------------------------------

 .. index:: proxy settings, SOCKS, bandwith, throttling, limiting

-The Network settings window enables you to define network proxy settings, and 
-also to limit download and upload bandwidth. New to version 2.0 is the option 
-for automatic bandwidth limits.
+The Network settings window enables you to define network proxy settings, and also to 
+limit download and upload bandwidth.

 .. image:: images/settings_network.png

+Specifying Proxy Settings
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* ``No Proxy`` option: Do not use a proxy.
+
+* ``Use system proxy`` option: Default setting. Follows the systems proxy
+  settings.
+
+* ``Specify proxy manually as`` option: Enables you to specify
+  the following custom proxy settings:
+
+  - ``HTTP(S)``: Used when you are required to use an HTTP(S) proxy server (for 
+  example, Squid or Microsoft Forefront TMG). 
+  
+  - ``SOCKSv5``: Typically used in special company LAN setups, or in 
+  combination with the OpenSSH dynamic application level forwarding feature 
+  (see ``ssh -D``).
+  
+  - ``Host``: Host name or IP address of the proxy server along with the port 
+  number. HTTP proxies typically listen over Ports 8080 (default) or 3128. 
+  SOCKS servers typically listen over port 1080.
+
+* ``Proxy Server requires authentication`` checkbox: Provides the option to 
+  check (enable/require) or uncheck (disable/not require) proxy server 
+  authentication. When not checked, the proxy server must be configured to 
+  allow anonymous usage. When checked, a proxy server username and password is 
+  required.
+
+Bandwidth Limiting
+^^^^^^^^^^^^^^^^^^
+
+Synchronization of files between a client and server can use a lot of
+bandwidth, so you can limit how much your ownCloud sync client uses.
+
+- ``No limit`` option: The default setting for the client; specifies that there
+  are no limit settings on the amount of data downloaded from the server. 
+
+- ``Limit to <value> KBytes/s`` option: Limits (throttles) the bandwidth to
+  a customized value (in KBytes/second).
+
+The Upload Bandwidth field (for data flowing from the ownCloud client to the
+server) provides the following options:
+
+- ``No limit`` option: The default setting for the client; specifies that there
+  are no limit settings on the amount of data downloaded from the server. 
+
+- ``Limit automatically``: When enabled, the ownCloud client surrenders
+  available bandwidth to other applications.  Use this option if there are
+  issues with real time communication (for example, the use of IP phone or live
+  streaming) in conjunction with the ownCloud Client.
+
+- ``Limit to <value> KBytes/s`` option: Limits (throttles) the bandwidth to a
+  customized value (in KBytes/second).
+
+
 .. _ignoredFilesEditor-label:

 Using the Ignored Files Editor
@@ -174,13 +290,13 @@ can use the *Ignored Files Editor*.

 .. image:: images/ignored_files_editor.png

-For your convenience, the editor is pre-populated with a default list of typical 
-ignore patterns. These patterns are contained in a system file (typically 
-``sync-exclude.lst``) located in the ownCloud Client application directory. You 
-cannot modify these pre-populated patterns directly from the editor. However, if 
-necessary, you can hover over any pattern in the list to show the path and 
-filename associated with that pattern, locate the file, and edit the 
-``sync-exclude.lst`` file.
+For your convenience, the editor is
+pre-populated with a default list of typical ignore patterns. These patterns
+are contained in a system file (typically ``sync-exclude.lst``) located in the
+ownCloud Client application directory. You cannot modify these pre-populated
+patterns directly from the editor. However, if necessary, you can hover over
+any pattern in the list to show the path and filename associated with that
+pattern, locate the file, and edit the ``sync-exclude.lst`` file.

 .. note:: Modifying the global exclude definition file might render the client
   unusable or result in undesired behavior.
@@ -196,8 +312,7 @@ components of the path being checked.

 .. note:: Custom entries are currently not validated for syntactical
   correctness by the editor, so you will not see any warnings for bad
-   syntax. If your synchronization does not work as you expected, check your 
-   syntax.
+   syntax. If your synchronization does not work as you expected, check your syntax.

 Each pattern string in the list is preceded by a checkbox. When the check box
 contains a check mark, in addition to ignoring the file or directory component
@@ -210,8 +325,8 @@ this list:
 - The ownCloud Client always excludes files containing characters that cannot
  be synchronized to other file systems.

- Files are removed that cause individual errors three times during a 
-  synchronization. However, the client provides the option of retrying a 
-  synchronization three additional times on files that produce errors.
+- Files are removed that cause individual errors three times during a synchronization. 
+  However, the client provides the option of retrying a synchronization three additional 
+  times on files that produce errors.

 For more detailed information see :ref:`ignored-files-label`.
@@ -45,9 +45,9 @@ Other command line switches supported by ``owncloudcmd`` include the following:
 Credential Handling
 ~~~~~~~~~~~~~~~~~~~

-``owncloudcmd`` uses the credentials of the GUI synchronization client.
-If no client is configured, or if you choose to use a different user to synchronize,
-you can specify the user
+By default, ``owncloudcmd`` reads the client configuration and uses the 
+credentials of the GUI synchronization client. If no client is configured, or if 
+you choose to use a different user to synchronize, you can specify the user 
 password setting with the usual URL pattern.  For example::

  $ owncloudcmd / https://carla:secret@server/owncloud/remote.php/webdav/
@@ -90,7 +90,7 @@ Other issues can affect synchronization of your ownCloud files:
 Log Files
 ---------

-Effectively debugging software requires as much relevant information as can be
+Effectively debugging software requires as much relative information as can be
 obtained.  To assist the ownCloud support personnel, please try to provide as
 many relevant logs as possible. Log output can help  with tracking down
 problems and, if you report a bug, log output can help to resolve an issue more
@@ -119,7 +119,7 @@ To obtain the client log file:

 5. Name the log file and click the 'Save' button.

-  The log file is saved in the location specifed.
+  The log files is saved in the location specifed.

 Alternatively, you can launch the ownCloud Log Output window using the
 ``--logwindow`` command. After issuing this command, the Log Output window
@@ -31,7 +31,7 @@ provides the following menu:
  since the last restart of ownCloud Client.
 * ``Settings...``: provides access to the settings menu.
 * ``Help``: Opens a browser to display this help.
-* ``Log out``: Logs the client out of the server.
+* ``Sign out``: Signs the client of of the server.
 * ``Quit ownCloud``: Quits ownCloud Client, ending a currently running
  sync run.

@@ -7,4 +7,3 @@ Comment=@APPLICATION_NAME@ desktop synchronization client
 GenericName=Folder Sync
 Icon=@APPLICATION_EXECUTABLE@
 Keywords=@APPLICATION_NAME@;syncing;file;sharing;
-X-GNOME-Autostart-Delay=3
@@ -179,8 +179,8 @@ static OwnCloudFinderContentManager* sharedInstance = nil;
 {
 	//NSLog(@"%@", NSStringFromSelector(_cmd));

-	// We won't request the new state if it finds the path in _fileNamesCache
-	// Move all entries to _oldFileNamesCache so that they get re-requested, but
+	// We won't request the new state if if finds the path in _fileNamesCache
+	// Move all entries to _oldFileNamesCache so that the get re-requested, but
 	// still available while we refill the cache
 	[_oldFileNamesCache addEntriesFromDictionary:_fileNamesCache];
 	[_fileNamesCache removeAllObjects];
@@ -12,7 +12,7 @@
 		692C18A516660C4700BF6A53 /* ContextMenuHandlers.m in Sources */ = {isa = PBXBuildFile; fileRef = 692C18A416660C4600BF6A53 /* ContextMenuHandlers.m */; };
 		692C18A9166617F500BF6A53 /* IconOverlayHandlers.m in Sources */ = {isa = PBXBuildFile; fileRef = 692C18A8166617F500BF6A53 /* IconOverlayHandlers.m */; };
 		692C18AC1666392700BF6A53 /* MenuManager.m in Sources */ = {isa = PBXBuildFile; fileRef = 692C18AB1666392700BF6A53 /* MenuManager.m */; };
-		6993878616494C000044E4DF /* RequestManager.m in Sources */ = {isa = PBXBuildFile; fileRef = 6993878516494C000044E4DF /* RequestManager.m */; settings = {COMPILER_FLAGS = "-fobjc-arc"; }; };
+		6993878616494C000044E4DF /* RequestManager.m in Sources */ = {isa = PBXBuildFile; fileRef = 6993878516494C000044E4DF /* RequestManager.m */; };
 		69948B361636D50E0093B6CE /* ContentManager.m in Sources */ = {isa = PBXBuildFile; fileRef = 69948B351636D50E0093B6CE /* ContentManager.m */; };
 		8C37DD9F161593BD00016A95 /* FinderHook.m in Sources */ = {isa = PBXBuildFile; fileRef = 8C37DD9A161593BD00016A95 /* FinderHook.m */; };
 		8C37DDB2161593FF00016A95 /* Cocoa.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 8C37DDB1161593FF00016A95 /* Cocoa.framework */; };
@@ -49,7 +49,11 @@ static OwnCloudFinderRequestManager* sharedInstance = nil;

 - (void)dealloc
 {
+	[_syncClientProxy release];
+
 	sharedInstance = nil;
+
+	[super dealloc];
 }

 + (OwnCloudFinderRequestManager*)sharedInstance
@@ -132,11 +136,12 @@ static OwnCloudFinderRequestManager* sharedInstance = nil;
 {
 	// NSLog(@"Socket DISconnected! %@", [err localizedDescription]);

-	// clear the registered paths.
+	// clear the registered pathes.
+	[_registeredPathes release];
 	_registeredPathes = [[NSMutableDictionary alloc] init];
 	[_requestedPaths removeAllObjects];

-    // clear the caches in content manager
+    // clear the caches in conent manager
 	OwnCloudFinderContentManager *contentman = [OwnCloudFinderContentManager sharedInstance];
 	[contentman clearFileNameCache];
 	[contentman repaintAllWindows];
@@ -11,7 +11,7 @@

 EXPORT OSErr HandleLoadEvent(const AppleEvent* ev, AppleEvent* reply, long refcon);

-static NSString* globalLock = @"I'm the global lock to prevent concurrent handler executions";
+static NSString* globalLock = @"I'm the global lock to prevent concruent handler executions";

 // SIMBL-compatible interface
@interface OwnCloudShell : NSObject { }
@@ -72,7 +72,7 @@
 	_remoteEnd = (NSDistantObject <ChannelProtocol> *)tx;
 	[_remoteEnd setProtocolForProxy:@protocol(ChannelProtocol)];

-	// Everything is set up, start querying
+	// Everything is set up, start querrying
 	[self askOnSocket:@"" query:@"SHARE_MENU_TITLE"];
 }

--- a/Mostrar Mais
+++ b/Mostrar Mais
Autor	SHA1	Mensagem	Data
Daniel Molkentin	57b65242e3	Make version check test conditional for now	2015-08-07 12:46:55 +02:00
Olivier Goffart	a1a66f8eda	Fixup `ce5be89a18`	2015-08-07 11:13:31 +02:00
Daniel Molkentin	866c21664b	ownSql: Do not use sqlite3 method not present in older version Was only used for debug output anyway and broke RHEL/CentOS6	2015-08-07 10:53:18 +02:00